| 00:01.28 | hyc | Yeah actually now the only thing I think that matters for new rootfs detection is the keymaps |
| 00:02.04 | hyc | I was going to check atimestamp there instead. but I guess just having an explicit version stamp might be more reliable ..... |
| 00:08.34 | *** join/#htc-linux rajkosto (~rajkosto@2001:5c0:1511:4e01:cd98:7066:1e67:bd53) |
| 00:13.43 | *** join/#htc-linux jonpry (~jon@199.85.236.239) |
| 00:16.01 | *** join/#htc-linux mitsutaka (~mitsutaka@rt.miraclelinux.com) |
| 00:18.57 | WisTilt2 | jonpry: you sure you're not seeing any ramzswap issues on boot? its still crashing right after swapon because the dev/block/ramzswap0 doesn't exist. |
| 00:19.25 | WisTilt2 | after that it starts the write errors since theres no space left on device |
| 00:22.46 | *** join/#htc-linux jonpry (~jon@199.85.236.239) |
| 00:23.50 | hyc | probably a good idea to turn that stuff off for now |
| 00:25.07 | WisTilt2 | i have it off i thought but it's still there. dont know how jonpry disabled it. |
| 00:25.29 | WisTilt2 | my eyes must be playing tricks on me looking at this too long |
| 00:26.00 | hyc | if it's a module, you can always remove it and prevent it loading... |
| 00:26.22 | WisTilt2 | jonpry: what other than compcache did you disable in config to shut off ramzswap? |
| 00:27.54 | WisTilt2 | hmm, actually that might be the problem. it is a module and now its not being built but still trying to load. swapon still trying to mount something not there. |
| 00:28.52 | hyc | ah. that's commented out in our userinit.sh |
| 00:28.57 | hyc | seems like you have a different one |
| 00:29.15 | WisTilt2 | jonpry's .39 tree |
| 00:29.40 | hyc | the swapon command is somewhere in rootfs, not kernel |
| 00:30.23 | hyc | kernel never enables swap on its own |
| 00:30.29 | WisTilt2 | yeah but the ramzswap.ko is what is trying to load and swapon doesn't know its not there |
| 00:40.03 | jonpry | just compcache. i'm working on touchscreen now. i'll bbl |
| 00:44.56 | *** join/#htc-linux surge (surge@pool-98-118-157-221.bflony.fios.verizon.net) |
| 00:52.44 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-20-63-176.client.mchsi.com) |
| 01:04.30 | *** join/#htc-linux arif-ali (~arif-ali@genld-217-002.t-mobile.co.uk) |
| 01:04.53 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 01:18.38 | *** join/#htc-linux rajkosto (~rajkosto@2001:5c0:1511:4e01:cd98:7066:1e67:bd53) |
| 01:44.15 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
| 01:48.55 | *** join/#htc-linux D3tul3 (~D3tul3@cpe-174-109-223-235.nc.res.rr.com) |
| 01:53.07 | *** part/#htc-linux D3tul3 (~D3tul3@cpe-174-109-223-235.nc.res.rr.com) |
| 02:15.34 | *** join/#htc-linux D3tul3 (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 02:24.29 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 02:31.49 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
| 02:33.17 | WisTilt2 | jonpry: compcache disabled in config didn't shut it down for whatever reason. check your boot screen and see if you indeed have no ramzswap showing up anywhere. im working out the mddi issue for the next hour or so. |
| 02:37.57 | *** join/#htc-linux bukington (~bukington@fac34-2-82-228-151-145.fbx.proxad.net) |
| 02:38.11 | *** join/#htc-linux jon__ (~jon@184.171.165.88) |
| 02:42.49 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 02:45.32 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 02:45.35 | *** join/#htc-linux LargePrime (~LargePrim@108.99.6.234) |
| 02:50.55 | WisTilt2 | stinebd: new raph test kernel ready whenever you want to give it a shot. same name. hopefully we see some graphics this go around. |
| 02:51.19 | jonpry | hi WisTilt2 |
| 02:51.39 | WisTilt2 | hey jonpry, man this mddi issue is a real pain |
| 02:51.59 | jonpry | oh yeah |
| 02:53.24 | WisTilt2 | did you catch my msg earlier? |
| 02:53.44 | jonpry | about compcache? |
| 02:53.47 | WisTilt2 | yeah |
| 02:54.00 | WisTilt2 | you're not seeing ramzswap at all? |
| 02:54.01 | jonpry | i just disabled compcache |
| 02:54.07 | *** join/#htc-linux raymonddull (raymonddul@pool-70-20-67-189.pitbpa.east.verizon.net) |
| 02:54.22 | jonpry | i'm about to pull a dmesg |
| 02:54.49 | jonpry | but there is definitely only one section error |
| 02:55.00 | WisTilt2 | see if swapon tries to setup the dev/block/ramzswap0 |
| 02:55.22 | jonpry | i'm not really worried about mddi probe. but i don't really understand it |
| 02:55.24 | WisTilt2 | yeah, im not getting that section error now but even with compcache disabled ramzswap still trying to load |
| 02:55.54 | jonpry | msmfb uses gpio ints right? so if fb is working there is no way they are broken yeah? |
| 02:56.41 | WisTilt2 | i think we might need to tweak pmem. almost acts like something is overlapping |
| 02:56.46 | hyc | swapon stuff is done in /bin/userinit.sh on our rootfs |
| 02:57.00 | hyc | have you tried tweaking that? |
| 02:57.18 | jonpry | WisTilt2, pmem is not really on |
| 02:57.28 | WisTilt2 | userinit.sh is being called but there is no dev/blah blah for it to map |
| 02:58.30 | hyc | i meant, just comment all of that part out, bypass it |
| 02:59.05 | WisTilt2 | hyc you mean so it doesn't run at all? |
| 02:59.32 | hyc | so it doesn't run those compcache setup routines, yeah |
| 03:00.02 | WisTilt2 | jonpry pmem is on, without it fb and ramconsole would work? |
| 03:00.19 | jonpry | ramconsole is kind of hard wired |
| 03:00.35 | WisTilt2 | yeah but fb gets its memory alloc from pmem |
| 03:00.38 | jonpry | fb is setup via pmem. but no other ram devices are running |
| 03:01.13 | jonpry | and fb is way out in a huge gaping hole. so i don't know what kind of overlap there could be |
| 03:02.10 | jonpry | i just got a useless ram console, fun |
| 03:06.23 | *** join/#htc-linux Rob2223 (~Miranda@p4FFF3B46.dip.t-dialin.net) |
| 03:09.53 | jonpry | WisTilt2, are you having as much trouble reading the init as i am? |
| 03:09.58 | *** join/#htc-linux Rajko (~rajkosto@2001:5c0:1511:4e01:cd98:7066:1e67:bd53) |
| 03:11.12 | *** join/#htc-linux LargePrime_ (~LargePrim@173-106-27-197.pools.spcsdns.net) |
| 03:12.38 | WisTilt2 | jonpry, what do you mean? |
| 03:12.54 | jonpry | stuff scrolls by too fast |
| 03:13.00 | jonpry | no logs |
