| 00:04.27 | *** join/#htc-linux paran (n=paran@cust.fiber-lan.snet.lk.212.214.112.112.visit.se) |
| 00:20.28 | MrPippy | is there anyone running dzo's latest zImage who can test something for me? |
| 00:24.49 | dzo | i am! |
| 00:25.19 | *** join/#htc-linux stickboy (n=anonymou@128.153.180.178) |
| 00:28.24 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) |
| 00:28.25 | MrPippy | haha, i'm trying to build a wlan.ko to integrate into an android build, but i'm not sure if it'll load on your kernels |
| 00:29.07 | dzo | it will if you compile it against the same kernel. |
| 00:29.27 | dzo | you need to know the wifi gpio and put in in esta_drv.c |
| 00:29.54 | dzo | and get the rfkill stuff working. |
| 00:30.28 | dzo | i can't help much, don't have wifi on my diamond. |
| 00:34.07 | MrPippy | is the 13-09-09 diamond zImage built from this tree? "Improve power collapse and allow ram console to start earlier." 8096385253759cbcbdfe6783178f6d3e799523a5 |
| 00:34.19 | dzo | yes |
| 00:34.27 | mdrobnak | Hey all. |
| 00:34.51 | mdrobnak | What needs to be done, I'm assuming in HaRET, to get the additional RAM working on the RAPH devices? |
| 00:35.00 | dzo | hi mdrobnak, i pushed your ril changes to git but haven't had time to test it. |
| 00:35.07 | mdrobnak | I feel that's the next area of pain. |
| 00:35.18 | mdrobnak | Yes, I saw. Very cool. Thanks for the credit. |
| 00:35.54 | dzo | nothiothing needed in haret, in the board file you need to change the fixup code |
| 00:36.34 | dzo | probably just the size and/or offset is wrong. |
| 00:36.58 | mdrobnak | Well, I guess, how do we figure that out, is what I'm asking. |
| 00:38.04 | dzo | where is the 2nd bank in phys memory? |
| 00:38.22 | dzo | and when does it crash if you enable it. |
| 00:38.52 | mdrobnak | If I take off the Mem=76, Android doesn't boot. |
| 00:38.54 | mdrobnak | That's the issue. |
| 00:39.04 | mdrobnak | How do I determine where the 2nd bank is? |
| 00:39.23 | mdrobnak | Thats why I figured it would be done in Haret, something must note it somewhere, no? |
| 00:39.41 | dzo | ok so it's not even using the first bank then. probably the first bank size is wrong. |
| 00:40.19 | dzo | try making it 76M rather than 89 |
| 00:41.16 | mdrobnak | ? It is 76 now. Do you mean to try 89? |
| 00:41.43 | dzo | no, i mean in the board file change the size of the first bank to 76M |
| 00:42.10 | dzo | in htccccraphael_fixup |
| 00:42.18 | mdrobnak | <PROTECTED> |
| 00:42.20 | mdrobnak | That line, right? |
| 00:42.43 | mdrobnak | to- 76 * 1024 * 1024 |
| 00:43.04 | dzo | yes, looks like the 2nd bank is enabled though. |
| 00:43.25 | mdrobnak | Yeah I just am looking at that - maybe the address is wrong? |
| 00:44.04 | mdrobnak | It matches what's in the .h file |
| 00:44.06 | dzo | check in haret if it's at 0x20000000 |
| 00:45.10 | mdrobnak | set ramsize 0x6000000 |
| 00:45.10 | mdrobnak | set ramaddr 0x10000000 |
| 00:45.37 | dzo | thats the first bank, get rid of those. |
| 00:46.29 | mdrobnak | That's interesting, becuase that seems to be the address of the 2nd bank according to the fixup code.. |
