| 00:08.41 | *** join/#nslu2-linux copperbeech-log (~copperbee@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |
| 00:30.37 | rwhitby-web | Just got a note from my Linksys/Cisco contact in Australia: |
| 00:31.21 | rwhitby-web | "Has been a while, hope things are going well :). Just wanted to drop you a line and commend you on the very interesting work you and others have been doing on the NSLU2 developments - quite amazing the range of different projects that have been put together for it." |
| 00:32.29 | jacques | heh |
| 00:32.30 | rwhitby-web | So it seems that Linksys/Cisco Australia at least are aware of, and in approval of, the nslu2-linux project. |
| 00:41.50 | kergoth | cool |
| 00:42.11 | kergoth | so has anyone other than me tried the native compilation in an oe rootfs? |
| 00:42.15 | kergoth | any openslug confirmations? |
| 00:42.25 | kergoth | i'd like to see that perl config.sh actually tested |
| 00:44.04 | kergoth | i should buy some power strips and ethernet cables, anda ctually plug my slug in :P |
| 00:45.21 | *** part/#nslu2-linux hanjo (~hanjo@pD9E77F2E.dip.t-dialin.net) |
| 00:53.02 | *** join/#nslu2-linux perlguru-away (~perlguru@cc444495-a.hnglo1.ov.home.nl) |
| 01:13.07 | *** join/#nslu2-linux KsiLaptop (~ksilebo@d47-69-56-108.try.wideopenwest.com) |
| 01:39.01 | CIA-12 | 03dereky 07 * r1.3037.1.1 10openembedded/packages/linux/openslug-kernel_2.6.11.bb: change command line assignment, remove /deb/slug hack |
| 01:40.22 | [g2] | rwhitby-web, really on the Linksys/Cisco ? |
| 01:41.49 | rwhitby-web | Yes, really. |
| 01:47.04 | *** join/#nslu2-linux ByronT-Away (~byron-por@ByronT.nslu2-linux) |
| 01:53.01 | peteru-home | rwhitby-lunch: I wonder if I should talk to your Cisco/Linksys contact about ordering a hundred or so NSLU2s with unslung pre-installed :-) |
| 01:53.59 | peteru-home | I guess I'll need to roll together an unslung-thin-puppy.img variant... |
| 01:54.55 | *** join/#nslu2-linux jacques_ (~jacques@c-67-171-198-193.client.comcast.net) |
| 01:55.15 | [g2] | peteru-home, are you interested in quantity 100 ? |
| 01:56.18 | peteru-home | may be. I've been asked to prototype a NSLU2 based solution for automated EPG delivery to the toppy. |
| 01:56.59 | peteru-home | if it goes commercial, there would probably be an initial run of 20-100 units and then we'd see if people want to buy it. |
| 01:57.25 | [g2] | I just got the gateworks device today |
| 01:57.49 | peteru-home | the biggest challenge is getting 802.11 added. so far my research has not located any 802.11g USB dongles that might work with the NSLU2 |
| 01:57.54 | [g2] | They OEM boards and it's probably more toward your liking |
| 01:58.13 | [g2] | actually that *easy*, as this has 2 mini pci slogs |
| 01:58.17 | [g2] | slots |
| 01:58.43 | [g2] | there a myriad of mini pci A/B/G solutions |
| 01:59.59 | peteru-home | yeah, the atheros mini-pci seems in a good state. netgear ship it in their broadcom/mips based WGT634U |
| 02:00.00 | [g2] | peteru-home, depending on speed you could even put two radios in for full duplex |
| 02:01.04 | peteru-home | I need to squeeze a max of 20mbit/s from the box. |
| 02:02.00 | peteru-home | the toppy USB2.0 port won't go any faster than that - not sure if it's the NetChip or the Toppy drivers, but it's very slow. |
| 02:08.44 | [g2] | peteru-home, this has 2 minipci's and another has 4, I've been looking around at minipci USB2.0 boards |
| 02:09.06 | [g2] | one of the interesting things is that a platform like this allows one to mix and match a little |
| 02:09.49 | [g2] | another option I'll be trying is the Gigabit Ethernet cards and maybe some real IDE/SATA/RAID chipsets |
| 03:28.53 | *** join/#nslu2-linux ChanServ (ChanServ@services.) |
| 03:28.53 | *** mode/#nslu2-linux [+o ChanServ] by irc.freenode.net |
| 03:29.24 | *** join/#nslu2-linux _chris_ (~chris@pcp09943963pcs.hyatsv01.md.comcast.net) |
| 04:11.59 | *** join/#nslu2-linux siddy-away (~sid@slug.6bone.siddy.org) |
| 04:21.01 | *** join/#nslu2-linux novacane_22 (~NSLU2-IRC@blk-137-104-28.eastlink.ca) |
| 04:30.51 | *** part/#nslu2-linux rwhitby-web (www-data@rwhitby.nslu2-linux) |
| 05:19.12 | *** join/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 06:38.29 | *** part/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 08:26.54 | ka6sox-away | nite |
| 08:44.43 | *** join/#nslu2-linux hanjo (~hanjo@pD9E77F2E.dip.t-dialin.net) |
| 08:53.18 | *** join/#nslu2-linux mkoster1605 (~mirc@cc444495-a.hnglo1.ov.home.nl) |
| 09:22.27 | rwhitby-away | New picture of slug-central: http://nslu2-linux.thestuffguy.com/gallery/slug-central/IMGP3299?full=1 |
| 09:47.58 | *** join/#nslu2-linux hanjov (~hanjo@pD9E766BB.dip.t-dialin.net) |
| 10:12.06 | *** join/#nslu2-linux smok (~richard@clyne.plus.com) |
| 10:13.04 | *** join/#nslu2-linux perlguru (~maurice@cc444495-a.hnglo1.ov.home.nl) |
| 10:20.02 | *** join/#nslu2-linux dyoung_ (~dyoung@cpe-70-93-27-157.hawaii.res.rr.com) |
| 10:41.56 | *** join/#nslu2-linux Wipmac (drfonk@J975f.j.pppool.de) |
