| 00:14.59 | *** join/#htc-linux Detule (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 00:28.46 | *** join/#htc-linux mastermerlin (~Adium@p4FEE5B36.dip.t-dialin.net) |
| 00:37.16 | *** join/#htc-linux fakker (~noobhands@cpc13-hitc6-2-0-cust129.9-2.cable.virginmedia.com) |
| 00:41.26 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 00:48.24 | Detule | trying to compile against bionic is like trying to pick your nose with gloves on.... |
| 01:03.41 | *** join/#htc-linux ORi| (~ORi@91.181.183.241) |
| 01:38.30 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
| 01:38.30 | *** join/#htc-linux hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) |
| 01:38.52 | *** join/#htc-linux mastermerlin (~Adium@p4FEE4B64.dip.t-dialin.net) |
| 01:49.04 | *** join/#htc-linux programmer8922 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 01:55.13 | jonpry | WisTilt2, ping |
| 01:58.53 | WisTilt2 | jonpry: pong. whole family was over all day swimming, barbecuing, etc. just about to relax and attempt some of this acoustic porting. |
| 01:59.33 | jonpry | sounds fun. i spent the day out on my home made boat. got an engine now |
| 01:59.48 | WisTilt2 | home made? what kind |
| 02:00.30 | jonpry | its just a little RIB dinghy |
| 02:01.04 | jonpry | i found the remains on one floating in the water. ie the inflatable part and built a hull for it |
| 02:01.33 | WisTilt2 | hey those can be lots of fun too. we had a fiberglass bottom dinghy with a 15hp motor and had a blast with the kids in the lagoon teaching them to drive it. they were 3 and 5 at the time so was interesting. |
| 02:02.00 | WisTilt2 | at least you salvaged it to something usable |
| 02:02.42 | jonpry | i've only got a 6, only 8 feet long though |
| 02:03.12 | jonpry | just fixed bluetooth |
| 02:03.17 | WisTilt2 | handy to have until you get your sailboat |
| 02:03.55 | WisTilt2 | are you using jb's bt code or did you do it from scratch? |
| 02:04.03 | jonpry | jb's |
| 02:05.18 | WisTilt2 | on this acoustic, are we wanting to port it over with the same "new" method alex and jb are using? looks like userland libs will have to be changed to support that, which i guess they or someone has already done? |
| 02:05.43 | jonpry | this stuff is all wacky. looks not done |
| 02:05.57 | jonpry | there were commits today |
| 02:06.16 | WisTilt2 | bt commits or what? |
| 02:06.24 | jonpry | acoustic |
| 02:06.44 | rpierce99 | all the userland stuff to make the acoustic libs go is here: http://forum.xda-developers.com/showthread.php?t=1076884 |
| 02:06.50 | jonpry | your looking at: https://gitorious.org/~jbruneaux/linux-on-qualcomm-s-msm/linux-msm-home-work/commits/htc-msm-2.6.27-libacoustic |
| 02:07.29 | WisTilt2 | frx06 doesnt support it so i assume ginger does so we're moving to that standard or what? i dont want to waste a lot of time doing it one way then have to change it all again. |
| 02:07.41 | jonpry | i'm guessing we will have to switch to hyc build to start using this stuff. seems to be the gold standard |
| 02:08.22 | jonpry | yeah i am not a big fan of not done code |
| 02:08.25 | hyc | I think JB may have updated those libs recently, and I haven't rebuilt them in a while |
| 02:08.52 | WisTilt2 | rpierce99, so those libs can just be stuck into frx06 and we're good on that side? |
| 02:08.56 | hyc | stinebd says he's merging all of it into FRX07 |
| 02:09.09 | jonpry | so its acoustic or nothing? |
| 02:09.10 | rpierce99 | WisTilt2: yep that's what those instructions are for, testing of FRX06 |
| 02:09.34 | WisTilt2 | hyc, so the new ioctl in acoustic wince will be what stinebd will setup in frx07? |
| 02:09.53 | hyc | I believe so, yes |
| 02:10.22 | jonpry | if i have to download a new system.img it will set us back days |
| 02:10.49 | WisTilt2 | ok i like that then:) the new centrally located stuff is much easier to work with as long as userland talks to it. we can get rid of all this other kludged sound stuff. |
| 02:11.13 | rpierce99 | jonpry: no need, all the stuff you need is at that xda-dev link |
| 02:11.28 | WisTilt2 | how long before the acoustic code is actually standard and finalized though? |
| 02:11.33 | jonpry | WisTilt2, since we are running 27 qdsp5 can we import the whole folder from jb's tree and have minimal work? |
| 02:11.39 | hyc | if you have FRX06 and just need JB's audio libs, yes, you can just download the zip from that link |
| 02:12.24 | WisTilt2 | jonpry, i can easily add all the acoustic stuff to our current method though. thats what i briefly looked at last night and should be easy. then we can conform it to the standard later? |
| 02:14.57 | *** join/#htc-linux tjs_bsd (~tjs@mail.CDPA.cc) |
| 02:15.59 | hyc | keep in mind tha JB is still working on all of this stuff, so at least for this week it's still a moving target |
| 02:18.14 | jonpry | WisTilt2, i have no idea what that means? add it but not add it? |
