00:01.50 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
00:02.36 | *** join/#htc-linux M1DLGpc_ (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
00:03.21 | *** join/#htc-linux m3dlg (~m3dlg@bb-87-81-252-83.ukonline.co.uk) |
00:03.24 | cr2_ | 0000a6c0 <rpc_pdsm_atl_session_handle_operation_f_type_svc>: |
00:03.26 | cr2_ | <PROTECTED> |
00:03.27 | cr2_ | <PROTECTED> |
00:03.35 | cr2_ | this is nice assembler code :) |
00:05.00 | cr2_ | oO |
00:05.08 | cr2_ | tmzt: is it fp math ? |
00:05.12 | cr2_ | <PROTECTED> |
00:05.14 | cr2_ | <PROTECTED> |
00:05.15 | cr2_ | <PROTECTED> |
00:05.21 | ToAsTcfh | omg it takes for evwer to compile a few changes now |
00:07.03 | MrPippy | Markinus: how did you figure out that topaz needed that extra vreg for BT? |
00:07.20 | cr2_ | MrPippy: i put it into MSM_VREG |
00:07.21 | Markinus | MrPippy: I looked in the wiki :) |
00:07.27 | cr2_ | lol |
00:07.58 | cr2_ | MrPippy: if you don't have DEX1: in bt_uart dll, then you don't need vreg |
00:08.11 | cr2_ | MrPippy: it's all about gpio config then |
00:08.20 | cr2_ | since your irq is ok |
00:08.43 | cr2_ | haha |
00:08.47 | cr2_ | <PROTECTED> |
00:08.49 | cr2_ | <PROTECTED> |
00:09.58 | cr2_ | Markinus: this looks familiar |
00:10.01 | cr2_ | <PROTECTED> |
00:10.31 | cr2_ | <PROTECTED> |
00:10.55 | cr2_ | hm where is the disassemble.py by pH5 ? |
00:10.57 | Markinus | cr2_: libgps? |
00:11.03 | cr2_ | yes |
00:11.11 | bzo | cr2_: here is a bt gpio trace MrPippy did: http://pastebin.com/f5699e35f |
00:11.15 | bzo | 3-14 seems to be power |
00:11.21 | bzo | is it odd that we don't see a reset toggle? |
00:12.07 | cr2_ | bzo: it may be very fast |
00:12.12 | cr2_ | <PROTECTED> |
00:12.27 | cr2_ | Markinus: it seems that atl also has the same VERS |
00:12.36 | cr2_ | but i've not seen it in the rpc fifo |
00:12.58 | *** join/#htc-linux nemasu (WinNT@S01060013727f792c.ed.shawcable.net) |
00:13.23 | bzo | MrPippy: could it be that we need to find the correct reset then? |
00:13.30 | bzo | RAPH100_BT_RST is clearly wrong, since it kills usb |
00:13.32 | Markinus | cr2_: yes, I tkin we can good see in the one version header file from herao that now most of the Versions are 10001. I think they have enough too :) |
00:14.10 | cr2_ | Markinus: the clock (0xf) version is =0 |
00:14.47 | Markinus | cr2_: ok, al noticed . . |
00:15.09 | cr2_ | bzo: it should be possible to mmutrace the gpio reg and find the dll which calls it |
00:15.25 | cr2_ | bzo: then it's necessary to disassemble this dll. |
00:16.26 | bzo | that's a bit beyond my expertise, but hopefully MrPippy will be up to the task :) |
00:16.52 | cr2_ | 0000c3d0 <rpc_pdsm_xtra_t_event_f_type_0xab221027_svc>: |
00:16.54 | cr2_ | <PROTECTED> |
00:16.55 | cr2_ | <PROTECTED> |
00:17.09 | cr2_ | Markinus: another possible gps version on nexus ? |
00:17.50 | Markinus | hmm . .intresting |
00:18.41 | cr2_ | rpc_pdsm_client_xtra_t_reg_0xa60286b0 |
00:20.03 | Markinus | hmm |
00:21.36 | cr2_ | Program Header: |
00:21.38 | cr2_ | 0x70000001 off 0x00011e90 vaddr 0x00011e90 paddr 0x00011e90 align 2**2 |
00:21.54 | Markinus | cr2_: we have on Topaz 30000061(pmic?) too, maybe we have to do something more with it? |
00:22.01 | Markinus | sound? |
00:22.03 | cr2_ | which compiler did they use ? their binutils does not know this segment type |
00:22.15 | MrPippy | cr2_: 'DEX1' isn't found in any driver in this kitchen |
00:22.38 | cr2_ | Markinus: its on raph too, but not used |
00:22.47 | cr2_ | MrPippy: strings -el ? |
00:23.30 | Markinus | cr2_: ok |
00:24.44 | *** join/#htc-linux stinebd (~bryan@gentoo/developer/battousai) |
00:29.15 | cr2_ | <PROTECTED> |
00:29.17 | cr2_ | <PROTECTED> |
00:29.31 | cr2_ | aha. it's 3000001d in thumb |
00:29.42 | cr2_ | ATL rpc |
00:32.54 | cr2_ | ok, here they are |
00:32.57 | cr2_ | <PROTECTED> |
00:32.59 | cr2_ | <PROTECTED> |
00:33.00 | cr2_ | <PROTECTED> |
00:33.02 | cr2_ | <PROTECTED> |
00:33.48 | cr2_ | looks like wiki value |
00:33.51 | cr2_ | <PROTECTED> |
00:34.42 | cr2_ | ok, different version here too |
00:34.45 | cr2_ | <PROTECTED> |
00:34.47 | cr2_ | <PROTECTED> |
00:34.48 | cr2_ | <PROTECTED> |
00:34.50 | cr2_ | <PROTECTED> |
00:34.57 | cr2_ | [01:16] <cr2_> 0000c3d0 <rpc_pdsm_xtra_t_event_f_type_0xab221027_svc>: |
00:35.26 | cr2_ | wtf they compile it as thumb |
00:36.38 | cr2_ | ok, good night |
00:37.28 | Markinus | good night |
00:44.33 | *** join/#htc-linux x00110001 (~00110001@73.108.235.77.dyn.idknet.com) |
00:45.22 | *** part/#htc-linux x00110001 (~00110001@73.108.235.77.dyn.idknet.com) |
00:50.00 | tmzt | cr2: not an arm asm person yet |
00:54.28 | tmzt | unt: accprding to Palm people vfp and neon help alot |
00:54.30 | *** join/#htc-linux Zeman4323 (~mzeman@c-71-239-97-204.hsd1.il.comcast.net) |
00:55.28 | tmzt | bypass mux? |
00:55.48 | MrPippy | tmzt: is there a registry key you can set to log the AT cmds from the ril? |
01:00.18 | tmzt | sine: talk to San about genext2fs |
01:00.27 | *** join/#htc-linux M1DLGpc_ (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
01:00.43 | tmzt | adding permissions to the inode wrtie shouldn't be too hard though |
01:03.53 | tmzt | we can read a client table from ce and close on boot? |
01:04.00 | tmzt | cr2: |
01:12.48 | tmzt | MrPippy: yeah |
01:13.08 | tmzt | should be /Software/HTC/AtDbgLog=1 |
01:13.11 | tmzt | reboot |
01:13.16 | tmzt | change mode |
01:13.18 | tmzt | disable |
01:13.20 | tmzt | reboot |
01:14.27 | MrPippy | ok cool |
01:15.22 | tmzt | if we can figure out cdma/global it would be helpful |
01:16.37 | MrPippy | do you think its just AT cmds that do the switch? |
01:18.28 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
01:18.44 | tmzt | I think |
01:18.49 | tmzt | but I don't know |
01:22.36 | *** join/#htc-linux JairunCaloth (~m00@c-24-98-17-158.hsd1.ga.comcast.net) |
01:23.09 | randomblame | I'm so desperate for a frame buffer I just spent an hour trying to get the pxa frame buffer working |
01:23.17 | randomblame | disgusting yes evil a little |
01:23.31 | randomblame | failure? completely |
01:23.52 | tmzt | huh? |
01:23.59 | tmzt | why would you try that? |
01:24.20 | randomblame | why not? |
01:24.24 | randomblame | everything else fails |
01:24.37 | tmzt | doesn't mean pxa/sa will succeed |
01:24.45 | tmzt | it fails because msmfb is weird |
01:24.45 | randomblame | of course not, I had no hope for it |
01:24.59 | tmzt | why doesn't msmfb work for you? |
01:25.08 | randomblame | yes, it goes grey screen, hangs on installing 240x400 panel |
01:25.13 | tmzt | just a panic/oops? |
01:25.18 | tmzt | try 240x240 |
01:25.47 | randomblame | you really thing the resolution could be the culprit? I'd not thought so horribly out of the box yet |
01:26.08 | tmzt | no but 240x240 might work |
01:26.13 | tmzt | it will just be short |
01:26.17 | tmzt | then you'll know |
01:26.17 | randomblame | hmm easy to try |
01:26.32 | randomblame | thanks for the idea |
01:26.37 | tmzt | if it doesn't try programming the hardware the way htcfbcon does |
01:26.44 | tmzt | but don't init the lcd |
01:27.20 | randomblame | yes I'd thought about going full blown hard coded like htc_fb |
01:27.47 | tmzt | I so want to start over with drm |
01:29.04 | randomblame | trying to get market place to work? |
01:29.15 | tmzt | huh? |
01:29.27 | tmzt | direct rendering manager |
01:29.38 | randomblame | lol thought digital rights management |
01:29.42 | randomblame | the dirty drm |
01:29.46 | tmzt | port mdp driver from 7x27 |
01:30.00 | randomblame | that would be shiny |
01:30.18 | randomblame | properly implemented that would make it much easier to port devices |
01:30.26 | tmzt | we need to be able to control this hardware remotely |
01:30.43 | tmzt | so we can init/reinit it from a desktop |
01:30.53 | tmzt | and not worry about the local framebuffer |
01:31.03 | randomblame | that would cool as hell |
01:31.20 | randomblame | also need a haret 4 linux |
01:31.49 | tmzt | we can make uboot work in both environements as a user program |
01:32.16 | randomblame | not so much as a bootloader more the reverse engineering aspect |
01:33.11 | tmzt | right |
01:33.47 | tmzt | if haret can work with ce running it can run under linux too |
01:34.01 | tmzt | we just have to take the relevant parts of colinux |
01:34.22 | tmzt | and port them to arm |
01:37.01 | randomblame | ok trying 240x240 now |
01:37.40 | randomblame | what a sad rez |
01:38.24 | randomblame | grey screen, gotta check the ram console but it probably hung at the same place |
01:38.58 | tmzt | so that's probably not it |
01:38.59 | *** part/#htc-linux Cass (~Cass@cass.demon.co.uk) |
01:38.59 | randomblame | I'm using dummy mddi client, because it's the only thing that doesn't cause panic |
01:39.11 | tmzt | maybe your vsync irc is somehow different? |
01:39.21 | *** join/#htc-linux Cass (~Cass@cass.demon.co.uk) |
01:39.30 | randomblame | I don't think it's vsync |
01:39.57 | tmzt | please just noop toshiba or similar |
01:40.03 | tmzt | dummy is broken |
01:40.08 | tmzt | it doesn't register |
01:40.53 | randomblame | I can get the others to register but msm_fb never starts |
01:41.03 | *** join/#htc-linux jamenlang (~jamenlang@209-193-77-154.mammothnetworks.com) |
01:41.16 | tmzt | but you comment out all of the lcd init in them? |
01:41.46 | tmzt | including power? |
01:42.09 | randomblame | no I got nt35399 working without nooping it |
01:42.23 | tmzt | that's yours? |
01:42.29 | tmzt | what do you mean working? |
01:42.29 | randomblame | no mine is ilitek |
01:42.37 | randomblame | I mean registered |
01:42.51 | randomblame | and the kernel continues after it outputs its messages without ever loading msmfb |
01:43.31 | tmzt | the clients are diffefrent |
01:43.49 | tmzt | until somebody documents your init you need to no'op it |
01:44.22 | randomblame | kk everything including vsync and panel init |
01:44.37 | tmzt | not vsync |
01:44.45 | tmzt | just look at gito |
01:45.02 | randomblame | gito? |
01:45.23 | *** join/#htc-linux jeremychang (~jeremycha@61.57.131.211) |
01:45.43 | tmzt | gitorious.org search qualcomm |
01:45.47 | tmzt | linux-msm |
01:45.51 | tmzt | htc-2.6.29 |
01:46.34 | randomblame | this is all based off that git repo - 2.6.27 tho, does the .29 branch have nice no op'd examples for me? |
01:47.46 | tmzt | check toshi client |
01:48.02 | *** join/#htc-linux ali1234 (~al@robotfuzz.co.uk) |
01:48.06 | randomblame | ok |
01:49.11 | *** join/#htc-linux DaveWM (dave@h-96-13-115-180.ip.alltel.net) |
01:52.40 | randomblame | gitorious is painfully slow |
01:58.18 | randomblame | theres more lines in that toshiba client than there are in the 2.6.27 version |
01:59.08 | randomblame | it doesn't look noopd |
02:00.26 | randomblame | and nothing's hard coded in mddi.c or msm_fb, it's too clean and legit ha I'll try that client though with a few if 0's |
02:02.57 | JairunCaloth | what is nooped? |
02:04.02 | randomblame | blue |
02:04.13 | randomblame | commented |
02:04.28 | JairunCaloth | ah |
02:05.37 | randomblame | hmm glad I checked ramconsole, 240x240 was not tested I ran the wrong kernel |
02:05.42 | randomblame | gonna check that first |
02:09.18 | randomblame | nope nothin but net |
02:10.36 | *** join/#htc-linux sindre (~sindre@c010ABF51.dhcp.bluecom.no) |
02:12.45 | randomblame | trying that toshiba client with no changes first |
02:13.23 | randomblame | crash before grey screen, |
02:16.00 | randomblame | that client crashes right after vsync on gpio 97 now 0 |
02:16.26 | tmzt | haret trace vsync |
02:16.30 | tmzt | crashes how? |
02:17.08 | randomblame | phone rebooted once, and showed a not syncing panic the second time |
02:17.42 | tmzt | ignore not syncing |
02:17.47 | tmzt | that's a panic |
02:17.51 | randomblame | yep |
02:17.53 | tmzt | look at the oops |
02:18.10 | tmzt | haret trace vsync |
02:18.15 | tmzt | make sure it's 97 |
02:18.18 | tmzt | but it should be |
02:18.44 | randomblame | how do I do that, I know it should cycle at 60hz but what command |
02:19.19 | tmzt | I thought all the clients we're if 0'd |
02:19.44 | tmzt | addlist traces irqs |
02:19.54 | tmzt | wi 5 |
02:21.05 | *** join/#htc-linux mcdull (~blackston@n11648167249.netvigator.com) |
02:21.32 | randomblame | this is toshiba client from 2.6.29 without any changes |
02:25.05 | tmzt | is most of the code no'oped if not you have the wrong client or version |
02:25.20 | randomblame | nope it's all there and clean |
02:25.41 | randomblame | http://gitorious.org/linux-on-qualcomm-s-msm/linux-msm/blobs/raw/htc-msm-2.6.29/drivers/video/msm/mddi_client_toshiba.c |
02:28.29 | randomblame | hmm the only gpio that's cycling that fast is 236 |
02:28.58 | randomblame | with all the radios disabled I'd guess it to be that |
02:29.43 | randomblame | watch gpios should pick it up right |
02:32.32 | randomblame | that switches every 0.003 seconds |
02:33.08 | randomblame | or 0.006 seconds for a full cycle on off |
02:34.59 | randomblame | that seems faster than 60hz though |
02:40.02 | *** join/#htc-linux jumoit (~samuel@121.77.87.145) |
02:43.47 | randomblame | the toshiba client from the 2.6.25 branch is significantly smaller but no comments, still over 100 lines less and looks much simpler, I'll try it |
02:57.38 | *** join/#htc-linux MrPippy_ (~pip@adsl-75-42-163-160.dsl.sndg02.sbcglobal.net) |
03:10.32 | *** join/#htc-linux marex (~marex@vasut.kolej.mff.cuni.cz) |