| 03:13.27 | WisTilt2 | yeah goes by pretty fast. |
| 03:14.08 | jonpry | make a new init that does init.old 2>> log 1>>log ? |
| 03:16.25 | WisTilt2 | or get it to boot all the way up so we can see dmesg:) |
| 03:16.43 | jonpry | i get dmesg from ram console |
| 03:17.10 | WisTilt2 | was that kernel panic happening right after mddi for further down? |
| 03:17.10 | jonpry | is mmcblk0: p1 p2 p3 p4 the last line in dmesg? |
| 03:17.33 | jonpry | the killed init pani? |
| 03:17.49 | WisTilt2 | yeah had mddi run right before that? |
| 03:18.02 | jonpry | no i don't think so |
| 03:18.44 | jonpry | why would init.android cause mddi_probe? |
| 03:18.52 | WisTilt2 | my last line is the no space left, right before that was all the dbgfs stuff |
| 03:19.25 | jonpry | yeah i don't get anything like that |
| 03:19.40 | WisTilt2 | mddi_probe actually comes much later you're right |
| 03:19.57 | jonpry | or earlier |
| 03:20.33 | jonpry | should i post what i have built? |
| 03:20.57 | WisTilt2 | yeah then i'll see if im stopping in same place as you are now. |
| 03:22.14 | jonpry | i'm really tempted to go for rhobuntu :p |
| 03:22.53 | jonpry | i got touchscreen klt, ksc setup now |
| 03:23.17 | jonpry | http://prymfg.com/kernel/zimage_39 |
| 03:26.58 | jonpry | WisTilt2, latest dmesg. http://pastebin.com/QBtUgPN5 |
| 03:28.35 | WisTilt2 | damn, forgot to remove scbs rootfs and got segmentation fault. rebooting again... |
| 03:29.21 | jonpry | yeah i am still seeing segault with scbs not being called |
| 03:29.59 | WisTilt2 | saw some output where scbs was trying to access /dev/scbs0 I think or similar |
| 03:30.09 | jonpry | call to mknod |
| 03:32.23 | WisTilt2 | died in exact same place, no space left on device. still seeing the ramzswap also |
| 03:32.48 | WisTilt2 | last line before error was saved touchscreen calibration |
| 03:33.00 | jonpry | so strange |
| 03:33.16 | WisTilt2 | what rootfs you using? |
| 03:33.40 | jonpry | scbs with exec /bin/sh at end |
| 03:34.00 | WisTilt2 | i switched to my normal one which is F22's |
| 03:35.19 | jonpry | stale zimage? |
| 03:35.54 | WisTilt2 | booted your zImage |
| 03:36.10 | jonpry | sure? |
| 03:36.37 | WisTilt2 | yep. move my previous into root of sdcard |
| 03:37.01 | WisTilt2 | are you only booting up to that last line in your dmesg? |
| 03:37.27 | jonpry | thats just the last thing in dmesg, everything else is to console |
| 03:37.35 | jonpry | stdout |
| 03:37.52 | jonpry | i get to end of init script in rootfs |
| 03:37.57 | WisTilt2 | ok i was going to say. im getting up to the touchscreen calib at around 15 seconds ktime |
| 03:38.14 | jonpry | yeah i am dropped to sheel at like 45 |
| 03:38.43 | jonpry | its hard to see because i removed nasty mdp |
| 03:39.23 | jonpry | there are a variety of long pauses in my boot |
| 03:39.56 | jonpry | maybe you need a different card. mmc is at 50mhz |
| 03:40.42 | WisTilt2 | i can try my old 2gb card tomorrow at the office. this one is 8gb class 4 |
| 03:41.08 | jonpry | or maybe slow it down |
| 03:48.08 | jonpry | WisTilt2, drivers/mmc/host/msm_sdcc, ln 55, 24576000 |
| 03:49.38 | WisTilt2 | should i try slowing it down? |
| 03:49.53 | jonpry | yeah thats how you do it :p |
| 03:50.37 | WisTilt2 | got that:) do you think its going to help? |
| 03:50.54 | jonpry | good chance |
| 03:51.38 | WisTilt2 | ok give me a few and we'll see if it gets any further |
| 03:52.56 | jonpry | touchscreen is working. but i'm still getting nothing form keypad or gpio keys |
| 03:53.22 | WisTilt2 | did you turn on keypad power? |
| 03:53.27 | WisTilt2 | gpio |
| 03:53.38 | jonpry | how do i do that? |
| 03:53.57 | WisTilt2 | let me get this change made and ill look up the gpio for power |
| 04:00.26 | *** join/#htc-linux LargePrime (~LargePrim@184-204-134-151.pools.spcsdns.net) |
| 04:01.03 | WisTilt2 | jonpry: same exact place, no space. |
| 04:01.25 | jonpry | delete data.img? |
| 04:01.41 | WisTilt2 | yeah will try that. |
| 04:01.42 | jonpry | df, maybe there really is no space? |
| 04:03.32 | *** join/#htc-linux Curious_ (8bb3cf94@gateway/web/freenode/ip.139.179.207.148) |
| 04:04.26 | WisTilt2 | 6.9gb free |
| 04:05.19 | WisTilt2 | i dont think it's even getting to where data.img is used though is it? |
| 04:06.56 | WisTilt2 | guess it is, making new data store at 8.2 seconds |
| 04:07.03 | *** join/#htc-linux hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) |
| 04:09.05 | jonpry | yeah i think it gets that far |
| 04:09.15 | WisTilt2 | jonpry, died same place. i did see it detected gsm rhodium and some other things while it froze scrolling. still no space left after the touchscreen calib. |
| 04:09.31 | jonpry | hrm |
| 04:09.47 | jonpry | new kernel has touch screen driver, think that would help? |
| 04:10.17 | jonpry | my setup has previously booted a .27, is yours more virgin that that? |
| 04:10.20 | WisTilt2 | what looks like is happening is this ramzswap is trying to create a diskswap of 76800 and cant. |
| 04:10.42 | jonpry | thats not really possible. ramzswap is non built in |
| 04:12.24 | WisTilt2 | its dying in init trying to create /sys/devices etc. |
| 04:13.18 | WisTilt2 | several cant create errors all in /sys/devices. probably due to the no space left problem. |
| 04:14.40 | WisTilt2 | i'll mess with this tomorrow. i need to get out of here for the night. we'll get it |
| 04:49.23 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 04:50.14 | *** join/#htc-linux vw (ad08b72d@gateway/web/freenode/ip.173.8.183.45) |
| 04:56.26 | *** join/#htc-linux avinashhm (~avinash-h@192.91.66.186) |
| 05:17.18 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@94.52.236.39) |
| 05:20.02 | *** join/#htc-linux XirXes (~xirxes@71-35-197-137.slkc.qwest.net) |
| 05:24.20 | *** join/#htc-linux avinashhm (~avinash-h@192.91.66.186) |
| 05:45.24 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 05:48.20 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 05:56.35 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 05:57.07 | *** join/#htc-linux MacDrunk (~marper@201.164.176.184) |
| 05:59.18 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:03.07 | *** join/#htc-linux kiozen (~kiozen@p5791FE43.dip.t-dialin.net) |
