| 00:08.51 | *** join/#htc-linux ChazCT (n=chazct@216-164-205-85.c3-0.tlg-ubr2.atw-tlg.pa.cable.rcn.com) |
| 00:10.41 | *** join/#htc-linux MSM1 (n=michael@222-155-71-177.jetstream.xtra.co.nz) |
| 00:13.21 | mc | wow. i evidently haven't done enough kernel work |
| 00:13.46 | mc | i'm reading through the code for the battery reading, and i have no friggin idea what's going on |
| 00:13.49 | mc | haha |
| 00:13.56 | tmzt | hmm |
| 00:14.01 | tmzt | that's hard stuff |
| 00:14.52 | makkonen | I get that feeling when I read through the code for anything. I guess that's the upside. I don't know what's really hard and what's not, so I go at it all with the same sort of optimism. |
| 00:15.12 | mc | yeah, that's what i do |
| 00:15.22 | mc | if i see something not working right, i just read the code and see |
| 00:17.18 | mc | i see a bunch of math relating to the current, voltage, temperature, and a fourth variable i don't see documented |
| 00:17.34 | makkonen | what code are you looking at? |
| 00:18.16 | mc | battery.c |
| 00:18.27 | mc | from the linuxtogo git copy of the kernel |
| 00:18.51 | mc | it's arch/arm/mach-msm/battery/battery.c |
| 00:19.02 | mc | htc_get_batt_info is the function i'm reading |
| 00:19.16 | makkonen | it seems to calculate (very poorly) off of voltage - correction factor for charging rate (i.e. voltage goes up if it's charging) + correction factor for discharge rate (voltage goes down if there's a high draw? I don't remember the physics of batteries) |
| 00:19.46 | makkonen | hmm. all I've looked at closely is htc_battery_smem.c from gitorious. don't know if it's similar. |
| 00:19.53 | mc | it's also doing a fudge factor based on temperature |
| 00:20.13 | sse2 | cr2: oops sorry, wasn't here. yeah 16 bytes after a 512 bytes page, as far as I can tell, page size is always 32 times the oob |
| 00:20.15 | makkonen | it's all fudge. |
| 00:20.29 | mc | yeah, it seems it's 90% guess work |
| 00:23.13 | makkonen | what device are you working on? |
| 00:23.20 | mc | A KAISER |
| 00:23.25 | mc | oops, sorry about the caps |
| 00:26.40 | *** join/#htc-linux marcin_ (n=marcin@chello089077185059.chello.pl) |
| 00:29.20 | makkonen | mc: what's the fourth variable? |
| 00:30.04 | tmzt | ask cr2 when he gets back if he gets back |
| 00:30.40 | makkonen | tmzt: does your rhodium display anything for battery status? |
| 00:30.52 | mc | i haven't a clue, i'm still figuring out where it's actually reading the data from |
| 00:30.59 | mc | i found a driver with some i2c calls too |
| 00:32.02 | tmzt | makkonen: I only boot occasionally right now |
| 00:32.07 | tmzt | and not usually android |
| 00:32.32 | makkonen | ok |
| 00:32.42 | mc | what's making me somewhat confused, is i know i've seen when booted messages stating the battery's current is around 2100mAh |
| 00:32.56 | mc | which is really odd seeing as the battery's label says it's only a 1350mAh capacity |
| 00:33.11 | makkonen | I was just wondering, since it's got the same 32bit battery status fields as the cdma devices, if it was as irredeemably effed as they were. |
| 00:33.28 | ToAsTcfh | tmzt: so yay were getting logs!!!! http://pastebin.com/d6a33cd39 |
| 00:33.40 | tmzt | who is? |
| 00:33.57 | makkonen | mc: current would be mA, not mAh, no? |
| 00:33.58 | ToAsTcfh | the heroc kernel joe is working on |
| 00:34.21 | tmzt | current isn't mAh it's mA |
| 00:34.29 | tmzt | cool |
| 00:34.32 | tmzt | how far? |
| 00:34.35 | mc | well that explains that confusion |
| 00:34.36 | ToAsTcfh | its gsm hero turned cdma heroc :D |
| 00:35.16 | mc | i do know, by reading this driver, that it seems it won't be able to measure status right until the battery is seen fully charged while linux is booted |
| 00:35.17 | makkonen | mc: and, furthermore, I don't think there's any way you'd be pulling over 2A. A) the battery would last 30 minutes. B) you'd burn yourself. |
| 00:35.17 | ToAsTcfh | oh were still early init |
| 00:35.43 | mc | it uses a last seen sort of thing to find the capacity |
| 00:36.24 | ToAsTcfh | tmzt: sorry i forgot no links lol |
| 00:36.48 | tmzt | yeah |
| 00:36.53 | *** join/#htc-linux Dinde (i=kayser@sur-internet.net) |
| 00:37.15 | ToAsTcfh | why cant u get links again? |
| 00:38.18 | tmzt | I used to highlight them with stylus but now that scrolls |
| 00:38.40 | ToAsTcfh | ahh ur on the phone |
| 00:39.09 | tmzt | yes |
| 00:39.30 | ToAsTcfh | i havent found a good irc client for android. they have a few but i cant get any of them to work |
| 00:40.13 | ToAsTcfh | but yeah were now at failing smd issues |
| 00:41.27 | tmzt | that's normal |
| 00:41.35 | ToAsTcfh | [ 4.657135] msm_pm_wait_state(80, 0, 0, 0) failed 10d29 |
| 00:41.35 | ToAsTcfh | [ 4.657135] msm_sleep(): msm_pm_wait_state failed, 10d29 |
| 00:41.35 | ToAsTcfh | [ 4.657135] _smem_find(93): not allocated. |
| 00:41.35 | ToAsTcfh | [ 4.776977] synaptics_ts_work_func: bad read 0 0 ff ff ff ff ff ff ff ff ff ff ff ff ff, ret 2 |
| 00:41.35 | ToAsTcfh | [ 4.779449] _smem_find(93): not allocated. |
| 00:41.38 | tmzt | add something to dump smsm table |
| 00:42.01 | tmzt | you can't expect pm to work yet |
| 00:42.03 | tmzt | disable it |
| 00:42.11 | tmzt | including apps sleep |
| 00:42.19 | ToAsTcfh | pm? |
| 00:42.29 | tmzt | also i2c for synaptics might be different address |
| 00:42.33 | tmzt | or it's cypress |
| 00:42.38 | tmzt | power management |
| 00:42.44 | ToAsTcfh | oh yeah |
| 00:43.12 | tmzt | just disable drivers until they work |
| 00:43.26 | tmzt | you can run i2ctools from userspace |
| 00:43.34 | ToAsTcfh | yeah smd for the hero looks alot like the diam/raph stuff. almost word for word |
| 00:44.11 | tmzt | try raph800 stuff |
| 00:44.16 | ToAsTcfh | it looks like the winmo stuff but tightened up |
| 00:44.20 | tmzt | but dump smsm first |
| 00:44.36 | ToAsTcfh | how to dump it |
| 00:45.29 | tmzt | for loop? |
| 00:45.44 | ToAsTcfh | yeah we get a boot loop |
| 00:45.53 | tmzt | huh |
| 00:46.06 | tmzt | no, iterate through the table and dump the entires |
| 00:46.14 | tmzt | or check the log and grep them out |
| 00:46.51 | ToAsTcfh | /proc/last_kmsg |
| 00:46.59 | ToAsTcfh | is what are log is |
| 00:47.08 | tmzt | cool |
| 00:47.14 | tmzt | how did you do that? |
| 00:47.23 | ToAsTcfh | majrep |
| 00:47.33 | ToAsTcfh | did it |
| 00:47.49 | ToAsTcfh | i guess it just happened after he played all night |
| 00:48.05 | tmzt | are you missing smd devicees? |
| 00:48.42 | ToAsTcfh | 4.330200] _smem_find(93): not allocated. |
| 00:48.51 | tmzt | right |
| 00:49.01 | tmzt | why are you using smem_find? |
| 00:49.03 | *** join/#htc-linux alphaone|gone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 00:49.08 | tmzt | also, try the raph800 version |
| 00:49.13 | tmzt | it's for 7501a |
| 00:49.54 | ToAsTcfh | git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git? |
| 00:50.15 | tmzt | no |
| 00:50.22 | tmzt | gitorious.org now |
| 00:50.22 | ToAsTcfh | uhg |
| 00:50.29 | tmzt | search for qualcomm |
| 00:50.48 | tmzt | see what changes were made for smsm and smem |
| 00:50.56 | tmzt | import those to your kernel |
| 00:51.03 | ToAsTcfh | yeah he put the heroc kernel up there |
| 00:51.25 | tmzt | source? |
| 00:51.28 | tmzt | on ltg? |
| 00:53.28 | ToAsTcfh | yeah the converted source. search for heroc. its the only thing that will come up lol |
| 00:54.11 | ToAsTcfh | he was saying that hard-coded fifo buffer offsets may be an issue with using stuff from the daim/raph |
| 00:54.57 | ToAsTcfh | ours are actually stored in the heap toc |
| 00:55.22 | ToAsTcfh | idk but ill look into the raph800 |
| 00:56.09 | ToAsTcfh | wait he put the heroc up on github sorry |
| 00:59.11 | tmzt | where is it? |
| 00:59.31 | tmzt | why hard coded? |
| 00:59.44 | tmzt | oh, the raph800 stuff is hard coded, I see |
| 00:59.47 | tmzt | yeah I forgot |
| 00:59.56 | tmzt | add full smem dump driver to dbgfs |
| 01:00.08 | tmzt | and you can find the relevant structs in there |
| 01:02.50 | *** join/#htc-linux ALoGeNo (n=alogeno@unaffiliated/alogeno) |
| 01:05.26 | *** join/#htc-linux ALoGeNo (n=alogeno@unaffiliated/alogeno) |
| 01:10.19 | ToAsTcfh | tmzt: still cant find smem dump. whats it calledor haw to enable? |
| 01:10.46 | tmzt | you have to write it |
| 01:10.56 | tmzt | no different than last_kmesg I think |
| 01:11.34 | *** join/#htc-linux Traveler0 (n=traveler@cpe-066-057-232-249.nc.res.rr.com) |
| 01:11.57 | ToAsTcfh | ohhhh. u didnt know i suck at c. i hope its already been done |
| 01:13.56 | tmzt | just change the address :) |
| 01:18.30 | *** join/#htc-linux randomblame (n=kevin@c-71-59-184-96.hsd1.wa.comcast.net) |
| 01:19.27 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) |
| 01:21.02 | *** join/#htc-linux theknigh (n=cfnzin@89.180.2.154) |
| 01:33.34 | *** join/#htc-linux kupo (i=kupo@pinky.ratman.org) |
| 01:33.49 | ToAsTcfh | tmzt: i hope tios is what is for raph800 git://gitorious.org/linux-on-qualcomm-s-msm/linux-msm.git |
| 01:34.02 | ToAsTcfh | im pull ng it now |
| 01:34.27 | tmzt | yes |
| 01:37.08 | ToAsTcfh | sweet. yeah i cant find the last_kmesg deal even with grep. so ill just look at the raph800 stuff till i can find it |
| 01:37.50 | ToAsTcfh | this repository is massive!!! |
| 01:44.09 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 01:44.21 | tmzt | it's not in there |
| 01:44.25 | tmzt | it's in heroc |
| 01:44.44 | ToAsTcfh | i know thats what im greping |
| 01:44.45 | tmzt | do you have htc-msm-2.6.27 from linux-msm checked out? |
| 01:44.50 | tmzt | git grep |
| 01:48.50 | *** join/#htc-linux m3dlg (n=m3dlg@bb-87-81-252-83.ukonline.co.uk) |
| 01:51.21 | *** join/#htc-linux MSM (n=michael@222-155-66-94.jetstream.xtra.co.nz) |
| 01:54.17 | *** join/#htc-linux theknigh (n=cfnzin@89.180.2.154) |
| 01:54.17 | *** join/#htc-linux marcin_ (n=marcin@chello089077185059.chello.pl) |
| 01:54.17 | *** join/#htc-linux Tinyboom_ (n=nahh@ti0121a340-dhcp0200.bb.online.no) |
| 01:54.17 | *** join/#htc-linux Sti_0239 (n=Where_is@155.214-244-81.adsl-dyn.isp.belgacom.be) |
| 01:54.17 | *** join/#htc-linux rashire (n=ed1112wa@pool-98-114-205-192.phlapa.fios.verizon.net) |
| 01:54.18 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 01:54.18 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 01:54.18 | *** join/#htc-linux mrmoku|away (n=mrmoku@ppp-188-174-7-126.dynamic.mnet-online.de) |
| 01:54.18 | *** join/#htc-linux kam187 (n=kam187@81-179-8-102.dsl.pipex.com) |
| 01:54.18 | *** join/#htc-linux Kevin2 (n=Kevin2@207-172-165-101.s101.tnt1.nywnj.ny.dialup.rcn.com) |
| 01:54.18 | *** join/#htc-linux DJWillis (n=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 01:54.18 | *** join/#htc-linux mpurcell (n=mpurcell@sholes.info) |
| 02:00.45 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) |
| 02:03.03 | *** join/#htc-linux CyberScript32_ (n=cfnzin@89.180.2.154) |
| 02:18.39 | *** join/#htc-linux babijoee (n=joee@110.33.178.90) |
| 02:44.59 | *** join/#htc-linux ToAsTcfh (n=toast@110-43.200-68.tampabay.res.rr.com) |
| 02:52.58 | ToAsTcfh | damb i miss typed my email when adding my nick now im fuct on some channels |
| 03:15.32 | *** join/#htc-linux CoKe_Lappy (n=imcokema@pool-96-240-154-30.hrbgpa.fios.verizon.net) |
| 03:35.43 | *** join/#htc-linux jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) |
| 04:08.55 | *** join/#htc-linux NexVision (n=a@c-76-109-33-88.hsd1.fl.comcast.net) |
| 04:09.15 | *** join/#htc-linux Psychonerd (n=Casey@67.143.1.240) |
| 05:10.02 | *** join/#htc-linux tehtrk_home (n=quassel@adsl-68-91-145-91.dsl.wacotx.swbell.net) |
| 05:17.48 | *** join/#htc-linux droid001 (n=g1@p4FDC939A.dip.t-dialin.net) |
| 05:56.37 | *** join/#htc-linux goxboxlive (n=jrs@mail2.hjellnesconsult.no) |
| 06:25.21 | *** join/#htc-linux marcydarcy (i=4d18075f@gateway/web/freenode/x-lywefcuuwbcascti) |
| 06:33.19 | maejrep | tmzt: it boots! |
| 06:33.41 | maejrep | doesn't do much after that. but it boots, and initializes the panel, and registers my nav/keypad presses |
| 06:33.57 | maejrep | finds all the mtd partitions, but doesn't seem to be mounting them |
| 06:34.13 | maejrep | akm and microp i2c drivers are still throwing errors |
| 06:34.22 | maejrep | http://xda.privatepaste.com/209bb8c85e |
| 07:06.51 | *** join/#htc-linux jumoit (n=samuel@121.77.87.145) |
| 07:22.56 | *** join/#htc-linux toer (i=tore@179.81-166-86.customer.lyse.net) |
| 07:29.27 | *** join/#htc-linux toi (n=toi@d54C2A96D.access.telenet.be) |
| 07:46.54 | *** join/#htc-linux recKon (n=kvirc@124.82.62.121) |
| 07:57.40 | *** join/#htc-linux kiozen (n=oeichler@p549215DE.dip0.t-ipconnect.de) |
| 08:11.49 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
| 08:14.59 | *** join/#htc-linux itchy8me (n=itchy8me@ip80-116-211-87.adsl2.static.versatel.nl) |
| 08:45.26 | *** join/#htc-linux leobaillard (n=leobaill@leobaillard.org) |
| 08:47.27 | *** join/#htc-linux jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) |
| 09:00.13 | *** join/#htc-linux kvaster_ (n=kvaster@93.84.112.80) |
| 09:17.51 | *** join/#htc-linux MrPippy (n=pip@adsl-75-37-167-3.dsl.sndg02.sbcglobal.net) |
| 09:18.37 | *** join/#htc-linux Markinus (n=markus@gtng-4db043bb.pool.mediaWays.net) |
| 09:24.13 | *** join/#htc-linux rayman18 (n=opera@residL-102-227.uc3m.es) |
| 09:44.27 | *** join/#htc-linux apt_ (i=ibot@rikers.org) |
| 09:44.27 | *** topic/#htc-linux is Welcome to htc-linux | Project homepage and wiki http://htc-linux.org | Livelogs: http://irclog.netripper.com/?chan=htc-linux | Logs: http://apt.rikers.org/%23htc-linux | htc-linux is not android |
| 09:49.56 | *** join/#htc-linux zz_rosseaux (i=znc@129-167-19-84.nbiserv.com) |
| 09:51.26 | *** join/#htc-linux kvaster (n=kvaster@93.84.112.80) |
| 10:16.03 | *** join/#htc-linux slight (n=23hdci27@217.130.58.175) |
| 10:16.35 | slight | hi. is there any way to set up a kernel syslog type arrangement to the sd card on eclair? |
| 10:17.00 | slight | phone keeps hanging, i think when a certain app brings it out of sleep, but hard to tell which |
| 10:20.12 | *** join/#htc-linux MarcLandis (n=drettsch@port-92-195-10-37.dynamic.qsc.de) |
| 10:37.49 | *** join/#htc-linux nrirclog600 (n=nrirclog@netripper.com) |
| 10:38.06 | *** join/#htc-linux alphaone|gone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 10:44.05 | *** join/#htc-linux apt (i=ibot@rikers.org) |
| 10:44.05 | *** topic/#htc-linux is Welcome to htc-linux | Project homepage and wiki http://htc-linux.org | Livelogs: http://irclog.netripper.com/?chan=htc-linux | Logs: http://apt.rikers.org/%23htc-linux | htc-linux is not android |
| 10:44.06 | *** join/#htc-linux alphaone|gone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 10:44.28 | *** join/#htc-linux droid001 (n=g1@p4FDC939A.dip.t-dialin.net) |
| 10:48.53 | *** join/#htc-linux apt (i=ibot@rikers.org) |
| 10:48.53 | *** topic/#htc-linux is Welcome to htc-linux | Project homepage and wiki http://htc-linux.org | Livelogs: http://irclog.netripper.com/?chan=htc-linux | Logs: http://apt.rikers.org/%23htc-linux | htc-linux is not android |
| 10:49.47 | *** join/#htc-linux alphaone|gone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 10:54.18 | *** join/#htc-linux apt (i=ibot@rikers.org) |
| 10:54.18 | *** topic/#htc-linux is Welcome to htc-linux | Project homepage and wiki http://htc-linux.org | Livelogs: http://irclog.netripper.com/?chan=htc-linux | Logs: http://apt.rikers.org/%23htc-linux | htc-linux is not android |
| 11:41.59 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 11:55.12 | *** part/#htc-linux jumoit (n=samuel@121.77.87.145) |
| 12:01.05 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 12:19.43 | *** join/#htc-linux Billyonthemounta (n=Miranda@stiitcsc412.epfl.ch) |
| 12:19.43 | *** join/#htc-linux tsamolotoff (i=tsamolot@188.162.62.141) |
| 12:19.49 | tsamolotoff | hi there |
| 12:20.40 | tsamolotoff | i'm a happy owner of a snapdragon-enabled device.. So guys, who can hint me at the right ramaddr for qsd8x50? |
| 12:24.23 | *** join/#htc-linux sxe (n=quassel@ip-62-143-102-161.unitymediagroup.de) |
| 12:24.25 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 12:30.39 | *** join/#htc-linux tsamolotoff (i=tsamolot@188.162.62.141) |
| 12:30.50 | tsamolotoff | anyone here? |
| 12:33.53 | slight | it's been pretty quiet for a while |
| 12:34.03 | tsamolotoff | so, what's about qsd8x50? |
| 12:34.10 | slight | no idea sorry |
| 12:34.27 | tsamolotoff | :( |
| 12:34.39 | slight | i was here for help too, not a kernel dev :) |
| 12:34.44 | tsamolotoff | maybe google nexus kernel branch can help me |
| 12:35.36 | *** join/#htc-linux GNUtoo (n=GNUtoo@host82-133-dynamic.54-79-r.retail.telecomitalia.it) |
| 12:35.58 | tsamolotoff | tried to compile codeaurora's qsd branch myself with 2009-q3 toolchain from codesourcery, it didn't want to compile if vfp/neon were enabled... |
| 12:36.34 | *** join/#htc-linux dacm_work (n=dan@host86-177-183-160.range86-177.btcentralplus.com) |
| 12:38.27 | dacm_work | Hi guys. |
| 12:38.44 | dacm_work | Anyone got linux on and HD2 or a Touch Pro 2 yet? |
| 12:41.15 | tsamolotoff | and what's the problems with TP2? It's based on the same chip as TP |
| 12:55.30 | *** join/#htc-linux zycho (n=zycho@f054218011.adsl.alicedsl.de) |
| 13:08.34 | *** join/#htc-linux stefand1 (n=stefan@uu194-7-153-125.unknown.uunet.be) |
| 13:10.55 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 13:17.10 | *** join/#htc-linux gnutoo_ (n=GNUtoo@host82-133-dynamic.54-79-r.retail.telecomitalia.it) |
| 13:21.21 | *** join/#htc-linux toi (n=toi@d54C2A96D.access.telenet.be) |
| 13:23.44 | *** part/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 13:27.24 | tsamolotoff | is there some way to calculate ram addr myself? |
| 13:46.03 | slight | maybe there's some info about your device on the wiki? |
| 13:46.05 | slight | http://www.htc-linux.org/wiki/index.php?title=Main_Page |
| 13:46.38 | slight | might be worth checking the xda devs wiki too |
| 13:46.54 | slight | http://wiki.xda-developers.com/ |
| 13:47.10 | slight | mostly htc but i think there are some other devices on there too |
| 13:47.44 | slight | mostly winmo information but there are linux/android pages on there too |
| 13:50.53 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 14:02.57 | *** join/#htc-linux babijoee (n=joee@110.33.178.90) |
| 14:35.01 | *** join/#htc-linux zycho (n=zycho@f049099031.adsl.alicedsl.de) |
| 14:37.08 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 14:40.15 | *** join/#htc-linux alphaone|gone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 14:44.24 | tsamolotoff | I've read some on XDA... and it seems that all the things are WiP |
| 14:44.35 | tsamolotoff | so we need to wait another year or so |
| 14:49.55 | *** join/#htc-linux kholk`AFK (n=kholk@unaffiliated/kholk) |
| 14:50.46 | kholk | hi all :D |
| 15:02.00 | *** part/#htc-linux kam187 (n=kam187@81-179-8-102.dsl.pipex.com) |
| 15:09.50 | *** join/#htc-linux ToAsTcfh (n=toast@110-43.200-68.tampabay.res.rr.com) |
| 15:17.20 | *** join/#htc-linux recKon (n=kvirc@60.51.90.14) |
| 15:25.57 | *** join/#htc-linux mitmancz (n=mitmancz@host-77-236-204-43.blue4.cz) |
| 15:28.27 | *** join/#htc-linux leviathan (n=quassel@c-82-192-226-27.customer.ggaweb.ch) |
| 15:28.45 | YellowGTO|Nix | http://fatpita.net/?i=4549 |
| 15:37.59 | *** join/#htc-linux emwe (n=michael@86.56.50.180) |
| 15:44.21 | *** join/#htc-linux Boydell (n=Boydell@69.49.58.28) |
| 15:48.44 | *** join/#htc-linux sdt555 (n=titus@70.113.113.232) |
| 15:53.41 | *** join/#htc-linux doyser[1] (n=ircap@137.Red-88-17-109.dynamicIP.rima-tde.net) |
| 15:53.45 | doyser[1] | hi all |
| 15:54.05 | doyser[1] | anyone can or have information or skill in hylafax? |
| 15:54.16 | *** part/#htc-linux sdt555 (n=titus@70.113.113.232) |
| 16:05.04 | *** join/#htc-linux pH5 (n=ph5@e178210121.adsl.alicedsl.de) |
| 16:05.13 | *** join/#htc-linux pH5_ (n=ph5@e178210121.adsl.alicedsl.de) |
| 16:07.25 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-93-251-206.bak.res.rr.com) |
| 16:11.25 | doyser[1] | anyone can or have information or skill in hylafax? |
| 16:13.02 | *** join/#htc-linux klinux2 (n=root@41.140.8.197) |
| 16:18.58 | *** part/#htc-linux klinux2 (n=root@41.140.8.197) |
| 16:28.17 | *** join/#htc-linux surgex (n=surge@sw.attotech.com) |
| 16:29.00 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 16:31.16 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 16:36.19 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-93-251-206.bak.res.rr.com) |
| 16:44.11 | *** join/#htc-linux MarcLandis (n=drettsch@port-92-195-10-37.dynamic.qsc.de) |
| 16:56.17 | *** join/#htc-linux cyberdesigner (n=cyberdes@port-92-206-51-67.dynamic.qsc.de) |
| 17:02.49 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-93-251-206.bak.res.rr.com) |
| 17:10.41 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87ccb4.pool.mediaWays.net) |
| 17:21.40 | *** join/#htc-linux cyberdesigner (n=cyberdes@port-92-206-51-67.dynamic.qsc.de) |
| 17:22.28 | *** join/#htc-linux leobaillard (n=leobaill@leobaillard.org) |
| 17:26.24 | *** join/#htc-linux mitmancz (n=mitmancz@host-77-236-194-235.blue4.cz) |
| 17:27.25 | *** join/#htc-linux NexVision (n=a@c-76-109-33-88.hsd1.fl.comcast.net) |
| 17:29.11 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 17:49.06 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-93-251-206.bak.res.rr.com) |
| 17:50.00 | *** join/#htc-linux Boydell (n=Boydell@69.49.58.28) |
| 17:50.17 | *** join/#htc-linux kvaster (n=kvaster@live.bn.by) |
| 17:51.59 | *** join/#htc-linux babijoee (n=joee@110.33.178.90) |
| 17:56.49 | *** join/#htc-linux Camden (n=Camden@166.135.139.61) |
| 17:57.17 | Camden | Good morning, folks |
| 17:57.27 | Boydell | Mornin |
| 17:57.29 | AstainHellbring | morning Camden |
| 17:57.51 | leobaillard | evening ;) |
| 17:58.03 | Camden | Nice job on the 1-16 build. Fast, nice. Thanks. |
| 17:58.12 | Boydell | Yah, I guess I should be saying afternoon now lol |
| 17:58.41 | Camden | Btw chatting on it lol. Decent IRC client for droid=AndChat |
| 17:59.50 | Camden | Having a phone w/ irc seems so futuristic to me. |
| 17:59.54 | phh | [13:26:36] <tsamolotoff> i'm a happy owner of a snapdragon-enabled device.. So guys, who can hint me at the right ramaddr for qsd8x50? <----- just read the source code |
| 18:00.20 | phh | I mean mahimahi's source code |
| 18:05.29 | *** join/#htc-linux mickey|office (n=Mickey@dialbs-092-079-168-007.static.arcor-ip.net) |
| 18:07.01 | phh | Markinus: for GPS, try something else, try using android's libgps |
| 18:11.25 | Markinus | if I enable the gps it'S crashing after 2 oder 3 seconds. .. |
| 18:12.02 | Markinus | I think libgps doesn't help there .. or? |
| 18:12.41 | phh | crashing ? |
| 18:12.43 | phh | ARM9 ? |
| 18:13.01 | Markinus | yes .. . |
| 18:13.09 | phh | oh ok |
| 18:13.19 | phh | bah that's the logs cr2 want :p |
| 18:13.32 | *** join/#htc-linux c2d (n=Mike@port-92-200-124-245.dynamic.qsc.de) |
| 18:13.36 | Markinus | in the most cases is frizing without any crash output. . |
| 18:13.49 | phh | once the ARM9 reset (he is not crashing actually -_-') problem is fixed, gps should be easy |
| 18:13.52 | phh | Markinus: ramconsole ? :p |
| 18:14.06 | Markinus | there no too . . . |
| 18:14.14 | Markinus | strange. . |
| 18:16.13 | Markinus | did you know the exactly version of AMSS an Dia oder Raph? Is this exactly 5200 ?? It seems that people have problem the the last automatic build . .. AMSS detection . . |
| 18:16.23 | Markinus | or |
| 18:16.38 | phh | 52.25 I think |
| 18:17.03 | phh | and I have 52.26 |
| 18:17.15 | phh | 52.26a |
| 18:17.18 | phh | (sim unlock) |
| 18:17.46 | phh | Markinus: you'd better do comparative instead of == (ie if amss>5200 && amss < 5300) |
| 18:18.56 | Markinus | yes, I thing so, too |
| 18:19.03 | Markinus | to many cases |
| 18:21.55 | phh | if we had HTC's doc we could do something more precise ... but well... we don't :p |
| 18:23.45 | Markinus | yes . . .:-( I change this, but a bit closer, a range of 20 is okay too. . . in other case we have a problem with e.g. 6125 and 5150 |
| 18:23.48 | Markinus | 6150 |
| 18:24.03 | phh | 6150 are android devices no ? |
| 18:24.48 | babijoee | hi guys |
| 18:25.11 | phh | Markinus: many people seems to complain about power management on topa/rhod, just to be sure, it's just that they are doing some stupid stuff, like for raph/diam/blac ? |
| 18:25.17 | phh | hi babijoee |
| 18:25.41 | phh | well you might have problems with wifi on donut |
| 18:26.31 | *** join/#htc-linux rayman18 (n=opera@residL-102-227.uc3m.es) |
| 18:26.32 | phh | time to eat |
| 18:31.49 | Camden | Turning wifi off in the initial setup wizard froze my phone, on the 1-16 build. |
| 18:33.47 | Camden | But once the wizard was done, I was able to shut it off normally. |
| 18:35.03 | Markinus | phh: heard this is working very well. I forgot to exit android last night and let my mobile run. After 10h a had ca. 15% accu less, I think this is good! The once problem is the resume of the screen, it needs ca. 5, I don't know how I can do it faster . . |
| 18:37.00 | Camden | Markinus: what is ca. 5? |
| 18:37.10 | *** part/#htc-linux rayman18 (n=opera@residL-102-227.uc3m.es) |
| 18:39.05 | tmzt | about (circa) |
| 18:39.25 | phh | Markinus: don't ever trust our battery indicator. |
| 18:39.28 | phh | well |
| 18:39.35 | phh | just for tendency |
| 18:40.13 | tmzt | phh: reset? we can do that now? |
| 18:40.26 | phh | tmzt: arm9 reset ? |
| 18:40.30 | Camden | Thanks tmzt |
| 18:40.54 | phh | tmzt: for gps to work, we need to survive an ARM9 reset |
| 18:41.08 | *** join/#htc-linux kvaster (n=kvaster@live.bn.by) |
| 18:41.45 | phh | tmzt: and everything I could test survives, only dex doesn't |
| 18:42.38 | Markinus | Camden: 5 seconds |
| 18:43.01 | phh | oh |
| 18:43.07 | phh | 5seconds not 5% battery. |
| 18:43.19 | Markinus | no |
| 18:43.27 | phh | same problem here |
| 18:44.10 | Markinus | ahh, ok . . .. |
| 18:44.22 | phh | babijoee: btw, 230 pages in less than a month for your android thread. It's even worst than diamond android thread :p |
| 18:45.43 | tmzt | it must be possible if ce does it |
| 18:46.22 | phh | tmzt: ce does ~ 3seconds, we aren't that far |
| 18:46.34 | phh | imho we just need to parallelize backlight on and panel on |
| 18:47.45 | tmzt | oh, so we have to resume in less than 3 seconds? |
| 18:47.57 | tmzt | or make them late_resume |
| 18:48.18 | tmzt | have you done anything else with 2.6.32? this should bbe better there |
| 18:56.55 | chamonix | hey guys |
| 18:57.22 | Camden | What's kickin, ninja? |
| 18:58.01 | phh | I definitely need a notebook (litteraly). I know there was something I wanted to say to chamonix but I forgot what :( |
| 18:59.00 | chamonix | :) |
| 18:59.33 | slight | hey :) is there any way to set up a syslog for kernel messages on android? |
| 18:59.34 | chamonix | phh: I just finished installing hspl and the custom rom for booting xdandroid.... I just had to convice my wife to install SP2 |
| 18:59.43 | chamonix | dmesg |
| 18:59.45 | phh | :) |
| 18:59.45 | slight | getting lockups in sleep |
| 18:59.51 | *** join/#htc-linux ShadowPhoenix (n=gah@c-98-227-74-29.hsd1.il.comcast.net) |
| 18:59.52 | slight | yeah no good once it's locked up ;) |
| 18:59.58 | phh | slight: which board ? |
| 18:59.59 | phh | ~ramconsole |
| 19:00.00 | apt | it has been said that ramconsole is pwf dm 0x8e0000 0x20000 |
| 19:00.02 | phh | ~ramconsole-diag |
| 19:00.03 | slight | raph100 |
| 19:00.03 | phh | ~ramconsole-diam |
| 19:00.04 | apt | rumour has it, ramconsole-diam is pwf dm 0x00800000 0x00100000 |
| 19:00.07 | phh | slight: ok first one then :p |
| 19:00.29 | slight | sorry, what do i do with that? :) |
| 19:00.48 | phh | slight: create a new folder, put haret.exe in it |
| 19:01.16 | phh | create a default.txt file which contains pwf dm 0x8e0000 0x20000 |
| 19:01.28 | phh | then start haret |
| 19:01.29 | *** join/#htc-linux daedric (n=daedric@205.56.54.77.rev.vodafone.pt) |
| 19:01.33 | phh | it will create a dm file |
| 19:01.36 | slight | as a separate line, not a boot param? |
| 19:01.47 | phh | *create* a default.txt file |
| 19:01.52 | slight | yeah |
| 19:01.58 | chamonix | phh: to whom shall I talk when it comes to merge some code into android, rebuild it all and pack it to system.sqsh ? I've a valid patch for the SMS problem.... it was rejected by google for whatever reason, the same author merged it into a custom donut |
| 19:01.59 | *** join/#htc-linux pershoot (n=pershoot@cpe-72-227-138-97.nyc.res.rr.com) |
| 19:02.05 | pershoot | hey all |
| 19:02.15 | phh | chamonix: ARGH |
| 19:02.16 | slight | oh |
| 19:02.28 | slight | sorry, default.txt / startup.txt confusion :) |
| 19:02.35 | chamonix | seems noone cares about signs > 7bit |
| 19:02.50 | stinebd | 7 bits should be enough for anybody |
| 19:02.55 | chamonix | rofl |
| 19:03.06 | chamonix | slaps stinebd with a éöÀê |
| 19:03.07 | slight | thanks phh |
| 19:03.12 | phh | chamonix: I assume it's a java part ? |
| 19:03.15 | chamonix | sure |
| 19:03.24 | chamonix | smsservice among aother |
| 19:03.24 | phh | so we have to rebuild everything. |
| 19:03.25 | phh | have fun. |
| 19:03.32 | phh | sorry |
| 19:03.34 | phh | s/we/you |
| 19:03.43 | pershoot | ive built htc msm 2.6.32 for HTC dream (g1) from leviathan-incoming, but needed to disable CONFIG_USB_FUNCTION_ETHER in order for it to build successfully. is there a patch available to amend this for dream hardware? |
| 19:03.46 | chamonix | the build ran the other day but ended with some overflow |
| 19:04.03 | phh | chamonix: you have java 1.5 ? |
| 19:04.13 | chamonix | yes, I installed it besides 1.6 |
| 19:04.19 | phh | ok |
| 19:04.22 | phh | you'll have to tell me how :p |
| 19:04.25 | chamonix | btw how can some1 still use an unsupported version of java? |
| 19:04.31 | phh | :p |
| 19:04.55 | chamonix | easy.... just install, and export a specific JAVA_HOME |
| 19:05.04 | daedric | Just like someone uses windows... |
| 19:05.06 | chamonix | add bin to PATH, ur set |
| 19:05.07 | phh | iirc i haven't found it at all :p |
| 19:05.19 | chamonix | lol |
| 19:05.23 | phh | chamonix: anyway, want to have fun with nand ? |
| 19:05.27 | chamonix | tell me when u get at it |
| 19:05.41 | chamonix | phh: y do u think I hspl-ed ? :P |
| 19:05.53 | phh | that ? :p |
| 19:06.04 | *** join/#htc-linux GregLem (n=greg@lal69-5-88-171-98-250.fbx.proxad.net) |
| 19:06.24 | chamonix | lol |
| 19:06.31 | phh | chamonix: I have to understand some things before though about partitioning |
| 19:07.00 | chamonix | as long as I'm not the one who has to explain it to you I think we are safe :) |
| 19:07.26 | phh | chamonix: anyway, in /lib/modules you should have some mtdblabla.ko modules |
| 19:07.27 | phh | load them |
| 19:08.12 | chamonix | I read something from babijoee in the forum about certain RAPHs having a different memory capacity..... what's about that and how do I find out? |
| 19:08.24 | phh | dd if=/dev/block/mtdblock0 of=/sdcard/dump-nand bs=8192 |
| 19:08.28 | phh | du -sh /sdcar/dump-nand |
| 19:09.28 | Camden | So, I know this gets asked everyday, but I remember it being talked about here on Friday, but don't recall the details: how far are we from nand flashing android to our devices? |
| 19:09.30 | phh | and you'll have a backup of your nand (just not the AMSS part) too :p |
| 19:09.31 | chamonix | I'm afraid I don't have those, I only have lzo*, ramz*, wlan, tiwlan and xvmalloc |
| 19:09.44 | phh | chamonix: download latest zImage + modules at glemsom's |
| 19:09.52 | phh | well not latest. |
| 19:10.05 | chamonix | awwwww, I run the one I compiled yesterday, it won't copy "official" modules will it? |
| 19:10.24 | phh | ah no. |
| 19:10.40 | phh | well if your tree isn't marked as dirty, glemsom's modules should work |
| 19:10.57 | chamonix | let me get back to the latest stable I have |
| 19:12.56 | chamonix | booting |
| 19:14.07 | phh | oh it's not mtdblock0 to use, but mtdchar |
| 19:14.45 | phh | and it's in /dev/mtd/mtd0ro |
| 19:14.55 | chamonix | I must say that lightnhb2 is really cool |
| 19:15.07 | phh | *2* ? |
| 19:15.09 | phh | argh. |
| 19:15.17 | phh | you need the 3 |
| 19:15.57 | phh | babijoee: do you know where it is ? |
| 19:16.19 | chamonix | phh: so that would be : dd if=/dev/mtd/mtd0ro/mtdchar of=/sdcard/dump-nand bs=8192 |
| 19:16.28 | phh | na |
| 19:16.31 | phh | /dev/mtd/mtd0ro |
| 19:17.02 | chamonix | k |
| 19:17.43 | chamonix | well I picked lightnhb from the first page of the tread, is it an outdated one |
| 19:17.55 | chamonix | brb, dinner |
| 19:18.33 | phh | this one prevent us from using the nand properly |
| 19:18.46 | phh | well the worst thing that may happen is that you'll have to reflash, so we can still try |
| 19:18.48 | ShadowPhoenix | Quick question, is there a big difference from diamond to touch pro1? |
| 19:19.29 | phh | TP has more memory (ram and nand) |
| 19:19.30 | Markinus | phh: changes are commited. Sould now work with the next build . . |
| 19:19.34 | phh | different screen panel |
| 19:19.42 | phh | Markinus: ok |
| 19:19.56 | phh | ShadowPhoenix: apart from that it's the usual published differences |
| 19:20.11 | ShadowPhoenix | phh: is it worth it? I am really on the edge of getting one of them and coding with it |
| 19:20.14 | phh | (keyboard, flash, SD and such) |
| 19:20.41 | phh | ShadowPhoenix: currently not, but it might be useful quite soon |
| 19:21.16 | ShadowPhoenix | phh: are there any propriatary chips in there that we can't use? |
| 19:21.39 | *** join/#htc-linux kvaster_ (n=kvaster@live.bn.by) |
| 19:21.46 | phh | the whole msm chip is propriatary :p |
| 19:22.32 | ShadowPhoenix | phh: can we still use it to make calls though :)? I worked before and got burned badly by an unmarked audio chip\ |
| 19:22.47 | phh | yes we can |
| 19:23.10 | phh | afaik, everything has an open driver, but 3D, and GPS |
| 19:23.27 | phh | and video decompression |
| 19:23.50 | ShadowPhoenix | phh: how is video decompression done? |
| 19:23.59 | phh | currently it's just not :p |
| 19:24.12 | phh | but there is a DSP we can access |
| 19:24.27 | ShadowPhoenix | at least it's not that crappy SGX :-) |
| 19:24.33 | phh | I'd guess android drivers might work, but I have some userland problems. |
| 19:25.09 | *** join/#htc-linux toi (n=toi@d54C2A96D.access.telenet.be) |
| 19:25.27 | ShadowPhoenix | phh: do we have specs for the dsp? also what do you mean by 3D? |
| 19:25.42 | phh | we have no spec at all. |
| 19:25.50 | phh | and with 3D I mean.... well 3D ... |
| 19:25.59 | phh | hardware OpenGL ES implementation |
| 19:26.10 | ShadowPhoenix | is there a chip that does it? |
| 19:26.19 | phh | bah the MSM chip |
| 19:26.23 | phh | the MSM chip does everything. |
| 19:26.33 | phh | but wifi/BT/FM |
| 19:28.11 | ShadowPhoenix | hmm |
| 19:29.27 | phh | chamonix: once you've done the nand dump, add mtdparts=msm_nand:0x10000000@0x10000000(boot) to your cmdline, and try reading the mtd/mtd0ro device again (don't overwrite the previous file.), it should be 256MB while the one before should be 512MB |
| 19:29.45 | phh | if so, we might start doing some fun with nand. |
| 19:30.06 | ShadowPhoenix | phh: doesn't the android has the same chip? (msm7201a) |
| 19:30.15 | phh | yes they have |
| 19:31.01 | Camden | Is it just me or does the browser not play animated gifs? |
| 19:31.05 | phh | ShadowPhoenix: I know what you're going to say. but we have a different modem software (there are two processors on the msm chipset, the "application" and the "modem" one), so we have to rewrite many things |
| 19:31.22 | ShadowPhoenix | ah okay |
| 19:31.26 | slight | it it possible to create a dm.txt with haret in the sdcard root? i've got that mini winmo rom that boots straight from haret in root |
| 19:31.50 | phh | slight: add the pwf line just before the boot command |
| 19:32.13 | slight | ah ok, thanks |
| 19:32.16 | phh | slight: I think you should also get the previously booted kernel's messages in /proc/last_kmsg |
| 19:32.28 | phh | theorically. |
| 19:32.32 | slight | great ta |
| 19:32.39 | phh | but this time it doesn't work -_-' |
| 19:32.59 | phh | stinebd: btw, anything new about no_hz ? |
| 19:33.46 | stinebd | phh: instability when booted with usb plugged in (ie usb debugging), no instability when booted without usb plugged (and still no problems when charging as such) |
| 19:34.14 | stinebd | by instability i mean system freezes |
| 19:34.20 | phh | ha. |
| 19:34.26 | stinebd | usually happens within 10 minutes |
| 19:34.42 | stinebd | adb shell dies presumably during idle sleep |
| 19:35.02 | phh | this should be settable. somewhere. |
| 19:35.19 | stinebd | it comes back a few times after waking the screen up, but dies again, then never comes back up and the system freezes shortly after that |
| 19:36.39 | *** join/#htc-linux emwe (n=michael@86.56.50.180) |
| 19:36.50 | stinebd | still no clock issues to speak of |
| 19:37.49 | phh | anyway, if we can't get rid of vsyncs, this is quite useless. |
| 19:39.03 | stinebd | well then you better get rid of vsync |
| 19:39.09 | stinebd | ;) |
| 19:39.16 | phh | lol |
| 19:39.37 | stinebd | it does save some power in reality |
| 19:39.43 | phh | really ? |
| 19:39.48 | Markinus | could maybe someone with a dia or rhod test the new build on glemsom? Is this booting again? |
| 19:39.50 | stinebd | not noticeable though |
| 19:40.01 | stinebd | it saves power when the phone wakes up from deep sleep to check mail or something |
| 19:40.07 | stinebd | and the screen doesn't actually turn on |
| 19:40.13 | stinebd | :) |
| 19:40.27 | phh | really ? |
| 19:40.50 | stinebd | sure, that's why adb shell dies when the screen turns off and it goes in idle sleep |
| 19:41.05 | stinebd | i doubt it's a measurable amount |
| 19:41.25 | ShadowPhoenix | Has anyone tried overclocking the chip? |
| 19:41.26 | phh | I think it might be useful for stuff like ebook reading if we get rid of vsync though |
| 19:41.42 | phh | ShadowPhoenix: no but I can tell you how to do that |
| 19:41.46 | stinebd | it would |
| 19:41.53 | stinebd | and for anything else that doesn't tax the cpu |
| 19:41.55 | *** join/#htc-linux fish1209 (n=fish1209@unaffiliated/fish0912) |
| 19:42.07 | phh | stinebd: I can't see anything but that which fits this :;op |
| 19:42.26 | stinebd | ogling home screen widgets |
| 19:42.33 | phh | ogling ? |
| 19:42.40 | stinebd | looking at |
| 19:42.44 | stinebd | while drooling |
| 19:42.51 | phh | mmmm |
| 19:44.20 | stinebd | oh god 16% battery |
| 19:44.27 | stinebd | where's my usb cable |
| 19:44.31 | phh | :) |
| 19:44.36 | phh | stinebd: announced by android ? |
| 19:44.44 | stinebd | yeah |
| 19:44.49 | stinebd | 22 now |
| 19:44.51 | stinebd | wooo |
| 19:44.51 | phh | :)à|
| 19:50.01 | stinebd | things are much more responsive for me now that handcent sms is gone |
| 19:50.13 | phh | really ? |
| 19:50.13 | phh | m |
| 19:50.47 | stinebd | that thing was very unfriendly apparently |
| 19:50.48 | *** join/#htc-linux onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
| 19:50.59 | phh | I'll have to try. |
| 19:51.28 | chamonix | re |
| 19:52.26 | stinebd | by more responsive, i mean it's back to normal raph-eclair responsiveness. an improvement from painful headache responsiveness |
| 19:52.34 | phh | raph-eclair ? |
| 19:52.39 | *** join/#htc-linux cr2 (n=cr2@ip-109-85-203-178.web.vodafone.de) |
| 19:52.43 | phh | hi cr2 |
| 19:52.52 | stinebd | my phone+android combo |
| 19:53.14 | cr2 | phh: why is your amss is not 5225 ? |
| 19:53.35 | phh | cr2: olinex's desimlocker |
| 19:53.46 | phh | hum not sure it's olinex's |
| 19:53.55 | cr2 | what is your full version ? |
| 19:54.12 | *** join/#htc-linux ICEMANno1 (n=ICEMANno@ip-109-90-220-39.unitymediagroup.de) |
| 19:54.14 | phh | [ 0.268280] AMSS version: 52.26a.25.09H |
| 19:54.26 | ICEMANno1 | hi guys |
| 19:54.27 | ICEMANno1 | Markinus, hows sound progressing? |
| 19:54.30 | cr2 | it is 5225 |
| 19:54.41 | phh | cr2: not with just an atoi |
| 19:54.42 | ICEMANno1 | anything I can support you guys with? |
| 19:54.49 | phh | ICEMANno1: TP2 maybe ? |
| 19:54.54 | cr2 | awk -F. '{print $1,$3}' |
| 19:55.09 | ICEMANno1 | sry, only topaz |
| 19:55.09 | phh | cr2: oh. ok |
| 19:55.26 | phh | cr2: I thaught it was $1$2 |
| 19:55.28 | phh | too logical I guess. |
| 19:55.48 | cr2 | $1*100+$3 |
| 19:56.07 | cr2 | $1*100+$3%100 :) |
| 19:57.10 | chamonix | dd runs |
| 19:57.24 | phh | chamonix: wait a bit :p |
| 19:57.29 | cr2 | ($1%100)*100+$3%100 is even better. if $1 and $3 isnum |
| 19:57.38 | Markinus | <ICEMANno1: I tested much but rhis doesn'T work :-( |
| 19:57.47 | ICEMANno1 | tooo bad :( |
| 19:57.50 | *** join/#htc-linux sse2 (n=sse2@41.104.68.153) |
| 19:58.06 | ICEMANno1 | sounds like you guys are working on GPS atm, right |
| 19:58.10 | chamonix | I've no choice do i? :P what about this newer version of the fastboot ROM.... have I missed sumthin or is it just hidden? |
| 19:58.38 | phh | chamonix: just hidden |
| 19:58.40 | phh | read logs :p |
| 19:59.16 | cr2 | phh: the gps init is finished with smsm_callback_reg(1,9,(*)func()) |
| 19:59.39 | cr2 | phh: the func() is some more of less dummy function |
| 20:00.22 | cr2 | i've looked for other smsm_cb_reg invocations, and found only one: (1,1,func1) |
| 20:00.36 | cr2 | it is smd_cb_reg |
| 20:00.50 | cr2 | so, what may be 9 ? |
| 20:01.06 | cr2 | related to smsm |
| 20:02.59 | phh | can someone check if http://husson.hd.free.fr/libhtcgeneric-ril.so crash? |
| 20:03.26 | phh | cr2: smsm callback ? |
| 20:03.41 | chamonix | -rwxrwxrwx 1 0 0 536870912 Jan 12 13:07 dump-nand |
| 20:03.46 | cr2 | phh: yes |
| 20:03.57 | AstainHellbring | hey cr2 how goes it? |
| 20:03.59 | phh | chamonix: 512MB ROM then |
| 20:04.02 | cr2 | Markinus: why do you register the PDAPI CB twice ? |
| 20:04.24 | cr2 | AstainHellbring: want a nexus |
| 20:04.46 | AstainHellbring | do I want a nexus or you want a nexus? |
| 20:04.53 | phh | he want. |
| 20:04.56 | phh | s |
| 20:04.58 | AstainHellbring | ic |
| 20:06.22 | *** join/#htc-linux kri5 (n=kri5@cowdy.vlmc.org) |
| 20:07.08 | Boydell | who doesn't want a nexus? they dont offer them here in canada though :( |
| 20:07.40 | cr2 | phh: the get_position is =b on 6125 ? |
| 20:07.50 | cr2 | Boydell: buy it over the border |
| 20:08.07 | phh | cr2: yup |
| 20:08.10 | AstainHellbring | Boydell send me $ I'll buy and ship to you |
| 20:08.21 | Boydell | I could, but, I'm not sure if it will work on the telus network |
| 20:08.23 | cr2 | phh: a+1. ok |
| 20:08.34 | phh | uh ? why a+1 ? |
| 20:08.43 | cr2 | Boydell: if it will not, send it to me :) |
| 20:08.44 | Boydell | even if they have the HSPA+ network now...(sim card too, finally) |
| 20:08.45 | phh | it's c-1 if you refer to 5200 |
| 20:08.51 | cr2 | phh: err |
| 20:08.56 | cr2 | yes |
| 20:09.25 | AstainHellbring | Boydell whats the freqs for telus network> |
| 20:09.29 | Boydell | lol, well, I'm on my third raph800, and my warrenty is up, so if it breaks again, a nexus one may be in order :) |
| 20:09.45 | Boydell | umm |
| 20:09.54 | Boydell | one sec, I'm not 100% sure |
| 20:09.59 | cr2 | phh: he gets a reply to get_position. =1 |
| 20:10.07 | cr2 | then comes crash |
| 20:10.46 | Boydell | AstainHellbring: you work for google or something? |
| 20:11.05 | phh | cr2: maybe ARM0 expects for a specific answer we don't give him ? |
| 20:11.10 | phh | ARM9* |
| 20:11.46 | Boydell | telus calls their new network 3G+ actually |
| 20:12.02 | chamonix | dumping 2nd time |
| 20:12.14 | phh | chamonix: with cmdline ? |
| 20:12.19 | chamonix | yes |
| 20:12.43 | cr2 | phh: nothing in the wince rpc logs |
| 20:12.58 | cr2 | phh: it may be some smd "answer" |
| 20:13.05 | phh | cr2: logs = dmesg, or RPC log ? |
| 20:13.08 | Markinus | cr2: why twice? In the gps file this is one time ?!? Sorry, but where you see that? |
| 20:13.08 | phh | s/log/memory |
| 20:13.18 | Boydell | AstainHellbring: Runs on 1900/850 MHz frequency bands and uses standard 3GPP SIM cards is what i get from the telus website |
| 20:13.34 | cr2 | phh: so the get_position response is failure |
| 20:14.03 | cr2 | don't know what it means. maybe just the fix unavailable. still it's strange |
| 20:14.15 | AstainHellbring | Boydell I am on ATT yah those freqs wont work for nexus |
| 20:14.16 | AstainHellbring | sorry |
| 20:14.28 | cr2 | i would extect the call succeed, but the missing fix information in the cb message |
| 20:15.07 | Boydell | AstainHellbring: Yah see I wasn't sure. Thanks. |
| 20:15.13 | AstainHellbring | welcome |
| 20:15.16 | cr2 | Markinus: sorrry. it's 5d, not 5b |
| 20:15.21 | AstainHellbring | Boydell heard anything on hd2 release date for telus? |
| 20:15.46 | Boydell | nope, telus always releases things super late |
| 20:16.18 | AstainHellbring | lame |
| 20:16.32 | cr2 | phh: rpc fifo smem dump |
| 20:16.42 | Markinus | cr2: nop ;-) |
| 20:16.50 | phh | cr2: uh, wince sends nothing back to the rpc callback ? |
| 20:17.07 | cr2 | phh: it sends error |
| 20:17.14 | Boydell | I know, they JUST got the Hero, but I dont really think its specs are all that great, which is why im sticking by porting it to my TP |
| 20:17.21 | cr2 | phh: and then the messages to CB |
| 20:17.25 | c2d | Markinus: new kernel on glemsom boots again on rhod |
| 20:17.26 | phh | cr2: but maybe it's not formated the same way as we do ? |
| 20:17.39 | phh | cr2: are we sure that arm9 is resetted by get_position in wince ? |
| 20:17.59 | Markinus | c2d: ahh, thx! Very good! ;-) |
| 20:17.59 | cr2 | phh: noot sure, neet to check the wince dmesg |
| 20:18.18 | cr2 | the rhod kernel needs a lot of fixes. |
| 20:18.36 | cr2 | Markinus: you have at least 2 strange gpio entries in *topaz.h |
| 20:19.03 | cr2 | NetRipper: ping |
| 20:19.08 | AstainHellbring | yah Boydell good call the nice thing for you atleast is that any ATT phone and any rogers phone will work for you as well |
| 20:19.40 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 20:20.03 | Markinus | cr2: which do you mean? |
| 20:20.07 | Boydell | Really? Didn't really know that, but meh, guess if I want to switch to a SIM phone I have to check the frequencies the phone uses... |
| 20:20.46 | AstainHellbring | yah Boydell ATT and rogers are all on 3g at 850/1900 which is same as their stuff |
| 20:20.49 | c2d | any idea why screen is red after wakeup on rhod? |
| 20:21.07 | phh | c2d: wrong mtype |
| 20:21.10 | ICEMANno1 | better than pink |
| 20:21.23 | c2d | :D |
| 20:22.04 | cr2 | #define TOPA100_USB_AC_PWR 1 |
| 20:22.19 | cr2 | #define TOPA100_BAT_IRQ 28 |
| 20:22.46 | chamonix | it froze..... maybe SD full, retesting with more free space |
| 20:23.35 | cr2 | phh: so arm9 did not crash, but responded with an error to the get_position call |
| 20:23.46 | cr2 | and only then crashed. |
| 20:23.52 | phh | ok |
| 20:24.13 | cr2 | probably we didn't setup something else, or are not supposed to send this call at this moment |
| 20:24.21 | Markinus | cr2: ohh, yes .. . strange . .. hmmm |
| 20:24.33 | phh | cr2: even android doesn't know when to send this call ? :p |
| 20:24.35 | cr2 | phh: i think that some other calls are commented out ? |
| 20:24.42 | Markinus | how is this comming in . . . hmmm, I will test it and change |
| 20:25.06 | cr2 | phh: android uses different amss. and pdsm_client_init(1) and not pdsm_client_init(2) |
| 20:25.13 | Markinus | cr2: thx! |
| 20:25.13 | phh | right. |
| 20:26.04 | cr2 | phh: fixed the mclk already ? |
| 20:26.09 | phh | cr2: which mclk ? |
| 20:26.15 | cr2 | phh: cam |
| 20:26.17 | phh | yes |
| 20:26.26 | phh | it didn't change anything to trout's settings |
| 20:26.48 | cr2 | ? |
| 20:27.08 | phh | the 1c5 and 185 (or something like that.) settings I had before |
| 20:27.14 | phh | they make the same result as 1c4/5 |
| 20:27.22 | cr2 | it's only the alt |
| 20:27.28 | cr2 | i mean the clocks |
| 20:27.37 | phh | it should work |
| 20:27.59 | cr2 | does the cam work ? |
| 20:28.36 | phh | it seems not |
| 20:28.43 | phh | but no error, so might be android fault |
| 20:28.54 | phh | and I don't know how to play with v4l either |
| 20:29.06 | cr2 | ok |
| 20:29.52 | *** join/#htc-linux Billyonthemounta (n=Miranda@stiitcsc412.epfl.ch) |
| 20:30.09 | phh | I don't even know if v4l driver is supposed to work actually |
| 20:31.09 | cr2 | phh: have you changed the hard reset function ? |
| 20:31.48 | cr2 | Markinus: will you add the panel detection code for topa ? |
| 20:32.10 | phh | see http://gitorious.org/linux-on-qualcomm-s-msm/linux-msm/commit/69cc611a9bec67b47abdf92eee2548a071976546 |
| 20:32.20 | phh | (yes I know, it's dirty, no need to tell me.) |
| 20:32.31 | *** join/#htc-linux yoyey (n=yoann@78.242.110.43) |
| 20:35.06 | cr2 | printk("DEX IRQ=%x\n", readl(MSM_SHARED_RAM_BASE+0xfc138)); |
| 20:35.16 | cr2 | i think it was 128 ? |
| 20:35.33 | phh | I didn't commit it sorry |
| 20:36.29 | phh | for set_clock, I write md reg, and then |
| 20:36.31 | phh | <PROTECTED> |
| 20:36.31 | phh | <PROTECTED> |
| 20:36.31 | phh | <PROTECTED> |
| 20:36.57 | phh | I don't remember where I got this 0x7e00 though. |
| 20:37.03 | cr2 | we need to revisit the clk and vreg api |
| 20:37.11 | *** join/#htc-linux MrPippy (n=pip@adsl-75-37-167-3.dsl.sndg02.sbcglobal.net) |
| 20:37.17 | cr2 | they enable the clock, and then set the frequency ? |
| 20:38.52 | phh | I don't see any clock enabling oO |
| 20:39.28 | cr2 | enabled at init |
| 20:39.45 | cr2 | i think they mean a different thing than we. |
| 20:41.40 | *** join/#htc-linux mickey|sofa (n=M@e180153072.adsl.alicedsl.de) |
| 20:41.41 | *** join/#htc-linux camden (n=camden@ancnat2.apto.aptalaska.net) |
| 20:41.59 | camden | does anybody know of a sms program for android that does not do threaded sms? |
| 20:42.05 | Markinus | cr2: No, I startet with this, how can I dump the values behind 0x39 and 0x3a? WIth which function? |
| 20:42.45 | camden | I get tons of alerts from work as text messages, and each alert comes from a new 'number' (1010100432, 1010100433, etc) |
| 20:43.08 | chamonix | phh: 256.0M dump-nand2 |
| 20:43.15 | phh | chamonix: alright |
| 20:43.30 | phh | chamonix: is there a mkfs.yaffs2 command ? |
| 20:43.33 | camden | so rather than look at each alert as a conversation I'd like a flat list of my texts. |
| 20:43.53 | phh | cr2: there is nothing important in the upper 256MB of the nand btw ? |
| 20:44.25 | chamonix | phh: no I don't have that |
| 20:44.30 | cr2 | phh: imei and some hw ids probably |
| 20:44.49 | cr2 | Markinus: just read the gpio value. |
| 20:45.03 | cr2 | Markinus: if it's 1 or 0 |
| 20:45.13 | Markinus | both 0 |
| 20:45.26 | cr2 | 00 - auo |
| 20:45.37 | phh | cr2: uh ? imei in nand ? |
| 20:45.42 | phh | in the *end* of the nand ? |
| 20:45.43 | cr2 | 01 hitachi |
| 20:45.47 | Markinus | ahhh |
| 20:45.53 | cr2 | 10 toppoly |
| 20:45.58 | cr2 | 11 debug |
| 20:46.05 | cr2 | there is also a weird case |
| 20:46.26 | cr2 | read_mddi(4) & 0xffff = 0x48 |
| 20:47.05 | cr2 | then it's toppoly+epson. but i doubt that it happens in real life |
| 20:47.42 | cr2 | phh: in te first 36MB |
| 20:47.52 | phh | cr2: so the upper 256MB is fine ? |
| 20:48.06 | phh | safe i mean |
| 20:48.28 | cr2 | yes. you are free to rewrite the wince things |
| 20:48.35 | chamonix | wtf is overwriting my resolv.conf? |
| 20:48.46 | phh | chamonix: resolv.conf. in android ? |
| 20:48.51 | Markinus | cr2: I made some code in the Panelfile for backlight controll ( i2c ) is this working with all panels? |
| 20:48.52 | phh | chamonix: anyway, write it in /init.etc |
| 20:48.54 | phh | not /etc |
| 20:48.55 | chamonix | lol, no on my desktop :) |
| 20:49.15 | Markinus | cr2: or only with my? |
| 20:49.23 | Markinus | (auo) |
| 20:49.26 | phh | chamonix: beloved networkmanager ? :p |
| 20:49.54 | chamonix | well, it's supposed to be shut forever but I have some gnome part still running :-/ |
| 20:50.10 | cr2 | Markinus: with all. but all we have seen are auo |
| 20:50.42 | Markinus | ok |
| 20:50.46 | cr2 | Markinus: bkl on rhod is more complex, so you need to create separate files for rhod |
| 20:50.55 | phh | chamonix: you'll have to cross-compile some mtd tools and/or yaffs2 tools |
| 20:51.10 | cr2 | Markinus: also for gpios, panel, wifi , bt |
| 20:51.35 | phh | chamonix: if you don't know how to do that I can |
| 20:51.42 | chamonix | chmod -w /etc/resolv.conf, we'll see how the whatever daemon likes that :) |
| 20:52.01 | cr2 | phh: i'll try to dump the cam clock values, and tvout clock values. |
| 20:52.25 | phh | chamonix: but now you can try doing whatever you want on /dev/mtd/*, it should be safe :) |
| 20:52.33 | chamonix | phh: well I never compiled anything else than kernels with the xcompiler but I'll try to get along |
| 20:52.48 | Markinus | I cases already some code between them, like BT . . the Topaz BT vreg disabled the the screen on Rhod. . . |
| 20:52.51 | phh | chamonix: after every reboot, check in /proc/mtd the size, it should be 0x100000 (and some 0 after that), if it's 0x2000 warning you have the whole nand access. don't use it. |
| 20:53.46 | phh | chamonix: hum first thing, do dd if=/dev/zero of=/dev/mtd/mtd0 bs=8192 count=1k, reboot to wince and see if it breaks anything |
| 20:53.49 | phh | then reboot back to linux |
| 20:53.58 | phh | and dump first 8MB of mtd0 to see if it's) 0 |
| 20:54.39 | Markinus | cr2: I have no ideas more for sound, I don't know what I could test as next . .so I do now the other thinks . . |
| 20:55.13 | cr2 | Markinus: ok |
| 20:55.18 | chamonix | phh: I don't have much wince anymore with lightnhb2 do i? |
| 20:55.30 | phh | chamonix: not much, but it can still break |
| 20:56.04 | chamonix | ok so with break anything you basically mean boot, click around and if it doesn't hang/reboot it's fine? |
| 20:56.13 | phh | yes |
| 20:56.27 | chamonix | kk, I like that kind of functional testing |
| 20:56.32 | stinebd | heh |
| 20:56.36 | phh | chamonix: if wince crashes, you can flash it back, start the phone with volume down key |
| 20:56.50 | stinebd | it's sometimes hard to tell if it's linux's fault or wince's ;) |
| 20:57.11 | chamonix | k, I found lightnhb3 so I'll do that anyway, at latests before going to sleep |
| 20:57.34 | phh | chamonix: ok, with lightnhb3 you won't have any risk of wince crash with writing there |
| 20:57.43 | phh | chamonix: but really, at every time you write, double check you have correct mtd |
| 20:58.04 | phh | if it's the full nand and that you write on it, don't reboot, but write back your previous nand-dump |
| 20:58.07 | phh | but don't write on it. |
| 20:58.08 | chamonix | I have a basic question tho |
| 20:58.41 | chamonix | what is the purpose of all that? I mean when would I feel the need to do that writing except if it's for testing |
| 20:58.53 | phh | chamonix: "flashing" android |
| 20:59.17 | chamonix | see that I understand :) |
| 21:00.47 | camden | I would totally flash android in it's current state. |
| 21:00.55 | *** join/#htc-linux ulaas (n=ulaas@88.253.19.100) |
| 21:01.00 | Markinus | cr2: we have this arrors on topaz too, there are comming after start . .do you have a Idea what this could be? rpcrouter or rpctask . .http://pastebin.com/m50a6a1e3 |
| 21:01.02 | camden | I've used less useful windows roms. |
| 21:01.32 | Markinus | rpcrouter and rpctask do this errors . . |
| 21:02.03 | Markinus | cr2: a rpccall what is waiting, and nothing is comming maybe??? |
| 21:03.27 | cr2 | Markinus: arm9 is probably unhappy about the reinit, and takes some time |
| 21:03.37 | cr2 | to respond |
| 21:05.00 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 21:05.08 | Markinus | cr2: hmm, can we correct this? This is comming often . . |
| 21:05.32 | Markinus | or can we ignore this? |
| 21:05.51 | chamonix | phh: ok I did dd if=/dev/zero of=/dev/mtd/mtd0 bs=8192 count=1k, rebooted and the menu was still there and reactive, now I'm booting back to android |
| 21:06.01 | cr2 | Markinus: we need some better research how to reinit rpc |
| 21:06.47 | cr2 | phh: can we send softreset to arm9 at boot ? |
| 21:07.01 | phh | sounds like a good idea |
| 21:07.17 | phh | and copying vogue's init code got dex startup working |
| 21:07.36 | cr2 | the current rpc init is a bit strange |
| 21:08.02 | cr2 | vogue has amss4xxx ? |
| 21:08.24 | cr2 | do we have some smem dump from vogue/kaiser et al. ? |
| 21:09.05 | phh | don't know |
| 21:09.07 | chamonix | <phh> and dump first 8MB of mtd0 to see if it's) 0 <-- that would be dd if=/dev/mtd0 of=/sdcard/dump-nand8Mb bs=8192 count=8M right? |
| 21:09.14 | cr2 | Markinus: btw, how do you pick the wifi nvram data ? |
| 21:09.21 | phh | chamonix: count=1k |
| 21:09.27 | phh | chamonix: total bytes = bs*count |
| 21:09.46 | chamonix | k |
| 21:10.09 | Markinus | do you meen the calibration file? |
| 21:10.15 | Markinus | like wiki . . |
| 21:11.45 | phh | cr2: same for everyone :D |
| 21:11.51 | Markinus | the sequence is 3 times there, it was the second or third .. I'm not sure .. |
| 21:11.56 | cr2 | ok. do you have the gsensor cal data ? |
| 21:12.15 | cr2 | Markinus: 2 times. and they are identical |
| 21:13.00 | Markinus | my hex editor found it 3 times! one different and 2 almost identical :-) |
| 21:13.15 | cr2 | ok, it's some saved copy |
| 21:13.23 | Markinus | cr2: no, I no looked for this till now . . |
| 21:13.30 | cr2 | don't know what do they save |
| 21:14.19 | Markinus | cr2: where can I find it? is this in the wiki too? gsensor cal data? |
| 21:17.03 | cr2 | Markinus: it's at the end of CONFIG 0x400 block |
| 21:17.55 | Markinus | phh: for the gsensor, there is a test suite or? some software that you posted here bevor some days. . is this closed source or do you have sources for this? |
| 21:18.03 | Markinus | cr2: ok, I will on it. . |
| 21:18.14 | phh | I don't remember which one i gave you |
| 21:19.07 | phh | but I have some. |
| 21:20.21 | Markinus | can you give me some of them? So a can take a look on it as next . . |
| 21:20.38 | chamonix | phh: ok the 8M dmp is 0x00 all over |
| 21:21.20 | phh | chamonix: cool |
| 21:22.10 | phh | chamonix: now, rebuild the kernel with yaffs2, mtdchar and mtdblock, cross-build mkfs.yaffs2 |
| 21:22.12 | phh | and have fun :p |
| 21:22.42 | chamonix | lol |
| 21:22.58 | cr2 | and cross the fingers |
| 21:23.05 | phh | cr2: why ? |
| 21:23.10 | phh | any reason it doesn't work with yaffs2 ? |
| 21:23.26 | cr2 | :) |
| 21:23.33 | phh | it won't work* |
| 21:24.01 | chamonix | err, I guess it will take me the whole week to fulfill that requirement -> now, rebuild the kernel with yaffs2, mtdchar and mtdblock, cross-build mkfs.yaffs2 :-D |
| 21:24.13 | phh | chamonix: why ? |
| 21:24.34 | cr2 | phh: can you access the htc-linux wiki ? |
| 21:24.45 | chamonix | because I understand the words but still have to understand the semantics of that phrase :P |
| 21:24.46 | phh | cr2: yes why ? |
| 21:24.58 | cr2 | i can't |
| 21:25.01 | phh | chamonix: ok I'll do it. |
| 21:25.05 | phh | cr2: read or write ? |
| 21:25.16 | chamonix | hey, I didn't say I give uo did i? |
| 21:25.26 | chamonix | s/uo/up/ |
| 21:25.50 | leviathan | pershoot: leviathan-incoming is thought for using it with GNU Linux |
| 21:26.05 | cr2 | phh: both |
| 21:26.06 | phh | chamonix: I'll build the kernel and mkfs.yaffs2 :p |
| 21:26.10 | phh | cr2: read works fine here |
| 21:26.10 | leviathan | pershoot: use usb ethernet gadget |
| 21:26.18 | cr2 | weird |
| 21:26.28 | chamonix | lol |
| 21:27.06 | chamonix | phh: I you give me a few hints and let me ask n00b questions I can give it a try... I may be old but still am able to learn :P |
| 21:28.37 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 21:28.39 | camden | that's the spirit |
| 21:29.04 | phh | chamonix: http://husson.hd.free.fr/msm-nand-config |
| 21:30.41 | chamonix | ty :) |
| 21:31.19 | cr2 | no cam 0001fff7 fff8005f |
| 21:31.32 | cr2 | cam 0001fff7 fff86b59 |
| 21:32.03 | cr2 | vga cam 0001fff7 fff86b59 |
| 21:32.45 | cr2 | it was vfe |
| 21:32.50 | cr2 | now mdc |
| 21:32.55 | cr2 | no cam 00000001 |
| 21:33.08 | cr2 | cam 00000a01 |
| 21:33.33 | cr2 | phh: |0xa00 and &~0xa00 |
| 21:35.23 | phh | hum I have a02 instead of a01 |
| 21:38.50 | cr2 | phh: where are the tv regs ? i don't see wiki page |
| 21:39.15 | phh | tv clock ? |
| 21:39.39 | cr2 | tv_enc_clk |
| 21:39.47 | phh | MSM7500_Core.h ? :p |
| 21:39.59 | cr2 | ok |
| 21:40.02 | *** join/#htc-linux Squarc1 (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 21:41.14 | *** join/#htc-linux MrPippy_ (n=pip@adsl-75-37-167-3.dsl.sndg02.sbcglobal.net) |
| 21:41.36 | cr2 | tv_md_reg; // offset 0xC8 |
| 21:42.04 | cr2 | with 00e1f7ff f8e00044 |
| 21:42.32 | cr2 | hm. always the same |
| 21:43.01 | cr2 | MD is M ~N for clocks |
| 21:44.03 | cr2 | hm. too much |
| 21:44.04 | cr2 | 4 is pll0 |
| 21:45.55 | phh | chamonix: no nandwrite tool ? |
| 21:45.56 | phh | or nand* ? |
| 21:47.48 | cr2 | was off |
| 21:47.51 | cr2 | a86000c8 | 00e1f7ff f8e01b44 |
| 21:48.03 | cr2 | strange, but better :) |
| 21:48.56 | phh | chamonix: http://husson.hd.free.fr/mtd-utils.tar.bz2 |
| 21:49.30 | phh | chamonix: hum no there is nothing interesting in it actually. |
| 21:49.46 | cr2 | awk '{print 245760000*0xe1/0x800}' |
| 21:49.49 | cr2 | 27000000 |
| 21:49.50 | cr2 | phh: cool |
| 21:50.05 | phh | chamonix: try running flash_erase on the mtd, and then mount the mtd as yaffs |
| 21:50.09 | phh | yaffs2* |
| 21:50.17 | phh | cr2: 27MHz clock ? |
| 21:50.23 | cr2 | standard 27MHz tv clock. what i have expected. |
| 21:51.03 | cr2 | phh: you can add a new line for md/ns |
| 21:51.16 | cr2 | phh: do you set the usb clock too ? |
| 21:51.24 | phh | I tried |
| 21:51.26 | phh | but it didn't seem to work |
| 21:51.44 | phh | chamonix: |
| 21:51.46 | cr2 | i think i-'ve calculated it once. |
| 21:51.46 | phh | flash_unlock /dev/mtdN |
| 21:51.46 | phh | flash_eraseall /dev/mtdN |
| 21:51.46 | phh | mount -t FSTYPE /dev/mtdblockN /mnt |
| 21:51.51 | chamonix | phh: not so fast, I'm still struggling with make[1]: *** No rule to make target :) |
| 21:51.56 | cr2 | phh: which location ? |
| 21:52.18 | phh | chamonix: arf. |
| 21:52.26 | cr2 | <PROTECTED> |
| 21:52.42 | phh | hum I don't remember |
| 21:52.59 | cr2 | phh: a86002bc | 000500df 00e40b49 |
| 21:53.03 | phh | 0xe8/0x2bc+4/idx=25 I think |
| 21:53.33 | cr2 | usb_md_reg; // offset 0xE4 |
| 21:53.45 | phh | cr2: remember, our offsets are on ns_reg |
| 21:53.59 | cr2 | a86000e4 | 000100fb 00fc1b59 |
| 21:54.03 | phh | the h in usbh is for highspeed or host you think ? |
| 21:54.04 | cr2 | it's for dumping |
| 21:54.18 | cr2 | host/otg |
| 21:54.21 | phh | ok |
| 21:54.35 | phh | so idx=25 + offset=e8 should be enough ? |
| 21:54.36 | cr2 | i think we must get 64 and 48MHz |
| 21:54.47 | cr2 | idx25 is for host ? |
| 21:54.55 | phh | for slave |
| 21:54.56 | cr2 | host pclk ? |
| 21:55.04 | phh | I don't know if 25 is host or slave actually |
| 21:55.08 | cr2 | pclk is not clk |
| 21:55.23 | phh | but msm_hsusb driver refers to pclk & clk |
| 21:56.13 | cr2 | <PROTECTED> |
| 21:56.15 | *** join/#htc-linux surge (n=surge@sw.attotech.com) |
| 21:56.40 | cr2 | so it belongs to usbh |
| 21:56.48 | cr2 | clock |
| 21:57.03 | cr2 | wince enables both as you see |
| 21:57.18 | cr2 | what does ehci-msm do ? |
| 21:57.31 | *** part/#htc-linux c2d (n=Mike@port-92-200-124-245.dynamic.qsc.de) |
| 21:57.55 | phh | pclk, or clk and pclk |
| 21:58.11 | phh | usb_hs_clk/usb_hs_pclk |
| 21:58.16 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 21:58.30 | cr2 | hmm |
| 21:58.33 | phh | it depends if it's an "integrated phy" or a "usb phy serial pmic" |
| 22:02.59 | *** join/#htc-linux emwe (n=michael@86.56.50.180) |
| 22:03.33 | NetRipper | cr2, pong |
| 22:05.51 | chamonix | phh: for whatever reason I had to rename the file, compiling now |
| 22:05.57 | phh | "the" file ? |
| 22:06.09 | chamonix | the config |
| 22:06.24 | phh | rename it ?!? |
| 22:06.28 | phh | but you just... use it... no ? |
| 22:06.45 | phh | I mean copy it to .config |
| 22:06.49 | chamonix | well that's what I thought too but make didn't want that |
| 22:07.28 | chamonix | so I renamed the file and changed to make ARCH=arm newfile |
| 22:07.50 | phh | uh ? |
| 22:08.05 | chamonix | exactly |
| 22:08.43 | chamonix | didn't find the target msm-nand-config |
| 22:08.56 | phh | ?!? |
| 22:09.01 | phh | just copy the config file to .config |
| 22:09.03 | phh | and run make as usual |
| 22:09.20 | Markinus | phh: could you give me a gsensor test software? I would test it the next days . . |
| 22:09.59 | chamonix | lol, I always use make ARCH=arm .... to create the config to make sure my chanhes in Kconfig are consistent |
| 22:10.05 | chamonix | changes* |