03:18.57 | ToAsTcfh | bzo: http://forum.xda-developers.com/showthread.php?t=630899 i posted this thread in opes to find a solution. i linked u in the first post. if i need to add something let me know as i dont want to have give false info on someone elses work. have a look please and pm me on xda if i need to add or remove something. thanx |
03:31.15 | tmzt | 236 is in ()? |
03:31.29 | tmzt | randomblame: |
03:32.25 | *** join/#htc-linux Alka (~Alka@189.174.0.118) |
03:39.27 | *** join/#htc-linux nozze (~nozze@u193-11-162-41.studentnatet.se) |
03:44.31 | *** part/#htc-linux nemasu (WinNT@S01060013727f792c.ed.shawcable.net) |
03:45.14 | *** join/#htc-linux Unholy_ (~IceChat7@24.227.27.77) |
03:54.26 | *** join/#htc-linux Zoolooc_ (~fredsibar@p54957214.dip.t-dialin.net) |
04:03.56 | *** join/#htc-linux rashire (~ed1112war@98.114.89.97) |
04:07.29 | *** join/#htc-linux nacho-g (~nacho-g@190.189.189.218) |
04:28.17 | *** join/#htc-linux nacho-g (~nacho-g@190.178.143.237) |
04:33.33 | *** join/#htc-linux lilsnoop (~lilsnoop@ip68-229-4-180.lv.lv.cox.net) |
04:34.31 | lilsnoop | using the new 3/1 build...on my raph110...was working fine, my keyboard stopped working though |
04:36.58 | *** join/#htc-linux mcdull (~blackston@n11648167249.netvigator.com) |
04:46.12 | *** join/#htc-linux sowfeast (~jeffehry@87-194-37-176.bethere.co.uk) |
04:46.36 | sowfeast | hello all. just had a look at the wiki - is the leo pretty much documented now? |
04:48.26 | tmzt | build of? |
04:48.41 | tmzt | sowfeast: I don't think it's done |
04:48.50 | tmzt | a lot of progress though |
04:49.09 | sowfeast | right - i noticed the red links were blue on the wike |
04:49.11 | sowfeast | wiki |
04:49.25 | sowfeast | i'm colourblind to red hence i notice that colour more than others |
04:49.48 | sowfeast | good to see progress has been made - anything committed to git? |
04:52.52 | tmzt | try a user.css? |
04:53.36 | tmzt | I don't know about git |
04:53.45 | tmzt | I think they are stkill tearing apart the gps |
05:08.28 | *** join/#htc-linux goxboxlive (~jrs@mail2.hjellnesconsult.no) |
05:09.48 | *** join/#htc-linux MxxCon (donuts@ool-18b9baa8.dyn.optonline.net) |
05:11.30 | JairunCaloth | this kernel is so going to crash and burn |
05:12.15 | JairunCaloth | still trying to get xf86-video-msm working on the N1 |
05:13.13 | MxxCon | hey folks. do you know who did keyboard mapping for rhod phones? |
05:16.45 | randomblame | tmzt: yes (236) |
05:17.22 | randomblame | but even divided by two thats over 120hz |
05:17.39 | randomblame | unless haret is reading the timing wrong |
05:17.41 | JairunCaloth | yup crash and burn |
05:17.55 | lilsnoop | where can i get the nexus one live wall papers for my fuze? |
05:19.39 | *** join/#htc-linux DaveWM (dave@h-98-134-63-134.ip.alltel.net) |
05:20.59 | JairunCaloth | herm... wonder how this htc leo kernel will fare on the N1 |
05:22.19 | *** join/#htc-linux jamenlang2 (~jamenlang@68.170.60.12) |
05:23.48 | randomblame | meh I'll try that gpio, I have a feeling it's usb or something else though |
05:26.22 | Scepterr | JairunCaloth what benefits would that have ? |
05:26.29 | randomblame | that wasn't it :D |
05:26.56 | JairunCaloth | Scepterr: no idea... mebe they have fbconsole working though |
05:27.31 | Scepterr | got a tmo us hd2 today :) |
05:28.00 | Scepterr | makes my nexus look small ;/ |
05:28.19 | JairunCaloth | looks like they have the normal N1 msm framebuffer crap |
05:28.21 | JairunCaloth | :/ |
05:28.38 | JairunCaloth | *sigh* |
05:28.48 | MxxCon | (does android's app store supposed to work on htc tp2?) |
05:28.54 | randomblame | anyone know if theres a command in haret to watch a specific gpio |
05:29.05 | randomblame | besides just ibiting everything else |
05:31.40 | *** join/#htc-linux tehtrk (~tehtrk@rrcs-24-173-220-30.sw.biz.rr.com) |
05:40.00 | JairunCaloth | bleh I guess I'll see if the latest CAF kernel boots. |
05:40.26 | JairunCaloth | needs to learn how to hack shit from different kernels together. |
05:47.31 | *** join/#htc-linux MrPippy_ (~pip@adsl-75-42-163-160.dsl.sndg02.sbcglobal.net) |
05:48.10 | *** join/#htc-linux Unholy_ (~IceChat7@24.227.27.77) |
05:51.04 | tmzt | randomblame: the one in parens is just the ibit value |
05:51.12 | tmzt | what does it way before that? |
05:51.20 | tmzt | it's not 60Hz that Know of |
05:51.24 | tmzt | hmm |
05:52.06 | randomblame | oh I must have read it wrong I'll do it again |
05:58.43 | *** part/#htc-linux MxxCon (donuts@ool-18b9baa8.dyn.optonline.net) |
06:02.07 | *** join/#htc-linux tehtrk (~tehtrk@rrcs-24-173-220-30.sw.biz.rr.com) |
06:09.03 | randomblame | tmzt odd in1: in1-12(236)=0 |
06:09.15 | lilsnoop | is there a way to get out of android other than pulling battery or reset? |
06:09.24 | lilsnoop | like a restart option? |
06:32.28 | *** join/#htc-linux mcdull (~mcdull@203.210.9.171) |
06:33.35 | randomblame | I forgot I have to run haret 0.5.1 to properly poll gpios on this |
06:34.08 | *** join/#htc-linux Unholy_ (~IceChat7@24.227.27.77) |
06:40.31 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
06:49.19 | randomblame | oh my god I hate myself |
06:49.29 | randomblame | I just found my client driver |
06:49.38 | randomblame | written specifically for my mddi client |
06:58.21 | *** join/#htc-linux tmzt (~tmzt@adsl-99-164-34-42.dsl.akrnoh.sbcglobal.net) |
06:58.48 | randomblame | tmzt: I hate myself at the moment |
06:59.27 | randomblame | I never bothered to look within the lg eves source for any mddi clients |
06:59.49 | randomblame | I just found innotek driver mddi client driver I needed |
07:02.38 | tmzt | ah cool |
07:02.54 | tmzt | irssi just opened a query to everybody |
07:03.51 | *** part/#htc-linux tmzt (~tmzt@adsl-99-164-34-42.dsl.akrnoh.sbcglobal.net) |
07:04.38 | *** join/#htc-linux tmzt (~tmzt@adsl-99-164-34-42.dsl.akrnoh.sbcglobal.net) |
07:05.10 | tmzt | back hopefully to stay |
07:09.56 | *** join/#htc-linux droid001 (~g1@p4FDC99CA.dip.t-dialin.net) |
07:10.42 | *** join/#htc-linux droid001 (~g1@p4FDC99CA.dip.t-dialin.net) |
07:11.44 | *** join/#htc-linux tmzt (~tmzt@99.164.34.42) |
07:15.55 | *** join/#htc-linux tmzt (~tmzt@adsl-99-164-34-42.dsl.akrnoh.sbcglobal.net) |
07:21.27 | *** join/#htc-linux tmzt (~tmzt@adsl-99-164-34-42.dsl.akrnoh.sbcglobal.net) |
07:38.40 | randomblame | lol you're having some trouble eh |
07:39.12 | tmzt | yep somebody rebooted my nas |
07:39.29 | tmzt | and irssi is only now learned my channels but it opened all my queries ever |
07:39.36 | tmzt | and I couldn't find the channels |
07:39.55 | randomblame | lol |
07:55.34 | *** join/#htc-linux tehtrk (~tehtrk@rrcs-24-173-220-30.sw.biz.rr.com) |
08:02.59 | *** join/#htc-linux BabelO (~fcr@unaffiliated/babelo) |
08:09.09 | *** join/#htc-linux tehtrk (~tehtrk@rrcs-24-173-220-30.sw.biz.rr.com) |
08:26.22 | *** join/#htc-linux shoragan (~shoragan@sicherheitsschwankung.de) |
08:26.23 | *** join/#htc-linux shoragan (~shoragan@debian/developer/shoragan) |
08:28.49 | *** join/#htc-linux |Jason8| (JayAte@2001:470:1f07:714::15e) |
08:40.52 | *** join/#htc-linux MrPippy_ (~pip@adsl-75-42-163-160.dsl.sndg02.sbcglobal.net) |
08:41.24 | *** join/#htc-linux GeertJohan (~Squarc@82-217-32-29.cable.quicknet.nl) |
08:56.57 | *** join/#htc-linux JoshuaL (~JoshuaL@cable-92-43.zeelandnet.nl) |
08:59.19 | JoshuaL | with the latest build 3G and wifi or not working. It detects 3G fine but it does not make a connection |
08:59.28 | JoshuaL | running a diam100 |
09:00.36 | *** join/#htc-linux Cass (~Cass@cass.demon.co.uk) |
09:01.06 | MrPippy | have you tried the latest rootfs from http://xdandroid.southcape.org/rootfs/ |
09:02.22 | JoshuaL | no, let me try that :) |
09:04.39 | *** part/#htc-linux Cass (~Cass@cass.demon.co.uk) |
09:04.43 | *** join/#htc-linux Cass (~Cass@cass.demon.co.uk) |
09:08.36 | JoshuaL | MrPippy, that did the trick, thanks |
09:11.20 | *** join/#htc-linux Liquidsilver (~vadmin@cpc3-nthc6-0-0-cust800.nrth.cable.ntl.com) |
09:13.45 | *** join/#htc-linux leobaillard (~leobailla@ip-89.net-82-216-212.roubaix.rev.numericable.fr) |
09:21.52 | *** join/#htc-linux maejrep[w] (~madCoder@68.64.144.211) |
09:22.24 | *** join/#htc-linux MrPippy (~pip@adsl-75-11-160-192.dsl.sndg02.sbcglobal.net) |
09:24.49 | *** join/#htc-linux Captnoord (~Captnoord@dc5147a47b.adsl.wanadoo.nl) |
09:28.47 | lilsnoop | MrPippy saves the day again |
09:29.16 | MrPippy | hehe i don't know why they put out that xdandroid release with such a giant bug |
09:29.45 | lilsnoop | very true, the data just doesn't work |
09:29.56 | lilsnoop | the only one I've ever loaded where that happened |
09:30.51 | lilsnoop | I'm trying to load the N1 live wall papers on my phone and I don't think it is possible |
09:33.07 | *** join/#htc-linux kvaster (~kvaster@93.84.112.80) |
09:34.21 | *** join/#htc-linux mickey|office (~Mickey@dialbs-092-079-168-007.static.arcor-ip.net) |
09:40.51 | *** join/#htc-linux mcdull (~mcdull@203.210.9.171) |
09:46.04 | *** join/#htc-linux kiozen (~oeichler@p5492117B.dip0.t-ipconnect.de) |
09:49.34 | *** join/#htc-linux maejrep[w] (~madCoder@68.64.144.211) |
09:55.48 | *** part/#htc-linux Cass (~Cass@cass.demon.co.uk) |
10:01.36 | *** join/#htc-linux Cass (~Cass@nat/sun/x-sbanjverfpsrejhd) |
10:23.37 | *** join/#htc-linux GNUtoo (~GNUtoo@host200-162-dynamic.51-79-r.retail.telecomitalia.it) |
10:42.43 | *** join/#htc-linux GlemSom (~gsommer@194.192.93.101) |
10:43.05 | *** join/#htc-linux DJWillis (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) |
10:51.10 | *** join/#htc-linux Sindre (~Sindre@77-110-193-140.network.itconnect.no) |
10:54.57 | *** join/#htc-linux sxe (~quassel@ip-62-143-102-161.unitymediagroup.de) |
10:59.58 | *** join/#htc-linux m3dlg (~m3dlg@212.183.140.36) |
11:35.06 | *** join/#htc-linux Sindre (~Sindre@77-110-193-140.network.itconnect.no) |
11:59.38 | *** join/#htc-linux mcdull (~mcdull@203.210.9.171) |
12:02.57 | *** join/#htc-linux irlolcopter_ (~irlolcopt@host81-153-254-123.range81-153.btcentralplus.com) |
12:17.24 | *** join/#htc-linux Untouchab1e (~Untouchab@82.147.44.130) |
12:33.52 | *** join/#htc-linux |Jason8| (JayAte@2001:470:1f07:714::15e) |
12:50.22 | *** join/#htc-linux Unholy (~4c4cc392@gateway/web/freenode/x-zqkfdwlpxlnxaaqh) |
12:50.47 | Unholy | yo |
12:58.34 | *** join/#htc-linux vall (~val@lgx22-1-88-168-244-3.fbx.proxad.net) |
13:04.26 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
13:16.42 | *** join/#htc-linux Wr4i7h (~abc@89.181.81.56) |
13:18.51 | *** join/#htc-linux M1DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
13:19.20 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-blumlvhkzfxlsclv) |
13:42.02 | *** join/#htc-linux m3dlg (~m3dlg@212.183.140.52) |
13:45.22 | balsat | anyone got the xorg-video-msm working on the diamond/raph |
13:59.27 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
14:02.09 | *** join/#htc-linux unholy (~4c4cc392@gateway/web/freenode/x-isogzhofyqturkqn) |
14:09.25 | *** join/#htc-linux GNUtoo|oeee (~GNUtoo@host200-162-dynamic.51-79-r.retail.telecomitalia.it) |
14:10.11 | *** join/#htc-linux karafa (~karafa@ool-45735dce.dyn.optonline.net) |
14:23.53 | *** join/#htc-linux Scepterr69 (~scepterr@ool-18b92277.dyn.optonline.net) |
14:28.06 | *** join/#htc-linux The-Compiler (~compiler@unaffiliated/the-compiler) |
14:34.57 | *** join/#htc-linux Sindre (~Sindre@c010ABF51.dhcp.bluecom.no) |
14:35.55 | *** join/#htc-linux GNUtoo|oeee (~GNUtoo@host200-162-dynamic.51-79-r.retail.telecomitalia.it) |
14:37.31 | *** join/#htc-linux surge (surge@pool-98-118-154-21.bflony.fios.verizon.net) |
14:44.33 | *** join/#htc-linux AndroHQuist (~AndroHQui@host-90-235-182-48.mobileonline.telia.com) |
14:45.21 | *** part/#htc-linux droid001 (~g1@p4FDC99CA.dip.t-dialin.net) |
14:57.31 | *** join/#htc-linux mickey|office (~Mickey@dialbs-092-079-168-007.static.arcor-ip.net) |
15:15.40 | *** join/#htc-linux bartman (~bart@tau.jukie.net) |
15:32.56 | *** join/#htc-linux dekar (~dekar@e179090055.adsl.alicedsl.de) |
15:34.23 | *** join/#htc-linux Markinus (~Miranda@gtng-4db046bc.pool.mediaWays.net) |
15:36.18 | *** join/#htc-linux rafyvitto (~rafyvitto@32.140.127.38) |
15:39.37 | *** join/#htc-linux m3dlg (~m3dlg@212.183.140.7) |
15:46.17 | *** join/#htc-linux Bry8Star (~Bry8Star@cpe-76-170-247-232.socal.res.rr.com) |
15:47.57 | *** join/#htc-linux evildarknight (~charles@41.207.129.233) |
16:10.59 | *** join/#htc-linux Deubeuli1u (deubeuliou@sd-11284.dedibox.fr) |
16:14.51 | *** join/#htc-linux swc|666 (~infidel20@unaffiliated/swc666/x-4934821) |
16:18.23 | *** join/#htc-linux jamenlang2 (~jamenlang@68.170.60.12) |
16:40.03 | *** join/#htc-linux Captnoord (~Captnoord@dc5147a47b.adsl.wanadoo.nl) |
16:40.46 | Captnoord | yo |
16:42.46 | *** part/#htc-linux jumoit (~samuel@121.77.87.145) |
16:43.11 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
16:43.23 | *** join/#htc-linux Vito_ (~quassel@195.113.242.148) |
16:47.40 | *** join/#htc-linux MrPippy (~pip@adsl-75-11-160-192.dsl.sndg02.sbcglobal.net) |
16:50.18 | *** join/#htc-linux GNUtoo (~GNUtoo@host200-162-dynamic.51-79-r.retail.telecomitalia.it) |
16:55.26 | vall | hi |
16:57.02 | Captnoord | yo |
16:57.24 | vall | Captnoord: fine ? |
16:57.39 | Captnoord | what? |
16:57.52 | Captnoord | i'm pseudo relaxed |
16:57.57 | Captnoord | if your asking that |
16:58.07 | vall | yep |
16:58.33 | vall | do you know how work msm7200 MPUs ? |
16:58.42 | Captnoord | nope |
16:58.44 | Captnoord | brb |
