00:00.48 | *** join/#htc-linux Curious_ (8bb3cfe2@gateway/web/freenode/ip.139.179.207.226) |
00:00.51 | Curious_ | if any rom-leaker from htc is reading this, PLEASE leak desire-GB SENSE |
00:01.10 | *** part/#htc-linux Curious_ (8bb3cfe2@gateway/web/freenode/ip.139.179.207.226) |
00:01.57 | *** join/#htc-linux iwanrakic (b2db062b@gateway/web/freenode/ip.178.219.6.43) |
00:05.28 | *** join/#htc-linux gauner1986 (~Adium@p5B383A31.dip.t-dialin.net) |
00:05.39 | *** join/#htc-linux gauner19861 (~Adium@p5B383A31.dip.t-dialin.net) |
00:13.58 | *** join/#htc-linux Daevoq (~IceChat7@host247-169-dynamic.252-95-r.retail.telecomitalia.it) |
00:15.32 | *** join/#htc-linux hardwalker (~hardwalke@114-33-201-92.HINET-IP.hinet.net) |
00:22.18 | *** join/#htc-linux mitsutaka (~mitsutaka@rt.miraclelinux.com) |
00:29.12 | *** join/#htc-linux AntiSociaL (~ntiSociaL@unaffiliated/antisocial) |
00:31.24 | AntiSociaL | hmmm |
00:31.31 | AntiSociaL | how's this project going? |
00:34.55 | *** join/#htc-linux _Nash (~DeML@unaffiliated/nash/x-0795030) |
00:36.58 | AntiSociaL | vg\ |
00:36.58 | AntiSociaL | bdfg |
00:36.58 | AntiSociaL | fdg |
00:36.59 | AntiSociaL | DSFG |
00:36.59 | AntiSociaL | SDF |
00:36.59 | AntiSociaL | G |
00:36.59 | AntiSociaL | DFG |
00:37.00 | AntiSociaL | D |
00:37.00 | AntiSociaL | FG |
00:37.01 | AntiSociaL | DFg |
00:37.01 | AntiSociaL | DFG |
00:37.02 | AntiSociaL | D |
00:37.02 | AntiSociaL | FG |
00:37.03 | AntiSociaL | DFG |
00:37.03 | AntiSociaL | d |
00:37.16 | *** join/#htc-linux gauner1986 (~Adium@p5B383A31.dip.t-dialin.net) |
00:37.16 | AntiSociaL | a |
00:37.17 | AntiSociaL | a |
00:37.18 | AntiSociaL | aa |
00:38.21 | parmaster | this project is vast, also shut up |
00:39.40 | _Nash | He's not even in here. |
00:42.14 | *** part/#htc-linux _Nash (~DeML@unaffiliated/nash/x-0795030) |
00:43.35 | AntiSociaL | also |
00:43.42 | AntiSociaL | suck my left nut |
00:43.44 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-116-137.98-62.inwind.it) |
00:43.48 | *** part/#htc-linux AntiSociaL (~ntiSociaL@unaffiliated/antisocial) |
00:59.49 | dharvey4651 | wow.. |
01:07.51 | *** join/#htc-linux Daevoq (~IceChat7@host141-105-dynamic.56-79-r.retail.telecomitalia.it) |
01:14.15 | *** join/#htc-linux camro (~camro@89-104-29-101.customer.bnet.at) |
01:18.20 | *** join/#htc-linux programmer8922 (~Evan@156.110.78.2) |
01:30.28 | *** part/#htc-linux iwanrakic (b2db062b@gateway/web/freenode/ip.178.219.6.43) |
01:33.20 | *** join/#htc-linux HardDisk_WP (~marco@velirat.de) |
01:33.20 | *** join/#htc-linux HardDisk_WP (~marco@wikipedia/harddisk) |
01:42.43 | *** join/#htc-linux crawling (~crawling@a94-132-176-196.cpe.netcabo.pt) |
01:57.29 | *** join/#htc-linux Drakh_ (Drakh@190.42.70.170) |
02:08.35 | *** join/#htc-linux condor73 (~condor73@5ED2142D.cm-7-3a.dynamic.ziggo.nl) |
02:23.27 | *** join/#htc-linux EdLin (~EdLin@securabit/listener/edlin) |
02:27.31 | *** join/#htc-linux fakker (~noobhands@cpc13-hitc6-2-0-cust129.9-2.cable.virginmedia.com) |
03:08.28 | *** join/#htc-linux LargePrime (~LargePrim@70-9-130-94.pools.spcsdns.net) |
03:24.46 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
03:26.36 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
03:38.01 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
03:40.50 | *** join/#htc-linux balans (~barry@82-170-217-205.ip.telfort.nl) |
03:40.58 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
03:42.39 | jonpry | WisTilt2, sup dude? |
03:43.14 | WisTilt2 | jonpry, yo. man im beat. 3 days at disneyland with my grand kids is a bit much |
03:43.24 | WisTilt2 | need a vacation to recoop |
03:43.36 | jonpry | ah, maybe go to legoland |
03:43.57 | jonpry | i've recreated your technology for the most part |
03:44.01 | WisTilt2 | yeah probably would have been less demanding. had a great time though. |
03:44.27 | WisTilt2 | you figure out the missing stuff i was leaning you towards? |
03:44.40 | jonpry | sort of |
03:45.01 | jonpry | like i found the sleep timer in a dex call. presumably it is arm9's sleep timer, but who cares |
03:45.21 | jonpry | and i am using rtc to wake it up, which has low granularity and high jitter |
03:45.25 | *** join/#htc-linux Segnale007 (~Segnale00@ppp-116-137.98-62.inwind.it) |
03:45.52 | WisTilt2 | you setup a timer to wake at X interval? |
03:46.07 | jonpry | yeah, its just in seconds |
03:46.24 | jonpry | and i have quickwakeup now. so i can wake and sleep in ~20ms |
03:46.45 | WisTilt2 | with out without scheduler |
03:46.57 | jonpry | no schedule |
03:47.13 | jonpry | no resume for that matter |
03:48.22 | WisTilt2 | nice. then you figured out the method i was referring to being somewhat locked up from our standpoint |
03:48.37 | WisTilt2 | license wise that is |
03:49.22 | jonpry | there is a bug i can't fix though |
03:49.26 | WisTilt2 | found out about this manufacturer license i mentioned, none other than MS |
03:49.46 | jonpry | nothing high tech |
03:49.55 | jonpry | just me not understanding pm i think |
03:50.23 | jonpry | for awake measurements i am just setting up a periodic deal with add_timer() |
03:50.32 | jonpry | and it seems to prevent the phone from sleeping |
03:50.41 | jonpry | doesn't even try, no checks for wakelocks in dmesg |
03:51.05 | WisTilt2 | are you waking arm11 at all by chance? |
03:51.22 | jonpry | i don't understand |
03:51.47 | WisTilt2 | you're saying when you do your quickwakeup it doesn't sleep afterwards? |
03:52.16 | jonpry | no that stuff is fine |
03:52.39 | jonpry | its taking measurements while awake that doesn't work |
03:52.44 | jonpry | the easy part |
03:53.13 | WisTilt2 | the add_timer() is preventing sleep though? |
03:53.46 | jonpry | i think so |
03:54.02 | jonpry | http://gitorious.org/scbs/scbs/blobs/master/scbs.c 143:wake_time_fn() |
03:54.14 | jonpry | running that will prevent it from ever trying to sleep |
03:54.18 | WisTilt2 | that was my next question, let me take a look |
03:55.45 | jonpry | this was the last part i ever expected to be hard |
03:56.04 | jonpry | the thing will sit there taking measurements while asleep all day long, and wake up and upload it to software |
03:56.17 | jonpry | but i can't take them under normal operation! |
04:03.51 | WisTilt2 | so the timer works fine in sleep? |
04:04.26 | jonpry | uses a different timer |
04:04.30 | jonpry | that is an rtc alarm |
04:05.36 | *** join/#htc-linux Drakh_ (Drakh@190.42.40.105) |
04:05.51 | WisTilt2 | which add_timer are you using, kernel timer.c or something else? |
04:06.21 | jonpry | kernel |
04:06.50 | WisTilt2 | you have to specify which cpu to put the timer on |
04:07.12 | jonpry | what? |
04:08.27 | WisTilt2 | hang on, let me look further. i think you have to pass which cpu to the timer but i may be thinking of something else... |
04:09.05 | jonpry | that doesn't make any sense |
04:09.39 | jonpry | kernel timers are just a product of the scheduler |
04:09.43 | WisTilt2 | yeah nm, im thinking of multi core cpus |
04:09.58 | jonpry | they get run in x jiffies |
04:10.00 | jonpry | and the timer works fine |
04:10.13 | WisTilt2 | so in wake are you actually getting time up but sleep never happens again right? |
04:10.21 | WisTilt2 | timer* |
04:10.35 | jonpry | its like it thinks the phone isn't idle |
04:10.39 | jonpry | or idle long enough |
04:10.42 | jonpry | or can idle |
04:11.12 | WisTilt2 | yeah sounds like thats the problem. how long is the actual timer interval |
04:11.22 | jonpry | i'm not sure how it decides to suspend. and debugging it is a nightmare because it seems to think about it every jiffy |
04:11.32 | jonpry | i have it set to 5 seconds |
04:11.45 | jonpry | i'm pretty sure it would sleep if i set it to something bigger |
04:12.31 | WisTilt2 | thats the problem. i have my kernel sleeping in under 1 sec now. there are several things that need to be changed for that to happen |
04:12.52 | WisTilt2 | normal sleep time is around 5-7 secs as the current code is written |
04:12.58 | jonpry | why would my timer prevent it from sleeping? |
04:13.10 | jonpry | what about it firing says abort suspend? |
04:13.35 | jonpry | i mean you can have a process spinning, eating up cpu and it will still suspend |
04:13.59 | WisTilt2 | are you doing this with .27? |
04:14.05 | jonpry | yes |
04:14.46 | WisTilt2 | let me pull up one of the source files for you to make some changes to and see if it sleeps... give me a few |
04:15.04 | jonpry | i don't really want to make the phone sleep faster |
04:15.26 | jonpry | i want it to be wholly inconsiderate of my code |
04:16.35 | *** join/#htc-linux |Atom| (~atom@82.194.234.249) |
04:19.18 | WisTilt2 | jonpry: ok we'll pass on that then. you sure there are no wake locks at the time of suspend request? |
04:20.01 | jonpry | yeah, but it doesn't even check them |
04:20.10 | jonpry | like if i plug usb in and let it sit there |
04:20.33 | jonpry | normally i will get wakelock evdev and vbus every 5 seconds or so |
04:20.52 | jonpry | but if my daemon is running, and consequently the timer. then there is no message |
04:21.11 | WisTilt2 | and you are seeing the "abort suspend" every time? |
04:21.17 | WisTilt2 | after add_timer |
04:21.44 | jonpry | yeah whenever the timer is running, it doesn't try |
04:22.32 | WisTilt2 | can you pastebin part of dmesg that shows before and after the abort suspend cycle |
04:22.53 | jonpry | i'll have to generate that |
04:23.14 | WisTilt2 | i went through this somewhat similarly when i setup wake intervals, although i did it a bit different than you are |
04:23.31 | WisTilt2 | your code looks very nice btw |
04:24.17 | jonpry | you haven't seen what i did to timer.c :p |
04:24.33 | WisTilt2 | i can only image. you havent seen what i did to pm:) |
04:24.37 | WisTilt2 | imagine |
04:25.14 | jonpry | i mostly just added some code for calculating new kind of time. i wrote it like 3 times, first were pretty invasive |
04:25.36 | jonpry | i don't understand why it is constantly trying to sync dgt and gpt to smem clock |
04:26.50 | WisTilt2 | gpt is only one used isnt it? db timer isn't impemented i thought |
04:27.51 | jonpry | gpt is running the scheduler. dgt is not used, but may be implemented |
04:28.26 | *** join/#htc-linux Berger (~noreply@c65wn1.wifi.halden.net) |
04:29.06 | jonpry | afaict its like gptimer is running from an unknown source. where as smem clock is a 32khz crystal. so the code uses gptimer to get an interrupt at rough estimate time, and then spins until smem clock is the expected value |
04:29.49 | jonpry | but like how weird is that |
04:29.57 | jonpry | blows my mind |
04:33.02 | jonpry | so my first plan to get a sleep timer was that mother. |
04:33.20 | jonpry | but it turns out that can't work :p |
04:33.58 | jonpry | btw, you can't make ktime() include suspend time. so you may be interested in jonpry_time() :p |
04:34.06 | WisTilt2 | this might be a dumb question but when you run init_timer, does the timer structure already have values setup? |
04:34.46 | jonpry | well, running it in the function doesn't hurt, but i put it there while hunting down another bug |
04:35.12 | jonpry | init_timer just clears head and next pointers so it can be inserter in the list |
04:35.49 | WisTilt2 | might have another timer running that somehow tied into yours. have you tried mod_timer to change timeouts higher or lower to see if it ever sleeps? |
04:36.08 | jonpry | its already timed out when it gets to that function |
04:36.31 | jonpry | there all one shot timers |
04:36.41 | jonpry | i got that code from stupid kernel programming guide |
04:37.07 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
04:37.32 | WisTilt2 | dont you have to put spinlocks around timer setup? |
04:37.55 | jonpry | its not reentrant code |
04:38.04 | jonpry | only one copy of scbs is possible |
04:38.32 | jonpry | it all *works* fine. just keeps the bitch awake |
04:38.34 | WisTilt2 | and the interrupts dont get enabled until the timer is setup each time correct? |
04:38.59 | WisTilt2 | im probably over diagnosing, just trying to understand the flow of what you're doing |
04:39.07 | jonpry | yeah there is question about that |
04:39.25 | WisTilt2 | you might try masking the irq during setup |
04:39.26 | jonpry | its not necessarily a good idea to be doing all of that in an interrupt context |
04:40.00 | jonpry | but i'm not sure that add_timer really has irq disabled for the calls. docs are slim |
04:40.23 | WisTilt2 | i need to see the dmesg so i can see the flow during attempted suspend |
04:40.30 | jonpry | i thought about making a kthread |
04:40.55 | WisTilt2 | add_timer does not disable irq within itself |
04:40.55 | jonpry | yeah my battery is over discharged, phone won't turn on yet |
04:41.33 | jonpry | it inserting into a link list. so it could potentially spinlock_irqsave |
04:42.14 | jonpry | i can send you a kernel |
04:42.32 | jonpry | but you also need the daemon to get it good and pissed |
04:43.07 | jonpry | somebody will get us a dmesg :p |
04:43.41 | rpierce99 | i'm available if you need anything guys |
04:44.04 | jonpry | you know how to use adb? |
04:44.10 | rpierce99 | haha yeah |
04:44.20 | WisTilt2 | yeah pierce has done some good testing for me with all my pm stuff |
04:44.33 | jonpry | ok, i have some work for you :p one sec |
04:45.12 | WisTilt2 | guess arrrghhh is sleeping... have some news on this sod problem with weak signal |
04:45.59 | rpierce99 | yeah he's been looking forward to talking with you again WisTilt2, probably just wants a RIL :P |
04:46.40 | jonpry | http://prymfg.com/kernel/zImage |
04:46.43 | jonpry | http://prymfg.com/kernel/scbs |
04:46.58 | jonpry | need to adb push scbs into /system/bin |
04:47.19 | jonpry | then shell it and run scbs -d |
04:47.32 | rpierce99 | while running the new kernel i assume |
04:47.36 | jonpry | right :p |
04:48.30 | jonpry | the command will return immediately. it will be logging battery data to your sdcard. then unplug usb, wait for it to fail to suspend, reconnected, take dmesg |
04:51.15 | WisTilt2 | jonpry: did you find a boat yet? |
04:51.24 | jonpry | yeah i got one |
04:51.45 | WisTilt2 | sloop or what? |
04:51.53 | jonpry | coronado 30 sloop |
04:52.10 | WisTilt2 | nice. easy boat to handle by yourself |
04:52.18 | jonpry | which is not quite as big as i'd like :p |
04:53.24 | jonpry | been buying accessories |
04:53.29 | WisTilt2 | yeah, we had a 40' center cockpit sloop and it was nice but took 2 people to run it. 43' mast has lots of main sail area. |
04:53.46 | jonpry | oO |
04:54.14 | jonpry | this has got a 37' mast |
04:54.29 | jonpry | but it is not fast. 6.85 knot hull speed |
04:54.36 | WisTilt2 | had a friend down in St Martin that had that same boat you have now. they sailed down to barbados with us then went all the way down to venuzuela to get it painted cheap |
04:54.52 | WisTilt2 | thats not a bad hull speed. draft is about 5' isnt it? |
04:54.59 | jonpry | i here DR is the place for that |
04:55.08 | jonpry | *hear |
04:55.33 | jonpry | yeah i think it 4.5/5, not a lot of data on the coronado actually |
04:55.48 | jonpry | gotta get under her and measure it |
04:56.02 | WisTilt2 | ours was 5.5' draft and hull speed was around 6 knots unless we were running and exceeded it a few times with swells, thats always interesting to listen to:) |
04:56.30 | jonpry | only 6 in a 40'? |
04:56.39 | WisTilt2 | ferro cement hull |
04:56.55 | jonpry | ah one of those |
04:57.07 | jonpry | you can get those on the free now |
04:57.13 | rpierce99 | jonpry: after adb pushing it in, I'm trying to run it and it's returning permission denied, even after su, do i need to chmod it |
04:57.30 | jonpry | hmm |
04:57.39 | WisTilt2 | bought it from the builder that built it in cape town and sailed it to St Martin and we bought it for around 30k. that was back in 1987 |
04:57.40 | jonpry | i forgot one thing, but shouldn't be permission denied |
04:57.51 | jonpry | rpierce99, cd /dev |
04:57.56 | jonpry | mknod scbs0 c 250 0 |
04:58.24 | rpierce99 | same result |
04:59.09 | rpierce99 | meaning that command didn't return anything but i tried again and got the same result |
04:59.41 | jonpry | i guess you could try chmod +x /system/bin/scbs |
05:00.12 | rpierce99 | super cool battery software: daemon starting... |
05:00.22 | WisTilt2 | lol, nice name jonpry |
05:00.28 | rpierce99 | it's writing output to the console now |
05:00.36 | jonpry | yeah thats normal |
05:00.46 | jonpry | now disconnect usb and try to make it sleep |
