| 00:00.50 | *** join/#htc-linux TheXev (user@54.sub-75-214-32.myvzw.com) |
| 00:04.05 | d3tul3 | WisTilt2, this guy http://pastebin.com/eNfdEzA6 ? |
| 00:04.28 | WisTilt2 | yeah thats it. |
| 00:04.30 | rpierce99 | i think my dmesg is too spammy, and since i can't adb during boot, i can't find "mask" in my dmesg |
| 00:04.55 | Willd | Don't you have last_kmsg? |
| 00:05.06 | rpierce99 | is that bigger than dmesg? |
| 00:05.07 | WisTilt2 | it will be around the 30second range of boot |
| 00:05.11 | Willd | rpierce99: I reckon so |
| 00:08.00 | rpierce99 | cat /proc/last_kmsg | grep mask (and gpu) returned nothing, am i doing this wrong? |
| 00:08.25 | Willd | Should have done it.. |
| 00:08.26 | WisTilt2 | make sure its build #9 |
| 00:08.51 | WisTilt2 | im sure i put the right one up there but who knows |
| 00:09.03 | rpierce99 | it's #9 |
| 00:09.06 | arrrghhh | rpierce99, how 'bout that command with /proc/kmsg |
| 00:09.10 | d3tul3 | rpierce99, adb usb support is in the autobuild |
| 00:09.29 | rpierce99 | i don't think WisTilt2 pulled it though did he? |
| 00:09.34 | WisTilt2 | you might have to run a 3d app to set it, but bootani should have done that |
| 00:09.51 | WisTilt2 | not in that build no. ill pull it now |
| 00:10.39 | d3tul3 | ok so in this derived table i don't see pll0/4 |
| 00:12.59 | WisTilt2 | highest pll0 freq is 245760 as its running. gpu register is defaulted at /4 from there |
| 00:14.05 | WisTilt2 | gpu divider isnt in that table btw, im looking at what its register is set to |
| 00:14.21 | d3tul3 | i need to get this document with these secret registers somehow |
| 00:15.43 | WisTilt2 | lol, well you can develop a device with this msm chip and they give it to you, of course you'll be spending quite a few $ |
| 00:16.02 | d3tul3 | i'm on it |
| 00:16.27 | arrrghhh | hah |
| 00:16.29 | WisTilt2 | they do a pretty good job of keeping the datasheet off the internet too |
| 00:16.36 | rpierce99 | i think i'm getting there on this grep, most of my time is spent inserting a pipe |
| 00:16.45 | rpierce99 | the osk doesn't want to come up for me :) |
| 00:16.50 | d3tul3 | doesn't fn + y work? |
| 00:16.56 | rpierce99 | <3 |
| 00:17.03 | arrrghhh | on f22's rootfs |
| 00:17.07 | arrrghhh | i don't think that made it to the autobuild |
| 00:17.10 | d3tul3 | it is |
| 00:17.10 | arrrghhh | did it? |
| 00:17.11 | WisTilt2 | rpierce99 im building you another build #10 that has the adb fix |
| 00:17.12 | rpierce99 | it's in this one |
| 00:17.13 | arrrghhh | oO |
| 00:17.15 | arrrghhh | nice |
| 00:20.21 | WisTilt2 | rpierce99 kernel is up with your mac adb fix |
| 00:20.31 | rpierce99 | tyvm :) |
| 00:20.56 | WisTilt2 | d3tul3 did all the work though, i just rebuilt:) |
| 00:21.05 | d3tul3 | watch it not work now |
| 00:23.17 | *** join/#htc-linux sykosoft (~sykosoft@67-61-60-19.cpe.cableone.net) |
| 00:23.39 | sykosoft | Was watching the logs. rpierce99, did you do a case insensitive grep using -i? |
| 00:23.51 | rpierce99 | haha no |
| 00:24.08 | arrrghhh | that's fancy talk |
| 00:24.15 | WisTilt2 | lol |
| 00:24.21 | WisTilt2 | it is all caps btw |
| 00:24.37 | rpierce99 | oh well, booting into adb kernel now |
| 00:26.19 | rpierce99 | [ 53.763122] GPU MASK: 2219ff2f |
| 00:26.19 | rpierce99 | [ 53.783081] GPU MASK: a99 |
| 00:26.30 | WisTilt2 | thats what i needed thanks |
| 00:26.44 | rpierce99 | <3 adb |
| 00:26.52 | WisTilt2 | thank god its the same on cdma as gsm |
| 00:27.50 | sykosoft | I noted a reversion to cfq as the io scheduler, but don't know why. Anyone know? |
| 00:28.53 | arrrghhh | sykosoft, i know emwe was messing with different schedulesr |
| 00:28.55 | arrrghhh | er |
| 00:28.56 | arrrghhh | yea |
| 00:29.07 | arrrghhh | schedulers. trying to see which one works best... |
| 00:29.17 | arrrghhh | the results seemed to differ depending on the underlying file system. |
| 00:29.31 | sykosoft | hmm, I'd be shocked if cfq actually performed better than deadline in most cases |
| 00:29.38 | sykosoft | but yes, filesystem would matter |
| 00:29.52 | sykosoft | given the nand type, no-op may be the fastest |
| 00:30.08 | arrrghhh | well most here are still on HaRET |
| 00:30.14 | arrrghhh | i guess SD cards still use NAND flash. |
| 00:30.15 | sykosoft | (was just about to say that) |
| 00:30.21 | arrrghhh | stupid misnomers. |
| 00:34.59 | sykosoft | Is glemsom's autobuild down? 500 error |
| 00:35.38 | arrrghhh | it was down the other day |
| 00:35.41 | arrrghhh | use the mirror |
| 00:35.46 | arrrghhh | (on incremental updates page) |
| 00:36.30 | sykosoft | hmm, it doesn't appear that the mirror also builds .39 |
| 00:36.37 | arrrghhh | it does not |
| 00:36.46 | arrrghhh | .39 hasn't built from glemsom's site in ages anyways... |
| 00:39.03 | arrrghhh | like, months |
| 00:39.19 | arrrghhh | i did mean to ping glemsom about the site being down tho |
| 00:40.21 | d3tul3 | arrrghhh, you're somewhere in the midwest right? ohio state fan? |
| 00:40.31 | arrrghhh | no, and no |
| 00:40.32 | arrrghhh | :P |
| 00:40.36 | arrrghhh | where'd that come from!?! |
| 00:41.17 | d3tul3 | just fishing for ohio state fans, need to talk smack with them tonight, guess wrong channel |
| 00:41.50 | arrrghhh | lol |
| 00:41.56 | arrrghhh | fair enough. i'm not a big sports guy... |
| 00:42.24 | arrrghhh | i play soccer, but get bored watching sports. hockey's fun to watch sometimes. |
| 00:43.28 | arrrghhh | sykosoft, not trying to start a war over LK, i just feel the way it is now is a much better compromise than how it was before... |
| 00:45.12 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 00:59.31 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 01:06.33 | d3tul3 | 21.0fps neocore |
| 01:09.59 | *** join/#htc-linux lnX\ (~n0kie@nelug/member/lnx) |
| 01:15.43 | sykosoft | oh, I'm not trying to start a war either. I have no say/sway in the matter. However, at least for my wife (rhod400 user just like me), it's definitely inconvenient |
| 01:16.02 | sykosoft | If it doesn't get better/change, then so be it, we're still better off |
| 01:20.58 | *** join/#htc-linux TheXev (user@54.sub-75-214-32.myvzw.com) |
| 01:25.33 | *** join/#htc-linux XirXes (~XirXes@67-2-24-4.slkc.qwest.net) |
| 01:31.50 | *** join/#htc-linux XirXes_ (~XirXes@67-2-15-82.slkc.qwest.net) |
| 01:31.51 | sykosoft | Is lk able to read the sd card? |
| 01:32.15 | sykosoft | Perhaps a config file allowing one to define behavior. Defaulting to fastboot when usb is plugged in. Allow that to be disabled. |
| 01:35.41 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 01:36.24 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
| 01:49.10 | crypticmofo | anyone got a good keyboard in mind ? |
| 01:49.15 | crypticmofo | i don't like this default keyboard |
| 01:58.09 | *** join/#htc-linux hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) |
| 02:03.44 | WisTilt2 | heading home guys. should have a test for you later tonight with a faster gpu. incorporating this into our existing code is, well, no comment. |
| 02:04.19 | arrrghhh | lol |
| 02:04.30 | arrrghhh | i'm going to go with "enthralling" |
| 02:06.11 | arrrghhh | sykosoft, everyone can contribute. like i said, if you have a better way to do it we're all ears. |
| 02:06.35 | arrrghhh | i don't see why you can't just charge with the device off, or wait for it to boot before plugging the charger in... |
| 02:18.19 | *** join/#htc-linux ellisway (~ellis@188-223-85-44.zone14.bethere.co.uk) |
| 02:46.06 | *** join/#htc-linux Rajko (~rajkosto@2001:470:d76b:da7a:d0a6:5870:cab8:4a50) |
| 02:46.15 | *** join/#htc-linux TheXev (user@54.sub-75-214-32.myvzw.com) |
