00:17.12 | *** join/#htc-linux PoohbaLT (n=BlkPoohb@c-76-116-92-18.hsd1.nj.comcast.net) |
00:21.22 | mdrobnak | phh: No idea. But both dzo and cr2 said it. |
00:22.05 | dzo | phh: amss uses the rest. |
00:22.51 | dzo | hi mdrobnak |
00:23.28 | dzo | have you tried booting using only the 2nd bank, i.e. change start of bank1 to 0x20000000 |
00:23.40 | dzo | if that works at least you will get 128M |
00:24.27 | mdrobnak | I thought I did, but I thought I had the same outcome as now..ie no boot. |
00:25.54 | dzo | you would have to change the ram base in haret too. |
00:26.18 | dzo | but you could put all the pmem areas in ebi1 |
00:27.12 | mdrobnak | Ok, let me try something like that. |
00:27.14 | toast_ | dzo: in adb it cant find my device. would u have any ideas |
00:28.03 | *** join/#htc-linux darkstar62 (n=darkstar@97-126-104-157.tukw.qwest.net) |
00:28.29 | mdrobnak | dzo: We were trying to get the FB into SMI, as well. |
00:31.35 | mdrobnak | with FB and GPU0 in SMI, no boot. Trying with a more sane SMI layout. |
00:39.55 | mdrobnak | I don't understand. Even with "sane" layout - it doesn't boot. |
00:44.15 | mdrobnak | wtf, I think there's an error in the Hero source. |
00:44.21 | mdrobnak | I copied it from board-hero.c |
00:44.33 | mdrobnak | mi->nr_banks = 1; |
00:44.33 | mdrobnak | mi->bank[0].start = MSM_LINUX_BASE; |
00:44.33 | mdrobnak | mi->bank[0].node = PHYS_TO_NID(MSM_LINUX_SIZE); |
00:44.33 | mdrobnak | mi->bank[0].size = MSM_LINUX_SIZE; |
00:44.37 | mdrobnak | What's wrong with that blocK? |
00:44.57 | mdrobnak | Why is mi->bank[0].node pointing to the SIZE instead of the BASE? |
00:46.12 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
00:46.49 | mdrobnak | Didn't make a difference. :-( |
00:49.19 | mdrobnak | dzo: No go. |
01:16.37 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
01:33.48 | *** join/#htc-linux ellisway (n=ellis@78-86-162-166.zone2.bethere.co.uk) |
01:44.15 | *** join/#htc-linux ellisway (n=ellis@78-86-162-166.zone2.bethere.co.uk) |
01:50.07 | *** join/#htc-linux ImCoKeMaN (n=imcokema@pool-74-99-153-211.hrbgpa.fios.verizon.net) |
01:54.39 | *** join/#htc-linux Bry8Star_ (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
01:54.58 | *** join/#htc-linux ellisway (n=ellis@78-86-162-166.zone2.bethere.co.uk) |
02:00.49 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) |
02:05.07 | *** join/#htc-linux eway (n=ellis@78-86-162-166.zone2.bethere.co.uk) |
02:14.43 | *** join/#htc-linux Bry8Star (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
02:16.35 | *** join/#htc-linux F22 (n=pcm@c-68-82-52-241.hsd1.nj.comcast.net) |
02:18.01 | *** join/#htc-linux dzo_ (n=dzo@121.98.128.127) |
02:27.23 | toast_ | dzo: can u help me with adb? |
02:39.21 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
02:44.37 | *** join/#htc-linux toast_ (n=quassel@115-106.96-97.tampabay.res.rr.com) |
03:00.47 | *** join/#htc-linux Epsylon3 (i=kvirc@ip-103.net-89-2-83.rev.numericable.fr) |
03:02.37 | *** join/#htc-linux toast (n=quassel@115-106.96-97.tampabay.res.rr.com) |
03:07.04 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
03:36.27 | *** join/#htc-linux ChanServ (ChanServ@services.) |
03:36.27 | *** join/#htc-linux polyrhythmic (n=charles@c-67-171-16-39.hsd1.wa.comcast.net) |
03:36.27 | *** join/#htc-linux chemical_at_work (n=chemical@217.6.162.228) |
03:36.27 | *** join/#htc-linux LittleJ (n=linuz@82.78.185.26) [NETSPLIT VICTIM] |
03:36.27 | *** join/#htc-linux tmzt (n=tmzt@adsl-99-51-211-69.dsl.akrnoh.sbcglobal.net) |
03:36.27 | *** join/#htc-linux kri5 (n=kri5@88.191.95.133) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux NCommander (n=mcasadev@ubuntu/member/ncommander) |
03:36.28 | *** join/#htc-linux Dunedan (n=dunedan@phoenitydawn.de) |
03:36.28 | *** join/#htc-linux nrirclog (n=nrirclog@netripper.com) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Jason8 (i=JayAte@97.107.139.87) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux zz_rosseaux (i=znc@84.19.167.129) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux mdrobnak (n=mdrobnak@pool-96-246-31-220.nycmny.fios.verizon.net) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux NetRipper (n=netrippe@tikkie.net) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux shoragan (n=shoragan@debian/developer/shoragan) |
03:36.28 | *** join/#htc-linux jos (i=Jos@2a02:348:33:584a:0:0:0:1) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Dinde (i=kayser@sur-internet.net) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Funklord (n=cow@c-e1d571d5.014-46-73746f28.cust.bredbandsbolaget.se) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux stefand9 (n=stefand@194.7.153.125) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux astrolite (n=astrolit@c-d7c9e455.023-352-6c6b701.cust.bredbandsbolaget.se) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux tuples (n=Tuple@unaffiliated/tuples) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Ekips (i=spike@unaffiliated/ekips) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Weiss (n=taw27@zazu.bitwiz.org.uk) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Doikor (n=aki@192.58.52.211) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux phh (n=quassel@2a01:e35:2e4b:b2b0:250:8dff:fee1:c793) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux docc (n=docc@static.88-198-83-83.clients.your-server.de) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux toi (n=pleemans@d5153128F.static.telenet.be) |
03:36.28 | *** join/#htc-linux prinex (n=prinex@83.151.21.56) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux nozze (n=nozze@u193-11-162-41.studentnatet.se) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux Kevin2 (n=Kevin2@207-237-194-161.c3-0.avec-ubr2.nyr-avec.ny.cable.rcn.com) [NETSPLIT VICTIM] |
03:36.28 | *** join/#htc-linux toer_ (i=tore@179.81-166-86.customer.lyse.net) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) |
03:36.29 | *** join/#htc-linux Miek (n=mike@unaffiliated/mikechml) |
03:36.29 | *** join/#htc-linux Perkka (n=perkka@ua-83-227-207-92.cust.bredbandsbolaget.se) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux tavelram (n=nope@marle.vat.sgsnet.se) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux pigeon (n=pigeon@eth5284.nsw.adsl.internode.on.net) |
03:36.29 | *** join/#htc-linux dtrack (n=LOL@78-86-59-180.zone2.bethere.co.uk) |
03:36.29 | *** join/#htc-linux tcccp (i=hey@asskicker.hey-ix.net) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux SOG (n=SOG@n219078210212.netvigator.com) |
03:36.29 | *** join/#htc-linux rzk_ (n=rzk@82.146.43.168) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux friehmaen (i=freeman@xers.de) |
03:36.29 | *** join/#htc-linux alphaone (n=alphaone@2001:638:602:af01:0:0:0:1) |
03:36.29 | *** join/#htc-linux prinex_ (n=prinex@m57s22.vlinux.de) |
03:36.29 | *** join/#htc-linux infernix (n=nix@unaffiliated/infernix) |
03:36.29 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) [NETSPLIT VICTIM] |
03:36.29 | *** join/#htc-linux bartman (n=bart@tau.jukie.net) |
03:36.29 | *** join/#htc-linux luke-jr (n=luke-jr@2002:62b3:1d4c:0:20e:a6ff:fec4:4e5d) |
03:36.29 | *** join/#htc-linux flyback (n=yukon@c-24-3-254-46.hsd1.pa.comcast.net) |
03:36.30 | *** join/#htc-linux leviathan (n=quassel@82.192.226.27) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux NexVision (n=a@c-76-109-33-88.hsd1.fl.comcast.net) [NETSPLIT VICTIM] |
03:36.30 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
03:36.30 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux madCoder- (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) |
03:36.30 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux townkitty (n=town@86.127.6.111) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux mpurcell (n=mpurcell@vpn.michaelpurcell.info) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux pronik (n=user@ppp-88-217-116-11.dynamic.mnet-online.de) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux dan-htc-fan (n=none@d75-158-134-38.abhsia.telus.net) |
03:36.30 | *** join/#htc-linux Moobyfr (n=blindaue@ns2.agat.net) |
03:36.30 | *** join/#htc-linux martling (n=martin@the.earth.li) |
03:36.30 | *** join/#htc-linux droid001 (n=g1@p4FDCF654.dip.t-dialin.net) |
03:36.30 | *** join/#htc-linux dilinger (n=dilinger@18.54.1.69) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux luminoso (n=lumos@av-217-129-139-239.netvisao.pt) |
03:36.30 | *** join/#htc-linux LTxda (n=anon@unaffiliated/ltxda) |
03:36.30 | *** join/#htc-linux furtardo (n=mks@nat/yahoo/x-dgpgdddsxrywpjsc) |
03:36.30 | *** join/#htc-linux g55 (n=g55@93.135.194.221) |
03:36.30 | *** join/#htc-linux zack84a2 (n=zack84a@r74-192-0-176.bcstcmta01.clsttx.tl.dh.suddenlink.net) |
03:36.30 | *** join/#htc-linux darkstar62 (n=darkstar@97-126-104-157.tukw.qwest.net) [NETSPLIT VICTIM] |
03:36.30 | *** join/#htc-linux ImCoKeMaN (n=imcokema@pool-74-99-153-211.hrbgpa.fios.verizon.net) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux eway (n=ellis@78-86-162-166.zone2.bethere.co.uk) |
03:36.31 | *** join/#htc-linux F22 (n=pcm@c-68-82-52-241.hsd1.nj.comcast.net) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux Epsylon3 (i=kvirc@ip-103.net-89-2-83.rev.numericable.fr) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux Stskeepz (n=chobits@pc-10-195.skjoldhoej.dk) |
03:36.31 | *** join/#htc-linux tekkdrone (n=tekkdron@72.183.115.231) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux thedicemaster (n=thedicem@j89051.upc-j.chello.nl) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux Salt (n=Salt@vergil01.u.washington.edu) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux jmaurice_ (i=jmaurice@snickers.org) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux Tinyboom (n=nahh@41.80-202-154.nextgentel.com) |
03:36.31 | *** join/#htc-linux Radix_ (i=quasselc@203.161.71.161.static.amnet.net.au) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux sidewalk (i=sidewalk@shell.glassbilen.net) |
03:36.31 | *** join/#htc-linux Goten_ (i=goten@anapnea.net) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux mrmoku|away (n=mrmoku@ppp-93-104-25-2.dynamic.mnet-online.de) |
03:36.31 | *** join/#htc-linux Adrian^L (i=adrian@phalse.2600.COM) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux mickeyl (i=mickey@openmoko/coreteam/mickey) |
03:36.31 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-66-75-215-0.bak.res.rr.com) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux mindphas1 (i=mind@phasr.net) [NETSPLIT VICTIM] |
03:36.31 | *** join/#htc-linux Mooby (n=blindaue@ibis.u-strasbg.fr) [NETSPLIT VICTIM] |
03:36.32 | *** join/#htc-linux UnknownArtists (n=unknown@84.19.199.203) [NETSPLIT VICTIM] |
03:36.32 | *** join/#htc-linux DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
03:36.32 | *** join/#htc-linux W8TVI (n=nnnnnme@71.238.235.30) |
03:36.32 | *** join/#htc-linux Marajin (n=marajin@87-194-102-189.bethere.co.uk) |
03:36.32 | *** join/#htc-linux Battousai (n=bryan@gentoo/developer/battousai) [NETSPLIT VICTIM] |
03:36.32 | *** join/#htc-linux Dindon (i=BOHt@193.27.79.0) [NETSPLIT VICTIM] |
03:36.32 | *** join/#htc-linux thinko (n=jdoe6alp@smaug.rackdragon.com) [NETSPLIT VICTIM] |
03:36.32 | *** join/#htc-linux no2chem (n=no2chem@cpe-76-90-65-27.socal.res.rr.com) [NETSPLIT VICTIM] |
03:36.50 | *** join/#htc-linux Bry8Star (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
03:46.29 | mpurcell | hey guys, where is a default kconfig? |
03:51.13 | *** join/#htc-linux Bry8Star_ (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
03:56.22 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
04:08.31 | *** join/#htc-linux g55 (n=g55@93.135.75.206) |
04:11.17 | *** join/#htc-linux Bry8Star (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
04:20.53 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
04:29.20 | tmzt | mpurcell: ARCH=arm make htcraphael_defconfig |
04:29.35 | tmzt | also, arch/arm/configs |
04:31.41 | *** join/#htc-linux Bry8Star_ (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
04:32.43 | tmzt | toast: killall adbd |
04:32.53 | tmzt | sudo adb start-server |
04:32.56 | tmzt | adb list |
04:33.03 | tmzt | also, paste lsusb -v -v |
04:33.11 | tmzt | (pastebin) |
04:34.26 | tmzt | mdrobnak: done anything with .31? don't see it in gito |
04:34.57 | tekkdrone | lol |
04:35.06 | tekkdrone | tmzt: Problem solver |
04:35.36 | tekkdrone | how's it goin' man, I've been gone a while... |
04:36.38 | tmzt | cr2: it's possible suspend code sets the vector in gpu space after diasabling gpu |
04:39.26 | tmzt | the problem seems to be amss is layout dependent |
04:39.43 | tmzt | just having a valid layout might not be enough |
04:40.11 | tmzt | unless we can find a table in radio.nb that sets this stuff up |
04:40.47 | *** join/#htc-linux thedicemaster2 (n=thedicem@j89051.upc-j.chello.nl) |
04:41.37 | mpurcell | tmzt: yeah just found that in build_kernel.html, thx man. |
04:42.39 | *** join/#htc-linux stickboy (n=anonymou@128.153.210.175) |
04:44.46 | tekkdrone | tmzt did you ever get past the muxing on your Q? |
04:45.30 | tmzt | toa: diam500 is cdma sprint? |
04:45.43 | tmzt | the reasons are probably battery then |
04:45.51 | tmzt | we to fix that |
04:46.17 | tmzt | logcat juts tells you services are failing and it shuts down |
04:46.37 | tmzt | I have raph500, also cdma, but not working on android right now |
04:48.57 | flyback | http://www.youtube.com/watch?v=AyUeqJ7ZSU0 <---- "that'S NOT BULL TENDON" HAHAHAH |
04:50.17 | tmzt | nice 3g info, almost trace level |
04:51.15 | tmzt | phh: you can stop rild-server or something |
04:53.44 | AstainHellbring | sup tmzt |
04:56.51 | tmzt | leds (microp-klt) only locked when charging? |
04:57.35 | tmzt | 04:39 < dzo> mdrobnak raph only has 32M SMI, diam has 64M |
04:57.35 | tmzt | 04:40 < dzo> and only 9M is free on raph. |
04:57.54 | tmzt | and raph800/500 have 64smi 32+9 free? |
04:57.56 | tmzt | dzo:? |
04:59.26 | tmzt | 04:38 < dzo> mdrobnak msm_fb driver needs no fix |
04:59.26 | tmzt | <PROTECTED> |
05:00.41 | tmzt | mdrobnak: can you push a branch of what you have as htc-msm-upstream-2.6.31 on my gito? |
05:03.30 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) [NETSPLIT VICTIM] |
05:03.30 | *** join/#htc-linux F22 (n=pcm@c-68-82-52-241.hsd1.nj.comcast.net) [NETSPLIT VICTIM] |
05:03.30 | *** join/#htc-linux droid001 (n=g1@p4FDCF654.dip.t-dialin.net) |
05:03.32 | *** join/#htc-linux townkitty (n=town@86.127.6.111) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux flyback (n=yukon@c-24-3-254-46.hsd1.pa.comcast.net) |
05:03.32 | *** join/#htc-linux friehmaen (i=freeman@xers.de) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux tcccp (i=hey@asskicker.hey-ix.net) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux nozze (n=nozze@u193-11-162-41.studentnatet.se) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux Kevin2 (n=Kevin2@207-237-194-161.c3-0.avec-ubr2.nyr-avec.ny.cable.rcn.com) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux toer_ (i=tore@179.81-166-86.customer.lyse.net) [NETSPLIT VICTIM] |
05:03.32 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) |
05:03.41 | tmzt | 04:32 < dzo> phh, there is a pcm gpio that needs to be set up for bt audio, but thats different from a2dp i think. |
05:03.41 | tmzt | gpio meaning gpio-func? |
05:03.41 | tmzt | those are just muxed pins, not gpio's |
05:04.14 | tmzt | ad2p code is audioflinger, hsuart on g1 I think |
05:04.30 | tmzt | might be adsp on hero but I haven't looked |
05:05.48 | *** join/#htc-linux goxboxlive (n=jrs@mail2.hjellnesconsult.no) |
05:08.34 | dzo | hi tmzt |
05:09.14 | tmzt | mickeyl: on non-ruim cdma devices (and our amss) sim commands seem to give error |
05:10.30 | tmzt | hi |
05:10.57 | tmzt | what is the situation with smi64 on raph800 and what is this AWAKE state |
05:11.04 | tmzt | just trying to catch up |
05:11.49 | tmzt | tekkdrone: never dumped it, it's on hold waiting for gen2 clarity from ezx and my interest sadly |
05:13.01 | tekkdrone | I know the feeling, my interest has been somewhat renewed in the apache |
05:13.48 | tmzt | well, there's no asic3-mmc so you should be ok with whatever kernel |
05:13.55 | tmzt | talk to ph5 though |
05:14.47 | tmzt | if you want to build a script to dump full mux state from haret that would help both of us |
05:14.54 | *** join/#htc-linux droid0011 (n=g1@p4FDCEAFA.dip.t-dialin.net) |
05:18.53 | tmzt | mickeyl: ERROR I mean |
05:19.16 | tmzt | I can have somebody check raph400 (uim device) soon |
05:19.20 | tmzt | maybe |
05:19.48 | tmzt | dzo: what is the situation with smi64 on raph800 and what is this AWAKE state |
05:19.59 | tmzt | should there be 32+9 available? |
05:20.32 | tmzt | msm-fb AWAKE state |
05:20.49 | dzo | tmzt: yes, there should. starting it awake is the only change necessary to the fb driver. |
05:21.08 | tmzt | on? |
05:21.23 | dzo | on everything i think... |
05:21.48 | tmzt | why is it not done that way on g1? |
05:21.57 | tmzt | hboot leaves it disabled? |
05:22.16 | tmzt | how does the resume vector work? |
05:22.16 | dzo | i guess so. |
05:22.27 | dzo | for power collapse? |
05:22.32 | tmzt | or could htcfb be leaving it awake and we need to suspend it |
05:22.34 | tmzt | yes |
05:22.44 | tmzt | you said there's an ebtry at 0x0 |
05:23.10 | tmzt | the code I was looking at in hero mentioned a vector at 0xe0xxxx something |
05:23.22 | dzo | when it powers up the a11 it jumps to 0 and we put some code there to re init the timeers and gpios etc. |
05:23.47 | tmzt | ebi is perserved? |
05:23.57 | tmzt | is 0x0 in ebi or smi? |
05:24.11 | dzo | yes, only a11 is powered down, 0 is in smi. |
05:24.30 | dzo | and it works for me but not other diam owners. |
05:24.31 | tmzt | any reason why ebi is not disabled? |
05:24.38 | AstainHellbring | hiya dzo how goes it |
05:24.41 | tmzt | just we don't have rainit code for it? |
05:24.50 | tmzt | raminit |
05:25.04 | dzo | memory stays on in a low power mode. |
05:25.36 | tmzt | right, but wouldn't power savings be higher if ebi was off? (future, sorry) |
05:26.08 | dzo | perhaps but i don;t know if thats even possible, anyway the a9 uses most power. |
05:26.25 | tmzt | linux memory hotplug should eventially have the logic/structure for this at some point |
05:26.28 | tmzt | but for now |
05:26.29 | tmzt | ok |
05:26.40 | dzo | and a9 uses ebi too. |
05:26.52 | tmzt | I don't know if mdrobnak tested 31 yet |
05:26.57 | tmzt | oh? for? |
05:27.16 | dzo | a9 uses about 13M of ebi. |
05:27.37 | dzo | and 23M of smi. |
05:27.38 | tmzt | more than gpu and dma areas? |
05:27.51 | dzo | yes. |
05:27.55 | tmzt | I see |
05:27.59 | tmzt | must be why then |
05:28.26 | dzo | on gsm anyway, it doesn't on vogue. i don't know about cdma diams. |
05:28.29 | tmzt | what did disabling memory protection gain? |
05:28.52 | dzo | we need to do that to set up the pc restart vector. |
05:29.00 | dzo | because 0 is protected. |
05:29.03 | tmzt | interesting, my banks are completely wrong |
05:29.04 | tmzt | ah |
05:29.18 | tmzt | because ce uses it's boot code? |
05:29.27 | tmzt | where does reboot reason get stored |
05:29.31 | tmzt | in linux ad ce |
05:30.09 | dzo | don't know, sorry, got to go now, bye. |
05:30.13 | tmzt | ok |
05:30.15 | tmzt | thanks |
05:56.56 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
06:00.36 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
06:13.20 | Epsylon3 | made my first fork :) |
06:13.23 | Epsylon3 | on github |
06:14.10 | Epsylon3 | upgrading busybox :) |
06:22.32 | *** join/#htc-linux kvaster (n=kvaster@212.98.181.84) |
06:24.27 | *** part/#htc-linux droid0011 (n=g1@p4FDCEAFA.dip.t-dialin.net) |
06:27.52 | *** join/#htc-linux droid001 (n=g1@p4FDCEAFA.dip.t-dialin.net) |
06:39.04 | *** join/#htc-linux Bry8Star (n=Bry8Star@adsl-99-40-118-13.dsl.lsan03.sbcglobal.net) |
07:09.30 | *** join/#htc-linux ali1234 (n=al@robotfuzz.co.uk) |
07:11.54 | *** join/#htc-linux b3lsatar (n=b3lsatar@92.80.236.243) |
07:12.07 | *** part/#htc-linux b3lsatar (n=b3lsatar@92.80.236.243) |
07:12.47 | *** join/#htc-linux kiozen (n=oeichler@p5492124F.dip0.t-ipconnect.de) |
07:15.03 | *** join/#htc-linux luc_ (i=c3441fe7@gateway/web/freenode/x-whhuyqbaecevoqre) |
07:16.07 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
07:23.17 | *** join/#htc-linux itchy8me (n=itchy8me@ip80-116-211-87.adsl2.static.versatel.nl) |
07:34.05 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
07:50.14 | *** join/#htc-linux Tulga (n=chatzill@203.91.113.10) |
07:53.21 | *** join/#htc-linux Tulga (n=chatzill@203.91.113.10) |
07:53.29 | Tulga | hello tmzt |
07:53.42 | *** join/#htc-linux itchy8me (n=itchy8me@ip80-116-211-87.adsl2.static.versatel.nl) |
08:07.01 | *** join/#htc-linux phh (n=quassel@4be54-3-82-228-187-43.fbx.proxad.net) |
08:08.17 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
08:10.34 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
08:13.26 | *** join/#htc-linux leobaillard (n=leobaill@leobaillard.org) |
08:15.34 | *** join/#htc-linux Adrian^L (n=adrian@216.66.24.2) |
08:21.39 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
08:26.06 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
08:34.27 | *** join/#htc-linux mickey|office (n=M@dialbs-092-079-168-007.static.arcor-ip.net) |
08:42.14 | tmzt | mdrobnak: if you get that last one, please don't push anything yet |
08:43.44 | *** join/#htc-linux JoshuaL (n=JoshuaL@unaffiliated/joshual) |
08:44.21 | Captnoord | yo tmzt |
08:52.24 | Epsylon3 | ok made my first git |
08:52.25 | Epsylon3 | http://github.com/tpruvot/android-initrd |
08:52.27 | Epsylon3 | :) |
08:52.41 | Epsylon3 | it's a branch from vilord |
08:54.17 | phh | omg you're committing as root ? |
08:54.57 | Epsylon3 | its a vmware |
08:55.44 | Epsylon3 | but added git config after |
08:56.44 | Epsylon3 | erk |
08:56.53 | Epsylon3 | busybox is not up to date |
08:56.59 | Epsylon3 | on git |
08:57.37 | phh | ~seen glemsom |
08:57.38 | apt | glemsom <n=glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk> was last seen on IRC in channel #htc-linux, 1d 14h 14m 56s ago, saying: 'Ok'. |
08:57.41 | phh | groumpf. |
08:57.55 | phh | Epsylon3: why do you need a brand new busybox ? |
08:58.27 | Epsylon3 | the original one as no public bbconfig |
08:58.33 | Epsylon3 | has |
08:58.52 | Epsylon3 | like the kernel /proc/config.gz |
08:59.20 | Epsylon3 | and there was big additions to busybox recently |
08:59.30 | Epsylon3 | like vfat support, squashfs |
08:59.34 | Epsylon3 | lzo |
09:00.23 | phh | why do you want vfat support or squashfs in busybox ... ? |
09:00.55 | phh | unless you want to do some mksquasfs/unsquashfs from your phone |
09:00.58 | Epsylon3 | fsck |
09:01.01 | Epsylon3 | mount |
09:01.03 | Epsylon3 | mkfs |
09:01.14 | phh | mount doesn't need busybox support. |
09:01.25 | phh | and fsck is dangerous. |
09:01.25 | Epsylon3 | and there was many useless things |
09:01.34 | Epsylon3 | like linux64 |
09:01.35 | phh | and mkfs vfat ? you want to erase someones cards ? |
09:01.58 | Epsylon3 | i want to be able to format new one yes ;) |
09:02.20 | phh | but systems are on cards ... |
09:02.23 | Epsylon3 | added commands : http://github.com/tpruvot/android-initrd/commit/85e8ce8bbea82d4576da9c6549d46cddc702b85d |
09:02.24 | phh | you have system with many cards ? |
09:03.15 | Epsylon3 | not the problem |
09:03.27 | Epsylon3 | there was same command for minix before |
09:03.40 | Epsylon3 | i just want to be able to update that |
09:03.50 | Epsylon3 | remove useless commands |
09:03.55 | Epsylon3 | but later |
09:06.33 | Epsylon3 | devmem function could be usefull :) |
09:06.46 | Epsylon3 | read write to physical address |
09:06.48 | phh | just fix the kernel. |
09:07.36 | Epsylon3 | is there a working beep api ? |
09:11.41 | phh | beep... ? |
09:11.46 | phh | like echo -e '\a' ? |
09:12.37 | Epsylon3 | :) |
09:13.28 | Epsylon3 | yea |
09:13.34 | Epsylon3 | but on android |
09:13.37 | Epsylon3 | oups |
09:13.45 | Epsylon3 | on linux / or / android |
09:13.55 | Epsylon3 | on devices... |
09:15.11 | phh | for msm, use playwav2 |
09:15.31 | *** join/#htc-linux kvaster (n=kvaster@93.84.112.80) |
09:16.38 | *** part/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
09:18.59 | *** join/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
09:23.10 | phh | Epsylon3: can you add lsof too ? :D |
09:24.44 | Epsylon3 | euh yea, if available |
09:24.58 | Epsylon3 | i dont see it in config |
09:25.11 | phh | will do without it then |
09:25.38 | phh | aarrrggghhh |
09:25.48 | phh | they broke the current sound api |
09:25.51 | phh | deleted snd_pcm_ctl |
09:26.17 | Epsylon3 | where ? |
09:26.46 | phh | the android build i work on |
09:26.51 | phh | based from hero |
09:26.55 | phh | on* |
09:27.16 | Epsylon3 | k |
09:27.21 | phh | "fix" the kernel or android mmm |
09:27.30 | Epsylon3 | hero is the 1.5r1 ? |
09:28.20 | phh | the build i have is a donut, i don't know if it's native hero or not |
09:28.43 | Epsylon3 | there is a post about lsof |
09:28.44 | Epsylon3 | http://lists.busybox.net/pipermail/busybox/2004-April/045450.html |
09:28.50 | Epsylon3 | but no answer |
09:29.27 | phh | well with /proc/$pid/fd/ and with netstat you can find this i think |
09:29.32 | phh | but not that eays |
09:29.40 | tmzt | hey |
09:29.56 | tmzt | can anyone add consw support to htc-fb-console.c? |
09:30.03 | phh | consw ? |
09:30.12 | tmzt | to make it a proper console |
09:30.16 | tmzt | for debugging |
09:30.21 | tmzt | not just earlycon |
09:30.35 | tmzt | look at fbcon for details |
09:33.28 | tmzt | maybe putc is enough |
09:33.58 | Epsylon3 | ok, pull request sent |
09:34.26 | Epsylon3 | need to go to work :) erf 10:30 am |
09:34.29 | Epsylon3 | 37 |
09:34.46 | Epsylon3 | and bathroom before |
09:34.49 | Epsylon3 | .... |
09:35.02 | phh | work @ 10:30 ? strange |
09:35.28 | tmzt | con-write for ttyN |
09:35.41 | Epsylon3 | yea... |
09:35.49 | Epsylon3 | white rabbit... |
09:38.09 | phh | how useful would be a libhtc_acoustic rewrite ? |
09:38.41 | tmzt | well I can't figure out why htcfb stops working |
09:38.55 | tmzt | it's not consw, it must be that it's not a tty |
09:39.07 | tmzt | but still no can't mount root panic message |
09:39.17 | tmzt | or freeing init memory... |
09:39.26 | tmzt | phh: for alsa? |
09:39.45 | tmzt | I think it would be better to map the values to dapm |
09:39.56 | tmzt | and expose via asoc driver |
09:40.14 | phh | no, just to make AudioHardware android's class and kenrel communicate |
09:40.21 | phh | it's actually almost nothing |
09:40.33 | phh | <PROTECTED> |
09:40.48 | phh | i think we don't need much time to code it :D |
09:42.48 | tmzt | how do I get vsync gpio with haret? |
09:43.14 | tmzt | I see |
09:43.26 | tmzt | how is it different form the g1? |
09:43.38 | phh | msm_pcm_ctl has been merged with msm_pcm_out |
09:43.48 | tmzt | ok |
09:44.00 | tmzt | seems just need to change fd |
09:44.15 | tmzt | but their aocoustic has some extra stuff in it |
09:44.23 | phh | but the access to msm_pcm_ctl was hidden into the libhtc_acoustic |
09:44.23 | tmzt | maybe just symlink? |
09:44.50 | phh | just use G1's libhtc_acoustic. |
09:45.20 | phh | i was thinking building one from scratch would be useful, but it's really just a wrapper to ioctl()... |
09:46.16 | phh | oops... their libhtc_acoustic is backward compatible |
09:46.28 | phh | it just thinks i'm using a hero. |
09:48.16 | *** join/#htc-linux Adrian^L_ (i=adrian@phalse.2600.COM) |
09:48.46 | tmzt | can somebody tell me what the other devices use for vsync |
09:48.50 | tmzt | (from wiki) |
09:48.56 | tmzt | in m-n if possible |
09:50.31 | *** join/#htc-linux leobaillard2 (n=leobaill@82.229.189.93) |
09:50.41 | tmzt | 97? |
09:50.45 | phh | leobaillard2 ? |
09:51.00 | tmzt | I get: |
09:51.08 | tmzt | mddi-epson-probe |
09:51.16 | tmzt | setup-vsync |
09:51.31 | tmzt | XXX: vsync on panel failed |
09:51.39 | tmzt | . |
09:51.42 | leobaillard2 | phh: I'm in class and I didn't disconnect my irc at home :) :-° |
09:51.55 | phh | leobaillard2: that's not serious. |
09:52.55 | leobaillard2 | no it isn't, but that's englaish :) |
09:53.00 | leobaillard2 | english* |
09:53.26 | phh | leobaillard2: just found why sound was not working correctly, quiet easy to fix i think, but will take some time |
10:01.24 | tmzt | okay, so trout uses 97 also |
10:02.30 | tmzt | okay, so 4-2 is 97? |
10:02.37 | tmzt | number is from 1-1? |
10:02.54 | tmzt | then why is request-gpio failing? |
10:03.04 | phh | maybe the gpio is allocated by someone else |
10:06.29 | *** join/#htc-linux Adrian^L_ (i=adrian@216.66.24.2) |
10:10.55 | tmzt | yeah |
10:11.06 | tmzt | looks like both clients are being registered |
10:11.11 | tmzt | but this works on 27 |
10:16.55 | *** join/#htc-linux dcordes (n=dcordes_@unaffiliated/dcordes) |
10:17.05 | *** join/#htc-linux FR^2 (i=frr@frquadrat.de) |
10:17.38 | dcordes | tmzt, how's it going? |
10:21.30 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
10:34.52 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
10:41.58 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
10:46.49 | *** join/#htc-linux JoshuaL (n=JoshuaL@unaffiliated/joshual) |
10:56.32 | *** join/#htc-linux Captnoord (n=Captnoor@145.74.218.167) |
11:07.27 | *** join/#htc-linux dream_kill (n=nospam@92.56.53.50) |
11:09.42 | *** join/#htc-linux kvaster (n=kvaster@93.84.112.80) |
11:13.29 | *** join/#htc-linux DarkMasterHalo (n=DarkMast@modemcable187.118-80-70.mc.videotron.ca) |
11:15.14 | phh | in kernel Kconfig: |
11:15.19 | phh | -config MSM_VREG_SWITCH_INVERTED |
11:15.19 | phh | - bool "Reverse vreg switch polarity" |
11:15.19 | phh | - default n |
11:15.19 | phh | - help |
11:15.19 | phh | - Reverses the enable and disable for vreg switch. |
11:15.23 | phh | i'm wondering how useful this can be. |
11:16.16 | Captnoord | only usefull if you want to keep the design idea of 1 == true |
11:16.34 | Captnoord | electronic design wise its smarter to make stuff be enabled when 0 |
11:17.10 | Captnoord | related to source vs drain circuit design |
11:17.54 | Captnoord | a IC isn't good at supplying a signal... |
11:18.24 | Captnoord | like so |
11:18.25 | Captnoord | http://upload.wikimedia.org/wikipedia/commons/1/12/Switch_Pull_Up_Circuit.png |
11:18.51 | Captnoord | and the switch is a pin of the ic |
11:27.13 | mdrobnak | tmzt: No, I looked at .31, and saw the device structure (device.h) is exactly the same as .32 - ie going to have the same problems with no BUS_SIZE, no bus_id member to the struct...tried changing the init code using vesafb as an example, but couldn't get it to work. Need someone with more experience with device drivers to help us. |
11:54.10 | tmzt | mdrobnak: hey |
11:54.23 | tmzt | what driver? |
11:56.14 | tmzt | busses are handled differently, but I think I hardcoded the one place that was used or something |
11:56.29 | tmzt | I used my 32 mach-msm so didn't see the error again |
11:56.40 | tmzt | mddi seems to be the problem |
11:57.00 | tmzt | something is causeing -38 ENOTSUPP and I can find thatverror anywhere in mddi |
11:57.08 | tmzt | so I think it's the gpio |
11:58.21 | tmzt | mddi-bridge-setup failed with error -38 |
11:59.19 | tmzt | or I'm reading the error wrong because of corruption in the console handling of htcfb |
11:59.27 | tmzt | guess I have to use ramconsole |
12:00.00 | leobaillard | tmzt: btw, I didn't read all the back logs, did you succeed in applying the patches to 2.6.32 and run it ? |
12:00.55 | tmzt | it failed, I thought because of timer.c changes but apparently it's a comination of htc-fb-console not registering a tty and mddi init failing |
12:01.15 | tmzt | I need to check if klt is still working |
12:01.25 | tmzt | if so, linux is probably running fine |
12:01.48 | tmzt | mdrobnak: I left out a few drivers on the 32 tree including mddi |
12:01.57 | tmzt | and microp-keypad |
12:02.35 | tmzt | leobaillard: I'? on 2.6.31 final now, no hacky patches needed for it |
12:02.52 | tmzt | I will push tis later today |
12:02.57 | leobaillard | okay, great :) |
12:03.09 | tmzt | do you have tohiba or epson client? |
12:03.30 | tmzt | mdrobnak: if you can paste your diff to my 32 I could enable raph100 on 31 |
12:03.36 | leobaillard | well...that's a good question :/ |
12:10.22 | tmzt | why does mddi.c test i and then switch to dummy? |
12:20.31 | mdrobnak | tmzt: There's not much to diff.. |
12:20.43 | mdrobnak | But yeah, it's registering stuff that's changed. |
12:21.21 | mdrobnak | Do you want me to commit my changes to .32? |
12:21.59 | mdrobnak | anyway, gotta run. |
12:23.42 | mickey|office | tmzt: ping |
12:36.25 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
12:45.24 | tmzt | mdrobnak: dev-set-name ! |
12:45.40 | tmzt | mickey|office: I can test raph500 a little later |
12:46.18 | mickey|office | tmzt: ok, if you have a chance, could you check what 'AT+WS46?' and 'AT&V' are returning for your cdma device? |
12:47.20 | *** join/#htc-linux itchy8me (n=itchy8me@ip80-116-211-87.adsl2.static.versatel.nl) |
12:50.30 | leobaillard | trop bon l'orientatino ! |
12:50.33 | leobaillard | oops |
12:50.34 | leobaillard | sorry |
13:02.57 | *** join/#htc-linux Gnutoo (n=gnutoo@host93-155-dynamic.51-79-r.retail.telecomitalia.it) |
13:15.14 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
13:17.35 | JoshuaL | anyone knows where to get a clean build of android? i wanna have it as clean as possible to test with the kernel for android |
13:17.59 | phh | build it from android's repo |
13:19.10 | phh | if that's what you call "clean" |
13:19.17 | phh | but android and clean are incompatible |
13:20.03 | JoshuaL | with clean i meant as close to the official release yeah |
13:20.11 | JoshuaL | will try to build from their repo ty |
13:36.36 | Captnoord | lol |
13:41.44 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
13:42.07 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
13:47.36 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
14:25.07 | *** join/#htc-linux stickboy (n=anonymou@128.153.210.175) |
15:11.47 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
15:23.04 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
16:18.29 | *** join/#htc-linux polyrhythmic (n=charles@c-67-171-16-39.hsd1.wa.comcast.net) |
16:25.33 | tmzt | mickey|office: sure |
16:25.55 | tmzt | I'm doing kernel work and I just have to switch to the working 27 to test it |
16:26.00 | tmzt | sorry for the delay |
16:39.58 | *** join/#htc-linux JoshuaL (n=JoshuaL@unaffiliated/joshual) |
16:40.45 | *** join/#htc-linux thedicemaster (n=thedicem@j89051.upc-j.chello.nl) |
16:45.14 | *** join/#htc-linux idkfa (n=sergey@87.228.4.172) |
16:48.55 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
16:51.22 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
16:54.30 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
16:54.36 | *** join/#htc-linux stickboy (n=anonymou@128.153.179.208) |
16:58.18 | *** join/#htc-linux Guillaume_ (n=Guillaum@82.246.132.225) |
16:59.02 | *** join/#htc-linux Squarc (n=Squarc@145.81.0.104) |
17:00.28 | *** join/#htc-linux Spacy213 (n=casper@80.101.159.228) |
17:06.51 | *** join/#htc-linux diogene31 (n=rjk@mur31-2-82-243-122-54.fbx.proxad.net) |
17:10.21 | *** join/#htc-linux g55 (n=g55@93.135.215.60) |
17:12.25 | *** join/#htc-linux Gnutoo (n=gnutoo@host133-133-dynamic.54-79-r.retail.telecomitalia.it) |
17:22.58 | *** join/#htc-linux kiozen (n=kiozen@93.135.193.58) |
17:25.05 | mickey|office | tmzt: no problem, take your time. |
17:25.08 | mickey|office | bbiab |
17:25.49 | *** join/#htc-linux LpBv (n=ed@18.138.0-93.rev.gaoland.net) |
17:26.02 | LpBv | Hi |
17:30.07 | *** join/#htc-linux pleemans (n=toi@d54C2A96D.access.telenet.be) |
17:46.47 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
17:52.01 | *** join/#htc-linux balans (n=BRPOLDB@212-123-149-239.ip.telfort.nl) |
17:52.48 | *** join/#htc-linux m4t (i=matt@theorize.org) |
17:52.58 | *** part/#htc-linux m4t (i=matt@theorize.org) |
18:10.58 | *** join/#htc-linux onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
18:16.21 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
18:21.19 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
18:22.45 | *** join/#htc-linux junalmeida (n=junalmei@201.19.210.208) |
18:24.53 | *** join/#htc-linux Reactor16 (i=Reactor1@93.182.132.141) |
18:25.58 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
18:27.12 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
18:28.07 | *** join/#htc-linux Reactor16 (i=Reactor1@93.182.132.141) |
18:29.38 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
18:36.16 | *** join/#htc-linux [1]Captnoord (n=Captnoor@81.71.164.123) |
18:36.24 | Epsylon3 | so... |
18:36.38 | Epsylon3 | ok, my git pull was accepted :) |
18:42.14 | *** join/#htc-linux tuxhero (n=tuxhero@122.169.149.130) |
18:42.27 | tuxhero | dzo r u there |
18:43.54 | *** join/#htc-linux aqww (n=aqww@78.161.20.227) |
18:44.29 | aqww | hi |
18:44.50 | tmzt | tuxhero: not right now |
18:45.18 | aqww | anybody who knows rom update from internal storage for htc diamond? |
18:45.38 | phh | why from internal storage ? |
18:45.42 | tmzt | rom update? |
18:45.48 | tmzt | ah, you want #xda-devs |
18:45.54 | tuxhero | tmzt which device do u have? |
18:45.58 | tmzt | raph500 |
18:46.03 | tmzt | cdma touch pro verizon |
18:46.06 | aqww | cause cant do from pc. invalid vender error |
18:46.15 | tuxhero | who has diamond? |
18:46.26 | phh | _o/ |
18:46.29 | tmzt | a few users, but they would e hear later |
18:46.29 | aqww | anybody done before? |
18:46.33 | tmzt | ah |
18:47.12 | phh | tuxhero: why ? |
18:47.51 | phh | aqww: maybe check if there is nothing to rom update htc raphael/touch pro from SD, it will be the same thing |
18:48.00 | tuxhero | phh, does diamond LCD and Panel Working correctly? |
18:48.24 | phh | it seems so to me |
18:48.41 | phh | but i'm not totally sure, dmesg seems to mean that it doesn't actually go to sleep |
18:48.49 | tmzt | well, you use spl to do it |
18:49.15 | tmzt | but I don't think there's a way to get nbh onto the storage (which is really sd) without wm working |
18:49.23 | tmzt | so there must be another way to flash |
18:50.08 | aqww | if it is official rom, do i still need hard spl? |
18:50.27 | tmzt | if it's signed? don't think so |
18:50.34 | phh | tmzt: some are |
18:50.49 | aqww | i get usb trigger error on boot screen |
18:54.45 | Epsylon3 | tmzt : for the raph it's raphimg.nbh ? |
18:55.01 | Epsylon3 | to sd rom update ? |
18:55.06 | Epsylon3 | the |
18:55.21 | tmzt | yeah |
18:55.22 | phh | Epsylon3: the "official" android-initrd is made by who ? dzo ? |
18:55.28 | tmzt | and diam diamimg.nbh |
18:55.30 | Epsylon3 | vilord |
18:55.42 | tmzt | right, the git was posted for it yesterday |
18:55.42 | Epsylon3 | from dzo yes i think at beginning |
18:55.46 | Stskeeps | 16 |
18:55.48 | Stskeeps | .. |
18:55.56 | phh | groumpf |
18:56.00 | tpruvot | :) |
18:56.02 | tmzt | hey Sts |
18:56.16 | phh | i had to do some modifications to enable wifi on diam |
18:56.17 | tmzt | working on 2.6.31 for msm, having issues though |
18:56.17 | phh | and i think it might be useful for every board |
18:56.20 | phh | so this need discuss |
18:56.37 | Stskeeps | o tmzt ;) |
18:56.54 | tpruvot | firmware ? |
18:57.04 | phh | tpruvot: kernel modules |
18:57.05 | tpruvot | oh a module ? |
18:57.06 | tpruvot | yea |
18:57.12 | tmzt | and firmware |
18:57.19 | tpruvot | ;) |
18:57.35 | phh | tmzt: firmware is no big deal |
18:57.44 | tmzt | why? |
18:57.57 | phh | because it's included in system most of the time |
18:58.19 | tmzt | ah, for android |
18:58.20 | tmzt | ok |
18:58.36 | phh | yes |
18:58.36 | tpruvot | yes, system/lib |
18:58.41 | phh | hu ? it's in system/etc/firmware |
18:58.51 | tpruvot | the module is not in rootfs |
18:59.10 | phh | that can be fixed easily |
18:59.11 | tpruvot | yes |
18:59.18 | tpruvot | it is but at the wrong place |
18:59.19 | tpruvot | rootfs\initetc\wifi |
18:59.40 | tpruvot | with firmware |
18:59.45 | tpruvot | and loader |
18:59.47 | phh | what i've done is create a modules-$(uname -r).tar.gz in the root of the sdcard |
19:00.04 | tpruvot | its a good thing yes |
19:00.05 | phh | which will be extracted at start into /lib/modules (which has been mount --bind from /data/modules) |
19:01.20 | tpruvot | yup, the lib/modules is usefull for auto loading |
19:01.36 | tpruvot | but you can insmod with the full path |
19:02.25 | tpruvot | but actually, there is only one module for every devices right ? |
19:02.38 | tpruvot | (htc i mean) |
19:03.22 | tmzt | what? |
19:03.43 | tmzt | ah, the non tp2/d2 all use the same tiwilink4 |
19:04.24 | tpruvot | yes, but maybe different firmware |
19:04.27 | tavelram | Ive tried to boot with haret - but without an sd-card, and Ive set initrd |
19:04.42 | tavelram | to root instead of storage card, what else should I do? |
19:04.44 | phh | tpruvot: currently i need rfkill_backport.ko, cfg80211.ko, mac80211.ko, wl1251.ko, wl1251_sdio.ko, xvmalloc.ko and ramzswap.ko :p |
19:04.45 | tmzt | do you have diam? |
19:04.48 | *** join/#htc-linux kiozen (n=kiozen@93.135.193.58) |
19:04.55 | *** join/#htc-linux [1]Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
19:04.58 | tmzt | if not you need sd card for any recent build of android |
19:05.24 | phh | if you have a diam, then consider that internal store is a SD card |
19:05.36 | tpruvot | yea ok, i see |
19:06.04 | tpruvot | i think the initetc/wifi is not the good place |
19:06.44 | tpruvot | also i dont like all init scripts at root |
19:06.53 | tpruvot | they must be in initetc ;) |
19:08.01 | tpruvot | i think lib could be a good place |
19:08.30 | tpruvot | something like lib/extra |
19:08.36 | tpruvot | or lib/wifi |
19:08.59 | tpruvot | for your module family ;) |
19:09.22 | phh | initetc/wifi is not a good place for what ? |
19:09.35 | tpruvot | the wifi files |
19:10.06 | phh | the only files useful for me in it are loadit and wpa_supplicant.Conf |
19:10.10 | phh | and later, unloadit |
19:10.16 | phh | oh. only loadit :D |
19:11.23 | tpruvot | in debian it's /lib/modules/2.6.26-2-686/ |
19:11.30 | tpruvot | for modules |
19:11.33 | phh | not every normal linux distributions |
19:11.36 | tpruvot | something like that could be nice |
19:11.54 | tpruvot | like /lib/modules/kaiser /lib/module/diamond |
19:12.03 | tpruvot | linked to ../*.ko |
19:12.10 | phh | mmm |
19:12.12 | tpruvot | to choose the good one |
19:12.35 | phh | i think the choice should be in init script |
19:12.38 | phh | not in folders |
19:14.29 | tpruvot | but all init.device.rc must be moved |
19:14.35 | tpruvot | maybe conf |
19:14.39 | tpruvot | like the sdcard |
19:14.49 | phh | the first thing to do is factorize i think |
19:14.57 | phh | all files are almost the same but some lines |
19:15.10 | tpruvot | yea i see |
19:16.03 | tpruvot | all deamon stuff yea |
19:16.06 | tpruvot | and boot |
19:16.17 | tpruvot | with default one |
19:16.28 | tpruvot | if file doesnt exists |
19:17.57 | tpruvot | but |
19:18.24 | tpruvot | i dunno what is the init1 binary file |
19:18.37 | phh | it's the init binary from normal android |
19:18.42 | phh | which will read and "exec" the init.rc |
19:19.01 | tpruvot | ok, i see... |
19:21.36 | tpruvot | i need to examine scripts... |
19:21.48 | tpruvot | did you see vilord here ? |
19:22.43 | tpruvot | nick tanguy |
19:23.09 | tpruvot | ermf, need a new nickname; ) |
19:23.14 | tpruvot | official one |
19:24.03 | tpr | :) |
19:24.27 | tpr | trigram |
19:25.48 | *** join/#htc-linux stickboy (n=anonymou@128.153.179.208) |
19:35.07 | tpr | ok...there is already a setting for wifi switch |
19:35.46 | tpr | hmm |
19:35.51 | tpr | weird stuf |
19:36.47 | phh | wifi switch ? |
19:36.47 | tpr | if [ "`grep -c ^wifi /tmp/build.prop`" != "2" ]; then |
19:36.47 | tpr | echo "wifi.interface = tiwlan0" >> /tmp/build.prop |
19:36.47 | tpr | oh ok |
19:36.48 | tpr | echo "wifi.supplicant_scan_interval = 45" >> /tmp/build.prop |
19:36.48 | tpr | no |
19:36.48 | tpr | its not a switch |
19:37.06 | tpr | but the script is weird |
19:37.08 | tpr | sed -i s/^#wifi/wifi/ /tmp/build.prop |
19:37.24 | tpr | oh if it's not commented ! |
19:37.29 | tpr | lol |
19:37.32 | phh | yes it handles both cases |
19:37.51 | phh | anyway, wifi.interface isn't board related, and it's absence doesn't disactive wifi |
19:38.00 | tpr | but if you had another wifi line |
19:38.06 | tpr | the script doesnt work |
19:38.21 | tpr | or remove one |
19:39.33 | phh | the interface can be called tiwlan0 or wlan0 depending on the driver you use ... |
19:39.51 | phh | or you can rename it |
19:41.23 | tpr | yea |
19:41.31 | tpr | bad thing the tiwlan0 |
19:41.51 | tpr | wlanX for every wireless lan : |
19:42.22 | tpr | but |
19:42.28 | phh | why you don't love TI's driver ? :p |
19:42.30 | tpr | if android name it |
19:42.38 | phh | not android |
19:42.39 | tpr | use the name |
19:42.42 | tpr | no ? |
19:42.54 | phh | the tiwlan0 has always been the name for ti driver |
19:43.09 | tpr | yes |
19:43.20 | tpr | advertising |
19:43.20 | phh | i had have a phone for before android even exists, and wireless interface was named tiwlan0 too |
19:43.24 | tpr | ;) |
19:44.08 | tpr | ok, not a problem i think |
19:44.22 | tpr | but maybe for you |
19:44.29 | tpr | if you use the new driver ;) |
19:44.42 | tpr | so must be tiwlan0 too... |
19:44.54 | phh | the "wlan.interface" thing is the easiest problem to solve :p |
19:45.03 | tpr | oh |
19:45.13 | tpr | there is that in android conf ? |
19:45.19 | tpr | ok right, not a problem |
19:45.52 | phh | wifi.interface designates the interface of the wifi interface yes |
19:46.17 | tpr | lol i pasted it without reading ;) |
19:46.23 | phh | lol |
19:47.29 | tpr | etc/init.d ? for init script ? good for you ? |
19:47.50 | phh | i had to rebuild libhardware_legacy.so |
19:47.53 | *** join/#htc-linux [1]Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
19:47.57 | phh | once this is done i can do whatever i want |
19:48.04 | phh | s/rebuild/modify/ |
19:49.57 | *** join/#htc-linux luminoso (n=lumos@av-217-129-139-239.netvisao.pt) |
19:58.03 | mpurcell | hey guys, what is Trout |
19:58.21 | mpurcell | other than a fish. |
19:58.29 | tmzt | htc dream |
19:58.30 | tmzt | g1 |
19:58.30 | mpurcell | commonly used to assault people in IRC chat rooms |
19:58.33 | mpurcell | Ah thx |
20:02.22 | *** join/#htc-linux Guillaume (n=Guillaum@82.246.132.225) |
20:03.45 | tpr | ;) |
20:03.50 | tpr | large big trout |
20:04.04 | tpr | with i slap you |
20:05.19 | mpurcell | lol |
20:06.15 | *** join/#htc-linux Guillaume (n=Guillaum@nsg93-6-82-246-132-225.fbx.proxad.net) |
20:07.32 | *** join/#htc-linux GlemSom (n=glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
20:12.16 | *** join/#htc-linux JoshuaL (n=JoshuaL@unaffiliated/joshual) |
20:32.07 | *** join/#htc-linux g55 (n=g55@93.135.74.29) |
20:38.01 | *** join/#htc-linux Reactor16 (i=Reactor1@93.182.132.89) |
20:45.57 | *** join/#htc-linux Zoolooc (n=lucian@p549573D6.dip.t-dialin.net) |
20:49.43 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
20:58.21 | tpr | ok, will try that... init.cfg and init.etc |
20:58.46 | tpr | just rewrote the rootfs/init script, need to test |
20:59.21 | tpr | and init1 to init.android |
21:02.44 | *** join/#htc-linux pronik` (n=user@ppp-88-217-111-42.dynamic.mnet-online.de) |
21:31.14 | *** join/#htc-linux rayman18 (n=opera@residL-102-227.uc3m.es) |
21:36.27 | *** join/#htc-linux cr2 (n=cr2@ip-109-84-140-118.web.vodafone.de) |
21:38.12 | cr2 | tmzt: topa100 uses tiwlan1251 |
21:38.19 | tmzt | hey |
21:38.22 | tmzt | oh thanks |
21:38.34 | tmzt | npelly said we shouldn't have a problem with dma1 |
21:38.48 | tmzt | you weren't here so I didn't know what the exact issue was |
21:39.14 | tmzt | I'm getting abrt's related to 2.6.31 driver model |
21:39.15 | *** join/#htc-linux |Jason8| (i=JayAte@97.107.139.87) |
21:39.20 | *** join/#htc-linux Spacy213 (n=casper@a80-101-159-228.adsl.xs4all.nl) |
21:39.28 | tmzt | I think I'm going to try to intergrate ours and ca's drivers |
21:39.46 | tmzt | and build a nop wince version that defaults to RUNNING state |
21:39.49 | tmzt | as dzo said |
21:40.50 | tmzt | mpd driver |
21:40.56 | tmzt | msm_fb driver |
21:41.02 | cr2 | what is dma1 ? |
21:41.08 | tmzt | hs_uart |
21:41.11 | tmzt | uartdm |
21:41.39 | cr2 | the fb driver of druidu needs to parse the FB atag |
21:41.43 | tmzt | he seems to be in #android still |
21:41.53 | cr2 | we use uart2dm |
21:41.54 | tmzt | yeah, I'm trying to add tty support to that also |
21:42.18 | cr2 | but i need to patch haret to provide FB atag too |
21:42.20 | tmzt | to keep console until msm_fb is ready to takeover |
21:42.27 | flyback | is about ready to just accept his life is fucked no matter what and just try to sleep most of it off |
21:42.36 | cr2 | ok |
21:43.56 | *** join/#htc-linux pronik`` (n=user@ppp-88-217-99-184.dynamic.mnet-online.de) |
21:44.02 | *** join/#htc-linux gehzumteufel (n=gehzumte@174-127-18-210.static-ip.telepacific.net) |
21:44.53 | gehzumteufel | cr2: so hows the kernel boot status? Still need more debug stuffs? |
21:45.19 | gehzumteufel | On the rhod/topaz |
21:46.31 | cr2 | gehzumteufel: need to check the latest dump |
21:47.00 | cr2 | gehzumteufel: and we need to revise the memory layout |
21:47.45 | phh | cr2: i'd like to get bluetooth fixed, any new idea ? |
21:48.05 | cr2 | phh: put the wince entry back |
21:48.47 | cr2 | phh: it's 1MHz according to my calculation though. don't know how to explain that. |
21:48.55 | phh | do you remember what was it ? |
21:49.38 | phh | ok let's logs then |
21:50.18 | gehzumteufel | Well let me know if there is any testing I can do |
21:50.34 | cr2 | phh: the "requested" value should be 64MHz |
21:50.43 | gehzumteufel | Although I know it is pretty late where you are |
21:51.21 | cr2 | 23:50 |
21:52.54 | cr2 | get "Bad gateway" at xda-dev |
21:53.01 | *** part/#htc-linux rayman18 (n=opera@residL-102-227.uc3m.es) |
22:00.25 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
22:01.02 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
22:01.04 | *** join/#htc-linux leaigor (n=laigor@188.134.16.241) |
22:10.09 | tpr | ok, booting with a clean roots |
22:10.49 | gehzumteufel | What device? |
22:10.55 | tpr | is there a way to get the init console screen stdout/stderr to file ? |
22:11.04 | tpr | whole |
22:11.10 | tpr | no |
22:11.28 | tpr | i clean the kaiser/hero/vogue/diamond etc rootfs |
22:11.38 | gehzumteufel | ahh |
22:12.29 | gehzumteufel | I have a rhodium if there is anything that needs to be tested |
22:13.24 | tpr | yes maybe... dont know this one |
22:13.26 | cr2 | gehzumteufel: hmm. they still provide agps-only data ;) |
22:13.51 | tpr | oh yea |
22:13.52 | cr2 | gehzumteufel: need to find some other way to investigate |
22:13.56 | gehzumteufel | Ahh |
22:13.59 | tpr | i know.. touch pro 2 |
22:14.14 | gehzumteufel | It isn't maybe located at a different address? |
22:14.16 | cr2 | gehzumteufel: i'll fix the known problems first |
22:14.18 | tpr | could be difficult :p |
22:14.29 | cr2 | gehzumteufel: no |
22:15.05 | cr2 | can the topa/rhod .nbh be dissected ? |
22:15.16 | cr2 | last time i've tried it didn't work |
22:15.25 | gehzumteufel | dissected in what way? |
22:15.31 | gehzumteufel | to check the bootloader I assume? |
22:15.42 | cr2 | ->imgfs->files |
22:15.51 | tpr | or not |
22:15.53 | gehzumteufel | from what I know of yes |
22:15.54 | tpr | its a MSM7200A |
22:16.11 | gehzumteufel | the tp2 is an MSM7201A |
22:16.15 | gehzumteufel | At least the US one is |
22:16.16 | tpr | th 1 version is for US |
22:16.18 | cr2 | gehzumteufel: the cpu is not a problem. |
22:16.24 | tpr | the 7200 is other |
22:16.27 | tpr | patent problem |
22:16.30 | gehzumteufel | Yeah |
22:16.33 | gehzumteufel | Stupid shit really |
22:16.57 | cr2 | tpr: i doubt that you can find any difference. |
22:16.58 | tpr | so, same as kaiser, but in 45nm |
22:17.08 | gehzumteufel | Pretty much |
22:17.16 | cr2 | between 7200A and 7201A |
22:17.31 | tpr | yes sure |
22:17.37 | tpr | so, same a raphael |
22:17.46 | gehzumteufel | Yeah |
22:17.48 | tpr | must be compatible |
22:17.55 | gehzumteufel | Nothing the OS would see as a difference |
22:18.01 | gehzumteufel | It still operates the same from an OS aspect |
22:18.24 | gehzumteufel | the hal didn't change |
22:18.41 | tpr | so you can maybe test my rootfs |
22:18.52 | gehzumteufel | if you want |
22:19.02 | tpr | let me add a sh to pause output |
22:19.17 | tpr | in the script... i need to see that too... |
22:19.27 | gehzumteufel | If you could package it for me like cr2 does (takes care of everything) since I don't really know what to add to any text files |
22:19.29 | tpr | here, and i send you the rootfs |
22:19.49 | *** join/#htc-linux ImCoKeMaN_ (n=imcokema@pool-74-99-153-211.hrbgpa.fios.verizon.net) |
22:19.57 | tpr | just place rootfs.img on your sdcard at root |
22:20.06 | tpr | and use same haret |
22:20.08 | tpr | same config |
22:20.24 | gehzumteufel | cr2 just builds a single exe...so I dunno the confix |
22:20.25 | gehzumteufel | config* |
22:20.41 | tpr | cr2 ? |
22:20.46 | tpr | startup.txt ? |
22:21.03 | gehzumteufel | yeah I had nothing but the pwf dump stuff there |
22:21.17 | tpr | rootfs is loaded by the initrd.... then load the system image and data |
22:21.18 | cr2 | phh: GPS: [GPSDriverModemResetCB] Radio Restart: modem is up and running again |
22:21.46 | phh | cr2: what does say get_position ? |
22:21.56 | cr2 | tpr: rootfs is completely irrelevant here. the kernel fails much earlier |
22:22.38 | cr2 | phh: i don't get why/how the modem is resetted here. |
22:22.44 | phh | oh. |
22:23.12 | tpr | ok |
22:23.27 | phh | cr2: do you know how to debug power management ? |
22:23.40 | phh | some device disable power collapsing according to dmesg, but it doesn't say which one |
22:24.17 | tpr | same problem here with config 3 |
22:24.23 | tpr | power= |
22:24.24 | tpr | 3 |
22:24.26 | tpr | oups |
22:24.33 | tpr | works better with 1 |
22:24.35 | phh | pm.sleep_mode you mean ? |
22:24.42 | cr2 | no. |
22:24.43 | tpr | yes sorry |
22:25.02 | tpr | but with 1, i need to push power button to wake up |
22:25.05 | cr2 | i have some problems with the smem layout to solve first |
22:25.08 | tpr | with 3, only a key |
22:25.24 | cr2 | should be amss-dependent too |
22:26.07 | cr2 | phh: can you enable the wince values for 64MHz entry ? |
22:26.18 | phh | cr2: do you remember which one they were ? |
22:26.18 | cr2 | phh: and put it at the end of the list |
22:26.36 | cr2 | phh: the wince block is commented out |
22:26.55 | phh | oops, i haven't seen glemsom was here |
22:27.15 | cr2 | <PROTECTED> |
22:27.34 | cr2 | this is 16MHz in real life |
22:27.53 | cr2 | but you should make the 64MHz entry out of it :) |
22:28.08 | cr2 | replace 16000000 by 64000000 |
22:28.13 | tpr | :) |
22:28.15 | phh | the serial driver asks for 64M? |
22:28.16 | cr2 | and put this line in the end |
22:28.17 | tpr | clock.c |
22:28.18 | tpr | :) |
22:28.22 | cr2 | phh: yes. |
22:28.25 | phh | k |
22:28.29 | cr2 | Bps*16 |
22:28.32 | phh | tpr: -wince. |
22:28.54 | cr2 | but wince enables 16MHz clock for 4Mbit |
22:28.55 | tpr | oh right :) amms-wince |
22:29.01 | phh | ok so userland asks for 4Mbps, so serial asks for 64Mhz, clock gives 16Mhz, so userland get 1Mbps. |
22:29.06 | phh | seems simple. |
22:29.13 | cr2 | don't know how to solve this puzzle without the CPU manual |
22:29.52 | cr2 | the 115200 clock setting is ok. and uses the same logic |
22:29.54 | tpr | something related to pll |
22:29.57 | tpr | PLL |
22:30.18 | cr2 | so i'm puzzled |
22:30.46 | tpr | depends of an external quartz i think |
22:31.01 | cr2 | phh: we may add the PLL frequency to this list |
22:31.02 | phh | cr2: i've seen that qdsp can handle A2DP, maybe the A2DP stream can go to BT chip without changing clock ? |
22:31.13 | Captnoord | the 7200 doc's doesn't help.... or at least partly? |
22:31.23 | Captnoord | I know its a older model |
22:31.25 | tpr | do you have it ? |
22:31.28 | Captnoord | yup |
22:31.32 | tpr | i'm looking for that :)) |
22:31.37 | tpr | ive a kaiser |
22:31.38 | Captnoord | still easy to find on google |
22:31.45 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
22:31.46 | tpr | i searched about that today |
22:31.46 | Captnoord | if you know what to look for |
22:31.48 | cr2 | phh: because topa/rhod has different PLL1 setting |
22:31.55 | tpr | at work, but dont have found it |
22:32.18 | Captnoord | google for 80-VE263-25-MSM7200A-BasebandTopics.pdf |
22:32.26 | tpr | tx |
22:32.30 | Captnoord | or |
22:32.30 | Captnoord | 80-VA736-2-MSM7200-SoftwareInterface.pdf |
22:32.33 | cr2 | Captnoord: if you can solve the puzzle, you are welcome. i can't so far |
22:33.10 | Captnoord | what clock |
22:33.11 | cr2 | phh: i have not seen any activity on BT PCM pins |
22:33.13 | Captnoord | uart? |
22:33.20 | Captnoord | or bluetooth? |
22:33.20 | phh | cr2: ok |
22:33.39 | Captnoord | or gps... |
22:34.03 | cr2 | Captnoord: 4Mbit BT |
22:34.15 | Captnoord | k |
22:34.24 | cr2 | phh: 4mbit vs 115200 is a lot of bandwidth |
22:34.35 | phh | i know. |
22:34.46 | phh | but 1mbps vs 115200bauds, it's just *10 :p |
22:34.57 | cr2 | phh: we may start with 460800 |
22:35.16 | cr2 | but then you need to cook a .bts command for switching :) |
22:35.33 | cr2 | and it's not 100% sure that the BT firmware will support it. |
22:35.46 | cr2 | but since we don't have brf6300 datasheet.... |
22:36.13 | tpr | erk only chinese and russian forums |
22:36.14 | cr2 | Captnoord: find me the brf6300 datasheet with google ;) |
22:37.05 | Captnoord | cr2 I love your sarcasm at night |
22:37.14 | phh | grr |
22:37.18 | phh | built kernel without msm serial hs |
22:37.43 | cr2 | tpr: the most PITA comes from the fact, that we mess on the firmware level without any docs. |
22:37.46 | tpr | argghhh i dont have keys for the russian image code :p |
22:37.53 | Captnoord | cr2 isn't that one Texas Instruments? |
22:38.02 | cr2 | Captnoord: yes |
22:39.20 | *** join/#htc-linux infernixx (i=nix@unaffiliated/infernix) |
22:39.53 | *** part/#htc-linux infernixx (i=nix@unaffiliated/infernix) |
22:39.59 | cr2 | phh: all these fuckers have pushed us to a firmware level where GPL is becoming useless |
22:40.09 | phh | yes |
22:40.22 | phh | they didn't even thaught about linux at the time they made it i think |
22:40.29 | cr2 | phh: that's why i mean that msm kernel is clearly against the spirit of GPL |
22:42.16 | tpr | MSM7200 Software Interface Manual 80-VA736-2 Rev. B August 2, 2006 |
22:42.16 | tpr | MSM7200A Chipset Training MSM7200A Baseband Topics 80-VE263-25 Rev. A March, 2007 |
22:42.42 | phh | tpr: gimme :p |
22:43.09 | cr2 | phh: let me know about the pseudo-64M entry. so i can go to sleep :) |
22:43.21 | phh | trying |
22:43.34 | phh | forgot rfkill. |
22:43.35 | tpr | http://andblogs.net/2009/05/specs/ |
22:43.36 | tpr | Update 2:Due to the cease and desist letter I received from Qualcomms legal representation, I removed the documents that were posted here and deleted my copies. If you downloaded them earlier, they ask that you do the same to protect their confidential information (and help keep me out of further trouble.) Thanks. |
22:43.40 | phh | ARGH |
22:43.41 | tpr | lol |
22:43.43 | phh | forgot to build rfkill too |
22:43.52 | Captnoord | tpr: i'll pm you |
22:44.35 | cr2 | phh: you must have a strange defconfig :) |
22:44.47 | phh | yes this diamond defconfig needs to be fixed. |
22:45.05 | Captnoord | uploading takes a bit |
22:45.05 | cr2 | what has happened with linuxtogo git ? |
22:45.14 | phh | don't know |
22:45.16 | phh | just broken again |
22:45.21 | cr2 | i don't see any updates since 9 days |
22:45.41 | phh | yes it's broken |
22:45.45 | cr2 | sometimes i wish the hh.org CVS back. |
22:46.25 | phh | i hope this build will be the good one. |
22:46.39 | cr2 | ok |
22:47.17 | gehzumteufel | Can't use sourceforge as the respository? |
22:47.18 | cr2 | and i need to host the haret tree on some reliable server |
22:47.27 | phh | what about github ? |
22:47.35 | gehzumteufel | github is good |
22:47.37 | phh | i find it more developer friendly |
22:47.49 | cr2 | don't need git for haret. CVS is more than enough |
22:48.15 | gehzumteufel | While I can see the reasoning, at least it would be up all the time |
22:48.18 | cr2 | when you have 1-2 developers |
22:48.35 | *** join/#htc-linux [1]Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
22:49.05 | cr2 | phh: do you use the 115MB EBI1 layout ? |
22:49.28 | phh | hu ? |
22:49.28 | phh | how do you want to do that ? |
22:49.28 | cr2 | phh: i'd like to bring FB in SMI to some logical conclusion :) |
22:49.28 | phh | GPU0 in SMI1 ? |
22:49.44 | cr2 | GPU0 is always in SMI1 |
22:49.44 | phh | FB is already in smi |
22:49.45 | *** join/#htc-linux Skydmig (n=LarsOevl@188.178.241.206) |
22:49.52 | phh | ho sorry it was GPU1 |
22:49.57 | phh | only GPU1 remains in ebi |
22:50.05 | phh | i tried to move it to SMI2 |
22:50.07 | phh | but no luck |
22:50.09 | cr2 | phh: you should put the fixed items into smi64 |
22:50.24 | cr2 | hmm, ok |
22:50.40 | phh | i also tried to define smi2 as an "extra memory bank" |
22:50.42 | phh | kernel just won't start |
22:51.20 | cr2 | ok, diam is a bit different |
22:51.57 | phh | hciattach does the same as usual |
22:52.27 | cr2 | phh: ok, can you make the .bts compiler ? |
22:52.29 | gehzumteufel | Are you guys trying to get a base config of the kernel that works on all devices with the same core? |
22:52.36 | phh | [ 150.292785] clock-wince: pc_clk_set_rate: id=35 rate=64000000 |
22:52.36 | phh | [ 150.309173] clock-wince: set mdns: 35, 64000000; bitidx=26, offset=dc, ns=0 |
22:52.36 | phh | [ 150.325408] PLL0: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz) |
22:52.36 | phh | [ 150.341644] clock-wince: set_mdns_host_clock: 35, freq=64000000 pll4=245760000 |
22:52.40 | phh | what's that pll4 ? |
22:52.50 | phh | and there is a strange: |
22:52.52 | phh | [ 140.267761] clock-wince: pc_clk_set_rate: id=35 rate=7372800 |
22:52.57 | cr2 | "4" is an index |
22:53.16 | cr2 | 4 is PLL0, 1 is PLL1 |
22:53.21 | phh | oh right |
22:53.49 | phh | cr2: any doc somewhere about this .bts file type ? |
22:53.52 | cr2 | the code needs to be rewritten anyway |
22:53.55 | phh | the baudrate command. |
22:54.20 | cr2 | phh: hciattach source |
22:54.26 | phh | the 7MHz clock is for 115200 ? |
22:54.26 | cr2 | phh: i have .bts and googel .bin decompiler c code |
22:54.39 | phh | cr2: hciattach doesn't understand firmware's command |
22:54.48 | cr2 | phh: 7372800 is 460800*16 |
22:54.58 | phh | ok |
22:55.18 | cr2 | phh: which also uses the /4 baud dividor |
22:55.32 | cr2 | phh: then the hciattach is a problem |
22:55.48 | cr2 | phh: then we need to write our own hciattach. |
22:56.11 | [1]Captnoord | we'r talking about setting the |
22:56.12 | [1]Captnoord | MODEM_CLK_MISC_CTL |
22:56.12 | cr2 | combining .bts features with googel innovation |
22:56.16 | [1]Captnoord | clock div's |
22:56.31 | phh | [1]Captnoord: can you give me the files ? |
22:56.47 | [1]Captnoord | sure I just deleted them from my server |
22:56.47 | phh | google doesn't really help |
22:56.48 | [1]Captnoord | hehe |
22:56.48 | cr2 | [1]Captnoord: we need brf6300 datasheet |
22:56.51 | [1]Captnoord | but okey |
22:56.55 | [1]Captnoord | cr2 I know |
22:57.11 | [1]Captnoord | i'm also "googling" for them!!!!! |
22:57.14 | tpr | 1: Halted |
22:57.14 | tpr | 0: Not halted |
22:57.33 | cr2 | phh: ok, good nigh |
22:57.49 | [1]Captnoord | 3 minutes |
22:57.50 | gehzumteufel | I was looking for a detailed data sheet on teh brf6300 and found nothing of interest |
22:57.53 | [1]Captnoord | and i'll be 27 |
22:57.55 | [1]Captnoord | :( |
22:58.04 | gehzumteufel | getting older is fantastic |
22:58.08 | gehzumteufel | I am going to be 26 in a month |
22:58.21 | tpr | i'm 30 |
22:59.24 | [1]Captnoord | instead of searching for the brf6300 |
22:59.35 | [1]Captnoord | maybe we should search for the DBF81H904 |
22:59.42 | [1]Captnoord | which is a almost exact clone |
22:59.45 | gehzumteufel | Is that the component id? |
22:59.50 | gehzumteufel | what is the difference? |
23:00.04 | [1]Captnoord | http://info.tactnet.co.jp/cgi-bin/soshin/jprodetl.cgi?pf=0202&pm=0202&pn=DBF81H904 |
23:00.06 | [1]Captnoord | dono |
23:00.27 | tpr | Clock selection, programming, and gating are under ARM9 control. |
23:00.38 | tpr | arm 9 is the radio |
23:00.38 | Reactor16 | OuT |
23:00.41 | *** part/#htc-linux Reactor16 (i=Reactor1@93.182.132.89) |
23:00.44 | phh | [1]Captnoord: this is the oscillator or something like that |
23:00.51 | phh | a "companion" to brf6350 i guess |
23:01.26 | [1]Captnoord | hmm I see |
23:01.38 | [1]Captnoord | http://www.eetop.cn/blog/html/48/359448-13447.html |
23:02.19 | phh | looks like it |
23:02.45 | phh | i just don't understand how to get the file :/ |
23:02.47 | [1]Captnoord | my chineese is as bad as my spanish |
23:02.51 | phh | :p |
23:03.02 | gehzumteufel | they are at the bottom |
23:03.05 | gehzumteufel | with the disc drive |
23:03.14 | phh | yeah i figured that out |
23:03.17 | phh | the problem is the next part :p |
23:03.18 | gehzumteufel | You have to register |
23:03.34 | *** join/#htc-linux ppman (n=mkern@pool-71-250-27-31.nwrknj.east.verizon.net) |
23:03.41 | ppman | ~seen mdrobnak |
23:03.44 | apt | mdrobnak is currently on #htc-linux (19h 27m 16s). Has said a total of 5 messages. Is idling for 10h 41m 45s, last said: 'anyway, gotta run.'. |
23:03.45 | [1]Captnoord | http://forum.eet-cn.com/FORUM_POST_10002_1200109871_0.HTM |
23:03.47 | gehzumteufel | You can't register though |
23:03.56 | phh | url are in english, that's useful :p |
23:04.08 | gehzumteufel | lol |
23:04.11 | gehzumteufel | just hover over the links |
23:04.17 | gehzumteufel | they will be in english in the status bar |
23:05.34 | [1]Captnoord | http://www.jorjin.com/Product_SiPmodule_WG7210.htm |
23:05.39 | phh | the one we want is WG7210-SPC-v05.rar |
23:07.15 | gehzumteufel | Captnoord: /ns ghost Captnoord password <--use that command if your sn is registered |
23:07.20 | tpr | CHIP_BASE = 0x80000000 clock register are at start of that |
23:07.24 | tpr | registers |
23:07.27 | tpr | and dividers |
23:07.39 | Captnoord | gehzumteufel: it happens so freaking a lot..... |
23:07.48 | gehzumteufel | haha |
23:08.03 | tpr | GLBL_SLEEP_EN |
23:08.05 | Captnoord | I really should fuck my isp in the ****** |
23:08.19 | tpr | The GLBL_SLEEP_EN register is used to halt the corresponding clock signals when the |
23:08.19 | tpr | Modem ARM stdbywfi signal goes active. |
23:08.21 | gehzumteufel | that sucks, but that basically is the "kick my timedout nick" |
23:08.37 | Captnoord | http://www.jorjin.com/Support_Download.htm |
23:09.10 | phh | Captnoord: we already have that one |
23:09.14 | phh | well maybe not *that* one |
23:09.42 | phh | but wlan is no problem now |
23:09.50 | Captnoord | I know |
23:09.53 | Captnoord | its bt |
23:10.04 | *** join/#htc-linux stickboy (n=anonymou@128.153.179.208) |
23:10.59 | tpr | so we need to select device to sleep at address 0x80000000 (29 bit), and activate the interupt at address GLBL_SLEEP_EN (0x80000000 + 0x1C) |
23:11.15 | tpr | like the lpt port :) |
23:13.02 | tpr | hmm PIC programming is easy compared to this device |
23:13.12 | phh | hehe |
23:13.37 | Captnoord | hehe |
23:13.38 | Captnoord | yup |
23:13.40 | Captnoord | very easy |
23:13.48 | Captnoord | even LPC arm's are easy |
23:13.52 | phh | i can't get any datasheet :( |
23:14.10 | Captnoord | me to |
23:14.11 | Captnoord | crap |
23:14.12 | Captnoord | :( |
23:14.19 | phh | my "guess what i mean" level is too low. |
23:14.20 | Captnoord | http://labs.embinux.org/git/ |
23:14.22 | Captnoord | there git repo |
23:18.50 | Captnoord | http://www.google.com/codesearch/p?hl=nl&sa=N&cd=4&ct=rc#JPPv8aDbSg4/PLATFORM/BeagleBoardI/FILES/platform.reg&q=BRF630 |
23:18.57 | Captnoord | same board |
23:20.26 | phh | now i have to check my spam box to see if i got a chinese non spam :D |
23:21.30 | Captnoord | do we have the doc's of the brf6150 |
23:21.30 | townkitty | phh, i got those 3 files |
23:21.31 | townkitty | ;) |
23:21.39 | phh | three ? |
23:21.47 | phh | we only need 7210 :p |
23:22.33 | phh | townkat: can you put it somewhere please ? |
23:22.43 | tpr | understanding new kernel code architecture and struct "plugins" is as hard as configuring linux at first steps on VGA (1997) (unknown board vids etc) ;) |
23:22.49 | tpr | for me |
23:23.06 | gehzumteufel | Does the Hero kernel image help at all? |
23:23.07 | phh | hu ? |
23:23.10 | phh | for me it's *way* harder :p |
23:23.16 | phh | gehzumteufel: not at all |
23:23.23 | gehzumteufel | Reason being? |
23:23.34 | phh | nothing new in it |
23:24.07 | gehzumteufel | Right, but there isn't anything that is in there that could advance the rhod port? |
23:24.08 | townkat | ftp://86.127.6.111/ |
23:24.17 | tpr | ca serait presque plus simple a comprendre en debuggant le kernel avec ollydbg ;) |
23:24.27 | gehzumteufel | everyone here should get dropbox |
23:24.31 | phh | tpr: english channel ;) |
23:24.42 | tpr | yep yep ;) |
23:24.43 | phh | ollydbg ? |
23:24.51 | townkat | i registered with google translate :D, very effective |
23:25.02 | phh | townkat: i did so, but got no confirmation mail |
23:25.15 | townkat | me neither |
23:25.16 | townkat | :)) |
23:25.39 | phh | oh. |
23:25.51 | townkat | it does not need confirmation |
23:26.06 | townkat | the account works imediately |
23:26.51 | townkat | btw, does it help for blac too ? :) |
23:27.36 | phh | doesn't help at all :( |
23:27.46 | tpr | try to register on 4pda.ru forums |
23:27.51 | Captnoord | commercial crap |
23:27.52 | tpr | with google translate ;p |
23:28.10 | tpr | locked on gapcha code |
23:28.18 | gehzumteufel | 4pda.ru is easy to register on |
23:28.30 | tpr | of you have russian keyboard maybe |
23:28.32 | gehzumteufel | I think I have a membership there already |
23:28.43 | gehzumteufel | You don't need a russian keyboard |
23:28.58 | tpr | for the image code |
23:29.10 | gehzumteufel | Again, no need for a Russian keyboard |
23:29.22 | gehzumteufel | Just install the layout and use wikipedia to find the corresponding keys |
23:29.32 | tpr | hehe |
23:29.53 | tpr | between pi and ro |
23:30.24 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
23:31.17 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
23:31.42 | tpr | the image is not straight |
23:31.50 | tpr | so to understand the symbols... |
23:32.03 | tpr | it's like stargate symbols for me ;p |
23:38.32 | gehzumteufel | lol |
23:38.38 | gehzumteufel | hold on let me see if I registered there before or not |
23:39.31 | gehzumteufel | oh fucking hell |
23:39.45 | gehzumteufel | I tried this one a ton of times and I can't get it to accept the fucking registration code I enter |
23:41.55 | tpr | ;) you see |
23:42.13 | tpr | it's like a "russian only" advertising |
23:42.59 | phh | let me know if you get anything |
23:43.11 | phh | about brf6300/brf6350 |
23:43.18 | gehzumteufel | Nah I can read a bunch of Russian and speak a bit |
23:43.42 | gehzumteufel | User with this name exists. Go back and double check you entered data. |
23:43.43 | gehzumteufel | wtf |
23:43.47 | gehzumteufel | Apparently I already registered |
23:44.01 | tpr | !) check your email adress |
23:44.08 | tpr | address |
23:44.14 | gehzumteufel | lol I did |
23:44.36 | Captnoord | sleep well all |
23:44.43 | Captnoord | need to hit the bed |
23:44.45 | Captnoord | nn all |
23:44.45 | gehzumteufel | That shit thinks I exist, and I can't login |
23:45.34 | *** join/#htc-linux skodde (n=skodde@adsl-ull-147-19.47-151.net24.it) |
23:46.30 | tpr | nice gpio are shadowed |
23:46.53 | tpr | so no problem for input output i think (to read) |
23:47.05 | gehzumteufel | w00t I can recover my password lol |
23:49.01 | phh | OMG, it supports usb2 480Mbps at OTG |
23:49.12 | phh | well doesn't mean handle. |
23:50.49 | tpr | :) which way ? |
23:50.58 | tpr | device or host ? |
23:51.03 | phh | host |
23:51.26 | tpr | which cpu ? |
23:51.33 | phh | msm7200a |
23:51.38 | tpr | oh ok :) the brf or msm ? |
23:51.44 | tpr | ok |
23:52.08 | tpr | could be sweet to make something like a hub |
23:52.09 | tpr | :) |
23:52.22 | tpr | to keep adb |
23:52.24 | phh | yeah... later... maybe :p |
23:53.34 | tpr | to have a shell on console fb : remove your system.sqsh ;)) |
23:53.43 | phh | lol |
23:53.53 | phh | any brf63** datasheet ? |
23:54.41 | tpr | now i need the shift page up |
23:54.46 | tpr | to scroll startup logs |
23:56.51 | tpr | ok, working perfectly |
23:57.01 | tpr | i can update git now.... |
23:57.38 | tpr | does somebody know how to change keylayout ? to use azerty or qwertz.kl ? |
23:57.43 | tpr | android stuff or kernel ? |