05:01.48 | rpierce99 | still waiting for usb debugging to turn off, thinks it's still connected for some reason |
05:02.20 | jonpry | maybe that is the problem :p |
05:03.12 | WisTilt2 | jonpry: did you try running that from the console without usb? |
05:03.16 | rpierce99 | lock screen still shows a power plug, led is amber |
05:03.19 | jonpry | no |
05:03.48 | jonpry | rpierce99, maybe shell, killall scbs and try with console? |
05:04.40 | WisTilt2 | you'll have to open usb screen and say no on usb drive i think to kill it also |
05:05.01 | rpierce99 | as soon as i killalled it, the usb indicator went away |
05:05.06 | rpierce99 | i killed it from connectbot |
05:05.16 | jonpry | hmm |
05:05.21 | jonpry | i didn't notice that icon :p |
05:05.46 | rpierce99 | alright i started it now without usb |
05:06.12 | rpierce99 | it's sleeping now |
05:06.17 | jonpry | green light? |
05:06.20 | rpierce99 | yep |
05:06.22 | jonpry | f%^& |
05:06.26 | WisTilt2 | lol |
05:06.43 | jonpry | thanks rpierce99, i've been working on that for days |
05:06.47 | rpierce99 | np |
05:06.51 | rpierce99 | need logs? |
05:07.03 | jonpry | not really. no bugs lol |
05:07.07 | rpierce99 | k |
05:07.40 | jonpry | WisTilt2, i don't think you can fix my problem |
05:07.47 | rpierce99 | want me to run it for a while for testing the scbs stuff or do you have that covered? |
05:08.14 | jonpry | if you don't need wifi, then you can run it for long long time and send my the log file on your sdcard if you'd like |
05:08.40 | rpierce99 | nah haven't turned on wifi for weeks, just use it as normal? |
05:08.53 | jonpry | yeah, do whatever, charge discharge, use sleep. whatev |
05:09.40 | jonpry | beware of the battery meter, it will probably say something like 16832% |
05:09.44 | rpierce99 | usb state doesn't change either way, just plugged it back in with scbs running and it doesn't detect usb and start charging :) |
05:10.08 | jonpry | probably thinks its full |
05:10.28 | rpierce99 | well i don't get adb connection either, it doesn't even realize there's a usb connection |
05:10.36 | jonpry | hmm |
05:10.44 | rpierce99 | whatever is preventing it from disconnecting is also preventing it from connecting |
05:10.44 | jonpry | you think it got botched from the first unplug? |
05:11.09 | rpierce99 | bet if i kill scbs again it'll magically find the usb |
05:11.26 | jonpry | ok |
05:11.32 | jonpry | i hope not :p |
05:12.28 | rpierce99 | usbdbg right up, sorry dude |
05:12.36 | jonpry | hrm |
05:12.53 | jonpry | WisTilt2, any ideas? |
05:13.04 | rpierce99 | whatever is supposed to be monitoring the usb connection, it's like that thread gets hung |
05:13.16 | jonpry | thats possible |
05:13.27 | jonpry | i did bad things to htc_battery_smem |
05:13.29 | WisTilt2 | check dmesg and see if usb service died |
05:13.55 | WisTilt2 | oh, it came back on when you killed scbs |
05:14.06 | jonpry | well mostly i tried to turn that shit off when scbs is running, and i think it sets some userland crap about charging |
05:15.44 | jonpry | ok, think i found it |
05:15.53 | jonpry | new kernel? |
05:15.54 | rpierce99 | there is some stuff in here about usb, http://pastebin.com/gZPYSAYu |
05:16.31 | rpierce99 | meaning, ridiculous amounts of spammed usb errors :) |
05:16.41 | *** join/#htc-linux arrrghhh (~arrrghhh@c-71-237-40-111.hsd1.co.comcast.net) |
05:17.12 | WisTilt2 | brb, ice cream is calling |
05:17.14 | *** join/#htc-linux gassedup (gassed@c-76-30-161-228.hsd1.tx.comcast.net) |
05:18.09 | arrrghhh | oh sure, that's the first thing he says when i join. |
05:18.29 | rpierce99 | to be fair, I'd ditch you for ice cream too |
05:18.38 | arrrghhh | eh, that's fair |
05:18.46 | arrrghhh | would as well |
05:18.49 | jonpry | rpierce99, i put up a new kernel if you want to try it |
05:18.54 | rpierce99 | k |
05:19.56 | jonpry | hi arrrghhh |
05:20.06 | arrrghhh | how you doin jonpry |
05:20.45 | jonpry | rpierce99, is fixing my bugs :p |
05:21.02 | rpierce99 | finding != fixing :) |
05:21.04 | jonpry | cotulla couldn't figure it out either |
05:21.06 | *** join/#htc-linux _twitch (~burning_a@64.112.96.58.static.exetel.com.au) |
05:22.19 | jonpry | i think i am not doing something right with charge current |
05:22.39 | jonpry | i get numbers like 2.4 amps when hooked up to my laptop |
05:22.48 | jonpry | by everyone else says there number make sense |
05:23.53 | rpierce99 | jonpry: booting the new kernel now |
05:27.08 | rpierce99 | jonpry: that did it, sleeping like a baby now (while running scbs of course) |
05:27.19 | jonpry | cool |
05:27.25 | rpierce99 | i started it plugged in and it detected the disconnect |
05:27.36 | jonpry | :p |
05:27.55 | rpierce99 | and it detects the reconnect as well |
05:28.15 | jonpry | its just ugly |
05:28.22 | *** join/#htc-linux manekineko (~manekinek@newyork.homeserver.com) |
05:29.10 | rpierce99 | Battery Level: 235405% That will last me years! |
05:29.15 | jonpry | lol |
05:29.34 | jonpry | you have to divide by 64k |
05:29.44 | rpierce99 | aw thats no fun |
05:30.33 | jonpry | actually dividing by 64k will just give you the corrected voltage |
05:30.41 | jonpry | then you can plot it |
05:30.49 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
05:31.09 | *** join/#htc-linux goxboxlive (~jrs@mail2.hjellnesconsult.no) |
05:31.24 | jonpry | don't let it go below 222 822 |
05:32.00 | rpierce99 | otherwise it ends up like yours is right now? :P |
05:32.09 | jonpry | yeah :p |
05:33.28 | WisTilt2 | arrrghhh finally woke up huh? |
05:33.33 | rpierce99 | does this kernel have the relatively up-to-date panel collapse code, i can guesstimate what my drain is if it does |
05:33.40 | *** join/#htc-linux Kasjopaja23 (~Tina@p578FF556.dip.t-dialin.net) |
05:34.04 | arrrghhh | heh |
05:34.05 | jonpry | this all looks very good though. working daemon, in and out. just get a little data and battery should be super cool |
05:34.10 | arrrghhh | reading logs, about to go to bed in fact. |
05:34.17 | jonpry | rpierce99, its up to date on glemsom patches |
05:34.23 | jonpry | should have camera |
05:34.34 | arrrghhh | wanted to say people said if they disable data SoD goes away... |
05:35.12 | WisTilt2 | arrrghhh real quick. test ril is a few days away. sod is data related.... |
05:35.12 | rpierce99 | k, i shouldn't have a problem keeping it alive then, i know about how long it lasts, unless your code makes it drain significantly faster, which will be good to know either way |
05:35.26 | arrrghhh | cool, i can wait |
05:35.54 | WisTilt2 | problem in ril with data stream state during loss of signal or switching cells |
05:37.19 | arrrghhh | seems consistent with reports, for sure. |
05:39.17 | WisTilt2 | he has a list of problems related to call handling also that might be messing up audio routing but dont know all the details. wont be back at office until tomorrow to get all the details and look it over. |
05:39.27 | arrrghhh | ah |
05:39.31 | arrrghhh | have a good vaca? |
05:40.23 | WisTilt2 | yes, we stayed an extra day so 3 days in disneyland and california adventure about killed me:) had a great time though and grand kids are more worn out then the old man |
05:40.52 | rpierce99 | is jealous |
05:40.54 | WisTilt2 | need a vacation now to recoop though |
05:41.03 | arrrghhh | lol |
05:41.09 | arrrghhh | i had a fantastic vaca |
05:41.13 | rpierce99 | i really want to take my kids there, but the family would kill me if we didn't visit them all in seattle instead |
05:41.17 | arrrghhh | sucks being back in reality :P |
05:41.20 | WisTilt2 | no broken bones arrrghhh? |
05:41.25 | arrrghhh | not a one! |
05:41.28 | WisTilt2 | nice |
05:41.34 | arrrghhh | even got my dad to jump off a small cliff on the last day |
05:41.44 | arrrghhh | 6" powder day on the last day, it was f-ing fantastic. |
05:41.59 | WisTilt2 | doesnt get any better than that does it? |
05:42.06 | arrrghhh | nope, it really doesn't. |
05:42.57 | WisTilt2 | rpierce99 take them! their only kids for a short time |
05:43.40 | rpierce99 | WisTilt2: I know, but we can only take one vacation this year and we haven't visited their grandparents/aunts/uncles/cousins/great grandparents/etc in like 2 years |
05:43.55 | jonpry | rpierce99, i'm from seattle |
05:44.21 | WisTilt2 | yeah thats probably a good idea to visit them then. |
05:44.23 | rpierce99 | i'm originally from seattle, lived in Minneapolis for the last 4 years or so |
05:44.46 | jonpry | sort of anyways. i'm there right now |
05:45.15 | arrrghhh | so WisTilt2... i've had several reports from AUO panel users that battery life went down for them after the 2/28 kernel |
05:45.18 | arrrghhh | before the cam commits |
05:45.36 | arrrghhh | and of course their camera doesn't work, so there's issues with that... |
05:45.45 | arrrghhh | evidently none of them tested jb's kernel? i don't know. |
05:46.16 | WisTilt2 | nothing changed in my power stuff so could be all the other commits. |
05:46.16 | arrrghhh | my battery life has been fantastic on your latest 3/1 kernel. |
05:46.30 | arrrghhh | well they're saying that even before the cam stuff |
05:46.42 | arrrghhh | they have some kernel from 2/26 they're saying gives them the best batt |
05:46.53 | WisTilt2 | i ran my phone over 50hrs without charging at disneyland and still had just over 40% left |
05:47.02 | arrrghhh | damn... |
05:47.21 | arrrghhh | yea, my battery life has been ridiculous as well. not quite that ridiculous, but i use it quite a bit :P |
05:47.25 | WisTilt2 | when was jb's commits pushed? |
05:47.38 | arrrghhh | 2/28 i think? |
05:47.51 | arrrghhh | i mean he pushed a bunch of stuff and bzo broke it all down and actually committed it |
05:47.56 | arrrghhh | as i understand it |
05:48.02 | WisTilt2 | and these auo users were getting good life before correct? |
05:48.12 | arrrghhh | yea |
05:48.21 | arrrghhh | i swear there was an interim kernel |
05:48.25 | arrrghhh | before you merged the cam stuff |
05:48.48 | *** join/#htc-linux xawen (~xawen@pool-96-244-250-191.bltmmd.fios.verizon.net) |
05:48.59 | WisTilt2 | i think there some clock changes but all my last kernels are synced with git with all those commits so you'd think we'd see it in other devices also |
05:49.02 | arrrghhh | also blackstone users are complaining about 1258+ which is when that panel collapse code was committed. need some blackstone dev to tweak that crap. |
05:49.03 | *** join/#htc-linux sykosoft (455cd27d@gateway/web/freenode/ip.69.92.210.125) |
05:49.10 | sykosoft | anybody noticed we have patches from 10 and 20 years in the future? |
05:49.11 | sykosoft | http://gitorious.org/linux-on-qualcomm-s-msm |
05:49.27 | arrrghhh | sykosoft, there being saved for later |
05:49.34 | jonpry | and they same time travel isn't possible |
05:49.37 | arrrghhh | post-dated checks, etc. |
05:49.52 | WisTilt2 | hey, this is "futuristic" development isn't it? |
05:49.57 | arrrghhh | lol |
05:50.00 | sykosoft | laughs |
05:50.19 | sykosoft | netripper: awesome job on the irclog changes. very very fast now |
05:50.38 | WisTilt2 | panel collapse on blac isnt even running unless someone else added it. i only have it on rhod machine types |
05:51.00 | arrrghhh | huh |
05:51.06 | sykosoft | wistilt2: as an fyi, I get some completely reboots (htc splash) with gps on with your kernel. turn gps off, never happens, most recently released |
05:51.19 | WisTilt2 | unless blac has same panel type i dont know |
05:51.42 | WisTilt2 | sykosoft is that with my 3/1 kernel? |
05:51.48 | arrrghhh | WisTilt2, i don't even know if there are different blac's... they have the "same" size screen |
05:51.53 | jonpry | sykosoft, gps rebooting your phone is pretty common on all kernels no? |
05:51.55 | arrrghhh | sykosoft, never saw this in the forums :P |
05:52.21 | rpierce99 | jonpry: I think you're right, using gps for an extended time has always produced reboots for me |
05:52.30 | jonpry | i wrote lots of that pos |
05:52.41 | arrrghhh | lol |
05:52.49 | sykosoft | arrrghhh: you were talking about "android reboots" when installing software (multiple market downloads). I get the same, however, as near as I can tell, it's expected behavior, things get restarted if they don't respond in time |
05:52.51 | arrrghhh | entropy is trying to fix the 0,0,0 problem |
05:53.10 | jonpry | what is that? |
05:53.14 | arrrghhh | sykosoft, oic. multitasking just chokes the phone to a crawl |
05:53.25 | arrrghhh | jonpry, getting a "fix" and being placed off the coast of ghana |
05:53.27 | WisTilt2 | multiple downloads will be fixed with this ril |
05:53.30 | sykosoft | jonpry: I don't get them in the standard kernel (though to be honest, I haven't tested glemsom kernels in a while) |
05:53.41 | arrrghhh | WisTilt2, you're making some mighty promises :P |
05:53.50 | arrrghhh | can't wait to try this new RIL :D |
05:53.56 | jonpry | arrrghhh, its just trying to tell you where you want to be |
05:53.58 | hyc | ditto ;) |
05:54.04 | WisTilt2 | problem is the way data streams are handled |
05:54.04 | sykosoft | wistilt2: it seems to be I/O causing the system to bog down. (being a unix guy), looks like severe I/O wait, and so, it restarts I believe zygote |
05:54.05 | arrrghhh | jonpry, LOL |
05:54.30 | jonpry | better get nilfs |
05:54.39 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
05:54.40 | hyc | probably not a smart idea to bog down a poor SD card that way |
05:54.40 | arrrghhh | killall zygote cause some fun |
05:54.48 | sykosoft | I can sometimes replicate the behavior by pegging the cpu with multiple threads, sending process into a wait state and raising the "load average" |
05:55.18 | sykosoft | arrrghhh: yes, interesting behavior, if the userland restarts (zygote I'm assuming), data breaks |
05:55.29 | sykosoft | unless you disable it completely via settings, or reboot completely |
05:56.08 | arrrghhh | WisTilt2, dare i ask about cdma netloc...? :) |
05:56.17 | WisTilt2 | :) |
05:56.54 | sykosoft | as a curious question, what was the checkjni thing I saw mentioned? I heard tales that tiad8 got something right (by accident) about a setting? |
05:56.57 | WisTilt2 | guess you'll be the first to test to see if it works |
05:57.04 | arrrghhh | heh |
05:57.48 | arrrghhh | sykosoft, yea, in a sense. it speeds things up slightly. |
05:57.51 | arrrghhh | he found some old build.prop that had it disabled |
05:58.15 | sykosoft | interesting I guess |
05:58.17 | arrrghhh | just like he found some neopeek builds with that different libgles and gralloc |
05:58.36 | sykosoft | anybody running with jit turned on lately? |
05:58.41 | arrrghhh | most of the rest of the stuff he's done is retarded |
05:58.45 | arrrghhh | i did for a little bit |
05:58.57 | sykosoft | successfully or failfully? |
05:59.04 | arrrghhh | it was pretty successful |
05:59.10 | arrrghhh | but the same old bugs came back |
05:59.19 | arrrghhh | too much volume up or down, reboot within android |
06:00.14 | sykosoft | hmm, I wonder if I could track that one down |
06:00.28 | sykosoft | never seeing an actual list of bugs caused by jit, anyone have one? |
06:00.33 | sykosoft | I'd like to investigate them |
06:00.40 | arrrghhh | i guess JIT isn't optimized for our hardware |
06:00.52 | arrrghhh | and there's no support for it... |
06:01.06 | hyc | what do you mean no support? |
06:01.14 | arrrghhh | el goog |
06:01.45 | hyc | It seems to work ok on G1, except for the RAM requirement |
06:01.48 | arrrghhh | the folks that do most of the work on our system images? |
06:02.05 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
06:02.15 | arrrghhh | stine does all the dirty work heh |
06:02.16 | hyc | eh, whatever. most of the system images I run came from cyanogen |
06:03.03 | hyc | I was just in the midst of a git merge of cyan's 2.6.35 kernel with linux-msm-2.6.35 tree |
06:03.15 | jonpry | JIT doesn't work on armv5 |
06:03.27 | arrrghhh | i thought we were v6? |
06:03.31 | hyc | MSM7x are all armv6 |
06:03.49 | jonpry | armv6--novfp is not a targetable arch |
06:04.05 | hyc | ? |
06:04.14 | jonpry | so in practice only some msm7k can run armv6 |
06:04.38 | hyc | targetable by what, gcc? jvm? |
06:04.43 | jonpry | armv6 includes VFP by definition, and msm720* doesn't have it |
06:05.02 | jonpry | i guess by JIT |
06:05.07 | sykosoft | this link contains some interesting discussion |
06:05.08 | sykosoft | http://groups.google.com/group/android-platform/browse_thread/thread/a3c21bf230982b6e?pli=1 |