| 10:42.33 | Wipmac | hi all. any clue whats wrong if all of a sudden the samba-share seems no longer accessible on the net? all the other things ok. |
| 10:42.42 | Wipmac | smbd running |
| 11:17.45 | Wipmac | ipkg update gives me this |
| 11:17.46 | Wipmac | ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-oxQhr7 http://ipkg.nslu2-linuxDownloading http://ipkg.nslu2-linux.org/feeds/unslung/native/Packages.gz |
| 11:17.51 | Wipmac | any clues? |
| 11:34.35 | perlguru | df |
| 11:36.44 | Wipmac | 97% free on sda2 |
| 11:37.06 | Wipmac | it used to be 100%, but i removed some stuff with ipkg remove |
| 11:38.05 | perlguru | how much space left on / |
| 11:38.34 | Wipmac | sda1 52% full |
| 11:38.48 | Wipmac | and on / 81 % used |
| 11:40.35 | dyoung | Are you sure your name resolution is setup right? |
| 11:40.50 | Wipmac | no. how could i check that? |
| 11:40.54 | perlguru | ping |
| 11:41.04 | Wipmac | ping the nslu2? working |
| 11:41.18 | perlguru | ping ipkg.nslu2-linux.org |
| 11:41.32 | perlguru | from the nslu |
| 11:42.15 | Wipmac | ping: ipkg.nslu2-linux.org: Host name lookup failure |
| 11:42.23 | dyoung | There you go. |
| 11:42.24 | Wipmac | so name resolution is false |
| 11:42.35 | Wipmac | hrm. where do i set that right? |
| 11:42.42 | perlguru | DNS settings |
| 11:42.46 | perlguru | in web interface |
| 11:43.07 | perlguru | check all network related settings |
| 11:43.19 | perlguru | this might also explain your samba problem |
| 11:43.44 | Wipmac | but when wanting to change these in the webinterface i get a samba failure |
| 11:44.57 | perlguru | something is wrong. check all settings |
| 11:45.08 | *** join/#nslu2-linux smok (~richard@clyne.plus.com) |
| 11:47.21 | Wipmac | always failing to get samba information on the web-interface |
| 11:47.57 | dyoung | cd /etc; mv CGI_ds.conf CGI_ds.conf.old; reboot |
| 11:51.31 | Wipmac | still failed to get samba information |
| 11:55.17 | Wipmac | manually entered the missing data in the CGI_ds.conf in /etc. after reboot nslu2 deleted these data. |
| 11:56.02 | Wipmac | any clue what went wrong |
| 11:56.15 | Wipmac | ? |
| 11:56.32 | dyoung | found the wiki page for resetting your sysconf? |
| 11:56.53 | Wipmac | i will try that. |
| 11:57.13 | dyoung | GL. |
| 11:57.31 | Wipmac | bye |
| 12:15.59 | *** join/#nslu2-linux rwhitby-nslu2 (~rwhitby@rwhitby.nslu2-linux) |
| 12:23.00 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 12:37.11 | *** join/#nslu2-linux handzisk (~handzisk@svetlana.tkn.TU-Berlin.DE) |
| 12:41.56 | *** join/#nslu2-linux smok (~richard@clyne.plus.com) |
| 12:42.38 | *** join/#nslu2-linux smok_ (~richard@clyne.plus.com) |
| 13:40.25 | handzisk | kergoth: I am still fighting with the openslug build: NOTE: package ixp425-eth-1.1-r1: task do_patch: failed |
| 13:46.41 | *** join/#nslu2-linux bob_tm (~chatzilla@254.80-203-34.nextgentel.com) |
| 13:47.19 | handzisk | NOTE: made /var/store/src/slug/build/tmp/work/ixp425-eth-1.1-r1 to projectdir by creating .patches/ |
| 13:47.19 | handzisk | NOTE: import patch 'ixp425_eth_1_1_update_nf_bridge.patch' as 'ixp425_eth_1_1_update_nfbridge' |
| 13:47.20 | handzisk | NOTE: import patch 'ixp425_eth.c.patch' as 'ixp425eth.c' |
| 13:47.20 | handzisk | NOTE: please refresh this patch, line-numbers have changed |
| 13:47.21 | handzisk | NOTE: please check ixp425_eth.c.rej |
| 13:52.50 | *** join/#nslu2-linux bob_tm_ (~chatzilla@254.80-203-34.nextgentel.com) |
| 15:14.38 | CIA-12 | 03g2 07 * r1.3046.1.1 10openembedded/ (12 files in 3 dirs): Fix perferred version to actually match the kernel we are using. I think BB/OE needs the extra .2 in the name |
| 16:05.53 | *** join/#nslu2-linux handzisk (~handzisk@svetlana.tkn.TU-Berlin.DE) |
| 16:41.36 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-092-095.arcor-ip.net) |
| 16:42.49 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:44.39 | *** join/#nslu2-linux ogpTweety-l (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:46.21 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:48.36 | *** join/#nslu2-linux gpTweety-lodent (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:49.49 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:50.41 | *** join/#nslu2-linux cbrake (~cbrake@mail.accelent.com) |
| 16:53.09 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:54.24 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:55.38 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:56.52 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 16:58.03 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:00.16 | *** join/#nslu2-linux gpTweety-loe (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:01.28 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:03.41 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:04.28 | *** join/#nslu2-linux kolla_ (kolla@firda.uninett.no) |
| 17:05.53 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:07.09 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 17:23.17 | *** join/#nslu2-linux Wipmac (drfonk@Jbad3.j.pppool.de) |