16:59.08 | vall | sorry, brb ? |
16:59.19 | Captnoord | be right back |
16:59.48 | vall | ok, thank |
17:00.11 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
17:06.26 | Captnoord | re |
17:08.19 | *** join/#htc-linux unholy (~4c4cc392@gateway/web/freenode/x-napxmgdjkgmaiaca) |
17:10.42 | *** join/#htc-linux Sindre (~Sindre@c010ABF51.dhcp.bluecom.no) |
17:13.38 | *** join/#htc-linux toi (~toi@d54C2A96D.access.telenet.be) |
17:27.58 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
17:29.10 | ToAsTcfh | phh: u around? |
17:30.06 | unholy | this been quiet for a few hours |
17:30.21 | ToAsTcfh | oh |
17:30.33 | ToAsTcfh | i got the htc legend leak |
17:30.42 | ToAsTcfh | its msm7k |
17:30.46 | ToAsTcfh | 600mhz |
17:31.08 | unholy | hmm never heard of it |
17:31.41 | unholy | what is it hvga?vga?wvga? |
17:31.46 | ToAsTcfh | its not out yet |
17:31.47 | makkonen | hvga |
17:31.52 | ToAsTcfh | wvga |
17:31.57 | makkonen | http://www.htc.com/www/product/legend/specification.html |
17:32.07 | ToAsTcfh | oh |
17:32.09 | ToAsTcfh | :P |
17:32.48 | unholy | ah nice thats the new sense from android? |
17:33.11 | ToAsTcfh | im having issues getting it to boot though. seems audio para is different |
17:33.14 | unholy | holy shit 384mb of ram |
17:33.16 | unholy | god damn |
17:34.30 | unholy | hvga meh |
17:35.49 | ToAsTcfh | its been dubbed the hero2 |
17:36.07 | *** join/#htc-linux m3dlg (~m3dlg@212.183.140.36) |
17:37.05 | unholy | oh |
17:37.38 | *** join/#htc-linux CVirus (~Satan@41.130.213.184) |
17:37.54 | ToAsTcfh | the device isnt exciting no |
17:37.59 | ToAsTcfh | its 2.1 though |
17:38.23 | *** join/#htc-linux Zoolooc (~fredsibar@p54953CF0.dip.t-dialin.net) |
17:38.45 | ToAsTcfh | it also has andero200 libs for opengl. i wonder if that is just for certain devices or if thats what opengl 2.0 is |
17:39.29 | ToAsTcfh | i know its opengl for sure though |
17:40.55 | unholy | i see well if its opengl es 2.0 its useless to us |
17:41.14 | ToAsTcfh | why we cant support it? |
17:41.28 | ToAsTcfh | lwp uses it |
17:42.05 | *** part/#htc-linux CVirus (~Satan@41.130.213.184) |
17:42.13 | unholy | but dosent the msm7k the old ones only support opengl 1.0? |
17:42.24 | unholy | or 1.1 |
17:42.26 | ToAsTcfh | idk |
17:42.29 | ToAsTcfh | 1.1 |
17:42.29 | unholy | cant remeber |
17:43.00 | unholy | i though only snapdragon, the iphones cpu and few new msm7k can use openg es 2.0 |
17:43.10 | unholy | gl* |
17:43.38 | ToAsTcfh | idk this is the first msm7k ive seen with the libs for it |
17:44.05 | unholy | hmm will have to wait for phh to decide XD |
17:44.43 | unholy | i have no idea if it or not |
17:47.46 | *** join/#htc-linux DarkMasterHalo (~ssoulard@modemcable187.118-80-70.mc.videotron.ca) |
17:49.22 | phh | ? |
17:49.59 | ToAsTcfh | do we support andero200 |
17:50.27 | ToAsTcfh | anyhow i got a leak of the new htc legend |
17:50.47 | ToAsTcfh | its msm7k and has the new opengl in it |
17:51.02 | ToAsTcfh | but it could be a new chipset though |
17:51.07 | ToAsTcfh | 600mhz |
17:52.02 | phh | yeah... "could be" |
17:52.09 | phh | no seriously |
17:52.10 | phh | it is. |
17:52.18 | phh | their chip supports opengles 2 |
17:52.32 | ToAsTcfh | i cant get it to boot though i guess the audio uis different |
17:53.10 | phh | almost everything is different |
17:53.29 | ToAsTcfh | yeah well its not going backwards is my issue |
17:53.39 | phh | ? |
17:54.00 | ToAsTcfh | i cant use the stuff i have from 2.0 in it. its 2.1 |
17:54.18 | *** join/#htc-linux marex (~marex@vasut.kolej.mff.cuni.cz) |
17:54.21 | phh | ? |
17:54.42 | phh | I still don't understand what you're saying /o\ |
17:54.55 | ToAsTcfh | E/HTC Acoustic( 70): Fail to open /system/etc/AudioPara_COMMON.csv -1. |
17:54.55 | ToAsTcfh | I/HTC Acoustic( 70): open /system/etc/AudioPara4.csv success. |
17:54.55 | ToAsTcfh | I/HTC Acoustic( 70): acoustic table version: Legend_HTC_20100104 |
17:54.55 | ToAsTcfh | E/HTC Acoustic( 70): cannot mmap region |
17:54.55 | ToAsTcfh | E/HTC Acoustic( 70): read audio para from NB file failed -1 |
17:54.56 | ToAsTcfh | E/AudioHardwareMSM72XX( 70): Could not set acoustic parameters to share memory: -1 |
17:55.09 | ToAsTcfh | then when i add my stuff it stays the same |
17:55.18 | phh | "your stuff" ? |
17:55.42 | ToAsTcfh | AudioPara4.csv for the hero |
17:56.03 | *** join/#htc-linux Wout (~wout85@s55927d21.adsl.wanadoo.nl) |
17:56.04 | Captnoord | re |
17:56.21 | Wout | oi |
17:56.28 | Captnoord | yo Wout |
17:56.29 | phh | ToAsTcfh: what you need to change is the libhtc_acoustic |
17:56.36 | ToAsTcfh | i did |
17:56.44 | ToAsTcfh | still no dice |
17:56.46 | phh | and the *exact* same messages ? |
17:57.10 | ToAsTcfh | hold u and ill get it |
17:57.14 | *** join/#htc-linux balsat (~balsat@87.72.13.34) |
17:57.16 | phh | anyway I still don't know what you tried -_-' |
17:58.02 | *** join/#htc-linux M1DLGpc_ (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
18:04.33 | ToAsTcfh | phh: well it actually fixed it. after i push the rest of the cvs file to etc |
18:04.48 | *** join/#htc-linux kiozen (~oeichler@rgnb-5d8789eb.pool.mediaWays.net) |
18:04.48 | ToAsTcfh | guess i didnt do them all at once last night |
18:04.54 | phh | . |
18:05.00 | ToAsTcfh | but then it still crashes |
18:05.12 | phh | seriously, why do you want that crap ? |
18:05.26 | ToAsTcfh | what crap/ |
18:05.33 | ToAsTcfh | 2.1? |
18:05.50 | ToAsTcfh | maybe a better build |
18:05.58 | phh | ?!? |
18:05.59 | phh | 2.1 ? |
18:06.04 | phh | you said it was htc legend |
18:06.06 | *** join/#htc-linux balsat (~balsat@87.72.13.34) |
18:06.09 | ToAsTcfh | it is |
18:06.28 | ToAsTcfh | its 2.1 too |
18:06.31 | phh | ...... |
18:06.41 | phh | android on x86 has 2.1 to |
18:06.44 | ToAsTcfh | what? |
18:06.45 | phh | why don't you try to use this one ? |
18:06.50 | phh | it will work even better. |
18:07.13 | ToAsTcfh | i want an htc build |
18:07.27 | phh | why ? |
18:07.47 | ToAsTcfh | i can build android 2.1 from source its just bare bones though |
18:08.00 | phh | you can copy the missing apps if you want ... |
18:08.51 | ToAsTcfh | not really. i could port htcs frameworks to aosp but thats a lot of work man |
18:09.05 | phh | especially for you. |
18:09.21 | phh | [06:19:12] <MxxCon> hey folks. do you know who did keyboard mapping for rhod phones? <----- adamw I guess |
18:09.32 | adamw | he disappeared |
18:09.36 | phh | ok |
18:11.10 | Wout | a few builds ago my rhod100uk keymap worked perfect, with the latest build the FN keys aren't correct |
18:11.14 | Wout | any idea what changed? |
18:11.16 | phh | ToAsTcfh: legend is msm7k and wvga ? |
18:11.20 | phh | haha, noway it works for you :p |
18:11.57 | phh | Wout: the keymaps just disappeared |
18:12.04 | phh | do you have a working rootfs link ? |
18:12.22 | ToAsTcfh | its the same as the hero |
18:12.51 | phh | ToAsTcfh: ? |
18:12.52 | Wout | Last one i remember working was the one from 22feb |
18:12.57 | phh | ToAsTcfh: same what as what ? |
18:13.00 | phh | Wout: ok |
18:13.17 | Wout | is it difficult to add em back? |
18:13.27 | phh | Wout: wait, there is a 22 feb rootfs ? |
18:13.33 | *** join/#htc-linux droid001 (~g1@p4FDC99CA.dip.t-dialin.net) |
18:13.33 | phh | na, it's difficult to find them back :p |
18:13.44 | Wout | http://xdandroid.southcape.org/rootfs/rootfs-20100222-21d7bc6.zip |
18:13.51 | phh | ?!? |
18:13.57 | phh | it worked in stinebd's rootfs ? |
18:14.06 | Wout | eeeehm |
18:14.13 | Wout | it worked on reefs 22feb cab |
18:14.17 | stinebd | i did nothing! |
18:14.17 | phh | .... |
18:14.19 | Wout | doesnt he use stinebd's rootfs |
18:14.20 | Wout | ? |
18:14.22 | phh | stinebd: I thaught so. |
18:14.25 | phh | Wout: not at that time |
18:14.37 | ToAsTcfh | phh hvga and here http://www.htc.com/www/product/legend/specification.html |
18:14.39 | Wout | ah, ok |
18:14.42 | Wout | then I dont know :P |
18:14.48 | Wout | but it worked around that date |
18:14.52 | phh | ToAsTcfh: you said wvga in the logs ... |
18:14.53 | Wout | and detu, I know :P |
18:14.56 | stinebd | phh: btw, http://xdandroid.southcape.org/initramfs/ |
18:15.00 | ToAsTcfh | eh sorry |
18:15.01 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-25-48-60.client.mchsi.com) |
18:15.02 | ToAsTcfh | :P |
18:15.08 | ToAsTcfh | i was corrected too |
18:15.10 | phh | so they still don't know how to make real screens :p |
18:15.34 | phh | stinebd: still waiting for the system generator now :D |
18:15.37 | ToAsTcfh | well i think this is a cheap device so idk |
18:15.53 | NeoMatrixJR | could someone please point me to a *working* terminal emulator .apk I can download to my PC and add to my SD card? |
18:15.54 | stinebd | phh: hah, i'm gonna need a bigger server for that ;) |
18:16.06 | phh | NeoMatrixJR: connectbot ? |
18:16.35 | NeoMatrixJR | have it...how do u use it to get a local terminal for the phone? |
18:16.46 | phh | connect on "local" protocol -_-' |
18:18.26 | *** join/#htc-linux zachy (~george@85.193.4.18) |
18:18.56 | ToAsTcfh | phh: is that guy still working on the camera or no? |
18:19.12 | phh | don't know |
18:19.19 | ToAsTcfh | that sux |
18:19.26 | ToAsTcfh | and u gave up? |
18:19.31 | NeoMatrixJR | phh: nothing doing. "connection lost" |
18:20.07 | Wout | phh: would it be possible to add the keyboard mappings as seperate files? or do they need to be part of rootfs? |
18:20.18 | phh | NeoMatrixJR: you select local when you chose between ssh, telnet and something else right ? |
18:20.46 | phh | Wout: possible as file, but I can't see how to do that without it being a total mess |
18:20.53 | NeoMatrixJR | phh: never seen that option.... |
18:21.05 | phh | works fine here |
18:21.05 | Wout | ok, then I'll wait for new rootfs |
18:21.17 | NeoMatrixJR | phh: running connectbot v1. is there a newer one? |
18:21.25 | phh | NeoMatrixJR: don't know |
18:23.41 | DarkMasterHalo | hey phh, the url (http://pjottrr.no-ip.org:81/redmine/projects/show/androidphh) is down ? |
18:23.54 | phh | DarkMasterHalo: works fine here |
18:24.21 | DarkMasterHalo | phh: aha, don't tell me there blocking port 81 now.... :( |
18:24.30 | phh | DarkMasterHalo: ok |
18:24.32 | phh | but they are. |
18:25.49 | *** join/#htc-linux Scepterr (~scepterr@ool-18b92277.dyn.optonline.net) |
18:27.09 | *** join/#htc-linux DarkMasterHalo (~ssoulard@modemcable187.118-80-70.mc.videotron.ca) |
18:28.50 | *** join/#htc-linux Ondalf (~ondalf@dsl-roibrasgw1-feb6dc00-127.dhcp.inet.fi) |
18:29.30 | Ondalf | Hello. |
18:31.09 | Ondalf | i've been experimenting with Toshiba Portegé G900 and got Eclair to run, BUT slow. so i come here to ask advice if i begin to either rewrite or add features to g900 device drivers |
18:32.18 | DarkMasterHalo | Mouahaha, browsing your website with Lynx here phh :) |
18:32.25 | phh | my website ? |
18:32.28 | phh | ah the bugtracker. |
18:32.47 | Captnoord | converts buffer->batt_temp = values_16[1] / -6 + 750; |
18:32.48 | Captnoord | to |
18:33.05 | Captnoord | u32( float(values_16[1] / 12.8f ); |
18:33.12 | DarkMasterHalo | Well, I don't know if it is your website but it has androidphh at the end :P |
18:33.21 | Captnoord | roughly |
18:33.45 | phh | Captnoord: same thing. |
18:33.56 | Captnoord | yea sure.... |
18:33.57 | phh | Captnoord: but please note that the previous values aren't for the same battery ... |
18:34.04 | phh | we need a full table with all battery id |
18:34.17 | Captnoord | + 750 |
18:34.18 | Captnoord | :S |
18:34.28 | Captnoord | and my /12.8 is the same |
18:34.44 | Ondalf | one question: how should i begin to write "Fn" button writing on G900? Is Kaiser keyboard driver good source for information, how it should work? |
18:35.01 | Wout | how is remaining battery calculated anyway? through checking voltage or something |
18:35.08 | Wout | ? |
18:35.13 | Captnoord | Wout its a combo |
18:35.26 | Captnoord | its a exponentional function when its fully charged |
18:35.27 | Captnoord | then |
18:35.29 | phh | Ondalf: haha, vogue kaiser and friends code is really ugly, I don't think it would be of any help for such high level things |
18:35.35 | Captnoord | when its under a certain voltage |
18:35.50 | Captnoord | it switches to a almost linear algoritm |
18:35.58 | Ondalf | phh: atleast kaiser got working Fn, dunno if its made with xmodmap though |
18:35.58 | Captnoord | until a certain voltage |
18:36.09 | Captnoord | and then it switches to a log function |
18:36.10 | Captnoord | kinda |
18:36.34 | Wout | and these functions you guys are trying to figure out yourselve? |
18:36.41 | Captnoord | i'm reversing them |
18:37.01 | Captnoord | but floating point math is hard to figure out as the arm chip doesn't have a 'normal' fpu |
18:37.19 | Captnoord | so it needs todo it with ' integer ' math... |
18:37.24 | Captnoord | emulating the float stuff |
18:37.41 | NeoMatrixJR | phh: needed a newer version of connectbot. Mine was SSH only aparently. next question...what editor can I use from a command line in android? nano, vi, etc? (please say something other than vi is available) |
18:37.47 | Wout | ah :/ any idea how real android devices do it without a normal fpu? |
18:38.01 | *** join/#htc-linux Wr4i7h_ (~abc@89.181.5.130) |
18:38.04 | Captnoord | Wout same thing.... |
18:38.12 | Ondalf | vi is awesome. press C to get into edit mode and use ESC to get back from it |
18:38.12 | Captnoord | but even the hero uses the rpc calls |
18:38.19 | Captnoord | even the smem hero thing uses rpc |
18:38.31 | Captnoord | the smem only tells us how its stored |
18:38.51 | *** join/#htc-linux kvaster (~kvaster@live.bn.by) |
18:39.16 | Wout | ah, good luck then |
18:39.38 | Captnoord | lol |
18:39.39 | Captnoord | thanks |
18:39.42 | Captnoord | i'm gonna need it |
18:39.43 | Captnoord | damn complicated |
18:39.58 | Captnoord | yesterday I re'ed a generic signed div function |
18:39.58 | Captnoord | :S |
18:40.04 | Captnoord | was like |
18:40.10 | Captnoord | oO its a normal div |
18:40.32 | Captnoord | lol |
18:40.34 | Captnoord | :S |
18:40.41 | Captnoord | ./home/captnoord/dev/linux-msm/arch/arm/mach-msm/htc_battery_smem.c:610: undefined reference to `__aeabi_ui2f' |
18:40.44 | NeoMatrixJR | Ondalf: I don't have an esc key!!! |
18:40.47 | NeoMatrixJR | :( |
18:40.55 | Ondalf | Neither Kaiser |
18:41.09 | Ondalf | i got kaiser as second phone while i'm playing with g900 |
18:41.44 | Ondalf | and with kaiser you're able to cause ESC code in basic Terminal software that atleast eclair has |
18:42.56 | *** join/#htc-linux Scepterr69 (~scepterr@ool-18b92277.dyn.optonline.net) |
18:44.16 | Captnoord | alright fucked up float shit |
18:44.17 | Captnoord | buffer->batt_temp = ( batt_info_16->batt_temp * 100 ) / 128; |
18:44.23 | Captnoord | woeps |
18:44.27 | Captnoord | small error |
18:44.28 | Captnoord | I see |
18:44.42 | Captnoord | buffer->batt_temp = ( batt_info_16->batt_temp * 100 ) / 1280; |
18:45.58 | Captnoord | [19:33] <phh> Captnoord: but please note that the previous values aren't for the same battery ... |
18:45.58 | Captnoord | [19:33] <phh> we need a full table with all battery id |
18:46.04 | Captnoord | its funny that you say that |
18:46.09 | Captnoord | as battery id is dynamic |
18:46.11 | *** join/#htc-linux Alka (~Alka@189.174.0.118) |
18:46.21 | Captnoord | even if you have the same type of battery |
18:46.24 | Captnoord | those can be different |
18:47.03 | Captnoord | bleh anough coding |
18:47.08 | Captnoord | need to do some DIY again |
18:47.08 | Captnoord | bleh |
18:47.48 | Ondalf | so is that Li-Ion battery's chip inside the pack only for temperature sensoring, not giving any information out from battery except volts and current? |
18:48.10 | Ondalf | so software tells, how much there's power left in battery |
18:48.43 | Ondalf | i just mean that there's no dedicated hardware for ensuring battery is charged and used right |
18:55.51 | *** join/#htc-linux balsat (~balsat@87.72.13.34) |
18:55.59 | NeoMatrixJR | :( does me no good if I can't make { or } or hit [esc] to make changes to a .conf file. |
18:56.49 | phh | Captnoord: battery id might be estimated battery capacity ? |
18:56.52 | NeoMatrixJR | or > |
18:57.03 | *** join/#htc-linux chamonix (chamonix@85-23-17-47-Korvensuora-TR1.suomi.net) |
18:58.11 | phh | NeoMatrixJR: use virtual keyboard |
18:58.39 | Ondalf | and another terminal software |
18:59.09 | phh | Ondalf: why ? |
18:59.24 | phh | connectbot is the best tool i've seen yet as a terminal app |
19:00.58 | *** join/#htc-linux _chamonix (chamonix@85-23-17-47-Korvensuora-TR1.suomi.net) |
19:02.35 | NeoMatrixJR | You guys ROCK! This will really help me get some stuff done! Finally a working console! |
19:02.51 | *** join/#htc-linux _chamonix (chamonix@unaffiliated/chamonix) |
19:03.04 | Ondalf | oh, for ssh. i didn't read that :P |
19:03.56 | _chamonix | hey guys |
19:05.30 | Ondalf | hai _chamonix |
19:05.45 | phh | oh right ... mcdull is also playing this "reporting to ''mainstream'' is useless" thing now ... |
19:08.13 | Alka | NeoMatrixJR: in you virtual keyboard connectbot appear key CTRL? |
19:09.28 | phh | Alka: i think it's mapped to jogball "enter" no ? |
19:09.44 | *** join/#htc-linux [1]Captnoord (~Captnoord@dc5147a47b.adsl.wanadoo.nl) |
19:12.19 | Alka | phh: we have a RHOD tilt2 i can found remaped key for CRTL not enter combination on virtual and physic keyboard, or another hardware key combination |
19:12.36 | phh | yeah no "jogball enter" on tilt2 |
19:12.42 | phh | i have to map a ctrl key somewhere |
19:12.44 | phh | like the 'ok' key |
19:16.43 | AstainHellbring | wow android working very well on my raph800 |
19:17.27 | *** join/#htc-linux kvaster (~kvaster@live.bn.by) |
19:18.14 | Alka | phh: ok thanks |
19:18.50 | *** join/#htc-linux M1DLGpc (~M1DLGpc@bb-87-81-252-83.ukonline.co.uk) |
19:24.52 | AstainHellbring | does a/gps work on raph800? |
19:25.00 | AstainHellbring | trying to guess how googlemaps knew where I was |
19:25.06 | phh | cell tower |
19:25.18 | AstainHellbring | k agps cool |
19:25.25 | phh | that's agps ? |
19:25.27 | phh | hum |
19:25.29 | AstainHellbring | yah |
19:25.32 | phh | for me a is only assisted |
19:25.44 | *** join/#htc-linux GNUtoo (~GNUtoo@host40-149-dynamic.51-79-r.retail.telecomitalia.it) |
19:26.02 | AstainHellbring | or atleast thats what I've come it understand it as |
19:26.11 | AstainHellbring | too many people calling it to many different things |
19:26.31 | Ondalf | my kaiser doesn't know where it is :/ |
19:26.35 | AstainHellbring | phh do you know where rhod400 is at in comparision? |
19:26.47 | stinebd | that's not agps |
19:27.19 | adamw | phh: i couldn't find any way to map a generic ctrl key |
19:27.20 | stinebd | agps is using a list of predefined GPS satellite coordinates to get a faster lock |
19:27.27 | adamw | phh: android doesn't really seem to make it possible |
19:27.30 | Ondalf | ah, assisted GPS |
19:27.31 | phh | haha. |
19:27.33 | adamw | phh: you *can* map specific ctrl+key combos, though |
19:27.41 | adamw | i have ctrl-c mapped to one of my keys =) |
19:27.46 | phh | adamw: ctrl is a too evoluated feature :p |
19:28.30 | adamw | phh: basically the problem is android has no KEYCODE_CTRL or anything |
19:28.36 | adamw | that i can find, anyway. |
19:28.40 | Ondalf | try wikipedia for agps. it says clearly that it uses carrier network dependant system to improve the startup performance of GPS |
19:28.41 | phh | adamw: it's a modifier IGuess |
19:28.58 | adamw | all you can map with kcm files is ascii character codes, and ctrl alone isn't a character. |
19:29.18 | Ondalf | so agps is damn compilcated (after reading that wiki site :D) |
19:29.19 | adamw | so since there's no KEYCODE you can map in the ks file, and no ascii code you can map in the kcm file, i don't see a way to do it... |
19:29.38 | adamw | Ondalf: well, for a start, there's two things that are both acronymified as aGPS :) |
19:29.47 | adamw | ('assisted' and 'aided' GPS, which are different things) |
19:30.30 | adamw | and yeah, it's hilariously complicated...i think there's people on xda and ppcgeeks who know quite a lot about it, it might be best to ask them... |
19:31.05 | adamw | the basic, very inaccurate location fix you get in android currently isn't agps of any sort, because no gps is involved |
19:31.11 | adamw | it's usually referred to as just 'network location' |
19:31.27 | Ondalf | yep, cell tower based location which doesn't work for kaiser for some reason |
19:31.33 | Ondalf | atleast in my case |
19:32.20 | *** join/#htc-linux Sindre (~Sindre@c010ABF51.dhcp.bluecom.no) |
19:33.09 | *** join/#htc-linux Vito_ (~quassel@gw.loccal.net) |
19:37.21 | _chamonix | phh: I redid the battery test but still 14:30 with the kernel 20100228_1834 |
19:37.29 | phh | yes I've read |
19:37.46 | phh | Markinus: you retried and reproduced your test ? |
19:37.47 | _chamonix | well; I thought I'd been mistaken so I did it again |
19:38.18 | phh | ok |
19:39.03 | adamw | Ondalf: location is a setting within android as well, i think, did you check that? |
19:39.14 | adamw | Ondalf: if you don't have location finding enabled in android prefs, google maps won't use it |
19:39.49 | Ondalf | google homepage has it if its set on. google maps search own position if asked from menu |
19:40.06 | Ondalf | both receives "cannot locate you" |
19:40.55 | _chamonix | Ondalf: where can I find the source of the RIL u r using? |
19:41.05 | adamw | Ondalf: huh. |
19:41.39 | Ondalf | _chamonix: RIL? |
19:41.50 | Ondalf | adamw: for some reason it doesn't even try to guess my location |
19:42.56 | *** join/#htc-linux irlolcopter (~irlolcopt@host81-153-254-123.range81-153.btcentralplus.com) |
19:44.19 | stinebd | ugh my builds always end up with a broken calendar |
19:44.24 | stinebd | wish i could figure out why |
19:46.25 | Markinus | phh: whitch test di you mean? Battery? |
19:49.20 | *** join/#htc-linux mcdull (~mcdull@110.4.31.126) |
19:51.32 | phh | Markinus: yup |
19:51.36 | phh | mcdull: what's your "adb enabled" thing ? |
19:52.34 | Markinus | phh: I didn'T made it because the battery was empty yesterday. I will do it today night. Did you maybe test the cat /dbgfs/acpu_dbg/acpu_vdd with the values which should be used? |
19:54.43 | phh | no but I thaught sleep vdd0 was enough |
19:54.50 | *** join/#htc-linux tigerzen (~tigerzen@81-66-204-232.rev.numericable.fr) |
19:55.08 | NeoMatrixJR | what do you guys use to get keycodes in android? showkey doesn't work for me (in connectbot). |
19:55.47 | Alka | NeoMatrixJR: http://www.kandroid.org/android_pdk/keymaps_keyboard_input.html |
19:55.50 | Markinus | phh: yes . .right |
19:57.00 | mcdull | phh, it is not mine. |
19:57.28 | mcdull | and i have no idea of what it is. |
19:57.31 | phh | ... |
19:58.32 | mcdull | phh, it is stated in v1.9 of the glossy build and i will check it out tomorrow. |
19:59.32 | *** join/#htc-linux Liquidsilver (~vadmin@cpc3-nthc6-0-0-cust800.nrth.cable.ntl.com) |
19:59.35 | *** join/#htc-linux bartman (~bart@tau.jukie.net) |
19:59.40 | NeoMatrixJR | Alka: on that page. Tells me how to set up a map, but not how to get keycodes when I press a key so I can MAKE the map.... Unless I'm just missing it..... |
20:00.25 | Ondalf | are you probably looking for xmodmap? |
20:00.35 | Ondalf | that's modifying keymap for X |
20:00.45 | phh | Ondalf: X server on android ? |
20:00.47 | phh | not so sure |
20:00.58 | NeoMatrixJR | ondalf...not xmodmap. more like showkey |
20:01.11 | Ondalf | or w/e you call that thing which puts some graphics to screen |
20:01.17 | Ondalf | i've just used to call it X :P |
20:01.30 | phh | xmodmap is only X ... |
20:01.41 | NeoMatrixJR | showkey -k spits out showkey: KDGKBMODE: Invalid argument |
20:02.25 | adamw | Neo31: you want 'getevents' iirc |
20:02.47 | adamw | wait, just 'getevent' |
20:03.21 | adamw | then when you press a key, you'll get a bunch of output...one of the values (I think the last one in the second line or so) is the hex keycode |
20:03.32 | adamw | grrr |
20:03.36 | adamw | NeoMatrixJR: ^^^ was all for you |
20:04.02 | adamw | the .ks file takes *decimal* keycodes, so you have to convert the value from hex -> dec before putting it in the file. |
20:04.27 | adamw | sigh, i mean kl, not ks. |
20:04.44 | Ondalf | does adam have hint how to start write for kernel that add "Fn" feature for keyboard so i can map more keys, like pictures of layout says |
20:05.06 | adamw | Ondalf: we already have the Fn key mapped for all phones pretty much. you can't get a lot of characters without it. |
20:05.34 | NeoMatrixJR | thanks adamw. I get multiple lines and 3 blocks of digits per key. it might take me a bit to sort that out. |
20:05.49 | Ondalf | adamw: i noted, but for example totally-not-htc-phone like G900 i'm experimenting - its missing. |
20:06.04 | phh | Ondalf: just report a modified |
20:06.16 | phh | modifier* |
20:06.17 | adamw | NeoMatrixJR: like i said I think it's the last one on the second line or something. it's pretty easy to figure out, it's *not* the first line, and the bottom lines all zeros iirc, and you can figure out quite quickly which one it is on the second line |
20:06.35 | adamw | Ondalf: dunno if you're at the kernel or android layer, phh would know more about kernel layert |
20:06.59 | phh | adamw: that makes me think that ctrl must be a kernel side stuff : |
20:06.59 | phh | :( |
20:07.15 | phh | #define KEY_LEFTCTRL 29 |
20:07.15 | phh | ah |
20:07.16 | phh | no. |
20:07.29 | Ondalf | phh: oh i see :) i'll try to look for some help and examples then :) |
20:07.46 | NeoMatrixJR | adam2 so my second line for the 'g' key is 0001 0022 00000000 |
20:07.55 | phh | stinebd: " It has 10GB of space and 300GB of bandwidth." |
20:08.03 | phh | you told him how much you already consumed ? :D |
20:08.03 | Ondalf | phh: Ctrl is mapped at character set and keymap has it. every Ctrl, Alt and AltGr and even Meta1 and 2 are relocateable |
20:08.05 | adamw | NeoMatrixJR: looks like 0022 is it. |
20:08.10 | phh | Ondalf: ah. |
20:08.11 | stinebd | phh: ? |
20:08.19 | phh | stinebd: on "xdandroid"'s thread |
20:08.23 | adamw | phh: huh. where'd you find that? i couldn't find such a code in any of the android docs |
20:08.26 | phh | someone offered his bandwidh |
20:08.38 | phh | adamw: /usr/include/linux/input.h |
20:08.46 | phh | the normal path ? :p |
20:08.46 | NeoMatrixJR | adamw yep...22hex->dec = 34 and that's what's on the map I have...now to get modifying! Thanks!!! |
20:08.54 | adamw | NeoMatrixJR: np |
20:09.10 | adamw | phh: huh. try it and see if it works. maybe i already tried it and it doesn't, heh |
20:09.14 | stinebd | haha |
20:09.22 | phh | adamw: I don't even know how to remap a key -_-' |
20:10.17 | adamw | phh: just edit the tilt2_microp-keypad.kl file in the rootfs and change one of the keys to LEFTCTRL temporarily |
20:10.31 | phh | ah that's enough ? |
20:10.35 | adamw | yeah |
20:10.36 | phh | no rebuild or whatever ? |
20:10.48 | adamw | well you'd have to put the modified file in your rootfs obviously, however you do that |
20:10.57 | adamw | i just mount the rootfs, edit the file and unmount it again... |
20:11.07 | adamw | but that's all it takes, there's no 'compilation' step for the kl file |
20:11.07 | phh | yes |
20:11.13 | stinebd | i don't think that'll work |
20:11.15 | phh | but I thaught the kcm.bin whatever was linked |
20:11.24 | adamw | stinebd: huh? that's how i did it all the time |
20:11.29 | Markinus | NetRipper: Hi, I get Today the 2.6.32 from nexus and did your Leo patches. Works exact es .29 . . . same problems |
20:11.36 | stinebd | adamw: you need an android keycode for ctrl too |
20:11.39 | adamw | phh: the kcm.bin is only needed if you're changing the mappings you get when using fn |
20:11.42 | stinebd | and such a beast doesn't exist |
20:11.46 | adamw | stinebd: yeah, i think so too. i'm not expecting this to work |
20:11.46 | *** part/#htc-linux tigerzen (~tigerzen@81-66-204-232.rev.numericable.fr) |
20:11.49 | adamw | stinebd: see above :) |
20:11.50 | phh | adamw: sounds weird. |
20:11.54 | adamw | phh: it is |
20:12.10 | adamw | i'm sure there's at *least* one more layer than is strictly necessary |
20:12.13 | NetRipper | Markinus, same problems as in? |
20:12.19 | *** join/#htc-linux m3dlg (~m3dlg@212.183.140.7) |
20:12.41 | Markinus | NetRipper: .29 .. I mean the IRQs problems |
20:12.46 | NetRipper | ah ok |
20:12.49 | *** join/#htc-linux Untouchab1e (~Untouchab@82.147.51.146) |
20:12.52 | adamw | phh: it does give you flexibility to do really goofy stuff if you want. you can make what's in the kl file not resemble the actual key layout at *all*, then remap everything in the kcm file. if you really like. |
20:13.05 | NetRipper | that saves me time trying to do .32 myself |
20:13.05 | NetRipper | :) |
20:13.19 | phh | adamw: like to make a usuable keymap ? :p |
20:13.25 | adamw | phh: as stinebd points out, though, the existence of the keycode at the kernel level doesn't mean it'll work in android, as i said earlier, neither of us can find an *android* keycode for control |
20:13.25 | Untouchab1e | #xbox360 |
20:13.28 | Untouchab1e | oobs :) |
20:13.29 | Markinus | NetRipper: yes :) But maybe we should switch to .32 . . . |
20:13.33 | adamw | phh: more to make a usable one in a really baroque way =) |
20:13.33 | NeoMatrixJR | which version of the TP2 is the RHOD210? I'm modifying it's keymap and it has a key marked "grave" between the fn key and the "envelope" key. I have no idea what "grave" is. |
20:13.36 | phh | adamw: let me search. |
20:13.41 | *** part/#htc-linux Untouchab1e (~Untouchab@82.147.51.146) |
20:13.52 | phh | NeoMatrixJR: alt iirc |
20:13.55 | adamw | no, not alt |
20:13.56 | phh | or was it ctrl ? |
20:14.02 | adamw | NeoMatrixJR: look in the .kcm file |
20:14.03 | phh | bah. |
20:14.09 | *** join/#htc-linux Untouchab1e (~Untouchab@82.147.51.146) |
20:14.21 | adamw | NeoMatrixJR: it ultimately gets mapped as 0x3, there |
20:14.25 | adamw | just a sec while i remember what the hell 0x3 is |
20:14.26 | adamw | =) |
20:14.30 | Ondalf | does kaisers keyboard work fully at console? just wondering since i haven't used other than Android in it |
20:15.17 | Ondalf | since i guess kaiser returns keycodes better than my project |
20:15.26 | adamw | NeoMatrixJR: basically, GRAVE is a handy android keycode that isn't used for anything by default, and we map it to whatever we want in the .kcm file |
20:15.52 | adamw | NeoMatrixJR: in my local copy I have it mapped to 0x3 which is ctrl-c, which is just a handy trick so i can do ctrl-c in terminals. =) i can't remember if that mapping's in the version in xdandroid. |
20:16.14 | NeoMatrixJR | adamw: oh, ok. looks like that's the first key I get to remap then. That's actually the envelope key on my board |
20:16.36 | adamw | NeoMatrixJR: what's your model? |
20:16.42 | stinebd | if we get a system autobuild we can add all the keycodes we want ;) |
20:17.20 | adamw | NeoMatrixJR: there's already keymaps for some Euro models in one of the old threads on xda-developers, which no-one's submitted to xdandroid yet |
20:17.33 | NetRipper | Markinus, yes but i'd like to wait for .32 to come out of test |
20:17.45 | NeoMatrixJR | adamw: RHOD400 |
20:18.01 | NetRipper | oh |
20:18.02 | NetRipper | it is? |
20:18.05 | NeoMatrixJR | adamw: RHOD400 = Sprint Touch Pro 2 |
20:18.20 | Markinus | NetRipper: I think yes, this nexusonec |
20:18.42 | Markinus | (there is CDMA support too) |
20:18.56 | NetRipper | there's also android-msm-2.6.32 head |
20:19.00 | NetRipper | without -nexusone at all |
20:19.04 | NeoMatrixJR | adamw: I think RHOD400 is all the CDMA/GSM phones sold in the US by CDMA providers (Verizon, Sprint, US Cellular, etc) |
20:19.14 | Markinus | NetRipper: yes, |
20:19.47 | Markinus | Markinus: I taked the c one, I thought maybe this has a stable state |
20:20.01 | NeoMatrixJR | Markinus: you just spiked my interest with 'CDMA'.... Is someone (other than 95-civic) working on CDMA support? |
20:20.31 | adamw | NeoMatrixJR: hum, how different is that layout from the rhod210? i thought i'd seen one and it was close enough not to worry much about |
20:20.36 | Markinus | NeoMatrixJR: I don't know . . . |
20:20.39 | *** join/#htc-linux unholy (~4c4cc392@gateway/web/freenode/x-cigxllkwfarykwas) |
20:20.58 | adamw | i don't really care a whole lot about the stupid 'browser' 'email' etc key mappings anyway |
20:21.07 | phh | NeoMatrixJR: I could help a bit, but it seems 95-civic wants no help. |
20:21.27 | phh | NeoMatrixJR: anyway, MrPippy has a rhod400, but can't work on the radio part atm |
20:22.13 | NeoMatrixJR | phh: right now I'm getting 'feet wet' with fixing up the keyboard mappings. think I just hit my first roadblock. The up and left keys are sending the same keycode :( |
20:22.26 | phh | NeoMatrixJR: update your kernel. |
20:22.34 | phh | I fixed it two days ago |
20:22.38 | *** part/#htc-linux zachy (~george@85.193.4.18) |
20:23.08 | NeoMatrixJR | phh, yeah, but is that kernel compatable with 95-civic's changes or will it kill CDMA voice? |
20:23.17 | adamw | phh: oh, did the key magically start working after that? I think I left the 'correct' codes in the keymap so it should just start working, no need for an update...right? |
20:23.20 | phh | NeoMatrixJR: no idea. |
20:23.26 | phh | I don't want to take care of closed-source stuff. |
20:23.37 | phh | adamw: yup |
20:23.48 | adamw | phh: cool. |
20:24.02 | *** part/#htc-linux Sindre (~Sindre@c010ABF51.dhcp.bluecom.no) |
20:24.20 | phh | adamw: do you know if our keyboard can handle multiple keypresses at the same time ? |
20:24.25 | NeoMatrixJR | phh...yeah. I think civic would get his code out if he got on more than once a month... :( That was going to be my next thing if I had to was try and implement CDMA on my own if civic didn't get the changes posted |
20:24.44 | NeoMatrixJR | I am such a newb at this... :( |
20:25.00 | adamw | phh: it depends what you mean by 'handle', i guess. holding down shift and pressing a letter key gives me a capital letter. |
20:25.21 | phh | adamw: ha, not me :p |
20:25.27 | adamw | but i'm not sure if that's just because it ignores the held-down shift key, but the initial press had set it to capital 'mode |
20:25.28 | phh | oh it does no |
20:25.35 | phh | +w |
20:25.51 | NeoMatrixJR | switching kernels.... |
20:26.05 | NeoMatrixJR | phh: if I change kernels do I have to wipe my data.img? |
20:26.09 | adamw | no |
20:26.11 | phh | NeoMatrixJR: no |
20:26.17 | phh | NeoMatrixJR: only for major system.sqsh updates |
20:26.46 | phh | adamw: at least it means hardware support it |
20:26.52 | phh | but I'm wondering for other keys actually. |
20:27.09 | NeoMatrixJR | crap...g2g 2 a meeting...back later |
20:27.30 | phh | at 9pm Oo |
20:27.48 | adamw | phh: like I said, i'm not sure if it really 'works', or if it just goes into 'uppercase mode' the moment you hold down the shift key anyway |
20:28.02 | phh | adamw: it stops when you stop pressing on it |
20:28.04 | phh | means it works |
20:28.18 | *** join/#htc-linux tigerzen (~tigerzen@81-66-204-232.rev.numericable.fr) |
20:28.19 | stinebd | phh: what was the fix for wifi freeze on unload with raph100? |
20:28.23 | adamw | hmm, and if you hold it down and type a bunch of characters they're all upper-case |
20:28.25 | adamw | (in winmo anyway) |
20:28.29 | adamw | so yeah, it works in that sense |
20:28.29 | *** part/#htc-linux DarkMasterHalo (~ssoulard@modemcable187.118-80-70.mc.videotron.ca) |
20:28.40 | mcdull | ive got meeting 5 hous later, cant sleep yet. suffering from uri. |
20:28.43 | phh | adamw: I don't start much android these days :/ |
20:28.55 | phh | stinebd: reverse a patch in the wifi driver |
20:28.56 | adamw | phh: i will once you get sound working =) |
20:28.59 | phh | I think glemsom added a comment somewhere |
20:29.03 | phh | adamw: or bluetooth. |
20:29.06 | phh | quite the same thing here :p |
20:29.07 | stinebd | phh: in kernel? |
20:29.09 | adamw | ah |
20:29.17 | phh | stinebd: no, wifi driver, it's another package |
20:29.21 | adamw | would be nice to have bt too actually, thinking about it |
20:29.23 | stinebd | ok |
20:29.28 | adamw | i got a bt headset the other day, it's kinda nice |
20:29.29 | phh | stinebd: we reversed a patch that ti's guy marked as "DO NOT MERGE" :p |
20:29.35 | stinebd | oh |
20:29.41 | stinebd | damn |
20:29.44 | stinebd | i need to find that then |
20:29.49 | phh | adamw: I think BT won't be easy. |
20:29.54 | phh | adamw: but it's not really up to me now |
20:29.55 | adamw | phh: what winmo do you run, out of interest? |
20:29.57 | phh | the kernel is ready. |
20:30.04 | adamw | ah k, it's all userspace now? |
20:30.06 | phh | adamw: the thingy there |
20:30.10 | phh | energyrom |
20:30.12 | adamw | i thought some phones already had bt though? |
20:30.23 | adamw | phh: ah yeah, me too. it's kinda too good. sets the bar too high for android =) |
20:30.25 | phh | all phones supported that is not rhod are. |
20:30.38 | adamw | so...why is it hard to do the userspace stuff for rhod in particular? |
20:30.38 | stinebd | heh |
20:30.42 | phh | ok, now I'm reading again my sentence, and I can't see the beginning. |
20:30.43 | stinebd | rhod has that fancy bcm chipset |
20:30.49 | phh | adamw: everyone has the same BT chipset |
20:30.50 | phh | but us |
20:30.52 | adamw | ah |
20:31.02 | phh | stinebd: it seems the power consumption is really way better than TI |
20:31.02 | adamw | i thought you said it had a kinda standard interface once the kernel stuff was done though |
20:31.03 | adamw | no? |
20:31.05 | phh | for both BT and wifi |
20:31.11 | stinebd | phh: yes, it's a very nice chipset |
20:31.15 | phh | adamw: haha not at all. |
20:31.18 | stinebd | optional 802.11n too |
20:31.18 | adamw | d'oh. |
20:31.21 | phh | stinebd: na |
20:31.28 | adamw | stinebd: no, only the 4329 does n |
20:31.29 | phh | stinebd: it's 4329, we have 4325 |
20:31.32 | adamw | all 4325 variants are g |
20:31.33 | phh | 4329 also has FM TX |
20:31.41 | stinebd | that's why i said optional ;) |
20:31.46 | phh | right. |
20:31.51 | phh | stinebd: it's still damn good |
20:31.51 | Alka | bcm chipset can be done monitor mode? |
20:32.04 | phh | Alka: most likely |
20:32.09 | phh | as all wifi chips nowadays. |
20:32.35 | adamw | phh: so we'd basically have to rip the userspace stuff out of an n1 rom or something? |
20:32.48 | phh | adamw: not sure |
20:32.51 | phh | we might have the needed sources |
20:33.07 | phh | and if we have, it's on my hard drive. |
20:33.09 | phh | somewhere in 1TB. |
20:33.15 | adamw | and when i say 'we' i am using the well-worn definition 'anyone but me' |
20:33.18 | adamw | hehe |
20:33.25 | phh | :) |
20:33.35 | _chamonix | phh: is there something else I shall set and retest or do we wait for Markinus to confirm? |
20:33.48 | phh | _chamonix: not that I can think of |
20:33.54 | _chamonix | k |
20:34.11 | _chamonix | I'll update to current system+rootfs then |
20:34.12 | stinebd | the only bad part about broadcom chipsets is they don't like to share source for drivers |
20:34.23 | stinebd | and they don't like to share binaries either unless you're a client |
20:34.27 | Alka | phh: bcm too suuport inject packets? |
20:34.29 | phh | stinebd: we have wifi sources |
20:34.34 | adamw | stinebd: i see you have taken the 'understatement ninja' course |
20:34.38 | phh | Alka: as most wifi chips ... :p |
20:34.52 | phh | stinebd: anyway, if we have BT daemon binary (and we have, and it seems to work.) |
20:34.59 | phh | and we have sources of the android glue |
20:35.03 | phh | it's fine. |
20:35.21 | phh | well, not totally, but I would be able to live with it |
20:35.39 | Alka | wtf TP2 like wep crk weapon |
20:35.56 | Markinus | _chamonix: one test is to compare the VDDs with cat /dbgfs/acpu_dbg/acpu_vdd with this table whitch shoulb be used .. |
20:35.59 | phh | Alka: you'd already be able to do so on any wifi phone you know :p |
20:36.15 | _chamonix | Ondalf: what I was asking before is for the radio lib u r using... we have had an issue with cell location and found a fix for it... that's y asked for the sources because we could compare |
20:36.41 | phh | _chamonix: didn't the actual fix come from kaiser's guy ? |
20:36.45 | phh | ah no |
20:36.50 | _chamonix | nope |
20:37.04 | _chamonix | it was a fix on some G1 source |
20:37.10 | Alka | phh: just tried on wrt5gl sucess, but not on phone great news |
20:37.22 | stinebd | ah found the wifi thing |
20:37.24 | stinebd | http://android.git.kernel.org/?p=platform/system/wlan/ti.git;a=commitdiff;h=849c6d4186a7fcd4d25bcff6cc2e6bc25f8c4696 |
20:37.24 | phh | Alka: I never said it will be easy :p |
20:37.31 | phh | stinebd: that's TI not BT -_-' |
20:37.34 | Ondalf | _chamonix: i'm just lazy-ass and using packets got from xda, so dunno what they've done. running NAND bootable Eclair with radio it recommends |
20:37.38 | _chamonix | Markinus: with what reference should I compare? |
20:37.45 | stinebd | phh: i was looking for the freeze on unload fix, remember? |
20:37.52 | phh | stinebd: ah. |
20:37.58 | phh | I thaught you meant about BCM sources. |
20:38.10 | stinebd | i don't have bcm, therefore i don't care about it ;) |
20:38.18 | phh | Alka: it's just technically possible :p |
20:38.29 | _chamonix | Ondalf: I'm not talking of radio modules of the phone but the android radio lib... if there is a repo for the distro u use there will be sources |
20:38.47 | Markinus | _chamonix: whtich device do you have? |
20:38.52 | _chamonix | raph |
20:38.57 | Ondalf | nope, there isn't afaik. atleast i dunno about them. |
20:39.06 | _chamonix | that's bad |
20:39.09 | phh | _chamonix: I think they are on sourceforge |
20:39.11 | phh | somewhere |
20:39.14 | _chamonix | lol |
20:39.34 | phh | http://androidhtc.git.sourceforge.net/git/gitweb.cgi?p=androidhtc/ril.git;a=summary |
20:39.34 | phh | there |
20:39.39 | _chamonix | I checked the vogue packet yesterday but didn't find the ril sources |
20:39.54 | _chamonix | cool, ty |
20:40.01 | Ondalf | also, _chamonix, if you wan't, you can use your native lang (based your host) if you want ask something, and if you need to tell, how things are, since i'm sometimes "bit" out :P |
20:40.06 | phh | FIY our fork started ~ november |
20:40.15 | phh | so don't need to look at ooooolllllllddd patches |
20:40.38 | _chamonix | Ondalf: what native lang should I use? french, swedish or german? |
20:40.42 | _chamonix | :P |
20:41.26 | Markinus | _chamonix: the you should get: 0,0,0,3,4,5,5,6 |
20:41.48 | _chamonix | k, ty Markinus... I'll finish updating and have a look |
20:42.10 | Ondalf | _chamonix: as i said. my guess was based to your host, so don't blame me :) also neither of those won't do any good for me |
20:42.22 | Markinus | phh: there is a small bug, we have no 9 VRegs and this isn'T changed for the VDD patch .. we didn'T see the last one |
20:42.37 | Markinus | s/no/now |
20:42.38 | stinebd | maybe i should `git log | grep "do not merge"` in the aosp tree |
20:43.18 | MrPippy | i looked into the bcm bt, doesn't look like it'll be too hard |
20:43.46 | *** join/#htc-linux mickey|zzZZzz (~mickey@80.81.242.146) |
20:44.17 | *** join/#htc-linux bartman (~bart@tau.jukie.net) |
20:45.01 | MrPippy | replace the hciattach service (in init.rc) with a brcm utility (source is in system/bluetooth/brcm_patchram_plus) which does something with those hcd files and then runs hciattach |
20:46.27 | Markinus | phh: corrected, commited |
20:48.25 | _chamonix | phh: as far as I can see the loc is unfixed in that code as all formats are %d |
20:50.51 | phh | MrPippy: really ? |
20:50.51 | phh | hum |
20:51.02 | phh | MrPippy: that's not what I've seen |
20:51.08 | phh | MrPippy: and hciattach with which hci driver ? |
20:51.13 | phh | generic doesn't work |
20:51.22 | phh | _chamonix: if you find a fix link, tell them |
20:51.40 | *** join/#htc-linux [acl] (~abel@96.246.167.90) |
20:52.01 | _chamonix | lol, I can pass on your commit |
20:52.47 | MrPippy | brcm_patchram_plus runs hciattach itself, take a look at the bottom of http://github.com/cyanogen/android_vendor_google_passion/blob/2cca7c03f12d4f0a6535b47579e49eeb668c0b06/init.mahimahi.rc |
20:53.30 | MrPippy | err maybe it doesn't, i don't know how it works then |
20:53.53 | phh | MrPippy: oh brcmblabla is a BT daemon itself ? |
20:53.54 | phh | damned |
20:54.08 | phh | with the name of the app I wouldn't have thaught so |
20:54.13 | phh | maybe it's even bluez compatible -_-' |
20:54.41 | phh | ok it's not |
20:54.52 | phh | so we would need some framework changes |
20:54.55 | phh | or |
20:54.58 | phh | aaahhhhhhh |
20:55.00 | phh | stupid me. |
20:55.09 | adamw | um, once you have an hci interface, you've basically won, haven't you? |
20:55.11 | phh | MrPippy: trying it as is is worth the try :p |
20:55.16 | adamw | that's what the higher level stuff all uses i thought |
20:55.21 | phh | adamw: that's what I was thinking -_-' |
20:55.25 | phh | I totally forgot that |
20:55.30 | phh | I thaught only hciattach was compatible with bluez ... |
20:55.32 | phh | don't know why |
20:55.38 | MrPippy | wow i dont know, brcm_patchram goes into an infinite loop after it enables hci, but its too simple to really do much |
20:55.48 | phh | MrPippy: infinite loop without burning CPU ? |
20:55.49 | *** join/#htc-linux balans (~BRPOLDB@82-170-215-5.ip.telfort.nl) |
20:55.57 | phh | and don't worry |
20:56.00 | phh | bluetooth is damn easy |
20:56.10 | MrPippy | yeah while(1) sleep(UINT_MAX), very weird |
20:56.18 | phh | no select ?!? |
20:56.29 | phh | well |
20:56.30 | phh | why not |
20:56.35 | phh | i'm not totally sure of how this thing works |
20:57.08 | MrPippy | BOARD_HAVE_BLUETOOTH_BCM is the def used in android source |
20:57.22 | phh | and it's used for anything ? |
20:57.55 | MrPippy | there is one odd patch in bluez/common, something about setting BT to high priority |
20:58.10 | _chamonix | phh: in the vogue android tread I scanned a few users have noticed cell loc not working but it seems noone gives a damn as I couldn't find a response |
20:58.41 | phh | MrPippy: that's all ? |
20:58.44 | phh | no framework change ? |
20:58.46 | phh | \o/ |
20:59.51 | MrPippy | nothing that i can see, the framework just starts hciattach i think and then tries to open a BT socket |
20:59.58 | phh | cool |
21:00.12 | phh | but |
21:00.16 | phh | FM won't work :( |
21:01.06 | MrPippy | i remember seeing an android interface on one of the new htc phones (desire or legend) for fm radio |
21:01.14 | MrPippy | wonder how they did that |
21:01.25 | phh | mmmmm |
21:01.34 | phh | don't know if android apps can talk HCI directly |
21:01.41 | adamw | couldn't give a shit about FM, tbh |
21:01.45 | adamw | =) |
21:01.46 | phh | adamw: pffff |
21:01.59 | phh | cr2 wants gps with rds :p |
21:02.22 | phh | MrPippy: N1 guys got FM working with the desire fm app ? |
21:03.14 | MrPippy | i don't think so |
21:03.20 | phh | oh well, maybe N1 guys are as good as hero guys. |
21:03.22 | phh | isn't it ToAsTcfh ? |
21:04.45 | MrPippy | anyone know where the desire rom is (like a download link) |
21:04.46 | *** join/#htc-linux cr2_ (~cr2@ip-109-84-18-184.web.vodafone.de) |
21:05.11 | phh | MrPippy: on xda ? :D |
21:06.09 | [acl] | the stock rom ? or the hack they released for the nexus one? |
21:06.44 | phh | MrPippy: concerning baudrate, use 4Mbps, it's the only one that has been tested correctly for ttyHS0 |
21:06.45 | phh | or 115200. |
21:07.09 | MrPippy | i guess the stock one, so we can see the fm radio stuff |
21:07.21 | MrPippy | phh: where is that from? |
21:07.29 | phh | MrPippy: where is what from ? |
21:07.32 | phh | oh it's ttyHS1 |
21:07.38 | phh | not 0. |
21:07.43 | *** part/#htc-linux MrPippy (~pip@adsl-75-11-160-192.dsl.sndg02.sbcglobal.net) |
21:07.49 | *** join/#htc-linux k_linux (~klinux@41.140.211.144) |
21:07.54 | *** join/#htc-linux MrPippy (~pip@adsl-75-11-160-192.dsl.sndg02.sbcglobal.net) |
21:08.09 | phh | MrPippy: ? |
21:08.29 | MrPippy | yeah |
21:08.33 | _chamonix | Markinus: cat /dbgfs/acpu_dbg/acpu_vdd -> 0,0,0,3,4,5,5,6 as expected |
21:08.40 | [acl] | MrPippy: No clue where that stock one is. But this is the one for the nexus one and it has the FM as well . |
21:08.49 | [acl] | MrPippy: http://android.modaco.com/content/google-nexus-one-nexusone-modaco-com/303009/02-mar-alpha-11-modaco-custom-rom-with-htc-sense-desire-rom-now-with-online-kitchen/ |
21:09.54 | phh | MrPippy: hum, I think lpm isn't built in the kernel, it needs bluetooth "uart_ll" type |
21:10.46 | *** join/#htc-linux dcordes (~dccordes@unaffiliated/dcordes) |
21:11.24 | MrPippy | what is lpm |
21:11.36 | phh | low power mode |
21:11.43 | cr2_ | MarcLandis: my iceweasel doesn't want to show wiki pages for some reason |
21:11.53 | phh | cr2_: lynx ? :p |
21:12.06 | cr2_ | phh: w3m |
21:12.14 | phh | :) |
21:12.39 | phh | MrPippy: don't expect N1's brcm_blabla binary to export for us btw. (I just tried just in case :D) |
21:13.04 | Markinus | _chamonix: very good :) |
21:13.17 | phh | Markinus: no, it means it's correct |
21:13.27 | phh | and he still doesn't get the battery improvement |
21:13.50 | MrPippy | export? you tried running it? |
21:13.52 | Markinus | phh: yes, but we see that the correct table is used . . |
21:14.12 | phh | MrPippy: ouch, s/export/work/ |
21:14.18 | phh | don't know why I said export ... |
21:14.19 | cr2_ | phh: nexus/leo has completely different battery monitor support |
21:14.20 | phh | and yes I tried |
21:14.35 | phh | cr2_: 0x30100001 rpc ? |
21:14.56 | dcordes | hi |
21:15.08 | MrPippy | ok, still seems like some piece of this is missing...patchram just uploads the hcd file, but i don't know where hciattach gets called |
21:15.25 | phh | MrPippy: nowhere |
21:15.30 | phh | there is no need for hciattach |
21:15.34 | phh | this tool does hciattach's job |
21:15.44 | cr2_ | phh: no, i2c chip |
21:15.51 | phh | cr2_: ah yes right |
21:15.54 | phh | like kaiser |
21:15.54 | cr2_ | dcordes: got a leo ? |
21:16.08 | cr2_ | phh: like, but not exactly the same |
21:16.18 | phh | cr2_: datasheet available anyway |
21:16.18 | dcordes | cr2_, I am experiencing the simplicity of text auto correction |
21:16.29 | cr2_ | dcordes: lol |
21:16.38 | cr2_ | phh: yes |
21:16.54 | phh | MrPippy: groumpf I can't find any msm7k build for brcm_patchram_plus... I'll have fun doing that. |
21:17.05 | MrPippy | ohh its built for armv7? |
21:17.22 | phh | hum don't know, but it's for QSD. |
21:17.25 | dcordes | cr2_, now it asks to enter a gmail address. I thought this was windows mobile :D |
21:17.30 | phh | I still don't know the name of the arm procs :p |
21:17.44 | _chamonix | Markinus: 0,0,0,3,4,5,5,6,7 with last commit |
21:17.51 | cr2_ | dcordes: hehe. big brother is watching you |
21:18.09 | *** join/#htc-linux JuNu_KN (~chatzilla@kons-5f710c2a.pool.mediaWays.net) |
21:18.24 | Markinus | _chamonix: ok, thx! Now it's a complete output |
21:18.53 | MrPippy | i just commented out the ifeq BOARD_BRCM_BT in the Android.mk and built it |
21:18.56 | Markinus | _chamonix: wit echo > you can change them . . . |
21:19.04 | phh | MrPippy: ah. |
21:19.06 | _chamonix | k, what should I be looking for in dmesg to sort out btwn expected and non expected bahaviour |
21:19.08 | phh | MrPippy: that might work too. |
21:19.17 | dcordes | cr2_, something seems wrong without the hw keyboard |
21:19.24 | MrPippy | luckily it has almost no dependencies |
21:19.39 | phh | MrPippy: mind sharing the binary ? |
21:20.05 | Markinus | cr2_: I patched today the .32 fro nexus with the Leo patches and there are the IRQ problems too |
21:20.10 | _chamonix | Markinus: can u redirect me to some place where I can understand the semantics of that table in order to be able to make the right choices |
21:20.17 | MrPippy | yeah http://opus.homelinux.com/public_files/brcm_patchram_plus |
21:20.21 | phh | thanks |
21:20.38 | dcordes | cr2_, already have plans for a funny usb keyboard based docking station |
21:20.44 | dcordes | cr2_, with powered hub included :) |
21:20.58 | *** join/#htc-linux randomblame (~randombla@c-71-59-184-96.hsd1.wa.comcast.net) |
21:21.02 | Markinus | _chamonix: the once place is the acpuclock.c |
21:21.03 | cr2_ | dcordes: hm. for running uboot ? |
21:21.27 | dcordes | cr2_, no, for the times when linux works well with ehci hcd and all the fun |
21:21.41 | Markinus | _chamonix: there is this comment: |
21:21.41 | Markinus | MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V |
21:22.00 | phh | Markinus: you trust HTC's comments ? :p |
21:22.13 | Markinus | phh: Ha! :) |
21:22.29 | Markinus | phh: I think we have nothing other .. |
21:22.57 | phh | yeah :/ |
21:22.57 | *** join/#htc-linux Vito_ (~quassel@gw.loccal.net) |
21:23.07 | phh | Markinus: you can try to overclock to the stability limit |
21:23.08 | dcordes | cr2_, 'Google Ort' ?! |
21:23.09 | phh | and see what happens |
21:24.11 | cr2_ | Markinus: plot the id vs. voltage |
21:24.14 | Markinus | phh: this could be a test, step lower and performance test . .see if it crash or not . . |
21:24.28 | *** join/#htc-linux tigerzen (~tigerzen@81-66-204-232.rev.numericable.fr) |
21:24.34 | cr2_ | Markinus: looks like linear regression |
21:24.37 | Markinus | cr2_: But how can you dump the voltage? |
21:24.51 | cr2_ | Markinus: in the google code table |
21:25.27 | *** join/#htc-linux m3dlg (~m3dlg@bb-87-81-252-83.ukonline.co.uk) |
21:27.00 | MrPippy | btw i tried plugging a headset into my diam, the button works (play/pause/skip in music player) but no sound |
21:27.04 | Markinus | cr2_: thwere can I find this table? |
21:27.09 | Markinus | where |
21:27.26 | phh | MrPippy: you must force the userland to do a snd_set_device |
21:27.29 | phh | it will route the sound to headset |
21:27.35 | phh | start a call for example |
21:27.44 | dcordes | leo display quality is stunning! |
21:28.55 | MrPippy | how about for the 3.5mm adapter? |
21:29.03 | phh | MrPippy: don't know, don't have :p |
21:29.17 | Markinus | cr2_: we have a table for the scorpio n n . nice directly in voltages |
21:29.26 | Captnoord | [19:56] <phh> Captnoord: battery id might be estimated battery capacity ? |
21:29.41 | Captnoord | batt_id = ( (GET_BATT_ID * ( 2592 | 8 ) ) / 0x1000 ); |
21:29.55 | Captnoord | #define GET_BATT_ID *(u32 *)(MSM_SHARED_RAM_BASE + 0xFC0DC) |
21:29.58 | phh | cr2_: rhod's BT uart is uart2dm as usual ? |
21:30.14 | phh | Captnoord: meaning ? |
21:30.21 | Captnoord | I don't have a freaking clue |
21:30.26 | Captnoord | but thats the asm translated to c |
21:30.29 | phh | lol ok |
21:30.36 | Captnoord | I think |
21:30.52 | Captnoord | that its a measured resistance |
21:30.55 | MrPippy | the driver translates batt_id to the mAh of the battery |
21:31.06 | Captnoord | that needs to be corrected somehow |
21:31.11 | MrPippy | one path went to 1340 (std diam battery) and the other was the extended |
21:31.20 | Captnoord | MrPippy: hehe nope.... |
21:31.23 | Captnoord | got that part to |
21:31.33 | Captnoord | if ( batt_id == 0x320 ) |
21:31.33 | Captnoord | { |
21:31.33 | Captnoord | vendor_id = 0xFF; |
21:31.33 | Captnoord | } |
21:31.33 | Captnoord | else if ( batt_id == 0x118 ) |
21:31.34 | Captnoord | { |
21:31.34 | Captnoord | vendor_id = 1; |
21:31.35 | Captnoord | } |
21:31.35 | Captnoord | else |
21:31.36 | Captnoord | { |
21:31.36 | Captnoord | thats the vendor part |
21:31.41 | phh | I love disassembling. |
21:31.43 | phh | it's like art |
21:31.48 | phh | it's all a matter of interpretation |
21:31.52 | [acl] | nice !! |
21:32.00 | Captnoord | battery.capacity, set by battery driver. if ( batt_vendor != 1 ) capacity = 1340 else capacity = 1800 |
21:32.02 | Captnoord | MrPippy: bleh |
21:32.08 | Captnoord | your pseudo correct |
21:32.14 | phh | lol |
21:32.35 | NeoMatrixJR | adamw: maybe you can riddle me this one... the rhod210 keymap my phone is using now does not have a key 114/115 in the .kl (volume keys) yet android knows what they are and what to do with them. Is there some sort of default settings for unlisted keys? |
21:33.06 | adamw | NeoMatrixJR: there's a different kl file |
21:33.06 | phh | NeoMatrixJR: because it's not handled in microp_ksc, but in gpio keys or something like that |
21:33.11 | phh | and the default is qwerty.kl |
21:33.25 | Captnoord | [22:31] <Captnoord> vendor_id = 0xFF; |
21:33.30 | Captnoord | that is debug board btw |
21:33.35 | adamw | tilt2_navi_pad.kl |
21:33.40 | Captnoord | I think |
21:33.55 | adamw | (it uses the same file as the tilt2 layout, because the hardware buttons are identical on all rhods, no need for separate files) |
21:34.58 | MrPippy | phh: any idea why snd_set_device doesn't get called automatically when headset is plugged in? |
21:35.12 | Captnoord | maybe its because the irq isn't handled |
21:35.12 | Captnoord | or |
21:35.16 | Captnoord | the event isn't linked |
21:35.21 | phh | MrPippy: because it's not coded so |
21:35.28 | phh | I have no real reason why it is |
21:35.31 | *** join/#htc-linux FuZi0n (~FuZi0n@84-104-50-248.cable.quicknet.nl) |
21:35.44 | MrPippy | that also reminds me, there was that problem with mic_bias where it needed a phone call to turn on |
21:35.57 | phh | Captnoord: irq is handled |
21:36.00 | Captnoord | k |
21:36.09 | MrPippy | mic bias on cdma is hardcoded on because of that |
21:36.36 | Captnoord | damn DIY in my new appartment is crap... steaming off the wallpaper 3 layers thick.... and the lowest layer is like 30 years old..... |
21:36.41 | Captnoord | it smells like its 200 years old |
21:36.42 | Captnoord | damn |
21:37.07 | Captnoord | the guy who lived there before us... left 2 years ago.... |
21:37.12 | Captnoord | no where to be found |
21:37.17 | NeoMatrixJR | adamw: the base layout is nearly the same except a few keys, but the FN btns are different which I will map next. Wanted to make sure my .kl was ready first. |
21:37.26 | stinebd | he probably buried himself in the walls somewhere |
21:37.28 | *** join/#htc-linux Vito_ (~quassel@gw.loccal.net) |
21:37.48 | Captnoord | stinebd: hehe I hope..... |
21:38.02 | [acl] | Captnoord: Wear a mask man. You have no idea how much Lead or other crap is in there. At least here in nyc we have that issue |
21:38.05 | Captnoord | the style of wallpaper he has... makes me wonder if he was retarted somehow |
21:38.33 | Captnoord | [acl]: nah in holland it isn't the case.... |
21:38.38 | Captnoord | but you have a point |
21:39.13 | randomblame | where was the old 2.6.27 branch repo'd |
21:39.14 | phh | Captnoord: just the dust even if it's not toxic, it's not great to breath that. |
21:39.19 | phh | randomblame: linuxtogo |
21:39.39 | randomblame | thanks, I have a feeling the eve drivers will actually get along with that branch |
21:39.44 | Ondalf | uh oh... any hint how to rotate console 90 degrees to some way? |
21:39.52 | NeoMatrixJR | adamw: any way to tell if a key is handled by gpio? I want to see if I need to add the mic mute button from the back of the phone to my .kl but I can't tell if it currently does anything. |
21:40.03 | Ondalf | using phone with head tilted kills my neck :P |
21:40.05 | adamw | i think it's mapped to home right now |
21:40.11 | Captnoord | and besides the only time i'm wearing a mask would be when i'm gonna hide the fucked up boiler lines into the wall..... |
21:40.20 | adamw | NeoMatrixJR: anyway, yes, look at the event node that's reported by getevent |
21:40.30 | phh | adamw: not home button here |
21:40.34 | adamw | NeoMatrixJR: the keyboard and gpio use different nodes, one's event1 and one's event3 or something |
21:40.39 | *** join/#htc-linux tehtrk (~tehtrk@rrcs-24-173-220-30.sw.biz.rr.com) |
21:40.50 | phh | NeoMatrixJR: and there is gpio and matrix gpio. |
21:40.51 | adamw | you can tell just by pressing keys that you know are on one or the other, and comparing the output |
21:40.53 | phh | power button is gpio |
21:40.57 | phh | bottom keys are matrix gpio iirc |
21:41.38 | *** join/#htc-linux bartman (~bart@tau.jukie.net) |
21:41.47 | Captnoord | phh qemu works great with ida and nk.exe |
21:42.00 | NeoMatrixJR | mapped to the same event as the keyboard. Key 102 |
21:42.00 | Captnoord | only need to get myself a newer vm for the arm working |
21:42.03 | Captnoord | as it crashes sometimes |
21:42.24 | stinebd | phh: oh i meant to ask you, i saw the rhod ptt commit in the kernel - are all those face/side buttons handled by microp-keypad on rhod? |
21:42.26 | adamw | Neo31: so you put it in the keyboard .kl file, then |
21:43.07 | adamw | stinebd: the navipad has home, end call, volume up and volume down |
21:43.08 | phh | stinebd: don't know |
21:43.15 | adamw | stinebd: everything else is keypad afaict |
21:43.29 | stinebd | adamw: ah okay |
21:43.35 | stinebd | weird |
21:43.44 | adamw | yeah it is |
21:43.45 | phh | stinebd: I think so too. |
21:43.48 | phh | but hey htc :p |
21:43.50 | adamw | can't see any particular reason for that approach |
21:43.52 | MrPippy | Captnoord: you can run nk.exe in qemu and hook up ida to it? |
21:44.08 | adamw | maybe they're just reusing some bizarre interface component or something, who knows |
21:44.16 | Captnoord | nah you can debug / emulate the stuff of nk.exe using ida's gdb debugger and qemu hooked up |
21:44.17 | Captnoord | but |
21:44.20 | Captnoord | getting it to work |
21:44.24 | Captnoord | is very complicated |
21:44.35 | Captnoord | when I got everything working |
21:44.38 | phh | Captnoord: we can really do that ?!? |
21:44.40 | Captnoord | i'll write a tutorial for it |
21:44.45 | Captnoord | yup we can |
21:44.46 | Captnoord | :D |
21:44.46 | phh | we need that. |
21:44.57 | phh | then breakpoint on rpc calls |
21:45.06 | Captnoord | its very usefull to debug functions from which we don't have a clue they do |
21:45.21 | Captnoord | I think its even possible to hook it up so it debugs the windows mobile kernel |
21:45.22 | phh | oh we can't connect to phone's nk ? |
21:45.28 | Captnoord | I think we can |
21:45.31 | Captnoord | I haven't checked yet |
21:45.39 | Captnoord | would be awsome |
21:45.49 | phh | totally |
21:45.58 | Captnoord | qemu is a emulator.... |
21:46.08 | Captnoord | all I need todo is get a complete memory dump |
21:46.18 | Captnoord | and load it together with qemu |
21:46.27 | Captnoord | but regarding hooking up to the phone |
21:46.31 | Captnoord | haven't tried that yet |
21:47.09 | Captnoord | gonna set it up so I can build my own windows / arm version |
21:47.11 | Captnoord | bleh |
21:47.20 | Captnoord | so much fun things todo |
21:47.22 | Captnoord | so little time |
21:49.46 | [acl] | Anyone report issues with the bcm driver ? and android not being able to launch? i'm having a horrible time after the wifi update for the rhod. |
21:51.11 | [acl] | it seems to happen when the rootfs image detects my phone to be cdma. Which it is, but if i disable that my original system.sqsh runs fine. Re-enable it and boom no android. |
21:51.39 | MrPippy | you have rhod400? |
21:51.54 | [acl] | yup.. sprint |
21:52.32 | _chamonix | well, I guess I shall recompile with PERF_SWITCH_DEBUG and PERF_SWITCH_STEP_DEBUG on to be able to understand what is going on... |
21:52.35 | phh | [acl]: the detection doesn't do anything |
21:52.47 | phh | it just says which phone you have with the address of wifi firmware |
21:52.59 | MrPippy | thats around the time we pull the wifi calibration |
21:53.37 | [acl] | phh: True, but when right now the only way i can boot is to modify the init script and manually force it to be gsm and not load the bcm |
21:53.54 | phh | [acl]: and it works ?!? |
21:54.37 | [acl] | yeap. But with my old system.sqsh. I mean its modified and i wanted to keep it. |
21:54.50 | phh | what's the ... |
21:54.56 | NeoMatrixJR | phh: thanks for the tip on the update to the kernel. I dropped the updated kernel and modules into 95-civic's build and surprisingly it didn't kill CDMA...I'm going to have to track that down later :) |
21:54.57 | phh | [acl]: which message do you get else ? |
21:54.59 | MrPippy | and you have a recent kernel? |
21:55.12 | [acl] | latest kernel and rootfs |
21:55.24 | [acl] | but im trying to keep my old system.sqsh since i spend time modifying it. |
21:55.46 | [acl] | worse case i can redo my changes on the latest xandroid but i was wondering why it was happening. I was baffled for a while |
21:56.10 | NeoMatrixJR | adamw: you said 0x3 is Ctrl-c...how did you find that one out? Do you know what Ctrl-v, Ctrl-x, and [tab] would be? I'm thinking I might throw these in my mapping. |
21:56.33 | phh | [acl]: without the messages we can't help ... |
21:57.00 | [acl] | i dont get an error, but when init.android starts. it just loops. Sorry all i got for now. |
21:57.05 | *** join/#htc-linux originaloeb (oeb@dtmf.org) |
21:57.22 | [acl] | no boot anim .. just loops |
21:57.55 | adamw | NeoMatrixJR: i've tried, android doesn't respect the cut/paste shortcuts |
21:58.09 | adamw | NeoMatrixJR: but if you want to poke, see http://msdn.microsoft.com/en-us/library/4z4t9ed1%28VS.71%29.aspx |
21:58.23 | adamw | NeoMatrixJR: and http://www.petefreitag.com/cheatsheets/ascii-codes/ , which covers a few others not on the msoft site |
22:00.34 | Markinus | phh: newest system, rootfs, kernel. The shouting down of the device isn't working. Hanging on. Ok, now I start it again and do a BATT test |
22:01.44 | _chamonix | phh: I found a bug in the refreshing of the status in ApplySettings but besides that it works fine for reading/writing acpu_vdd |
22:02.28 | Markinus | _chamonix: nice :) |
22:02.28 | NeoMatrixJR | adamw: it may not follow those codes. The RHOD210 map I have now places the fn-w key (brittish pound symbol) as 0xa3 but the MS sheet you sent me places that symbol at 0x9c.... |
22:02.48 | _chamonix | testing 0,3,3,3,3,3,3,3,7 now |
22:03.06 | phh | _chamonix: can you make a "resize data.img" (ie create a new one of the desired size and copy the older.) too ? |
22:03.13 | phh | it has been quite often asked |
22:03.32 | _chamonix | sure, I guess I can put a dd command together |
22:03.40 | phh | and when I tell people I have 512MB data.img, they become jealous. |
22:04.01 | adamw | NeoMatrixJR: codes above 127 aren't entirely standardized, unfortunately. |
22:04.13 | adamw | NeoMatrixJR: I only used that microsoft reference for 0-127. |
22:04.22 | adamw | can't remember where we got the UKP symbol... |
22:04.45 | _chamonix | phh: I'll try a shell script first with unmount + copy + remount and if it works I'll add that |
22:04.54 | phh | _chamonix: umount data ? |
22:04.56 | phh | that'd be tough |
22:05.00 | Markinus | _chamonix: I did a 0,0,0,2,2,2,2,3,3 and it worked - - |
22:05.45 | _chamonix | well if I shut down all processes it should do or not? |
22:06.29 | phh | _chamonix: totally kill android ? |
22:06.32 | phh | well it would work yes |
22:07.32 | _chamonix | Markinus: as I have the battery life with defaults now I'll stick to 0,3,3,3,3,3,3,3,7 for the next run, then try 0,0,0,2,2,2,2,3,3 to see the difference |