06:06.09 | jonpry | well, we had jit on for like 6 months. and then it got turned off, and half the bugs in bugtracker became unreproducible |
06:06.18 | arrrghhh | yea |
06:06.29 | arrrghhh | there were a ton of bugs closed with JIT disabled. |
06:06.43 | arrrghhh | stine & i just went romping thru the bugtracker |
06:06.54 | arrrghhh | there's probably a few left from it in fact. |
06:06.59 | arrrghhh | need to go thru bugs again... |
06:07.18 | arrrghhh | stine needs to add gingerbread to the build selection |
06:07.23 | jonpry | you guys can try to turn it on, but i won't be using it on my phone :p |
06:07.25 | arrrghhh | and maybe something other than frx01 :P |
06:07.38 | sykosoft | isn't the g1 armv5te? (non vfp) |
06:07.43 | hyc | all that says is the JIT is mostly useless |
06:08.12 | hyc | G1 is MSM7201 |
06:08.15 | hyc | (A) |
06:08.15 | jonpry | except when it counts |
06:08.25 | arrrghhh | and blows things up? |
06:08.27 | arrrghhh | lol |
06:08.36 | hyc | cat /proc/cpuinfo is mostly identical for my G1 and TP2 |
06:09.20 | hyc | ARMv6TEJ |
06:09.37 | WisTilt2 | nite guys, need sleep |
06:09.44 | arrrghhh | g'nite WisTilt2. |
06:09.49 | hyc | nite |
06:09.49 | rpierce99 | nite |
06:09.54 | jonpry | bye |
06:09.55 | WisTilt2 | jonpry how long before you sail away? |
06:10.02 | jonpry | mar 22 |
06:10.14 | WisTilt2 | we have lots of time. ok nite all |
06:10.33 | sykosoft | what is cat /proc/cpuinfo for the hero? |
06:10.45 | hyc | on the G1 jit just requires more RAM than we can spare |
06:12.10 | arrrghhh | JIT is bad juju on our tired old phones. |
06:12.29 | sykosoft | I refuse to believe that! |
06:12.37 | hyc | the smarter thing for Google to have done would have simply been to provide a bytecode compiler |
06:12.46 | hyc | and compile all apps to native code when they get installed |
06:13.01 | sykosoft | what about bytecode caching? never really looking into it, does it cache bytecode? |
06:13.15 | hyc | caching bytecode is pointless |
06:13.20 | hyc | you want to cache native code |
06:13.33 | sykosoft | all right |
06:13.34 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
06:14.57 | hyc | honestly. running the way we are right now is like running an OS written in BASIC. or Perl. |
06:15.30 | rpierce99 | hey, nibbles was awesome |
06:15.34 | EdLin | Perl is an OS |
06:15.41 | sykosoft | I preferred gorilla |
06:15.47 | hyc | but it's not a *fast* one ... |
06:15.51 | sykosoft | question |
06:16.14 | sykosoft | were there jit changes in gingerbread? just curious |
06:16.17 | EdLin | some CPAN "apps" for the Perl "OS" are mostly native code. ;-) |
06:16.38 | hyc | yes, because doing it in pure perl would be insanely slow |
06:16.38 | sykosoft | http://code.google.com/p/android/issues/detail?id=10206 claims a fix (not really related) for armv5te-vfp made it into their internal tree |
06:16.44 | sykosoft | I HATE perl |
06:17.14 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
06:17.22 | hyc | and while the jvm runs on top of compiled C libraries, most of the apps are pure java |
06:17.25 | hyc | equally slow |
06:17.39 | sykosoft | I "used to" hate java |
06:17.52 | EdLin | sykosoft, I don't particularly love Perl, but I kind of hate Java - but I like Android anyway. ;-) |
06:17.54 | sykosoft | however, even I must admit that (on desktop) it's evolved somewhat, and is faster |
06:18.05 | hyc | lol |
06:18.28 | hyc | your base CPU is something like 2000 times faster today than 5 years ago |
06:18.42 | sykosoft | but, to be honest, I also am not a big fan of objective-c |
06:18.43 | hyc | your java desktop is .. 30% faster than 5 years ago? |
06:19.07 | sykosoft | actually, (we tested this, I'm a server guy, so, tomcat, etc), same system, different versions of the jre |
06:19.20 | EdLin | hyc, but if you don't know what the underlying hardware is like, and many Java jockies don't, you'll never write decent code - in any language. That's what I don't like about Java. |
06:19.22 | hyc | IMO the tradeoff is not worth it. |
06:19.30 | sykosoft | there are legitimate speed increases |
06:19.55 | arrrghhh | crap what if my laptop is 5 years old :/ |
06:19.57 | hyc | edLin: agreed, most of thos folks should never have taken up programming |
06:20.08 | EdLin | true. |
06:20.51 | sykosoft | I'm amused by people that try to solve everything with python (see it in the server world) |
06:21.08 | hyc | heh yeah, it seems to be the new perl |
06:21.40 | hyc | I've had "write an embedded FORTH engine" on my project todo list for a couple years |
06:21.51 | sykosoft | and I feel the same about ruby. though ruby seems to have lost whatever charm it once had. 4-5 years ago, it was t3h hotness |
06:22.35 | sykosoft | ah the days of setting up mongrel servers |
06:22.39 | hyc | I must've slept thru ruby, never bothered to learn it |
06:22.58 | hyc | and apparently didn't miss anything ;) |
06:23.02 | sykosoft | you didn't miss much. super slow compared to other options. fast to develop, slow to execute |
06:23.11 | hyc | uh huh |
06:23.12 | sykosoft | activerecord was nice, but much slower than other options |
06:23.57 | hyc | it all makes sense from a software company shareholder's perspective. They're paying directly for software developer time. only their customers pay for execution time. |
06:24.13 | sykosoft | sure. |
06:24.23 | sykosoft | however, it was in use at a lot of startups (again, the "hotness") |
06:24.29 | sykosoft | I even worked for one a few years back |
06:24.31 | sykosoft | all ruby |
06:24.34 | sykosoft | ridiculous |
06:24.38 | hyc | lol |
06:24.57 | *** join/#htc-linux MassStash (~MassStash@c-67-175-41-173.hsd1.il.comcast.net) |
06:24.58 | sykosoft | I find php to have great strengths in the webapp front |
06:25.08 | sykosoft | and any c derivative on the system space |
06:25.19 | sykosoft | and of course asm for embedded or other low level reasons |
06:25.52 | hyc | I think the typical mix of C/asm is appropriate for embedded and system both |
06:26.15 | hyc | php ... very buggy, tons of security holes inherent to the interpreter |
06:26.27 | sykosoft | one thing I find odd, while OO programming is great for some things, I get annoyed when an OO programmer crams it into every problem |
06:26.52 | sykosoft | also, this'll sound weird, but I love javascript |
06:27.35 | hyc | I've started to see some value in javascript ... |
06:28.55 | EdLin | javascript is a nice language, it's the DOM that's a problem. |
06:30.13 | sykosoft | I was mostly speaking of the language |
06:30.18 | sykosoft | it's very capable |
06:31.16 | EdLin | yeah, and lately it really performs well. For a long time it was quite slow, then web2.0 came around and chrome/webkit lit a fire under everyone's rear end in the browser field. |
06:31.29 | hyc | long overdue |
06:31.47 | sykosoft | absolutely |
06:31.53 | hyc | both IE and mozilla are bloatware |
06:32.00 | hyc | Opera had no impact, oh well |
06:32.03 | sykosoft | I pretty much can't stand firefox |
06:32.08 | sykosoft | I'll use IE8 over firefox |
06:32.14 | sykosoft | and at 1/10th the ram usage |
06:32.18 | EdLin | I use firefox, only because I like certain add-ons. |
06:32.32 | sykosoft | I use chrome pretty much exclusively except for certain things |
06:32.41 | sykosoft | like juniper firewalls, and devices which don't work right otherwise |
06:35.35 | *** join/#htc-linux xawen (~xawen@pool-96-244-250-191.bltmmd.fios.verizon.net) |
06:38.39 | *** join/#htc-linux cazh_ (~quassel@3007ds2-rd.0.fullrate.dk) |
06:49.25 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d8793b7.pool.mediaWays.net) |
07:00.55 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@82.76.236.36) |
07:01.26 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
07:07.00 | *** join/#htc-linux AgentBlair (~AgentBlai@adsl-67-124-200-190.dsl.sndg02.pacbell.net) |
07:11.44 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
07:25.06 | *** join/#htc-linux MacDrunk (~marper@201.165.118.194) |
07:25.53 | *** join/#htc-linux MacMiller (~marper@201.165.118.194) |
07:26.26 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
07:41.57 | *** join/#htc-linux MacDrunk (~marper@201.165.118.194) |
07:43.38 | *** join/#htc-linux MassStash (~MassStash@c-67-175-41-173.hsd1.il.comcast.net) |
07:58.05 | *** join/#htc-linux kiozen (~kiozen@p5DDF18C9.dip.t-dialin.net) |
08:01.29 | MassStash | stuck in first fukin full nand dead battery loop O' death..... |
08:02.07 | MassStash | i mean FFNDBLO'DEATH............ |
08:20.12 | *** join/#htc-linux Drakh_ (Drakh@190.42.40.105) |
08:36.53 | *** join/#htc-linux rob_w (~bob@ppp-188-174-65-152.dynamic.mnet-online.de) |
08:38.05 | *** join/#htc-linux t3g (~kvirc@p3E9E1D4C.dip.t-dialin.net) |
08:40.47 | *** join/#htc-linux kvaster (~kvaster@93.84.112.80) |
08:47.41 | *** join/#htc-linux NetRipper (~netripper@tikkie.net) |
08:57.46 | *** join/#htc-linux TheSarge (~sarge@c-24-22-74-69.hsd1.or.comcast.net) |
09:00.50 | *** join/#htc-linux SG_Away (~Samsunguy@cpe-76-186-50-40.tx.res.rr.com) |
09:06.59 | *** join/#htc-linux dekar_ (~dekar@95.143.165.210) |
09:12.46 | *** join/#htc-linux DuperMan (~Duper@46-116-34-25.bb.netvision.net.il) |
09:22.09 | nizox | 2/g 11 |
09:22.14 | nizox | sry |
09:23.07 | *** join/#htc-linux DuperMan (~Duper@46-116-34-25.bb.netvision.net.il) |
09:27.12 | *** join/#htc-linux Rob2222 (~Miranda@p4FFF16AB.dip.t-dialin.net) |
09:37.10 | *** join/#htc-linux camro (~camro@89-104-29-101.customer.bnet.at) |
09:53.22 | *** join/#htc-linux |Atom| (~atom@82.194.234.249) |
10:05.37 | *** join/#htc-linux tyween (~tyween@pool-71-163-117-57.washdc.fios.verizon.net) |
10:17.19 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@82.76.236.36) |
10:25.40 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@82.76.236.36) |
10:29.36 | *** join/#htc-linux tyween` (~tyween@pool-71-163-117-57.washdc.fios.verizon.net) |
10:56.14 | *** join/#htc-linux kvaster (~kvaster@leased-line-93-125-0-84.telecom.by) |
11:16.15 | *** join/#htc-linux gauner1986 (~Miranda@p508C6FDA.dip.t-dialin.net) |
11:29.25 | *** join/#htc-linux Pr0z (Pr0z@bzq-84-109-110-248.red.bezeqint.net) |
11:44.38 | *** join/#htc-linux kernelzilla (~patrick@174-26-68-63.phnx.qwest.net) |
11:50.11 | *** join/#htc-linux Quilck (~Quilck@195.113.165.82) |
12:04.16 | *** join/#htc-linux D3tul3 (~Oliver@cpe-174-109-223-235.nc.res.rr.com) |
12:08.04 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host226-134-dynamic.25-79-r.retail.telecomitalia.it) |
12:18.54 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
12:40.12 | *** join/#htc-linux imilka (~kvirc@95-27-253-33.broadband.corbina.ru) |
12:41.57 | *** join/#htc-linux LordDeath (~Lord|Lapt@cable-81-173-166-52.netcologne.de) |
12:42.35 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
12:43.10 | *** join/#htc-linux tiky_ (~tika@62.16.86.2) |
13:18.39 | *** join/#htc-linux [Rapunzel] (~opera@nat004-252-205-109.tvoe.tv) |
13:28.31 | *** join/#htc-linux daevoq (~dae@host141-105-dynamic.56-79-r.retail.telecomitalia.it) |
13:35.22 | *** join/#htc-linux Rajko (~Rajko@2001:470:1f0b:728:18dc:94d6:85ca:be4f) |
14:06.54 | *** join/#htc-linux crawling (~crawling@a94-132-172-247.cpe.netcabo.pt) |
14:10.06 | *** join/#htc-linux Ceesheim (~ceesheim@p508DEAF3.dip.t-dialin.net) |
14:23.51 | *** join/#htc-linux _twitch (~burning_a@64.112.96.58.static.exetel.com.au) |
14:24.39 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
14:30.54 | *** join/#htc-linux rpierce99 (~rpierce99@71-82-139-28.dhcp.roch.mn.charter.com) |
14:31.58 | *** join/#htc-linux Ceesheim (~ceesheim@p508DEAF3.dip.t-dialin.net) |
14:33.15 | *** join/#htc-linux Ceesheim (~ceesheim@p508DEAF3.dip.t-dialin.net) |
14:39.09 | *** join/#htc-linux mitsutaka (~mitsutaka@p1227-ipbf3907marunouchi.tokyo.ocn.ne.jp) |
15:03.45 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
15:14.04 | *** join/#htc-linux Erikson (~Erik@i5E86D9E6.versanet.de) |
15:22.16 | *** join/#htc-linux pepermint (~pepermint@host11-86-dynamic.5-87-r.retail.telecomitalia.it) |
15:22.18 | pepermint | hi |
15:26.22 | pepermint | I have an ipaq h1940, I compiled angstrom for it, |
15:26.35 | pepermint | but the zImage doesn't boot with haret, I've a black screen and no way to see printk messages |
15:26.55 | pepermint | s/black/white |
15:26.58 | pepermint | I eared about ramconsole, but I don't know how to use it |
15:27.26 | pepermint | s there anyone that knows how to use haret? |
15:28.01 | hyc | I think haret has a limit of about 160K for the size of the kernel image |
15:28.42 | hyc | a couple of my recent kernels failed to boot until I shrunk them... |
15:29.17 | pepermint | my image is about 2mb |
15:29.39 | hyc | erfe, I meant 1.6MB |
15:29.57 | hyc | 2MB is definitely too large |
15:30.07 | hyc | throw out some drivers, make them into loadable modules |
15:30.14 | hyc | use LZMA instead of gzip |
15:30.19 | [Rapunzel] | for me 2.2Mb loaded via hared nice |
15:30.48 | hyc | mebbe it depends on the device and its memory map |
15:31.12 | GNUtoo|laptop | lzma can get you under 2M with a lot of driver in the kernel |
15:31.16 | gauner1986 | hey [Rapunzel] |
15:31.22 | [Rapunzel] | hey Gau |
15:32.40 | dcordes | hey Gau, punzel, others |
15:40.54 | [Rapunzel] | hey |
15:40.55 | [Rapunzel] | :D |
15:51.20 | hyc | was looking over the diff between linux-msm-2.6.35 and cyanogen's dream/sapphire 2.6.35. anyone know why usb initialization is almost but not exactly the same? |
15:51.28 | hyc | I would have epxected it to be exactly the same |
15:51.57 | [Rapunzel] | because it's different in the every kernel. it's tradition. keep it! :) |
15:52.03 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
15:52.05 | hyc | :P |
15:52.38 | hyc | I hate slogging thru this mess of diffs |
15:58.04 | *** join/#htc-linux Quilck (~Quilck@90.183.82.215) |
16:02.02 | *** join/#htc-linux MassStash (~MassStash@c-67-175-41-173.hsd1.il.comcast.net) |
16:09.37 | *** join/#htc-linux rpierce99_ (~rpierce99@71-82-139-28.dhcp.roch.mn.charter.com) |
16:13.53 | *** join/#htc-linux ftoz (~root@cst-prg-29-251.vodafone.cz) |
16:27.36 | *** join/#htc-linux Th0mas_ (~Th0mas@211.98.191.90.dyn.estpak.ee) |
16:28.43 | *** join/#htc-linux JustLiving (~Quilck@90.183.82.215) |
16:39.12 | *** join/#htc-linux NeoMatrixJR_Mobi (~NeoMatrix@173.158.1.211) |
16:40.57 | *** join/#htc-linux Drakh_ (Drakh@190.42.40.105) |
16:41.01 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless251.wirelesstcp.net) |
16:43.53 | hyc | dunno if this was already known, but found an MSM7201A hardware reference online |
16:43.59 | hyc | http://wenku.baidu.com/view/646454f80242a8956bece44e.html |
16:44.14 | hyc | pinouts and functional overview |
16:44.52 | *** join/#htc-linux JesusFreak316 (~JesusFrea@pool-173-65-69-136.tampfl.fios.verizon.net) |
16:50.59 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-18-145-141.client.mchsi.com) |
16:55.40 | jonpry | Hi WisTilt2 |
16:57.00 | NeoMatrixJR_Mobi | Hey WisTilt2! What's new? |
16:57.01 | WisTilt2 | Hey jonpry. so how's the batt stuff working now after last night? |
16:57.26 | WisTilt2 | NeoMatrixJR_Mobi same old same old |
16:57.37 | jonpry | I passed out last night after you got off |
16:57.38 | *** join/#htc-linux arif-ali (~arif-ali@ip-81-23-53-226.ask4internet.com) |
16:58.04 | NeoMatrixJR_Mobi | Jonpry...that didn't come out right.... |
16:58.11 | jonpry | lol |
16:58.32 | jonpry | *off of IRC |
16:59.03 | WisTilt2 | im at the office all day so going to play with the ril and see what my lead radio guy came up with so far. |
16:59.29 | jonpry | sounds good. i think something is wrong with the charge currents in smem |
16:59.36 | jonpry | am i doing this wrong? |
16:59.50 | *** join/#htc-linux joshkoss (~android@192.234.2.49) |
17:00.02 | jonpry | do you have a rig for measuring actual current into the phone? |
17:00.04 | rpierce99 | WisTilt2: did he start over or just completely overhaul |
17:00.37 | jonpry | one of those ghetto electrician inductor things would do it |
17:00.39 | WisTilt2 | jonpry yes we can measure that via a modded charger we have with a fluke in line |
17:00.58 | jonpry | ah, have you compared that to the raw value in smem? |
17:01.13 | WisTilt2 | rpierce99 starting from scratch pretty much. pulling out good code from existing |
17:01.23 | jonpry | cause i get 2.4 amps when plugged into my laptop |
17:02.01 | WisTilt2 | no but i can try that and see what we get. aren't you seeing the same numbers i was getting? how you getting 2.4a value? |
17:02.22 | hyc | how can you, USB port only gives 500mA |
17:02.47 | jonpry | buffer->batt_current = batt_32->batt_charge; |
17:03.10 | jonpry | or 16, whatever it is |
17:03.11 | WisTilt2 | did you try 16bit? |
17:03.28 | jonpry | i think its on 16 |
17:03.30 | WisTilt2 | when i sent you those logging tables that was using 16bit |
17:03.47 | jonpry | thats not the problem :p |
17:04.11 | jonpry | trouble is that readings are like 2400 |
17:04.25 | *** join/#htc-linux [acl] (~abel@96.246.167.90) |
17:05.28 | jonpry | there is that thing that says "Convert readed value to mA" |
17:05.42 | jonpry | but i don't understand how it was derived |
17:05.47 | WisTilt2 | my readings were under 500 with the 500ma charger and up around 900ma with the 1amp charger |
17:07.04 | [acl] | MassStash: yo.. i just saw ur post.. shit sounds like its possessed |
17:07.05 | jonpry | were those raw readings or run through the correct? |
17:07.23 | WisTilt2 | mine were just raw from smem |
17:08.51 | jonpry | hrm, maybe battery_smem is correcting them to the wrong values |
17:08.56 | *** join/#htc-linux Alex[sp3dev] (~alexander@ip-95-220-12-212.bb.netbynet.ru) |
17:09.02 | WisTilt2 | your code shifts 16bits then divides by 1000 so that would give you 2.4 so what do you do with the 2.4 number after that? |
17:09.35 | jonpry | when it gets to userland it gets converted to float and logged |
17:10.06 | WisTilt2 | are you seeing that 2400 value change or is it stuck there |
17:10.13 | jonpry | it moves around |
17:10.19 | jonpry | and goes to zero when i unplug |
17:11.00 | *** join/#htc-linux Jhinta (~Jhinta@s529c116e.adsl.wanadoo.nl) |
17:11.20 | WisTilt2 | what smem addy you reading charge from? |
17:11.52 | jonpry | the right one |
17:12.06 | jonpry | its all being done in htc_battery_smem |
17:12.21 | MassStash | [acl], yeeeea man.... |
17:12.35 | jonpry | which i think is the problem. it really is applying the correction to the raw values |
17:12.41 | [acl] | MassStash: weirdness bro.. go back to winmo :-p |
17:13.19 | MassStash | cant |
17:13.20 | MassStash | how? |
17:13.39 | MassStash | charge phone |
17:13.44 | MassStash | gains charge enough to boot |
17:13.49 | MassStash | stoooooooooooooops fucking chargeing |
17:13.53 | MassStash | then dies |
17:14.02 | MassStash | ????????/ |
17:14.14 | [acl] | MassStash: dang.. get some holy water.. no idea.. |
17:14.20 | MassStash | fuuuuuuuk |
17:14.54 | MassStash | last time this happened i held bootloader til it booted but this full nand just turns the chargeing light off instead of taking me to bootloader |
17:15.04 | jonpry | WisTilt2, ok scratch that, not applying correction. maybe yours is corrected? |
17:15.11 | MassStash | i can get into replimenu, but is there any option there thatd help me? |
17:15.45 | MassStash | never even check out replimenu yet til now |
17:16.04 | MassStash | clear storage just formats partitions... no use |
17:16.40 | WisTilt2 | jonpry: im looking through my code and the only thing im doing is reading smem so maybe its corrected already. |
17:17.06 | *** join/#htc-linux Pr0z (Pr0z@bzq-84-109-110-248.red.bezeqint.net) |
17:17.22 | jonpry | http://pastebin.com/Qfg9u6dZ |
17:17.32 | jonpry | how did they come up with this? |
17:17.46 | MassStash | duuuude wtf, go into replimenu, i have like 30s before itll die. instead, i just pulled the bat assuming there would still be the lil charge it took to boot on the battery. put back in, nothing. |
17:17.46 | *** join/#htc-linux emwe (~emwe@cable-86-56-10-158.cust.telecolumbus.net) |
17:17.51 | [acl] | MassStash: why u worried bout replimenu. get ur phone booting before anything. you may need to mtty into it see whats up |
17:18.17 | emwe | heyho |
17:18.31 | MassStash | was hopeing htere was a replimenu option to go to friggin bootloader or something. task29 it from replimenu would work as well |
17:18.31 | Alex[sp3dev] | emwe: hi. how goes it? |
17:18.41 | MassStash | how can i mtty a dead phone? |
17:19.02 | MassStash | this doesnt happen to anyone else? cuz nates form just says what everyones trying to help me out with |
17:19.03 | emwe | Alex[sp3dev]: just back from shopping. catching up on pm comments. investigating |
17:19.07 | emwe | Alex[sp3dev]: what are you up to? |
17:19.22 | MassStash | let charge for 5 minutes then bla bla, well mine AUTOBOOTS, sooo strange |
17:19.43 | Alex[sp3dev] | emwe: ow. you've been shopping for like 2 weeks |
17:19.49 | MassStash | hmmmmmmmmm |
17:20.20 | emwe | Alex[sp3dev]: i do have a real life :P |
17:20.30 | Alex[sp3dev] | emwe: traitor |
17:20.39 | emwe | Alex[sp3dev]: was worth a try :) |
17:21.09 | Alex[sp3dev] | emwe: aren't you afraid to get addicted? |
17:21.15 | WisTilt2 | jonpry: I have no idea but looks like its different for each device. so smem has those corrected values? |
17:21.30 | jonpry | no |
17:21.31 | emwe | Alex[sp3dev]: i already am i think. |
17:21.48 | jonpry | the battery_info struct in htc_battery_smem has corrected values |
17:22.01 | Alex[sp3dev] | emwe: it is fine here. well, bt, wifi are still unpwned.. but jb has finally reimplemented htc acoustic for wince devices. i have not commited this stuff for 35, it is a WIP. but no more hacks in snd.c |
17:22.12 | MassStash | so uh yea, pretty sure i've exasperated all options here without another phone or battery.... anyone else got an idea/? |
17:22.27 | Alex[sp3dev] | MassStash: doesn't it enter the bootloader? |
17:22.43 | MassStash | not how im trying |
17:22.47 | emwe | Alex[sp3dev]: yah, watched his commits. just that little time factor. ;) |
17:23.00 | Alex[sp3dev] | MassStash: tried the volume-power combo? |
17:23.04 | MassStash | ill sit here for like 3-5 just holding power and vol down, instead of booting to bootloader |
17:23.13 | MassStash | the charge light turns off |
17:23.18 | MassStash | and stays off until i let go |
17:23.21 | MassStash | charge light on |
17:23.24 | WisTilt2 | so you're getting those corrected values. after the dex call, just read the smem addy and you will get the raw value. thats all i did for that logging test |
17:23.58 | MassStash | if you pull out, light off. if you wait it vibrates into droid nand limbo whatever, and continues the cycle |
17:24.00 | jonpry | hrm |
17:24.29 | jonpry | WisTilt2, i am getting raw values |
17:24.44 | MassStash | i can watch it get to A N D R O I D roughly, then die |
17:24.49 | WisTilt2 | 2400? highest ive ever seen is around 900 |
17:24.50 | MassStash | and replimenu for bout 30s |
17:25.14 | [acl] | MassStash: dood... like i said dont worry about android |
17:25.16 | Alex[sp3dev] | MassStash: yep, the bootloader expects the kernel to either charge or update smem reset flag. well. you need to charge the battery then.. buy a cheap external charger or cut usb wire ;) |
17:25.30 | [acl] | MassStash: actually forget about it .. get back to a stable boot process |
17:25.32 | Alex[sp3dev] | MassStash: but if it boots to android.. let it cycle until it boots. |
17:26.39 | MassStash | dies at A N D R O I D roughly |
17:26.52 | jonpry | WisTilt2, we will check rpierce99 logs, then maybe you can run my code and see if you get your numbers or mine |
17:27.09 | rpierce99 | jonpry: do you want it now? |
17:27.10 | MassStash | [acl], at this point i'm very upset with nandroid, so winmo would be "fresh air" at this point... |
17:27.31 | jonpry | rpierce99, have you been on a charger at any point? |
17:27.35 | WisTilt2 | jonpry, sounds good. ill test it on the phone with the fluke in line so we can see some real numbers to compare |
17:27.40 | rpierce99 | all night |
17:27.40 | [acl] | MassStash: you should.. what you are experiencing isnt normal. So make sure ur back in winmo just fine |
17:28.02 | MassStash | this happened to me with partial nand as well man |
17:28.05 | jonpry | rpierce99, yeah please get /sdcard/scbs.log |
17:28.57 | [acl] | MassStash: you make it sound like its a solid thing and it cant fail..lol.. but right now we are in the middle of so much its tough to even debug your issue. So i want to make sure you can at east go back to winmo |
17:29.07 | MassStash | so the auto boot is what's anonylitacal? |
17:29.25 | MassStash | for sure |
17:30.02 | MassStash | well i just need a different charged battery or put my phone on ext charge or in other phone to charge |
17:30.08 | jonpry | when will they learn |
17:30.31 | MassStash | baaaasically, at this point nand now has a disclaimer as to NEVER LET BAT DIE COMPLETELY lol |
17:30.37 | rpierce99 | jonpry: http://pastebin.com/qNTZ1jf1 |
17:30.56 | rpierce99 | oh i bet an upload would be better huh |
17:31.02 | jonpry | thats fine |
17:31.19 | MassStash | what is it that makes vibrate about 70s after plugging in charger? |
17:31.41 | MassStash | im attempting this all chargeing by wall not pc as well |
17:31.49 | MassStash | annnnnnooooommmmmmmyllllllyyyyy |
17:32.16 | jonpry | hmm. .5 amps |
17:32.40 | [acl] | MassStash: yeah we have that disclaimer |
17:32.41 | [acl] | loll |
17:32.56 | MassStash | it is a lie tho |
17:33.04 | MassStash | says your not fucked when it happens lol |
17:33.13 | MassStash | you're* |
17:33.22 | [acl] | haha |
17:33.33 | jonpry | rpierce99, did you just plug or unplug it at the very end? |
17:33.35 | [acl] | MassStash: ok so try to go back to winmo.. do whatever it takes.. |
17:33.41 | MassStash | thank goodness for battery swap.... muuuuuhaaaaaahahahaha ha ha ha ha haaaaaa |
17:33.45 | rpierce99 | just plugged it into my laptop at the end to adb |
17:33.52 | jonpry | 3.421005 amps! |
17:34.08 | MassStash | right wont be able o til 5ish when i got to work at mall with a us cell kyosk.... |
17:34.21 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
17:34.53 | arrrghhh | WisTilt2, read the logs. let me know if you have anything for me to play with ;) |
17:35.18 | MassStash | FFNDBL of death.... bummer |
17:35.34 | jonpry | its almost like its just off by a factor of 10 |
17:35.43 | arrrghhh | MassStash, you can't get the battery to charge while it's off? |
17:35.45 | MassStash | arrrghhh, you read this shit that happened to me? lol |
17:35.48 | arrrghhh | yea |
17:35.49 | MassStash | lolol |
17:35.55 | MassStash | right |
17:35.58 | arrrghhh | it should charge when it's off tho |
17:36.00 | arrrghhh | no? |
17:36.02 | MassStash | dead. |
17:36.03 | jonpry | MassStash, buy a new battery, there like a dollar |
17:36.06 | [acl] | nand made an example out of you |
17:36.06 | MassStash | charges |
17:36.10 | arrrghhh | lol |
17:36.18 | arrrghhh | nand can do that |
17:36.19 | MassStash | boots AUTOMATICALLY |
17:36.21 | MassStash | wtf? |
17:36.25 | arrrghhh | made an example out of wozz |
17:36.31 | WisTilt2 | arrrghhh: not nearly ready, lots to finish. Also, on getting logs with my kernel... you can have people go into console and save dmesg to sdcard. dmesg > /sdcard/log.txt or whatever name. |
17:36.33 | arrrghhh | MassStash, it'll do that sometimes. did you follow the directions in the thread? |
17:36.35 | MassStash | riiiiight |
17:36.35 | [acl] | taught wozz a lesson |
17:36.47 | *** join/#htc-linux |Jeroen| (~jeroen@d5152B25B.access.telenet.be) |
17:36.56 | arrrghhh | WisTilt2, well yea. i mean historical logs. or are you talking about something different? |
17:37.01 | MassStash | pretty sure my procedure was the same but ill double verify that arrrghhh |
17:37.19 | arrrghhh | MassStash, basically keep it plugged in when you pull the battery. |
17:37.21 | WisTilt2 | no, just dmesg so any lockup would not be possible |
17:37.24 | arrrghhh | you just need to charge it before it boots. |
17:37.26 | MassStash | dont buy batterys, use us cell's craziness |
17:37.41 | arrrghhh | WisTilt2, for what tho? just auo whiners in general? i always get mixed reports from those fools. |
17:37.51 | MassStash | how do you suggest i charge it before it auto boots arrrghhh? |
17:38.00 | [acl] | arrrghhh: haha those fools |
17:38.01 | [acl] | :-p |
17:38.02 | arrrghhh | MassStash, l_miller laid it out basically. |
17:38.11 | arrrghhh | [acl], i know it. i don't have a single good tester in the lot :P |
17:38.20 | [acl] | do what i did |
17:38.23 | WisTilt2 | just in general if we need to see a condition that doesnt lock things up totally. |
17:38.25 | [acl] | ignore em :-p |
17:38.31 | arrrghhh | was hoping F22 could help with his mad ES phone |
17:38.43 | arrrghhh | WisTilt2, oh yea. no worries there, i know about that ;) |
17:40.46 | MassStash | who's the fools.....? |
17:41.39 | MassStash | arrrghhh, can't get to bootloader and my shit auto boots. thanks tho brudda. [acl], thank you as well |
17:42.11 | arrrghhh | MassStash, so you have it plugged into AC. you pull the battery - still plugged in. can you power it on? |
17:42.27 | MassStash | nah |
17:42.58 | [acl] | MassStash: maybe need to charge ur batt externally somehow and and get to mtty.. ur only hope |
17:43.25 | MassStash | yea, ima battery swap later when i go work |
17:43.30 | [acl] | nice |
17:43.37 | MassStash | riiiiight |
17:43.55 | MassStash | fuk it, no phone til 5 but brand new fully charge battery for free.99 |
17:43.56 | MassStash | business |
17:44.08 | MassStash | k, well i'm useless for now, so peace guys |
17:45.03 | F22 | what's the issue with the 100's? |
17:45.03 | arrrghhh | yea, definitely never let battery die completely :P |
17:45.07 | arrrghhh | F22, they suck. |
17:45.11 | F22 | lol |
17:45.14 | F22 | besides that |
17:45.24 | Alex[sp3dev] | arrrghhh: wtf? that was my thought! you stole it! |
17:45.25 | arrrghhh | lots of peoples whining about crap not working with them |
17:45.27 | arrrghhh | because they never test. |
17:45.27 | [Rapunzel] | such effects caused by missing licensed MAGLDR copy on the phone :D |
17:45.31 | WisTilt2 | jonpry: if you're interested in the direct smem addy im using, it's MSM_SHARED_RAM_BASE + 0xfc144 for charge current. dex call to PCOM_GET_BATTERY_DATA then read 16bit at that addy that is all im doing. just ran my logging again on a 1amp charger and see around 880 value there, fluke shows 840ma +- 10ma. |
17:45.43 | arrrghhh | Alex[sp3dev], lol y'know what they say... horrible minds think alike. |
17:45.47 | arrrghhh | is that what they say? meh. |
17:46.34 | jonpry | seems like i have had this battery problem before |
17:46.43 | arrrghhh | [Rapunzel], we're not using MAGLDR |
17:46.51 | *** join/#htc-linux L_miller (~IceChat7@bs.americas.lc.americanstandard.com) |
17:47.12 | [acl] | we need to sacrifice more souls to the nand gods.. |
17:47.14 | jonpry | iirc plug in with battery out. then insert it, and it won't turn on |
17:47.22 | arrrghhh | L_miller, come join the party. |
17:47.29 | arrrghhh | [acl], lol will that make nand more complete? |
17:47.35 | F22 | arrrghhhh: that doesn't give me a sense of how grabbing a log from my es 210 might be helpful. :P |
17:47.41 | Alex[sp3dev] | [acl]: poopify the LK now that you're happy with nand while i'm working on 35 |
17:47.43 | stinebd | jonpry: i believe that's what i did too when it happened to me |
17:47.55 | [Rapunzel] | it was joke :D |
17:48.00 | L_miller | what have I missed/ |
17:48.03 | arrrghhh | makes sense, i had it backwards. |
17:48.12 | arrrghhh | L_miller, you single-handedly bricked MassStash's phone. |
17:48.19 | stinebd | and then i eventually just swapped the battery out because i remembered i have two rhods |
17:48.26 | L_miller | Nahh... It's not bricked. |
17:48.39 | arrrghhh | i know, but he's having seizures. |
17:48.44 | [acl] | Alex[sp3dev]: i just started to do a recovery so i need to wait till thats done.. but maybe soon.. |
17:48.50 | [acl] | Alex[sp3dev]: how far u get in LK ? |
17:48.53 | L_miller | MassStash did you do what I said? |
17:49.02 | *** join/#htc-linux DuperGhost (~Duper@85-250-16-158.bb.netvision.net.il) |
17:50.30 | Alex[sp3dev] | [acl]: i didn't touch it since we started 35 stuff in february. basically, i have reimplemented fb console (for kovs which has 180 degrees rotated screen) and done some stuffs. but i still need to clean up the fastboot code to allow us to separate usb code from it and add keyboard and charger support |
17:51.52 | [acl] | Alex[sp3dev]: nice nice |
17:52.41 | [acl] | if we can just figure out how to get rich i can quit my job to do this full time |
17:52.59 | [acl] | maybe i need to play the lottery |
17:54.25 | arrrghhh | [acl], there's some fellow in nigeria that is holding 422 million for me |
17:54.34 | jonpry | lol |
17:54.39 | arrrghhh | i just need to give him 422,000 |
17:55.15 | jonpry | we could all make a phone and sell it |