| 02:47.13 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:d0a6:5870:cab8:4a50) |
| 02:47.39 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
| 02:49.51 | *** part/#htc-linux lnX\ (~n0kie@nelug/member/lnx) |
| 02:56.06 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:d0a6:5870:cab8:4a50) |
| 03:09.43 | *** join/#htc-linux bartman (~bart@2607:f2c0:a000:175:2e0:81ff:fe47:3d01) |
| 03:16.40 | jonpry | dur |
| 03:23.46 | arrrghhh | ? |
| 03:26.30 | jonpry | the latest problem is that i can only allocate gpu memory from a specific thread. and this happens to always be not the thread that things request it on |
| 03:26.58 | arrrghhh | naturally :P |
| 03:28.42 | d3tul3 | jonpry, you can't pass the fd somehow along |
| 03:28.46 | d3tul3 | dup? |
| 03:28.58 | jonpry | can't create the fd |
| 03:29.04 | d3tul3 | or keep a global heap? |
| 03:29.34 | jonpry | i have to get opengl to allocate the memory. and the opengl context is thread specific |
| 03:30.03 | jonpry | maybe not have to. but this is the architecture i think will work best |
| 03:30.59 | jonpry | so the context is really running on the surfaceflinger drawing thread. which is probably about the worst place it could be |
| 03:32.34 | d3tul3 | uh that sounds less than optimal, btw i like what emwe was saying about the defconfigs, perhaps it's a good idea to run msm_defconfig through menuconfig |
| 03:32.58 | d3tul3 | and try to make all subsequent changes via menuconfig? |
| 03:33.23 | d3tul3 | i know I am guilty of just sticking lines in there somewhat randomly |
| 03:33.24 | jonpry | i use xconfig. but that is my general method |
| 03:34.11 | jonpry | sticking things directly in the config has a good chance of shooting you in the foot |
| 03:34.56 | d3tul3 | i agree, part of the learning curve for me |
| 03:35.24 | jonpry | xconfig is very nice because it will explain why a particular option is not selectable |
| 03:35.40 | jonpry | like requires foo=y bar=n | bam=y |
| 03:36.01 | d3tul3 | menuconfig does something similar |
| 03:37.38 | jonpry | ah |
| 03:46.07 | d3tul3 | ..and apparently i can't get xconfig to work |
| 03:46.30 | arrrghhh | lol |
| 03:57.30 | *** join/#htc-linux dr1337 (~textual@112.97.96.58.static.exetel.com.au) |
| 03:59.28 | *** join/#htc-linux XeKToReX- (~xTx@CPE-124-188-18-211.hdbq1.win.bigpond.net.au) |
| 04:03.26 | *** join/#htc-linux bartman (~bart@2607:f2c0:a000:175:2e0:81ff:fe47:3d01) |
| 04:09.30 | d3tul3 | jonpry, hm menuconfig might be a bit too good, it takes out CONFIG_ARM because i guess it's not in any Kconfig, but i can't imagine CONFIG_ARM is not needed |
| 04:11.50 | d3tul3 | i see config_arm is added to .config by 'make ARCH=arm msm_defconfig' |
| 04:16.24 | *** join/#htc-linux frustro (~frustro@67.41.36.76) |
| 04:18.24 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
| 04:18.35 | arrrghhh | d3tul3, i'm in one of those GP_Timer slowdowns (i think) |
| 04:18.39 | arrrghhh | clock has seemingly stopped |
| 04:18.46 | d3tul3 | 39? |
| 04:18.48 | arrrghhh | won't wake worth a damn |
| 04:18.49 | arrrghhh | yea |
| 04:19.08 | arrrghhh | is there anything i can do to help diagnose? |
| 04:19.16 | d3tul3 | can you wake the screen at all? |
| 04:19.20 | arrrghhh | i did once |
| 04:19.28 | arrrghhh | having trouble waking it again... |
| 04:20.34 | d3tul3 | i think some of the recent IDLE stuff may have exacerbated how frequently these occur, though at the same time for me now they disappear when the screen cycles on/off |
| 04:20.44 | d3tul3 | _sometimes_ |
| 04:21.45 | arrrghhh | http://pastebin.com/KtH3Z1GC |
| 04:21.56 | arrrghhh | not sure if that'll help, but it's a dmesg |
| 04:21.56 | arrrghhh | got the phone to wake back up |
| 04:21.58 | arrrghhh | clock is still almost 90 minutes behind. |
| 04:23.02 | d3tul3 | whoa 've never seen this: [71282.627502] msm_i2c msm_i2c.0: Error waiting for notbusy (1) |
| 04:23.03 | d3tul3 | [71282.627563] msm_set_i2c_mux: NOT IMPLEMENTED |
| 04:23.21 | d3tul3 | is this a test kernel or just straight out of the autobuild? |
| 04:23.30 | WisTilt2 | problem i believe is in the clocks as i am deep into them with this gpu oc stuff. there are registers not being set fully that are probably causing a lot of this stuff |
| 04:24.31 | d3tul3 | at the same time the clocks used to be identical to 27 when we had JBs clocks and now they are identical to 35 and both those kernels dont see this |
| 04:24.33 | WisTilt2 | that i2c mux error starts right at boot when something tries setting up i2c device 0 that doesnt exist i think |
| 04:25.35 | WisTilt2 | arrrghhh im almost done with this gpu oc so ill have a test for you in a bit |
| 04:25.39 | arrrghhh | ok |
| 04:26.42 | arrrghhh | gonna go pickup some cancer to eat |
| 04:26.43 | arrrghhh | i'll bbl |
| 04:26.50 | arrrghhh | d3tul3, sorry test kernel |
| 04:27.08 | WisTilt2 | d3tul3 that i2c mux thing has been in .39 since i can remember. it errors right at the start of dmesg but i never pursued it, now i see wth is going on with these clock registers as we have them |
| 04:28.09 | d3tul3 | i have never seen that i2c mux error, and i've seen my share of .39 dmesg, certainly not in this obsessively repeating fashion |
| 04:28.38 | arrrghhh | heh |
| 04:28.49 | d3tul3 | when i was getting rid of the i2c write errors i got to a point where i would do a "dmesg | grep i2c" and return no hits so I am positive it hasn't been there forever |
| 04:32.23 | WisTilt2 | d3tul3: you've never seen any of this in .39? |
| 04:32.24 | WisTilt2 | [ 0.532623] msm_i2c_probe |
| 04:32.24 | WisTilt2 | [ 0.532836] msm_set_i2c_mux: NOT IMPLEMENTED |
| 04:32.25 | WisTilt2 | [ 0.532958] msm_i2c_probe: clk_ctl 35d, 100000 Hz |
| 04:32.25 | WisTilt2 | [ 0.533813] i2c i2c-0: Invalid 7-bit I2C address 0x00 |
| 04:32.25 | WisTilt2 | [ 0.533874] i2c i2c-0: Can't create device at 0x00 |
| 04:32.26 | WisTilt2 | [ 0.534088] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0 |
| 04:32.55 | d3tul3 | yeah sure i mean look at the log arrrghhh posted that error is choking his log |
| 04:33.31 | WisTilt2 | this is the root of it. arrrghhh which test kernel are you running? |
| 04:34.29 | d3tul3 | i wasn't clear I don't see i2c errors/messages past the boot |
| 04:36.30 | WisTilt2 | i need to finish this gpu oc then ill take a closer look at that mux register. we need to also get rid of that 30fps vsync limit because im now pegged at 30fps in neocore:) |
| 04:37.09 | d3tul3 | good man |
| 04:39.40 | servergod | this is my 5-6th visit to this chan, dont want to be off topic, but I feel smarter listening to you guys...I never talk here..ok, done with the adoration and imput. |
| 04:40.16 | d3tul3 | that (NOT_IMPLEMENTED) message is the correct return as it matches the return value of set_i2c_mux on both 35 and 27 |
| 04:44.10 | d3tul3 | also i2c-msm.c seems to be fine at first glance |
| 04:44.12 | arrrghhh | WisTilt2, sorry stepped out. i was running the mem OC kernel IIRC. |
| 04:44.15 | arrrghhh | would the kernel version help? |
| 04:44.59 | arrrghhh | WisTilt2, #48 |
| 04:45.19 | arrrghhh | g6be4e91 - although i think all the test kernels have that. |
| 04:45.19 | WisTilt2 | those kernels have all kinds of weird stuff in them so wouldn't go by them at this point. |
| 04:45.25 | arrrghhh | heh |
| 04:45.26 | arrrghhh | fair enough |
| 04:46.47 | d3tul3 | jonpry, menuconfig is doing some strange strange things, like it's taking out that IO_REMAP clutch config |
| 04:51.49 | d3tul3 | i am out goodnight folks |
| 04:52.21 | *** join/#htc-linux Rob2223 (~Miranda@p5DE4B7B9.dip.t-dialin.net) |
