00:14.14 | *** join/#openjtag ka6sox-away (n=ka6sox@204.16.19.246) |
00:22.25 | *** join/#openjtag rwhitby (n=nnnnnnnr@nslu2-linux/rwhitby) |
01:01.50 | *** join/#openjtag ka6sox-away (n=ka6sox@204.16.19.246) |
01:22.06 | *** join/#openjtag juanpaul (n=juan@189-20-46-67.asernet.com.br) |
04:17.35 | *** join/#openjtag nm_ (n=nm@222.252.68.30) |
04:26.05 | *** part/#openjtag ka6sox-away (n=ka6sox@204.16.19.246) |
04:30.22 | *** join/#openjtag nm (n=nm@222.252.68.30) |
07:42.35 | *** join/#openjtag nm (n=nm@58.187.25.197) |
08:17.12 | *** join/#openjtag pleemans (n=peter@d51A5E76A.access.telenet.be) |
10:11.27 | sn9 | drath: i figured it out |
10:26.13 | drath | hey sn9 |
10:26.15 | drath | what was the problem? |
10:26.39 | sn9 | there were two |
10:28.01 | sn9 | the correct settings were "parport_cable wiggler" and "reset_config srst_only combined" |
10:28.28 | sn9 | also, the jumpers on the wiggler need a specific combination |
10:28.49 | drath | heh, ok |
10:29.06 | sn9 | one of them selects whether TDO goes to pin 11 or pin 13 |
10:29.34 | sn9 | the docs had its positions reversed |
10:29.43 | drath | d'oh |
10:30.37 | sn9 | two select reset pins |
10:31.14 | sn9 | also, the EN line on the device turned out to really be srst |
12:05.01 | *** join/#openjtag Chocobo (n=swinchen@strongbad.eece.maine.edu) |
16:53.50 | *** join/#openjtag purl (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
16:53.50 | *** topic/#openjtag is this is the place to discuss bootloaders and JTAG |
16:57.05 | *** join/#openjtag p2-mate (n=p2@cable-87-244-173-194.upc.chello.be) |
17:44.14 | blogic | drath: can you mail me a postal address that we can mail the fpga kit to ? |
18:17.13 | drath | hey blogic |
18:39.32 | *** join/#openjtag Chocobo (n=swinchen@strongbad.eece.maine.edu) |
20:13.45 | prpplague | drath: sorry, been swampped, yea no references to m5960 and for the readme mark it as *TinCanTools Flyswatter USB JTAG programmer |
20:14.14 | prpplague | drath: we are doing a "sister" company that we retail some of our in house designs |
20:14.42 | prpplague | drath: first product release later this month will be the hammer board - http://www.elinux.org/Hammer_Board |
21:07.38 | *** join/#openjtag drath_ (i=vmaster@p5B07F5CA.dip.t-dialin.net) |
21:37.00 | prpplague | drath: you get my last message? |
22:47.52 | *** join/#openjtag dot (n=ka6sox@201.203.102.34) |
22:50.24 | *** join/#openjtag Bitmaster (n=Bitmaste@c-2a62e253.325-1-64736c12.cust.bredbandsbolaget.se) |