17:55.27 | Alex[sp3dev] | jonpry: what about prypad? |
17:55.46 | jonpry | working on it. my last prototype got lost in the mail :( |
17:55.54 | [acl] | wtf .. lost in the mail? |
17:56.01 | Alex[sp3dev] | too much paper spam |
17:56.05 | jonpry | http://trkcnfrm1.smi.usps.com/PTSInternetWeb/InterLabelInquiry.do?origTrackNum=LC810323529US |
17:56.09 | fakker | fui |
17:56.11 | [acl] | jonpry: like that phone tht was sent to you a while back huh |
17:56.12 | dcordes | jonpry: http://en.wikipedia.org/wiki/Openmoko#Golden_Delicious_GTA04_Board |
17:56.40 | *** join/#htc-linux JustLiving (~Quilck@90.183.82.215) |
17:57.21 | Alex[sp3dev] | dcordes: by the time it is finished, i think we'd be running omap6 |
17:57.37 | jonpry | i like this. http://www.opensourcemid.org/ |
17:58.02 | dcordes | http://lists.openmoko.org/pipermail/community/ |
17:58.07 | dcordes | Alex[sp3dev]: ;) |
17:58.39 | Alex[sp3dev] | $299? hum. no way.. you can buy any chinese mid for $150 and have the same hw.. but not open hardware, of course |
17:58.44 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
17:59.37 | Alex[sp3dev] | dcordes: i'm not speaking of OM, but about the finished gta04.. |
17:59.38 | hyc | jonpry: silly question, but isn't there a set of rpc's for getting battery state etc? |
17:59.43 | jonpry | i don't know about $150. it won't have cortex a8, or usable ram |
18:00.12 | jonpry | hyc, depends on the phone, on rhodium we use dex, but it only gives you current and voltage, not state of charge |
18:00.31 | dcordes | Alex[sp3dev]: yeah I guessed |
18:00.31 | Alex[sp3dev] | jonpry: anyway.. a8 doesn't sound tasty now that a lot of a9 dual-core devices are going to be released in a month or two |
18:00.47 | dcordes | Alex[sp3dev]: there is no openmoko anyway |
18:00.52 | [acl] | hyc: yup but i think we have never been able to actually use them. Tried a while back.. back in the good ol days |
18:01.00 | jonpry | it depends. have to realize that the second core is just replacing the dsp |
18:01.26 | [acl] | hyc: eventually i gave up after constant torment from alex and lectures as to how rpc is evil and you will go to hell if you use it |
18:01.32 | [acl] | :-p |
18:01.44 | hyc | sheesh :) |
18:03.06 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:03.22 | arrrghhh | lol |
18:03.26 | [acl] | hyc: but we can always try again.. i know we have that info somewhere. We did alot of testing for this damn batt. we even had some someone dismember their batt ..lol |
18:03.28 | jonpry | imho WebM is the reason for going to A9, and google wants WebM so they can stop having there products rely on weirdass unupgradable qc firmware |
18:04.18 | Alex[sp3dev] | jonpry: imho google wants to get rid of all patented encoders/decoders as they don't want to pay money to mpeg |
18:04.44 | arrrghhh | yup |
18:04.50 | jonpry | seems like a lot of work to save $.17 |
18:04.56 | arrrghhh | lol |
18:05.02 | *** join/#htc-linux balans1 (~Gebruiker@82-170-217-205.ip.telfort.nl) |
18:05.25 | arrrghhh | adds up quick when you have 50,000,000 phones |
18:05.43 | Alex[sp3dev] | but anyway. i suppose omap4 still has a dsp in addition to two cores? but what really matters is the GPU and ram |
18:06.09 | jonpry | omap4 doesn't have dsp. except for maybe in the modem |
18:06.15 | *** join/#htc-linux lknd (~kvirc@95-24-230-206.broadband.corbina.ru) |
18:06.46 | jonpry | regardless of googles motivation, its not possible for them to write AMSS updates for devices to allow WebM |
18:06.54 | hyc | acl: i guess if it's not going to save any effort, then no point. it just seemed like since we already have it for trout / g1 it wouldn't be too bad |
18:07.39 | [acl] | hyc: you can test it.. i mean its not hard to implement but i remember the calls didnt work but thats maybe because we werent using them right. |
18:08.43 | hyc | i may give it a shot, but not in the next week at least. |
18:09.20 | hyc | was going to try to cleanup the rhodium board file, see if the generic msm_add_usb works, etc. |
18:11.10 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:17.23 | *** join/#htc-linux GlemSom (~glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
18:19.16 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:19.48 | *** join/#htc-linux joshkoss (~android@192.234.2.49) |
18:25.00 | *** join/#htc-linux Jorg (541fd455@gateway/web/freenode/ip.84.31.212.85) |
18:26.14 | Jorg | hello i got a problem with android on my htc tp2 (rhodium), it's about the connection with my provider (there isn't a connection) can someone help me with that? |
18:26.57 | joshkoss | yea search apn |
18:27.07 | joshkoss | and add your own apn for your provider |
18:27.10 | arrrghhh | Jorg, also this room isn't for support |
18:27.26 | Jorg | ohh sorry arrrghh thought that i could ask it here |
18:27.29 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:27.37 | arrrghhh | Jorg, topic is kernel development. |
18:27.48 | Jorg | i am searching for available networks but it can't find any |
18:28.02 | arrrghhh | This channel is for development purposes |
18:28.06 | Jorg | oh sorry oke, i will be gone quick than:P thought maybe you could answer it easy(A) |
18:30.51 | arrrghhh | doesn't really matter if it's easy or hard, it's not development related. |
18:31.37 | Alex[sp3dev] | arrrghhh fighting for 1337n3355 |
18:31.49 | arrrghhh | lol |
18:31.59 | arrrghhh | i just don't want this channel clogged with support requests |
18:32.03 | arrrghhh | that's what #xdandroid is for |
18:32.09 | stinebd | what |
18:32.10 | stinebd | no |
18:32.17 | stinebd | that's what xda-devs is for |
18:32.40 | arrrghhh | lol |
18:32.41 | stinebd | i rest my case |
18:32.47 | arrrghhh | yea, not really for devs anymore is it. |
18:35.35 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:40.08 | bioterror | hmm |
18:40.13 | bioterror | handhelds.org is down |
18:40.17 | bioterror | cannot get haret |
18:40.20 | Alex[sp3dev] | yep, for like 2 months |
18:40.25 | Alex[sp3dev] | get it off ltg |
18:41.46 | Alex[sp3dev] | damn i want iwconfig on android |
18:42.24 | bioterror | I hate megaupload |
18:42.34 | bioterror | I have to wait for ages after first download |
18:42.40 | bioterror | mediafire ftw |
18:42.47 | Alex[sp3dev] | http://www.mediafire.com/?a1rzi5embishqd7 |
18:42.57 | Alex[sp3dev] | bioterror: contains haret and 2.6.35.7 kernel zimage |
18:43.06 | bioterror | thanks |
18:43.28 | Alex[sp3dev] | bioterror: use 27 kernel, though. 35 is a wip |
18:43.33 | jonpry | rpierce99, i have an idea :p |
18:43.35 | MassStash | <arrrghhh> i know, but he's having seizures. |
18:43.45 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:43.45 | arrrghhh | lol |
18:43.47 | rpierce99 | jonpry: lets have it |
18:43.57 | jonpry | you have an ac charger? |
18:44.12 | rpierce99 | yep |
18:44.19 | jonpry | what about a low power hub? |
18:44.39 | MassStash | lmfao |
18:44.58 | rpierce99 | hmmmm, don't think I have a hub at all, i have a usb port on the front of my printer though |
18:45.20 | arrrghhh | jonpry, i do |
18:45.24 | jonpry | hmm. well never mind that just plug it into ac for a bit |
18:45.25 | MassStash | L_miller, it AUTOBOOTS when has enough charge, then no charging drivers are around to continue powering phone |
18:45.26 | arrrghhh | AFAIK i do |
18:45.50 | arrrghhh | MassStash, yes, we were trying to get you into a state when the phone is OFF and CHARGING |
18:46.00 | MassStash | get to either replimenu, or A N D R O I D text during boot,then dead battery |
18:46.25 | MassStash | right, just reminding him that it AUTOBOOTS for some god awful reason |
18:46.26 | arrrghhh | damnit jim |
18:46.30 | [Rapunzel] | ftw just enter SPL and charge it there :P |
18:46.30 | arrrghhh | listen to what we're saying |
18:46.31 | jonpry | rpierce99, i think it is just a scale factor. so we know that 3.5 amps == 500ma. and some ac power should be 900ma * 7 as well |
18:46.49 | MassStash | cannot enter bootloader aka spl |
18:47.00 | MassStash | when holding button combo, does not boot to spl |
18:47.06 | jonpry | MassStash, just plug it in with battery out. then insert. it won't autoboot. at least not eveytime |
18:47.10 | MassStash | just chareing light off and nothing else |
18:47.10 | rpierce99 | i'll check the output of the charger i plug it into, but the log i posted earlier, 90% of it (the middle section) was on that charger |
18:47.18 | [Rapunzel] | it must enter |
18:47.18 | MassStash | let go of buttons, light back on begging the look again |
18:47.28 | [Rapunzel] | otherwise something broken in ur device |
18:47.29 | MassStash | insert battery your saying? |
18:48.23 | MassStash | strange, I'm out for now tho. thanks guys |
18:48.53 | arrrghhh | MassStash, jonpry gave you the answer - iirc plug in with battery out. then insert it, and it won't turn on |
18:50.16 | rpierce99 | jonpry: in the log the 5th number is the amps? |
18:50.33 | jonpry | rpierce99, your log has same 3.5 amps for both ac and usb. yes 5th number |
18:51.33 | *** join/#htc-linux MN-- (5689d26a@gateway/web/freenode/ip.86.137.210.106) |
18:51.33 | rpierce99 | jonpry: yeah it starts at 3.5 while it's charging and gets lower and lower as it charges until it sits around at .4-.5 |
18:51.38 | L_miller | MassStash it should be able to charge that way |
18:52.07 | L_miller | Unless you also toasted the kernal |
18:52.19 | jonpry | rpierce99, is it possible your ac charger is only 500ma? |
18:52.20 | arrrghhh | lol |
18:52.23 | *** join/#htc-linux greg- (greg-@port-8276.pppoe.wtnet.de) |
18:52.35 | rpierce99 | i just checked it, the label says 5v 1A |
18:53.20 | rpierce99 | but it's plugged into a 2->6 power strip that's pretty old, I could plug it directly into the wall if that could cause weirdness |
18:53.30 | jonpry | no i don't think so |
18:53.58 | jonpry | but there are weird pins used to tell the device it is 900ma capable. not always the same |
18:54.26 | rpierce99 | yeah there's non guarantee this is the proper charger, it's labeled UT Starcom |
18:54.36 | rpierce99 | i have so many USB chargers in this house I just randomly pick one |
18:54.47 | arrrghhh | lol |
18:55.19 | jonpry | i wonder how we can get 100ma service from a computer |
18:55.44 | Alex[sp3dev] | aite, looks like wl12xx driver has finally loaded. but damn, i cannot test it. android has no iwlist and iwconfig. and moreover, for some reason it enters a bootloop when i enable wifi ;) |
18:56.04 | Alex[sp3dev] | but ifconfig wlan0 some_shitty_ip up works |
18:56.42 | Alex[sp3dev] | ah, of course it crashes. it's low on memory |
18:57.46 | hyc | setup your own wpa supplicant config |
18:58.01 | jonpry | i still don't understand why my phone is always at 2.5, and yours at 3.5 |
18:58.45 | hyc | have identical batteries? |
18:58.56 | Alex[sp3dev] | i'll better untar some rootfs and chroot there |
18:58.57 | rpierce99 | well it gets lower (and goes through the 2.5 range) as it gets closer to charged, maybe a difference in battery age or capacity |
19:00.14 | jonpry | mine acts similar, starts at high current and tapers down, and always starts at 2.5 |
19:00.30 | jonpry | what model do you have. i have 210 |
19:00.34 | rpierce99 | 400 |
19:01.04 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
19:01.19 | jonpry | and the wizard gets correct numbers on 300 |
19:02.35 | *** join/#htc-linux Jorg (541fd455@gateway/web/freenode/ip.84.31.212.85) |
19:03.02 | jonpry | fortunately i think it is not real hard to calculate. just wait for a plugin on a fairly discharged battery, and instant scale factor |
19:04.23 | rpierce99 | would make the levels pretty interesting at first, seeing as how it would be 7 for me and 1 for WisTilt2 |
19:05.04 | jonpry | the plan is to use the existing code until the daemon gathers enough data to compute your battery parameters |
19:05.18 | WisTilt2 | stinebd: getting this error when building xdandroid: hardware/msm7k/libaudio/AudioHardware.cpp:496: error: 'pr_info' was not declared in this scope. sync with repo so any ideas? |
19:05.26 | jonpry | right now it is pulling the switch early |
19:06.05 | jonpry | WisTilt2, if you have time would you run my kernel and daemon and report your charging current? or anyone else with a 300 |
19:06.21 | WisTilt2 | jonpry: i changed to the 500ma charger and seeing around 400 in smem, fluke shows 375 or so |
19:07.04 | WisTilt2 | link and setup info? ill try your setup on one of our other 300's |
19:07.13 | jonpry | i am still not convinced my code is broke :p |
19:08.56 | dcordes | [Rapunzel]: does rmnet work when compiled as built in (=y instead of =m) in your and other evo based kernels ? |
19:09.00 | jonpry | WisTilt2, directions http://pastebin.com/Ju4vJvDt |
19:09.12 | dcordes | [Rapunzel]: or must it be the module ? |
19:09.53 | WisTilt2 | jonpry: give me a few mins and ill set it up. ill try both the 1amp and 500ma chargers |
19:09.55 | rpierce99 | jonpry: you can run scbs -d from adb now since it doesn't break sleep |
19:10.08 | jonpry | ic |
19:10.29 | jonpry | also if i shift it to the right 3 bits. get 438ma |
19:10.37 | jonpry | urg |
19:12.25 | WisTilt2 | isnt the adc 12bits? shift right 3bits would be right then |
19:14.01 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
19:14.05 | *** join/#htc-linux Berger (~noreply@c65wn1.wifi.halden.net) |
19:16.50 | *** join/#htc-linux Jhinta (~Jhinta@s529c116e.adsl.wanadoo.nl) |
19:17.15 | arrrghhh | jonpry, want me to try this fun too? |
19:17.37 | jonpry | feel free, what model do you have? |
19:17.49 | arrrghhh | same as rpierce99. 400 |
19:18.18 | jonpry | the more the merrier |
19:18.26 | arrrghhh | that's what i say ;) |
19:18.42 | arrrghhh | how long do you want it to charge before sending you logs? |
19:19.12 | jonpry | it take measurement every 5 seconds, but its fairly noisy, so maybe a minute? |
19:19.19 | arrrghhh | oh awesome. |
19:19.26 | arrrghhh | let me reboot and i'll have some info for you quickly :D |
19:20.29 | jonpry | i think we are going to need to log discharge and charge current separately. i thought it was in normal units, but looking at the changelog on htc_battery_smem, this has been an ongoing problem |
19:21.08 | jonpry | old code said to use .33 factor for rhod. but that still leaves rpierce99's values way out of line |
19:25.03 | Alex[sp3dev] | hum strange. the ifconfig works, but iwlist won't find a thing and iwconfig won't associate with the AP. i guess i need to enable mac80211 debugging to see |
19:27.10 | *** join/#htc-linux joshkoss (~android@c-76-127-147-21.hsd1.ct.comcast.net) |
19:31.35 | jonpry | i put up a new scbs that will log charge and discharge separately |
19:32.27 | *** join/#htc-linux Erikson (~Erik@i5E86D9E6.versanet.de) |
19:32.47 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
19:33.07 | arrrghhh | jonpry, this is wacky. fun tho :P |
19:33.08 | stinebd | WisTilt2: which branch? |
19:33.17 | arrrghhh | just spitting stuffs out in the terminal hehe |
19:33.52 | jonpry | yeah was for debugging, i will remove that |
19:34.31 | arrrghhh | so you want a paste of this? |
19:34.33 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
19:34.34 | arrrghhh | i have 56 points so far |
19:34.48 | WisTilt2 | stinebd: froyo |
19:35.05 | rpierce99 | arrrghhh: it's logging to your sd card, you can just kill the terminal |
19:35.08 | stinebd | WisTilt2: alright i'll check it out when i get a chance |
19:35.28 | *** join/#htc-linux joshkoss (~android@c-76-127-147-21.hsd1.ct.comcast.net) |
19:35.35 | bioterror | damn this booting takes a while :) |
19:36.47 | WisTilt2 | stinebd: i just commented them out, they're just for logging obviously. |
19:36.49 | jonpry | arrrghhh, sure, paste the sdcard dump though. the stuff in terminal is incomplete |
19:36.49 | arrrghhh | jonpry, might not be such a good test case, as it was already near full, but here it be. |
19:36.56 | arrrghhh | oh ok 1 sec. |
19:37.12 | arrrghhh | this'll probably kick me off |
19:37.28 | jonpry | you can adb pull it |
19:37.44 | arrrghhh | http://pastebin.com/VGjUN4R8 |
19:38.00 | arrrghhh | hey it didn't. yea, that's what i'm doing. but i'm also using adb to tether so i can get on IRC @ work :D |
19:38.02 | WisTilt2 | i have 4 rhod 300's on my desk testing lol. jonpry, you want this log? i ran 15 intervals with 1amp charger and 15 with the 500ma. |
19:38.21 | jonpry | please |
19:38.47 | jonpry | arrrghhh, 2 amps :p |
19:38.59 | WisTilt2 | jonpry: http://pastebin.com/0trH6nnM |