| 05:11.33 | *** join/#htc-linux swc|666 (~gecko@unaffiliated/swc666/x-4934821) |
| 05:14.15 | *** join/#htc-linux Bry8Star (~Bry8Star@gateway/tor-sasl/bry8star) |
| 05:27.16 | arrrghhh | servergod, lol i just read your comment on an xda article. |
| 05:28.14 | arrrghhh | WisTilt2, how goes it sir? |
| 05:28.42 | arrrghhh | did you see how the evo4g fixed the 30fps limit? i think you already talked to acl about it. |
| 05:28.46 | WisTilt2 | sorry, i mucked up the clock to the modem and backtracking what i did |
| 05:28.50 | arrrghhh | i think it was irrelevant to our device |
| 05:28.54 | arrrghhh | oic. np |
| 05:29.06 | WisTilt2 | comment on xda article? whats that |
| 05:29.16 | arrrghhh | irrelevant, sorry :P |
| 05:29.26 | arrrghhh | i was reading an article on the HD2 |
| 05:29.37 | arrrghhh | and servergod commented on the article |
| 05:30.05 | WisTilt2 | gotcha. yeah we really need to lift that limit if we can |
| 05:30.24 | arrrghhh | someone sent me the evo patch, if you are interested. |
| 05:30.31 | arrrghhh | IIRC acl said it was useless for us tho. |
| 05:31.22 | arrrghhh | http://htc-linux.org/wiki/index.php?title=Novatek_NT35582/FPS_Hack |
| 05:31.26 | arrrghhh | evidently it's just a hack |
| 05:32.47 | WisTilt2 | yeah but our panels only support 50-70hz so we are still somewhat limited |
| 05:36.28 | arrrghhh | i see |
| 05:39.17 | WisTilt2 | ok i think i found it so we should have smoke coming out of this thing this build if we're lucky |
| 05:39.38 | arrrghhh | :) |
| 05:44.16 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:d0a6:5870:cab8:4a50) |
| 05:46.23 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-75.dynamic.mnet-online.de) |
| 06:03.46 | WisTilt2 | arrrghhh, i need to make a kernel for your phone to verify a couple registers are the same so this oc doesnt mess up anything if they're not the same. |
| 06:05.33 | arrrghhh | that's fine |
| 06:09.14 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-75.dynamic.mnet-online.de) |
| 06:20.33 | arrrghhh | poop. it's late... i should go to bed. |
| 06:21.34 | arrrghhh | WisTilt2, sorry man. tried to hold out. gotta get up early tomorrow... i'll read up on the logs, or you can always email me. take it easy, talk to you tomorrow ;) |
| 06:21.36 | WisTilt2 | sorry, this is not cooperating with the modem clk. ill get it to you tomorrow |
| 06:21.43 | WisTilt2 | np, sorry to hold you so long |
| 06:21.47 | arrrghhh | np man, it happens. |
| 06:21.52 | WisTilt2 | didnt expect the modem issue |
| 06:21.56 | arrrghhh | lol i was just watching futurama. don't sweat it. |
| 06:22.10 | WisTilt2 | ill catch ya tomorrow |
| 06:22.32 | arrrghhh | sounds good, g'nite |
| 06:23.00 | rpierce99 | i'm still around for a bit if you need a rhod |
| 06:23.03 | rpierce99 | w |
| 06:23.17 | WisTilt2 | i need a 400 in my hand is what i need:) |
| 06:23.36 | WisTilt2 | i can have you try this once i fix what i did to mess it up |
| 06:24.45 | *** join/#htc-linux lipp[a] (~lippa@ppp118-209-98-131.lns20.mel4.internode.on.net) |
| 06:30.17 | *** join/#htc-linux Ondalf (~ondalf@unaffiliated/ondalf) |
| 06:42.46 | WisTilt2 | rpierce99: ok i have that test kernel up. grep dmesg for MASK. also run neocore just to make sure it runs and looks normal. you should only be around 20fps or so with this one. |
| 06:45.16 | rpierce99 | [ 52.440704] MASK0: 2219ff27 |
| 06:45.16 | rpierce99 | [ 52.460662] MASK1: 2219ff2f |
| 06:45.16 | rpierce99 | [ 52.460693] MASK0: 3a84 |
| 06:45.17 | rpierce99 | [ 52.480621] MASK1: 3a84 |
| 06:45.22 | rpierce99 | still booting, neocore in a sec |
| 06:46.09 | WisTilt2 | that looks good |
| 06:48.40 | rpierce99 | runs like normal, no textures cuz i'm not running the new egl stuffs |
| 06:51.50 | WisTilt2 | need to get the lib fixes. im putting 1 more test up, need that same mask info if you can. let me make sure it finishes booting first |
| 06:53.55 | WisTilt2 | ok its up and good to go |
| 06:54.02 | *** join/#htc-linux sykosoft (~sykosoft@67-61-60-19.cpe.cableone.net) |
| 06:54.04 | sykosoft | WisTilt2, how long do you need a rhod400 for? I have one without service, would that suffice? You can hold on to it for a few months, but I would like it back eventually (it's a spare) |
| 06:55.15 | WisTilt2 | sykosoft that would be great if its just sitting around. dont need service, just need to work out some of these cdma differences |
| 06:55.32 | WisTilt2 | probably a couple weeks would be enough |
| 06:55.38 | sykosoft | it is just sitting around. I use my rhod400 internationally, and refuse to upgrade, so it's a spare |
| 06:55.45 | sykosoft | and both me and wife carry rhod400s |
| 06:55.53 | WisTilt2 | what u located? |
| 06:56.02 | sykosoft | Idaho |
| 06:56.51 | WisTilt2 | if you get on tomorrow ping me and ill give you info to get it here |
| 06:57.04 | sykosoft | Sounds good |
| 06:57.23 | WisTilt2 | thanks, was about to look for one on ebay just to have for this |
| 06:57.50 | sykosoft | Also, does anyone know for sure if all rhods use the same battery? |
| 06:58.08 | WisTilt2 | that i dont know |
| 06:58.36 | sykosoft | I'll see if I can send an extra battery in case you want to mod it for power measurements |
| 06:58.58 | WisTilt2 | if it takes the same i have plenty and one already modded for that |
| 06:59.09 | sykosoft | I'll look into it |
| 06:59.41 | *** join/#htc-linux Mavy (mavfree@unaffiliated/mavy) |
| 07:00.02 | WisTilt2 | thanks. i wont have to take so much time from arrrghhh and rpierce99. they have put many hours in tracing things for me on those 400's |
| 07:00.10 | *** join/#htc-linux ychavan (ychavan@nat/redhat/x-celhmzwcvzjelxkw) |
| 07:00.19 | sykosoft | sure, no problem |
| 07:00.33 | sykosoft | Right now, I'm running winmo on one, and acl's nand on another |
| 07:00.35 | rpierce99 | wouldn't be so bad if the time difference wasn't such a PITA :) |
| 07:00.59 | WisTilt2 | time diff is a problem for sure |
| 07:07.01 | WisTilt2 | rpierce99 did that last one blow up your phone? |
| 07:07.16 | rpierce99 | oh you said you wanted to make sure it booted, sorry |
| 07:07.17 | rpierce99 | lol |
| 07:07.35 | rpierce99 | oh missed the next msg |
| 07:08.06 | WisTilt2 | i do that frequently |
| 07:11.46 | rpierce99 | grep MASK again? |
| 07:12.24 | WisTilt2 | yep |
| 07:12.27 | rpierce99 | [ 47.851562] MASK0: 2019ff27 |
| 07:12.27 | *** join/#htc-linux bukington (~bukington@fac34-2-82-228-151-145.fbx.proxad.net) |
| 07:12.27 | rpierce99 | [ 47.871520] MASK1: 2019ff2f |
| 07:12.27 | rpierce99 | [ 47.871520] MASK0: 2a84 |
| 07:12.28 | rpierce99 | [ 47.891479] MASK1: 2a84 |
| 07:12.57 | WisTilt2 | ok thats good too |
| 07:13.05 | rpierce99 | i kexeced on this one, #34 is correct? |
| 07:13.11 | WisTilt2 | yes |
| 07:13.23 | rpierce99 | sweet, <3 having adb and kexec |
| 07:14.24 | WisTilt2 | how are you kexec'ing cmd line? |
| 07:15.06 | rpierce99 | huh? what i meant was i couldn't adb push before, no way to get kernel onto sd card, so now adb push + kexec = good |
| 07:16.37 | WisTilt2 | saves a lot of time and glad detule figured out that mac prob with adb |
| 07:22.50 | *** join/#htc-linux toastcfh (~toastcfh@41-32.200-68.tampabay.res.rr.com) |
| 07:23.22 | sykosoft | looks like the batteries are the same |
| 07:23.48 | WisTilt2 | nice. |
| 07:26.00 | *** join/#htc-linux kiozen (~kiozen@p5DDF2ABC.dip.t-dialin.net) |
| 07:32.42 | rpierce99 | anything else quickly before i head to bed WisTilt2 ? |
| 07:33.23 | WisTilt2 | no that is good for now. i still have a conflict with the modem clock so ill work on it tomorrow. thanks again as usual:) |
| 07:33.33 | rpierce99 | yep, gnight |