| 17:24.19 | Wipmac | my nslu2-sambe seems to be fxxxed: Fail to get samba information. did already resetconfig, overwrite CGI.thing in /etc. nogo. whats the next step? |
| 17:25.47 | kolla_ | what does "Enter Maintenance Mode" really do? |
| 17:26.34 | Wipmac | ..rebooting in maintanance mode now.. |
| 17:26.46 | Wipmac | dont i have to turn the drive off for that? |
| 17:27.35 | kolla_ | *shrug* |
| 17:27.45 | kolla_ | I want to downgrade from 3.18 to 2.x |
| 17:27.50 | Wipmac | anyways, drive is on, rebooting in maintanance mode..and then? |
| 17:28.04 | Wipmac | why wanna downgrade? |
| 17:28.20 | kolla_ | 8MB / is a mess |
| 17:28.40 | Wipmac | 8mb is the place for /share/hdd/conf? |
| 17:29.26 | Wipmac | well..rebooted in maintanance mode..and now? |
| 17:31.21 | kolla_ | access the webinterface I guess |
| 17:31.34 | kolla_ | at least, that's what it says on the wiki |
| 17:32.07 | Wipmac | true..for me it doesnt help me with the samba problem |
| 17:33.16 | kolla_ | I dont get it, why did you enter maintainance mode to fix samba? |
| 17:33.55 | Wipmac | cuz i misinterpreted you |
| 17:34.04 | kolla_ | aha |
| 17:34.10 | Wipmac | just dunno how to fix that samba thing |
| 17:34.15 | kolla_ | maintenance... hm |
| 17:35.22 | kolla_ | I just asked what entering maintenance mode actually means, I feel like downgrading my nslu2 at home with 2.12 |
| 17:35.52 | Wipmac | sure. ijust was a bit too fast ;) |
| 17:35.56 | kolla_ | :) |
| 17:36.21 | kolla_ | so, what did maintencance mode mean for you? |
| 17:37.01 | ByronT-Away | Wipmac, to correct the fail to get samba information, you need to do a reflash, followed by a reset sysconf, (all without HD attached) |
| 17:37.07 | Wipmac | wahtever..its just the correct way to go if u wanna downgrade |
| 17:37.29 | kolla_ | ByronT-Away: do you know what "maintenance mode" involves? |
| 17:37.41 | kolla_ | resetting with root on ramdisk? |
| 17:37.50 | ByronT-Away | and the german nslu2 group said that sometimes doing this 3-4 times in a row is needed to really correct the problem |
| 17:38.01 | kolla_ | heh |
| 17:38.14 | kolla_ | reflasing multiple times? nah, sounds like bad flash ram :) |
| 17:38.27 | ByronT-Away | kolla_- 8MB / is not a problem - since the folders such as /opt are symlinked to hd partitions |
| 17:38.41 | ByronT-Away | and with unslung EVERYTHING should go under /opt |
| 17:38.48 | Wipmac | byron: that wont make me lose any data on the nslu2-hdd right? |
| 17:38.58 | kolla_ | ByronT-Away: yeah well, I decide that for myself, dont I :) |
| 17:39.20 | ByronT-Away | Wipmac, you should be doing the reflash, and resetting sysconf without hd attached |
| 17:39.36 | kolla_ | same for me I guess |
| 17:39.42 | Wipmac | byron: no re-unslung necessary=? |
| 17:39.45 | kolla_ | better wait till I get home and can inplug the disk then |
| 17:39.52 | kolla_ | unplug |
| 17:39.52 | ByronT-Away | if you have hd attached, the sysconf (that is the problem) will pull the bad information FROM the hd |
| 17:40.17 | kolla_ | what if you unmount first? |
| 17:40.21 | ByronT-Away | and yes, you will need to re-unsling after each reflash, reset sysconf iteration |
| 17:40.47 | ByronT-Away | kolla_, you're free to do with your nslu2 what you want to... |
| 17:40.49 | Wipmac | byron: and all this process wont delete my data on /share/hdd/public/data . ok.. |
| 17:41.15 | ByronT-Away | of course, we're free to take any direction with unslung and openslug that we want to.... |
| 17:41.37 | ByronT-Away | yes, wipmac - unsling does not touch /data |
| 17:41.48 | Wipmac | byron: another prob i had was that /share/hdd/conf was finally 100% full. any way to change that? it was not SO much ipkg's i have installed.. |
| 17:41.55 | kolla_ | yesterday I tared /share/hdd to nfs and moved /opt to point the the nfs-opt, created a swap file on nfs, moved swap over there, unmounted the usb disk, repartitioned it and remoformattet new filesystems, and move back |
| 17:41.58 | kolla_ | moved |
| 17:42.07 | ByronT-Away | yeah, you can change the /conf size.... search the wiki |
| 17:42.39 | kolla_ | ByronT-Away: I just wonder what happens if I "enter maintenance mode" :) |
| 17:43.04 | kolla_ | guess I could follow the javascript/cgi code to find out, hunm |
| 17:43.19 | ByronT-Away | and see what script it calls |
| 17:43.43 | kolla_ | yes, I'm there now |
| 17:44.06 | kolla_ | looks like it means booting to ramdisk |
| 17:44.24 | ByronT-Away | Wipmac, check this link *AFTER* you correct the fail to get samba information... http://www.nslu2-linux.org/wiki/HowTo/CustomSizedPartitions |
| 17:44.29 | kolla_ | touch /.ramdisk |
| 17:44.32 | kolla_ | that's what it does |
| 17:44.35 | kolla_ | and then reboots |
| 17:44.36 | kolla_ | right |
| 17:44.52 | Wipmac | thx byron. openslug isnt out a s binary yet is it฿ |
| 17:44.53 | Wipmac | ฿ |
| 17:44.56 | Wipmac | ? |
| 17:46.03 | ByronT-Away | nope, we're still wading through license issues |