19:39.10 | rpierce99 | 3.4 |
19:39.23 | WisTilt2 | i umplugged the 1amp at 15 then went to 500ma |
19:39.29 | WisTilt2 | unplugged jeeze |
19:39.31 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
19:39.45 | arrrghhh | ah, it's when i close droid explorer that it boots me offline. that's right. |
19:39.59 | arrrghhh | jonpry, 2amps? that's plugged into my lappy via usb lol. |
19:40.11 | jonpry | WisTilt2, 3.4 |
19:40.51 | Alex[sp3dev] | ok, it's official - the wifi is deliberately pissing me off |
19:40.52 | rpierce99 | so there has to be something wrong with the number, needs shifted or divided or something |
19:40.53 | WisTilt2 | maybe you discovered a way to make more power. need to patent that! |
19:41.24 | arrrghhh | patent my dell laptop |
19:41.30 | arrrghhh | don't think dell would appreciate that. |
19:41.32 | arrrghhh | :P |
19:41.37 | jonpry | WisTilt2, i have it logging raw smem values to dmesg, i don't understand how your code is getting different numbers |
19:41.58 | WisTilt2 | you reading the same smem i am? |
19:42.30 | WisTilt2 | base + 0xfc144 16bits |
19:42.44 | Alex[sp3dev] | ok. well, if the driver has loaded, the firmware has loaded and no mmc errors are popping, then i'm probably missing some vreg or gpio for the transceiver |
19:44.48 | jonpry | WisTilt2, i am pretty sure, and the numbers make sense in an unscaled kind of way, but i will produce something new |
19:45.18 | bioterror | I took rhobuntu 19_09_2010 build, does it have X? :D |
19:45.31 | WisTilt2 | you're using batt32 so maybe its pulling off 4bytes instead of 2 into batt info |
19:45.33 | Alex[sp3dev] | of course it does |
19:45.34 | *** join/#htc-linux AndIrc_ (~android@c-76-127-147-21.hsd1.ct.comcast.net) |
19:45.47 | arrrghhh | bioterror, uhhh yes. but you should probably post in that thread. |
19:48.42 | jonpry | ok, new zImage with guaranteed smem address posted |
19:48.58 | jonpry | WisTilt2, this look good to you: batt_info.batt_current = *(u16*)(MSM_SHARED_RAM_BASE + 0xfc144); |
19:49.42 | WisTilt2 | yep |
19:50.29 | WisTilt2 | so are we seeing values way off between devices? |
19:50.57 | jonpry | we seem to see either 2.5 amps or 3.5 amps |
19:51.15 | jonpry | but it could be battery, or an actual reduction is charging current between gsm/cdma |
19:51.42 | WisTilt2 | what are your raw values without any shifting? |
19:51.49 | WisTilt2 | or correction |
19:51.52 | jonpry | i dunno just run a dmesg |
19:52.26 | jonpry | scbs_take_measure: v, c, d, time |
19:52.40 | jonpry | i checked them and it is being converted to userland float correctly |
19:54.13 | WisTilt2 | yeah but those are after shifts and /1000 |
19:54.38 | WisTilt2 | what is batt_current/discharge native value |
19:55.27 | jonpry | i don't know, but one would expect multiplication and division to be working |
19:55.30 | *** join/#htc-linux bzo (~chatzilla@netblock-68-183-234-14.dslextreme.com) |
19:56.08 | *** join/#htc-linux rob_w (~bob@ppp-188-174-65-152.dynamic.mnet-online.de) |
19:56.14 | WisTilt2 | what im saying is my values being so far off yours are because im not doing any conversion at all to what im reading so we cant compare |
19:56.50 | WisTilt2 | and your variables are defined 32bit not 16 |
19:57.07 | jonpry | yeah but they are extracted from smem as 16 |
19:57.16 | jonpry | and converted to 16.16 |
19:57.38 | jonpry | so it is correct. but who am i to stand in the way of progress. i uploaded new kernel, with raw value dmesg print |
19:57.51 | WisTilt2 | yeah true. when you shifted basically 12bits you saw a number that looked more like what it should be no? |
19:57.54 | bzo | jonpry, you sure that code to get current works correctly? Seems like you're casting to a 16bit address, then getting value from it |
19:58.17 | Alex[sp3dev] | bzo: it's a pointer to a u16 |
19:58.23 | Alex[sp3dev] | pointers are always 32 bit |
19:58.24 | jonpry | thats new code, but afaik that is how you get a u16 out of memory |
19:58.34 | bzo | hm, ok |
19:59.02 | *** join/#htc-linux ftoz (~root@cst-prg-249-3.vodafone.cz) |
19:59.09 | *** join/#htc-linux swc|666 (~x00@unaffiliated/swc666/x-4934821) |
19:59.43 | jonpry | i dunno, there are scale factors all over the existing code for charge current, and the values i'm getting appear to be consistent with pluggin in a charger and charging the battery |
20:00.22 | WisTilt2 | where are you firing the dex call? |
20:00.41 | jonpry | htc_get_batt_smem_info() does it |
20:00.52 | WisTilt2 | so you call that every 5secs? |
20:01.10 | jonpry | yeah |
20:01.40 | jonpry | i fixed some craziness with mutexes in that file |
20:01.50 | jonpry | it is still fubar |
20:02.12 | jonpry | how that got past the phh test i'll never know |
20:02.54 | bzo | I think that stuff predated phh's repo |
20:02.56 | rpierce99 | jonpry: http://pastebin.com/jAE5Bihw |
20:03.02 | jonpry | no its camro patch |
20:03.17 | camro | ? |
20:03.18 | camro | hi |
20:03.32 | camro | hehe, heard my name :) |
20:03.41 | jonpry | rpierce99, were you plugged in? |
20:03.42 | rpierce99 | i'm guessing the value we're looking at was moved to the end of the output? |
20:03.49 | rpierce99 | plugged, then unplugged, then plugged |
20:03.56 | *** join/#htc-linux Christie (Christine@adsl-75-1-6-172.dsl.irvnca.sbcglobal.net) |
20:03.59 | jonpry | its number 6 |
20:04.15 | jonpry | can you get a dmesg? |
20:04.22 | rpierce99 | yeah |
20:05.21 | rpierce99 | http://pastebin.com/gcspSeGb |
20:07.17 | jonpry | it appears that there is nothing in (MSM_SHARED_RAM_BASE + 0xfc144) |
20:07.48 | Jhinta | is there any info how to port android kernel to gnu comfort? |
20:10.14 | jonpry | WisTilt2, it looks like existing code is using 0xfc146 |
20:11.36 | WisTilt2 | that should be the battery id field or temp |
20:13.02 | jonpry | 140 = id, 142 = temp, 144 = voltage, 146 = charge 148 = discharge |
20:13.25 | jonpry | do you think the compiler would shaft my code because its not volatile? |
20:13.57 | Alex[sp3dev] | it can.. but well, you can read it from userspace as well |
20:14.45 | bzo | jonpry: isn't the rhod battery field size 4 bytes? |
20:15.55 | jonpry | i'm just using the htc_battery_smem code. which seems to work fine. but wistilt2 says he gets correct numbers from some u16 address, which i cannot reproduce |
20:16.09 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
20:17.01 | bzo | if you're using that code it should be using 4 byte fields because the pdata batt field size is set to 4 |
20:18.34 | bzo | whether only 2 bytes of data are written to those fields is another matter |
20:18.56 | jonpry | ok, so then charge is 0xfc14c |
20:20.03 | jonpry | WisTilt2, are you sure your reading 0xfc144? that is marked as temperature |
20:20.03 | bzo | I would think so |
20:20.53 | jonpry | i still don't understand why we got zero's |
20:21.15 | WisTilt2 | lunch just got delivered but basically what i did was output 0xfc140 and up, then plugged in charger to see which addy changed. 0xfc144 is what i am getting that reading from. ill bb in about 30 |
20:21.24 | [Rapunzel] | because WM AMSS only supports battery data via DEX? :P |
20:21.45 | *** join/#htc-linux Christie (Christine@adsl-75-1-6-172.dsl.irvnca.sbcglobal.net) |
20:23.30 | [acl] | WisTilt2: when is ur boy fixing the ril ? :-p |
20:23.49 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
20:24.50 | arrrghhh | jonpry, lol my battery % was 249298 |
20:25.04 | jonpry | yeah, that is a feature |
20:25.05 | arrrghhh | that's pretty impressive. battery should last about a year assuming it doesn't drain too quickly :P |
20:25.10 | arrrghhh | lmao awesome feature. |
20:25.21 | jonpry | you have to turn it off at 228,000% |
20:25.24 | arrrghhh | getting more logs for you on the newest kernel. |
20:25.29 | arrrghhh | lol |
20:25.44 | jonpry | i got a new one, that dumps the whole battery region in different alignmentds |
20:26.10 | arrrghhh | another new one? i grabbed this one like 20 mins ago or so... |
20:26.16 | jonpry | if its good enough for the wizard... |
20:26.20 | jonpry | yeah i just put it up |
20:26.24 | arrrghhh | crap :P |
20:26.33 | arrrghhh | so these values are probably useless, oh well. |
20:26.41 | rpierce99 | no new scbs though right? |
20:26.44 | jonpry | no |
20:26.52 | arrrghhh | reboot time, brb. |
20:27.04 | jonpry | it rotates the logs. so sometime later you can just pack up scbs.log* |
20:29.49 | *** join/#htc-linux mastermerlin (~Adium@p4FEE4906.dip.t-dialin.net) |
20:30.10 | jonpry | bzo, what do you think? http://pastebin.com/qTv68TmP |
20:32.06 | bzo | seems fine, maybe you should print hex? |
20:34.06 | jonpry | thats true |
20:35.26 | rpierce99 | jonpry: dmesg or log file? |
20:35.30 | jonpry | dmesg |
20:36.16 | rpierce99 | http://pastebin.com/5JbEW94r |
20:36.21 | jonpry | i put up a new scbs that will report percentages. its based on model derived from WisTilt2 battery so it won't quite as accurate as it should be, and its not linear, but much better than 228,000 % |
20:38.13 | jonpry | wtf, how is everything zero? |
20:41.05 | emwe | bzo: the battery smem pdata is adjusted in the device fixup to 0xfc110 field size=2 |
20:42.21 | jonpry | that is how everything is zero :p |
20:42.22 | bzo | emwe: you're right, that seems stupid |
20:42.38 | emwe | bzo: cleaned that up on .35 for topa and rhod. and yes, totally sucky. |
20:42.43 | *** join/#htc-linux Christie (Christine@adsl-75-1-6-172.dsl.irvnca.sbcglobal.net) |
20:43.37 | jonpry | so what is wistilt2 smoking? |
20:44.59 | [Rapunzel] | smoke from ur boat maybe :D |
20:45.21 | jonpry | whatever it is, we need to get it to all rhodium users |
20:45.26 | [Rapunzel] | is it benzine? |
20:47.00 | emwe | is there any kconfig which allows for setting the printk/dmesg buffer higher so some messages aren't skipped? |
20:47.01 | *** join/#htc-linux dekar (~dekar@drms-590c4642.pool.mediaWays.net) |
20:47.48 | dcordes | [Rapunzel]: answered the question by testing. rmnet needs to be compiled as module in evo kern |
20:49.49 | emwe | holy collapse? <6>[ 522.177978] msm_pm_collapse(): returned 1 |
20:50.13 | jonpry | is it sleeping now? |
20:50.45 | [Rapunzel] | dcordes? |
20:50.51 | [Rapunzel] | it worked builtin also |
20:51.04 | dcordes | [Rapunzel]: :( I did not get rmnet0 |
20:51.13 | dcordes | [Rapunzel]: ifconfig rmnet0 up : no such iface |
20:51.17 | [Rapunzel] | strange |
20:51.28 | emwe | jonpry: don't dare to pull the usb plug. have suspicion something is runny on very low speed currently. is there any place to lookup cpu speed/clocks in sysfs procfs, wherever? |
20:51.59 | [Rapunzel] | dcordes, which kernel are u using? |
20:52.11 | dcordes | linux_leo_cotulla of course |
20:52.23 | [Rapunzel] | strange |
20:52.28 | [Rapunzel] | maybe u added PPP |
20:52.32 | [Rapunzel] | or messed config? |
20:52.36 | dcordes | ppp = y |
20:52.42 | dcordes | problem ? |
20:53.10 | [Rapunzel] | hm |
20:53.10 | emwe | jonpry: adb died out of a sudden again and then freeze... |
20:53.28 | [Rapunzel] | but it have as =m also in my current config |
20:53.34 | dcordes | [Rapunzel]: your arch/arm/configs/htceo_defconfiig has ppp=y rmnet=m |
20:53.34 | *** join/#htc-linux Pr0z (Pr0z@bzq-84-109-110-248.red.bezeqint.net) |
20:53.38 | fakker | privet |
20:53.42 | [Rapunzel] | yes... but it was not there |
20:53.44 | [Rapunzel] | privet fakker |
20:53.53 | [Rapunzel] | anyway u got rmnet0 now? |
20:54.03 | dcordes | with =m yes |
20:54.47 | [Rapunzel] | so u got internet inside SHR? |
20:55.10 | dcordes | nope it is not giving me any RX |
20:55.21 | dcordes | I need to try set the apn manually |
20:55.43 | [Rapunzel] | yes |
20:55.43 | dcordes | it doesn't seem to work with the shipped program in settings OR my kernel is broken |
20:55.55 | [Rapunzel] | u may looks at meego page |
20:55.59 | [Rapunzel] | there was some script for data |
20:56.00 | [Rapunzel] | on desire |
20:56.03 | dcordes | cool |
20:56.11 | dcordes | I never connected rmnet manually so it will be worht a read |
20:56.20 | dcordes | used to ppp |
20:56.30 | [Rapunzel] | maybe PPP better for SHR |
20:56.33 | [Rapunzel] | because QMI is closed |
20:56.47 | [Rapunzel] | http://wiki.meego.com/ARM/MSMQSD |
20:56.54 | [Rapunzel] | GPRS |
20:58.38 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
20:59.26 | rpierce99 | arrrghhh: that kernel won't work, just 0s |
21:00.13 | arrrghhh | i grabbed yet another kernel |
21:00.15 | arrrghhh | that one won't either? |
21:00.20 | arrrghhh | i also grabbed a new scbs |
21:01.04 | rpierce99 | unless jonpry posted one without announcing it, he had the wrong memory offset |
21:01.24 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
21:01.30 | arrrghhh | he did post another one without announcing |
21:01.44 | jonpry | well its now dumping raw values, but all it shows is that wistilt2 is confused :p |
21:02.04 | arrrghhh | lol |
21:02.16 | arrrghhh | battery level is still 251658 |
21:02.23 | arrrghhh | with new scbs and your "newest" kernel. |
21:02.28 | arrrghhh | i was doing hashchecks to be sure :P |
21:02.50 | jonpry | yeah my phone is not even showing the percentage |
21:02.53 | arrrghhh | jonpry, do you want any logs of this? |
21:02.55 | jonpry | can't find the battery meter |
21:03.11 | jonpry | long terms logs are good, that way i can model your battery |
21:03.12 | arrrghhh | seems like they'll be relatively useless. |
21:03.16 | arrrghhh | ok |
21:05.45 | *** join/#htc-linux LordDeath (~Lord|Lapt@cable-81-173-166-52.netcologne.de) |
21:07.49 | WisTilt2 | jonpry: ok back but looks like im confused?? |
21:08.04 | jonpry | there is nothing at 0xfc14* |
21:08.14 | *** join/#htc-linux Alex[sp3dev] (~alexander@ip-95-220-12-212.bb.netbynet.ru) |
21:08.30 | Alex[sp3dev] | who can rebuild the gps library for me right now? |
21:08.51 | jonpry | WisTilt2, it is located at 0xfc116 |
21:09.39 | WisTilt2 | i have data at 142-146. here's the loop of code i did to do those 1 second reads i sent you... |
21:09.42 | WisTilt2 | unsigned v; |
21:09.42 | WisTilt2 | unsigned c; |
21:09.42 | WisTilt2 | unsigned t; |
21:09.42 | WisTilt2 | for (i=1;i<=14400;i++){ |
21:09.42 | WisTilt2 | dex.cmd = PCOM_GET_BATTERY_DATA; |
21:09.42 | WisTilt2 | msm_proc_comm_wince(&dex, 0); |
21:09.44 | WisTilt2 | v = (MSM_SHARED_RAM_BASE + 0xfc142); |
21:09.46 | WisTilt2 | c = (MSM_SHARED_RAM_BASE + 0xfc144); |
21:09.48 | WisTilt2 | t = (MSM_SHARED_RAM_BASE + 0xfc146); |
21:09.50 | WisTilt2 | sleep(1); |
21:09.52 | WisTilt2 | } |
21:10.17 | Alex[sp3dev] | ok, noone. back to binary patching then |
21:10.36 | jonpry | well i tried that. and got nothing, and arggh got nothing |
21:10.37 | [Rapunzel] | lovi kaif |
21:11.02 | emwe | Alex[sp3dev]: the gingerbread one? |
21:11.20 | Alex[sp3dev] | emwe: froyo |
21:11.22 | jonpry | WisTilt2, and that code doesn't dereference the addresses |
21:11.27 | emwe | Alex[sp3dev]: then no. |
21:12.03 | jonpry | WisTilt2, i dumped everything of 0xfc140 to 0xfc160. all zeros |
21:12.12 | *** join/#htc-linux Markinus (~Miranda@212.255.18.217) |
21:12.29 | WisTilt2 | you're seeing data at 0xfc116? |
21:12.35 | jonpry | yeah |
21:13.05 | [Rapunzel] | but they located at 0xFC110 - 5 hwords, not at fc160 |
21:13.33 | [Rapunzel] | or what are u doing, jonpry? |
21:13.37 | *** join/#htc-linux sykosoft (455cd27d@gateway/web/freenode/ip.69.92.210.125) |
21:13.43 | sykosoft | jonpry: I haven't finished reading the logs yet, but about your charge current |
21:13.48 | sykosoft | you wouldn't be using a macbook pro? |
21:13.58 | sykosoft | or a relatively recent laptop? |
21:14.07 | jonpry | its new, sandybridge |
21:14.15 | rpierce99 | and i'm using a mbp |
21:14.20 | jonpry | but other people got higher readings than me |
21:14.31 | sykosoft | a lot of manufacturers increased the power available via usb in response to several factors |
21:14.40 | sykosoft | as a for instance, older mbp cannot charge an ipad via usb |
21:14.45 | sykosoft | because of only 500ma output |
21:14.47 | sykosoft | newer ones can |
21:14.54 | sykosoft | with a much higher output that doesn't comply to the spec |
21:15.02 | jonpry | i'm pretty sure it has 900ma usb support |
21:15.09 | [Rapunzel] | I think it just lie, I got also about 800 ma charge current from my PC |
21:15.11 | [Rapunzel] | via USB |
21:15.13 | jonpry | but not 3.5 amps. and wistilt2 has got a fluke on his charger |
21:15.18 | [Rapunzel] | but LEO never got such current |
21:15.23 | [Rapunzel] | :P |
21:15.25 | sykosoft | ha! 3.5 amps, the cable should be on fire |