| 07:33.58 | WisTilt2 | im out too. sykosoft thanks again on the 400 and ill catch you tomorrow |
| 08:01.56 | *** join/#htc-linux lamikr (lamikr@nat/nokia/x-dzttdfbxfkllzzkn) |
| 08:25.09 | *** join/#htc-linux balans2 (~user@82-170-217-205.ip.telfort.nl) |
| 08:45.03 | *** part/#htc-linux sykosoft (~sykosoft@67-61-60-19.cpe.cableone.net) |
| 08:52.04 | *** join/#htc-linux mes (~mes@24.69.210.121) |
| 09:07.32 | *** join/#htc-linux LjL (~ljl@unaffiliated/ljl) |
| 09:15.11 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 09:57.33 | *** join/#htc-linux mitsutaka (~mitsutaka@KHP222227247006.ppp-bb.dion.ne.jp) |
| 10:04.45 | *** join/#htc-linux gauner1986 (~Miranda@87.253.171.209) |
| 10:13.29 | *** join/#htc-linux balans2 (~user@82-170-217-205.ip.telfort.nl) |
| 10:24.52 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-jhxbfubkwtpuwpxy) |
| 11:04.21 | *** join/#htc-linux ychavan (ychavan@nat/redhat/x-aqgyubxhtduvcsos) |
| 11:06.40 | *** join/#htc-linux balans2 (~user@82-170-217-205.ip.telfort.nl) |
| 11:07.10 | *** join/#htc-linux lamikr (lamikr@nat/nokia/x-fmgqpvlhrrcqdxkz) |
| 11:57.40 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:f183:1393:4233:9d2c) |
| 12:02.46 | *** join/#htc-linux ychavan (ychavan@nat/redhat/x-qwafpdyqkcayxyiu) |
| 12:04.01 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 12:11.40 | *** join/#htc-linux NetRipper (~netripper@tikkie.net) |
| 12:13.37 | *** join/#htc-linux ychavan (ychavan@nat/redhat/x-mxpamrwighzacdbo) |
| 12:38.34 | *** join/#htc-linux infernix (nix@unaffiliated/infernix) |
| 12:46.55 | *** join/#htc-linux Sandvold (~Sandvold@213.236.244.131) |
| 12:47.49 | *** join/#htc-linux Andreyxxl1 (~Andreyxxl@94.52.236.39) |
| 12:53.57 | *** join/#htc-linux Sandvold (~Sandvold@213.236.244.131) |
| 13:02.51 | *** join/#htc-linux GNUtoo (~gnutoo@host40-58-dynamic.116-80-r.retail.telecomitalia.it) |
| 13:07.19 | *** join/#htc-linux bikerer (~bike@ti0128a380-dhcp0338.bb.online.no) |
| 13:16.22 | *** join/#htc-linux bartman (~bart@2607:f2c0:a000:175:2e0:81ff:fe47:3d01) |
| 13:29.31 | *** join/#htc-linux detule (~detule@hw-ma-6l13f61.mat.jhu.edu) |
| 13:31.28 | *** join/#htc-linux Sandvold (~Sandvold@207.80-202-111.nextgentel.com) |
| 13:36.56 | *** join/#htc-linux lardman|work (~lardman@138-38-179-9.docking.bath.ac.uk) |
| 13:37.54 | lardman|work | ~seen lkcl |
| 13:38.03 | apt | lkcl <~lkcl@host86-131-183-114.range86-131.btcentralplus.com> was last seen on IRC in channel #arm-netbook, 151d 11h 45s ago, saying: 'night. or... morning. ouch :)'. |
| 13:38.12 | lardman|work | oh |
| 13:38.30 | lardman|work | Anyone here have any info about PowerVR USSE opcodes/assembly? |
| 13:53.12 | *** join/#htc-linux toastcfh (~toastcfh@unaffiliated/toastcfh) |
| 14:08.21 | *** join/#htc-linux vinceweis (4463ed13@gateway/web/freenode/ip.68.99.237.19) |
| 14:20.13 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 14:24.43 | *** join/#htc-linux rzk (~rzk@95-24-54-101.broadband.corbina.ru) |
| 14:26.45 | *** join/#htc-linux paulk (~paulk@lib33-1-82-233-88-171.fbx.proxad.net) |
| 14:28.07 | *** join/#htc-linux TheXev (nat32@1.sub-75-242-112.myvzw.com) |
| 14:41.26 | *** join/#htc-linux helicopter88 (~helicopte@188.11.59.253) |
| 14:41.27 | *** join/#htc-linux newbie (~helicopte@188.11.59.253) |
| 14:41.30 | *** join/#htc-linux newbie1 (~helicopte@188.11.59.253) |
| 14:47.55 | *** join/#htc-linux TheXev (nat32@1.sub-75-242-112.myvzw.com) |
| 14:48.50 | *** join/#htc-linux bikerer (~bike@ti0128a380-dhcp0338.bb.online.no) |
| 14:54.11 | *** join/#htc-linux rzk (~rzk@95-24-54-101.broadband.corbina.ru) |
| 14:57.01 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 15:00.41 | *** join/#htc-linux crypticmofo (~crypticmo@c-67-164-217-108.hsd1.ca.comcast.net) |
| 15:28.08 | *** join/#htc-linux kiozen (~kiozen@p5DDF2ABC.dip.t-dialin.net) |
| 15:29.44 | *** join/#htc-linux emwe (~mweirauch@cable-86-56-10-252.cust.telecolumbus.net) |
| 15:31.36 | *** join/#htc-linux LordDeath (~LordDeath@xdsl-87-78-106-12.netcologne.de) |
| 15:34.44 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 15:36.16 | *** join/#htc-linux EdLin (~EdLin@securabit/listener/edlin) |
| 15:45.55 | *** join/#htc-linux mitsutaka (~mitsutaka@KHP222227247006.ppp-bb.dion.ne.jp) |
| 16:36.59 | *** join/#htc-linux Cotulla (~myfakemai@nat100-255-205-109.tvoe.tv) |
| 16:37.27 | Cotulla | hi |
| 16:38.34 | *** join/#htc-linux kiozen_ (~kiozen@p5DDF2ABC.dip.t-dialin.net) |
| 16:40.11 | *** join/#htc-linux x1o (57f54144@gateway/web/freenode/ip.87.245.65.68) |
| 16:40.33 | *** part/#htc-linux x1o (57f54144@gateway/web/freenode/ip.87.245.65.68) |
| 16:42.28 | *** join/#htc-linux kiozen (~kiozen@p5DDF2ABC.dip.t-dialin.net) |
| 16:42.47 | arrrghhh | Cotulla, what's up |
| 16:43.45 | *** join/#htc-linux mastermerlin (~Adium@pD9E2EA77.dip.t-dialin.net) |
| 16:49.07 | *** join/#htc-linux kiozen (~kiozen@p5DDF2ABC.dip.t-dialin.net) |
| 16:51.08 | *** join/#htc-linux [acl] (~abel@96.246.167.90) |
| 16:51.19 | [acl] | Cotulla: my good man.. got a minute ? |
| 16:51.38 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless251.wirelesstcp.net) |
| 17:00.40 | arrrghhh | WisTilt2, how goes it |
| 17:00.44 | Cotulla | yeah |
| 17:01.53 | WisTilt2 | morning arrrghhh |
| 17:03.07 | WisTilt2 | arrrrghhh does neocore run in winmo and if so what kind of fps? |
| 17:04.38 | [acl] | Cotulla: just wanted to compare some notes with you |
| 17:04.43 | Cotulla | notes? |
| 17:04.47 | Cotulla | okay |
| 17:04.59 | [acl] | Cotulla: about gsm panel. You are on a rhod210 right ? |
| 17:05.27 | Cotulla | my is T-Mobile from USA, without front camera |
| 17:05.39 | [acl] | Cotulla: i have no idea what that is |
| 17:05.41 | [acl] | lol |
| 17:05.44 | rpierce99 | it's a 210 |
| 17:05.46 | [acl] | coo |
| 17:05.57 | Cotulla | tell me SMEM address where it stored I don't remember it |
| 17:06.06 | [acl] | Cotulla: for rhod 300 the vregs for panel are 11 and 13. I just wanted to see if it was the same for 210 |
| 17:06.13 | arrrghhh | WisTilt2, i don't know of any benchmark apps on winmo. neocore won't run for sure. |
| 17:06.15 | rpierce99 | Cotulla: its under the battery |
| 17:06.18 | arrrghhh | i'll see what i can dig up |
| 17:06.39 | Cotulla | lol |
| 17:06.39 | WisTilt2 | just wanted some kind of comparison but no biggie |
| 17:06.49 | [acl] | Cotulla: im sure by now you got the whole panel shit sorted out.. so spill the beans :-p |
| 17:06.54 | Cotulla | rpierce99, epic |
| 17:06.58 | Cotulla | let me check |
| 17:07.28 | Cotulla | NM8RHOD210 |
| 17:07.30 | *** join/#htc-linux crypticmofo (~crypticmo@c-67-164-217-108.hsd1.ca.comcast.net) |
| 17:07.30 | Cotulla | lol really |
| 17:08.17 | arrrghhh | WisTilt2, perhaps this will help...? http://forum.xda-developers.com/wiki/index.php?title=Developing_a_graphics_driver_for_Windows_Mobile |
| 17:08.47 | [acl] | Cotulla: spill it !!! |
| 17:09.04 | Cotulla | w00t? |
| 17:09.30 | [acl] | Cotulla: vregs yo.. same on 210 as 300? just wanna make sure. |
| 17:09.35 | Cotulla | beans? |
| 17:09.42 | [acl] | lol |
| 17:10.21 | Cotulla | I don't know about vregs exactly |
| 17:10.28 | [acl] | how is this possible? |
| 17:10.40 | arrrghhh | fake Cotulla |
| 17:10.40 | Cotulla | I am using modified code from .27 :) |
| 17:10.46 | Cotulla | but if same rom runs on both devices |
| 17:10.48 | Cotulla | Rhodium |
| 17:10.52 | Cotulla | so it must be same too |
| 17:11.04 | [acl] | Cotulla: i havent even submitted the patch for vreg on .27 |
| 17:11.04 | Cotulla | 300 is GSM too? |
| 17:11.11 | [acl] | Cotulla: yeah gsm too |
| 17:11.20 | [acl] | Cotulla: whats on .27 now is wrong |