| 00:46.42 | mdrobnak | <PROTECTED> |
| 00:46.42 | mdrobnak | <PROTECTED> |
| 00:46.42 | mdrobnak | <PROTECTED> |
| 00:46.42 | mdrobnak | <PROTECTED> |
| 00:46.42 | mdrobnak | <PROTECTED> |
| 00:49.59 | mdrobnak | Should I set the first bank to 76 and leave the 2nd one enabled? |
| 00:55.12 | *** join/#htc-linux ethen (n=ethen@24.54.253.34) |
| 00:57.05 | dzo | yes, perhaps try changing the size of the second bank. it might not all be available. |
| 00:58.16 | mdrobnak | Hmm. 76 + 128, removal of those two set commands in Haret - no boot. |
| 00:58.22 | mdrobnak | removed mem=76 |
| 01:02.07 | mdrobnak | Tried twice, no go. Going to put back the set commands. |
| 01:08.02 | mdrobnak | Matthew-Drobnaks-EP35-DS3L:~ mdrobnak$ adb shell |
| 01:08.02 | mdrobnak | # free |
| 01:08.02 | mdrobnak | <PROTECTED> |
| 01:08.02 | mdrobnak | <PROTECTED> |
| 01:08.02 | mdrobnak | <PROTECTED> |
| 01:08.02 | mdrobnak | Total: 269032 75368 193664 |
| 01:08.08 | mdrobnak | Now lets see if Android boots. :-/ |
| 01:08.18 | mdrobnak | Nope. Black screen. No animation. |
| 01:08.25 | mdrobnak | and it's dead. |
| 01:09.57 | mdrobnak | Trying 76 + 96 |
| 01:16.36 | mdrobnak | :-/ Same deal. As soon as SurfaceFlinger starts, and it tells the display specs..that's it. |
| 01:18.59 | mdrobnak | I'm trying with just bank 1 now. |
| 01:19.03 | mdrobnak | 96M. |
| 01:19.06 | mdrobnak | err 89M |
| 01:22.27 | *** join/#htc-linux ivanmmj (n=ivan@65.41.147.247) |
| 01:22.28 | *** join/#htc-linux stickboy (n=anonymou@128.153.180.178) |
| 01:22.38 | ethen | mdrobnak i belive in you make,,,you...can..dooooo....it! |
| 01:22.44 | ethen | xD |
| 01:22.47 | ethen | mate* |
| 01:22.50 | ethen | LOLLL |
| 01:22.52 | mdrobnak | lol |
| 01:25.07 | mdrobnak | Ok |
| 01:25.12 | mdrobnak | 89MB boots. |
| 01:25.33 | mdrobnak | So I gained 13MBs of RAM. LOL |
| 01:26.10 | dzo | mdrobnak: try moving all the pmem into the 2nd bank, just change mdp_base to 0x27000000 |
| 01:27.16 | mdrobnak | dzo: Which file? |
| 01:27.23 | dzo | raph.h |
| 01:27.38 | dzo | board-htcraphael.h |
| 01:28.30 | mdrobnak | scratches head. |
| 01:28.49 | dzo | line 25 |
| 01:29.07 | mdrobnak | There's EBI_BASE, Then MSM_LINUX_BASE, then MDP_BASE which is based off linux.. |
| 01:29.21 | dzo | change mdp_base |
| 01:29.34 | mdrobnak | What about the size? |
| 01:29.39 | dzo | leave |
| 01:30.09 | mdrobnak | k |
| 01:30.19 | mdrobnak | making.. |
| 01:30.23 | dzo | actually 0x270 is too small, try 0x24000000 |
| 01:30.40 | dzo | and make the 2nd bank 64M |
| 01:30.55 | *** join/#htc-linux thedicemaster (n=thedicem@24.132.89.51) |
| 01:31.18 | dzo | pmem needs 26M |
| 01:31.53 | mdrobnak | Ok, so you're saying to re-enable the 2nd bank and set to 64 as well. |
| 01:31.53 | mdrobnak | k |
| 01:32.02 | mdrobnak | (inc 0x24..) |
| 01:32.05 | dzo | yes |
| 01:32.10 | mdrobnak | k |
| 01:32.54 | mdrobnak | I'm still on a slightly older git, btw, haven't updated to the latest changes. |
| 01:33.10 | mdrobnak | But I heard that could be problematic anyway because of power saving issues.. |