| 17:46.52 | kolla_ | what is it that keep restarting services even when I "/opt/etc/init.d/SXXservice stop"? |
| 17:46.59 | ByronT-Away | kolla_, why don't you build openslug or unslung 4.x if 3.18 isn't working for you? |
| 17:47.03 | kolla_ | perhaps it's in the faq.. oh well |
| 17:47.12 | *** join/#nslu2-linux caplink811 (~Joerg@dsl-082-082-083-134.arcor-ip.net) |
| 17:47.32 | kolla_ | ByronT-Away: why bother if 2.12 works? I dont know :) |
| 17:47.34 | ByronT-Away | anyways, these questions should really be out of unslung dev channel |
| 17:47.41 | ByronT-Away | ~nslu2-general |
| 17:47.42 | jbot | #nslu2-general is the IRC channel specifically set up for end-user questions about the NSLU2 device. Questions that are not related to the nslu2-linux development projects should not be asked in #nslu2-linux, but should be asked in #nslu2-general instead. |
| 17:47.59 | kolla_ | heh, never heard of -general before |
| 17:48.17 | ByronT-Away | kolla_, because stuff gets fixed in later versions but not in earlier revisions.... |
| 17:48.23 | kolla_ | topic here is wrong then :) |
| 17:48.26 | kolla_ | "Discussion about modifying the Linux operating system on the Linksys NSLU2" |
| 17:49.50 | kolla_ | ByronT-Away: I'm too lazy to dumb to understand the oe buildt system, ask kergoth :) |
| 17:49.56 | kolla_ | lazy and dumb |
| 17:50.02 | ByronT-Away | I've got to go... good luck on the fixes, wipmac... |
| 17:50.39 | *** join/#nslu2-linux ka6sox (~ka6sox@netblock-66-159-209-52.dslextreme.com) |
| 17:51.31 | ByronT-Away | kolla_, you really don't want me to respond to that, do you? the devs and I have spent quite a few hours - for nothing other than our and other's enjoyment - to create and develop the community |
| 17:52.01 | ByronT-Away | leaving! later all |
| 17:55.23 | kolla_ | hm, I must have communication problems |
| 17:56.58 | Wipmac | l8er byron thx |
| 17:59.48 | *** join/#nslu2-linux Gorx (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) |
| 18:00.11 | Gorx | yo got a prob with cups - how do you get it to start when the slug boots |
| 18:00.12 | Gorx | ? |
| 18:02.30 | Wipmac | jesus, i reflashed, resetsysconf, re-unlsung and my sambe still aint werking..weired.. |
| 18:03.43 | Gorx | wool |
| 18:04.00 | Gorx | did you downgrade to the old skool linksys firmware? |
| 18:04.29 | Wipmac | nope |
| 18:04.40 | Wipmac | reflashed 3.18 |
| 18:05.01 | Gorx | no no get linksys firmware R25 and boot into redboot |
| 18:05.12 | Gorx | and then upgrade using the upgadwe utility |
| 18:05.28 | Gorx | and then unsling the disk and everying |
| 18:05.34 | Gorx | look on the wiki its been updates |
| 18:05.38 | Gorx | updated* |
| 18:06.05 | Wipmac | so not just reflash from 3.17 to 3.18, if samba is broken? grr... |
| 18:06.34 | Gorx | no, no has to be my way i had the same prob yesterda |
| 18:06.49 | Wipmac | grrr.. :) |
| 18:07.05 | Wipmac | i think i may go the way kolla went..just install 2.12.. |
| 18:07.39 | Gorx | or just do the way i tell you to |
| 18:07.49 | Gorx | you ever had cups on ur slug? |
| 18:08.04 | Wipmac | never |
| 18:08.11 | Gorx | :S |
| 18:08.28 | Wipmac | but u see, its a hassle having samba broken every month and not knowing why.. |
| 18:08.50 | Gorx | lol |
| 18:16.57 | Wipmac | gorx: so i telnet into redboot now and install r25 linksys fw with this tool. yes? |
| 18:18.12 | Gorx | ya |
| 18:31.38 | Gorx | hello? |
| 18:33.29 | Gorx | hello? |
| 18:34.10 | Wipmac | gorx: that sertool-thing u used? |
| 18:34.31 | Gorx | yus |
| 18:34.40 | Wipmac | how that work? |
| 18:35.24 | Wipmac | when i go on browse targets he cant find nuttin |
| 18:35.37 | Wipmac | then i go on files and chose a firmware? |
| 18:35.52 | Wipmac | nxt i type upgrade in redboot=? |
| 18:36.09 | Gorx | yus |
| 18:36.47 | Wipmac | nuttin happenin..nslu2 blinkin red |
| 18:37.09 | Wipmac | as i said that tool cant find a device! |
| 18:37.24 | Gorx | And you ve got into redboot? |
| 18:37.28 | Wipmac | sure |
| 18:37.50 | Gorx | and typed upgrade and pressed enter? |
| 18:37.54 | Wipmac | yep |
| 18:38.13 | Wipmac | ill try a tftp tool |
| 18:38.37 | Gorx | k |
| 18:38.40 | *** join/#nslu2-linux ByronT-Away (~byron-por@ByronT.nslu2-linux) |
| 18:38.52 | Wipmac | ok, then i flash the old r25 (ehere can i get that?), and via web-page i next flash 3.18? |
| 18:39.21 | Gorx | yep |
| 18:40.24 | Wipmac | when do i reset sysconfg? |
| 18:40.54 | Gorx | look in thw iki |
| 18:41.35 | Wipmac | since i cant find r25 i just use that upgrade tool and go for 3.18 :) |
| 18:47.11 | *** join/#nslu2-linux Wipmac_ (~fonk@Jbad3.j.pppool.de) |
| 18:49.26 | *** join/#nslu2-linux gpTweety-lo2 (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 18:50.04 | Gorx | any 1? I need help with cups |
| 18:51.38 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 18:53.06 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 18:55.43 | *** join/#nslu2-linux hanjo (~hanjo@pD9E766BB.dip.t-dialin.net) |
| 19:14.34 | *** join/#nslu2-linux [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 19:17.10 | Gorx | hello? |