| 17:11.22 | arrrghhh | Cotulla, 100, 110, 210 & 300 are all GSM only. |
| 17:11.42 | [acl] | Cotulla: anyways, so you arent powering down the panel i take it. |
| 17:11.49 | Cotulla | wait |
| 17:12.20 | Cotulla | I remember when we turns on GPS panel turns off |
| 17:13.07 | Cotulla | but same WM rom can work on both devices |
| 17:13.11 | Cotulla | so vregs also must be same |
| 17:13.14 | Cotulla | right? |
| 17:13.38 | emwe | different codepaths per variant? |
| 17:13.50 | Cotulla | wait |
| 17:14.07 | emwe | [acl]: i can confirm vreg 3/4 and 11/13 kill data for me on sleep quite immedeately on suspend. |
| 17:14.20 | [acl] | emwe: but thats on cdma right |
| 17:14.20 | emwe | (RHOD400 for those forgetting like me) |
| 17:14.27 | emwe | running GSM |
| 17:14.29 | Cotulla | disptools.dll |
| 17:15.26 | Cotulla | MDDI_Bridge_PowerUp |
| 17:15.59 | Cotulla | they touch only BIT_PM_VREG_RFTX BIT_PM_VREG_RFRX2 from comments |
| 17:16.02 | Cotulla | but maybe they lie |
| 17:16.03 | [acl] | yup |
| 17:16.07 | [acl] | no thats right |
| 17:16.17 | Cotulla | 0x800 & 0x2000 |
| 17:16.20 | Cotulla | masks |
| 17:16.28 | Cotulla | GPIO82 |
| 17:16.31 | [acl] | 11 and 13 |
| 17:16.35 | [acl] | like i said |
| 17:16.44 | [acl] | so you confirm thats on 210 as well.. awesome.. |
| 17:16.44 | Cotulla | ya |
| 17:16.50 | [acl] | now thos poor bastards 100 |
| 17:16.52 | [acl] | will suffer |
| 17:16.54 | Cotulla | it's inside disptools.dll |
| 17:17.01 | Cotulla | and rom can work on 210 too |
| 17:17.08 | Cotulla | it's GSM rom dump |
| 17:17.09 | [acl] | Cotulla: thats how i got it too. |
| 17:17.13 | Cotulla | not from RhodiumW |
| 17:17.20 | [acl] | Cotulla: rhodiumW is a diff animal |
| 17:17.26 | [acl] | no traces of vregs on disptools |
| 17:17.52 | [acl] | just uses gpio 0x63 0x62 and sets em to 1 or 0 |
| 17:17.56 | [acl] | but thats not enough to power up |
| 17:18.00 | [acl] | so something is missing |
| 17:18.17 | Cotulla | are u talking about RHOW now? |
| 17:18.21 | [acl] | yeah |
| 17:18.26 | Cotulla | send me disptools |
| 17:18.27 | [acl] | just saying how its just complately diff |
| 17:18.31 | Cotulla | and I will open the truth for u :P |
| 17:18.33 | [acl] | i dont have it on me. maybe later |
| 17:18.37 | Cotulla | ok |
| 17:18.46 | Cotulla | it's different devices |
| 17:18.47 | Cotulla | :P |
| 17:18.54 | [acl] | yup |
| 17:18.55 | emwe | [acl]: RHODW panel won't come up on nand, do i get that right? |
| 17:19.11 | [acl] | emwe: well it does because mddi is powered on bootloader |
| 17:19.29 | [acl] | so we just power down the pannel via mddi reg instead of killing vreg |
| 17:19.43 | emwe | and vreg stays on? |
| 17:19.45 | [acl] | but its more stable than gsm, so it never botherd us |
| 17:19.53 | [acl] | yeah vreg must stay on since i cant find what it is |
| 17:19.57 | emwe | k |
| 17:19.59 | [acl] | ill send cotulla the disptools to help |
| 17:20.16 | emwe | i only got the topa 2.53S2 around. won't help likely |
| 17:20.26 | [acl] | yeah wont help |
| 17:20.37 | emwe | i even found a TIAGC.csv for tpa2016d2 speaker amplifier in my topa rom dump |
| 17:20.44 | emwe | perhaps it also has that chip ... |
| 17:21.03 | Cotulla | I have 2.53 tpz too |
| 17:21.10 | Cotulla | no TPZ doesn't have it seems |
| 17:21.21 | emwe | then htc just shipped the csv for no good reason. |
| 17:21.29 | Cotulla | just copy & paster |
| 17:21.30 | Cotulla | :) |
| 17:23.02 | Cotulla | it maybe good reason to disable copy & paste |
| 17:23.11 | Cotulla | to prevent copy and paste errors |
| 17:23.12 | Cotulla | :) |
| 17:28.25 | [acl] | Cotulla: so what else is new? still drinking bad milk ? :-p |
| 17:28.26 | [acl] | ol |
| 17:28.59 | Cotulla | found one issue in MAGLDR . . . fixing it |
| 17:29.36 | *** join/#htc-linux helicopter88 (~helicopte@188.11.59.253) |
| 17:30.22 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 17:31.04 | [acl] | prob an issue with vreg |
| 17:31.05 | [acl] | :-p |
| 17:31.24 | Cotulla | it's on Samsung Focus . . . |
| 17:31.39 | Cotulla | issue - imprecise data abort |
| 17:34.42 | [acl] | damn magldr on sammy ? |
| 17:34.45 | [acl] | crazy |
| 17:35.17 | Cotulla | yes |
| 17:35.20 | jonpry | thats the worst kind of data abort |
| 17:35.30 | Cotulla | right, boat owner X_x |
| 17:35.43 | jonpry | not anymore |
| 17:35.48 | Cotulla | it's @^(*%$%6%267442345^@%@%$@$%^%@ &@& ^&@^ * @*$&@*$& !!! $@(*$(* (( @($@$@$ (*@($@)(((((((((((( |
| 17:36.01 | Cotulla | what happened? |
| 17:36.11 | Cotulla | Jack Sparrow captured it? |
| 17:36.13 | jonpry | whoa magldr is in scheme? |
| 17:36.28 | jonpry | no i am moving back to dry land |
| 17:36.29 | [acl] | jonpry: how goes your 3d adventures ? |
| 17:36.56 | Cotulla | sorry jonpry ur 3d in another castle? |
| 17:37.04 | jonpry | i fixed the rendering bugs so it looks pretty good now |
| 17:37.07 | Cotulla | oh |
| 17:37.10 | [acl] | sexy |
| 17:37.13 | Cotulla | so where was a problem? |
| 17:37.32 | jonpry | need to make it faster. i more or less have a scheme for doing high speed texture updates |
| 17:37.41 | jonpry | but there is one really fugly part |
| 17:38.00 | [acl] | lol |
| 17:38.38 | jonpry | all gralloc's have to take place from the surfaceflinger drawing thread |
| 17:38.48 | jonpry | so need to make some queues and stuff like that |
| 17:39.05 | [acl] | jebus |
| 17:39.10 | jonpry | then things will be able to gralloc at the system framerate |
| 17:40.15 | jonpry | oh rendering problem was the bad blob |
| 17:40.47 | [acl] | bad blob? |
| 17:40.55 | [acl] | your binary was effed up? |
| 17:41.15 | jonpry | yeah the 1.1 blob was no good, but i patched it up for ya |
| 17:41.33 | [acl] | hmm interesting. i patched my own and i dont think i released it to anyone |
| 17:41.40 | [acl] | what was wrong with it |
| 17:41.52 | jonpry | frx7.1 has some kind of gles 1.1 binary |
| 17:42.04 | [acl] | mine came from omgb so i patched that one up |
| 17:42.13 | jonpry | it was allocating textures in the middle of the framebuffer |
| 17:42.20 | [acl] | ahh |
| 17:42.22 | [acl] | memory |
| 17:42.34 | jonpry | but now we haz working necore in gingerbread |
| 17:42.40 | [acl] | makes sense |
| 17:42.55 | [acl] | what are we pumping on neo right now ? |
| 17:43.04 | jonpry | 20.1? |
| 17:43.07 | [acl] | hmm |
| 17:43.18 | [acl] | im tempted to try the alex panel hack |
| 17:43.23 | [acl] | and mdpi this bitch |
| 17:43.32 | [acl] | he was around 27/28 with mdpi |
| 17:43.34 | jonpry | WisTilt2 has overclocked the ram to over 200mhz |
| 17:43.50 | [acl] | lol |
| 17:43.56 | jonpry | 28's or so |
| 17:44.15 | WisTilt2 | and had meltdown:) above 200 is no good unless you keep the device nice and cool |
| 17:44.24 | [acl] | i can imagine |
| 17:45.16 | [acl] | the advantage of halving our res is that we dont need to OC |
| 17:45.37 | [acl] | and if we did, well then you max out at 30 probabbly |
| 17:46.28 | jonpry | that would really suck for compositor |
| 17:46.43 | [acl] | 30 woudl suck? |
| 17:46.49 | jonpry | mdpi |
| 17:46.54 | [acl] | why? |
| 17:47.05 | [acl] | we can use the original blob |
| 17:47.09 | jonpry | throwing away half the screen |
| 17:47.26 | jonpry | games is one thing. but all apps at half res. ugh |
| 17:48.02 | [acl] | well how would the compositor even know |
| 17:48.32 | [acl] | the change itself would be on the panel |
| 17:48.39 | [acl] | so we would add it to the fb as mdpi |
| 17:48.54 | [acl] | alex can answe this i guess. he is doing it now |
| 17:49.00 | jonpry | it wouldn't know. it would just look like crap |
| 17:49.22 | arrrghhh | [acl], but KOVS is MDPI is it not? |
| 17:49.31 | arrrghhh | qvga or whatever |