| 06:03.32 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:03.43 | *** part/#htc-linux kiozen (~kiozen@p5791FE43.dip.t-dialin.net) |
| 06:05.53 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:11.45 | *** join/#htc-linux rajkosto (~rajkosto@2001:5c0:1511:4e01:cd98:7066:1e67:bd53) |
| 06:16.11 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:16.21 | *** join/#htc-linux LTxda (~anon@c-98-194-107-10.hsd1.tx.comcast.net) |
| 06:18.31 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:19.51 | *** join/#htc-linux gassed (gassed@c-76-30-161-228.hsd1.tx.comcast.net) |
| 06:22.05 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 06:56.41 | *** join/#htc-linux DuperMan (~Duper@109-186-103-12.bb.netvision.net.il) |
| 07:03.03 | *** join/#htc-linux avinashhm (~avinash-h@192.94.92.14) |
| 07:14.50 | *** join/#htc-linux surgex (surge@pool-98-118-157-221.bflony.fios.verizon.net) |
| 07:17.43 | *** join/#htc-linux gauner1986 (~Miranda@46.115.2.17) |
| 07:25.51 | *** join/#htc-linux rob_w (~bob@ppp-188-174-98-239.dynamic.mnet-online.de) |
| 07:29.21 | *** join/#htc-linux rob_w (~bob@ppp-188-174-98-239.dynamic.mnet-online.de) |
| 07:59.32 | *** join/#htc-linux Rajko (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 08:06.18 | *** join/#htc-linux Alex[sp3dev] (~AndChat@82.179.218.11) |
| 08:16.20 | *** join/#htc-linux Rob2222 (~Miranda@p4FFF3B46.dip.t-dialin.net) |
| 08:16.26 | *** join/#htc-linux gauner1986 (~Miranda@p5B382130.dip.t-dialin.net) |
| 08:49.49 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
| 08:57.35 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 08:57.55 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 09:07.22 | *** join/#htc-linux DuperGhost (~Duper@93-173-172-124.bb.netvision.net.il) |
| 09:18.13 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
| 09:21.02 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 09:26.51 | *** join/#htc-linux DuperMan (~Duper@93-173-175-172.bb.netvision.net.il) |
| 09:28.58 | *** join/#htc-linux |lippa| (~lippa@ppp118-209-6-120.lns20.mel4.internode.on.net) |
| 09:47.00 | *** join/#htc-linux |Atom| (~atom@82.194.234.249) |
| 09:50.07 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host29-10-dynamic.54-79-r.retail.telecomitalia.it) |
| 09:52.24 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-133-138.98-62.inwind.it) |
| 09:53.09 | *** join/#htc-linux mickey|office (~Mickey@business-092-079-168-007.static.arcor-ip.net) |
| 10:09.17 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-166-52.netcologne.de) |
| 10:32.07 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
| 10:42.59 | fakker | ?????? |
| 10:43.15 | fakker | ëîëøòî |
| 10:45.54 | gauner1986 | hullu |
| 11:05.07 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 11:05.24 | *** join/#htc-linux D3tul3 (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 11:07.46 | hyc | so how does display rotation work anyway. does the driver remap the frame buffer? (On OMAP the display controller is simply told to rotate, and it alters its scan of the framebuffer) |
| 11:08.27 | hyc | When rotation occurs in Gallery3D with qualcomm libegl, the screen is garbled. |
| 11:09.40 | hyc | given the interleaved appearance of the screen, it seems that the framebuffer itself may have been rotated, but the display controller was not informed. |
| 11:09.46 | hyc | or something else. dunno. |
| 11:15.33 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 11:16.40 | *** join/#htc-linux DuperGhost (~Duper@46-116-91-187.bb.netvision.net.il) |
| 11:18.10 | *** join/#htc-linux LargePrime (~LargePrim@184-204-134-151.pools.spcsdns.net) |
| 11:27.33 | *** join/#htc-linux DuperMan (~Duper@46-116-91-187.bb.netvision.net.il) |
| 11:46.32 | *** join/#htc-linux Rajko (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 12:15.06 | *** join/#htc-linux helicopter88 (~helicopte@host58-116-dynamic.8-79-r.retail.telecomitalia.it) |
| 12:53.36 | *** join/#htc-linux rajkosto (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 12:56.16 | *** join/#htc-linux ddd (5d2d411c@gateway/web/freenode/ip.93.45.65.28) |
| 13:25.41 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 13:49.15 | *** join/#htc-linux rzk_ (~rzk@95-25-211-53.broadband.corbina.ru) |
| 14:09.58 | *** join/#htc-linux helicopter88 (~helicopte@host58-116-dynamic.8-79-r.retail.telecomitalia.it) |
| 14:18.46 | *** join/#htc-linux gauner1986 (~Miranda@p5B382130.dip.t-dialin.net) |
| 14:29.29 | *** join/#htc-linux emwe (~emwe@cable-86-56-10-158.cust.telecolumbus.net) |
| 14:32.40 | jonpry | any rhobuntu users here? |
| 14:37.45 | *** join/#htc-linux helicopter88 (~helicopte@host50-123-dynamic.183-80-r.retail.telecomitalia.it) |
| 14:37.56 | *** join/#htc-linux Markinus (~Adium@212.255.43.60) |
| 14:52.44 | *** join/#htc-linux ornll (~ornll@bzq-79-179-36-219.red.bezeqint.net) |
| 15:09.02 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 15:10.53 | *** join/#htc-linux Cotulla (~opera@nat004-252-205-109.tvoe.tv) |
| 15:20.15 | *** join/#htc-linux csy7550 (csy7550@144.84-48-193.nextgentel.com) |
| 15:21.42 | *** join/#htc-linux onen|openBmap (~quassel@vbo91-1-89-87-201-85.dsl.sta.abo.bbox.fr) |
| 15:29.51 | *** join/#htc-linux helicopter88 (~helicopte@host50-123-dynamic.183-80-r.retail.telecomitalia.it) |
| 15:35.45 | *** join/#htc-linux D3tul3 (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 15:51.38 | *** join/#htc-linux crawling (~crawling@a94-132-161-104.cpe.netcabo.pt) |
| 16:01.31 | *** join/#htc-linux Rajko (~rajkosto@wan.rajkonet.info) |
| 16:05.38 | *** join/#htc-linux rob_w (~bob@ppp-188-174-98-239.dynamic.mnet-online.de) |
| 16:07.05 | *** join/#htc-linux gauner1986 (~Miranda@88.128.88.219) |
| 16:10.22 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-166-52.netcologne.de) |
| 16:14.23 | *** join/#htc-linux gauner19861 (~Miranda@46.115.20.251) |
| 16:14.51 | *** join/#htc-linux rajkosto (~rajkosto@178.32.95.99) |
| 16:18.12 | *** join/#htc-linux Rajko (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 16:19.15 | *** join/#htc-linux bitrot (~rajkosto@wan.rajkonet.info) |
| 16:20.44 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-166-52.netcologne.de) |
| 16:23.41 | *** join/#htc-linux rajkosto (~rajkosto@2001:5c0:1511:4e01:d5b2:ccb4:4315:4411) |