| 02:21.37 | WisTilt2 | jonpry, im thinking of just adding in acoustic functionality to what we have for now then. that will gain us better quality, speakerphone mic, etc., but without the new userland ioctl until thats closer to ready. that way existing libs will still work until frx07 is out. i'll do it either way though, you decide:) |
| 02:22.41 | jonpry | what will it take to get bluetooth audio routing? |
| 02:23.19 | WisTilt2 | if bt routing is already in acoustic somewhere it will be easy. if not, we can probably add it without too much trouble. |
| 02:23.43 | jonpry | i think its done via the ADIE tables that acoustic is suppose to upload |
| 02:24.00 | jonpry | doesn't exist in out AMSS_PARA garbage |
| 02:25.42 | WisTilt2 | our para file was based on the .csv's though so does that mean the csv's don't contain it yet either? |
| 02:25.56 | *** join/#htc-linux programmer8922 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 02:25.59 | jonpry | we only have part of the csv's |
| 02:26.16 | jonpry | and are generally missing any mechanism to select an entry |
| 02:26.55 | WisTilt2 | i have all the info on those settings so we can add the values. selecting the table entry should be easy to add |
| 02:27.10 | jonpry | i don't think it is. thats the whole point of this |
| 02:27.54 | jonpry | like userland is never inspired to tell the kernel it wants bluetooth audio. so you could maybe write some new userland stuff. but libacoustic is how that problem was originally handled |
| 02:29.20 | WisTilt2 | so currently there is no userland knowledge of bt as far as audio only? i see the bt enable in userland so does it just turn it on then not know what else to do for audio? |
| 02:30.08 | *** join/#htc-linux programmer89221 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 02:31.00 | jonpry | afaik userland does whatever through bluez and then tells acoustic to deal with it. and acoustic isn't working so all is lost |
| 02:31.54 | *** join/#htc-linux Ceesheim (~ceesheim@p5B347992.dip.t-dialin.net) |
| 02:32.43 | *** join/#htc-linux programmer8922 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 02:35.35 | WisTilt2 | i assume when userland bt is turned on we currently get something via ioctl or is that not implemented yet either? or is it setting something in sysfs? |
| 02:36.08 | WisTilt2 | looks like Dallas has a pretty good change of winning the finals here in about 3mins |
| 02:37.00 | jonpry | we don't even create the htc_acoustic device so there is no ioctl atm. no nothing |
| 02:37.51 | jonpry | which is also why a lot of things don't work with audio routing. theres tons of info from userland we just never et |
| 02:38.07 | WisTilt2 | ah, that could be a problem. so we'd still have to manually create /dev/htc_acoustic so we need stinebd to hurry up:) |
| 02:38.41 | WisTilt2 | he needs someone to help him. i dont know how he does all that side by himself |
| 02:39.58 | jonpry | i don't think this extra ioctl necessarily breaks anything |
| 02:40.13 | jonpry | might work with current lib |
| 02:41.42 | WisTilt2 | it just never gets used with current lib so wont conflict at all. |
| 02:41.55 | hyc | Not sure how else to help. I've already demonstrated that all the patches work together, in my private build |
| 02:42.07 | WisTilt2 | dallas has it in the bag. had to root for them since they beat my Lakers:) |
| 02:42.33 | rpierce99 | i just have to root against the heat |
| 02:42.51 | rpierce99 | hate it when teams try to win by buying a team |
| 02:42.56 | WisTilt2 | yep |
| 02:43.25 | WisTilt2 | mavericks were very strong this year, they deserve the championship |
| 02:44.57 | jonpry | i'm not even sure what to work on anymore. nothing is broken except acoustic which isn't even in 27 |
| 02:45.35 | rpierce99 | adb |
| 02:45.46 | rpierce99 | usb storage |
| 02:46.03 | jonpry | we have adb over ethernet |
| 02:46.10 | rpierce99 | i realize |
| 02:46.35 | jonpry | i will see what google is doing about the android composite debocle |
| 02:46.40 | hyc | what's up with regular USB? |
| 02:46.48 | rpierce99 | you asked (ok you didn't ask) for things that don't work as well in 39 as 27 |
| 02:47.51 | jonpry | composite devices were sort of merged into 39. so there are lots of name conflicts with the android composite code and the adb gadget thingy doesn't work with the native composite device |
| 02:48.58 | rpierce99 | is it just a matter of reporting the proper device id and adb on the computer sets up the necessary networking settings? |
| 02:49.59 | jonpry | theres probably a driver necessary on windows |
| 02:50.06 | *** join/#htc-linux tjs_bsd (~tjs@mail.CDPA.cc) |
| 02:50.21 | rpierce99 | it doesn't auto-connect in linux or mac either |
| 02:50.56 | jonpry | maybe gates or jobs will help |
| 02:51.38 | hyc | ordinarily yes, once the phone is reporting the right vendor and device IDs, the host should see everything working |
| 02:52.44 | hyc | for USB ethernet, if you build the kernel with wince-compatible driver, then Windows will see it without any additional driver |
| 02:53.03 | hyc | for USB adb, it of course requires a google driver |