| 17:49.53 | emwe | wvga |
| 17:50.04 | emwe | on a 3" or so screen |
| 17:50.05 | arrrghhh | emwe, i thought that was rhod's screen res |
| 17:50.07 | emwe | even smaller then topa |
| 17:50.14 | arrrghhh | oh poop |
| 17:50.15 | arrrghhh | you're right |
| 17:50.17 | *** join/#htc-linux Alex[sp3dev] (~alexander@178.176.159.104) |
| 17:50.20 | arrrghhh | it is 480x800 |
| 17:50.20 | emwe | there he is |
| 17:50.22 | arrrghhh | speak of the devil |
| 17:50.25 | Alex[sp3dev] | rumours of me using mdpi have been greatly exaggerated! |
| 17:50.29 | emwe | lol |
| 17:50.30 | arrrghhh | lmao |
| 17:50.39 | emwe | i knew he is a log stalker as well arrrghhh :) |
| 17:51.07 | Cotulla | lol alex |
| 17:51.14 | Alex[sp3dev] | WisTilt2: could you share your overclock diff? |
| 17:52.03 | [acl] | Alex[sp3dev]: my good man |
| 17:52.12 | [acl] | Alex[sp3dev]: so whats your pixle double poop |
| 17:52.33 | WisTilt2 | Alex[sp3dev]: sure, when i get it all integrated in our current clock code. right now im using our own portion of clocks that we use on our own device. |
| 17:52.36 | [acl] | arrrghhh: haha.. yes Alex is the devil |
| 17:52.37 | Alex[sp3dev] | [acl]: i'm not using it, because it looks even worse than a native qvga screen |
| 17:53.03 | [acl] | Alex[sp3dev]: fuck but your screenshots were almost unnoticeable .. or do i need glasses ? |
| 17:53.03 | [acl] | :-( |
| 17:53.18 | *** part/#htc-linux Alex[sp3dev] (~alexander@178.176.159.104) |
| 17:53.19 | *** join/#htc-linux Alex[sp3dev] (~alexander@178.176.159.104) |
| 17:53.21 | Blista | exit |
| 17:53.24 | Alex[sp3dev] | [acl]: well, for 3d, maybe |
| 17:53.41 | [acl] | im still interested in trying |
| 17:53.42 | [acl] | lol |
| 17:53.48 | Alex[sp3dev] | but for ui and fonts.. horrible. even more horrible than my sgs ;) |
| 17:53.52 | Blista | is termo-dyslexic again |
| 17:53.56 | WisTilt2 | [acl]: will changing the panel refresh to 70hz do us any good? thats as fast at these panels will go. |
| 17:54.21 | [acl] | WisTilt2: means our theoretical max will go from 30 to 35 |
| 17:54.31 | [acl] | so not bad |
| 17:54.32 | [acl] | lol |
| 17:54.37 | WisTilt2 | yeah sounds like it. these only do 50hz - 70hz |
| 17:54.47 | Alex[sp3dev] | damn i've deleted my cm7 tree to free up some space to try cm9 on iconia... is cm9 usable with software rendering on msm7k? |
| 17:54.56 | Cotulla | formats Blista's brain again and installed DOS instead behh |
| 17:55.02 | [acl] | Alex[sp3dev]: yeah.. but its FUCKING SLOW |
| 17:55.20 | [acl] | im tracking the evervolv team who is just wronging cm9 for hero and heroc |
| 17:55.33 | rpierce99 | oh good glad you're on an iconia Alex[sp3dev], just bought one on sunday, still waiting for it to get here, but was hoping there was someone doing dev work on it |
| 17:56.00 | Alex[sp3dev] | rpierce99: i've shoved ubuntu and chromeos 2.6.38 kernel there back in july |
| 17:57.50 | rpierce99 | what do you run day to day on it |
| 17:58.11 | Alex[sp3dev] | [acl]: hum.. don't feel like checking out cm7 again.. we'll see how slow this cm9 thingie is |
| 17:58.40 | [acl] | Alex[sp3dev]: i did one last sync myself. Cm7 itself is so slow i just lost all faith |
| 17:59.04 | jonpry | why is cm7 slower than xdandroid? |
| 17:59.08 | Alex[sp3dev] | [acl]: just throw away cm7 adw |
| 17:59.28 | Alex[sp3dev] | jonpry: cause they're using a special version of adw that's like 10 times slower than a paid adw |
| 17:59.41 | jonpry | hmm |
| 18:00.19 | [acl] | Alex[sp3dev]: im happy with omgb. fuck cm bro..lol just not for me |
| 18:00.28 | jonpry | i have cm9 setup for armv6j jit and what not |
| 18:01.01 | Alex[sp3dev] | rpierce99: i'm mostly running android because ubuntu is not really finger-friendly.. maybe i should look into it |
| 18:01.26 | Alex[sp3dev] | jonpry: tried war3z adw launcher ex? or maybe launcherpro? |
| 18:01.59 | jonpry | no not yet. i'm hoping hw composition will make it fly regardless |
| 18:04.16 | [acl] | jonpry: you never let me down.. so i dont think you will begin.. i have faith on your composition project |
| 18:04.24 | [acl] | ur still stab worthy ..lol |
| 18:04.48 | [acl] | i know bzo gets jealous he is only punch worthy.. but hey.. you know the rules |
| 18:04.56 | jonpry | lol |
| 18:05.28 | [acl] | Alex[sp3dev]: bro.. ever dove into that jpeg poop for camera ? |
| 18:05.59 | jonpry | i can't get it done pretty easily. but i am not sure other 3d apps will ever work right with it |
| 18:06.07 | Alex[sp3dev] | [acl]: not yet.. so you have poop on 27 and your drivers/media is the same as our main tree? |
| 18:07.09 | [acl] | i think so |
| 18:07.18 | [acl] | gsm is consuming all my time recently |
| 18:07.44 | [acl] | Alex[sp3dev]; but im content with the party party stop gap, but idealy the cm jpg is the way to go. |
| 18:07.47 | Alex[sp3dev] | and btw.. who da fuck made ril default to cdma when htc_hw is not found? |
| 18:08.10 | [acl] | Alex[sp3dev]: lol. i have a modded ril so i dunno about the stock one |
| 18:08.19 | [acl] | I had to change some stuff but it works fine so far |
| 18:09.40 | *** join/#htc-linux balans2 (~user@82-170-217-205.ip.telfort.nl) |
| 18:11.01 | [acl] | Alex[sp3dev]: no other build has perms like xdandroid, so had to butcher the way things are done. took ideas from how samsung does this stuff |
| 18:11.23 | Alex[sp3dev] | [acl]: which kind of perms? i've just set everything to like 666 |
| 18:11.40 | [acl] | Alex[sp3dev]: no like ril starting up ppp |
| 18:11.45 | [acl] | and doing cdma. setprops |
| 18:12.13 | Alex[sp3dev] | ah. i just copied your stuff but 'refactored' ril a bit and named the property xda_pppd instead of cdma_pppd |
| 18:12.16 | [acl] | i highly doubt cm will bend over for my build, so had to change ril |
| 18:12.26 | [acl] | i had to rename it again |
| 18:12.27 | [acl] | for gms |
| 18:12.29 | [acl] | *gsm |
| 18:12.40 | [acl] | now its called ppp_runner which is a wrapper for ppp |
| 18:12.41 | [acl] | lol |
| 18:12.56 | [acl] | i swer those gsm fucks better be greatful |
| 18:13.06 | Alex[sp3dev] | that's starting to be javayly (if that is a word) |
| 18:13.41 | [acl] | Alex[sp3dev]: ive yet to successfully power down and up the panel on gsm. We have the vreg and the lcd reset gpio. But the panel does not come back up |
| 18:13.52 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-75.dynamic.mnet-online.de) |
| 18:13.55 | [acl] | i know you have this working flawlessly right ? |
| 18:13.57 | [acl] | any advice ? |
| 18:14.17 | [acl] | vreg itself works, but once the reset gpio is triggered it goes down and not coming back up |
| 18:14.27 | Alex[sp3dev] | [acl]: panel was the first thing i did on the kovsky project.. so i just did like wince disptools does |
| 18:14.54 | [acl] | yeah same here, so i wonder if its my init. gsm disptools is diff than cdma |
| 18:14.56 | Alex[sp3dev] | well, after the reset you have to reinit mddi.. and timings are critical |
| 18:15.02 | [acl] | so my original panel regs may be wrong |
| 18:15.48 | [acl] | i guess something that i can fix with another all nighter |
| 18:16.32 | Alex[sp3dev] | [acl]: does alarm clock always work in your builds? |
| 18:16.45 | [acl] | depends on the radio |
| 18:17.01 | [acl] | arrgg uses it religiously apparently but on older radios it kinda poops a bit |
| 18:17.04 | [acl] | so does gps |
| 18:17.15 | [acl] | arrrghhh: yoo. how alarm go for you? |
| 18:17.54 | arrrghhh | alarm? |
| 18:18.11 | [acl] | yeah.. |
| 18:19.12 | [acl] | cuz there was this one dood who said it works, but then the panel would nto come up. and all i saw on his logs were radio errors. |