| 19:18.44 | hanjo | hi |
| 19:19.21 | Gorx | how would i make /opt/etc/init.d start at boot? |
| 19:20.33 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:22.45 | *** join/#nslu2-linux gpTweety-loa (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:24.57 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:27.10 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:28.23 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:30.35 | *** join/#nslu2-linux gpTweety-lo (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:31.38 | hanjo | hi all |
| 19:31.49 | *** join/#nslu2-linux pTweety-log (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:32.08 | hanjo | can someone try to bb ixp425-eth and see if you also get errors during patching? |
| 19:41.37 | [cc]smart | Pull bk://nslu2-linux.bkbits.net/openembedded |
| 19:41.37 | [cc]smart | <PROTECTED> |
| 19:41.37 | [cc]smart | ERROR-Can't get read lock on the repository. |
| 19:41.37 | [cc]smart | pull: remote locked, trying again... |
| 19:42.48 | [cc]smart | ah, now it works |
| 19:43.09 | [cc]smart | does this happen during somebody writing to the repository ? |
| 19:43.32 | jacques | [cc]smart, yes |
| 19:43.40 | jacques | sometimes ppl with slow uplinks are writing |
| 19:43.50 | jacques | try again in a few minutes |
| 19:44.16 | [cc]smart | ok, works again, thx |
| 19:44.21 | jacques | np |
| 19:47.30 | hanjo | anyone that tried the bb ixp425-eth thing? |
| 19:47.48 | [cc]smart | on the way |
| 19:48.42 | Gorx | hi |
| 19:48.58 | Gorx | gotta problem with priner.o at startup |
| 19:49.04 | [g2] | hanjo, I rebuilt the kernel this morning and ixp.. last night |
| 19:49.05 | Gorx | i dont think it starta |
| 19:49.22 | [g2] | but it wasn't a full clean build where I wipe /tmp |
| 19:49.42 | hanjo | g2: arrrgh |
| 19:49.53 | [g2] | arrgh what ? |
| 19:49.57 | [g2] | :) |
| 19:50.04 | hanjo | it seems to be working for you guys |
| 19:50.22 | [g2] | well I haven't done a full clean build in a week or something like that |
| 19:50.23 | Gorx | gotta problem with priner.o at startup |
| 19:50.29 | Gorx | i dont think it started |
| 19:50.55 | hanjo | this is limited to the ixp |
| 19:51.12 | hanjo | the whole toolchain and the kernel went fine |
| 19:51.14 | [g2] | hanjo, I asked you a question in #oe, which repo are you pulling from and when was your last pull ? |
| 19:51.42 | hanjo | Pull bk://nslu2-linux.bkbits.net/openembedded |
| 19:51.43 | hanjo | <PROTECTED> |
| 19:52.08 | hanjo | and I did the last pull couple of minutes ago |
| 19:52.10 | [cc]smart | hanjo: with "on the way" i mean i'm on the way to find out if it works |
| 19:52.46 | [g2] | hanjo, and what error to you get ? |
| 19:52.56 | hanjo | then I did: bb -c clean ixp425-eth |
| 19:53.18 | VoodooZ_work | [g2]: you should do a full build soon as it's broken. jacques got it too. |
| 19:53.43 | hanjo | the ethhdr.patch is failing |
| 19:54.00 | *** join/#nslu2-linux pTweety (~pTweety@dialin-212-144-060-047.arcor-ip.net) |
| 19:54.09 | Gorx | gotta problem with priner.o at startup |
| 19:54.56 | [g2] | bb -c clean ixp425-eth ixp4xx |
| 19:55.11 | Gorx | ? |
| 19:55.27 | [g2] | Gorx, I'm talking to hanjo |
| 19:55.33 | Gorx | k soz beed |
| 19:55.34 | Gorx | beef |
| 19:55.57 | hanjo | g2: trying just now |
| 19:56.16 | [g2] | ok isn't not ixp4xx... |
| 19:56.39 | [g2] | bb -c clean ixp425-eth ixp4xx-csr |
| 19:59.49 | [g2] | NOTE: Applying patch 'ethhdr' |
| 20:00.07 | [g2] | OTE: package ixp425-eth-1.1-r1: task do_build: started |
| 20:00.07 | [g2] | NOTE: package ixp425-eth-1.1-r1: task do_build: completed |
| 20:00.07 | [g2] | NOTE: package ixp425-eth-1.1: completed |
| 20:00.07 | [g2] | NOTE: build 200503111457: completed |
| 20:00.49 | hanjo | NOTE: Applying patch 'ethhdr' |
| 20:00.49 | hanjo | ERROR: function do_patchcmd failed |
| 20:00.49 | hanjo | ERROR: see log in /var/store/src/slug/tmp/work/ixp425-eth-1.1-r1/temp/log.do_patchcmd.327 |
| 20:01.14 | kergoth | heh |
| 20:01.20 | hanjo | anyhow |
| 20:01.23 | hanjo | tnx all |
| 20:01.23 | kergoth | are there \r's in that patch or code? |
| 20:01.26 | [g2] | and cat'ing /var/store/src/slug/tmp/work/ixp425-eth-1.1-r1/temp/log.do_patchcmd.327 sys ? |
| 20:01.40 | kergoth | random patch application failures can be caused by quilt stripping \r's that are needed when patching sources that were edited in windows |
| 20:01.45 | hanjo | NOTE: import patch '/var/store/src/slug/nslu2-package-symlinks/packages/ixp425-eth/files/ethhdr.patch' as 'ethhdr' |
| 20:01.45 | hanjo | ERROR: patch did not apply, try again with force (-f -i ...) |
| 20:01.48 | kergoth | just a random possibility |
| 20:02.01 | hanjo | I am using patcher |
| 20:02.21 | kergoth | heh |
| 20:02.23 | kergoth | quilt strips out \r's |
| 20:02.25 | kergoth | patcher doesnt. |
| 20:02.27 | kergoth | quilt is the one thats broken |
| 20:02.37 | kergoth | but i'm betting [g2]'s quilt is "fixing" the broken patch. |
| 20:02.52 | kergoth | try doing a dos2unix on the patch |