| 02:53.12 | rpierce99 | all i know is when i plug in with .39 i have to set a static ip on usb0 and manually adb connect, with .27 something sets up that connection automatically |
| 02:53.17 | hyc | for USB mass storage, it should work without any extra drivers |
| 02:53.59 | hyc | for .27, USB ethernet is not enabled by default. When you turn on the USB tethering option, then userland issues the appropriate ifconfig commands to get it set up. |
| 02:54.36 | hyc | it also spawns a dhcp server so that your PC can automatically get an IP address |
| 02:55.11 | hyc | if .39 is booting with USB ethernet already enabled, then it's not using the correct default vendor and device IDs |
| 02:56.29 | jonpry | we are running USB EEM because composite can't work. its set to some kind weird vid/pid that was for like the first EEM device made or something |
| 02:58.48 | hyc | I thought google decided to play nice and rework their android-specific drivers so they'd be accepted in mainloine again? |
| 02:58.57 | hyc | mainline* |
| 03:01.36 | jonpry | thats basically the problem. anything that has been mainlined causes serious problems for our 27 code |
| 03:03.29 | jonpry | never fear. i will make it work |
| 03:09.40 | WisTilt2 | do all rhods have the dual mics? |
| 03:17.23 | jonpry | i think so |
| 03:17.42 | AstainHellbring | yes |
| 03:20.31 | *** join/#htc-linux MacDrunk (~marper@201.164.166.190) |
| 03:25.37 | *** join/#htc-linux [acl] (~abel@cpe-69-203-141-229.si.res.rr.com) |
| 03:35.29 | jonpry | hey [acl] |
| 03:36.32 | [acl] | jonpry: sup bud |
| 03:36.48 | [acl] | didnt think anyone was on |
| 03:37.10 | jonpry | i work on phone fulltime |
| 03:38.56 | [acl] | jebus |
| 03:38.58 | jonpry | juast hacking on adb for 39 |
| 03:39.04 | [acl] | i wish i had the luxury |
| 03:39.18 | [acl] | im commiting my stuff u had done a month ago |
| 03:39.21 | [acl] | im that behind |
| 03:41.27 | WisTilt2 | yo [acl]: hey did we put ubuntu10 32bit on the autobuild or 64bit? |
| 03:41.42 | [acl] | dang bro.. i think we did 32.. |
| 03:41.46 | [acl] | cuz its desktop version |
| 03:41.52 | [acl] | my advice is go 64bit server |
| 03:42.54 | WisTilt2 | ok good. i setup the new quad core autobuild and have .39 running. just need to move your stuff over into the other kvm sometime next week. server is 64bit but do you want your os 32bit still? can do either way. |
| 03:43.12 | [acl] | nahh i preffer 64 |
| 03:43.15 | [acl] | thats what i use at home |
| 03:43.32 | WisTilt2 | can do np. was it 10.4 os you remember? |
| 03:43.57 | WisTilt2 | or which do you want would be a better question? |
| 03:44.12 | [acl] | i think its 10.04. which is fine |
| 03:44.21 | [acl] | 10.04 LTS server is perfect |
| 03:45.17 | WisTilt2 | will get that setup then and let you know a day ahead of time before we pull down the old server. new one does daily backups also |
| 03:45.26 | [acl] | ahh awesome |
| 03:45.31 | [acl] | killer improvement |
| 03:45.42 | [acl] | i cant recall the number of times i wiped something |
| 03:45.54 | WisTilt2 | i know the feeling:) |
| 03:46.18 | [acl] | so yall doing this full time now huh .. lucky .. my hats go off to you |
| 03:47.36 | WisTilt2 | jonpry more so than me. i still have my office to contend with occasionally. we're working with at&t on a project so been kind of busy lately. |
| 03:50.32 | jonpry | stupid adb not working |
| 03:52.24 | [acl] | jebus no adb? thats like a one legged man in an ass kicking contest .. just not gonna do |
| 03:52.39 | [acl] | but usb is fine ? |
| 03:52.42 | jonpry | we have usb ethernet |
| 03:52.44 | [acl] | like storage and stuff |
| 03:52.49 | [acl] | hmm |
| 03:53.03 | jonpry | no storage because no android composite. thats what i'm trying to do now |
| 03:53.17 | [acl] | ahh ic |
| 03:58.24 | *** join/#htc-linux Rob2223 (~Miranda@p4FFF1277.dip.t-dialin.net) |
| 03:59.19 | *** join/#htc-linux MacDrunk (~marper@201.164.166.190) |
| 04:38.45 | *** join/#htc-linux XirXes (~xirxes@71-35-197-137.slkc.qwest.net) |
| 04:47.41 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-41-26.26-151.libero.it) |
| 04:54.09 | *** join/#htc-linux GPFerror (~GPF@ip72-208-193-231.ph.ph.cox.net) |
| 05:00.34 | jonpry | so close |
| 05:06.30 | [acl] | make some coffe.. and dont give up |
| 05:06.34 | [acl] | :-) |
| 05:08.58 | jonpry | i've got rocket fuel |
| 05:10.04 | jonpry | and i think i found it. no telling if it creates useful usb descriptors though |
| 05:10.40 | jonpry | [acl], r u going to try 39 on nand? |
| 05:10.51 | jonpry | it sucks for cdma though |
| 05:11.29 | jonpry | you might be interested in that problem as it exists on all wince devices on all kernels |
| 05:11.44 | [acl] | nahh .. still comming my old stuff |
| 05:11.51 | [acl] | catching up on some emails |
| 05:12.02 | [acl] | wondering what didnt get commited |
| 05:12.03 | [acl] | or did |
| 05:12.27 | [acl] | not comming.. commiting :-p |
| 05:12.39 | jonpry | lol |
| 05:13.32 | jonpry | and we have liftoff |
| 05:13.37 | [acl] | nice |
| 05:14.32 | jonpry | hell yeah its nice :p |
