| 00:01.03 | *** join/#htc-linux stickboy (n=anonymou@128.153.211.150) |
| 00:19.11 | *** join/#htc-linux Bry8Star (n=Bry8Star@99.146.38.0) |
| 00:44.02 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 01:58.07 | *** join/#htc-linux BHSPitMonkey (n=stephen@unaffiliated/bhspitmonkey) |
| 02:27.52 | *** join/#htc-linux stickboy (n=anonymou@128.153.211.150) |
| 02:48.44 | *** join/#htc-linux dcordes (n=luke-g@unaffiliated/dcordes) |
| 03:12.32 | *** part/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 03:26.28 | mdrobnak | Anyone here, or everyone asleep (as I will be soon)? |
| 03:42.30 | *** join/#htc-linux maejrep (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) |
| 04:13.30 | *** join/#htc-linux droid001 (n=g1@p4FDCED66.dip.t-dialin.net) |
| 04:20.15 | mdrobnak | figured out the problem. Poorly placed comment underneath an "if" statement results in an empty array value. |
| 04:20.47 | mdrobnak | RIL status: Does not seem to set DNS values right. Needed to make a SUID version of /system/bin/pppd in /data. Registers right, data comes up. |
| 04:25.14 | mdrobnak | Does not crash after voice call. :-) |
| 04:25.37 | mdrobnak | (A side note, I think most of the problem was the code in /etc/ppp/ip-up that dzo found.) |
| 04:25.45 | mdrobnak | Time for bed. |
| 04:31.03 | *** join/#htc-linux NetRipper (n=netrippe@tikkie.net) [NETSPLIT VICTIM] |
| 04:34.53 | *** join/#htc-linux thedicemaster (n=thedicem@j89051.upc-j.chello.nl) [NETSPLIT VICTIM] |
| 04:51.39 | jedlhl | does anyone know what the level of suport for x50/1v is like nowadays, it still look minimal on the 'official' project site and on the axdroid blog/wiki |
| 05:19.44 | jedlhl | #poky |
| 05:34.11 | *** join/#htc-linux stickboy_ (n=anonymou@128.153.211.150) |
| 06:06.05 | *** join/#htc-linux townkitty (n=town@86.127.6.111) |
| 06:08.37 | *** join/#htc-linux PoohbaLT1 (n=BlkPoohb@c-69-141-71-249.hsd1.nj.comcast.net) |
| 06:10.17 | *** join/#htc-linux pitillo (n=pitillo@84.123.96.129.dyn.user.ono.com) [NETSPLIT VICTIM] |
| 06:11.54 | *** join/#htc-linux tmzt (n=tmzt@adsl-99-52-65-233.dsl.akrnoh.sbcglobal.net) [NETSPLIT VICTIM] |
| 06:11.59 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) |
| 06:24.18 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) [NETSPLIT VICTIM] |
| 06:29.07 | *** join/#htc-linux GlemSom (n=glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 06:37.54 | *** join/#htc-linux dream_kill (n=nospam@92.56.53.50) |
| 06:46.45 | *** join/#htc-linux FR^2 (n=frquadra@frquadrat.de) |
| 08:05.46 | *** join/#htc-linux kiozen (n=kiozen@93.135.192.247) |
| 08:25.14 | *** join/#htc-linux Sti_0239 (n=Where_is@47.249-246-81.adsl-dyn.isp.belgacom.be) |
| 08:25.35 | Sti_0239 | Hello every1 |
| 08:37.45 | *** join/#htc-linux toi (n=pleemans@d5153128F.static.telenet.be) |
| 08:53.24 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 08:55.58 | *** join/#htc-linux kvaster (n=kvaster@212.98.181.84) |
| 08:56.14 | *** join/#htc-linux GlemSom (n=glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 08:56.25 | *** join/#htc-linux Gnutoo (n=gnutoo@host137-159-dynamic.54-79-r.retail.telecomitalia.it) |
| 09:06.40 | phh | now i think i might need a git access. |
| 09:10.50 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 09:27.28 | *** join/#htc-linux osilvan_pola100 (n=o@119.123.222.87.dynamic.jazztel.es) |
| 09:33.31 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 09:40.31 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 09:45.07 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 09:46.08 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 09:46.25 | *** join/#htc-linux pleemans (n=toi@84.194.169.109) |
| 09:55.18 | townkitty | hi phh, what's the news? , wh u need git access ? |
| 09:55.49 | phh | phh @ phh-desktop ~/AndroidDiamond/kernel % git diff |wc -l |
| 09:55.49 | phh | 293 |
| 09:55.49 | phh | phh @ phh-desktop ~/AndroidDiamond/kernel % |
| 09:55.55 | phh | and i already commited two or three patches locally. |
| 09:56.28 | townkat | ? |
| 09:56.31 | townkat | :) |
| 09:58.36 | *** join/#htc-linux Gnutoo (n=gnutoo@79.54.159.137) |
| 10:00.26 | *** join/#htc-linux gnutoo_ (n=gnutoo@host137-159-dynamic.54-79-r.retail.telecomitalia.it) |
| 10:00.57 | *** join/#htc-linux Gnutoo (n=gnutoo@79.54.159.137) |
| 10:05.30 | phh | but nothing really useful |
| 10:05.53 | phh | just access through dbgfs to light sensor and "moving" lights |
| 10:06.03 | phh | err, and panel suspend working for diam. |
| 10:06.21 | phh | (well working... not really.) |
| 10:06.55 | luc_ | yay |
| 10:06.59 | luc_ | super |
| 10:07.12 | luc_ | you wiil comit them today? |
| 10:07.17 | luc_ | patches? |
| 10:07.49 | phh | that's why i need git access. |
| 10:09.21 | townkat | but why dont u already have git access ? |
| 10:10.17 | phh | i didn't make many kernel patches yet |
| 10:13.57 | townkat | hciattach /dev/ttyHS1 texas gives about 12 lines now |
| 10:14.02 | townkat | <PROTECTED> |
| 10:14.13 | townkat | is it good ? |
| 10:14.48 | *** join/#htc-linux leviathan (n=quassel@82.192.226.27) |
| 10:14.58 | phh | maybe |
| 10:15.04 | phh | hum |
| 10:15.07 | phh | 12 is too many |
| 10:15.11 | phh | townkat: delete the "firmware" file |
| 10:15.18 | phh | it won't work with it |
| 10:15.39 | phh | until we fix ttyHS's clocks |
| 10:16.00 | *** join/#htc-linux thedicemaster2 (n=thedicem@24.132.89.51) |
| 10:16.09 | townkat | where is the firmware file ? |
| 10:16.18 | phh | android or angstrom ? |
| 10:16.25 | townkat | angstrom |
| 10:16.33 | phh | /lib/firmware/ |
| 10:16.50 | phh | townkat: does it give you a warning about a missing file ? |
| 10:16.54 | townkat | and android ? |
| 10:17.02 | phh | /etc/firmware |
| 10:17.12 | phh | or /initetc/firmware or /system/etc/firmware, or even others. |
| 10:18.39 | phh | townkat: does hciattach says anything ? |
| 10:20.15 | phh | if it just says timeout, then your rfkill is most likely wrong |
| 10:20.18 | phh | or you use the bad ttyHS |
| 10:23.01 | townkat | it ends with timeout |
| 10:24.15 | phh | so first echo 0 > /blabla/rfkill0/state ; echo 1 > /samething and retry hciattach |
| 10:24.24 | phh | if it does the same thing, then you'll have to check which gpios is used on wince |
| 10:24.50 | tmzt | which device? |
| 10:25.24 | townkat | blackstone |
| 10:25.49 | townkat | http://www.htc-linux.org/wiki/index.php?title=Raphael_GPIO says the same gpios as raphael |
| 10:26.00 | phh | ok |
| 10:26.33 | phh | then activate ttyHS0 and see if it works better on it |
| 10:28.41 | phh | townkat: in your board file |
| 10:28.42 | phh | there is a: |
| 10:28.45 | phh | static struct platform_device *devices[] __initdata = { |
| 10:29.01 | phh | inside it, the uart1 is commented and ifdefed (yes both.) |
| 10:29.12 | phh | uncomment it |
| 10:32.39 | tmzt | please don't un-ifdef it though |
| 10:32.44 | tmzt | just add the define or the .config option |
| 10:52.54 | *** join/#htc-linux leaigor (n=laigor@188.134.16.241) |
| 11:08.01 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 11:34.30 | townkat | do console=ttyMSM0 work with angstrom ? |
| 11:35.02 | townkat | ahh sry |
| 11:37.24 | *** join/#htc-linux cr2 (n=cr2@ip-109-84-65-182.web.vodafone.de) |
| 11:42.01 | phh | townkat: hu ? you've a debugger cable ? |
| 11:43.31 | townkat | nope |
| 11:43.51 | phh | then why do you want a console=thing ? |
| 11:44.22 | townkat | nothing, i wanted to ask abt PWF config.txt 0xe000d 0x20000 and copy/pasted the wrong line |
| 11:44.36 | townkat | bt pwf does not work after video initialize i think |
| 11:46.56 | townkat | i dont have /lib/firmware |
| 11:47.20 | townkat | just modules and undev and a bunch of .so's |
| 11:47.23 | phh | well, it's not the problem actually |
| 11:47.52 | phh | if hciattach doesn't say anything else than timeout, then your GPIO/uartdm is wrong |
| 11:48.31 | townkat | hci attach says more than timeout |
| 11:48.37 | townkat | but it ands with time out |
| 11:48.57 | townkat | set mdns: 35, 7372800; bitdx=26 |
| 11:49.04 | phh | what does it say then ? |
| 11:49.20 | phh | this clock is way too high |
| 11:49.30 | townkat | set_mdns_host_clock:35, freq=73 |
| 11:49.46 | phh | oops |
| 11:49.49 | phh | that's the correct frq. |
| 11:49.50 | townkat | 7372800 |
| 11:49.54 | phh | well in raph/diam it is |
| 11:50.06 | phh | i thaught we were running at 115200... there is something i don't get |
| 11:50.11 | townkat | its like this |
| 11:50.24 | townkat | pc_clk_set_rate... |
| 11:50.27 | townkat | set mdns |
| 11:50.34 | townkat | set_mdns_host_clock |
| 11:50.43 | phh | haven't you any ssh ? |
| 11:50.44 | townkat | 4 times |
| 11:50.46 | townkat | so 12 lines |
| 11:50.50 | townkat | no |
| 11:50.57 | phh | maybe first get one ? |
| 11:50.58 | townkat | i tryed to ssh but it does not work |
| 11:51.17 | townkat | u need the full output ? |
| 11:51.31 | phh | actually no, what you gave is enough |
| 11:51.37 | phh | but i think you'd better have an ssh |
| 11:51.42 | phh | testing will be a lot easier |
| 11:51.49 | townkat | i tried to ssh |
| 11:52.01 | townkat | i'll try again now |
| 11:55.53 | *** join/#htc-linux maejrep (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) |
| 11:58.33 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 12:09.47 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 12:23.09 | *** join/#htc-linux townkat (n=town@86.127.6.111) |
| 12:23.31 | dcordes | cr2, what's new? |
| 12:29.27 | townkat | on device screen last line is ether_configure () 1 |
| 12:29.43 | townkat | but no ping to 192.168.0.206 or 202 |