| 01:35.13 | mdrobnak | I have noticed sometimes the navipad doesn't work if you hook up usb. |
| 01:39.56 | mdrobnak | no fb handover. trying again. |
| 01:41.29 | mdrobnak | ok |
| 01:41.51 | mdrobnak | got logcat going, lets see if it goes |
| 01:41.59 | mdrobnak | ITS BOOTING |
| 01:42.19 | mdrobnak | Matthew-Drobnaks-EP35-DS3L:~ mdrobnak$ adb shell |
| 01:42.19 | mdrobnak | # free |
| 01:42.19 | mdrobnak | <PROTECTED> |
| 01:42.19 | mdrobnak | <PROTECTED> |
| 01:42.19 | mdrobnak | <PROTECTED> |
| 01:42.20 | mdrobnak | Total: 217216 54312 162904 |
| 01:42.27 | mdrobnak | crap. |
| 01:42.41 | mdrobnak | It crashed. |
| 01:42.55 | mdrobnak | Matthew-Drobnaks-EP35-DS3L:~ mdrobnak$ adb shell |
| 01:42.56 | mdrobnak | # free |
| 01:42.56 | mdrobnak | <PROTECTED> |
| 01:42.56 | mdrobnak | <PROTECTED> |
| 01:42.56 | mdrobnak | <PROTECTED> |
| 01:42.56 | mdrobnak | Total: 217216 54312 162904 |
| 01:42.58 | mdrobnak | err |
| 01:43.03 | mdrobnak | I/SystemServer( 135): Starting Alarm Manager. |
| 01:43.04 | mdrobnak | I/SystemServer( 135): Starting Sensor Service. |
| 01:43.04 | mdrobnak | W/HAL ( 135): load: module=/system/lib/hw/sensors.htc.so error=Cannot find library |
| 01:43.06 | mdrobnak | I/SystemServer( 135): Starting Window Manager. |
| 01:43.08 | mdrobnak | I/EventHub( 135): New device: path=/dev/input/event3 name=microp-keypad id=0x10000 (of 0x1) index=1 fd=53 classes=0x3 |
| 01:43.11 | mdrobnak | That's the last few lines. |
| 01:43.21 | dzo | what about dmesg |
| 01:43.44 | mdrobnak | yeah didn't get that. |
| 01:43.49 | mdrobnak | I'll reboot. |
| 01:44.26 | dzo | from haret do pwf kdmesg 0xe0000 0x20000 to get the dmesg |
| 01:45.02 | mdrobnak | I have to telnet to port 9999 to get that right? |
| 01:45.21 | mdrobnak | I may have to get my linux laptop for this.. |
| 01:45.51 | mdrobnak | brb |
| 01:49.11 | mdrobnak | Ok, got a Debian 5 laptop |
| 01:50.21 | mdrobnak | ok, got Haret. |
| 01:51.10 | mdrobnak | Ok, that did nothing. |
| 01:56.43 | mdrobnak | dzo, you still there? |
| 02:02.25 | mdrobnak | Too much RPC debug after boot.. Tried to get a dmesg, but missed first 3 seconds.. |
| 02:04.09 | mdrobnak | I'm pasting what I got to pastebin, then I'm off to sleep. |
| 02:05.36 | mdrobnak | http://pastebin.ca/1567820 |
| 02:12.48 | mdrobnak | Sleep calls. Will try to do more tomorrow. |
| 02:13.13 | tmzt | mdrobnak: which device do you have? |
| 02:13.44 | tmzt | dzo: ah, that could be it, I'm not configuring bank2 at all |
| 02:14.05 | ethen | he has a raph110 |
| 02:14.52 | mdrobnak | raph110 |
| 02:14.53 | mdrobnak | yep |
| 02:15.01 | tmzt | ok |
| 02:15.10 | tmzt | different layout then raph100 then? |
| 02:15.19 | mdrobnak | Should be the same I thought> |
| 02:17.13 | tmzt | oh, I broke raph800 |
| 02:17.16 | tmzt | sorry |
| 02:17.58 | tmzt | <PROTECTED> |
| 02:18.01 | tmzt | #if 1 |
| 02:18.04 | tmzt | <PROTECTED> |
| 02:18.12 | tmzt | if there's not a good way to do that can we do per mtype fixups? |
| 02:18.37 | mdrobnak | no idea. |
| 02:18.46 | tmzt | (for raphael of course, let dzo's diam alone) |
| 02:18.46 | mdrobnak | how did you break raph800? |