| 18:19.41 | Alex[sp3dev] | actually it's mostly alarm ioctls that fail. but again, on my sgs they fail too but it always works |
| 18:19.57 | [acl] | i think the biggest pain in the ass right now |
| 18:20.00 | [acl] | is the ringer |
| 18:20.09 | [acl] | when the phone is asleep |
| 18:20.22 | [acl] | and i make a call to it, its like a full 2 or 3 seconds the phone wakes up |
| 18:20.39 | [acl] | log wise it wakes up pretty fast, but by the time the damn phone app fires up its just way too late |
| 18:21.43 | arrrghhh | the phone app is a complete bag of ass |
| 18:21.48 | arrrghhh | makes me rage |
| 18:22.01 | Alex[sp3dev] | android is a complete bag of dicks |
| 18:22.17 | arrrghhh | lol |
| 18:22.50 | Cotulla | dicks? not cunts? |
| 18:23.04 | Cotulla | :D |
| 18:34.26 | *** join/#htc-linux helicopter88 (~helicopte@188.11.59.253) |
| 18:46.25 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-75.dynamic.mnet-online.de) |
| 18:47.52 | *** join/#htc-linux gauner1986 (~Miranda@tmo-102-87.customers.d1-online.com) |
| 18:49.10 | *** join/#htc-linux newbie1 (~helicopte@host121-199-dynamic.181-80-r.retail.telecomitalia.it) |
| 18:50.11 | *** part/#htc-linux Alex[sp3dev] (~alexander@178.176.159.104) |
| 18:58.37 | *** join/#htc-linux gauner1986 (~Miranda@tmo-103-108.customers.d1-online.com) |
| 19:01.29 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 19:41.19 | *** join/#htc-linux avinashhm (~avinash-h@192.94.92.14) |
| 19:48.53 | WisTilt2 | [acl]: i changed vsync on panel to 70hz and something else must be locking it to 30fps. hits 30.1fps now and then but same as with 60hz. |
| 19:49.29 | [acl] | WisTilt2: that's the only limit that im aware of |
| 19:50.26 | WisTilt2 | maybe 30fps is all these things can do. doesnt go any higher even with gpu oc'd |
| 19:51.13 | [acl] | question here is if we can verify the vsync is actually going at 70 |
| 19:51.30 | [acl] | you may need to mod up a kernel and enable some time debug prints. |
| 19:51.34 | [acl] | not sure how else to verify |
| 19:52.06 | WisTilt2 | it is, at least i have the panel configured at that rate. panning stuff looks less blurry but that could be a placebo effect |
| 19:53.13 | [acl] | how about lowering it to 50. In realitythat should lower our fps |
| 19:53.20 | WisTilt2 | i slowed it down to 50hz and it is quite noticeable even on switching desktops |
| 19:53.40 | WisTilt2 | it did slow it down in neocore but only by 4fps |
| 19:53.55 | [acl] | well take 3d out of the equation |
| 19:53.58 | detule | can't you count interrupts |
| 19:54.01 | [acl] | concentrate on 2d |
| 19:54.20 | WisTilt2 | didnt even try 2d so ill give that a go |
| 19:54.21 | [acl] | 2d will hit the limit easy |
| 19:54.29 | [acl] | we do now at 30 |
| 19:54.32 | [acl] | no OC needed |
| 19:54.38 | [acl] | breaking that is the goal |
| 19:54.52 | detule | powertop ftw |
| 19:55.19 | [acl] | detule: you can count interrupts or just change the code around to report fps based on vsync |
| 19:55.23 | [acl] | depends how much time you have |
| 19:55.27 | [acl] | and if you have a full time job |
| 19:55.28 | [acl] | :-p |
| 19:55.47 | [acl] | i think the msm_fb has some of this in there you can enable |
| 19:55.59 | detule | just need a debian chroot, you can use powertop it will count all interrupts for you |
| 19:56.22 | [acl] | but how will you know when to start and end |
| 19:56.23 | [acl] | ? |
| 19:56.27 | [acl] | vsync is always on |
| 19:56.33 | detule | it gives you per second numbers |
| 19:56.37 | [acl] | ahh |
| 19:56.42 | [acl] | a rate you mean |
| 19:56.45 | detule | as in the frequency |
| 19:56.54 | [acl] | sexy |
| 19:57.13 | [acl] | i forgot the app we used before to test for 30 |
| 19:57.26 | detule | fps2d? |
| 19:57.33 | detule | that guy hits 29.5 or something |
| 19:57.33 | [acl] | probably |
| 19:57.40 | [acl] | we hit 30 now |
| 19:57.45 | [acl] | thats how we know its the limit |
| 19:57.46 | [acl] | lol |
| 19:59.18 | jonpry | rhod can do 90 no prob |
| 19:59.39 | jonpry | little little liquid n2, vcore at like 5volts |
| 19:59.58 | [acl] | lol |
| 20:00.18 | [acl] | you are close.. i think someone hit 84 before with panel off meaning no vsync |
| 20:01.58 | jonpry | i dunno if wistilt2 has started turning up the juice for these OC experiments yet |
| 20:02.09 | jonpry | gotta be the next step |
| 20:07.21 | WisTilt2 | jonpry: so these things can do 90fps in 2d? |
| 20:07.46 | jonpry | with the right clocking and cooling |
| 20:08.12 | WisTilt2 | and yes i am pouring the juice to the gpu now but 30fps is where it is stuck |
| 20:08.32 | WisTilt2 | gets a lot warmer so might be hitting it a bit too much |
| 20:08.46 | jonpry | you upped the regulator voltage? |
| 20:08.59 | WisTilt2 | no only clock |
| 20:09.23 | jonpry | lpddr should be run at 2v |
| 20:09.34 | WisTilt2 | what is its default do you know? |
| 20:09.38 | jonpry | 1.8 |
| 20:11.17 | WisTilt2 | hmm, that will just make it hotter wont it? its clocking higher now, just cant get past 30fps. if i slow it down i can see it drop to 29,28 etc, and going up another 20% from 29fps only gets it to 30fps |
| 20:12.05 | jonpry | voltage==speed |
| 20:12.29 | WisTilt2 | ill try 2v and see if it starts smoking:) |
| 20:12.39 | jonpry | i ran a piece of it at almost 3v for a while |
| 20:12.51 | jonpry | blew up the processor, but memory was fine |
| 20:13.13 | [acl] | lol |
| 20:14.01 | jonpry | this is really only useful if you want to get 230mhz to work right |
| 20:21.37 | jonpry | there are some comments in surfaceflinger that talk about how if you can't render in 1/vsync time the framerate will be halved. but this doesn't make much sense to me |
| 20:22.41 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 20:23.37 | jonpry | if thats true for whatever reason, shouldn't that make you get more or less stuck at factors of vsync? |
| 20:24.13 | jonpry | er 10,12,15,20,30 ? |
| 20:28.24 | [acl] | jonpry; yeah |
| 20:28.27 | [acl] | vsync is a whore |
| 20:28.48 | [acl] | i dont know if we have the ability to not wait for vsync |
| 20:30.18 | detule | wait but we see a range of fps, not just those notches |
| 20:33.38 | jonpry | yeah like that |
| 20:34.20 | rpierce99 | but those are averages, no? if it bounces between 20 and 30, but stays more on the 20 than the 30, you could get 20.1 |
| 20:34.21 | jonpry | i don't see where its waiting for vsync. presumably we can do something a little more bold because of this strange tripple buffering thing that is going on |
| 20:35.25 | jonpry | rpierce99, thats true. but i think the distribution would make it very difficult to get say 25. most things will be very near the bin |
| 20:38.26 | WisTilt2 | detule: i cleaned up the 3.0 autobuild so we're building clean now |
| 20:40.10 | WisTilt2 | i need to grab lunch and head off to a meeting so catch you tonight guys. arrrghhh let me know how that slowdown test kernel works so i know i have the right register for cdma. |
| 20:40.26 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-20-63-62.client.mchsi.com) |
| 20:52.10 | *** join/#htc-linux lardman|work (~lardman@138-38-179-9.docking.bath.ac.uk) |
| 21:09.01 | arrrghhh | crap. |
| 21:10.23 | *** join/#htc-linux LordDeath (~LordDeath@xdsl-87-78-106-12.netcologne.de) |
| 21:12.52 | *** join/#htc-linux swc|666 (~gecko@unaffiliated/swc666/x-4934821) |
| 21:26.24 | arrrghhh | jonpry, you thar? |
| 21:28.19 | jonpry | yo arrrghhh |
| 21:28.40 | arrrghhh | do you know what wistilt2 wanted out of that test kernel he is having me try? |
| 21:28.50 | arrrghhh | he said something about it being really slow, 10fps in neocore or smth. |