| 05:14.47 | [acl] | hyc: dood you here ? |
| 05:15.05 | jonpry | other than needing new wifi firmware this 39 port is better in every respect than 27 |
| 05:15.22 | [acl] | damn |
| 05:15.27 | [acl] | big statement right there |
| 05:15.41 | [acl] | why does it need new firmware ? |
| 05:16.13 | [acl] | i guess htc doesnt have any .39 devices huh.. hmm |
| 05:16.56 | jonpry | newer bcm4329 driver because they change the wireless infrastructure apis. the new driver has some firmware interface changes, so... |
| 05:17.23 | jonpry | maybe could get it to work on old firmware but seems like a lot of work |
| 05:18.15 | [acl] | so thats your Achilles heel huh .. damn firmware |
| 05:18.52 | jonpry | yeah i guess so |
| 05:19.11 | jonpry | my secret plan is to submit a .27 patch to the new driver :p |
| 05:19.35 | [acl] | man good thing you are announcing it here.. gonna be a good secret :-) |
| 05:19.56 | jonpry | gotta get people prepared |
| 05:20.34 | jonpry | we also have 3.0 but its unstable for now |
| 05:20.48 | [acl] | now thats just another animal |
| 05:21.23 | [acl] | i need to see what emwe plans for .35.. |
| 05:21.46 | jonpry | i would try 39 first |
| 05:22.15 | [acl] | i want to.. but i need to preppare for haret and all that. |
| 05:22.31 | jonpry | tester isn't on winmo? |
| 05:22.44 | [acl] | i had to nand it.. to prove people wrong that my device isnt magical |
| 05:23.02 | [acl] | but i could winmo back.. |
| 05:23.34 | jonpry | i fixed msm_nand. except maybe partitions |
| 05:23.58 | [acl] | no partitions ? what do you mean |
| 05:24.19 | jonpry | iirc there is some code in 27 for taking atags and setting up the msm_nand partitions |
| 05:24.35 | [acl] | yep.. |
| 05:24.43 | [acl] | because partitions as passed via atag |
| 05:24.48 | jonpry | yeah i don't have that |
| 05:24.52 | [acl] | :-( |
| 05:24.55 | smiley_ | is there any fix for the "kernel BUG at drivers/char/tty_ldisc.c:199!" kernel panic? I seem to get it on both my RAPH100 and my kovsky.. apart from that it's so stable |
| 05:24.56 | *** join/#htc-linux Termana (~bradley@122.151.98.151) |
| 05:25.17 | [acl] | smiley_: the guy you are lookging for is Alex |
| 05:25.36 | [acl] | smiley_: he practically invented the kovksy .. |
| 05:25.42 | jonpry | [acl] i haven't been able to crash this beast in over a week |
| 05:25.59 | [acl] | jonpry: dang... it has earned the name beast ? |
| 05:26.00 | [acl] | lol |
| 05:26.02 | [acl] | awesome |
| 05:26.52 | jonpry | no sod, no reboots |
| 05:26.59 | smiley_ | [acl]: yeah :) did dig trough some logfiles and saw that the bug was mentioned here about a month ago.. drives me crazy since it's the only thing that makes my device to reboot ;) |
| 05:27.16 | jonpry | what is ldisc? |
| 05:27.21 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 05:27.28 | smiley_ | it happens when pppd disconnects |
| 05:27.57 | jonpry | yeah our smd doesn't have the hangup code |
| 05:28.26 | smiley_ | or well it happens 1 time of 20 or so.. since it can run stable for a day or two |
| 05:28.27 | rpierce99 | tty_laserdisc |
| 05:29.14 | jonpry | there is a leo patch for adding that stuff |
| 05:29.31 | [acl] | jonpry: so yall remove spin lock protection? wondering how haretized yall are. I find it running native android code works better on nand |
| 05:30.04 | jonpry | spin lock on smd? |
| 05:30.15 | [acl] | jonpry: no i mean in general .. |
| 05:31.11 | jonpry | i haven't been running around removing spinlocks no |
| 05:31.35 | [acl] | lol |
| 05:31.42 | [acl] | no one is accusing you.. just asking bro ..lol |
| 05:31.58 | jonpry | i tried to do as much as possible to use 27 files as is, so we can pull patches |
| 05:32.17 | jonpry | imho that is the best tested best working code available for our devices anyways |
| 05:32.26 | hyc | tty_ldisc.c is the Line Discipline |
| 05:32.41 | [acl] | hyc: my good man i was looking for u .. |
| 05:32.41 | hyc | it's what provided generic Unix tty support on top of other serial devices |
| 05:32.51 | rpierce99 | hyc, i don't want to correct you, but it's obviously laserdisc |
| 05:32.52 | hyc | heya [acl] whats up |
| 05:32.58 | jonpry | rpierce99, we have adb! |
| 05:33.15 | rpierce99 | yay! <3 .39 |
| 05:33.16 | [acl] | hyc: im catching up on emails patches and what not. Just wondering if we ever agreed to put that ts calib script for everyone ? |
| 05:33.50 | jonpry | b1bc49... |
| 05:35.16 | [acl] | hyc: yes it was a long time ago.. like april.. lol.. im that behind. sorry |
| 05:35.52 | hyc | ah nope, unfortunately we got completely inconsistent results |
| 05:35.59 | hyc | same address doesn't apply to other devices |
| 05:36.18 | [acl] | that is true, but same goes for wifi and we get away with it. So you are saying it doesnt apply for same gsm ? |
| 05:36.26 | hyc | I think. |
| 05:36.33 | [acl] | just a matter of collecting all the offsets |
| 05:37.21 | hyc | I guess so. but we needed to know what data values to hunt for to locate it, unless you know a particular map of the firmware layout |
| 05:37.24 | *** join/#htc-linux tyween (~typhoon@pool-71-163-117-57.washdc.fios.verizon.net) |
| 05:37.50 | hyc | I found mine just by binary searching the memory... |
| 05:38.01 | [acl] | hyc: no i dont, but the dll is helpful. I guess ill research this |
| 05:38.34 | hyc | I would guess there must be a symbol table / directory somewhere that points to it, otherwise too many special cases for each device. dunno. |
| 05:39.26 | [acl] | ic.. |
| 05:40.04 | [acl] | as for the wifi, i moved completly to atags. But for haret i realized we can do the same the hd2 guys do. |
| 05:40.30 | [acl] | they rewrote the wifi nvs code to generate the nvram file |
| 05:40.43 | [acl] | all they add at the end is the mac address |
| 05:40.59 | [acl] | and voila.. make a /proc/calirbation entry and no more ugly script |
| 05:41.52 | [acl] | hell ill prob write this.. lol.. just need to know if we have the mac address on smem somewhere.. |
| 05:42.55 | jonpry | i think bcm supports macless nvram |
| 05:43.15 | jonpry | cause the driver can set it, or generate a random one every time |
| 05:43.26 | [acl] | shiet.. |
| 05:43.38 | [acl] | i wish i knew |
| 05:44.22 | jonpry | but either way you can abuse the mac setting thing and just use one nvram for everybody |
| 05:44.27 | [acl] | then this is easier than punching a baby |
| 05:44.32 | rpierce99 | only problem with no/random is wifi APs that use mac filtering or static ip by mac |
| 05:44.33 | hyc | I wonder if bt is generating a new mac every time |
| 05:44.44 | hyc | I seem to always have to unpair and re-pair with my car unit |
| 05:44.50 | [acl] | ahh ic |
| 05:44.57 | [acl] | well its easy enough to dump from kernel |
| 05:44.59 | [acl] | so no worries |
| 05:45.02 | hyc | it never works twice in a row |
| 05:46.04 | jonpry | should be easy enough to query your mac |
| 05:46.21 | [acl] | jonpry: from kernel ? how ? |
| 05:46.36 | jonpry | no hyc's problem, from userland |
| 05:46.40 | hyc | yeah I'll look into it more later |
| 05:46.40 | [acl] | ahh ic |
| 05:47.20 | [acl] | anyways my good people. acl needs nap time. |
| 05:48.36 | jonpry | -DGET_CUSTOM_MAC_ENABLE |
| 05:49.35 | *** join/#htc-linux _twitch (~burning_a@49.114.96.58.static.exetel.com.au) |
| 05:56.19 | jonpry | hyc, when are you going to switch to 39 :) |
| 06:14.09 | hyc | probably soon ;) |
| 06:33.18 | *** join/#htc-linux dekar_ (~dekar@drms-590ecb89.pool.mediaWays.net) |
| 06:47.19 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 06:48.53 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-121.dynamic.mnet-online.de) |
| 06:50.39 | *** join/#htc-linux rzk_ (~rzk@95-25-85-69.broadband.corbina.ru) |
| 06:56.31 | *** join/#htc-linux KSubedi (43a1cc47@gateway/web/freenode/ip.67.161.204.71) |
| 06:57.31 | KSubedi | goddamn iamgpc, doesnt release source code for libs |
| 07:04.11 | *** join/#htc-linux mitsutaka (~mitsutaka@rt.miraclelinux.com) |
| 07:14.33 | *** join/#htc-linux GlemSom (~glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 07:22.09 | smiley_ | I tried compiling 2.6.35 from git but the zImage become about 2.2MB and haret doesn't seem to like it.. I have set INITRD_OFFSET 0x608000 anything more that can be done? it freezes just after the phone buzz |
| 07:24.57 | KSubedi | thats weird |
| 08:22.43 | *** join/#htc-linux rob_w (~bob@ppp-93-104-176-215.dynamic.mnet-online.de) |
| 08:26.38 | *** join/#htc-linux johnb81 (~IceChat77@78.161.20.127) |
| 08:32.09 | *** join/#htc-linux mitsutaka_ (~mitsutaka@rt.miraclelinux.com) |
| 08:52.17 | *** join/#htc-linux burning_aces (~burning_a@49.114.96.58.static.exetel.com.au) |
| 09:19.43 | *** join/#htc-linux DJWillis (djwillis@cpc3-bath5-2-0-cust220.aztw.cable.virginmedia.com) |
| 09:35.25 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 10:15.38 | *** join/#htc-linux apt (~apt@rikers.org) |
| 10:15.38 | *** topic/#htc-linux is Welcome to the HTC Linux project | Community portal & WiKi http://htc-linux.org | For IRC logs, HaRET & kernel mailing lists etc. see http://htc-linux.org/wiki/index.php?title=Contact | The htc-linux.org project is not affiliated with the HTC Corporation | This channel is for development purposes - Join #htc-linux-chat for offtopic |
| 10:18.35 | *** join/#htc-linux toastcfh (~toastcfh@41-32.200-68.tampabay.res.rr.com) |
| 11:04.47 | *** join/#htc-linux Detule (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 11:06.21 | *** join/#htc-linux johnb81 (~IceChat77@78.161.20.127) |
| 11:10.31 | *** join/#htc-linux helicopter88 (~helicopte@host231-117-dynamic.32-79-r.retail.telecomitalia.it) |
| 11:22.57 | *** join/#htc-linux Nadia (~Nadia@p578F2073.dip.t-dialin.net) |
| 11:25.29 | Nadia | hallo I have a problem with the homepage wich I create, I can open the maninsite under commandline but if I want to open the other link from the mainpage is show my page erro? could some one help my in this case |
| 11:27.32 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 11:42.07 | *** join/#htc-linux toastcfh (~toastcfh@unaffiliated/toastcfh) |
| 11:45.45 | *** join/#htc-linux gauner1986 (~Miranda@p5B383F45.dip.t-dialin.net) |
| 11:56.55 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 12:08.36 | *** join/#htc-linux helicopter88 (~helicopte@host231-117-dynamic.32-79-r.retail.telecomitalia.it) |
| 12:21.13 | *** join/#htc-linux gauner1986 (~Miranda@p5B383F45.dip.t-dialin.net) |
| 12:43.29 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-166-52.netcologne.de) |
| 12:51.38 | *** join/#htc-linux helicopter88 (~helicopte@host231-117-dynamic.32-79-r.retail.telecomitalia.it) |
| 13:08.20 | *** join/#htc-linux helicopter88 (~helicopte@host231-117-dynamic.32-79-r.retail.telecomitalia.it) |
| 13:31.45 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 13:32.05 | *** join/#htc-linux jonpry (~jon@199.85.236.239) |
| 14:02.11 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 14:32.17 | rpierce99 | jonpry: ping |
| 14:32.18 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-41-26.26-151.libero.it) |
| 14:33.13 | *** join/#htc-linux jonpry (~jon@199.85.236.239) |
| 14:49.56 | rpierce99 | jonpry: this latest .39 autobuild (gb1bc42a) autoconnects to adb in ubuntu (yay) but I think it's still different than .27 because it doesn't work on my mac. Also the wireless on my hyc build (stock, no firmware changes) scans, lists, tries to connect, fails to auth, is that normal? |
| 14:50.49 | jonpry | yeah it will do that without the right firmware |
| 14:51.35 | rpierce99 | will the right firmware break .27? |
| 14:52.23 | jonpry | yeah it will but afaik there is not really a way to install the right firmware as it is extracted from nand |
| 14:53.49 | *** join/#htc-linux Rajko (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 14:54.11 | jonpry | the usb device ids are probably different than 27 but this is better because it will work on windows without modding the inf |
| 14:54.42 | rpierce99 | hmmmm, surprised that windows will work but my mac won't |
| 14:55.11 | jonpry | if you had it working before it was probably from hacking it into submission |
| 14:55.32 | rpierce99 | no it just worked as soon as I installed and ran it |
| 14:55.35 | rpierce99 | it was beautiful |
| 14:55.59 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 14:57.52 | rpierce99 | it's also not showing the usb debugging connected indicator in android, not sure what that means exactly |
| 14:58.16 | jonpry | i'm not sure what sets that off precisely |
| 14:59.28 | jonpry | but we have a new usb connect deal thats intant instead of 5 seconds polling but is not hooked up to everything it could be |
| 15:00.23 | jonpry | i upgraded our 3.0 tree a little bit and the stability problems are gone but all the fixes and drivers from the past week need to be added |
| 15:00.47 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 15:00.52 | *** join/#htc-linux noobhands (5d9ddff6@gateway/web/freenode/ip.93.157.223.246) |
| 15:04.19 | *** join/#htc-linux Detule (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 15:10.36 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 15:21.16 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-83-121.dynamic.mnet-online.de) |
| 15:38.53 | *** join/#htc-linux arrrghhh (~arrrghhh@unaffiliated/arrrghhh) |
| 15:46.12 | *** join/#htc-linux rob_w (~bob@ppp-93-104-176-215.dynamic.mnet-online.de) |
| 15:46.13 | *** join/#htc-linux rob_w_ (~bob@ppp-93-104-176-215.dynamic.mnet-online.de) |
| 16:08.21 | *** join/#htc-linux programmer8922 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 16:11.02 | *** join/#htc-linux onen|openBmap (~quassel@vbo91-1-89-87-201-85.dsl.sta.abo.bbox.fr) |
| 16:11.31 | *** join/#htc-linux programmer8922 (~Evan@206-81-207-226.dia.static.qwest.net) |
| 16:12.34 | *** join/#htc-linux GNUtoo-N900 (~root@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 16:29.14 | *** join/#htc-linux Alex[sp3dev] (~alexander@86.110.163.19) |
| 16:36.30 | *** join/#htc-linux GNUtoo (~GNUtoo@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 16:42.11 | *** join/#htc-linux Echo31 (~olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 16:43.06 | *** join/#htc-linux iam123sit (~iam123sit@r74-192-172-253.gtwncmta01.grtntx.tl.dh.suddenlink.net) |
| 16:43.17 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless251.wirelesstcp.net) |
| 16:44.36 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-41-26.26-151.libero.it) |
| 16:45.32 | jonpry | hey WisTilt2 |
| 16:45.46 | WisTilt2 | jonpry: looks like you've fixed adb? saw the commits but haven't tried it yet. getting ready to tackle the acoustic myself. |
| 16:45.54 | WisTilt2 | morning |
| 16:46.02 | jonpry | yeah adb working |
| 16:46.21 | jonpry | i upgraded to 3.0-rc2 and moved over all our recent 39 commits |
| 16:46.23 | WisTilt2 | cool. what's the 3.0 merge? is rc2 out finally? |
| 16:46.40 | WisTilt2 | lol, guess i should wait for a bit before i start asking questions |
| 16:46.55 | jonpry | its been out for a long time, i finally cloned the tree so i could make an rc1-rc2 patch |
| 16:47.10 | jonpry | expecting rc3 tomorrow |
| 16:47.48 | jonpry | it fixed dma problems so cam and 3d work reliably now but i still got one sr |
| 16:47.59 | WisTilt2 | so you have all the 39 stuff applied over to 3.0 now? is it still losing its mind after awhile or have you tried it yet? |
| 16:48.12 | jonpry | then i f'd it up and zonked the ram console. so no idea what happened |
| 16:49.02 | jonpry | i think we should still develop on 39. 3.0 not good enough yet |
| 16:49.24 | WisTilt2 | well if i dont get interrupted too much here at the office today i'll hopefully get all the good parts of acoustic working on 39. |
| 16:50.14 | arrrghhh | howdy folks |
| 16:50.29 | arrrghhh | i was reading the logs, re: jb's acoustic code - i think he's still polishing it. |
| 16:50.38 | arrrghhh | although looking at the commits, he's close to being done... |
| 16:50.43 | jonpry | sounds good WisTilt2 |
| 16:52.08 | arrrghhh | WisTilt2, wanted to ask you - did the NAND autobuild for ACL change URL's...? |
| 16:55.28 | WisTilt2 | nope still htcdevs.wirelesstcp.net, we haven't moved it to new server yet but even after we do it will keep the same url. |
| 16:56.03 | arrrghhh | hrm |
| 16:56.22 | WisTilt2 | [acl] may have disabled the web side back when we saw it getting a brute force attack and may not have turned it back on. |
| 16:56.29 | arrrghhh | ah |
| 16:56.35 | arrrghhh | yea i was going to say i can't seem to hit it. |
| 16:56.46 | arrrghhh | i keep getting redirected, which makes me question my browser settings. |
| 16:56.57 | WisTilt2 | the server itself is up, i just checked it so he'll have to enable httpd again probably. |
| 16:57.09 | arrrghhh | alrighty then, np. |
| 16:57.40 | arrrghhh | had someone complain all the links were broken, and i knew you were migrating... wanted to make sure that the URL didn't change ;) |
| 16:57.48 | WisTilt2 | yeah i just checked and he has the httpd shutdown |
| 16:57.59 | arrrghhh | cool. i'll bug him then :P |
| 17:02.10 | *** join/#htc-linux GNUtoo (~GNUtoo@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 17:34.21 | *** join/#htc-linux mes (~mes@S0106000ce55186df.cc.shawcable.net) |
| 17:37.45 | *** join/#htc-linux gauner1986 (~Miranda@p5B383F45.dip.t-dialin.net) |
| 17:49.19 | *** join/#htc-linux GlemSom (~glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 17:54.47 | *** join/#htc-linux GNUtoo (~GNUtoo@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 18:17.40 | WisTilt2 | jonpry: i think one of the last several commits broke touchscreen when in a call. can't end call, speakerphone, etc other than hitting the end button. im ready to test dual mic/cancellation in speakerphone mode but cant select it. |
| 18:18.14 | jonpry | i've sort of noticed that |
| 18:18.40 | jonpry | for me its when phone wakes up from a phone call the touchscreen is locked |
| 18:19.00 | jonpry | outgoing calls are fine |
| 18:19.28 | WisTilt2 | i noticed it the other day but didnt think anything of it at the time and think it worked before any of the wifi changes. |
| 18:19.36 | jonpry | and hitting power twice will unlock the touch |
| 18:19.44 | jonpry | nah, no wifi |
| 18:20.09 | jonpry | might have been tssc_manager changes for manikineko |
| 18:20.11 | WisTilt2 | so i can make a call, hit power twice and ts will work again for now? just need to test acoustic in speakerphone mode at this point. |
| 18:20.25 | jonpry | should work |
| 18:20.34 | WisTilt2 | ok ill reboot and try it |
| 18:21.07 | jonpry | outgoing should just work |
| 18:21.43 | jonpry | working for me anyways |
| 18:21.45 | WisTilt2 | outgoing was what i did and it stopped ts from working. |
| 18:21.56 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 18:22.25 | jonpry | and my kernel doesn't have tssc manager changes |
| 18:24.16 | WisTilt2 | was that the zoom bar stuff? |
| 18:24.22 | jonpry | yeah |
| 18:24.48 | jonpry | looks like he's not sending ABS_X and ABS_Y |
| 18:24.48 | WisTilt2 | so i can just revert that commit locally? |
| 18:24.56 | jonpry | sure |
| 18:25.06 | WisTilt2 | or let you fix it:) |
| 18:25.17 | jonpry | i don't get whats wrong with it |
| 18:25.26 | jonpry | i'll let him mess with it |
| 18:25.29 | jonpry | revert revert |
| 18:25.59 | jonpry | its 9f9643cc5133e5c2aed7058b271cd46cd7f9b662 |
| 18:26.18 | WisTilt2 | ok ill do that. power twice still has no ts at all in a call. |
| 18:27.22 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 18:28.25 | jonpry | maybe it requires that xml file to work |
| 18:33.35 | *** join/#htc-linux helicopter88 (~helicopte@host231-117-dynamic.32-79-r.retail.telecomitalia.it) |
| 18:43.51 | jonpry | WisTilt2, did you see that patches that just showed up on the ml? |
| 18:44.53 | WisTilt2 | not yet, debugging this acoustic stuff so havent looked at my email lately. |
| 18:45.04 | WisTilt2 | this is nice having adb working again btw |
| 18:45.21 | Willd | How did you manage without? :o |
| 18:45.46 | jonpry | we had ethernet emulation and adb via tcp/ip |
| 18:45.57 | Willd | Oh :) |
| 18:47.43 | jonpry | arrrghhh, i think bluetooth works except for audio. i'm not sure what kind of things android can actually pair with, but something probably works\\\ |
| 18:51.08 | arrrghhh | lol |
| 18:51.09 | arrrghhh | ok |
| 18:52.24 | jonpry | need somebody to test that |
| 19:05.41 | jonpry | WisTilt2, did reverting the patch fix it? |
| 19:06.40 | WisTilt2 | yep totally back to normal. tracing an i2c error im getting when turning on the 3001 chip atm. |
| 19:07.01 | jonpry | thats caused by not releasing the adc3001 reset via microp |
| 19:07.23 | WisTilt2 | happening right during init though |
| 19:07.30 | WisTilt2 | init of the 3001 |
| 19:07.58 | jonpry | so. if chips in reset it doesn't respond on i2c |
| 19:10.22 | jonpry | i'm pretty sure all that adc3001 and a1010 stuff is crap. like you can do it, but a9 just does it again |
| 19:13.07 | jonpry | WisTilt2, you implemented micropklt_codec_set and micropklt_dualmic_set() ? |
| 19:13.54 | WisTilt2 | no not doing any of that since its only dealing with leds for looks. |
| 19:14.25 | jonpry | that bit vector does leds and the resets for adc3001 and a1010 |
| 19:16.00 | jonpry | i figured all that out a long time ago for getting sound on nand |
| 19:16.20 | WisTilt2 | where are you looking at that? only thing in dualmic and codec set is for leds |
| 19:17.06 | jonpry | its just a wire on the board and i know for a fact that if your don't set those microp bits adc3001 will never respond on the i2c bus |
| 19:19.01 | WisTilt2 | still dont see anything like that in those funcs, only led control. |
| 19:19.16 | jonpry | dude |
| 19:19.24 | jonpry | its just gpio |
| 19:19.38 | jonpry | and its hooked up to the adc3001 reset pin |
| 19:20.27 | WisTilt2 | i understand what you're saying but dont see anything in those funcs that do anything other than rhod_led_set? maybe im looking at wrong microp source? |
| 19:21.06 | jonpry | rhod_led_set just tells the microp to set 8 of its pins to some state. some are in fact leds and some are things like the adc3001 reset |
| 19:21.38 | jonpry | micropklt_rhod_leds_set(micropklt_t->rhod_states | RHOD_DUALMIC_EN); |
| 19:21.46 | WisTilt2 | ah jeeze. ok got it. guess RHOD_DUALMIC_EN and codec masks are what i didnt look at |
| 19:22.06 | jonpry | :) |
| 19:22.06 | WisTilt2 | i just saw leds and went passed those. |
| 19:22.25 | WisTilt2 | why we'd have that in led control is stupid |
| 19:23.02 | jonpry | originally it only had leds on it. 5 devices and some more reversing later it makes less sense |
| 19:40.38 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 19:42.02 | *** join/#htc-linux arif-ali (~arif-ali@82-71-22-204.dsl.in-addr.zen.co.uk) |
| 20:47.33 | *** join/#htc-linux apt (~apt@rikers.org) |
| 20:47.33 | *** topic/#htc-linux is Welcome to the HTC Linux project | Community portal & WiKi http://htc-linux.org | For IRC logs, HaRET & kernel mailing lists etc. see http://htc-linux.org/wiki/index.php?title=Contact | The htc-linux.org project is not affiliated with the HTC Corporation | This channel is for development purposes - Join #htc-linux-chat for offtopic |
| 20:47.47 | *** join/#htc-linux khorben_ (~dont@2002:53ec:d9a1::1) |
| 21:00.09 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 21:01.23 | *** join/#htc-linux jonnyhall1bmx1 (5c0c46cc@gateway/web/freenode/ip.92.12.70.204) |
| 21:04.59 | *** join/#htc-linux ocm (~xc43m@189.152.34.206) |
| 21:38.48 | *** join/#htc-linux bartman` (~bart@2607:f2c0:a000:175:2e0:81ff:fe47:3d01) |
| 22:06.33 | WisTilt2 | jonpry: if you're not out boating can you take a look at something in a1010.c and see if you agree with my opinion. |
| 22:12.33 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 22:19.22 | *** join/#htc-linux nautis (~nautis@adsl-99-50-127-174.dsl.pltn13.sbcglobal.net) |
| 22:37.00 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 22:38.28 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-fxenikbxakahebld) |
| 23:11.14 | *** join/#htc-linux vampirefo (~chatzilla@c-174-53-64-157.hsd1.wv.comcast.net) |
| 23:19.05 | *** join/#htc-linux toastcfh (~toastcfh@41-32.200-68.tampabay.res.rr.com) |
| 23:19.32 | *** join/#htc-linux toastcfh (~toastcfh@unaffiliated/toastcfh) |
| 23:26.59 | jonpry | sup WisTilt2 |
| 23:27.44 | WisTilt2 | yo, can you take a quick look at something in a1010.c |
| 23:29.50 | WisTilt2 | in A1010_fops, im questioning the .ioctl and think that should be .unlocked_ioctl along with the prototype for A1010_ioctl, which should be long? |
| 23:30.54 | WisTilt2 | while you're looking at that im about done adding the arm9 restart so we don't have to keep going through the power down to reboot. |
| 23:31.11 | WisTilt2 | power off i meant |
| 23:34.41 | jonpry | umm, not sure, whats wrong with regular ioctl? brb |
| 23:36.46 | WisTilt2 | everything else uses unlocked_ioctl and i got errors compiling with .ioctl so already changed it and a1010 driver is now registering so its good now. |
| 23:45.25 | *** join/#htc-linux GPFerror_ (~GPF@ip72-208-193-231.ph.ph.cox.net) |