| 20:03.42 | *** join/#nslu2-linux smok (~richard@clyne.plus.com) |
| 20:05.48 | [g2] | kergoth, the ethhdr.patch looks fine to me as in now \r just 0xA |
| 20:06.30 | hanjo | I'll try to do this on another box |
| 20:06.32 | hanjo | strange |
| 20:07.02 | [g2] | hanjo, you are doing something different clearly if you are using patcher |
| 20:07.22 | [g2] | we've been using quilt for what seems like forever (4 weeks or something) |
| 20:07.59 | hanjo | g2: but with quilt I was not able to bb even a single package |
| 20:08.24 | kergoth | sounds like your system has problems |
| 20:08.32 | kergoth | or your'e building in windows under cygwin or something |
| 20:08.34 | kergoth | heh |
| 20:08.49 | [g2] | jacques, VoodooZ_work did you guys just try a clean build ? |
| 20:09.08 | hanjo | I'll switch to quilt just for this package and see what happens |
| 20:09.42 | hanjo | no, this is just a plain FC2 with all the updates |
| 20:09.51 | kergoth | odd. |
| 20:10.19 | hanjo | the only change was moving to patch 2.5.9 |
| 20:10.29 | hanjo | but that was while trying to "solve" the problem |
| 20:10.30 | hanjo | :) |
| 20:10.38 | hanjo | anyhow, tnx for the help |
| 20:11.01 | [g2] | hanjo, on a different topic.... EHCI.... There's a little news |
| 20:11.10 | Gorx | gotta problem with priner.o at startup |
| 20:11.19 | VoodooZ_work | [g2]: I always do clean builds. that's why I always find problems. |
| 20:11.40 | [g2] | VoodooZ_work, you always changes stuff too, so it's 50/50 :) |
| 20:11.56 | hanjo | g2: yes? |
| 20:12.00 | [g2] | VoodooZ_work, what's happening with your build |
| 20:12.13 | VoodooZ_work | Actually, I haven't changed a single thing in 1 month as there's too much stuff changing in openslug lately so I'm waiting for it to stabilize a little. |
| 20:12.44 | VoodooZ_work | findutils fails to configure. |
| 20:13.06 | kergoth | i just built findutils a few minutes ago |
| 20:13.12 | kergoth | not for armeb, but that isnt likely to affect a package like that |
| 20:13.43 | jacques | I also have the findutils problem |
| 20:13.51 | jacques | might be automake related according to the log |
| 20:13.51 | kergoth | but hell, my machine is patched all to hell, so who knows |
| 20:14.09 | jacques | tho it's always hard to tell with auto* stuff - their error messages are not the best |
| 20:14.47 | [g2] | hmmmm I did do a pull from oe-devel this morning |
| 20:15.05 | kergoth | ah, my findutils is fixed locally |
| 20:15.07 | VoodooZ_work | I doubt it's my build either as It's a stock repo copy that I keep pulling in everyday |
| 20:15.09 | kergoth | couldve sworn i pushed that one |
| 20:15.13 | VoodooZ_work | hehehe |
| 20:15.15 | jacques | heh |
| 20:15.56 | [g2] | bk sfiles -x is your friend :) |
| 20:16.26 | kergoth | :) |
| 20:16.28 | kergoth | indeed it is |
| 20:17.45 | hanjo | can someone point me to the place where patcher/quilt binaries reside in the tree? |
| 20:18.00 | [g2] | packages/quilt |
| 20:18.15 | [g2] | quilt-native |
| 20:18.48 | [g2] | ok it's a hatrick on findutils |
| 20:20.15 | [g2] | hanjo, So I was testing devices on a powered usb 2.0 hub and I got a different failure on the HD |
| 20:20.27 | [g2] | I got a SCSI error |
| 20:21.01 | Gorx | gotta problem with priner.o at startup |
| 20:21.26 | [g2] | they would only happen when I had another device in the the hub like my usb-ethernet |
| 20:21.28 | hanjo | g2: I have character devices on the hub |
| 20:21.49 | hanjo | g2: can't help much with HD |
| 20:22.05 | [g2] | hanjo, it was FYI |
| 20:22.23 | hanjo | Just wanted to say, that I have not seen it before |
| 20:22.39 | [g2] | and if you are thinking about ordering many units, you may want to check out www.gateworks.com |
| 20:22.55 | [g2] | I've got a little board I'm running now |
| 20:25.31 | hanjo | g2: looks interesting. I'm working for a german university, and purchasing here is an art in itself.. better left to professionals :) |
| 20:31.05 | Gorx | gotta problem with priner.o at startup |
| 20:32.26 | Gorx | any1 know how to make it start at startup? |
| 20:44.09 | [g2] | kergoth, do we need to beg for the findutils fix ? |
| 20:49.09 | *** join/#nslu2-linux j0n (j0n3z@spc1-derb3-4-0-cust93.bagu.broadband.ntl.com) |
| 20:54.59 | pTweety | hi all, is it ok if I update the rsync.mk to look more like the default template (including rsync-stage target)? |
| 20:55.53 | pTweety | I would need this change for rsnapshot |
| 21:07.32 | [g2] | kergoth got an ETA on the findutils ? |
| 21:14.04 | kergoth | whenever i get to it, i'm at work |
| 21:14.36 | [g2] | ok thx |
| 21:15.03 | kergoth | definately today, just not sure when |
| 21:15.33 | [g2] | ok |
| 21:25.22 | Gorx | any1 know ow to get telnet on all the time so i dont have to on that gay page? |
| 21:26.12 | ByronT-Work | search the wiki! |
| 21:26.19 | ByronT-Work | ~nslu2-general |