| 21:28.52 | [acl] | Cotulla: yooo |
| 21:28.56 | [acl] | Cotulla: still here ? |
| 21:29.01 | [acl] | Cotulla: http://dl.dropbox.com/u/12183048/htctopaz/re/disptools.rhod.sprintmr1.dll |
| 21:29.04 | [acl] | tell me the truth !!! |
| 21:29.05 | jonpry | arrrghhh, yeah wanted to know if its slow on your cdma |
| 21:29.07 | arrrghhh | but it's not. i put in your egl and GLES libs, and it's faster... i'm getting 20-22fps. textures are SOL |
| 21:29.23 | arrrghhh | jonpry, it's certainly not slow. but textures are missing still. |
| 21:29.42 | jonpry | hard to tell speed when it isn't fully rendering though |
| 21:29.57 | jonpry | should be close to 30 with no textures i think |
| 21:30.14 | [acl] | effin qcom cheats |
| 21:30.19 | [acl] | i think they use compressed textures |
| 21:30.36 | Cotulla | hey [acl] |
| 21:30.36 | jonpry | who doesn't |
| 21:30.38 | Cotulla | u fucking fast |
| 21:30.49 | [acl] | jonpry: android itself since they cant compress on the fly |
| 21:30.55 | [acl] | so all android textures are raw |
| 21:31.16 | jonpry | but we don't have hw composition yet |
| 21:31.26 | [acl] | gl wise it makes a difference |
| 21:31.42 | jonpry | need moar gpu1 |
| 21:31.53 | [acl] | Cotulla: dll time |
| 21:32.02 | Cotulla | yes there no vregs at all |
| 21:32.03 | Cotulla | for mddi |
| 21:32.08 | Cotulla | only gpio |
| 21:32.10 | Cotulla | they |
| 21:32.16 | *** join/#htc-linux avinashhm (~avinash-h@192.94.92.14) |
| 21:32.21 | Cotulla | config 98 |
| 21:32.25 | Cotulla | config 99 |
| 21:32.28 | Cotulla | sleep 20 |
| 21:32.34 | [acl] | yeah we have this |
| 21:32.34 | Cotulla | set 81 |
| 21:32.39 | Cotulla | sleep 10 |
| 21:32.40 | [acl] | vreg !!! |
| 21:32.42 | [acl] | we want vregggg |
| 21:32.43 | Cotulla | *82 |
| 21:32.56 | Cotulla | set clear set |
| 21:32.59 | Cotulla | 82 |
| 21:33.31 | Cotulla | there no vregs 100% inside disptools |
| 21:34.49 | [acl] | damnit |
| 21:34.51 | [acl] | where could it be |
| 21:34.59 | Cotulla | u sure u have right code? |
| 21:34.59 | Cotulla | show |
| 21:35.04 | [acl] | disptools |
| 21:35.06 | [acl] | what else |
| 21:35.14 | [acl] | kernel has power down only, no power up |
| 21:35.19 | [acl] | same code too |
| 21:35.59 | [acl] | theory is that power is being done via some iclt somewhere else. |
| 21:36.00 | Cotulla | but maybe problem in details |
| 21:36.44 | Cotulla | btw do u solve issue with button in LK? |
| 21:37.15 | *** join/#htc-linux TheXev (~user@pool-108-11-141-16.eriepa.dsl-w.verizon.net) |
| 21:37.26 | [acl] | Cotulla: nahh, people were happy they press less buttons |
| 21:37.26 | [acl] | lol |
| 21:37.32 | [acl] | so i didnt bother. |
| 21:37.37 | [acl] | but i should try |
| 21:38.14 | [acl] | besides this is just gsm issue. cdma is happy :-) |
| 21:38.43 | [acl] | Cotulla: another version of the file. Not sure if it will help. prob same shit |
| 21:38.43 | [acl] | http://dl.dropbox.com/u/12183048/htctopaz/re/disptools.rhod.2.07S2_ger.dll |
| 21:40.07 | Cotulla | show ur linux code? |
| 21:40.41 | Cotulla | this is with VREGS and it's from GSM? |
| 21:40.55 | Cotulla | 800 & 2000 |
| 21:41.17 | [acl] | oops nevermind then |
| 21:41.22 | [acl] | first one is cdma .. |
| 21:41.34 | [acl] | Cotulla: http://gitorious.org/~acl/linux-on-qualcomm-s-msm/linux-msm-rhod-nand/blobs/70f67aaf0402580831518d424e14a4f08f7dadb9/arch/arm/mach-msm/board-htcrhodium-panel.c#line417 |
| 21:43.26 | Cotulla | 98 99 |
| 21:43.28 | Cotulla | why there 1? |
| 21:43.33 | Cotulla | is 1 means that it's alternate 1? |
| 21:44.47 | [acl] | ignore 1. means its a func |
| 21:45.04 | Cotulla | func? |
| 21:45.05 | [acl] | i think its func, direction, pull, etc etc |
| 21:45.19 | Cotulla | yes, but function is must be 0? |
| 21:45.35 | Cotulla | otherwise it some specific function, not gpio output |
| 21:45.38 | Cotulla | check it |
| 21:46.04 | [acl] | hmm |
| 21:46.08 | Cotulla | http://gitorious.org/~acl/linux-on-qualcomm-s-msm/linux-msm-rhod-nand/blobs/70f67aaf0402580831518d424e14a4f08f7dadb9/arch/arm/mach-msm/board-htcrhodium-proximity.c |
| 21:46.09 | Cotulla | look here |
| 21:46.15 | Cotulla | DEX_GPIO_CFG(PROXIMITY_GPIO, |
| 21:46.15 | Cotulla | 38 0, |
| 21:46.17 | Cotulla | here 0 |
| 21:46.53 | Cotulla | and inside config_camera_on_gpios() also 0 |
| 21:46.59 | [acl] | ahh shit |
| 21:47.00 | Cotulla | u sure it must be function #1 there? |
| 21:47.07 | [acl] | you are right i think .. |
| 21:47.10 | Cotulla | I think it's just power gpio |
| 21:47.12 | [acl] | copy and paste casualty |
| 21:47.12 | Cotulla | so try ^^ |
| 21:48.01 | [acl] | i like how you use my own code to prove me wrong.. |
| 21:48.02 | [acl] | lol |
| 21:48.45 | Cotulla | why not |
| 21:48.50 | [acl] | its the best way |
| 21:48.53 | [acl] | but you are right |
| 21:49.00 | Cotulla | try it and we know truth |
| 21:49.00 | [acl] | and the reason why i may have made this mistake |
| 21:49.08 | [acl] | is because that was a recent addtion |
| 21:49.15 | Cotulla | if policy of truth won't capture us before |
| 21:49.17 | [acl] | note i commented out the original wherere i just set the gpio |
| 21:49.25 | [acl] | instead do the whole long function |
| 21:49.51 | [acl] | originally it was just gpio_set_value(0x63,1); for on |
| 21:49.55 | Cotulla | http://www.youtube.com/watch?v=4ty812aSdLo |
| 21:49.55 | [acl] | 0 of off |
| 21:50.26 | [acl] | it was blocked in my country :-( |
| 21:50.49 | Cotulla | http://www.youtube.com/watch?v=3q8bXxPPKno |
| 21:50.51 | Cotulla | ? |
| 21:52.43 | [acl] | now i just need speakers |
| 21:52.44 | [acl] | :-( |
| 21:52.53 | Cotulla | lol |
| 21:52.55 | Cotulla | epic |
| 21:53.31 | [acl] | this is odd |
| 21:53.39 | [acl] | on my new prox code, this msm_gpio_set_function isnt even needed |
| 21:53.50 | [acl] | or is it.. let me check |
| 22:00.26 | *** join/#htc-linux mes (~mes@S0106000ce55186df.cc.shawcable.net) |
| 22:03.57 | *** join/#htc-linux vinceweis (4463ed13@gateway/web/freenode/ip.68.99.237.19) |
| 22:14.21 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 22:17.44 | Cotulla | fixed ACL? |
| 22:19.59 | [acl] | i dont think so. ill tell you tomorrow for sure |
| 22:20.11 | [acl] | my new prox code doesnt use the set function |
| 22:20.16 | [acl] | but it works |
| 22:20.50 | Cotulla | ? |
| 22:20.52 | Cotulla | what about camera? |
| 22:20.55 | Cotulla | there 0 |
| 22:21.03 | [acl] | yeah |
| 22:21.08 | [acl] | some testing tonight will show |
| 22:21.09 | [acl] | :-) |
| 22:21.14 | Cotulla | okay |
| 22:22.39 | [acl] | anyways i gotta get ready to go.. ill ttyl |
| 22:22.40 | [acl] | thanks |
| 22:33.31 | *** join/#htc-linux bukington (~bukington@fac34-2-82-228-151-145.fbx.proxad.net) |
| 22:36.40 | *** join/#htc-linux Echo31 (~olivier@lan31-9-88-177-158-48.fbx.proxad.net) |
| 22:39.58 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:dc31:1d3d:2ec3:442c) |
| 22:41.13 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:dc31:1d3d:2ec3:442c) |
| 22:41.14 | *** join/#htc-linux mastermerlin (~Adium@pD9E2EA77.dip.t-dialin.net) |
| 22:59.39 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 23:11.42 | *** part/#htc-linux Cotulla (~myfakemai@nat100-255-205-109.tvoe.tv) |
| 23:13.59 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-orwedahkpmfljbwf) |
| 23:17.46 | *** join/#htc-linux Rajko (~rajkosto@2001:470:d76b:da7a:dc31:1d3d:2ec3:442c) |
| 23:44.18 | *** join/#htc-linux lardman|home (~lardman@138-38-179-9.docking.bath.ac.uk) |
| 23:46.07 | *** join/#htc-linux rzk (~rzk@95-24-54-101.broadband.corbina.ru) |
| 23:58.45 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-qxkeptsmidcknlmd) |