22:08.08 | Markinus | _chamonix: yes :) I made now I over night test with default parameters |
22:08.12 | _chamonix | phh: I guess it's safer than trying to move the file while mounted |
22:08.27 | Markinus | (we reduzed it a bit ) |
22:08.29 | phh | _chamonix: right. |
22:09.59 | Markinus | phh: the question is how much is the Turbo mode eating . .. |
22:10.06 | _chamonix | Markinus: is that stepping table explaining y I have the impression I can place phone calls for quite long times without really affecting the battery life? |
22:10.15 | phh | Markinus: before bzo's fixed we ran the cpu overclocked you know :p |
22:10.32 | Markinus | phh: ohhhh :) |
22:10.32 | _chamonix | long times = 2 hours with less than 25% loss of battery |
22:10.49 | phh | Markinus: well only full speed cpu uses pll2 |
22:11.04 | Markinus | phh: ahh, ok, this is good . .. |
22:11.13 | phh | _chamonix: meaning you could make 8hours of call ?!? |
22:11.13 | phh | wow |
22:11.35 | _chamonix | phh: dunno, no one wants to talk to me longer than 2 hours in a row :) |
22:11.40 | Markinus | _chamonix: yes this is good :) |
22:11.43 | Markinus | ha! ;)) |
22:12.41 | _chamonix | today again my meter was at the last segment red and I made 1 hour of call and another hour till the phone went off |
22:13.13 | _chamonix | so to me it looks like the win in battery life is bigger under load than idling/sleeping |
22:17.17 | Captnoord | hmm I could do that |
22:17.18 | Captnoord | :P |
22:17.21 | Captnoord | with my girl |
22:17.55 | _chamonix | lol |
22:18.19 | _chamonix | well after 2 hours I got home so that's y I hung up ;) |
22:18.43 | _chamonix | gnite |
22:19.14 | Captnoord | hmmmm |
22:19.17 | Captnoord | wierd stuff |
22:19.30 | Captnoord | corrected temperature isn't set somewhere |
22:19.31 | Captnoord | :S |
22:20.24 | Captnoord | lol |
22:20.25 | Captnoord | it is |
22:20.28 | Captnoord | I should read better |
22:21.02 | Captnoord | okey |
22:21.07 | Captnoord | now work backwards |
22:21.46 | phh | lol? |
22:22.10 | *** join/#htc-linux bzo (~chatzilla@netblock-68-183-234-14.dslextreme.com) |
22:22.18 | Wout | ey guys |
22:22.23 | Captnoord | yo Wout |
22:22.32 | NeoMatrixJR | did the gsensor/accelerometer for the RHOD get killed recently? It was working for me a while back, but now it doesn't seem to be. |
22:22.45 | phh | NeoMatrixJR: works fine here |
22:23.24 | Wout | Captnoord: any luck on batt? |
22:23.33 | phh | but I don't use any published build :p |
22:24.12 | NeoMatrixJR | phh: hmmm...was anything added to the system.sqsh or rootfs.img to get that to work? |
22:24.32 | phh | system.sqsh |
22:24.36 | phh | sensors.default.so |
22:24.52 | stinebd | any chance you could push that to git? :> |
22:25.05 | phh | stinebd: push what ? |
22:25.07 | stinebd | or already have |
22:25.19 | phh | sensors driver ? |
22:25.22 | stinebd | sensors with rhod support |
22:25.24 | phh | pushed decades ago |
22:25.27 | stinebd | k |
22:25.35 | phh | it's the same userland driver as for topaz |
22:25.38 | phh | (but not the same kernel driver) |
22:25.49 | stinebd | oohh |
22:26.06 | NeoMatrixJR | I see.....hmmmmmm. I'm going to have to find a directory/file compare tool to see the diff between the current XDANDROID system.sqsh and 95-civic's build. Seems sensors and CDMA reside there or rootfs.img |
22:26.47 | phh | stinebd: I already wrote a driver and half for android, I wouldn't do another one for quite the same thing :p |
22:27.08 | phh | NeoMatrixJR: seriously, ask 95-civic for its changes |
22:27.22 | phh | you can't backport everything by yourself ... |
22:27.25 | MrPippy | he said in the thread he would send his patches to makkonen, not sure if anything happened there |
22:27.25 | phh | well you can but that's stupid |
22:27.42 | unholy | neomatrix beyondcompares works fine for compraring files and directorys, i use it when i cook my winmo roms |
22:27.58 | makkonen | haven't heard anything |
22:28.09 | NeoMatrixJR | phh: been there done that. He hits the forums once a month and must have missed my bb and pm requests for his changes. |
22:28.09 | makkonen | I sent him a PM but got no response. |
22:29.04 | NeoMatrixJR | unholy: thanks! I was hoping to find a Win tool too! |
22:29.11 | NeoMatrixJR | ok, off to the chiro...laters |
22:29.56 | phh | MrPippy: will you ever have cdma radio on your phone ? |
22:30.27 | MrPippy | yeah i'm gonna activate it soon |
22:30.40 | phh | NeoMatrixJR: just wait a bit then :p |
22:30.54 | phh | NeoMatrixJR: anyway the change for gsensors is system.sqsh the lib/hw/sensors.default.so file |
22:31.03 | phh | I think you won't need any other change |
22:31.18 | unholy | neomatrix left if im not mistaken |
22:31.37 | phh | he is allowed to read logs. |
22:31.49 | phh | but thanks for pointing me this fact :p |
22:31.53 | unholy | ah right the logs |
22:31.53 | stinebd | lies and slander |
22:31.57 | stinebd | those logs are confidential |
22:32.15 | bzo | phh: am I allowed to dump ARM11_GPIO2 in haret? it locks up when I try |
22:32.28 | phh | ARM11_GPIO2 ... ? |
22:32.42 | bzo | pd 0xa9300000 0x20, the gpio registers |
22:33.33 | MrPippy | yeah it didn't work for me either |
22:33.45 | phh | bzo: weird |
22:34.10 | bzo | is it a bug in haret? |
22:34.50 | Captnoord | nn all |
22:35.01 | bzo | I mean, I assume it is reading it internally to provide gpio traces |
22:36.02 | k_linux | hi guys |
22:36.56 | *** join/#htc-linux randomblame (~randombla@c-71-59-184-96.hsd1.wa.comcast.net) |
22:37.12 | Hoochster | drools over <MrPippy> yeah i'm gonna activate it soon |
22:37.33 | k_linux | phh: I corected the system.sqsh so now esperesso is ready ! |
22:37.50 | MrPippy | hehe just activate my rhod, no idea about cdma data |
22:37.58 | phh | k_linux: ok |
22:37.59 | Hoochster | ohh heh |
22:38.04 | k_linux | look here http://forum.xda-developers.com/showthread.php?t=641021 |
22:38.06 | Hoochster | well it will give you motivation lol |
22:39.10 | k_linux | phh: I don't know what's wrong with wifi now |
22:39.19 | phh | k_linux: I'll try to take a look |
22:39.26 | k_linux | thx |
22:39.28 | phh | but with a diam and a rhod i'm not the best tester for that :p |
22:39.39 | unholy | i can try it |
22:39.41 | unholy | i got a raph |
22:39.49 | phh | yes but you know how to fix wifi ? :p |
22:39.52 | k_linux | phh: diam no but rhod why not |
22:39.54 | unholy | oh nah |
22:39.58 | phh | k_linux: not same wifi chip |
22:39.59 | unholy | i would just test it |
22:40.02 | unholy | xd |
22:40.05 | k_linux | ok |
22:40.14 | *** join/#htc-linux swc|666 (~infidel20@unaffiliated/swc666/x-4934821) |
22:40.27 | phh | unholy: yes you can :p |
22:40.35 | unholy | but im in uni right now the download might be slow |
22:40.40 | *** join/#htc-linux GeertJohan (~Squarc@82-217-32-29.cable.quicknet.nl) |
22:41.43 | unholy | k_linux do i absolutly need that rootfs.img? |
22:41.49 | unholy | and the zimae? |
22:41.55 | unholy | zimage* |
22:42.08 | phh | I hope not |
22:42.12 | k_linux | you can try without it |
22:42.17 | unholy | ok i will |
22:42.25 | phh | k_linux: you changed rootfs ? |
22:42.38 | k_linux | yes |
22:42.48 | unholy | gtg il try it when i get home |
22:43.11 | k_linux | I moded eclairhero.rc and init |
22:43.12 | phh | k_linux: anything to merge ? |
22:43.22 | phh | (I'd like a single rootfs for everyone.) |
22:43.29 | k_linux | with rootfs git ? |
22:43.33 | phh | yes |
22:43.43 | k_linux | will have a look |
22:44.37 | k_linux | phh: this is what I have with wifi |
22:44.40 | k_linux | http://pastebin.com/GVYz6kkZ |
22:45.03 | phh | dmesg ? |
22:45.14 | k_linux | logcat |
22:45.20 | phh | I mean give me dmesg :p |
22:45.25 | phh | there is quite nothing in logcat |
22:45.32 | k_linux | ok |
22:47.10 | phh | k_linux: i guess your rootfs is quite old ? |
22:47.10 | k_linux | phh: what's the cmdline ? :) |
22:47.13 | phh | ie no wifi for rhod ? |
22:47.18 | phh | k_linux: dmesg ? :p |
22:47.53 | phh | just type dmesg I mean. |
22:48.06 | k_linux | phh: that's the one which gives me connexion and gsensor |
22:48.11 | k_linux | ok |
22:49.34 | phh | reboot time. |
22:49.43 | phh | (yes I upload an android build from a running android. |
22:49.44 | phh | ) |
22:50.50 | k_linux | nice |
22:51.26 | k_linux | http://pastebin.com/SFAi6RqE |
22:51.51 | k_linux | that's all what I have as it freezes |
22:52.21 | k_linux | phh: will come back if you are still here |
22:52.53 | phh | freeze ? |
22:52.54 | phh | hum hum |
22:53.10 | phh | anyway, booting |
22:53.36 | k_linux | it turn on ,unable to scan and turn off |
22:53.49 | k_linux | so when it turns off it freezes |
22:53.57 | phh | ok |
22:54.00 | phh | the turn off has been fixed |
22:54.23 | k_linux | I tried the latest rootfs it gives the same thing |
22:54.31 | phh | it's a module problem |
22:54.34 | phh | module/zImage |
22:54.50 | k_linux | ah I wil try a new zImage so |
22:55.25 | k_linux | enjoy the hero boot animation by the way |
22:55.30 | k_linux | will come back |
22:56.08 | phh | oh i didn't noticed it, it's so little :p |
22:56.35 | k_linux | really |
22:56.59 | phh | it really is little, but I noticed it |
22:57.37 | phh | dex building is so slow |
22:57.50 | phh | you put abduction in system ? |
22:57.51 | phh | lol |
22:58.01 | phh | and not the demo |
22:58.52 | phh | argh |
22:58.52 | phh | crashed |
22:59.59 | phh | no ?!? |
23:00.04 | phh | I got hero's boot logo twice |
23:00.06 | phh | bah whatever |
23:01.03 | *** join/#htc-linux MrPippy_ (~pip@adsl-75-11-160-192.dsl.sndg02.sbcglobal.net) |
23:05.33 | randomblame | why is it that when I run make config I don't get our video options |
23:08.56 | MrPippy | ARCH=arm ? |
23:09.19 | randomblame | yes |
23:11.55 | phh | this stupid android 10 works. |
23:11.58 | phh | flash 10* |
23:12.25 | randomblame | ARCH=ARM; make menuconfig? |
23:12.33 | randomblame | is that right? I always edit the defconfig by hand |
23:12.42 | randomblame | and now I remember why |
23:12.50 | MrPippy | i usually put it afterwards, make menuconfig ARCH=arm |
23:13.11 | makkonen | does ARM vs arm matter? |
23:13.20 | phh | makkonen: yes. |
23:14.04 | randomblame | there it is thanks MrPippy, it has to be in that format |
23:14.31 | stinebd | yeah, env variable vs make variable |
23:14.57 | makkonen | it doesn't pass the env variables through, though? |
23:15.39 | randomblame | odd only the epson controller shows up |
23:15.52 | phh | randomblame: we didn't made the Kconfig properly. |
23:15.53 | phh | at all. |
23:16.10 | Markinus | cr2_: I look a bit to the IRQ problem . .the driver is hanging on spin_unlock_irqrestore(&desc->lock, flags); in __setup_irq. Do you know this? Do you have a Idea? |
23:16.23 | randomblame | aparently :D it also doesn't have msm_fb, no wonder I config fb_msm does nothing |
23:16.52 | randomblame | though config mddi worked |
23:17.21 | randomblame | me thinks this is why I can't just start fb_msm and run off the windows ce init |
23:17.33 | *** join/#htc-linux albi74 (~albi74@host195-76-dynamic.19-79-r.retail.telecomitalia.it) |
23:19.03 | *** join/#htc-linux albi74 (~albi74@host195-76-dynamic.19-79-r.retail.telecomitalia.it) |
23:20.50 | *** join/#htc-linux k_linux (~klinux@2002:295c:11ec:7:8200:60ff:fe0f:e800) |
23:23.14 | phh | k_linux: works as expected |
23:23.19 | phh | oops |
23:23.22 | phh | reboot at suspend ?!? |
23:23.38 | phh | it isn't even supposed to sleep |
23:24.00 | k_linux | phh: what? |
23:24.13 | phh | your espresso |
23:24.43 | k_linux | what's wrong with it |
23:24.59 | phh | works fine |
23:25.05 | phh | but it seems it hit a kernel bug. |
23:25.24 | k_linux | so it reboots ? |
23:25.27 | phh | yes |
23:25.49 | k_linux | strange I didn't have any reboot issues |
23:26.05 | k_linux | apart wifi pb |
23:29.09 | k_linux | I'm not sure if power mangement is ok on this build |
23:29.48 | k_linux | phh: how can I check it ? |
23:30.08 | phh | dmesg |grep -Ei "(enter|exit) suspend" |
23:36.36 | k_linux | phh: nothing |
23:37.01 | phh | disconnected usb and let him die^Wsleep ? |
23:37.49 | k_linux | ok |
23:37.56 | *** join/#htc-linux Unholy (~unholy@24.227.27.77) |
23:38.20 | Unholy | yo |
23:38.46 | *** join/#htc-linux rashire (~ed1112war@98.114.89.97) |
23:39.23 | k_linux | Unholy: yo |
23:39.32 | k_linux | Unholy: did u try it ?? |
23:42.03 | k_linux | phh: even when I disconnect it and reconnect it it gives nothing |
23:42.15 | phh | broken then |
23:42.21 | k_linux | yes |
23:42.26 | k_linux | well |
23:42.41 | k_linux | I will try with the new rootfs |
23:42.55 | Unholy | im gona try it right now k_linux |
23:43.37 | k_linux | phh: BT gives this in dmesg : init: no such service 'btips' |
23:43.44 | k_linux | any clues |
23:43.58 | *** join/#htc-linux jumoit (~samuel@121.77.87.145) |
23:44.04 | phh | k_linux: needs some mods to the btips binary |
23:44.30 | k_linux | phh: ok can wait then |
23:45.16 | *** join/#htc-linux marex (~marex@vasut.kolej.mff.cuni.cz) |
23:46.42 | Unholy | k_linux: this is eclair 2.1+sense? |
23:47.52 | k_linux | Unholy: no it's flan or espresso 2.1 cause eclair is 2.0.1 |
23:48.21 | k_linux | Unholy: I ripped all htc's apk to have a smooth OS |
23:52.59 | phh | but not aosp espresso ... |
23:53.05 | phh | anyway, time to sleep |
23:53.12 | Unholy | gn phh |
23:59.09 | randomblame | how do you make mddi.c or fb_msm init without the panel driver |