| 21:26.20 | jbot | #nslu2-general is the IRC channel specifically set up for end-user questions about the NSLU2 device. Questions that are not related to the nslu2-linux development projects should not be asked in #nslu2-linux, but should be asked in #nslu2-general instead. |
| 21:26.49 | Gorx | oh its on there? |
| 21:26.55 | Gorx | couldnt find it |
| 21:27.05 | ByronT-Work | before asking in channel SEARCH the WIKI |
| 21:28.44 | *** join/#nslu2-linux ByronT-Work (~byron-por@ByronT.nslu2-linux) |
| 21:35.26 | CIA-12 | 03ptweety * 10unslung/ (make/rsync.mk sources/rsync/control): updated rsync.mk to look more like the default template |
| 21:37.51 | CIA-12 | 03ptweety * 10unslung/ (Makefile make/rsnapshot.mk sources/rsnapshot/rsnapshot.conf): rsnapshot is ready for native only testing. |
| 21:45.18 | Gorx | cant find it |
| 21:45.29 | Gorx | any1 know how to get telnet on all the time? |
| 21:48.51 | *** join/#nslu2-linux gaydar (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) |
| 21:48.57 | gaydar | hey |
| 21:49.28 | giel | *beep* *beep* *beep* |
| 21:49.29 | gaydar | gotta prob with cups and printer.o |
| 21:49.45 | gaydar | it wont load and i have to manually start it at boot |
| 21:55.26 | glc | Gorx, who do you think you are kidding? You were told the answer, told to go to nsuu2-general, told what you need to do. You ignore answers and ask the same questions over and over. |
| 21:55.51 | kergoth | thank god for /ignore |
| 21:56.02 | gaydar | ? |
| 22:06.04 | ByronT-Work | Gorx has been kick banned from nslu2-general |
| 22:08.58 | ByronT-Work | with good reason |
| 22:09.34 | glc | Some people are incapable of learning. |
| 22:09.45 | [g2] | what ? |
| 22:10.00 | glc | Not you. |
| 22:10.10 | ByronT-Work | glc can tell if I was justified... |
| 22:10.12 | [g2] | Huh ? |
| 22:11.04 | glc | Yes, I was wondering when it would finally happen. Rod kicked him off here but didn't ban him. |
| 22:13.28 | ByronT-Work | ack! battery death in laptop... back later! |
| 22:14.00 | *** join/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 22:21.06 | *** part/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 22:22.48 | *** join/#nslu2-linux ByronT-Sick (byrontodd@ByronT.nslu2-linux) |
| 22:24.46 | *** join/#nslu2-linux ByronT (byrontodd@ByronT.nslu2-linux) |
| 22:34.07 | *** join/#nslu2-linux gorkster (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) |
| 22:34.19 | gorkster | any1 know how to start services on the slug? |
| 22:34.57 | rwhitby-away | yeah. "dd if=/dev/zero of=/dev/mtdblock0 bs=1024 count=1" |
| 22:35.24 | [g2] | rwhitby-away, I was using a usb 2.0 hub today |
| 22:35.40 | [g2] | disk and ethernet adapter worked fine |
| 22:36.20 | gorkster | cool |
| 22:36.36 | [g2] | gorkster, have you checked the wiki ? |
| 22:36.51 | gorkster | about starting services? |
| 22:37.31 | glc | gorkster, have you checked the wiki ? |
| 22:37.54 | gorkster | yes |
| 22:39.18 | [g2] | "start services" paypal, daemons, ??? |
| 22:39.50 | [g2] | Unslung 3.x, Unslung 4.x, Openslug, other ? |
| 22:40.13 | rwhitby-away | gorkster: BTW, don't do what I said .... |
| 22:40.24 | gorkster | lol k |
| 22:44.17 | [g2] | rwhitby-away, |
| 22:44.20 | [g2] | drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 |
| 22:44.20 | [g2] | drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303 |
| 22:44.20 | [g2] | pl2303 3-1.1:1.0: PL-2303 converter detected |
| 22:44.20 | [g2] | usb 3-1.1: PL-2303 converter now attached to ttyUSB0 |
| 22:44.20 | [g2] | usbcore: registered new driver pl2303 |
| 22:44.20 | [g2] | drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12 |
| 22:44.48 | [g2] | that was a hotplug |
| 22:45.40 | kergoth | hm |
| 22:45.48 | kergoth | speaking of hotplug, i should get around to splitting out hotplug-common one of these days |
| 22:45.51 | kergoth | heh |
| 22:46.41 | [g2] | kergoth after findutils is fixed and I do a clean build I was going to send out mail to ml list about building OpenSlug packages |
| 22:46.44 | dyoung-zzzz | [g2] did you read dsaxena's reply on the arm lk ml? |
| 22:47.05 | [g2] | dyoung-zzzz, from earlier today ? |
| 22:47.12 | [g2] | that it's a PCI problem |
| 22:47.27 | dyoung-zzzz | yeah that one. |
| 22:47.30 | [g2] | no |
| 22:47.40 | [g2] | just kidding :) |
| 22:47.51 | [g2] | sure |
| 22:48.24 | [g2] | I was impressed that dsaxena admitted it was an issue on all ixp4xx platforms and he was going to look into it |
| 22:48.36 | dyoung-zzzz | I wonder if we should mention to him the re-introduced bug for the expansion config base addr. |
| 22:49.08 | [g2] | When testing on the usb hub I got a different failure mode |
| 22:49.21 | [g2] | sure you can if you think that's correct |
| 22:49.22 | kergoth | [g2]: have you tested perl yet? |
| 22:49.34 | [g2] | kergoth, no :( |
| 22:49.43 | kergoth | jacques: have you? :) |
| 22:50.16 | jacques | sorry, I haven't |
| 22:50.25 | [g2] | kergoth, I'm happy that it builds, I think we can turn a bunch of users loose on packages |
| 22:50.35 | [g2] | and roll-up all the status on the wiki |
| 22:50.41 | kergoth | i'm pretty confident that its going to Just Work. |