| 16:23.50 | *** join/#htc-linux programmer8922 (~Evan@156.110.78.2) |
| 16:37.49 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless251.wirelesstcp.net) |
| 16:37.52 | *** join/#htc-linux helicopter88 (~helicopte@host50-123-dynamic.183-80-r.retail.telecomitalia.it) |
| 16:39.34 | *** join/#htc-linux mes (~mes@sentry.lazo.ca) |
| 16:39.59 | *** join/#htc-linux GlemSom (~glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 16:45.50 | *** join/#htc-linux gregtampa (4b95f48d@gateway/web/freenode/ip.75.149.244.141) |
| 17:02.56 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 17:03.13 | *** join/#htc-linux helicopter88|2 (~helicopte@host247-18-dynamic.17-79-r.retail.telecomitalia.it) |
| 17:08.03 | gregtampa | This version of launcher pro has expired ....... |
| 17:08.37 | gregtampa | error happens everytime |
| 17:08.43 | gregtampa | how can i update i cant get to settings. |
| 17:08.50 | gregtampa | anyone want to help me get this running? |
| 17:08.59 | helicopter88 | what phone,what build? |
| 17:09.07 | gregtampa | road400 |
| 17:09.12 | gregtampa | aka touch pro 2 |
| 17:09.21 | helicopter88 | that's not the proper channel,join in #xdandroid to get help |
| 17:09.31 | gregtampa | there stupid site took me here sorry |
| 17:09.41 | helicopter88 | never mind |
| 17:09.54 | helicopter88 | that's kernel and other things channel |
| 17:16.04 | Willd | gregtampa: I'd head for #android |
| 17:17.04 | WisTilt2 | jonpry: when you get in here, what initrd offset are you using you mentioned yesterday? I'm not getting the ramzswap problem anymore but still hanging at the no space left on device. |
| 17:18.01 | *** join/#htc-linux Andreyxxl[HD2EU] (Andreyxxl@94.52.236.39) |
| 17:20.00 | *** join/#htc-linux paulk (~paulk@lib33-1-82-233-88-171.fbx.proxad.net) |
| 17:20.05 | paulk | hello |
| 17:22.43 | *** join/#htc-linux gauner1986 (~Miranda@p5B382130.dip.t-dialin.net) |
| 17:24.26 | paulk | I guess that I found out how htc-acoustic writes the CSV values in shared memory, using mmap on /dev/htc-acoustic with a size of 0xd000 (does it seems coherent?) |
| 17:24.41 | *** join/#htc-linux infernix (nix@unaffiliated/infernix) |
| 17:25.14 | paulk | I found out the correct size and start address it uses, so I'd like to dump the data from the pointer mmap gives me |
| 17:25.23 | paulk | but I have no idea about how to do it |
| 17:25.32 | paulk | (I never worked with such things before) |
| 17:28.11 | *** join/#htc-linux programmer8922 (~Evan@156.110.78.2) |
| 17:32.42 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host29-10-dynamic.54-79-r.retail.telecomitalia.it) |
| 17:39.31 | *** join/#htc-linux Cotulla (~opera@nat004-252-205-109.tvoe.tv) |
| 17:51.57 | *** join/#htc-linux programmer8922 (~Evan@156.110.78.2) |
| 17:53.42 | *** join/#htc-linux programmer8922 (~Evan@156.110.78.2) |
| 17:57.20 | jonpry | hi WisTilt2 |
| 17:58.03 | Cotulla | hey |
| 17:58.08 | WisTilt2 | hey jonpry. so? |
| 17:58.47 | gauner1986 | hi |
| 17:58.53 | jonpry | 6MB + 0x8000 |
| 17:59.04 | jonpry | or 0. kernel is not big enough yet to require new offset |
| 17:59.58 | WisTilt2 | you think that might be why im getting this no space problem? ramzswap wasn't the problem and it's gone now. |
| 18:00.03 | jonpry | i tried running rhobuntu. it seems to work fine except that Loading hardware drivers never completes. I'm not sure what its actually doing at that stage |
| 18:00.12 | WisTilt2 | got same thing on my other sd card also |
| 18:00.33 | jonpry | i dunno. i'm not having any problem like that |
| 18:01.12 | jonpry | maybe it thinks your card is read only? |
| 18:03.10 | WisTilt2 | hmm, thats possible. is your's fat32 or what? |
| 18:03.35 | jonpry | i've run both loopback ext2 and nilfs partition with it |
| 18:04.09 | WisTilt2 | ok i'll have to check out read only, that kind of makes sense from what its doing. |
| 18:04.18 | WisTilt2 | right now i'm redoing my PM patch for .27 so it can be pushed. tired of people complaining to me about quick wakes, sod's etc, in the autobuild and that and the fb patch is the only thing thats going to fix it. |
| 18:04.18 | jonpry | your dmesg should say what msm_sdcc decided to do about write protect |
| 18:04.27 | *** join/#htc-linux mes (~mes@S0106000ce55186df.cc.shawcable.net) |
| 18:04.49 | jonpry | i got got touchscreen working. but any sort of gpio interrupt seems to not be working |
| 18:05.08 | *** join/#htc-linux jozefk (~jozefk@unaffiliated/jozefk) |
| 18:05.14 | WisTilt2 | i need to get you the power gpio for keypad and buttons, that should make irq work |
| 18:05.49 | WisTilt2 | i'll be another 30mins or so on this pm patch then i'll get that info to you to try. |
| 18:06.20 | jonpry | WisTilt2, why would that not be on already? why does the same code work on 35? |
| 18:06.50 | WisTilt2 | you may not have copies the souce that contains that power enable code? |
| 18:06.57 | WisTilt2 | copied* |
| 18:07.24 | WisTilt2 | i forget exactly where it is so need to look through my code |
| 18:12.25 | *** join/#htc-linux gregtampa (4b95f48d@gateway/web/freenode/ip.75.149.244.141) |
| 18:18.49 | *** join/#htc-linux rob_w (~bob@ppp-188-174-98-239.dynamic.mnet-online.de) |
| 18:27.32 | *** join/#htc-linux Alex[sp3dev] (~alexander@86.110.163.19) |
| 18:48.51 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-vtpagzkjwrwopyrn) |
| 18:58.07 | *** join/#htc-linux Rajko (~rajkosto@2001:5c0:1511:4e01:d5b2:ccb4:4315:4411) |
| 19:00.04 | *** join/#htc-linux crawling (~crawling@a94-132-161-104.cpe.netcabo.pt) |
| 19:03.30 | *** part/#htc-linux jozefk (~jozefk@unaffiliated/jozefk) |
| 19:09.50 | *** join/#htc-linux JesusFreak316 (~JesusFrea@pool-173-65-73-241.tampfl.fios.verizon.net) |
| 19:14.26 | *** join/#htc-linux vw (ad08b72d@gateway/web/freenode/ip.173.8.183.45) |
| 19:16.50 | WisTilt2 | emwe: you around? |
| 19:17.56 | *** join/#htc-linux dan1j3l (~danijel@93-141-33-114.adsl.net.t-com.hr) |
| 19:20.50 | *** join/#htc-linux helicopter88 (~helicopte@host247-18-dynamic.17-79-r.retail.telecomitalia.it) |
| 19:39.40 | *** join/#htc-linux Rajko (~rajkosto@2001:5c0:1511:4e01:d5b2:ccb4:4315:4411) |
| 19:47.11 | *** join/#htc-linux gauner1986 (~Adium@p5B382130.dip.t-dialin.net) |
| 19:47.36 | emwe | WisTilt2: re. |