| 12:30.13 | phh | townkat: and you configured your host usb0 to the correct subnet ? |
| 12:30.20 | townkat | nopw |
| 12:30.26 | townkat | how to do it ? |
| 12:30.45 | townkat | debian-kde |
| 12:33.09 | phh | ifconfig usb0 192.168.0.200 |
| 12:33.16 | phh | if your local subnet is not 192.168.0.0/24. |
| 12:33.40 | townkat | and if it is ? |
| 12:36.44 | phh | either disconnect lan or "fix" the initramfs or use brctl |
| 12:39.44 | *** join/#htc-linux balans (n=Administ@212.123.149.239) |
| 12:44.20 | *** join/#htc-linux xperia (n=chatzill@80.254.182.249) |
| 12:45.02 | townkat | yup |
| 12:45.04 | townkat | i have ping |
| 12:46.00 | townkat | root@htcraphael:~# |
| 12:46.01 | townkat | :D |
| 12:46.07 | townkat | phh |
| 12:46.10 | *** join/#htc-linux DarkMasterHalo (n=DarkMast@modemcable070.63-56-74.mc.videotron.ca) |
| 12:46.22 | phh | nice |
| 12:47.27 | townkat | btw, linux is in vmware under xp :D |
| 12:47.47 | xperia | hello to all. does anybody know why my kernel could hang after this message here. ieee80211_crypt: registered algorithm ... |
| 12:47.54 | phh | i can't believe someone actually uses xp |
| 12:48.08 | xperia | as i know after this message it come some proc_comm messages |
| 12:48.20 | phh | xperia: the iee thing is no error |
| 12:48.26 | phh | xperia: are you sure it hangs ? |
| 12:48.36 | phh | last time we got that, it's just the panel which crashed |
| 12:48.38 | phh | not the kernel |
| 12:48.48 | phh | (like running angstrom and try to ssh on it) |
| 12:49.14 | phh | (or android adb if you're lucky) |
| 12:49.20 | xperia | before the new added patches it booted without any problems till the login prompt. |
| 12:49.37 | phh | which patches ? |
| 12:49.43 | phh | git bissect is your friend |
| 12:50.06 | phh | ho wait, i know this one |
| 12:50.11 | phh | it's just your panel code that needs to be updated |
| 12:50.33 | xperia | now it just hang after this line. yeah something with the panel could be the problem i also believe |
| 12:50.42 | xperia | becouse i have tryed a older build |
| 12:51.03 | xperia | and the screen output of the older build is just very fast |
| 12:51.07 | phh | then just adapt the code from board-htcraphael-panel.c to your board |
| 12:51.17 | phh | iirc a single line change can be enough |
| 12:51.26 | xperia | the screen output of the new build is heavy slow |
| 12:51.57 | townkat | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blobdiff;f=arch/arm/mach-msm/board-htcblackstone-panel.c;h=82ad286a5ce2f7a075a7212f7e44afa6407ea105;hp=8435d6c63a74bf17554d4a3dcc08bf02884305da;hb=034fa53eb6215c4ea78845d2ad4d498d5d493e20;hpb=ce52aed167c99e625853ebbe8323df5821088919 |
| 12:52.01 | townkat | this fixed the panel for blackstone |
| 12:52.22 | townkat | it should be similar |
| 12:52.22 | townkat | we had exactly the same problem |
| 12:52.29 | xperia | i use the blackstone panel for my build |
| 12:52.41 | townkat | then the new blackstone panel should work |
| 12:52.44 | townkat | u are not updated |
| 12:53.00 | *** join/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 12:53.07 | townkat | 3 days ago was this patch commited |
| 12:54.02 | xperia | hmmm how can this be. just maked git pull and it said me i was up to date. will prove if the patch exist in my sources. |
| 12:57.28 | *** join/#htc-linux Echo31 (n=olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 13:07.05 | xperia | townkat for what exactly is this patch good ? i have this patch allready in my sources but it looks like it dont fit to my hardware any more |
| 13:07.33 | townkat | i can see there is a board.htckovsky file |
| 13:07.48 | townkat | the changes should be there for you i think |
| 13:07.58 | phh | xperia: backport board-htcraphael-diamond.c to your board |
| 13:10.34 | xperia | phh: should this board better work as the one that is in the repo allready? |
| 13:11.10 | phh | htcraphael is the board of cr2, so it works way better :p |
| 13:11.17 | phh | and he changed the whole panel thing recently |
| 13:11.25 | phh | breaking every non-raph boards |
| 13:11.45 | xperia | townkat: i cant see any changes in the kovsky board for the panel. http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/board-htckovsky.c;h=86d5958c6eb4f79749ac68dc8049d9cbdcbdeb1e;hb=034fa53eb6215c4ea78845d2ad4d498d5d493e20 |
| 13:12.56 | townkat | of corse |
| 13:13.06 | townkat | someone changed blackstone-panel only |
| 13:13.23 | jedlhl | this is prolly the wrong channel but has anyone heard of any nice universal remotes that have a big hacking commune around them? Most handhelds just aren't quite the right formfactor |
| 13:13.26 | townkat | you should copy the changes to kovsky-panel |
| 13:13.50 | xperia | townkat: from the blackstone board right ? |
| 13:14.00 | jedlhl | a nice array of hard buttons but still with a reltively large/quality touchscreen |
| 13:14.03 | townkat | exactly |
| 13:15.41 | townkat | the code in the link i gaved u should be enough i think |
| 13:16.32 | *** join/#htc-linux gekas (i=8d1c069c@gateway/web/freenode/x-ehjmhymezgqnairl) |
| 13:16.56 | townkat | u only have to change 2 lines i think |
| 13:17.24 | xperia | yeah becouse first i dont see any relevant patches in the blackstone board that deal with the panel patch first. and second my sources are uptodate but the kernel wont boot |
| 13:17.44 | xperia | sorry: correction it hangs |
| 13:18.00 | xperia | will try to revert the patch |
| 13:18.09 | xperia | maybe it will work again |
| 13:19.26 | xperia | think however the chance would be small |
| 13:19.42 | xperia | as a lot of panel stuff was changed |
| 13:24.19 | phh | copy the code from raphael board |
| 13:24.23 | phh | i've just done it for diam |
| 13:24.24 | phh | it's easy |
| 13:25.48 | phh | just do diff -u yourboardthing raphaelthing to see what changed |
| 13:26.04 | xperia | okay will try that too |
| 13:31.33 | *** join/#htc-linux kvaster (n=kvaster@212.98.181.84) |
| 13:41.06 | xperia | it hangs at the panel. |
| 13:51.34 | *** join/#htc-linux ali12341 (n=al@80.79.44.110) |
| 14:01.13 | gekas | phh, have i read that correctly, that you got wifi to work? |
| 14:01.20 | phh | yes |
| 14:01.23 | phh | on diam/raph |
| 14:01.32 | gekas | nice :) |
| 14:03.07 | gekas | are there big differences to black/rhod? |
| 14:03.20 | phh | i don't think so |
| 14:03.57 | gekas | that sounds good :) |
| 14:04.18 | gekas | thx for your efforts |
| 14:04.31 | phh | most of the efforts are from cr2 |
| 14:05.01 | gekas | but i cant thank him right now ;) |
| 14:11.01 | townkat | <xperia> sorry: correction it hangs |
| 14:11.07 | townkat | wht do u mean that it hangs ? |
| 14:11.49 | dcordes | will somebody please donate a pizza delivery? pm for address |
| 14:12.52 | gekas | dcordes: if you find a volunteer.. i´d take one, too |
| 14:14.41 | dcordes | if there will be no donnor in the next ten minutes I will use one I find in fridge and will not be amused. |
| 14:14.57 | xperia | townkat: after the revert of the two line patch in the blackstone-panel it hangs now at the frambuffer panel init 480x800 message |
| 14:15.49 | xperia | dcordes: :-) |
| 14:16.07 | xperia | had pizza yesterday allready ! |
| 14:16.17 | gekas | i´d be happy to have one in the freezer ;) |
| 14:16.17 | phh | dcordes: how to get a git access on linuxtogo ? |
| 14:16.43 | phh | (to stop flooding you with patches ;) |
| 14:17.36 | townkat | phh, do u also receive that loopt procces crash in android ? |
| 14:18.03 | phh | townkat: no, because i removed it, because i received it :D |
| 14:18.04 | dcordes | phh, you need to register at linuxtogo.org and request commit access for the mobile-linux project |
| 14:18.16 | phh | thanks |
| 14:36.33 | *** join/#htc-linux kvaster (n=kvaster@212.98.181.84) |
| 14:39.08 | *** join/#htc-linux Gnutoo (n=gnutoo@host137-159-dynamic.54-79-r.retail.telecomitalia.it) |
| 14:41.20 | *** part/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 14:45.40 | Gnutoo | hi I must go soon but I just wanted to say that I didn't found a craddle/docking station...for kgdb-serial |
| 15:08.20 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 15:12.54 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 15:15.11 | Captnoord | dcordes: who to PM I could use a pizza now.... |
| 15:16.20 | gekas | dcordes asekd for a pizza some hours ago |
| 15:16.38 | dcordes | Captnoord, the situation is hopeless. I had to prepare one myself |
| 15:17.39 | gekas | :) |
| 15:18.03 | *** join/#htc-linux chemical1979 (i=59f55dc9@gateway/web/freenode/x-icjqjgecvchhsfsg) |
| 15:18.17 | phh | :) |
| 15:18.49 | chemical1979 | hey phh, you finally slashdotted your webspace there with that announcement :D |
| 15:19.05 | phh | chemical1979: not my problem if noone cares about mirroring. |
| 15:19.25 | phh | (anyway, i missed two things, i released to early) |
| 15:20.26 | mdrobnak | Hey everyone. |
| 15:20.32 | chemical1979 | I've some webspace on a german hoster, let me check my limits there. perhaps that can be of help |
| 15:20.36 | mdrobnak | phh: What did you release? |
| 15:21.04 | phh | mdrobnak: full android build with wifi and bt and working screen on diam |
| 15:21.09 | phh | donut one |
| 15:21.14 | mdrobnak | nice |
| 15:21.18 | phh | chemical1979: for the record, i had some 100s requests. |
| 15:21.25 | phh | (if it can help you do the maths) |
| 15:22.07 | mdrobnak | How big is the file? |
| 15:22.11 | chemical1979 | 50GB/month (I don't use that anyway). |
| 15:22.12 | phh | 70MB |
| 15:22.23 | phh | 715 users .... |