21:15.33 | [Rapunzel] | it must be warm :P |
21:15.43 | jonpry | its not happening though, so its not a big deal |
21:15.58 | [Rapunzel] | freaked warm |
21:16.11 | sykosoft | all right, thought I'd throw that out there |
21:16.21 | sykosoft | I've seen as high as 1100ma on my systems |
21:16.32 | sykosoft | not even sure what it's technically capable of |
21:16.52 | sykosoft | guess it would have served me to finish reading logs |
21:19.00 | bioterror | what's rhobuntus login credentials?-) |
21:19.12 | sykosoft | hmmm. I've had that battery issue. Had to use a lab power supply to get it to have voltage to allow the charging circuit to operate properly |
21:20.17 | *** join/#htc-linux friehmaen (freeman@xers.de) |
21:21.09 | jonpry | new scbs that charges in correct direction now |
21:23.49 | rpierce99 | jonpry: is the memory address situation sorted out? |
21:24.00 | WisTilt2 | jonpry: i just ran my code again and getting same data i was before. only thing i can think is some of the many changes ive made to the board file, pm, and everything else, changed that offset. im going to try it on the current git source without any of my changes. |
21:24.07 | *** join/#htc-linux Rajko (~Rajko@2001:470:1f0b:728:e144:756a:4526:e23b) |
21:24.50 | [acl] | im here to defend wistilt.. i dont like these rumors about him "smoking" or him being crazy. :-p |
21:25.28 | Alex[sp3dev] | [acl]: it's not like you're the only crazy smoking guy in here |
21:25.28 | WisTilt2 | lol. not crazy yet i hope |
21:25.50 | [acl] | Alex[sp3dev]: :-D |
21:25.51 | WisTilt2 | [acl] ril is coming along, pretty much being re-written |
21:26.12 | [acl] | WisTilt2: you know we had this dicussion about lag and sods .. and how i could never get it to happen. |
21:26.24 | [acl] | WisTilt2: well i never had service so ril was always chill |
21:26.38 | [acl] | WisTilt2: onec i got service on my phone.. bam .. lagville |
21:26.38 | WisTilt2 | now you get it dont you |
21:27.03 | jonpry | rpierce99, not yet, think one more change |
21:27.12 | WisTilt2 | yep. problem is with the way the data streams are handled. |
21:27.38 | jonpry | WisTilt2, maybe try dumping 0xfc11*, its possible the 300 has two different locations. i think they used to use 0xfc140 on rhod |
21:27.42 | [acl] | WisTilt2: well if you got it covered, then i wont spend time on it. :-) i saw the lexicon ril but it doesnt disasemble well :-( |
21:28.34 | WisTilt2 | we'll take care of it. he's putting all the missing cdma stuff in there also. looks like this ril was written for gsm mainly |
21:29.04 | [acl] | WisTilt2: ohh yeah .. cdma was a recent thing.. pippy did most of it i think |
21:29.56 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:30.53 | Alex[sp3dev] | WisTilt2: could i ask you to implement a fix for ppp - to first look for /dev/smd7 and use it for ppp, and if it is not found - fallback to 1. this way, we will not need an ugly hack to redirect smd1 to smd7 in kernel on gsm phones |
21:31.11 | WisTilt2 | jonpry: well, just ran it with unmodified git source and no data. i made a lot of changes in the rhod board file and probably took out some remapping. |
21:31.33 | jonpry | how can you remap where dex puts things? |
21:31.58 | [acl] | Alex[sp3dev]: that whole ppp thing is hideous.. |
21:32.12 | Alex[sp3dev] | [acl]: that is not hideous, that is broken |
21:33.05 | WisTilt2 | jonpry:i dont know im just speculating. ive changed so many things messing around. |
21:33.18 | [acl] | Alex[sp3dev]: same shit yo.. |
21:33.20 | *** join/#htc-linux MN-- (5689d26a@gateway/web/freenode/ip.86.137.210.106) |
21:36.09 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:37.04 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:37.15 | jonpry | ok. so new scbs actually seems to work. very nice battery readings with no craziness at plug/unplug |
21:39.10 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:40.00 | [acl] | we should make a ril request list :-p |
21:40.10 | arrrghhh | jonpry, should i grab it again? :P |
21:40.14 | [acl] | like dont system out the call to pppd |
21:41.01 | rpierce99 | tells me I'm at 96 |
21:41.07 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:43.12 | rpierce99 | it's a little bouncy, went up to 97 and then down down to 94 while downloading |
21:43.18 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:43.22 | rpierce99 | now back to 95 when done downloading |
21:43.52 | jonpry | you have the latest? |
21:44.15 | arrrghhh | i'm guessing i don't. i'm still in the 6-figure battery range. |
21:44.21 | arrrghhh | too bad my salary isn't in that range :( |
21:44.22 | jonpry | lol |
21:44.50 | *** join/#htc-linux Specialist (~tg@andromeda.v6.ginkel.com) |
21:45.57 | jonpry | it's still not done, it needs to generate a model for every battery. there is code to do that, but it is a manual process atm. and it needs a little code to deal with the timestamps |
21:45.58 | arrrghhh | alright. reboot again. jonpry, i can't keep up with you :P |
21:46.40 | jonpry | in theory a model for your particular battery will smooth it right out |
21:46.50 | bioterror | i have to swear a little |
21:47.03 | bioterror | I get into tty1, but ubuntu/temp credentials doesnt work |
21:50.52 | rpierce99 | well now I feel like an idiot, i forgot to restart scbs this last time so i'm guessing it's just using the old method |
21:52.16 | WisTilt2 | jonpry: did you already code a fix for timestamps while in sleep? |
21:53.13 | jonpry | yeah, but last time i looked at it there was a big where it reports every time twice |
21:53.18 | jonpry | *bug |
21:53.49 | rpierce99 | haha old method = 100, new scbs = 45 :) |
21:53.51 | WisTilt2 | you using that register i mentioned or doing it another way |
21:54.14 | jonpry | there is a time you can get from dex |
21:54.26 | jonpry | its a 32khz counter |
21:55.04 | jonpry | rpierce99, you can't trust it for a while. startup is very shaky and it has to train to data stream |
21:55.15 | rpierce99 | ok, it's climbing slowly |
21:55.43 | WisTilt2 | ok. im moving on to ril stuff then since you've got it handled |
21:56.08 | WisTilt2 | Alex[sp3dev] yes adding that looks pretty easy. |
21:56.19 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
21:56.25 | jonpry | rpierce99, that is a bit off though. can you send the log? |
21:56.35 | rpierce99 | absolutely |
21:56.46 | rpierce99 | dmesg or .log |
21:57.02 | arrrghhh | jonpry, mine's really low as well. doesn't even show charging anymore |
21:57.18 | arrrghhh | it says 55% when it's pretty close to 100% |
21:57.36 | jonpry | i have had trouble killing scbs. usually have to kill -9 it. and running 2 is not good |
21:59.06 | rpierce99 | http://pastebin.com/ZuMDYkSy |
21:59.47 | *** join/#htc-linux JustLiving (~Quilck@90.183.82.215) |
21:59.47 | jonpry | rpierce99, your battery just isn't charged :p |
22:00.06 | rpierce99 | according to the old method it is, so maybe this is progress :) |
22:00.55 | jonpry | the voltage to percentage thing is fubar right now. i don't have enough data to make a good one. but your battery is estimated to be at 3.821500 volts, which is just not charged |
22:01.29 | arrrghhh | jonpry, http://pastebin.com/AVLZi9SE |
22:01.39 | arrrghhh | seems mine isn't either, but i was at 100% before... |
22:01.44 | rpierce99 | is scbs.log always the newest? |
22:01.51 | arrrghhh | well 100% in winmo, 97% in android with the old algo |
22:02.04 | jonpry | rpierce99, yes |
22:02.05 | arrrghhh | rpierce99, yes. date/timestamp should confirm. |
22:03.01 | jonpry | there are reports of people having 100% for days on end |
22:03.07 | arrrghhh | lol |
22:03.18 | arrrghhh | i know it's not at 55%. |
22:03.30 | arrrghhh | oO up to 57 now :P |
22:03.46 | arrrghhh | i guess this is a little more accurate than 254693% |
22:05.17 | jonpry | i dunno how long it will work for. the scale factor is just set at 7, which is not right, and it could eventually get out of control |
22:06.19 | arrrghhh | hrm |
22:06.27 | arrrghhh | is it not supposed to show charging as well? |
22:06.37 | arrrghhh | battery status just says "full" |
22:06.37 | rpierce99 | mine shows charging |
22:06.39 | arrrghhh | lol |
22:06.42 | arrrghhh | wtf? |
22:06.44 | arrrghhh | that's odd. |
22:06.47 | arrrghhh | mine... does not. |
22:07.02 | jonpry | oh thats normal |
22:07.04 | *** join/#htc-linux arif_ali (~arif-ali@88-111-128-250.dynamic.dsl.as9105.com) |
22:07.12 | arrrghhh | so what is rpierce99 doing lol |
22:07.13 | jonpry | old code sets the full state |
22:07.17 | rpierce99 | oh wait the icon in the top right doesn't, but the lock screen does |
22:07.26 | arrrghhh | rpierce99, hrm let me check lockscreen |
22:07.37 | arrrghhh | lol lockscreen does. d'oh. |
22:07.38 | jonpry | you must have gone over the threshold. but your log indicates massive charging current |
22:07.38 | arrrghhh | that's odd. |
22:07.59 | arrrghhh | jonpry, this dell is hot enough to cook eggs on |
22:08.03 | arrrghhh | or veal. mmmmm veal |
22:09.30 | *** join/#htc-linux FlawlesStyle (~LOL@unaffiliated/flawlesstyle) |
22:09.31 | jonpry | you can't get charge % anymore? is there an app for that? |
22:09.44 | rpierce99 | i have charge % on a widget and on the lock screen |
22:09.46 | arrrghhh | it's showing charge % |
22:09.51 | arrrghhh | just not showing that it is charging |
22:09.56 | arrrghhh | except for lock screen ^^ |
22:10.11 | arrrghhh | the icon in the notification bar isn't showing charging state... |
22:10.29 | arrrghhh | neither does about phone. it used to show battery status charging/discharging etc. |
22:11.28 | rpierce99 | it's weird that about phone says battery status full but the icon shows like 75% but the text shows 50% |
22:12.23 | arrrghhh | lol |
22:12.23 | arrrghhh | the icon lies |
22:12.29 | arrrghhh | although at this point it seems like everything is lying. |
22:12.41 | arrrghhh | jonpry, so the longer i run it, the more accurate it gets in theory? |
22:12.46 | arrrghhh | then i sent you gigabytes of log data? |
22:12.53 | arrrghhh | exabytes |
22:13.00 | arrrghhh | hope you've got some big hdd's |
22:13.11 | rpierce99 | you have an exabyte microsd card? hook a brother up |
22:13.14 | jonpry | something not right |
22:13.29 | arrrghhh | rpierce99, lol |
22:14.25 | arrrghhh | jonpry, what would you like us to do? |
22:14.39 | arrrghhh | i've got beer at home |
22:15.09 | jonpry | nothing, just send me log data sometime and i will analyze it. just don't pay too much attention to the percentage :p |
22:15.17 | *** join/#htc-linux daevoq (~dae@host141-105-dynamic.56-79-r.retail.telecomitalia.it) |
22:15.41 | rpierce99 | jonpry: it's scaled now so it will start about 50 and go to 0, but 0 is actually 0, right? |
22:15.43 | arrrghhh | lol ok |
22:15.44 | jonpry | i get the feeling that .33 was the correct factir |
22:16.03 | jonpry | rpierce99, its going in the wrong direction |
22:16.12 | jonpry | try unplugging it, and watch it charge 3 times as fast |
22:16.26 | arrrghhh | lol |
22:16.56 | jonpry | question is why is battery fully charged at 3.82 volts |
22:16.58 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
22:17.50 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
22:17.53 | jonpry | i am just jumping ahead, its not ready for use, just logging |
22:18.26 | arrrghhh | ok |
22:18.32 | arrrghhh | i'll run this today and get you some logs tonight. |
22:18.36 | rpierce99 | gotcha, just don't want to get below 222800, so wondered what the new drop dead will be |
22:18.42 | *** join/#htc-linux pw (~pw@coffee-addicts.org) |
22:18.42 | arrrghhh | it's slowly creepying back up |
22:18.48 | arrrghhh | creeping lol |
22:18.51 | arrrghhh | creepying |
22:20.14 | jonpry | rpierce99, it could be at 100%, or 300% |
22:20.29 | jonpry | whenever it feels like it |
22:20.53 | arrrghhh | so i can charge this thing to 300%? |
22:20.57 | arrrghhh | this isn't going to blow up my phone is it |
22:21.04 | rpierce99 | no you can drain it to 300 |
22:21.07 | rpierce99 | haha |
22:23.24 | arrrghhh | up to 65 |
22:23.35 | rpierce99 | charging or draining? |
22:23.43 | arrrghhh | charging |
22:23.49 | arrrghhh | started at 50 i think. maybe 55. |
22:24.13 | arrrghhh | i'm at work, so the only way i'm online is tethered thru my phone via adb. |
22:27.04 | stinebd | WisTilt2: uh oh. my froyo working tree built. |
22:28.33 | WisTilt2 | stinebd: mine did too after i commented out those 2 lines:) pr_info was nowhere to be found though |
22:29.48 | stinebd | WisTilt2: the two lines being if(!acoustic) return 0; in doRouting()? |
22:29.54 | WisTilt2 | yep |
22:30.00 | stinebd | strange |
22:34.04 | *** join/#htc-linux jameschurchman_ (u220@gateway/web/irccloud.com/x-jikliuurqkaazqfr) |
22:34.12 | WisTilt2 | any of you cdma people setup to send AT commands easily? need to get a return value from cdma |
22:34.48 | rpierce99 | i've never had good luck with it, but always willing to try |
22:35.11 | WisTilt2 | didnt we kill your phone last time? |
22:35.23 | rpierce99 | it froze |
22:35.43 | rpierce99 | jonpry: my battery meter is falling now, off the charger |
22:36.18 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
22:36.27 | jonpry | strange :p |
22:36.39 | jonpry | i have plan to figure out ratio now |
22:37.01 | rpierce99 | it is rather warm though :) |
22:37.32 | jonpry | arm9 handles the actual charging |
22:38.07 | rpierce99 | so WisTilt2 do you have steps to follow or just the same ones as before with new commands |
22:38.27 | WisTilt2 | same way as before just diff commands |
22:39.15 | arrrghhh | WisTilt2, i've been able to somewhat. |
22:39.24 | arrrghhh | i'll need all the info up front, as i'm on IRC because of the phone :P |
22:39.32 | WisTilt2 | need 3 of them if you can. hopefully it doesnt lock on you each time. AT+CREG, AT+CSQ, and AT+CBC to start |
22:40.01 | WisTilt2 | i think you had to add the \r iirc |
22:40.11 | rpierce99 | and what smd dev are we echoing to again |
22:40.16 | WisTilt2 | 0 |
22:40.40 | WisTilt2 | you're on sprint correct? |
22:40.45 | rpierce99 | yeah |
22:40.49 | arrrghhh | +1 |
22:41.11 | WisTilt2 | you guys could split up the commands since you're both on sprint |
22:41.23 | arrrghhh | well if i can run them all, i will. |
22:41.31 | arrrghhh | gotta kill the radio, so it'll sign me off. |
22:41.35 | arrrghhh | i'll try them, and see what i get. |
22:41.35 | jonpry | WisTilt2, do you know what your fully charged batteries are reading voltage wise? |
22:41.42 | WisTilt2 | wait, forgot you also have to have ? at the end of each command |
22:41.55 | WisTilt2 | jonpry: on mine its 4200mv |
22:42.20 | jonpry | hrm, from smem and in real life? |
22:42.40 | rpierce99 | haha well it just locked me, wonder if it's the \r or the ? |
22:42.47 | WisTilt2 | real life. only holds there for a few mins after taking charger off though. 4150mv is probably more accurate base |
22:43.33 | arrrghhh | alright. time to blow up my radio, brb. |
22:43.40 | WisTilt2 | rpierce99 you can try without the ? but that should be a query |
22:44.08 | jonpry | In htc_battery there is also a voltage scaling factor |
22:44.11 | rpierce99 | well i did it without either one, so i'm wondering whether it's the lack that freezes |
22:44.37 | WisTilt2 | yeah pretty sure you need ?\r |
22:45.00 | WisTilt2 | did you guys remember to kill rild first? |
22:45.10 | rpierce99 | i used stop ril-daemon |
22:45.17 | rpierce99 | arrrghh is gone |
22:45.19 | WisTilt2 | that should work also |
22:47.28 | *** join/#htc-linux toastcfh (~toastcfh@29-37.200-68.tampabay.res.rr.com) |
22:48.51 | rpierce99 | well it didn't lock up, but I don't see any console output |
22:49.01 | WisTilt2 | on which one? |
22:49.09 | rpierce99 | AT+CREG?\r |
22:49.32 | WisTilt2 | ok send AT+CREG=2 then try it again |
22:49.35 | rpierce99 | all i did was stop ril-daemon and then echo -e 'that' > /dev/smd0 |
22:49.56 | WisTilt2 | and you're reading back in another adb? |
22:50.02 | rpierce99 | no |
22:50.23 | WisTilt2 | you have to cat smd0 in another session to see return values |
22:50.25 | rpierce99 | that was cat /dev/smd0 & |
22:50.36 | WisTilt2 | yep |
22:50.52 | WisTilt2 | do cmd again before you send the other command |
22:51.12 | WisTilt2 | guess arrrghhh's phone blew up |
22:51.20 | rpierce99 | ah, awesome, it works |
22:51.31 | rpierce99 | +CREG: 1,1 |
22:51.33 | rpierce99 | OK |
22:51.38 | rpierce99 | $HTC_CSW:5,4 |
22:51.41 | rpierce99 | err |
22:51.43 | rpierce99 | HTC_CSQ |
22:52.08 | WisTilt2 | all that back from the first command? |
22:52.27 | rpierce99 | yeah, but the last one was delayed, like it was maybe unsolicited or something |
22:52.43 | WisTilt2 | ok send the CREG=2 then pull it again |
22:52.48 | *** join/#htc-linux programmer8922 (~Evan@67.219.164.162) |
22:53.00 | WisTilt2 | should get a lot more back |
22:53.12 | rpierce99 | well it'll have to be after a reboot, locked up again |
22:54.05 | WisTilt2 | so was that HTC_CSQ what contained the 5,4? |
22:54.13 | rpierce99 | yes |
22:54.17 | WisTilt2 | great |
22:54.21 | rpierce99 | got another one of those later with 6,4 |
22:54.44 | WisTilt2 | you have good signal where you are? |
22:55.01 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
22:55.13 | arrrghhh | phone didn't blow up, entirely. |
22:55.20 | rpierce99 | i get 5 bars in WinMo |
22:55.23 | arrrghhh | just can't be on IRC and blow up the radio. |
22:55.26 | WisTilt2 | small amount of smoke? |
22:55.29 | arrrghhh | but WisTilt2 i got all 3 commands to work |
22:55.30 | rpierce99 | err 6, whatever the highest is |
22:55.33 | arrrghhh | heh, just a small amount. |
22:55.48 | arrrghhh | rpierce99, i found if you adb in as it's booting, kill the ril and deal with it there it works a lot better. |
22:55.54 | WisTilt2 | did all 3 return info? |
22:55.59 | arrrghhh | although it still locked up on me, i was just able to get all 3 to work |
22:56.02 | arrrghhh | WisTilt2, yup! |
22:56.13 | arrrghhh | no clue if it's what you want, but they clearly returned distinct data. |
22:56.15 | WisTilt2 | let me put my glasses on... |
22:56.28 | arrrghhh | +CREG: 1,0 <-- from AT+CREG |
22:56.40 | arrrghhh | 99, 99 <--- from AT+CSQ |
22:56.52 | arrrghhh | 0,0 <---- from AT+CBC |
22:57.15 | WisTilt2 | ok, can you send AT+CREG=2 then pull it again |
22:57.26 | arrrghhh | damnit jim |
22:57.34 | arrrghhh | yes, but only because it's for you :P |
22:57.39 | WisTilt2 | :) |
22:57.42 | arrrghhh | i was hoping it was just those three ;) |
22:57.54 | WisTilt2 | whats your signal like? |
22:58.01 | arrrghhh | do you want me to do all 4 or just that one? |
22:58.06 | arrrghhh | it's pretty good i'd say |
22:58.07 | rpierce99 | I assume since this isn't a query i don't need the ?, but the \r? |
22:58.11 | arrrghhh | 3/4 bars in android |
22:58.18 | WisTilt2 | just AT+CREG=2 then AT+CREG? |
22:58.25 | arrrghhh | rpierce99, i'm sending them like this ----> echo -e "AT+CBC?\r" > /dev/smd0 |
22:58.41 | WisTilt2 | looks good to me |
22:58.43 | rpierce99 | yeah but with =2 it's not a query |
22:58.45 | rpierce99 | so no ? |
22:58.47 | rpierce99 | right? |
22:58.57 | WisTilt2 | to read yes |
22:58.59 | arrrghhh | oh i see what you're getting at. |
22:59.00 | arrrghhh | ok |
22:59.05 | arrrghhh | good point rpierce99 ;) |
22:59.13 | WisTilt2 | AT+CREG=2\r to send |
22:59.22 | arrrghhh | cool. brb again! |
23:00.33 | WisTilt2 | im really hoping to see more numbers after the 1,0 this time |
23:01.56 | rpierce99 | all i got was OK but it locked too |
23:02.09 | rpierce99 | so i couldn't send the AT+CREG? |
23:02.31 | WisTilt2 | was that after you sent the =2 cmd? |
23:02.34 | rpierce99 | yeah |
23:02.58 | WisTilt2 | so OK came back after that, then nothing from then on? |
23:03.28 | rpierce99 | it's not that nothing came back after that, it's just that after the OK returned I couldn't do anything because adb and phone were frozen |
23:03.42 | *** part/#htc-linux [Rapunzel] (~opera@nat004-252-205-109.tvoe.tv) |
23:03.54 | WisTilt2 | did you have the \r after the =2 |
23:04.06 | rpierce99 | yeah, without that I didn't get the OK it just froze immediately |
23:04.39 | rpierce99 | i was trying to do it while it booted as arrrghhh suggested, i'll try letting it go stable this time |
23:06.36 | *** join/#htc-linux thepace (thepace@cable-178-148-12-118.dynamic.sbb.rs) |
23:08.03 | *** join/#htc-linux DuperMan (~Duper@46-116-149-60.bb.netvision.net.il) |
23:08.22 | rpierce99 | ok, the =2 just returned OK |
23:08.50 | WisTilt2 | no lockup this time? |
23:08.57 | rpierce99 | no, lots of output |
23:09.06 | rpierce99 | does +CRING mean i'm getting a call |
23:09.11 | WisTilt2 | yep |
23:09.13 | rpierce99 | haha |
23:09.31 | rpierce99 | so that's going to mess with the output |
23:09.41 | jonpry | WisTilt2, the voltage readings from your original logs were much more realistic than the crap i am getting |
23:09.48 | rpierce99 | is there a line i'm looking for in this output |
23:09.50 | *** join/#htc-linux ftoz (~root@cst-prg-196-4.vodafone.cz) |
23:09.53 | rpierce99 | it seems stable right now |
23:10.16 | *** join/#htc-linux DuperGhost (~Duper@89-139-9-152.bb.netvision.net.il) |
23:10.21 | rpierce99 | the immediate response from my command was +CREG: 1,1 |
23:10.34 | *** join/#htc-linux arrrghhh (~arrrghhh@173-149-221-185.pools.spcsdns.net) |
23:10.37 | WisTilt2 | something like +CREG: 2,1,â0003â³,â00001B25â with different numbers |
23:10.44 | arrrghhh | getting blanko WisTilt2 |
23:10.46 | arrrghhh | just OK |
23:10.50 | arrrghhh | lots of OK's |
23:10.52 | arrrghhh | entered it A TON |
23:10.52 | WisTilt2 | jonpry: my phone is golden ya know. |
23:10.56 | arrrghhh | and just kept coming back with OK |
23:11.02 | rpierce99 | yeah i don't have a fancy CREG response |
23:11.04 | arrrghhh | beats up WisTilt2 for his phone |
23:11.04 | rpierce99 | just 1,1 |
23:11.22 | arrrghhh | mine is 1,0 |
23:11.31 | arrrghhh | +CREG: 1,0 then OK |
23:11.38 | WisTilt2 | but both you got the =2 cmd to return ok then you're still getting only those 2 numbers? |
23:11.50 | rpierce99 | arrrghhh: i got a call while cat ing, +CRING, haha |
23:11.54 | rpierce99 | yeah |
23:11.57 | arrrghhh | yea i cat that |
23:11.59 | arrrghhh | er |
23:12.00 | arrrghhh | saw |
23:12.01 | arrrghhh | jeebus. |
23:12.10 | WisTilt2 | ok see what you get from this AT+HTC_SRV_STATUS? |
23:12.16 | WisTilt2 | those are cdma world phone right? |
23:12.20 | rpierce99 | yes |
23:12.21 | arrrghhh | yes |
23:12.29 | WisTilt2 | that should return a bunch of stuff then |
23:12.30 | arrrghhh | all CDMA RHOD's are "world phones" |
23:12.32 | arrrghhh | all two of them. |
23:12.39 | arrrghhh | but i don't have a SIM card in it |
23:12.56 | WisTilt2 | without sim you might only get back a 99 or similar |
23:13.15 | rpierce99 | as I was typing that it finally locked up |
23:13.55 | WisTilt2 | jonpry: you mean the ramp type values or just the values themselves? |
23:14.20 | arrrghhh | rpierce99, yea no matter what method used it seems to lock up eventually. for whatever reason i just had better luck on boot. |
23:14.29 | jonpry | the measurements. like above 4 volts when fully charged :p |
23:14.33 | arrrghhh | as in it seemed to cooperate better on boot. |
23:15.56 | WisTilt2 | i dont remember, did any of my values start above 4000? i know one of the tests was 3800 or 3900. battery was only around 95% or so i think |
23:17.40 | dcordes | where is [Rapunzel] when you need him ;) |
23:18.18 | jonpry | WisTilt2, second log started at 4.093 |
23:18.51 | WisTilt2 | and you're not seeing anything that high from the tests today? |
23:19.37 | jonpry | i have more less verified that smem tops out at 3.85 |
23:20.56 | WisTilt2 | well, system panel market app reads smem and it show up to 4200mv so dont know why 3.8 would be a cap |
23:21.16 | WisTilt2 | i think spare parts does also |
23:21.27 | jonpry | system panel reads the /sys/devices deal |
23:21.45 | jonpry | which has camro scale factor applied :p |
23:21.53 | rpierce99 | # echo -e 'AT_HTC_SRV_STATUS?\r' > /dev/smd0 |
23:21.53 | rpierce99 | returned "ERROR" |
23:21.55 | camro | ? |
23:22.01 | jonpry | hi camro |
23:22.04 | camro | all clear in code ? |
23:22.07 | WisTilt2 | AT+ not AT_ |
23:22.10 | camro | hi jonpry |
23:22.11 | arrrghhh | rpierce99, not sure if it's required, but isn't it quotes? |
23:22.15 | arrrghhh | double quotes* |
23:22.21 | rpierce99 | darnit |
23:22.23 | jonpry | camro, clear enough anyways |
23:22.25 | arrrghhh | oh and at+ for sure. |
23:22.42 | rpierce99 | much better |
23:22.51 | arrrghhh | heh |
23:22.55 | rpierce99 | +HTC_SRV_STATUS: 0,2,"" |
23:23.12 | WisTilt2 | thats all it returned? |
23:23.16 | rpierce99 | then OK |
23:23.43 | rpierce99 | i also got HTC_SYSTYPE, HTC_CSQ, and HTC_3GIND but those pop up every now and then |
23:24.05 | arrrghhh | yea i think that's just ambient radio garbage |
23:24.11 | arrrghhh | which if RIL is killed, why are you getting it? |
23:24.12 | arrrghhh | odd. |
23:24.18 | arrrghhh | what do your signal bars show rpierce99 ? |
23:24.24 | rpierce99 | X |
23:24.25 | WisTilt2 | ok, can you send the =2 cmd then try the SRV_STATUS again |
23:24.31 | arrrghhh | well that's right. huh. |
23:24.40 | *** join/#htc-linux Ceesheim_ (~ceesheim@p508DFA63.dip.t-dialin.net) |
23:24.43 | WisTilt2 | arrrghhh, you're talking directly to the modem not via the daemon |
23:24.50 | arrrghhh | indeed |
23:25.04 | arrrghhh | but if the daemon is dead, why would there be ambient garbage spat out from the radio? |
23:25.23 | WisTilt2 | you're watching the modem channel |
23:25.23 | rpierce99 | unsolicited from the tower |
23:25.29 | arrrghhh | oh ok. |
23:25.31 | arrrghhh | that makes sense. |
23:25.35 | WisTilt2 | thats the stuff the daemon handles |
23:25.49 | WisTilt2 | kind of like doing a tcpdump |
23:25.58 | *** join/#htc-linux Drakh_ (Drakh@190.42.40.105) |
23:26.01 | arrrghhh | yea, after i thought about it, made a lot more sense. |
23:26.08 | arrrghhh | should think before he speaks/types :P |
23:26.29 | WisTilt2 | thats why when pierce saw the incoming call his phone didnt ring, rild wasnt up to handle it |
23:26.41 | arrrghhh | heh |
23:26.43 | arrrghhh | answer it manually! |
23:26.55 | WisTilt2 | couldnt. rild handles that also |
23:27.49 | arrrghhh | i know, it was a joke. |
23:28.07 | arrrghhh | manually answer the call |
23:28.11 | arrrghhh | pass the audio to the phone |
23:28.16 | arrrghhh | right? lol |
23:28.37 | WisTilt2 | like the old time operators did on the switchboards |
23:28.40 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host226-134-dynamic.25-79-r.retail.telecomitalia.it) |
23:29.35 | rpierce99 | sorry jonpry this is going to be hell on your logging, i've hard rebooted like 20 times now |
23:29.44 | arrrghhh | same heh |
23:29.53 | jonpry | yeah i need a continuous log |
23:29.57 | arrrghhh | wish there was a better way to interface with the radio. |
23:30.14 | arrrghhh | android doesn't like when you kill rild it seems. |
23:30.23 | rpierce99 | once we're done testing the radio we'll be a little nicer to it :) |
23:30.29 | jonpry | do either of you have a long one from after i made it 9 parameters? |
23:30.44 | arrrghhh | jonpry, eh maybe an hour or so |
23:30.46 | WisTilt2 | you guys can test jonprys stuff. we didnt get the lac and cid info i was hoping for so we'll have to dig further. |
23:31.03 | *** join/#htc-linux tyween (~tyween@pool-71-163-117-57.washdc.fios.verizon.net) |
23:31.07 | rpierce99 | i still haven't gotten the response from SRV_STATUS after running =2 |
23:31.35 | *** join/#htc-linux Curious_ (8bb3cf9a@gateway/web/freenode/ip.139.179.207.154) |
23:31.41 | jonpry | not really much testing to do. but if you guys end up rebooting anyways, you can use new scbs that should go to 100%, and you should turn off @4 |
23:31.58 | Curious_ | does anyone use CM- kernel that markinus pushed |
23:32.03 | Curious_ | for HD2 |
23:32.28 | arrrghhh | hd2 is dead |
23:32.31 | arrrghhh | tp2 is where it's at :P |
23:32.44 | rpierce99 | jonpry: my biggest log since then is 53kb, 603 entries |
23:33.01 | rpierce99 | sorry 604, 0-based :) |
23:34.06 | Curious_ | arrrghhh: haha |
23:34.16 | Curious_ | get out of your nirvana |
23:34.24 | arrrghhh | not there yet. |
23:34.34 | arrrghhh | we don't have a complete port like you guys do :P |
23:34.46 | arrrghhh | getting closer by the day tho |
23:34.51 | Curious_ | arrrghhh: man, keep some money and buy some new stuff:D |
23:35.00 | Curious_ | arrrghhh: in either way tp2 will fail:D |
23:35.04 | arrrghhh | or keep a lot of money and don't buy anything. |
23:35.09 | arrrghhh | why do you say it will fail? |
23:35.19 | arrrghhh | might just have to tell you good day sir |
23:35.27 | arrrghhh | stfu in internet lingo |
23:35.50 | Curious_ | hehe |
23:35.54 | Curious_ | sorry if i hurt u |
23:35.55 | Curious_ | :D |
23:36.01 | Curious_ | it has LOW HW POWER |
23:39.03 | arrrghhh | meh |
23:39.08 | arrrghhh | i'm A CHEAP BASTARD |
23:39.09 | arrrghhh | :P |
23:39.20 | arrrghhh | plus, there really isn't a replacement for this phone on the market. |
23:42.57 | jonpry | best watch out for low hardware power |
23:43.02 | jonpry | its going around these days |
23:43.09 | *** join/#htc-linux crawling (~crawling@a94-132-172-247.cpe.netcabo.pt) |
23:43.53 | arrrghhh | lol |
23:46.59 | jonpry | just got SOD |
23:48.04 | arrrghhh | bad service area? |
23:48.09 | Curious_ | haha |
23:48.13 | Curious_ | did u like it? |
23:48.17 | Curious_ | we had it long long time |
23:48.45 | arrrghhh | did you like it wtf |
23:48.45 | arrrghhh | lol |
23:48.54 | Curious_ | haha:D |
23:49.00 | Curious_ | how is battery life of tp23 |
23:49.01 | Curious_ | tp2 |
23:49.07 | arrrghhh | you guys always had a wrapped RIL didn't you? |
23:49.15 | arrrghhh | Curious_, 70+ hrs it seems. |
23:49.16 | jonpry | depends on how many batteries you have |
23:49.39 | Curious_ | oh |
23:49.42 | Curious_ | now i'm jealous |
23:49.42 | Curious_ | :D |
23:49.51 | Curious_ | arrrghhh: yeah we are very happy with it |
23:49.52 | arrrghhh | heh |
23:49.57 | Curious_ | cuz porting it becomes easier :D |
23:50.01 | arrrghhh | we have RIL issues causing SOD |
23:50.03 | *** join/#htc-linux Drakh_ (Drakh@190.42.40.105) |
23:50.09 | arrrghhh | which are hopefully being ironed out :D |
23:50.22 | phh | arrrghhh: ah it's really ril the problem ? |
23:50.28 | arrrghhh | phh, seems to be |
23:50.29 | arrrghhh | data channels |
23:50.33 | phh | i highly doubt it but well |
23:50.35 | jonpry | just start with phone that already runs android, ie repackaged desire, wrap an htc ril, and boom, instant port |
23:50.38 | phh | haha. |
23:50.44 | phh | we can't use rmnet, so i doubt it will really help |
23:50.45 | arrrghhh | boom! |
23:50.56 | phh | jonpry: yup, just try it ? |
23:51.01 | arrrghhh | phh, peoples that have consistent SOD have disabled data and SOD no more... |
23:51.05 | phh | TP2's code should work as is i think |
23:51.08 | jonpry | i don't have data |
23:51.15 | arrrghhh | jonpry, wtf |
23:51.17 | phh | jonpry: I mean make a test image ? :D |
23:51.38 | jonpry | phh, i was just making fun of leo |
23:51.38 | Curious_ | phh: let cotulla make a patch for u guyz |
23:51.45 | arrrghhh | well maybe there's more than one type of SOD :( |
23:51.46 | phh | Curious_: patch ? |
23:51.53 | phh | 1. it's just a wrapper |
23:51.57 | phh | 2. it's me who did it for HD2 |
23:52.01 | arrrghhh | lol |
23:52.03 | arrrghhh | seriously. |
23:52.10 | arrrghhh | cotulla didn't do the ril wrappin |
23:52.35 | arrrghhh | there's no world phone RIL blob |
23:52.37 | Curious_ | phh: for rmnet |
23:52.38 | arrrghhh | at least no source |
23:52.46 | *** join/#htc-linux Rajko (~Rajko@2001:470:1f0b:728:5d24:32d4:bd0d:18a5) |
23:52.52 | phh | Curious_: i'm not sure we want that ... |
23:52.58 | phh | Curious_: and rmnet works on HD2 now ? |
23:53.02 | Curious_ | why not |
23:53.04 | Curious_ | phh: yeah |
23:53.06 | Curious_ | pretty well |
23:53.12 | *** join/#htc-linux Drakh (Drakh@190.42.40.105) |
23:53.25 | phh | Curious_: ah you stopped having 5kB/s ? |
23:53.40 | *** join/#htc-linux DuperMan (~Duper@89-139-35-138.bb.netvision.net.il) |
23:53.53 | Curious_ | yeah:D |
23:54.04 | Curious_ | with the release of MAGLDR |
23:54.29 | arrrghhh | doesn't really help us then. |
23:54.30 | jonpry | also known as putting desire AMSS on hd2 |
23:54.51 | Curious_ | no we didn't put it |
23:55.03 | Curious_ | we have our own amss |
23:55.11 | *** join/#htc-linux Drakh_ (Drakh@190.42.70.170) |
23:55.25 | phh | yeah sure, you created your own amss \o/ |
23:55.36 | Curious_ | no default |
23:55.38 | Curious_ | wince amss |
23:55.39 | phh | time to go to bed and watch TV while sleeping. |
23:55.43 | phh | ah ok |
23:55.48 | phh | you said it's patched -_-' |
23:56.08 | dcordes | [ 231.497558] qmi: wds: network start failed (000e) |
23:56.17 | dcordes | wtf |
23:58.18 | arrrghhh | Drakh, needs to learn to ghost :P |
23:58.48 | *** join/#htc-linux DuperGhost (~Duper@89-139-38-173.bb.netvision.net.il) |