| 19:50.35 | *** join/#htc-linux helicopter88 (~helicopte@host247-18-dynamic.17-79-r.retail.telecomitalia.it) |
| 19:52.12 | *** join/#htc-linux ORi| (~ORi@91.181.60.131) |
| 19:57.43 | *** join/#htc-linux mastermerlin (~Adium@p4FEE5FC2.dip.t-dialin.net) |
| 19:57.55 | *** join/#htc-linux khorben_ (~dont@APuteaux-651-1-104-205.w82-124.abo.wanadoo.fr) |
| 19:58.39 | *** join/#htc-linux vinceweis (ad08b72d@gateway/web/freenode/ip.173.8.183.45) |
| 20:02.04 | WisTilt2 | emwe: was at lunch. you know anyone having compile issues after that tpa2016 series of commits? |
| 20:02.40 | emwe | WisTilt2: the autobuild builds. me too. all fine i'd say. |
| 20:03.17 | WisTilt2 | linux-msm/arch/arm/mach-msm/board-htcrhodium-audio.c:42: undefined reference to `tpa2016d2_read_register' |
| 20:03.23 | WisTilt2 | lots of these |
| 20:03.41 | WisTilt2 | I re-cloned and still same thing |
| 20:03.45 | emwe | did you reconfig? |
| 20:03.52 | WisTilt2 | yes |
| 20:03.53 | emwe | tpa has kconfig option |
| 20:03.55 | emwe | hm |
| 20:05.04 | emwe | so CONFIG_AMP_TPA2016D2=y set on your .config, yes? |
| 20:05.08 | emwe | just to make sure. |
| 20:05.43 | WisTilt2 | yes just checked to be sure. i copied over the current htc_msm_android_defconfig. |
| 20:06.23 | Cotulla | WisTilt2, without amplifier power sound won't appear from speaker, right? |
| 20:06.52 | WisTilt2 | Cotulla: yes, you need gpio 0x54 (i think thats it) has to be on |
| 20:07.34 | emwe | WisTilt2: isn't config rebuilding that toplevel Makefile? not sure. perhaps give it a try. i always do reconfigure in cases of a change. |
| 20:07.52 | Cotulla | are u using in your kernel handling of amplifier inside kernel or have android library for it? |
| 20:07.57 | Cotulla | btw thanks |
| 20:08.12 | WisTilt2 | Cotulla, its being turned on in kernel currently |
| 20:08.30 | Cotulla | :) |
| 20:08.35 | Alex[sp3dev] | in 27 it is done in kernel. with new acoustic gpios are in kernel but are only triggered by an ioctl from userland |
| 20:08.54 | Cotulla | just no sound yet for me |
| 20:09.20 | Cotulla | Alex, I am decide to port stuffs from leo, they are better there :) |
| 20:09.39 | Alex[sp3dev] | Cotulla: ok. just don't tell me why they're better |
| 20:09.48 | Cotulla | they are just looks clear |
| 20:10.16 | Alex[sp3dev] | dunno. my 35 tree and jerome's acoustic looks fine to me. but. do whatever seems easier to you |
| 20:10.22 | Cotulla | leaved it for 15 hours, got 37% discharge is it normal? but I don't know if this percents are fake or not. |
| 20:10.30 | Cotulla | with SIM in |
| 20:11.47 | Alex[sp3dev] | wow acer and nvidia are crazy motherfuckers. they're controling gpios from userspace via sysfs gpio interface |
| 20:12.16 | Willd | Alex[sp3dev]: On what device or card? :o |
| 20:12.25 | Alex[sp3dev] | Willd: on iconia a500 |
| 20:12.30 | Willd | Hah :) |
| 20:13.02 | Cotulla | is it this shit with 1024x400? |
| 20:13.50 | Alex[sp3dev] | 1280x600 but still shit. but tegra2 is very fast and eats little battery so it's just perfect for ebooks and surfing web |
| 20:14.00 | Alex[sp3dev] | 1280x800 actually |
| 20:14.44 | Cotulla | oh |
| 20:14.52 | Willd | Something :) |
| 20:14.57 | Cotulla | and there won't be dualsided world |
| 20:15.01 | Alex[sp3dev] | i just didn't want to buy an atom netbook |
| 20:15.03 | Cotulla | it's not my choose |
| 20:31.31 | WisTilt2 | emwe: config rebuild fixed it thanks. I am testing the *new* PM and FB patches i'm about to commit. should make everyone happy, I left spinlocks and kernel warning in:) These patches will bring autobuild current (except for button lights) with my test kernel so people can stop complaining to me that autobuild doesn't have failed wakes and battery savings. |
| 20:32.12 | *** join/#htc-linux MN-- (~yaaic@host86-134-185-170.range86-134.btcentralplus.com) |
| 20:32.16 | Alex[sp3dev] | WisTilt2: how about we build a test kernel and system with new acoustic and make a massive testing? |
| 20:33.17 | WisTilt2 | sounds good. is acoustic in the current .27 tree already? |
| 20:34.19 | Alex[sp3dev] | no, you'll need to pull it from jbruneaux tree. probably we should wait a bit with it. I cannot build userspace libs right now so we need stinebd or hyc to do, as they should have a prebuilt android tree already |
| 20:36.41 | Jhinta | hi cotulla , i 'm working on a ubuntu port on dhd , and the touschreen is not wokring do you have any how to on this? |
| 20:37.45 | emwe | WisTilt2: i can feel your pain with all those user nagging :) |
| 20:39.59 | WisTilt2 | emwe: well both patches working perfectly on my phone. don't like the led status in autobuild though, too used to my blinking setup. |
| 20:40.49 | emwe | WisTilt2: haven't looked at hyc's fixup patch, iirc he changed them. to what "state", i dunno. |
| 20:41.07 | emwe | rather have thos rhod centric pushed by a rhod'er. |
| 20:41.33 | emwe | where's bzo?! acl beeing busy with girls all the time... |
| 20:41.49 | Alex[sp3dev] | emwe: feeling jealous? |
| 20:42.07 | emwe | Alex[sp3dev]: i have a girl for 9 years. |
| 20:42.25 | emwe | living in wild marriage we use to say. |
| 20:42.38 | WisTilt2 | so did we ever decide if my button light temporary fix in the kernel is a go? if so, i need to clean it up to stop the microp error spamming. i kind of threw that together quickly since everyone wanted it. |
| 20:43.03 | emwe | WisTilt2: i think there's that hyc follow up patch putting that in a work queue. |
| 20:43.34 | Cotulla | Jhinta, hi |
| 20:43.55 | WisTilt2 | ah, ok. its actually already in a work queue but shares keyboard backlight and pukes because it can call in sleep state. |
| 20:44.03 | Cotulla | check which coordinate driver returns at "UP" event |
| 20:44.48 | Alex[sp3dev] | WisTilt2: do you get i2c errors when entering suspend? |
| 20:45.26 | Cotulla | ~seen [acl] |
| 20:45.42 | apt | [acl] <~abel@cpe-69-203-141-229.si.res.rr.com> was last seen on IRC in channel #htc-linux, 1d 15h 7m 30s ago, saying: 'jonpry: aite bro.. its nap time.. ill ttyl'. |
| 20:45.42 | Cotulla | yes where acl |
| 20:45.42 | Alex[sp3dev] | he's in my gmail lol |
| 20:45.56 | Cotulla | nap nap nap nap! |
| 20:46.00 | WisTilt2 | Alex[sp3dev], dont remember if they're happening in suspend or resume. easy enough to fix just didn't get back to that. |
| 20:46.05 | MN-- | wake wake wake lol |
| 20:46.16 | Cotulla | ohh MN |
| 20:46.20 | Cotulla | :) |
| 20:46.23 | Cotulla | u still here? |
| 20:46.59 | MN-- | yeah :) long time how are you |
| 20:47.11 | Cotulla | me nice |
| 20:47.13 | Cotulla | u? |
| 20:47.26 | Alex[sp3dev] | WisTilt2: i'm killing (well, syncing) workqueue on suspend but i guess i need to convert platform drivers to early suspend so that it finishes before i2c goes to sleep. or maybe msm_i2c must be fixed to wait for xfer complete before suspending |
| 20:47.41 | MN-- | yeah good got a dhd :) |
| 20:48.18 | Alex[sp3dev] | what's the point of swapping hd2 for dhd? |
| 20:48.40 | Cotulla | ya |
| 20:48.42 | Cotulla | no point |
| 20:48.43 | Cotulla | :) |
| 20:48.45 | Cotulla | <3 LEO |
| 20:49.33 | Jhinta | cotulla , do you mean when moving up , with up event |
| 20:49.52 | Cotulla | I means when u remove finger from screen |
| 20:49.57 | Cotulla | check coordinates in this event |
| 20:50.10 | Cotulla | or it's not working at all? |
| 20:50.33 | WisTilt2 | Alex[sp3dev] yeah that's what I was going to do with the button lights, move to early suspend. that should fix those i2c errors. |
| 20:51.05 | WisTilt2 | would be harder to fix i2c to wait i think |
| 20:51.12 | MN-- | Alex i didn't i still use my hd2 got dhd as a gift |
| 20:51.13 | Alex[sp3dev] | need to look into it |
| 20:51.30 | Alex[sp3dev] | MN--: is it comfortable to be sitting on two chairs? |
| 20:51.32 | Jhinta | only in kernel space |
| 20:51.46 | Cotulla | sell dhd and by two other LEOs |
| 20:52.09 | MN-- | well the dhd is a backup and i use it wifi only |
| 20:52.12 | Cotulla | Jhinta, what is status of ts in ubuntu? |
| 20:52.13 | Alex[sp3dev] | Cotulla: sorry to disappoint you, but a new LEO costs the same as a new DHD now. |
| 20:52.14 | *** join/#htc-linux joshkoss (c0ea0219@gateway/web/freenode/ip.192.234.2.25) |
| 20:52.20 | Cotulla | shit |
| 20:52.29 | Jhinta | xinit -e ginn works as seams / xorg evdev ass driver makes it goos all the way op and left and stayes there |
| 20:52.31 | MN-- | hd2 ftw :) |
| 20:52.38 | joshkoss | cotula you around, this is joshkoss from xda. got a question regarding somone modding your magldr |
| 20:52.47 | Cotulla | so u press |
| 20:52.51 | Cotulla | and pointer moves to point |
| 20:52.57 | Cotulla | and when u release the finger |
| 20:53.04 | Cotulla | it moves to the corner back, right? |
| 20:53.04 | Jhinta | also as fare as i know , ts will not work as we dont have singe touch in source |
| 20:53.15 | Jhinta | no , stayes |
| 20:53.20 | Jhinta | with evdev |
| 20:54.14 | Jhinta | poiter does not moves to point but up left max and stayes there for ever |
| 20:55.11 | MN-- | yeah cotulla someone edited magldr text would you be with okay with thay? |
| 20:55.21 | Alex[sp3dev] | kill him |
| 20:55.49 | fakker | he knos |
| 20:56.23 | Cotulla | Jhinta, maybe wrong bounds |
| 20:57.22 | MN-- | lol i dont see amything wrong with it but its cotulla choice |
| 20:58.10 | Jhinta | the only driver that did work was a touchpad driver , but was rotated 15 |
| 20:59.03 | Cotulla | rotated? |
| 20:59.07 | Cotulla | u may need edit X11 config file |
| 20:59.24 | Jhinta | http://ubuntuforums.org/showthread.php?t=1334696 |
| 20:59.54 | Jhinta | well we did all kind of xorg editing , nothing helps , this one is the only one working |
| 21:00.33 | Jhinta | it is a touchpad driver but it works but only 15 rotated right |
| 21:00.47 | Cotulla | hm |
| 21:01.01 | Cotulla | regular touchscreen driver doesn't recognize finger press? |
| 21:02.53 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
| 21:03.02 | Jhinta | witch is regular ? if you mean evdev yes but max out up-left but pressing on screen does make a event pup up but it woont move |
| 21:06.01 | Jhinta | grail-touch /dev/input/event1 work all oke |
| 21:06.57 | Cotulla | evdev yes... |
| 21:07.12 | Cotulla | so it always in the corner |
| 21:07.13 | Cotulla | right? |
| 21:07.16 | Jhinta | yep |
| 21:11.47 | Cotulla | hm |
| 21:12.26 | Jhinta | ill make a a smal vid so you know what i mean |
| 21:12.31 | Cotulla | ok |
| 21:12.37 | Cotulla | which touchscreen in ur ACE? |
| 21:13.21 | Jhinta | that i dont know but i think its using a atmel driver |
| 21:15.24 | Cotulla | u can compare with my leo driver |
| 21:15.27 | Cotulla | it works in ubuntu |
| 21:15.30 | Cotulla | from dcordes words |
| 21:15.38 | Jhinta | lets try |
| 21:18.02 | Cotulla | http://gitorious.org/~cotulla/linux-on-wince-htc/linux_leo_cotulla/blobs/master/arch/arm/mach-msm/board-htcleo-ts.c |
| 21:18.40 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
| 21:19.15 | *** join/#htc-linux ornll (~ornll@bzq-79-179-36-219.red.bezeqint.net) |
| 21:19.19 | Cotulla | u can compile kernel, right? |
| 21:19.42 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-133-138.98-62.inwind.it) |
| 21:23.02 | Cotulla | there |
| 21:23.03 | Cotulla | <PROTECTED> |
| 21:23.03 | Cotulla | 351 input_report_abs(ts->input_dev, ABS_Y, ts->pt1.y); |
| 21:23.03 | Cotulla | 352 input_report_abs(ts->input_dev, ABS_PRESSURE, 0); |
| 21:23.03 | Cotulla | 353 input_report_abs(ts->input_dev, ABS_TOOL_WIDTH, 0); |
| 21:23.03 | Cotulla | 354 input_report_key(ts->input_dev, BTN_TOUCH, 0); |
| 21:23.09 | Cotulla | while most android drivers |
| 21:23.13 | Cotulla | have only last line |
| 21:23.15 | *** join/#htc-linux LargePrime (~LargePrim@184-216-174-111.pools.spcsdns.net) |
| 21:23.16 | Cotulla | <PROTECTED> |
| 21:23.20 | Cotulla | it may cause problems |
| 21:23.22 | Cotulla | :) |
| 21:24.49 | Jhinta | ass it seems input_dev, ABS_x is what we dont have |
| 21:25.57 | Cotulla | I am looking to |
| 21:25.57 | Cotulla | ace-2.6.32-g5ed1769\drivers\input\touchscreen\atmel_tsadcc.c |
| 21:26.07 | Cotulla | there only DOWN part specify ABS_X |
| 21:26.16 | Cotulla | and UP part only BTN_TOUCH 0 |
| 21:26.25 | Cotulla | afaik it's a problem |
| 21:38.24 | Jhinta | cotulla the driver is atmel.c |
| 21:39.22 | Jhinta | tsadcc.c does not even get compiled |
| 21:39.34 | Cotulla | there no ABS_Y |
| 21:39.38 | Cotulla | so replace |
| 21:39.56 | Cotulla | and change init also |
| 21:39.58 | Cotulla | like in my driver |
| 21:40.01 | *** join/#htc-linux problem (3ec285fd@gateway/web/freenode/ip.62.194.133.253) |
| 21:40.14 | problem | hi everyone |
| 21:43.38 | *** join/#htc-linux akirax (~androirc@80.30.199.7) |
| 21:45.40 | Jhinta | cotulla , sorry , but can you use this source for compare , i have this kernel , the standaard kernel is not correct its even has bin fixed to even compile it |
| 21:45.47 | Jhinta | https://github.com/Kali-/htc-kernel-ace |
| 21:46.13 | Cotulla | u need just modify driver |
| 21:46.15 | Cotulla | replace |
| 21:46.25 | Cotulla | MT input by touchscreen one... |
| 21:46.40 | Cotulla | like ABS_MT_POSITION_X -> ABS_X |
| 21:46.42 | Cotulla | and etc |
| 21:47.10 | Cotulla | simple operation |
| 21:48.02 | Jhinta | ow oke |
| 21:48.03 | Jhinta | lol |
| 21:48.39 | stinebd | WisTilt2: you don't happen to have a spare att nexus one lying around do you? |
| 21:52.32 | Jhinta | oke , i do know what you mean , but a bit lost in space , but this funn , iḿ going to try to find what you mean , becuase i realy a beginner ad this . but first try on my own. |
| 21:52.46 | Jhinta | cotulla , i want to thank you for this kind of info |
| 21:59.28 | *** join/#htc-linux rajkosto (~rajkosto@2001:5c0:1511:4e01:d5b2:ccb4:4315:4411) |
| 22:04.39 | WisTilt2 | stinebd: say what? we only have tilt2's around here, plus 1 of those fancy android phones |
| 22:05.05 | WisTilt2 | you get my msg your next test kernel is hot off the press? |
| 22:09.56 | stinebd | not yet, busy atm |
| 22:10.07 | stinebd | trashed my real life phone and it has to go out for repair |
| 22:10.28 | WisTilt2 | sounds like you'll be carrying the ole' raph now:) |
| 22:10.57 | stinebd | well this complicates things greatly for me |
| 22:11.12 | stinebd | i had voip/google voice set up on that phone for my trip to japan to avoid using international minutes |
| 22:11.19 | stinebd | the raph clearly can't do that |
| 22:11.23 | WisTilt2 | i have an old Tilt1 I can send you that works great if that'll help? |
| 22:11.46 | stinebd | nah, but thanks for the offer |
| 22:11.55 | stinebd | i'm gonna need a real android phone |
| 22:12.13 | stinebd | or maybe have to find a winmo sip client |
| 22:23.10 | WisTilt2 | jonpry: I don't know where that exact code is located i'm talking about but the gpio you need turned on for power is 0x57. It is set high somewhere, I just can't find it yet. |
| 22:28.49 | *** join/#htc-linux D3tul3 (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
| 22:30.15 | *** join/#htc-linux xtrar (~xrar@94.19.219.159) |
| 22:31.47 | xtrar | Hello yáll its my first time here and overwhelmed seeing cotulla on the users list :) |
| 22:32.47 | xtrar | I got an htc hd2 running hyperdroid cm7 well i ran into wireless and bluetooth problems |
| 22:33.55 | xtrar | Wireless wont find networks except they were virtual e.g. from a pc, basically it cant locate routers and well the bluetooth headset worked only in at some particularly odd angles |
| 22:35.52 | xtrar | well did an hard reset and changed roms just asking for some help am guessing its hardware myself but i just need some more experienced opinions |
| 22:35.52 | *** join/#htc-linux tyween (~tyween@pool-71-163-117-57.washdc.fios.verizon.net) |
| 22:48.32 | jonpry | WisTilt2, would that gpio effect power button, front buttons and keypad? |
| 22:49.13 | WisTilt2 | front buttons and keypad for sure, don't know about power button but possible |
| 22:50.15 | WisTilt2 | it also powers one of the green/orange leds, don't remember which one |
| 22:51.23 | xtrar | h |
| 22:51.25 | WisTilt2 | i think power button is 0x53 if memory serves me correctly |
| 22:51.40 | xtrar | hello can someone tell me if am even noticeable? |
| 22:51.51 | *** join/#htc-linux the8flux (~glenn@pool-74-103-113-50.bltmmd.fios.verizon.net) |
| 22:52.17 | WisTilt2 | xtrar i see you yes. cant help you with your problem, tp2 only here |
| 22:52.19 | jonpry | WisTilt2, i see topaz-panel driving that |
| 22:52.47 | WisTilt2 | jonpry which one 0x57? |
| 22:53.07 | jonpry | yeah |
| 22:53.20 | xtrar | Ok that could have worked my print looks lighter than you guys own. |
| 22:53.49 | WisTilt2 | different on topa if its panel for them. 0x57 is definitely button/kpd on rhod |
| 22:54.39 | *** part/#htc-linux the8flux (~glenn@pool-74-103-113-50.bltmmd.fios.verizon.net) |
| 22:55.05 | jonpry | did you update your git config to the new repo? |
| 22:55.37 | WisTilt2 | on which branch .27 or .39? |
| 22:55.44 | jonpry | 39 |
| 22:56.07 | WisTilt2 | oh .git/config yes updated on both |
| 22:56.23 | WisTilt2 | just added user info if thats what you mean |
| 22:56.36 | jonpry | no its changed location |
| 22:57.01 | WisTilt2 | don't follow you? |
| 22:57.23 | jonpry | edit .git/config for 39, and make it say: url = git@gitorious.org:linux-msm-rhod/linux-msm-rhod.git |
| 22:58.01 | WisTilt2 | ah ok. it still has ~acl and so on in it |
| 22:58.37 | jonpry | this way you can get my new commits |
| 22:58.45 | WisTilt2 | so just as you have above? no git://gitorious.org etc? |
| 22:59.05 | jonpry | just as above |
| 22:59.15 | WisTilt2 | ok done |
| 23:00.02 | jonpry | i'm wondering why rhobuntu won't boot |
| 23:00.27 | WisTilt2 | hmm, now git pull wants to verify rsa? |
| 23:00.53 | jonpry | i think thats fine |
| 23:01.07 | WisTilt2 | drops connection permission denied now |
| 23:01.13 | jonpry | for pull? |
| 23:01.17 | stinebd | peasants heed |
| 23:01.17 | WisTilt2 | yes |
| 23:01.25 | stinebd | i shall test thine new kernel thar yonder |
| 23:01.27 | WisTilt2 | looks like i need publickey |
| 23:01.34 | jonpry | maybe upload your public key to gitorious |
| 23:01.55 | jonpry | the url i gave you is good for commits. i guess it authenticated on pull as well |
| 23:02.00 | stinebd | the better way to do this is git remote set-url --push git@gitorious.org:linux-msm-rhod/linux-msm-rhod.git |
| 23:02.11 | *** join/#htc-linux arrrghhh (~arrrghhh@c-24-9-150-163.hsd1.co.comcast.net) |
| 23:02.22 | jonpry | show off :p |
| 23:02.25 | WisTilt2 | so i need to generate public key and stick it in my ssh keys on my account? |
| 23:02.26 | stinebd | gotta add origin in there somewhere too |
| 23:02.39 | stinebd | by setting the push url, you don't have to provide ssh credentials to do pulls |
| 23:02.42 | jonpry | WisTilt2, thats the idea |
| 23:02.49 | WisTilt2 | ok brb |
| 23:05.25 | WisTilt2 | ok that did it |
| 23:05.40 | WisTilt2 | i wondered why i wasn't getting any of your commits updated |
| 23:05.50 | WisTilt2 | thought you made them private or something:) |
| 23:06.15 | stinebd | WisTilt2: how close is this kernel to upstream? |
| 23:06.28 | WisTilt2 | this is .39 |
| 23:06.36 | stinebd | i mean the tester i'm going to try out |
| 23:07.01 | WisTilt2 | oh. its 100% with current .27 tree with only my raph panel mod |
| 23:07.12 | stinebd | ok cool |
| 23:07.30 | stinebd | i must create a new data store |
| 23:07.34 | WisTilt2 | ah wait, no it also has my PM in it now since I just committed it |
| 23:07.52 | stinebd | in the words of sir thomas petty, the waiting is the hardest part |
| 23:08.03 | WisTilt2 | scratch that:) i built that one for you last night so its same at git |
| 23:08.13 | stinebd | stop playing with my emotions |
| 23:09.58 | WisTilt2 | omg jonpry, you have a lot of changes since i cloned your tree |
| 23:10.13 | Cotulla | proximity power is GPIO or MicroP? |
| 23:10.33 | jonpry | WisTilt2, lots of good stuff |
| 23:10.43 | WisTilt2 | ill build and see if this one boots |
| 23:11.02 | WisTilt2 | Cotulla gpio but microp needed also to set it up |
| 23:11.17 | Cotulla | 35? |
| 23:11.22 | WisTilt2 | .27 |
| 23:11.35 | WisTilt2 | or gpio? |
| 23:11.43 | Cotulla | 0x25 microp? |
| 23:11.55 | WisTilt2 | no, thats leds and some mic stuff |
| 23:12.04 | Cotulla | ok... |
| 23:12.12 | Cotulla | so GPIO99 |
| 23:12.14 | WisTilt2 | i'd have to dig into my code to get prox microp info |
| 23:12.32 | WisTilt2 | yeah 99 sounds right, i know it's way up there |
| 23:12.50 | Cotulla | ok |
| 23:12.52 | Cotulla | thnks |
| 23:14.14 | stinebd | WisTilt2: same behavior - resume to black screen with backlight on http://paste.ubuntu.com/606316/ (dmesg) |
| 23:14.39 | WisTilt2 | is backlight full brightness or can you tell |
| 23:15.10 | stinebd | graduates up to [ 396.884277] microp-klt: Setting lcd-backlight brightness to: 0x30 |
| 23:15.29 | stinebd | hard to tell with black but i don't think it's 100% |
| 23:15.38 | WisTilt2 | no graphics even if you touch screen anywhere? |
| 23:15.51 | stinebd | right |
| 23:16.13 | WisTilt2 | k. we'll keep trying all the combos til we find the magic one |
| 23:16.33 | WisTilt2 | at least we know we have battery saving now on raph:) |
| 23:17.23 | WisTilt2 | i see we're not getting the incorrect panel type as sharp now, staying with hitachi like it should after power off |
| 23:17.44 | stinebd | something i've noticed with these kernels is that navipad doesn't resume after sleep. not sure if it does on upstream kernels though |
| 23:18.03 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
| 23:18.07 | jonpry | WisTilt2, didn't get anything gpio 87 |
| 23:18.16 | WisTilt2 | i haven't touched any of that so probably happening elsewhere |
| 23:18.41 | WisTilt2 | jonpry, you set gpio 87 to 1 and nothing still? |
| 23:20.04 | jonpry | yeah |
| 23:20.24 | jonpry | i got further in rhobuntu this time |
| 23:20.32 | jonpry | Setting console font and keymap |
| 23:21.18 | WisTilt2 | im building your current source to see if i get any further now |
| 23:21.35 | jonpry | using the new config? |
| 23:21.47 | WisTilt2 | msm_defconfig? |
| 23:22.06 | WisTilt2 | and yes .git/config pulled all the new patches |
| 23:22.16 | jonpry | yeah, but it has new stuff |
| 23:22.36 | WisTilt2 | it pull a ton of changes |
| 23:24.08 | WisTilt2 | i still see the mddi_probe mismatch during compile |
| 23:24.22 | *** join/#htc-linux LargePrime (~LargePrim@184-216-174-111.pools.spcsdns.net) |
| 23:24.25 | jonpry | you were fixing that no? |
| 23:24.26 | WisTilt2 | and now also a gpio_event_probe mismatch |
| 23:24.39 | WisTilt2 | yeah i didn't fix mddi yet |
| 23:29.24 | WisTilt2 | same damn thing. no space left right after touchscreen calib. however this time on boot it looks like you put autobl on? screen dimmed shortly into boot like on .27 |
| 23:30.46 | jonpry | yeah its got klt |
| 23:31.16 | WisTilt2 | well that part worked. |
| 23:33.40 | WisTilt2 | i havent tried to see if sdcard is read only to this kernel yet. I guess I can add an output in msm_sdcc to see what it thinks |
| 23:34.30 | jonpry | WisTilt2, it prints it to dmesg anyways |
| 23:34.50 | WisTilt2 | i cant get dmesg though, it hard locks at that point |
| 23:34.58 | jonpry | ram console |
| 23:35.13 | WisTilt2 | how? |
| 23:35.44 | jonpry | you don't know how to do ram console? |
| 23:36.10 | stinebd | you'll need haretconsole, usb and a command |
| 23:36.14 | jonpry | i just booted rhobuntu all the way to x server |
| 23:36.16 | stinebd | ~ramconsole |
| 23:36.16 | apt | extra, extra, read all about it, ramconsole is pwf dm 0x8e0000 0x20000 |
| 23:37.57 | jonpry | does the new .35 in .27 msm_fb not work with rhobuntu? where is the refresh thread? |
| 23:38.10 | WisTilt2 | hmm, the sd card is messed up. stuck it in laptop and it is read only but booted into winmo on phone i can write to it |
| 23:38.35 | jonpry | thats interesting |
| 23:38.54 | WisTilt2 | booted into android and adb cant push to it either |
| 23:39.07 | WisTilt2 | format time |
| 23:39.23 | jonpry | at least its not just 39 |
| 23:39.41 | WisTilt2 | it was formatted vfat |
| 23:39.58 | *** join/#htc-linux JesusFreak316_ (~JesusFrea@pool-173-65-73-241.tampfl.fios.verizon.net) |
| 23:40.04 | jonpry | mine are all vfat |
| 23:40.09 | WisTilt2 | im going to blame it on the few times ive booted into winmo |
| 23:40.43 | stinebd | effing winmo |
| 23:41.48 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
| 23:42.52 | jonpry | lol |
| 23:50.09 | *** join/#htc-linux XirXes (~xirxes@71-35-197-137.slkc.qwest.net) |
| 23:53.43 | Cotulla | why inside static long snd_ioctl() mdelay() used instead of msleep()? |
| 23:56.02 | *** join/#htc-linux Rajko (~rajkosto@cable-94-189-245-251.dynamic.sbb.rs) |
| 23:56.27 | WisTilt2 | mdelay being a busy wait loop probably isn't really needed there but either will work |
| 23:57.29 | Cotulla | yes, it's why I ask |
| 23:57.49 | WisTilt2 | i'd use msleep unless the delay is only a few ms |
| 23:59.13 | Cotulla | I am porting audio routing now |