| 15:22.27 | phh | not sure this will be enough |
| 15:22.35 | phh | i'll put it on dl.free.fr |
| 15:22.42 | phh | even if it's slow for most users |
| 15:23.24 | mdrobnak | I've got 400GB of transfer |
| 15:23.44 | mdrobnak | ~5000 downloads |
| 15:25.48 | Captnoord | mine are unlimited... but.... its fair use.... |
| 15:25.48 | Captnoord | so |
| 15:25.51 | Captnoord | i'm not really in the mood to fuck up |
| 15:26.08 | Captnoord | but |
| 15:26.17 | Captnoord | untill in a the next 2 months fibre is installed here |
| 15:26.20 | phh | anyway, on dl.free, users get 100kB/s, should be enough. if someone is in mood to mirror it, he will. |
| 15:26.25 | Captnoord | I can buy myself a nice server |
| 15:26.27 | phh | Captnoord: haha, you lucky |
| 15:26.31 | Captnoord | and i'll host stuff for free |
| 15:26.35 | phh | how much upload will you have ? |
| 15:26.35 | Captnoord | for you guys |
| 15:26.37 | Captnoord | then |
| 15:26.40 | Captnoord | 100MBIT |
| 15:26.45 | mdrobnak | :-O |
| 15:26.55 | Captnoord | and 100 Mbit down of course |
| 15:26.55 | Captnoord | :P |
| 15:26.57 | mdrobnak | I thought I was happy with 20MBit heheh |
| 15:27.02 | phh | only 100Mbps of down ? :p |
| 15:27.08 | Captnoord | up and down |
| 15:27.20 | Captnoord | and I just read that with a new trick they can improve it |
| 15:27.20 | phh | they could give you 1Gbps |
| 15:27.23 | phh | . |
| 15:27.26 | Captnoord | to over 1gb |
| 15:27.40 | Captnoord | but i'm happy to get fibre |
| 15:27.47 | mdrobnak | yeah, here in the US, the Verizon FiOS can do 1Gbps with just a equipment change at the CO. |
| 15:27.50 | Captnoord | no more fighting with my father over who uses the most bandwith |
| 15:27.59 | mdrobnak | lol |
| 15:28.04 | Captnoord | but... now he is fucked |
| 15:28.16 | Captnoord | because his router was destroyed |
| 15:28.19 | Captnoord | and he is using mine |
| 15:28.26 | Captnoord | and he is now on the lostest prio |
| 15:28.28 | Captnoord | always |
| 15:28.33 | Captnoord | loves QoS |
| 15:28.37 | mdrobnak | hahaha thats just mean |
| 15:28.42 | Captnoord | nope |
| 15:28.51 | phh | yes it is :po |
| 15:28.52 | Captnoord | he wondered why I bought my own router.... |
| 15:28.56 | phh | lol |
| 15:28.59 | Captnoord | I awnsered to him that he always buys crap stuff.... |
| 15:29.09 | Captnoord | and I was right |
| 15:29.09 | Captnoord | :D |
| 15:29.13 | mdrobnak | hahaha |
| 15:29.33 | Captnoord | besides his router... ( when it was working ) didn't got past 10 days online |
| 15:29.43 | Captnoord | mine now... with some nice custom firmware is running over 120 days |
| 15:30.19 | mdrobnak | if it's a WRT based router, make sure it's got all the security patches |
| 15:30.29 | mdrobnak | there was some worm targetting them, turning them into bots! |
| 15:30.34 | Captnoord | hehe |
| 15:30.38 | Captnoord | I already tested it.... |
| 15:30.48 | mdrobnak | good man |
| 15:30.53 | Captnoord | i'm very paranoid |
| 15:31.09 | phh | Captnoord: will it handle the 100Mbps flow ? |
| 15:31.13 | Captnoord | also when my father asked me for the password to the thing.... |
| 15:31.20 | Captnoord | I went to the web form |
| 15:31.24 | Captnoord | and enabled the password |
| 15:31.25 | Captnoord | :P |
| 15:31.40 | Captnoord | beeing 1 step ahead always |
| 15:31.41 | Captnoord | nah |
| 15:31.45 | Captnoord | i'm major nagging.... |
| 15:32.23 | Captnoord | phh: nope.... but it doesn't have to |
| 15:32.27 | Captnoord | untill I actualy get fibre |
| 15:32.32 | Captnoord | its good |
| 15:32.41 | Captnoord | when I got fibre I will buy myself a new one |
| 15:32.50 | Captnoord | and use the old one to kissmet around |
| 15:33.21 | mdrobnak | heh |
| 15:37.01 | *** join/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 15:38.25 | Captnoord | I think the next one would be something like |
| 15:38.26 | Captnoord | http://www.netgear.nl/producten/producten.php?prod=WNR3500 |
| 15:39.31 | phh | i think i'm not going to have fibre before years :( |
| 15:40.11 | Captnoord | it was a private project from some organisation to setup fibre here.... |
| 15:40.47 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 15:40.48 | Captnoord | long story short... |
| 15:41.01 | Captnoord | guy with some money died.... |
| 15:41.07 | Captnoord | he was the type we like here.... |
| 15:41.08 | Captnoord | tech |
| 15:41.11 | Captnoord | love new stuff |
| 15:41.14 | Captnoord | and in his will |
| 15:41.21 | phh | huhu |
| 15:41.39 | Captnoord | there was a line that a percentage of his money should be spend on making fibre possible |
| 15:41.41 | Captnoord | or something like that |
| 15:43.20 | mdrobnak | thats kinda interesting |
| 15:43.53 | Captnoord | http://www.glasvezelwijchen.nl |
| 15:43.56 | Captnoord | its dutch |
| 15:45.37 | *** part/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 15:54.23 | Captnoord | phh: full android release? where do I get it |
| 15:54.23 | Captnoord | :P |
| 15:54.34 | phh | it's uploading |
| 15:54.42 | phh | wait 5m10s :p |
| 15:54.45 | Captnoord | lol |
| 15:55.14 | phh | basically it's babijoee's build actually |
| 15:55.23 | phh | just with wifi/bt/panel fix for diams |
| 15:56.15 | phh | (raphs already have this fix) |
| 15:58.51 | chemical1979 | which kernel is this based on |
| 15:59.04 | chemical1979 | I really was astonished the first time I used his build. |
| 15:59.05 | phh | mine |
| 15:59.17 | chemical1979 | that was the first kernel I've ever used that wasn't laggy or something like that |
| 15:59.20 | phh | well, i don't think it's the kernel, but the squashfs |
| 15:59.31 | phh | you'll try my version and you'll see :p |
| 15:59.34 | mdrobnak | Well, as long as you don't have the broken /etc/ppp/ip-up script, you'll be fine. |
| 15:59.36 | phh | donut can also help a lot |
| 15:59.54 | mdrobnak | (dzo found stuff being sent to /dev/smd0 from there, was probably the cause of the RIL crashes) |
| 15:59.55 | phh | mdrobnak: err, i haven't succeded into getting 3G up yet on this build |
| 16:00.05 | phh | but i haven't noticed any RIL crash |
| 16:00.08 | phh | just no connection. |
| 16:00.20 | mdrobnak | Do you have smodem in your build? |
| 16:00.30 | mdrobnak | or setupmodem.sh ? |
| 16:00.56 | phh | setupmodem.sh |
| 16:01.10 | chemical1979 | I'm curious whether these MMC timeouts are gone |
| 16:01.18 | phh | ip-up contains: |
| 16:01.20 | phh | if [ -e /sys/class/vogue_hw/gsmphone ] ; then |
| 16:01.20 | phh | <PROTECTED> |
| 16:01.21 | phh | else |
| 16:01.21 | phh | <PROTECTED> |
| 16:01.21 | phh | fi |
| 16:01.26 | phh | i have to drop these i guess ? |
| 16:01.29 | mdrobnak | Yeah see those echo lines, get rid of them |
| 16:01.31 | phh | chemical1979: no |
| 16:01.45 | phh | mdrobnak: ok thanks then :) |
| 16:02.05 | mdrobnak | Since I fixed my misplaced comment line that messed up a response from registration... |
| 16:02.12 | phh | i just finished uploading ... pfff |
| 16:02.12 | mdrobnak | I had it online all of last night |
| 16:02.13 | mdrobnak | no problems |
| 16:02.21 | phh | now i have to do it again |
| 16:02.22 | phh | blaa |
| 16:02.31 | mdrobnak | Just the rootfs needs to be modified |
| 16:02.36 | mdrobnak | or was it 1 archive? |
| 16:02.44 | phh | it's rootfs |
| 16:02.50 | phh | but i prefer doing all in one packages |
| 16:03.00 | mdrobnak | ah |
| 16:03.06 | phh | and because wifi needs it. |
| 16:03.27 | phh | (because of module version and such things) |
| 16:03.33 | mdrobnak | I'm having some trouble with getting the DNS set right after pppd starts..looking into that now. Once that's fixed, I should be good. |
| 16:03.33 | mdrobnak | Yeah, I hear ya |
| 16:03.36 | chemical1979 | it makes problem reporting easier |
| 16:04.01 | phh | mdrobnak: set it to opendns |
| 16:04.47 | phh | chemical1979: yes that was a major problem in my first "wifi build" (angstrom one not android), i just gave zImage and initramfs, and many people just setted the initramfs .... |
| 16:04.56 | *** join/#htc-linux pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 16:04.57 | phh | some tried just zImage + android's initramfs |
| 16:04.59 | phh | and such things. |
| 16:05.08 | mdrobnak | Well, the problem is right now it's not setting anything at all. |
| 16:05.17 | mdrobnak | I don't think /etc/ppp/ip-up is running |
| 16:06.14 | phh | use the adb force luke. |
| 16:06.24 | mdrobnak | I am |
| 16:06.25 | mdrobnak | :-) |
| 16:07.38 | mdrobnak | Also need to get the permissions of /dev/smd1 and /dev/ppp right |
| 16:07.50 | mdrobnak | as, unlike smodem, pppd runs as "radio" by default, not root. |
| 16:08.00 | mdrobnak | But I think it's a nicer solution in the end. |
| 16:08.31 | phh | <PROTECTED> |
| 16:08.31 | phh | <PROTECTED> |
| 16:08.38 | phh | there is that in the current init.rc |
| 16:08.46 | phh | (no quick and dirty fix at all.)Ã |
| 16:09.38 | mdrobnak | that's not in mine I don't think |
| 16:09.40 | mdrobnak | my permissions are: |
| 16:09.52 | mdrobnak | Oh. |
| 16:09.53 | mdrobnak | Hmm. |
| 16:09.57 | phh | lol |
| 16:10.06 | mdrobnak | Must be /dev/ppp causing the issue then |
| 16:10.16 | mdrobnak | it complains there's no ppp support in the kernel |
| 16:10.18 | mdrobnak | if not run as root |
| 16:10.28 | phh | hehe |
| 16:10.33 | phh | there is no device for such thing afaik |
| 16:10.45 | mdrobnak | crw------- 1 root root 108, 0 Oct 9 23:33 /dev/ppp |
| 16:10.47 | phh | you have to give the process the right "capability" |
| 16:10.49 | phh | oh. ok. |
| 16:11.06 | mdrobnak | :-) |
| 16:11.06 | gekas | goooaaal! |
| 16:11.44 | phh | i guess i'm going to upload it again (only the 4th time.) |
| 16:11.56 | mdrobnak | :-/ |
| 16:12.05 | mdrobnak | Give it a test run on your phone |
| 16:12.07 | phh | well, let's stop uploading until it just work |
| 16:12.10 | phh | . |
| 16:12.21 | phh | windows mobile is longer to boot than the file to upload :p |
| 16:12.35 | phh | (ok maybe not :D) |
| 16:13.18 | mdrobnak | lol |
| 16:13.32 | mdrobnak | Yeah, we all need to make a very light windows rom that boots fast |
| 16:13.40 | mdrobnak | that we can just run haret from |
| 16:14.31 | *** join/#htc-linux Gnutoo (n=gnutoo@host137-159-dynamic.54-79-r.retail.telecomitalia.it) |
| 16:14.58 | phh | kexec would be useful too |
| 16:15.07 | phh | no idea if it can works |
| 16:16.00 | phh | crw------- 1 root root 108, 0 Oct 10 18:15 ppp |
| 16:16.01 | phh | ok. |
| 16:16.03 | phh | i have to reupload |
| 16:16.04 | phh | yeaha. |
| 16:16.30 | phh | mdrobnak: anyway, thanks for pointing the problems :) |
| 16:16.56 | mdrobnak | No problem |
| 16:16.58 | gekas | damn.. anyone looking soccer here? |
| 16:17.03 | gekas | *watching |
| 16:17.23 | mdrobnak | is at home, in front of pc, hacking on the RIL. |
| 16:17.49 | Gnutoo | mdrobnak, for which device? |
| 16:17.58 | mdrobnak | Gnutoo: RAPH |
| 16:18.10 | Gnutoo | mdrobnak, ok thanks |
| 16:18.21 | Gnutoo | I've dream and we lack a good ril |
| 16:18.30 | Gnutoo | s/ril/FLOSS ril |
| 16:18.33 | mdrobnak | I'm trying to do as much as I can without using setupmodem.sh |
| 16:19.11 | mdrobnak | # uptime |
| 16:19.11 | mdrobnak | <PROTECTED> |
| 16:19.11 | mdrobnak | <PROTECTED> |
| 16:19.43 | mdrobnak | Only time PPP has gone down is when I killed rild on purpose. :-) |
| 16:19.48 | phh | mdrobnak: no problem about ppp here |
| 16:19.56 | phh | even if 700 |
| 16:20.09 | mdrobnak | phh: Right, because you're using setupmodem.sh, which is running as root... |
| 16:20.11 | Gnutoo | mdrobnak, can you do telephony + ppp at the same time with your ril? |
| 16:20.15 | phh | mdrobnak: ok |
| 16:20.30 | mdrobnak | Gnutoo: I think so. |
| 16:20.45 | phh | ril just segfaulted :p |
| 16:20.52 | mdrobnak | doh |
| 16:21.13 | mdrobnak | without those lines in /etc/ppp/ip-up? Did you remove it from /initetc/ppp ? |
| 16:21.15 | Gnutoo | mdrobnak, ok what did you change in the reference ril in order to have that? |
| 16:21.30 | mdrobnak | Gnutoo: Need to test it. |
| 16:21.35 | Gnutoo | ok |
| 16:21.42 | phh | mdrobnak: from both initetc and etc |
| 16:22.35 | mdrobnak | Gnutoo: yes, it works, no changes. |
| 16:22.59 | mdrobnak | phh: Sorry to hear. It seems stable to me now. |
| 16:22.59 | Gnutoo | mdrobnak, ok thanks a lot...btw do you have routing during calls |
| 16:23.11 | phh | maybe this build use an old ril |
| 16:23.17 | phh | mdrobnak: do you have a fresh built one ? |
| 16:23.35 | mdrobnak | Gnutoo: Yes, can use speaker or earpiece |
| 16:23.55 | mdrobnak | phh: I have a copy of the current build on my site |
| 16:24.04 | mdrobnak | *current meaning git unmodified |
| 16:24.13 | mdrobnak | http:///www.drobnak.com/libhtcgeneric-ril.so |
| 16:24.45 | mdrobnak | That has the +CIMI patch to get the IMSI, and therefore can get the correct APN settings. |
| 16:25.13 | Gnutoo | mdrobnak, how did you do the routing during calls |
| 16:25.27 | Gnutoo | because routing works for music but not for calls |
| 16:25.39 | mdrobnak | Again, I didn't change that. |
| 16:25.47 | mdrobnak | So that works |
| 16:25.52 | Gnutoo | I can't ear anything if I use earphones when there is an incomminc call |
| 16:25.53 | Gnutoo | ok |
| 16:25.59 | mdrobnak | You should see http://www.github.com/vilord/ |
| 16:25.59 | Gnutoo | thanks a lot |
| 16:26.03 | Gnutoo | I'll try to debug |
| 16:26.10 | mdrobnak | there's a project for android-htc-ril |
| 16:26.20 | mdrobnak | It's *much* bigger then the reference ril |
| 16:26.21 | mdrobnak | but |
| 16:26.38 | mdrobnak | I personally think we should split it into GSM and CDMA RILs |
| 16:26.56 | mdrobnak | there's a bit of extra code in it to handle non-GSM phones |
| 16:27.21 | Gnutoo | ok thanks a lot |
| 16:28.10 | *** join/#htc-linux dcordes (n=luke-g@unaffiliated/dcordes) |
| 16:29.00 | Gnutoo | so maybe if I debug that for US adp phones it could be fine |
| 16:29.16 | mdrobnak | *maybe* |
| 16:29.27 | mdrobnak | So there's stuff missing - like the 2G/3G switch |
| 16:29.34 | mdrobnak | Can't get neighboring cell IDs |
| 16:29.37 | mdrobnak | things like that |
| 16:29.40 | mdrobnak | the advanced stuff |
| 16:29.43 | mdrobnak | isn't implemented |
| 16:29.51 | Gnutoo | ok nether do I |
| 16:30.23 | Gnutoo | so what should I do...try to use the android-htc-ril on the dream? |
| 16:30.37 | mdrobnak | Well, in that case, you should probably take a look at the code. |
| 16:30.38 | Gnutoo | and send back patches if I fix something |
| 16:30.52 | mdrobnak | How far is your 'reference' RIL? |
| 16:31.08 | Gnutoo | not so far...just a bad patch for pin |
| 16:31.13 | Gnutoo | I used +PB_READY |
| 16:31.21 | Gnutoo | instead of the normal thing |
| 16:31.42 | Gnutoo | but when I do: |
| 16:31.45 | mdrobnak | hmm |
| 16:31.51 | Gnutoo | AT+CPIN=0000 |
| 16:31.55 | mdrobnak | give that ril a try then |
| 16:31.56 | Gnutoo | I've +PB_READY |
| 16:31.58 | Gnutoo | that's all |
| 16:32.05 | mdrobnak | weird. |
| 16:32.05 | Gnutoo | no +CPIN* |
| 16:32.11 | Gnutoo | * = regex |
| 16:32.22 | Gnutoo | s/*/.* |
| 16:32.51 | Gnutoo | but the biggest problem is that it's unusable for adp phones |
| 16:34.56 | *** join/#htc-linux mdrobnak (n=mdrobnak@pool-96-246-31-220.nycmny.fios.verizon.net) |
| 16:35.03 | mdrobnak | lol I'm a dumbass. |
| 16:35.13 | mdrobnak | needs to watch where he types reboot |
| 16:35.47 | mdrobnak | I'll be back in like 10 minutes. |
| 16:40.13 | phh | anyway that's a shame 3G works flawlessly in angstrom with a 10lines script, and it doesn't in android ... |
| 16:40.34 | Gnutoo | thanks a lot calling with our ril + headphones work |
| 16:40.37 | Gnutoo | I'll try yours |
| 16:41.43 | Gnutoo | http://pastebin.com/m18b2477 |
| 16:41.49 | Gnutoo | mmm a lot of warnings |
| 16:47.03 | phh | why G1 uses rmnet, while we use pppd to get mobile data connection ? |
| 16:49.16 | *** join/#htc-linux onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
| 16:55.23 | dcordes | phh, it's a shame but it makes sense :) how do you connect in angstrom? |
| 16:55.34 | phh | dcordes: bash ppp.notsh orange orange orange |
| 16:55.35 | dcordes | phh, the old script I used on kaiser doesn't work on kovsky |
| 16:55.36 | phh | it's in /home/root |
| 16:56.08 | dcordes | using the same script/initrd then |
| 16:56.21 | phh | and this script works fine in android. |
| 16:56.36 | phh | i kind of hate that. |
| 16:56.58 | dcordes | the script |
| 16:58.01 | phh | you want me to pastebin it to be sure ? |
| 16:58.11 | dcordes | no I created that initrd |
| 16:58.19 | phh | yeah right :) |
| 16:58.44 | phh | hum, there are some things i have to understand |
| 16:58.48 | phh | 1.why setupmodem.sh uses smd1 |
| 16:58.56 | phh | while the working script uses smd7 |
| 16:59.26 | phh | and the connecting speed is set (by who ?!?) to 115200 |
| 16:59.29 | Captnoord | loads the libhtcgeneric-ril.sointo ida.... |
| 16:59.30 | Captnoord | :P |
| 17:00.14 | Captnoord | but its useless of course |
| 17:00.14 | Captnoord | :P |
| 17:00.53 | Captnoord | yup |
| 17:02.09 | mdrobnak | Oh yeah forogot about that |
| 17:02.11 | mdrobnak | Sorry dude. |
| 17:02.27 | Captnoord | hehe nah its okey |
| 17:02.39 | mdrobnak | So that's how TMobile knows you were on a G1, incidentially |
| 17:02.42 | Captnoord | I wonder if the samsung repo has some ril related stuff |
| 17:02.49 | mdrobnak | if you used dhcp, that was an instant giveaway |
| 17:02.51 | dcordes | phh, use smd7 in the android script? |
| 17:03.12 | phh | dcordes: that's what i'm trying to do |
| 17:04.00 | mdrobnak | Captnoord: Yes, there are a few warnings generated...I'd like to clean that up too eventually.. |
| 17:04.07 | mdrobnak | errrr |
| 17:04.11 | mdrobnak | That was for Gnutoo. |
| 17:04.34 | Gnutoo | mdrobnak, ok but it will work? |
| 17:04.41 | mdrobnak | Well, it works on Raph. |
| 17:04.47 | Gnutoo | ok so I'll give a try |
| 17:04.53 | mdrobnak | But to get the SetupDefaultPDP to work |
| 17:05.00 | mdrobnak | you'll have to replace the smodem code wit the reference code |
| 17:05.04 | Gnutoo | ok |
| 17:05.08 | Captnoord | your hacking in this |
| 17:05.08 | Captnoord | http://android.git.kernel.org/?p=platform/hardware/ril.git;a=summary |
| 17:05.23 | Gnutoo | yes |
| 17:05.28 | mdrobnak | Yes and no. |
| 17:05.38 | mdrobnak | I cloned the android repo at 1.5r3 |
| 17:05.40 | Captnoord | a modded version |
| 17:05.46 | Gnutoo | but the reference one |
| 17:05.55 | mdrobnak | and started with the github.com/vilord/android-htc-ril |
| 17:05.55 | Gnutoo | not the rild |
| 17:06.03 | mdrobnak | it's a library, not the rild |
| 17:07.22 | *** join/#htc-linux paul358 (n=paul@adsl-76-254-28-164.dsl.pltn13.sbcglobal.net) |
| 17:07.35 | mdrobnak | is booting again |
| 17:08.24 | mdrobnak | Android sets up a data connection very early. |
| 17:08.29 | paul358 | does anyone have an opinion on wether the htc hero will be upgradable to android 2.0? |
| 17:09.31 | Captnoord | what for question is that? |
| 17:09.42 | Captnoord | you mean related to the amound of ram it has? |
| 17:09.42 | mdrobnak | is annoyed dns settings arent right |
| 17:09.51 | Captnoord | then fix it |
| 17:09.52 | Captnoord | :P |
| 17:10.46 | mdrobnak | If I knew why :-P |
| 17:11.04 | phh | same here. (but not for the dns, for the whole connection) |
| 17:11.33 | phh | wahou. it launched two pppd at a time |
| 17:11.44 | phh | (and it failed.) |
| 17:12.23 | phh | oh, ril oopsed again :) |
| 17:12.28 | mdrobnak | yikes. |
| 17:12.31 | mdrobnak | hmm: |
| 17:12.34 | mdrobnak | 10-10 13:08:40.663 I/pppd ( 286): primary DNS address 172.16.145.103 |
| 17:12.35 | mdrobnak | 10-10 13:08:40.663 I/pppd ( 286): secondary DNS address 172.16.145.103 |
| 17:12.35 | mdrobnak | 10-10 13:08:40.773 D/MobileDataStateTracker( 126): CONNECTED event did not supply interface name. |
| 17:12.35 | mdrobnak | 10-10 13:08:40.773 D/MobileDataStateTracker( 126): DNS server addresses are not known. |
| 17:12.35 | mdrobnak | 10-10 13:08:40.803 D/GpsLocationProvider( 126): state: CONNECTED apnName: wap.cingular reason: gprsAttached |
| 17:12.50 | phh | mdrobnak: is the debug trace in android of any use for you ? |
| 17:13.32 | mdrobnak | ^^ see above? |
| 17:13.45 | phh | i mean the trace of the seg fault |
| 17:13.53 | mdrobnak | I added in a bunch of code to determine where I was in the RIL to try and track that down. |
| 17:14.03 | mdrobnak | But then I also changed the smodem stuff |
| 17:14.16 | mdrobnak | I could give you a patch with just my debug code additions |
| 17:14.30 | mdrobnak | It's cheezy, but should work :-) |
| 17:14.33 | phh | ok |
| 17:14.40 | mdrobnak | because I have no idea how to trace that crash |
| 17:15.20 | phh | ok |
| 17:15.24 | phh | oops |
| 17:15.29 | phh | are the things in kernel cmdline still useful ? |
| 17:15.49 | mdrobnak | not sure. |
| 17:16.32 | mdrobnak | I'm looking through my patch. Will have it on pastebin in 2 minutes. |
| 17:16.35 | phh | nothing in the ril code, nor in setupmodem.sh |
| 17:18.50 | chemical1979 | do you have a link to get started with adb? would like to help a little bit here. |
| 17:19.31 | phh | download android sdk |
| 17:19.49 | phh | chemical1979: have you seen my post update ? |
| 17:20.04 | chemical1979 | hold on |
| 17:20.36 | phh | meens no i guess. |
| 17:21.07 | chemical1979 | ah, thanks. downloading |
| 17:21.12 | chemical1979 | telecharger = download? :) |
| 17:21.12 | mdrobnak | phh: noticed that too (nothing parsing ppp parameters) |
| 17:21.34 | phh | chemical1979: hu yes why ? |
| 17:21.45 | chemical1979 | I made the experience that updating a post gets lost because one keeps only reading new posts at the end of the thread ;-( |
| 17:22.19 | phh | i don't care, the ones who won't see it are noobs, which won't be of any help anyway |
| 17:22.20 | chemical1979 | because I'm supposed to click on it :) |
| 17:25.49 | mdrobnak | has trouble hand-editing patches |
| 17:26.03 | phh | mdrobnak: you'd better not to do that |
| 17:26.06 | phh | i tried :p |
| 17:26.27 | mdrobnak | lol |
| 17:27.53 | mdrobnak | Fixed one :-) |
| 17:28.43 | mdrobnak | patch seems to have trouble with a blank line at the end of the patch |
| 17:29.23 | mdrobnak | thinks of a good way to fix this. |
| 17:29.27 | mdrobnak | Will have a patch in 5 minutes. |
| 17:29.46 | phh | you apply your patch on a clean branch and then fix the branch and diff it again ? :) |
| 17:32.58 | mdrobnak | something like that |
| 17:34.52 | phh | chemical1979: what's your bitrate on it ? |
| 17:35.14 | Captnoord | mdrobnak: you can make git ignore it |
| 17:35.53 | mdrobnak | Captnoord: not easily |
| 17:36.10 | Captnoord | true.... its fucked when a diff is made on a win git situation |
| 17:36.16 | Captnoord | and applied on a unix git |
| 17:36.23 | Captnoord | same goes for git svn on windows |
| 17:36.29 | Captnoord | very crappy |
| 17:36.31 | Captnoord | hard to maintain |
| 17:36.54 | Captnoord | but last releases make it possible to set line end's per repo |
| 17:36.55 | Captnoord | :D |
| 17:39.20 | mdrobnak | No, it's a fairly invasive patch :-) |
| 17:39.34 | Captnoord | lol |
| 17:39.36 | mdrobnak | Making sure I didn't screw anything up now |
| 17:39.41 | mdrobnak | before I put it up on pastebin |
| 17:39.43 | chemical1979 | 75k/s+ |
| 17:39.47 | Captnoord | can't you use kompare? |
| 17:39.52 | chemical1979 | at 98% right now |
| 17:40.04 | Captnoord | phh: was the upload finished? |
| 17:40.26 | chemical1979 | phh: hahah .. you see? |
| 17:40.34 | chemical1979 | ;) |
| 17:40.34 | phh | chemical1979: speaking about hahah |
| 17:40.38 | phh | i haven't posted the right file :p |
| 17:40.43 | phh | it was http://dl.free.fr/a2A8ty9YB :p |
| 17:40.43 | Captnoord | looool |
| 17:41.03 | chemical1979 | lol |
| 17:41.19 | phh | well |
| 17:41.25 | phh | it won't change anything actually |
| 17:41.29 | phh | data just won't work anyway. |
| 17:41.31 | chemical1979 | ok, starting that one |
| 17:41.49 | phh | i'm trying to fix it, but logcat is flooding me. |
| 17:42.02 | Captnoord | and you can't make a filter for it? |
| 17:42.16 | phh | Captnoord: anyway it doesn't give me the right informations |
| 17:42.27 | phh | mdrobnak: 4.4klines for ril... that seems "fair" |
| 17:42.43 | mdrobnak | heh |
| 17:42.48 | mdrobnak | Ok, done, finally |
| 17:42.57 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 17:43.14 | phh | gimme :) |
| 17:43.30 | phh | but you'll have to explain me how to build that |
| 17:45.29 | mdrobnak | http://www.pastebin.ca/1610395 |
| 17:45.34 | mdrobnak | phh: Do you have the android repo? |
| 17:45.38 | phh | yes |
| 17:46.27 | mdrobnak | ok, do you have a git clone of the android-htc-ril git ? |
| 17:46.41 | phh | yes |
| 17:47.03 | mdrobnak | ok, then just do a git apply patchfile inside of that directory |
| 17:47.17 | mdrobnak | source the envsetup.sh file inside of build |
| 17:47.47 | mdrobnak | then run "mm" inside the RIL directory |
| 17:47.47 | mdrobnak | and it should build |
| 17:47.47 | mdrobnak | brb |
| 17:47.47 | phh | thanks |
| 17:48.44 | phh | git doesn't agree. |
| 17:49.11 | phh | 1610395:9: trailing whitespace. |
| 17:49.11 | phh | 1610395:10: trailing whitespace. |
| 17:49.15 | phh | (1610395 is the filename) |
| 17:49.23 | Captnoord | dude |
| 17:49.35 | Captnoord | get yourself a app that can remove the '\n\r' 's |
| 17:50.04 | phh | doesn't really help |
| 17:50.18 | Captnoord | hmmmm |
| 17:50.18 | phh | errors are 3 lines after :p |
| 17:50.58 | phh | i guess i'll wait |
| 17:51.09 | Captnoord | -ignore-space-change |
| 17:51.17 | Captnoord | --ignore-whitespace |
| 17:51.38 | Captnoord | --inaccurate-eof |
| 17:51.38 | Captnoord | <PROTECTED> |
| 17:52.51 | phh | patch: **** malformed patch at line 587: @@ -1582,6 +1671,7 @@ error: |
| 17:52.54 | phh | i'll wait for mdrobnak. |
| 17:52.57 | phh | let's go eating |
| 17:53.34 | mdrobnak | argh |
| 17:53.53 | *** join/#htc-linux Zinbolic (n=zinbolic@84.238.80.215) |
| 17:53.56 | mdrobnak | who cares about trailing whitespace |
| 17:53.58 | mdrobnak | yeah it's there |
| 17:53.58 | mdrobnak | hehe |
| 17:54.05 | mdrobnak | hold on, screw pastebin |
| 17:54.08 | mdrobnak | I'll upload it to my server |
| 17:54.43 | mdrobnak | http://www.drobnak.com/ril-debug.patch |
| 17:56.02 | mdrobnak | wow, wtf, stupid git made the patch, but can't use it |
| 17:56.03 | mdrobnak | ??!? |
| 17:56.46 | mdrobnak | what a pos |
| 17:56.49 | mdrobnak | one sec |
| 17:59.03 | mdrobnak | Ok, download it from my site. That patch should apply without problems. It'll still complain about whitespace, but screw git. :-D |
| 18:00.22 | Captnoord | its not git related |
| 18:00.28 | Captnoord | its your code related |
| 18:00.36 | Captnoord | I had a similar problem |
| 18:00.54 | Captnoord | git doesn't take the whitespaces at the end into account |
| 18:00.58 | Captnoord | for preformance reasons |
| 18:01.11 | mdrobnak | Its from me deleting /* and */ wihtout deleting the line... |
| 18:02.02 | mdrobnak | Well it was a quick and dirty patch to help get some debug code in there quickly |
| 18:05.51 | Captnoord | one warning left |
| 18:05.51 | Captnoord | :P |
| 18:05.56 | Captnoord | error |
| 18:07.16 | *** part/#htc-linux jedlhl (n=jed@59.167.212.110) |
| 18:07.39 | Captnoord | lol |
| 18:07.39 | mdrobnak | warning: squelched 13 whitespace errors |
| 18:07.39 | mdrobnak | warning: 18 lines add whitespace errors. |
| 18:07.40 | Captnoord | fuckit |
| 18:07.42 | Captnoord | waite of time |
| 18:08.01 | mdrobnak | It still doesn't apply for you? |
| 18:08.19 | Captnoord | nah |
| 18:08.25 | Captnoord | i'm fucking with the pastebin one |
| 18:08.25 | Captnoord | :P |
| 18:08.33 | mdrobnak | oh. download the one from my site lol |
| 18:08.57 | Captnoord | hehe |
| 18:09.16 | Captnoord | hehe |
| 18:09.19 | Captnoord | that one applies |
| 18:09.19 | Captnoord | :P |
| 18:09.20 | Captnoord | I know |
| 18:09.22 | Captnoord | hmmm |
| 18:09.23 | Captnoord | need togo |
| 18:09.25 | Captnoord | fuck fuck fuck |
| 18:09.33 | mdrobnak | is fixing the whitespace problems |
| 18:13.14 | *** join/#htc-linux stickboy (n=anonymou@128.153.211.150) |
| 18:16.39 | mdrobnak | Ok, the uploaded patch file has 0 warnings now :-) |
| 18:17.01 | phh | chemical1979: so ? |
| 18:18.16 | mdrobnak | phh: Try the patch again, let me know.. |
| 18:18.22 | phh | it applies |
| 18:18.37 | mdrobnak | Good :-) |
| 18:18.39 | phh | building |
| 18:19.02 | phh | i'll be able to try fixing wifi and accelerometer now :-) |
| 18:19.08 | Gnutoo | about the ril here's my log: |
| 18:19.10 | phh | /home/phh/AndroidDiamond/android-htc-ril/htcgeneric-ril.c:459: error: 'RIL_PDP_Context_Response' undeclared (first use in this function) |
| 18:19.13 | phh | some missing header ? |
| 18:19.25 | Gnutoo | I/AudioHardwareMSM72XX( 35): Routing audio to Wired Headset + lots of "W/AudioTrack( 35): obtainBuffer timed out (is the CPU pegged?) 0x1f980 user=000023b6, server=00000f4e" |
| 18:19.35 | Gnutoo | instead of routing to earphones |
| 18:19.42 | Gnutoo | so it route it badly |
| 18:19.48 | phh | wired headset != earphones... ? |
| 18:20.16 | mdrobnak | Gnutoo: I get the obtainBuffer timed out when trying to do audio on raph..it's not right on raph. dont know why you're getting it |
| 18:20.32 | Gnutoo | phh, I'll check |
| 18:20.40 | mdrobnak | phh: is AndroidDiamond the top of the repo? |
| 18:20.54 | phh | mdrobnak: no, it's just a folder |
| 18:20.59 | mdrobnak | Ok |
| 18:21.02 | phh | it needs android-htc-ril to be in the repo ? |
| 18:21.03 | mdrobnak | you need to have it set up like this |
| 18:21.09 | phh | ok |
| 18:21.26 | mdrobnak | somewhere/android-repo/hardware/ril/android-htc-ril |
| 18:21.28 | mdrobnak | then do |
| 18:21.37 | mdrobnak | . somewhere/android-repo/buildenv.sh |
| 18:21.48 | mdrobnak | then cd somewhere/android-repo/hardware/ril/android-htc-ril; mm |
| 18:21.54 | mdrobnak | err |
| 18:22.07 | mdrobnak | . somewhere/android-repo/build/envsetup.sh |
| 18:22.07 | Gnutoo | mmm |
| 18:22.11 | Gnutoo | note that: |
| 18:22.18 | Gnutoo | "I/AudioHardwareMSM72XX( 35): Routing audio to Wired Headset *and Speaker*" |
| 18:22.19 | phh | mdrobnak: same thing |
| 18:23.12 | mdrobnak | include/telephony/ril.h |
| 18:23.58 | mdrobnak | phh: You need to have checked out the entire repo :-/ |
| 18:24.03 | phh | i did |
| 18:24.18 | phh | but i haven't the symbols in ril.h |
| 18:24.19 | mdrobnak | weird. you on debian or ubuntu? |
| 18:24.24 | phh | RIL_VERSION==2 |
| 18:24.43 | mdrobnak | include/telephony/ril.h:#define RIL_VERSION 2 |
| 18:24.48 | mdrobnak | weird |
| 18:24.57 | phh | do you have RIL_SIM_READY in it ? |
| 18:25.08 | mdrobnak | yes |
| 18:25.10 | phh | i don't |
| 18:25.19 | mdrobnak | again, I pulled 1.5r3 |
| 18:25.23 | phh | ok |
| 18:25.32 | mdrobnak | you pulled donut, right? |
| 18:25.42 | phh | i pulled head actually |
| 18:25.46 | phh | (yes it's even worster :p) |
| 18:25.50 | mdrobnak | If that's the case, I'll save you the headache and make the debug-only one for you. :-) |
| 18:26.01 | phh | erf |
| 18:26.08 | phh | my target was supposed to be donut :/ |
| 18:26.17 | mdrobnak | Oh. uh. |
| 18:26.20 | mdrobnak | hmm. |
| 18:26.27 | mdrobnak | good point. |
| 18:26.35 | mdrobnak | fun times? |
| 18:26.36 | mdrobnak | lol |
| 18:26.50 | phh | ok :D |
| 18:27.04 | mdrobnak | Not sure how to modify it |
| 18:27.10 | phh | i'll see |
| 18:27.12 | mdrobnak | Hey, I'm kinda shocked the library worked at all.. |
| 18:27.29 | mdrobnak | Maybe you have rild from 1.5? |
| 18:28.39 | mdrobnak | Just in case... http://www.drobnak.com/debug-ril.so |
| 18:29.04 | phh | strings rild isn't really helpful about version |
| 18:29.09 | dcordes | mickey|bbl, ping |
| 18:32.30 | phh | *really* weird |
| 18:32.35 | phh | it still works but no log |
| 18:32.41 | phh | and i replaced the right file and killed rild |
| 18:33.02 | phh | well, i'll see that later |
| 18:33.11 | mdrobnak | you're doing logcat -b radio right? |
| 18:34.51 | *** join/#htc-linux SneakyViper (n=Hatsefla@78-27-5-79.dsl.alice.nl) |
| 18:37.52 | Gnutoo | I've done logcat -b all but I'll try a fix right now |
| 18:38.53 | mdrobnak | Never used all |
| 18:39.05 | mdrobnak | I always startup 2 ... one for main, one for radio |
| 18:40.55 | Gnutoo | all means all things it's not a command |
| 18:40.59 | Gnutoo | radio,main,events |
| 18:41.29 | mdrobnak | I understand |
| 18:41.44 | mdrobnak | I like to keep them separate. Radio has enough stuff on its own :-) |
| 18:42.25 | mdrobnak | All I need to do is fix this DNS issue, and I'm pretty happy with my changes. |
| 18:50.01 | Gnutoo | mdrobnak, they are separate |
| 18:50.07 | Gnutoo | mdrobnak, it's just for telling: |
| 18:50.12 | Gnutoo | [main,radio,events] |
| 18:50.26 | Gnutoo | *it is not a command* |
| 18:50.42 | chemical1979 | phh: first boot starting, created data.img right now |
| 18:50.50 | chemical1979 | before creating, there was: cannot insert wl1251.ko: invalid module format |
| 18:50.52 | chemical1979 | mh |
| 18:52.20 | Gnutoo | chemical1979, what phone,what kenrel and is wl1251.ko an external module? |
| 18:52.47 | Gnutoo | because maybe you need to recompile wl1251.ko too |
| 18:52.51 | chemical1979 | Gnutoo: phhs current babijoee build with wifi and BT |
| 18:53.20 | chemical1979 | DIAM300 |
| 18:53.23 | Gnutoo | ok |
| 18:53.41 | Gnutoo | maybe try file wl1251.ko |
| 18:53.48 | Gnutoo | to see the arch |
| 18:55.04 | chemical1979 | kernel 2.6.27-00539-g946e5ab-dirty |
| 18:56.19 | chemical1979 | if I do find /lib/modules, there are: |
| 18:56.25 | chemical1979 | libcameraservice.so |
| 18:56.28 | chemical1979 | libgps.so |
| 18:56.36 | chemical1979 | libaudio.so |
| 18:56.41 | chemical1979 | libhtcgeneric-ril.so |
| 18:56.48 | chemical1979 | libaudiofinger.so |
| 18:57.43 | luke-jr | wtf? |
| 18:58.44 | Gnutoo | strange....that should not me in modules... |
| 19:13.37 | *** join/#htc-linux xperia (n=chatzill@zux182-249.adsl.green.ch) |
| 19:14.10 | xperia | hello. is here somebody how can help me to resolv that my kernel hangs at the panel init ? |
| 19:14.20 | *** join/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 19:14.43 | *** join/#htc-linux cr2 (n=cr2@109.84.135.209) |
| 19:14.51 | xperia | i have used till yet the blackstone-panel and it worked great |
| 19:15.10 | xperia | but after the newest patches my kernel hangs now |
| 19:16.27 | xperia | i have tryed also the raphael panel board but this dont work now also not ! |
| 19:19.40 | cr2 | tmzt: 6 images in rhod adsp |
| 19:20.50 | chemical1979 | phh: the wl1251.ko can't be loaded from initrd because of "invalid module format". hmm? |
| 19:20.56 | *** join/#htc-linux Marajin_ (n=marajin@87-194-102-189.bethere.co.uk) |
| 19:22.20 | cr2 | phh: h2w is not about audio routing |
| 19:23.49 | chemical1979 | hm. it seems to affect ALL modules from initrd. could it be .. that the zImage is the wrong one? |
| 19:23.54 | cr2 | phh: lol. for gps you will need to write a gpsd android wrapper |
| 19:24.33 | cr2 | phh: to compensate for the closed source damage |
| 19:37.22 | xperia | have to go to check some thing. see you later bye ! |
| 19:37.34 | *** part/#htc-linux xperia (n=chatzill@zux182-249.adsl.green.ch) |
| 19:38.17 | mdrobnak | cr2: Do you know who wrote the setupmodem.sh stuff / set up the initrd for android? |
| 19:39.34 | cr2 | mdrobnak: i'm not an android person. ask in #android ? maybe dzo |
| 19:40.02 | mdrobnak | cr2: I know you're not, but figured you might know ;-) |
| 19:40.12 | cr2 | no |
| 19:40.43 | dzo | i think jesse (vilord) wrote most of it. |
| 19:41.09 | dzo | i did some, but that was a long time ago. |
| 19:41.33 | cr2 | hi dzo |
| 19:41.35 | mdrobnak | Oh, hey dzo. |
| 19:41.43 | dzo | hi, hows things. |
| 19:41.45 | cr2 | dzo: do you have a camera on diamond ? |
| 19:42.20 | dzo | yes, i haven't done anything with diamond for a while, been playing with kaiser & polaris. |
| 19:42.29 | mdrobnak | dzo: Can't seem to get DNS servers set right. That's all that's left..then it should be ok without the smodem stuff. |
| 19:42.39 | cr2 | struggling with understanding the 4Mbit clock setup |
| 19:42.48 | mdrobnak | Aside from, of course, the kernel panic after killing pppd :-( |
| 19:43.14 | dzo | cr2: yes, i never got that working on non-a. |
| 19:43.32 | cr2 | dzo: i've added the reply code to gps rpcs, so the number of magic numbers can be reduced. |
| 19:43.37 | dzo | mdrobnak: still a problem with the smd code i think. |
| 19:44.04 | cr2 | but i still get some 4byte response from calling psdm_get_position() which is never seen on wince |
| 19:44.37 | cr2 | and i never see anything sent by arm9 to my callback servers. |
| 19:44.39 | dzo | would you like me to look at the diam cam? shouldn't be too hard. |
| 19:44.57 | cr2 | dzo: sure., that would be great |
| 19:45.12 | cr2 | i think all the gpios are known (wiki) |
| 19:45.22 | dzo | i think rpc setup is still wrong, have you tried sending a bye and starting from scratch. |
| 19:45.30 | mdrobnak | dzo: Yeah, but under normal circumstances, pppd shouldn't be killed, I don't think, so I'm not worried yet. I had it running all night no problem getting my email. |
| 19:45.35 | cr2 | and samsung kernel has code support for 2 cams |
| 19:46.01 | dzo | where is the samsung kernel? |
| 19:46.07 | cr2 | dzo: i still don't 100% understand the wince rpc setup. |
| 19:46.18 | cr2 | hm.. let me look for a link |
| 19:46.53 | cr2 | GT-I7500_OpenSource.zip |
| 19:47.23 | dzo | i was going to write a bit of code to dump the rpc calls from smem, would that be useful. the smem log is helpful but doesn't tell you everything. |
| 19:47.51 | cr2 | http://img.kr.samsungmobile.com/images/opensource/download/OpenSource/GT-I7500_OpenSource.zip |
| 19:48.08 | cr2 | dzo: i parse them manually ;) |
| 19:49.27 | cr2 | the agps callbacks are scary: they have an int32 array of 111/121 members. |
| 19:49.44 | *** join/#htc-linux toer_ (i=tore@179.81-166-86.customer.lyse.net) |
| 19:49.51 | dzo | i'll try to take another look at it this week, i'm a bit busy so can't promise anything. |
| 19:50.21 | dzo | cr2: are they very different to non-a? |
| 19:50.50 | *** join/#htc-linux BabelO_ (n=fcr@82.238.28.28) |
| 19:50.54 | cr2 | dzo: yes. and all the numbers are different. i've put most of them in wiki |
| 19:51.01 | cr2 | need to add the rest |
| 19:51.34 | cr2 | dzo: the only missing part for the cameras are rpc-conrtolled clocks (also in wiki already) |
| 19:51.51 | dzo | they are probably mostly sat info, probably only a few numbers are important. |
| 19:52.12 | cr2 | we have /dev/smd27 with nmea data |
| 19:52.36 | cr2 | so there is no real need to parse the raw responses |
| 19:52.53 | mdrobnak | is trying a setprop net.dns1 & dns2 hack inside of init.rd..should work |
| 19:53.06 | cr2 | the init is ok, but then i get a freeze in calling the position rpc |
| 19:53.30 | cr2 | can have the same reason as adsp_cid |
| 19:53.42 | cr2 | because wince uses adsp_cid in this part |
| 19:53.49 | *** join/#htc-linux Patrick_Bateman (n=infidel2@unaffiliated/swc666/x-4934821) |
| 19:54.30 | dzo | i can't help i'm afraid, it seems that each new version of amss just makes thing more complex while providing the same functionality. |
| 19:55.39 | cr2 | yeah |
| 19:55.59 | cr2 | we have amss6120 now ;) |
| 19:56.11 | dzo | anyway, got to go now, bye. |
| 19:56.12 | cr2 | with different rpc VERS |
| 19:56.16 | cr2 | bye |
| 19:57.42 | mdrobnak | is happy with DNS now. :-) |
| 19:57.56 | mdrobnak | phh: Set it to OpenDNS in the init.rc and it's fine. |
| 20:00.03 | cr2 | omg |
| 20:00.09 | cr2 | tmzt: https://opensource.motorola.com/sf/sfmain/do/go/rel1290 |
| 20:00.25 | cr2 | 172,72 MB |
| 20:00.39 | mdrobnak | Wow that's kinda huge. |
| 20:00.42 | mdrobnak | What's morrison? |
| 20:00.55 | mdrobnak | That isn't the MotoBlur stuff is it? |
| 20:01.11 | mdrobnak | hmm |
| 20:01.13 | mdrobnak | wonder what's in tehre. |
| 20:01.14 | mdrobnak | *there |
| 20:01.17 | mdrobnak | anyway, got to run. |
| 20:01.21 | cr2 | CLIQ/DEXT something |
| 20:01.36 | cr2 | mdrobnak: it will take some time with my umts link to download it |
| 20:01.49 | cr2 | somebody with a fast link here ? |
| 20:01.50 | mdrobnak | cr2: Ouch. No wired link? |
| 20:01.55 | cr2 | no |
| 20:01.56 | mdrobnak | I have 20mbits :-) |
| 20:02.02 | cr2 | hehe ;) |
| 20:02.14 | mdrobnak | Downloading at 2.2MB/s |
| 20:02.15 | mdrobnak | :-) |
| 20:02.30 | mdrobnak | Do you want to know what's in the archive? |
| 20:02.44 | cr2 | mdrobnak: hmm. i can ssh to a 155mbit linked machine :) |
| 20:02.47 | cr2 | yes |
| 20:02.52 | mdrobnak | :-O |
| 20:02.55 | mdrobnak | That's fast. |
| 20:03.26 | mdrobnak | Almost done. |
| 20:03.34 | cr2 | 32MB here |
| 20:04.05 | mdrobnak | Looks like it's an android + kernel repo snapshot |
| 20:04.19 | cr2 | https://opensource.motorola.com/sf/sfmain/do/viewProject/projects.cliqdext |
| 20:04.29 | mdrobnak | 2MBs of "prebuilt" :-/ |
| 20:04.58 | mdrobnak | I wonder how much of that UI is going to be open? |
| 20:05.36 | cr2 | for qtopia they didn't even want to publish the headers ;) |
| 20:05.46 | mdrobnak | wow |
| 20:05.48 | cr2 | "use java/jsr" ;) |
| 20:06.11 | mdrobnak | Hey, that file has only been downloaded 3 times hehehe |
| 20:06.24 | cr2 | lol |
| 20:06.34 | mdrobnak | Anyway, gotta run for now. Let me know if you find anything interesting in there :-) |
| 20:06.34 | cr2 | somebody + you and me :) |
| 20:06.38 | mdrobnak | yep |
| 20:06.39 | cr2 | ok |
| 20:08.32 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 20:13.49 | *** join/#htc-linux dream_kill (n=nospam@92.56.53.50) |
| 20:14.32 | *** join/#htc-linux stickboy (n=anonymou@128.153.211.150) |
| 20:14.32 | *** join/#htc-linux onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
| 20:16.37 | *** part/#htc-linux rayman18 (i=opera@148.pool85-49-144.dynamic.orange.es) |
| 20:20.53 | *** join/#htc-linux rafyvitto (n=rafyvitt@24.54.253.34) |
| 20:21.39 | rafyvitto | guys using this command on the cmdline "lcd.density=192" whats the best value to match a htc hero screen? 240? |
| 20:22.01 | rafyvitto | resolution i mean |
| 20:22.55 | *** join/#htc-linux Gnutoo (n=gnutoo@host137-159-dynamic.54-79-r.retail.telecomitalia.it) |
| 20:28.10 | *** join/#htc-linux guest1234 (n=guest@bl4-94-71.dsl.telepac.pt) |
| 20:28.51 | *** join/#htc-linux miknix (n=miknix@81.193.94.71) |
| 20:34.55 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 20:38.40 | *** join/#htc-linux rafyvitto (n=rafyvitt@24.54.253.34) |
| 20:44.54 | *** join/#htc-linux c4software (n=Adium@roo49-2-88-161-139-221.fbx.proxad.net) |
| 20:45.00 | c4software | Hi everyone |
| 20:45.00 | c4software | ;) |
| 20:45.06 | tcccp | hiho |
| 20:49.46 | cr2 | lis331dlh ? |
| 20:51.27 | cr2 | moto uses tvenc |
| 20:52.26 | cr2 | is it the same accelerometer as on athena ? |
| 20:53.52 | cr2 | bq27505 |
| 20:53.59 | cr2 | coulomb counter |
| 20:54.10 | cr2 | hmm. the same since himalaya |
| 20:55.18 | phh | chemical1979: you're sure you setted the kernel AND the initramfs from my build ? |
| 20:55.39 | phh | <cr2> phh: h2w is not about audio routing <----- it is needed to know when to switch no ? |
| 20:56.01 | cr2 | headset type detection maybe |
| 20:56.15 | cr2 | h2w is really needed for usb host |
| 20:56.26 | phh | ok |
| 20:56.33 | phh | then codeaurora has h2w ? |
| 20:57.21 | phh | chemical1979: ok i need you. |
| 20:57.22 | cr2 | g1 has h2w |
| 20:57.28 | cr2 | LIS302DL on athena |
| 20:57.47 | phh | well no i can try it by myself |
| 20:58.02 | phh | cr2: what's h2w actually ? |
| 20:58.17 | cr2 | SND revamped on moto |
| 20:58.28 | cr2 | 2wire htc specific protocol |
| 20:58.40 | cr2 | check trout-h2w |
| 20:59.06 | phh | there is only saphire h2w |
| 20:59.10 | cr2 | hehe. they also use uartdm1 |
| 20:59.16 | cr2 | phh: ok |
| 20:59.49 | phh | cr2: audio routing from headset/speaker/thing should be working ? |
| 21:00.58 | cr2 | phh: i think yes |
| 21:01.06 | phh | ok |
| 21:01.30 | cr2 | phh: moto has wifi too |
| 21:01.41 | phh | let's try with playwav then |
| 21:01.47 | phh | cr2: using ti's wilink driver i guess ? |
| 21:01.54 | cr2 | looking |
| 21:02.11 | cr2 | phh: try to do what mblancom did on blac100 |
| 21:02.30 | cr2 | change the dev= in rpc selector |
| 21:02.38 | cr2 | and look where the sound comes out |
| 21:02.47 | cr2 | but i think our setup is ok |
| 21:02.48 | phh | ok |
| 21:03.08 | cr2 | but other phones have a wild variety here |
| 21:03.21 | cr2 | even blac100 does not have dev=1 |
| 21:04.45 | cr2 | moto has camera config |
| 21:05.19 | cr2 | phh: it seems that we will end with an android rom for 100% hw support, |
| 21:05.30 | cr2 | and a secure free-software rom :) |
| 21:05.35 | *** join/#htc-linux onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
| 21:06.21 | cr2 | secure, as much as it is possible with the big arm9 brother |
| 21:06.36 | gekas | cr2 can you explain that to me? |
| 21:08.18 | cr2 | gpu0 is CONFIG_MSM_STACKED_MEMORY... |
| 21:08.27 | cr2 | gekas: ? |
| 21:08.53 | cr2 | sfh7743 proximity sensor |
| 21:09.04 | gekas | [23:04] <cr2> phh: it seems that we will end with an android rom for 100% hw support, [23:05] <cr2> and a secure free-software rom :) |
| 21:10.54 | c4software | on diam/raph acctual driver have the init code ? or its use the init of wm ? |
| 21:11.45 | cr2 | gekas: i'm pretty sure that we will have 100% hw support soon |
| 21:12.48 | cr2 | gekas: arm9 is the real hw control chip. for example you can't just mute the mic. you need to send an rpc/dex call to arm9, and it will decide |
| 21:13.20 | gekas | ah, ok |
| 21:13.43 | cr2 | so you don't really control the hardware on this phone |
| 21:14.23 | cr2 | disassembling and modifying amss is a different project |
| 21:15.30 | gekas | and which one is the bigger project? ;) |
| 21:15.40 | cr2 | amss |
| 21:16.08 | gekas | okay |
| 21:16.09 | cr2 | using ti calypso chip is better anyway |
| 21:16.16 | cr2 | for such a project |
| 21:16.20 | gekas | can you guess what would "soon" be in weeks/months? |
| 21:16.29 | cr2 | because it's simplier, and there are leaked docs. |
| 21:16.54 | gekas | ti = texas instruments? |
| 21:17.12 | cr2 | i would certainly like to look at the DSP processing gps on msm. |
| 21:17.15 | cr2 | yes |
| 21:17.28 | cr2 | used by older htc phones. and by moko1/2 |
| 21:17.39 | gekas | k |
| 21:18.19 | cr2 | i think dzo will make (main) camera work really soon |
| 21:18.40 | cr2 | then we only have gps as a showstopper |
| 21:18.47 | c4software | @cr2 on amss ? Any news for sharp panel ? |
| 21:19.36 | cr2 | c4software: merge the panel detection code from raph to diam panel code, and switch to sharp ? |
| 21:19.42 | cr2 | if your panel is sharp |
| 21:20.18 | c4software | My panel is a sharp, dzo have made some change on panel code for diam but. right now the backlight is turned off but not the screen. |
| 21:20.42 | cr2 | afair there is no panel detection code on diam |
| 21:21.28 | cr2 | we need to merge the raph/diam panel code some time, but raph needs the epson support too. |
| 21:21.46 | c4software | hmm okay |
| 21:22.09 | c4software | you think, the panel support problem its just due to an non detection of it ? |
| 21:22.23 | cr2 | gekas: if everybody will sit and wait, it can take some time to finish the project. |
| 21:24.12 | cr2 | the moto kernel code is really a dirty hack |
| 21:24.24 | cr2 | but it's hardly news. |
| 21:24.30 | cr2 | on a780 it was the same |
| 21:25.25 | gekas | cr2: i doubt that there is something i can help with =/ |
| 21:27.20 | cr2 | they use bcm wlan |
| 21:27.43 | cr2 | gekas: do you know wince programming ? |
| 21:28.21 | cr2 | phh: seems like it's broadcomm, not ti for wifi |
| 21:29.03 | gekas | i know java.. the parts that i have to know as a student of business informatics ;) |
| 21:29.14 | cr2 | ok |
| 21:29.46 | gekas | phph, html, javascript are not of interest i guess ;) |
| 21:29.49 | gekas | *php |
| 21:30.11 | cr2 | moto messes with ebi1 clock. fun. |
| 21:30.28 | cr2 | gekas: asm/c for linux and c/c++ for wince |
| 21:30.52 | gekas | i´m not bad at learning new things, but due to the semester abroad that i´m currently in, my time is limited.. |
| 21:30.59 | phh | <cr2> gekas: i'm pretty sure that we will have 100% hw support soon <----- it seems i'm the only one motivated for "extra" features on android and err well |
| 21:31.01 | phh | i'm not really. |
| 21:31.39 | cr2 | phh: i may join you, only to show that we can support a phone 100% |
| 21:31.57 | cr2 | but i need working gps first. |
| 21:32.11 | cr2 | and to finish the panel suspend/resume |
| 21:32.28 | phh | well, claiming 100% support would be awesome :) |
| 21:32.37 | cr2 | yes |
| 21:32.57 | phh | what would be even better would be 110% |
| 21:32.58 | phh | like usb host :D |
| 21:33.09 | cr2 | watching all the cuckoo egss put by google, i'll really enjoy it. |
| 21:33.27 | cr2 | yeah. and tvout. and fm radio :) |
| 21:33.52 | phh | fm radio won't be part of the 10 extra percent, RDS will |
| 21:34.04 | cr2 | TMC |
| 21:34.08 | phh | yes |
| 21:35.15 | gekas | [23:30] <cr2> gekas: asm/c for linux and c/c++ for wince <-- all not really java-related, aren´t they? |
| 21:36.05 | cr2 | gekas: i don't think c++ and java are that far away |
| 21:36.24 | gekas | thats true |
| 21:36.31 | cr2 | you only need to give up the silly idea that somebody else can do better memory management than you |
| 21:37.43 | gekas | :D |
| 21:38.15 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 21:38.18 | cr2 | haha. they run mddi at 82Mhz. |
| 21:38.22 | cr2 | to save power |
| 21:38.26 | phh | oO |
| 21:38.56 | phh | cr2: btw, do you know why G1 uses rmnet for internet connection, and not us ? |
| 21:39.08 | cr2 | i think we were running it at pll0 =245MHz evertually :) |
| 21:39.16 | phh | ouch ok |
| 21:39.26 | cr2 | phh: because they have different amss |
| 21:39.38 | phh | ok so no way to use rmnet |
| 21:39.40 | phh | :( |
| 21:39.50 | cr2 | phh: all wince amss use stream smd only, and ppp only |
| 21:39.54 | cr2 | no |
| 21:39.54 | phh | ok |
| 21:40.34 | cr2 | phh: the toshiba can 200MHz, says codeaurora kernel :) |
| 21:40.39 | cr2 | max |
| 21:40.52 | cr2 | but it was working @245 for us. |
| 21:41.05 | cr2 | epson could not :) |
| 21:41.36 | phh | i'm doing some maths.... how useful is 200MHz ? :D |
| 21:42.11 | cr2 | you waste power |
| 21:42.20 | phh | and anything else ? :) |
| 21:42.34 | cr2 | moving fb to smi is a better idea. on non-android defconfig |
| 21:42.43 | phh | how to debug my phone when i need ext usb power ? through 3G \o/ |
| 21:42.57 | phh | the ssh goes something like 600km i think |
| 21:42.58 | chemical1979 | phh: sorry for the delay |
| 21:43.02 | gekas | cr2: i guess i´d first have to "learn" asm/c/c++, before i could be a help for you guys... probably a prohejtc like this is not meant to learn the language it´s written in |
| 21:43.03 | phh | while my computer and my phone are 1m away :D |
| 21:43.15 | phh | chemical1979: no problem |
| 21:43.40 | cr2 | phh: i doubt that i can ssh over umts. |
| 21:43.42 | c4software | Made a "rom" on Diam/raph its a little bit complicated no ? you have to made all init code for all parts of phone ? and this job its not do acctualy no ? |
| 21:43.45 | phh | cr2: i can :p |
| 21:43.54 | cr2 | it's firewalled to death. i can't even smtp |
| 21:44.02 | phh | cr2: ho i can't smtp either. |
| 21:44.05 | phh | everything is unlimited |
| 21:44.06 | cr2 | on port25 at least |
| 21:44.09 | phh | but pop3/smtp/imap. |
| 21:44.16 | phh | i can do SIP or whatever |
| 21:44.37 | cr2 | you can try to portscan my ip :) |
| 21:44.58 | phh | err no |
| 21:45.48 | phh | and ssh isn't laggy at all |
| 21:46.03 | phh | while it does the way twice i think (ssh is encapsulated in an ssh tunnel /o\) |
| 21:46.13 | chemical1979 | ok I guess you don't need me anymore *g* |
| 21:46.21 | chemical1979 | afk |
| 21:46.32 | phh | chemical1979: well i'm trying to understand your error |
| 21:46.37 | phh | but i can't see how this is possible ... |
| 21:47.25 | chemical1979 | for me it looked like i've referenced the wrong initrd in the startup.txt, but it was correct |
| 21:47.40 | phh | both your kernel and initramfs is good ? |
| 21:47.44 | cr2 | 3100ffff is RPC_ROUTER_SERVER_PROGRAM CB |
| 21:48.06 | phh | cr2: playwav can play mp3 ? |
| 21:48.20 | phh | ho only mp3 or wav ok |
| 21:48.21 | cr2 | phh: yes |
| 21:48.45 | phh | i was trying m3a |
| 21:48.46 | phh | m4a* |
| 21:48.51 | cr2 | you may add acc and wma like on codeaurora |
| 21:48.58 | cr2 | maybe our dsp will play them too |
| 21:49.12 | cr2 | s/acc/aac/ |
| 21:50.53 | cr2 | they use codeaurora rpc_router code |
| 21:51.03 | cr2 | much more debugging options |
| 21:51.06 | chemical1979 | phh: I'll come back to you later, sry |
| 21:51.15 | phh | chemical1979: ok |
| 21:54.34 | phh | audio routing works and seems correct for the three firsts entries |
| 21:54.45 | phh | for BT, i guess it will be a lot harder. |
| 21:56.27 | phh | so i have to understand how android decides to switch. |
| 21:59.18 | *** join/#htc-linux dilinger (n=dilinger@dhcp-18-111-44-112.dyn.mit.edu) |
| 21:59.22 | cr2 | phh: BT is dev=3 |
| 21:59.35 | cr2 | phh: i doubt that we need the rest. |
| 21:59.37 | phh | i know, but how do we say to big brother what to do ? |
| 22:00.05 | cr2 | the android does not lookup the dev by SND name ? |
| 22:00.22 | phh | big brother =arm 9 :p |
| 22:00.34 | cr2 | last time i've looked at the android source, a lot of numbers/paths were simply hardcoded |
| 22:00.42 | phh | it still is. |
| 22:01.04 | cr2 | ttyHS0 for bt too ? |
| 22:01.19 | cr2 | no msm7201A phone uses ttyHS0, btw. |
| 22:01.29 | cr2 | htc wince phone |
| 22:01.31 | phh | it's MSM0 i know |
| 22:01.38 | phh | the only reference i've seen MSM0 currently is init.rc |
| 22:01.40 | cr2 | MSM0 is uart |
| 22:01.41 | phh | for hciattach |
| 22:02.05 | cr2 | we (may) need it only with h2w |
| 22:02.09 | cr2 | but i doubt it. |
| 22:02.12 | *** join/#htc-linux [1]Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 22:02.21 | phh | to do what ? |
| 22:02.30 | cr2 | phh: you must be really hardcore to use MSM* |
| 22:02.50 | cr2 | serial console, kernel debugger et al. |
| 22:03.00 | phh | MSM0 is used for BT on things i've seen |
| 22:03.13 | cr2 | not on our phones |
| 22:03.17 | phh | no |
| 22:04.14 | cr2 | ? |
| 22:04.32 | cr2 | MSM0 is uart1 |
| 22:04.56 | phh | i confirmed it was not on our phones |
| 22:05.14 | cr2 | BT uses HS1 for all wince msm7201a htc phones |
| 22:05.35 | cr2 | HS1 aka uart2dm |
| 22:05.46 | cr2 | uart2 != uart2dm |
| 22:06.07 | cr2 | uart2 not used on any known phone anyway |
| 22:06.48 | cr2 | we may support uart1 aka MSM0, but it is really not worth the pain |
| 22:07.16 | cr2 | because we need to fix h2w driver for it. |
| 22:07.36 | cr2 | and it's just a normal serial console. |
| 22:07.43 | cr2 | has nothing to do with BT |
| 22:08.10 | cr2 | you need to solder on extusb to use it too. |
| 22:08.50 | cr2 | if android has MSM0 hardcoded, then android sucks. big surprise. |
| 22:09.35 | phh | ho, surprising comment in source code: |
| 22:09.37 | phh | <PROTECTED> |
| 22:16.01 | *** join/#htc-linux thedicemaster2 (n=thedicem@j89051.upc-j.chello.nl) |
| 22:25.46 | *** join/#htc-linux FR^2 (n=frquadra@frquadrat.de) |
| 22:27.14 | gekas | cu guys |
| 22:36.58 | *** join/#htc-linux dilinger (n=dilinger@dhcp-18-111-44-112.dyn.mit.edu) [NETSPLIT VICTIM] |
| 22:36.58 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux toer_ (i=tore@179.81-166-86.customer.lyse.net) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux maejrep (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux Sti_0239 (n=Where_is@47.249-246-81.adsl-dyn.isp.belgacom.be) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) |
| 22:36.59 | *** join/#htc-linux PoohbaLT1 (n=BlkPoohb@c-69-141-71-249.hsd1.nj.comcast.net) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux droid001 (n=g1@p4FDCED66.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux Bry8Star (n=Bry8Star@99.146.38.0) [NETSPLIT VICTIM] |
| 22:36.59 | *** join/#htc-linux Miek (n=mike@unaffiliated/mikechml) [NETSPLIT VICTIM] |
| 22:37.11 | phh | cr2: gpios concerning camera are 91/92/93 ? |
| 22:37.12 | phh | +107/109 ? |
| 22:37.54 | phh | said otherway: the "cif" thing in raphaelgpio's wikipage, is the camera? |
| 22:57.44 | NexVision | cr2 u back |
| 23:04.48 | *** join/#htc-linux cr2 (n=cr2@ip-109-84-135-209.web.vodafone.de) |
| 23:11.10 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
| 23:26.51 | tmzt | h2w dor usb host? |
| 23:26.55 | tmzt | why? |
| 23:27.51 | tmzt | moto kernel? |
| 23:28.42 | tmzt | morrison is a different phone |
| 23:28.51 | tmzt | anything for sholes yet? |
| 23:30.13 | tmzt | cr2: I have no nmea at all |
| 23:30.19 | tmzt | so I need the rpc code |
| 23:33.08 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
| 23:36.33 | tmzt | 06:31 < Gnutoo> "I/AudioHardwareMSM72XX( 35): Routing audio to Wired Headset *and Speaker*" |
| 23:37.05 | tmzt | ril can be built standalone now? |
| 23:51.02 | tmzt | mro: two qustions then |
| 23:51.13 | tmzt | what ddwrt version? |
| 23:51.37 | tmzt | and for fios, what is the difference bwteen MPON and GPON? |