| 22:50.59 | [g2] | I am too however, "Trust, but verify" |
| 22:51.21 | kergoth | have you seen uClibc++ |
| 22:51.22 | kergoth | ? |
| 22:51.28 | kergoth | its a c++ standard library thats _tiny_ |
| 22:51.37 | jacques | interesting |
| 22:51.38 | [g2] | cool |
| 22:51.38 | kergoth | its around 95K to libstdc++'s over 700 |
| 22:51.42 | jacques | wow! |
| 22:51.48 | kergoth | not sure how complete it is though |
| 22:51.54 | kergoth | i'm going to test it in oe's toolchain |
| 22:52.01 | kergoth | do a build with the uclibc++ g++ wrapper |
| 22:52.03 | kergoth | see how it turns out |
| 22:52.09 | rwhitby-away | [g2]: now try pumping data through the usb serial |
| 22:52.26 | dyoung-zzzz | [g2] http://groups.yahoo.com/group/nslu2-linux/message/1663 |
| 22:56.06 | [g2] | rwhitby-away I can cat out /dev/ttyUSB0 |
| 22:56.29 | [g2] | I don't get any data but I think I'm double null modemed |
| 22:58.24 | [g2] | rwhitby-away, you know set tty chant ? |
| 22:58.24 | jacques | dyoung-zzzz, hmm interesting post |
| 22:59.13 | dyoung-zzzz | Jacques, that was fixed in 2.6.10, but the bad value made it back into 2.6.11 . |
| 22:59.32 | Tiersten | hmm. great QA for the ARM branch then |
| 22:59.39 | jacques | dyoung-zzzz, so it was wrong in both 2.6 kernels we've tried? 2.6.9 and 2.6.11 ? |
| 22:59.52 | dyoung-zzzz | No, we are patching it. ;-) |
| 23:00.09 | jacques | did we patch it in 2.6.9 ? |
| 23:00.20 | ByronT | heading home... later all |
| 23:00.27 | jacques | later ByronT |
| 23:00.30 | [g2] | If it's really wrong then we should let the arm ml know and resubmit a patch |
| 23:00.38 | [g2] | see you ByronT |
| 23:01.05 | dyoung-zzzz | yeah, its patched in 2.6.9 too. |
| 23:01.15 | [g2] | dyoung-zzzz, I was seeing a different error failure via the hub today |
| 23:01.46 | dyoung-zzzz | back later. |
| 23:02.52 | dyoung-zzzz | Jacques, I got lost in the 582 page developers guide for the ixp42x yesterday, and now I'm just plain confused as to why we're running at halfspeed. |
| 23:03.01 | dyoung-zzzz | Will try to revisit it again today. |
| 23:03.22 | rwhitby-away | jacques: I'm starting a full rebuild now |
| 23:04.01 | [g2] | rwhitby-away, it'll die in findutils |
| 23:04.22 | rwhitby-away | kergoth hasn't pushed? |
| 23:05.03 | [g2] | rwhitby-away, he's at work, he will later |
| 23:05.10 | rwhitby-away | it'll take at least an hour for me to get there anyway |
| 23:13.21 | *** join/#nslu2-linux krieges-marine (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) |
| 23:13.25 | krieges-marine | hey peeps |
| 23:13.41 | [g2] | hi gorx |
| 23:14.00 | krieges-marine | who is gorx |
| 23:14.07 | [g2] | dunno |
| 23:14.14 | krieges-marine | well then |
| 23:14.23 | krieges-marine | why did you call me it |
| 23:15.45 | [g2] | just because you have the same IP addr as a guy before |
| 23:15.50 | [g2] | gorkster (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) has joined #nslu2-linux |
| 23:15.56 | [g2] | krieges-marine (~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com) has joined #nslu2-linux |
| 23:16.01 | krieges-marine | do you know how to make services atart like chkconfig --level 35 cups on |
| 23:16.10 | krieges-marine | yes grokster was me |
| 23:16.34 | Tiersten | *cough* gorx was ~NSLU2-IRC@cpc1-brmb1-3-0-cust185.bagu.cable.ntl.com |
| 23:17.07 | krieges-marine | oh maybe someone was on here before on my network |
| 23:17.13 | krieges-marine | anyway |
| 23:17.16 | krieges-marine | do you know how to make services atart like chkconfig --level 35 cups on |
| 23:17.35 | Tiersten | amazing how everybody that uses your NTL cable connection at home wants to know about CUPS and how to get it to start |
| 23:17.49 | [g2]-pizza | dunno about cups |
| 23:17.59 | [g2]-pizza | I'm digging throught kernel issues |
| 23:18.20 | [g2]-pizza | do you know about PCI bus arbitration ? |
| 23:18.35 | [g2]-pizza | I'm trying to lear |
| 23:18.37 | [g2]-pizza | n |
| 23:19.13 | krieges-marine | lol no and ive got all my office on teh case |
| 23:19.20 | Tiersten | office? |
| 23:19.23 | Tiersten | You're in the UK |
| 23:19.29 | Tiersten | It's 23:21 |
| 23:20.05 | krieges-marine | so? |
| 23:20.12 | krieges-marine | do you want my life story? |
| 23:20.12 | krieges-marine | lol |
| 23:20.15 | Tiersten | yes. thanks |
| 23:20.26 | Tiersten | why you and gorx always say peeps for one |
| 23:21.21 | krieges-marine | why do you always ask about my collegues dont you like gorx or something |
| 23:21.28 | Tiersten | bye |
| 23:21.55 | krieges-marine | ? |
| 23:22.19 | krieges-marine | cdo you know about starting services? |
| 23:23.01 | krieges-marine | or when you type /opt/etc/init.d start |
| 23:23.36 | krieges-marine | you get using /opt/lib/modules/printer.o |
| 23:26.14 | kergoth | heh, home now, but doing work work since i'm behind schedule :\ |
| 23:26.17 | kergoth | bleh |
| 23:26.28 | krieges-marine | wool |
| 23:55.32 | *** join/#nslu2-linux copperbeech-log (~copperbee@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |