| 00:02.30 | *** part/#htc-linux ftoz (~root@ip-85-161-144-150.eurotel.cz) |
| 00:02.49 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 00:03.21 | jonpry | maybe there is a memory map problem again |
| 00:03.59 | WisTilt2 | just booted and got service, good so far |
| 00:04.33 | WisTilt2 | man once it settles down after initial boot this fb is so much faster |
| 00:05.35 | WisTilt2 | however, just froze when trying to start a call. microp still running though but everything else locked up |
| 00:06.38 | WisTilt2 | usb still working though but telnet svc dead so cant pull dmesg |
| 00:06.49 | jonpry | WisTilt2, here is it blowing up early: http://pastebin.com/MGWhMG1x |
| 00:07.50 | jonpry | only happens now and then. always exactly the same stack trace |
| 00:08.51 | WisTilt2 | hmm, whats causing line 986? console memory get changed by something? |
| 00:09.54 | jonpry2 | if usb is working telnet is 9 times out of 10 |
| 00:10.25 | WisTilt2 | something got trashed in virtual memory. maybe vm alloc didnt complete but i dont see any binder error pertaining to it |
| 00:18.04 | WisTilt2 | jonpry, yeah something in virtual kernel memory layout is wrong it looks like. |
| 00:18.48 | WisTilt2 | does this 3.0 have the fixup stuff for rhods in it? |
| 00:21.28 | jonpry2 | WisTilt2, it should |
| 00:21.36 | jonpry2 | board-htcrhodium.c ? |
| 00:22.48 | WisTilt2 | yeah thats it. is that the exact same code from .27 with no changes? |
| 00:23.27 | jonpry2 | i removed the #ifdef SMI2 |
| 00:23.56 | jonpry2 | i've been over it a billion times. seems like we should be good with 99 and 78 mb |
| 00:23.56 | WisTilt2 | thats in pmem.c you talking about? |
| 00:24.23 | jonpry2 | its also in the board file because it frees up some ram |
| 00:24.59 | jonpry2 | its not totally clear to me that 39 vmalloc can support better than 4MB granularity |
| 00:26.27 | WisTilt2 | so 99 would need to be 100 or 96 then |
| 00:27.17 | jonpry2 | right |
| 00:27.19 | WisTilt2 | i always questioned the even boundaries we didn't have in .27 |
| 00:27.37 | WisTilt2 | on our device all our memory is in 4mb chunks |
| 00:27.56 | stinebd | absurd |
| 00:28.10 | jonpry2 | on 35 there is vmalloc feature like ARCH_HAS_HOLES or something that brings it downto 1mb |
| 00:28.25 | jonpry2 | presumably at performance cost, so what is the point :p |
| 00:28.36 | stinebd | it should be a single chunk |
| 00:28.51 | WisTilt2 | on an even boundary though |
| 00:29.10 | WisTilt2 | let me look at the docs, there is something detailing that |
| 00:30.23 | jonpry2 | the trouble is we don't have a deterministic test. |
| 00:34.00 | jonpry2 | <PROTECTED> |
| 00:36.50 | jonpry2 | anyone ever figure out what is happening to ebin+107 up to ebin end? |
| 00:36.54 | WisTilt2 | are we configured linear memory map or interleaving do you know? |
| 00:37.27 | jonpry2 | isn't that an sdram controller option? |
| 00:37.33 | WisTilt2 | yes |
| 00:37.34 | jonpry2 | we don't ever configure it afaik |
| 00:37.47 | WisTilt2 | bank_il |
| 00:38.30 | jonpry2 | its however winmo leaves it. its probably very hard to change bank_il |
| 00:49.03 | WisTilt2 | jonpry, afaict it just specifies even boundaries, nothing about minimum as long as they're even. |
| 00:49.47 | WisTilt2 | i think the 128-50 is ok but the 99 needs to be even possibly |
| 00:50.38 | jonpry2 | tis not the problem |
| 00:52.30 | jonpry2 | its possible that none of this stuff is related |
| 00:53.16 | jonpry2 | maybe uevent crashes from some weirdo startup timing. power collapse doesn't work the first time for any number of reasons, and random reboots. well those just happen |
| 00:54.12 | WisTilt2 | running locked at 528mhz always have anything to do with it? |
| 00:55.44 | jonpry2 | i dunno maybe |
| 00:58.44 | jonpry2 | i think it should be able to run at rated speed |
| 00:59.19 | jonpry2 | always the question of why exactly hw3d doesn't work |
| 01:01.39 | *** join/#htc-linux programmer8922 (~Evan@173-12-203-125-Albuquerque.hfc.comcastbusiness.net) |
| 01:03.29 | *** join/#htc-linux ORi| (~ORi@91.181.174.105) |
| 01:16.19 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 01:19.32 | *** join/#htc-linux raymonddull (~raymonddu@24-247-194-130.dhcp.monr.mi.charter.com) |
| 01:22.26 | *** join/#htc-linux hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) |
| 01:23.54 | WisTilt2 | jonpry, gotta run but ill probably be on later from home. |
| 01:24.29 | *** join/#htc-linux ray|yar (~raymonddu@24-247-194-130.dhcp.monr.mi.charter.com) |
| 01:33.01 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 01:36.34 | *** join/#htc-linux HardDisk_WP (~marco@wikipedia/harddisk) |
| 02:07.47 | *** join/#htc-linux tjs_bsd (~tjs@mail.CDPA.cc) |
| 02:15.50 | *** join/#htc-linux programmer89221 (~Evan@173-12-203-125-Albuquerque.hfc.comcastbusiness.net) |
| 02:26.42 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 02:48.13 | *** join/#htc-linux FlawlesStyle (~LOL@208.43.77.85-static.reverse.softlayer.com) |
| 02:54.20 | *** join/#htc-linux defendthecommons (~defendthe@50-48-17-74.drr05.mdtw.ny.frontiernet.net) |
| 02:59.34 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 03:01.30 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 03:12.11 | *** join/#htc-linux Mavy-bnc (mavfree@91.196.169.2) |
| 03:12.29 | *** join/#htc-linux Rob2223 (~Miranda@p5DE4B4F4.dip.t-dialin.net) |
| 03:24.22 | *** join/#htc-linux jonpry2 (~jon@74.115.212.7) |
| 03:25.01 | *** join/#htc-linux jonpry (~jon@74.115.212.7) |
| 04:04.59 | *** join/#htc-linux tigersax (tigersax@24.72.191.170) |
| 04:05.13 | tigersax | hello everyone |
| 04:06.59 | *** join/#htc-linux GNUtoo (~GNUtoo@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 04:07.02 | tigersax | wow it has been a while since i have done any kind of chatting on irc or computer chats for that matter but i was in need of some answers that i have not been able to find out about the htc tilt 2 and android |
| 04:09.00 | tigersax | I know that most get mad about people askin questions all the time and not reading but I have been reading just can't seem to find the specific thing i need to know |
| 04:34.19 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
| 04:36.55 | *** join/#htc-linux programmer8922 (~Evan@173-12-203-125-Albuquerque.hfc.comcastbusiness.net) |
| 04:40.23 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 04:52.48 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 04:58.07 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 05:03.31 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 05:06.20 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 05:16.54 | *** join/#htc-linux avinashhm (~avinash-h@192.94.92.14) |
| 05:19.45 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-gzassnonctchnbij) |
| 05:23.54 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 05:26.41 | *** join/#htc-linux c403 (~xc43m@189.152.219.207) |
| 05:27.15 | *** join/#htc-linux ocm (~xc43m@189.152.219.207) |
| 05:29.22 | *** join/#htc-linux ocm7 (~xc43m@189.152.219.207) |
| 05:31.27 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 05:54.03 | *** join/#htc-linux ocm (~xc43m@189.152.219.207) |
| 06:18.05 | *** join/#htc-linux |Jeroen| (~jeroen@d5152B25B.access.telenet.be) |
| 06:26.09 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-71-25.26-151.libero.it) |
| 06:31.48 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 06:42.04 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 06:50.58 | *** join/#htc-linux mes (~mes@sentry.lazo.ca) |
| 06:53.55 | *** join/#htc-linux Markinus (~Adium@212.255.16.246) |
| 06:59.16 | *** join/#htc-linux ocm7 (~xc43m@189.152.219.207) |
| 07:01.37 | *** join/#htc-linux ocm (~xc43m@189.152.219.207) |
| 07:03.43 | *** join/#htc-linux ocm7 (~xc43m@189.152.219.207) |
| 07:21.43 | *** join/#htc-linux rob_w (~bob@ppp-188-174-99-237.dynamic.mnet-online.de) |
| 07:30.59 | *** join/#htc-linux Bry8Star|Unix (~Bry8Star|@gateway/tor-sasl/bry8star-) |
| 07:48.33 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 07:54.09 | *** join/#htc-linux arif-ali (~arif-ali@ip-81-23-53-226.ask4internet.com) |
| 07:59.49 | *** join/#htc-linux gauner1986 (~Miranda@p5B383EC3.dip.t-dialin.net) |
| 08:08.09 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 08:24.34 | *** join/#htc-linux damo222 (~damien@210.4.238.144) |
| 08:27.29 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-88-34.dynamic.mnet-online.de) |
| 08:32.20 | damo222 | which part of the official android toolchain do i need to cross compile on a linux-x86 machine to arm? i dont want to clone the whole prebuilt.git repo |
| 08:33.49 | damo222 | do i need everything in platform/prebuilt.git/linux-x86/toolchain or even more? |
| 08:33.49 | *** join/#htc-linux kvaster (~kvaster@193.151.40.175) |
| 08:43.23 | *** part/#htc-linux damo222 (~damien@210.4.238.144) |
| 08:55.59 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 09:04.05 | *** join/#htc-linux mastermerlin (~Adium@p4FEE48CE.dip.t-dialin.net) |
| 09:20.06 | *** part/#htc-linux sado1 (~sado1@static.213-133-103-196.clients.your-server.de) |
| 09:20.18 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 09:27.05 | *** join/#htc-linux kvaster (~kvaster@193.151.40.175) |
| 09:54.00 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 10:27.08 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 10:29.37 | *** join/#htc-linux GNUtoo (~GNUtoo@host148-3-dynamic.244-95-r.retail.telecomitalia.it) |
| 10:33.26 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-166-52.netcologne.de) |
| 10:36.41 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 10:37.15 | *** join/#htc-linux kvaster (~kvaster@leased-line-93-125-0-84.telecom.by) |
| 11:07.25 | *** join/#htc-linux Bry8Star|Unix (~Bry8Star|@gateway/tor-sasl/bry8star-) |
| 11:14.14 | *** join/#htc-linux damo22 (~dczammit@c114-76-75-108.thoms3.vic.optusnet.com.au) |
| 12:00.21 | *** join/#htc-linux damo22 (~dczammit@c114-76-75-108.thoms3.vic.optusnet.com.au) |
| 12:11.17 | *** join/#htc-linux Ceesheim (~ceesheim@p5B346F8A.dip.t-dialin.net) |
| 12:17.42 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-150-102.dynamic.sbb.rs) |
| 12:26.27 | *** join/#htc-linux kvaster (~kvaster@leased-line-93-125-0-84.telecom.by) |
| 12:43.16 | *** join/#htc-linux khorben_ (~dont@2002:53ec:d9a1:1:221:28ff:fe14:b106) |
| 12:43.46 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-71-25.26-151.libero.it) |
| 12:46.10 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 12:59.43 | *** part/#htc-linux damo22 (~dczammit@c114-76-75-108.thoms3.vic.optusnet.com.au) |
| 13:17.44 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-88-34.dynamic.mnet-online.de) |
| 13:29.10 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 13:31.51 | *** join/#htc-linux |Jeroen| (~jeroen@d5152B25B.access.telenet.be) |
| 13:41.27 | *** join/#htc-linux jonpry2 (~jon@199.85.236.239) |
| 13:41.33 | *** join/#htc-linux jon__ (~jon@199.85.236.239) |
| 13:42.20 | *** join/#htc-linux helicopter88 (~kvirc@host46-116-dynamic.13-79-r.retail.telecomitalia.it) |
| 14:32.45 | *** join/#htc-linux jonpry2 (~jon@74.115.212.23) |
| 14:32.55 | *** join/#htc-linux jon__ (~jon@74.115.212.23) |
| 14:33.58 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 14:41.35 | *** join/#htc-linux johnb81 (~IceChat77@78.161.20.127) |
| 14:43.34 | johnb81 | does anyone have gpsdriver.dll for hd2? |
| 14:48.46 | *** join/#htc-linux rzk_ (~rzk@95-25-184-117.broadband.corbina.ru) |
| 14:58.18 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 14:58.21 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-71-25.26-151.libero.it) |
| 15:00.50 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 15:00.56 | *** join/#htc-linux emwe (~emwe@cable-86-56-10-158.cust.telecolumbus.net) |
| 15:05.25 | *** join/#htc-linux rzk_ (~rzk@89-178-75-165.broadband.corbina.ru) |
| 15:05.40 | *** join/#htc-linux gauner1986 (~Miranda@p5B383EC3.dip.t-dialin.net) |
| 15:06.45 | *** join/#htc-linux programmer8922 (~Evan@173-12-203-125-Albuquerque.hfc.comcastbusiness.net) |
| 15:08.25 | *** join/#htc-linux lxsameer (~lxsameer@unaffiliated/lxsameer) |
| 15:11.00 | *** join/#htc-linux helicopter88 (~kvirc@host46-116-dynamic.13-79-r.retail.telecomitalia.it) |
| 15:11.19 | lxsameer | what should i use as MACHINE at the build time for HTC desire(Bravo)? |
| 15:12.49 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 15:13.16 | *** join/#htc-linux jonpry2 (~jon@199.85.236.239) |
| 15:13.46 | *** join/#htc-linux jon__ (~jon@199.85.236.239) |
| 15:20.52 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 15:24.09 | *** join/#htc-linux Andreyxxl1 (Andreyxxl@94.52.236.39) |
| 15:29.01 | *** join/#htc-linux sameerynho (~lxsameer@e7.6.be.static.xlhost.com) |
| 15:31.54 | dcordes | hi |
| 15:32.25 | sameerynho | dcordes: hi |
| 15:32.47 | sameerynho | dcordes: how do you build shr for hd2? what do you use for MACHIN |
| 15:40.39 | *** join/#htc-linux gauner1986 (~Miranda@p5B383EC3.dip.t-dialin.net) |
| 15:44.08 | dcordes | sameerynho: htcleo . be sure to use org.openembedded.dev (oe-core-contrib with meta-smartphone alternatively) and set the shr distro as well! |
| 15:45.23 | dcordes | sameerynho: for more SHR & Openembedded specifcic help also join #openmoko-cdevel (the channel name is misleading) and #oe (note thath the folks there are very strict about people not reading the oe manual and about distro (shr) specific questions ) |
| 15:45.31 | dcordes | ...respectively. |
| 15:46.16 | dcordes | sameerynho: please let me know if your build will succeed. I am also going to do a fresh shr build but have lack of time right now |
| 15:47.23 | *** join/#htc-linux helicopter88 (~kvirc@host46-116-dynamic.13-79-r.retail.telecomitalia.it) |
| 15:47.33 | sameerynho | dcordes: hmmm i don't get much from your talks :P , finally i installed a bootloader an cloned the shr repo |
| 15:47.48 | sameerynho | dcordes: and currently i'm reading shr build guide |
| 15:48.09 | sameerynho | dcordes: is there any link that help me to develop my build for Bravo |
| 15:48.14 | sameerynho | dcordes: i love reading |
| 15:52.07 | *** join/#htc-linux gauner1986 (~Miranda@p508C6FE9.dip.t-dialin.net) |
| 15:56.18 | dcordes | sameerynho: bravo and hd2 are the same on openembedded (shr) level |
| 15:56.23 | dcordes | sameerynho: - except for the kernel. |
| 15:56.51 | sameerynho | dcordes: shr use openembedded for building , am i right |
| 15:57.00 | dcordes | yes |
| 15:57.16 | dcordes | openembedded=metadata(recipes) bitbake=builder |
| 15:58.01 | sameerynho | dcordes: aha, does bb make the kernel too ? |
| 16:14.56 | *** join/#htc-linux raymonddull (~raymonddu@24-247-194-130.dhcp.monr.mi.charter.com) |
| 16:17.45 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless251.wirelesstcp.net) |
| 16:18.13 | WisTilt2 | jonpry: ping |
| 16:18.59 | WisTilt2 | take a look at msm_iomap-7x00.h when you get a chance. i think a couple things are wrong |
| 16:19.52 | emwe | hey WisTilt2. |
| 16:20.26 | WisTilt2 | morning emwe |
| 16:20.41 | emwe | luckily i got past that time of the day ;) |
| 16:20.45 | emwe | how are you doing? |
| 16:20.56 | WisTilt2 | yeah forget you're what 9-10hrs ahead of us? |
| 16:21.52 | emwe | 6:30pm here if that helps ;) |
| 16:22.06 | emwe | you still seeing that 6%/hour drain? |
| 16:22.07 | WisTilt2 | 9hrs ahead so good evening then |
| 16:22.22 | emwe | heh;) |
| 16:23.26 | WisTilt2 | i haven't messed with the drain yet but see 6% with .39, don't know if jonpry found it yet though. im going to try 3.0 now since he made a bunch of changes and see how it does. |
| 16:23.42 | jon__ | hey WisTilt2 |
| 16:24.23 | WisTilt2 | hey jonpry. something may be wrong in the iomap file |
| 16:24.43 | jonpry | ok which one? |
| 16:24.54 | emwe | WisTilt2: as i look at the iomap file, something's different... strange. looking it up where it came from... |
| 16:25.36 | WisTilt2 | we have vic base at 0xE0000000 now. dmov base and below are all 4k so should start at 0xE0001000 not 2000, that's just a memory hole. i did find a couple other things that i think are wrong.... |
| 16:25.39 | *** join/#htc-linux Alex[sp3dev] (~alexander@86.110.163.19) |
| 16:26.01 | emwe | hey Alex[sp3dev] |
| 16:26.43 | WisTilt2 | we have MSM_DEBUG_UART_BASE 0xE1000000 which is same as the spl_base. also mdp_size is wrong, should be 1M not 0x000F0000 |
| 16:26.49 | Alex[sp3dev] | emwe: heya |
| 16:26.56 | jonpry | WisTilt2, i'm not too concerned about 4k of missing vm. you can change it if you like buts its not blowing up our kernel or anything |
| 16:27.23 | WisTilt2 | yeah thats just a wasted 4k block, just thought it should stay in line. |
| 16:28.16 | jonpry | DEBUG_UART is not compiled in |
| 16:28.19 | WisTilt2 | mdp_base is also 0x000F0000 in .27 but docs show that as 1M and currently its 900k |
| 16:29.43 | jonpry | wouldn't that blow something up if it were wrong? |
| 16:29.57 | jonpry | like mdp is doing ioremap on that space |
| 16:31.15 | *** join/#htc-linux lxsameer__ (~lxsameer@31.57.239.28) |
| 16:31.17 | jonpry | i'm tempted to bisect the stability problem. i |
| 16:31.19 | WisTilt2 | dont know but mdp is 00000-FFFFF so if we're only sizing it at F0000 what happens to the remaining memory that's not allocated if it gets used and steps on whatever is next in line? |
| 16:31.21 | emwe | jonpry: you recently nagged about my pmem.c being not up to date. ofc you where right. didn't figure it missed the whole camera updates from .27. sorry for that. |
| 16:31.24 | jonpry | 'm 99% sure i aused this |
| 16:32.51 | jonpry | WisTilt2, in most scenarios i would expect the vm after mdp base to not be valid and cause kernel panic |
| 16:33.15 | Alex[sp3dev] | but it is still f0000 in 27.. should it be fixed anyway? |
| 16:33.46 | WisTilt2 | that's what we're seeing though right? im just saying docs specify an additional 64k we don't currently account for. |
| 16:33.47 | jonpry | whats up with ad5_base. does dsp have its own 13mb, why are we allocating it pmem? |
| 16:34.39 | jonpry | definitely worth a try |
| 16:36.17 | WisTilt2 | may be a waste of time but i think all the iomap's in .27 and up should at least be what they should be according to docs. no telling what's stepping on what. |
| 16:37.05 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-88-34.dynamic.mnet-online.de) |
| 16:37.55 | jonpry | its booting anyways |
| 16:38.23 | WisTilt2 | adsp is 0xAC000000-0xAFFFFFFF |
| 16:38.42 | jonpry | yeah whats up with that |
| 16:38.56 | jonpry | we also allocate 13mb of ram |
| 16:39.10 | WisTilt2 | that's its own memory so yeah, why is it being allocated again |
| 16:39.18 | Alex[sp3dev] | maybe it's used for userland crap? |
| 16:40.37 | jonpry | 1mb mdp gave me the first successful collapse without usb |
| 16:41.25 | Alex[sp3dev] | damn. on 35 i had panics and aborts when mdp hung if i didn't comment out debug registers dump. maybe i need to adjust iomap and it will just work |
| 16:42.22 | *** join/#htc-linux balans21 (~Gebruiker@82-170-217-205.ip.telfort.nl) |
| 16:43.49 | jonpry | spontaneous reboot |
| 16:45.08 | jonpry | but i had to play music to cause it |
| 16:45.53 | jonpry | if we could get all 13mb back from adsp that would be awesome |
| 16:46.15 | WisTilt2 | in the current pmem.c for 3.0 we alloc 8mb for adsp it looks like? |
| 16:46.45 | Alex[sp3dev] | yeah.. i wonder whether we should disassemble camera lib and reimplement the functions still not done or just use software encoder for jpeg? |
| 16:47.46 | jonpry | Willd, iirc that used to be 13. maybe wvga camera required more |
| 16:49.37 | WisTilt2 | jonpry so changing mdp size to 1mb where it should be did something? |
| 16:50.26 | emwe | jonpry: you guys workin on the 3.0.0-rc1, yes? |
| 16:50.41 | WisTilt2 | yep |
| 16:51.24 | emwe | ok |
| 16:51.31 | jonpry | WisTilt2, i can't say for sure. take a lot more tests for statistical significance. especially since this would for a relayout of vm giving us all new symptoms |
| 16:52.36 | WisTilt2 | let me finish checking the rest of these sizes with docs. i have half a dozen more to check |
| 16:52.36 | jonpry | absolutely nothing in ramconsole about the reboot |
| 16:53.20 | jonpry | i caused this at somepoint |
| 16:54.17 | mes | is anyone else seeing this? Fetching projects: 1% (2/163) fatal: protocol error: bad line length |
| 16:55.20 | mes | this would be android.git.kernel.org failing |
| 16:56.00 | jonpry | i'm still using a donut toolchain |
| 16:56.51 | WisTilt2 | where did the phy addresses for sdc1-4 come from? they are not right |
| 16:57.12 | Alex[sp3dev] | lol really? on 27? |
| 16:57.24 | WisTilt2 | let me see what .27 has, im looking at 3.0 |
| 16:57.40 | WisTilt2 | yeah wrong there also |
| 16:57.49 | Alex[sp3dev] | how come it works then |
| 16:58.21 | WisTilt2 | sdc1 is not at 0xA040000 its at 0xA030000. probably sdc1 is using sdc2's address since its off by one block |
| 16:58.30 | WisTilt2 | 0xA030000 |
| 16:58.39 | WisTilt2 | that is sdc1 phy |
| 16:58.50 | Alex[sp3dev] | are you sure you're looking at the right docs? |
| 16:59.04 | WisTilt2 | 1500 pages of 7201a yes:) |
| 16:59.12 | jonpry | yeah i think that is switched around to cause something to work |
| 16:59.26 | jonpry | like it gets the CD's confused to removal wouldn't happen |
| 16:59.34 | jonpry | s/to/so |
| 17:03.07 | *** join/#htc-linux jonpry2 (~jon@199.85.236.239) |
| 17:04.18 | jonpry | i think the only way i can brake it is with sound now |
| 17:04.59 | jonpry | spoke too soon |
| 17:05.05 | WisTilt2 | that sounds like a good thing. what all did you change? |
| 17:05.18 | jonpry | just the mdp size |
| 17:05.34 | jonpry | i think its going down whenever it tries to autosuspend |
| 17:07.01 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 17:07.48 | jonpry | whatever it is about a timeout caused sleep will destroy it |
| 17:08.42 | WisTilt2 | you mean like normal screen timeout? |
| 17:08.57 | jonpry | yeah. if you shut it down with a button its fine |
| 17:11.04 | jonpry | just got a userspace freeze on startup |
| 17:11.22 | WisTilt2 | stick a printk in pm and see what clock value you have in both conditions for acpuclk_power_collapse() |
| 17:12.00 | jonpry | it doesn't seem to get that far. there is nothing in dmesg about a request for power state |
| 17:12.01 | WisTilt2 | unless something else is changing it, both should be 528mhz as the code is right now. |
| 17:12.50 | jonpry | 3.0-rc1 won't really run on my pc |
| 17:13.31 | *** join/#htc-linux sado1 (~sado1@static.213-133-103-196.clients.your-server.de) |
| 17:15.50 | jonpry | i'm about to turn that screen timeout off and then do the music test |
| 17:16.19 | WisTilt2 | is this nand phys relevant right now? its not right either |
| 17:16.31 | jonpry | nand isn't working |
| 17:16.40 | jonpry | so that would be a cool fix |
| 17:16.40 | Alex[sp3dev] | what is the addr now? |
| 17:16.59 | WisTilt2 | addy is right but current size is 4k but it's memory space is 1M |
| 17:16.59 | jonpry | but we are getting chip id so i figured it phys was good |
| 17:17.17 | Alex[sp3dev] | it can't be that all addresses are wrong |
| 17:17.31 | WisTilt2 | addy is right, just size is wrong |
| 17:17.59 | Alex[sp3dev] | ah. i bet it ain't used anyway beyond those 4k |
| 17:18.09 | WisTilt2 | nand memory space is 0xA0A0 0000 - 0xA0AF FFFF |
| 17:18.23 | jonpry | wistilt2 i am seeing another userspace freeze |
| 17:18.42 | jonpry | could it be a low priority interrupt is storming? |
| 17:19.02 | jonpry | like keypress works. usb insert works. for that matter telnet connects |
| 17:19.15 | jonpry | but its basically frozen |
| 17:19.25 | WisTilt2 | possible. what are you doing to cause it to happen? |
| 17:19.35 | jonpry | turning it on |
| 17:19.57 | jonpry | booting |
| 17:20.24 | WisTilt2 | did you add this gpt and dgt base iomap or is this how it was? |
| 17:20.51 | jonpry | i did that |
| 17:21.13 | jonpry | cause it seems to be what our timer.c expects |
| 17:21.21 | WisTilt2 | you sure the dgt should be tmr +0x10? |
| 17:21.30 | jonpry | timers are working fine |
| 17:21.49 | jonpry | 27 timer.c redefines those anyways |
| 17:22.11 | jonpry | #undef MSM_DGT_BASE |
| 17:22.11 | jonpry | #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) |
| 17:22.31 | WisTilt2 | is .27 using csr base also? |
| 17:22.35 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 17:22.35 | WisTilt2 | for dgt |
| 17:22.50 | jonpry | should be |
| 17:23.36 | jonpry | i'm thinking this is all hw3d's fault |
| 17:24.13 | jonpry | like clamp is not being operated correctly because hw3d is supposedly not working. but i think we powered gfe on |
| 17:28.25 | WisTilt2 | im seeing hw3d resuming in dmesg and no errors pertaining to it so does that mean its up but just not being accessed or what? |
| 17:28.48 | jonpry | its up but if you look in logcat libgles_qcom is crashing |
| 17:29.07 | jonpry | so it ends up not being used or something |
| 17:29.32 | WisTilt2 | does that neocore app use hw3d? |
| 17:29.49 | *** join/#htc-linux rzk_ (~rzk@95-25-113-142.broadband.corbina.ru) |
| 17:29.50 | jonpry | no idea why its crashing. acl was hinting at it trying to access memory that was supposedly mmap'd but there being some problem with the mapping |
| 17:30.02 | jonpry | it uses whatever 3d android gives it |
| 17:30.54 | WisTilt2 | curious because i just ran neocore, not knowing what it's supposed to do, but it plays a smooth animation without crashing. |
| 17:31.20 | jonpry | you can check /proc/interrupts |
| 17:33.21 | WisTilt2 | yeah im getting tons of hw3d interrupts when playing neocore |
| 17:33.30 | jonpry | lol |
| 17:34.03 | jonpry | so i guess the only question is why libgles_qcom is blowing up on bootani |
| 17:34.41 | jonpry | although it seems plausible that the whole process is fubar. like somehow it is calling up that code while at the same time denying it an EGL context |
| 17:34.44 | stinebd | so what you're saying is that we can have either bootanim or neocore |
| 17:34.47 | WisTilt2 | this quality is very nice and smooth so i'd have to assume hw3d is working at least in this app |
| 17:34.47 | stinebd | but not both |
| 17:34.58 | jonpry | right |
| 17:35.39 | stinebd | you guys using froyo? |
| 17:35.43 | jonpry | yeah |
| 17:35.45 | WisTilt2 | frx06 here |
| 17:35.46 | stinebd | k |
| 17:35.54 | WisTilt2 | the real one not my kludged one:) |
| 17:35.57 | stinebd | neocore should be normal on that, with a working driver |
| 17:36.12 | stinebd | on gingerbread neocore has no models and all you see are lens flares from the various light sources |
| 17:37.34 | jonpry | from the sound of it. neocore is normal. just bootani is broken |
| 17:37.45 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 17:37.57 | jonpry | WisTilt2, now you have to try angry birds. nobody wants 3.0 without angry boirds |
| 17:38.06 | stinebd | also glow hockey |
| 17:38.40 | WisTilt2 | you've heard the saying, homie don't play that |
| 17:38.52 | stinebd | yeah, in the 70s |
| 17:39.38 | WisTilt2 | so bootani does require hw3d then? |
| 17:39.42 | jonpry | managed to get the sysfs explosion with hw3d disabled and mdp change |
| 17:39.55 | jonpry | nah, we can disable hw3d and bootani will work |
| 17:40.14 | stinebd | it needs working hw3d for whatever the primary driver is |
| 17:40.44 | jonpry | we have working hw3d? |
| 17:40.45 | stinebd | so if it's loading libgles_qcom and there's something wrong, it won't display anything |
| 17:41.05 | stinebd | and if it's loading libgles_android there should never be anything wrong so it'll always work |
| 17:41.18 | jonpry | yeah libgles_qcom explodes |
| 17:42.02 | jonpry | is there someway around the "system process: denying EGL context"? |
| 17:42.36 | *** join/#htc-linux ocm (~xc43m@189.152.219.207) |
| 17:42.45 | stinebd | i think that's a normal message |
| 17:43.24 | jonpry | WisTilt2, there are these funky warnings i could not get rid of from clock-wince.c |
| 17:43.46 | jonpry | looks bad. integer overflows for cpu clock settings |
| 17:44.06 | WisTilt2 | i think we need to get cpu_freq working |
| 17:44.55 | jonpry | i already did that |
| 17:44.59 | jonpry | sort of anyways |
| 17:45.04 | WisTilt2 | so we're stepping now? |
| 17:45.23 | jonpry | no, but the thing is crashing way before any governor would step it down |
| 17:46.05 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 17:47.22 | WisTilt2 | jonpry, are you still running the system.img with the tls mods? |
| 17:47.27 | jonpry | yeah |
| 17:47.50 | WisTilt2 | im not, just running standard frx06. should i be using the tls one? |
| 17:48.55 | jonpry | doesn't matter anymore |
| 17:50.32 | WisTilt2 | well, i just synced with the tree and this boot its hanging right before the unlock screen. got the top bar with battery and clock thats it. |
| 17:50.55 | WisTilt2 | microp is still running |
| 17:51.23 | WisTilt2 | usb up but no telnet |
| 17:51.24 | jonpry | yeah that happens to me a lot |
| 17:51.27 | jonpry | yep |
| 17:51.40 | WisTilt2 | so just reboot until it works? |
| 17:52.27 | WisTilt2 | stinebd do we need to make a new data.img anymore as long as the system.img is signed? |
| 17:52.28 | jonpry | i have good luck with plugging in usb after after the sound rpc stuff and then unplugging it after the device settles |
| 17:52.42 | stinebd | WisTilt2: sometimes in worst case scenario |
| 17:53.49 | WisTilt2 | jonpry so right after the snd endpoints are done usb is good to go? |
| 17:54.30 | jonpry | shortly after jump to init.android |
| 17:55.21 | WisTilt2 | nice, i have been waiting until it fully came up. i got telnet right after the snd endpoint that time and it is crashing right after opening hw3d with this-> Unhandled fault: external abort on non-linefetch (0x008) at 0x417ac000 |
| 17:55.31 | WisTilt2 | then hw3d release |
| 17:55.45 | WisTilt2 | but device did not lock that time and i have service now |
| 17:56.05 | Alex[sp3dev] | which would typically mean your vm mapping is wrong |
| 17:56.15 | Alex[sp3dev] | like, a missing io map entry |
| 17:56.27 | WisTilt2 | yeah thats where the problem is for sure. getting vm allocation errors also |
| 17:56.35 | WisTilt2 | unable to alloc vm |
| 17:56.42 | Alex[sp3dev] | or a null pointer.. the stack trace will tell the location of function if you enabled all debug |
| 17:59.25 | WisTilt2 | jonpry, what is causing this: phys_mem_access_prot_i: did not set access prot: 0, 1, 0 |
| 17:59.40 | WisTilt2 | something in pmem |
| 17:59.54 | jonpry | its debugging code in driver/staging/dream/pmem.c |
| 18:00.25 | jonpry | need to check it against behavior on 27 but my theory is that the pagetable is not being setup the same as it is on 27 |
| 18:03.08 | jonpry | i haven't been able to get it to boot for the last 4 tries now |
| 18:03.53 | WisTilt2 | this boot its actually working pretty good so far |
| 18:04.55 | WisTilt2 | this fb is so much quicker. dont appreciate it until you go back to the normal one |
| 18:15.44 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 18:17.09 | jonpry | WisTilt2, so scaling is actually working now. whatever good it is |
| 18:18.29 | WisTilt2 | im messing with some iomapping for kicks. i have to leave here shortly though and wont be back on again until this evening. |
| 18:19.03 | *** join/#htc-linux ShapaTank_ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 18:19.32 | emwe | WisTilt2: leave the docs up somewhere ;) |
| 18:20.11 | WisTilt2 | wish i could. tiptoeing around what im doing as it is |
| 18:23.56 | jonpry | i can't install angry birds |
| 18:24.12 | Alex[sp3dev] | don't |
| 18:24.19 | Alex[sp3dev] | install impossible game |
| 18:24.28 | jonpry | i like that game |
| 18:24.37 | Alex[sp3dev] | impossible or birds? |
| 18:24.47 | jonpry | hmm |
| 18:25.35 | jonpry | is any of this important: E/Vold ( 1320): Error opening devmapper (No such file or directory) |
| 18:25.36 | jonpry | E/Vold ( 1320): ASEC device mapping failed (No such file or directory) |
| 18:25.36 | jonpry | E/PackageHelper( 2011): Failed to create secure container smdl2tmp1 |
| 18:25.36 | jonpry | E/DefContainer( 2011): Failed to create container smdl2tmp1 |
| 18:26.14 | Alex[sp3dev] | not really. but looks like you need to enable dev mapper in kernel |
| 18:30.00 | jonpry | what is dev mapper? |
| 18:30.28 | Alex[sp3dev] | a thing that handles virtual block devices, lvm, cryptoloop and stuff like that |
| 18:30.46 | jonpry | i don't see any CONFIG_DEV_MAPPER |
| 18:31.24 | *** join/#htc-linux helicopter88 (~kvirc@host46-116-dynamic.13-79-r.retail.telecomitalia.it) |
| 18:31.26 | Alex[sp3dev] | CONFIG_BLK_DEV_BM probably |
| 18:31.36 | Alex[sp3dev] | s/BM/DM/ |
| 18:32.00 | jonpry | thanks |
| 18:44.05 | *** join/#htc-linux ShapaTank__ (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 18:52.45 | *** join/#htc-linux ShapaTank (~ShapaTank@cpe-24-24-202-60.socal.res.rr.com) |
| 18:55.12 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 18:56.08 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-71-25.26-151.libero.it) |
| 19:05.14 | *** join/#htc-linux arif-ali (~arif-ali@88-111-115-149.dynamic.dsl.as9105.com) |
| 19:18.08 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-vtnzkkizufwqbkkl) |
| 19:32.00 | *** join/#htc-linux balans (~barry@82-170-217-205.ip.telfort.nl) |
| 19:33.03 | *** join/#htc-linux Nautis (6318de85@gateway/web/freenode/ip.99.24.222.133) |
| 19:34.13 | *** join/#htc-linux lxsameer (~lxsameer@unaffiliated/lxsameer) |
| 19:37.30 | *** join/#htc-linux rob_w (~bob@ppp-188-174-99-237.dynamic.mnet-online.de) |
| 19:42.22 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 20:07.41 | *** join/#htc-linux balans2 (~Gebruiker@82-170-217-205.ip.telfort.nl) |
| 20:12.12 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 20:14.22 | *** join/#htc-linux mes (~mes@S0106000ce55186df.cc.shawcable.net) |
| 20:38.53 | *** join/#htc-linux rzk_ (~rzk@95-24-248-88.broadband.corbina.ru) |
| 21:03.24 | *** join/#htc-linux vw_ (4463ed13@gateway/web/freenode/ip.68.99.237.19) |
| 21:13.21 | *** join/#htc-linux mastermerlin (~Adium@p4FEE48CE.dip.t-dialin.net) |
| 21:33.42 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 21:34.03 | *** join/#htc-linux ocm (~xc43m@189.152.104.208) |
| 21:35.07 | *** join/#htc-linux raymonddull (~raymonddu@24-236-171-67.dhcp.monr.mi.charter.com) |
| 22:27.11 | *** join/#htc-linux xabrx (~aesoprock@newelite.bshellz.net) |
| 22:27.23 | xabrx | Hi, is there anybody here from norway that use Telenor as a oprator? |
| 22:28.16 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 22:29.21 | xabrx | can't get my damn MMS to work with my HTC Desire. Any ideas? Error message: generic network failure |
| 22:33.47 | raymonddull | sounds like you don't have the mms settings typed in |
| 22:34.16 | raymonddull | go to settings>wireless and networks>mobile networks>apn settings>pick your network>fill in the boxes for mms setttings |
| 22:34.39 | xabrx | jepp, done that |
| 22:35.24 | raymonddull | hmm,I have no idea,the only time I get that message is when i dont have signal, or if I'm on wifi |
| 22:35.35 | raymonddull | it will fail to send if you're connected to wifi |
| 22:35.47 | xabrx | Ok, so you must disable wifi to get MMS to work ? |
| 22:36.07 | xabrx | haven't tried that |
| 22:36.14 | rpierce99 | certain providers don't allow access to their mmsc unless you are on their mobile netwokr |
| 22:36.35 | rpierce99 | others require you to access the mmsc through a proxy server |
| 22:37.09 | xabrx | ok, thanks. yeah got the proxy |
| 22:37.20 | raymonddull | still try without wifi though |
| 22:38.32 | xabrx | I just disabled wifi and tried sending again. Waiting... |
| 22:42.09 | xabrx | nope didn't work. Am I supposed to have a white circle with a green dot beside the MMS setting? |
| 22:42.34 | xabrx | Im using Sense |
| 22:43.49 | raymonddull | umm,they're not all in 1 apn? |
| 22:44.02 | xabrx | nope |
| 22:44.16 | raymonddull | hmm,take the settings from the mms apn and merge them into the data apn |
| 22:44.22 | raymonddull | and set that one as active |
| 22:44.28 | xabrx | aha :) |
| 22:44.34 | xabrx | will try that one |
| 22:48.19 | *** join/#htc-linux ocm (~xc43m@189.152.42.231) |
| 23:06.45 | *** join/#htc-linux jonpry (~jon@199.85.236.239) |
| 23:11.55 | *** join/#htc-linux vw_ (4463ed13@gateway/web/freenode/ip.68.99.237.19) |
| 23:30.05 | *** join/#htc-linux FlawlesStyle (~LOL@unaffiliated/flawlesstyle) |
| 23:31.24 | *** join/#htc-linux leviathan (~quassel@2001:470:26:484:6ef0:49ff:fee6:8dca) |