| 02:18.52 | tmzt | sorry to keep you awake |
| 02:18.56 | mdrobnak | it's ok. |
| 02:19.04 | mdrobnak | As it turns out I'm on the phone helping someone anyway |
| 02:19.05 | mdrobnak | hehe |
| 02:19.06 | tmzt | I added a seperate fixup for it then took the body out of it |
| 02:19.46 | tmzt | I don't have commit access to fix it |
| 02:20.13 | tmzt | wm says raph500 has 113.29mb ram |
| 02:20.38 | tmzt | ram size 192 |
| 02:20.57 | ethen | you running a stock rom? |
| 02:21.02 | *** join/#htc-linux madCoder- (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) |
| 02:21.09 | tmzt | if bank 0 is 89 then bank 1 has to be 94 |
| 02:21.13 | tmzt | hey! |
| 02:21.30 | tmzt | ethen: what does that matter? this is a hardware thing |
| 02:21.31 | tmzt | hardware |
| 02:21.55 | tmzt | oh, program memory |
| 02:21.57 | tmzt | yeah, stock |
| 02:22.52 | ethen | i just said cause deppending the roms PP, depending how much free ram on WM, but you know that xD |
| 02:23.03 | tmzt | yeah |
| 02:23.06 | tmzt | PP? |
| 02:23.14 | tmzt | page pool |
| 02:23.16 | tmzt | got it |
| 02:23.26 | tmzt | but I care about the hardware banks right now |
| 02:23.29 | tmzt | and smi/ebi |
| 02:24.09 | tmzt | okay, I'm going to try 94 |
| 02:24.09 | mdrobnak | sorry |
| 02:24.10 | ethen | yeah , my bad though you were reffering to software available ram |
| 02:24.12 | ethen | lol |
| 02:24.15 | tmzt | no, that's ok |
| 02:24.32 | tmzt | I was just asking ce if it know what the hardware it was rrunning on was capable of |
| 02:24.35 | mdrobnak | ok, so if you look, I tried a few different tries before |
| 02:24.40 | tmzt | since I know I don't have 256mb |
| 02:24.45 | tmzt | on raph110? |
| 02:24.48 | tmzt | I'm on cdma |
| 02:25.01 | tmzt | ok, too tired to read good tonigt |
| 02:26.05 | tmzt | + mi->nr_banks++ |
| 02:26.06 | tmzt | + mi->bank[1].start = PAGE_ALIGN(PHYS_OFFSET); |
| 02:26.06 | tmzt | + mi->bank[1].node = PHYS_TO_NID(mi->bank[1].start); |
| 02:26.06 | tmzt | + mi->bank[1].size = (94 * 1024 * 1024); |
| 02:26.16 | tmzt | mdrobnak: can you expalin what dzo said about mdp? |
| 02:26.24 | mdrobnak | not really :-D |
| 02:26.53 | tmzt | ok, I'll try then reading it |
| 02:27.16 | mdrobnak | Sorry, he was talking about moving everything into bank 2 |
| 02:27.17 | tmzt | oh, he used VRAM? |
| 02:27.21 | mdrobnak | and modified the MDP base or something |
| 02:27.32 | *** join/#htc-linux pitillo (n=pitillo@84.123.96.129.dyn.user.ono.com) |
| 02:27.51 | tmzt | bunch of errrors from cr2 code |
| 02:27.53 | mdrobnak | All I know is it got much further |
| 02:28.03 | tmzt | <PROTECTED> |
| 02:28.03 | tmzt | arch/arm/mach-msm/qdsp5/adsp_6150.c:107: error: 'QDSP_MODULE_VIDEOENCTASK' undeclared here (not in a function) |
| 02:28.10 | tmzt | I hadn't tried building that amss version before |
| 02:28.16 | mdrobnak | but still froze right after showing the android logo |
| 02:28.24 | mdrobnak | vs before it would freeze before showing anything |
| 02:28.31 | tmzt | I'm using angrstrom |
| 02:28.52 | tmzt | somehow, redefinition of 'qdsp_qtv_lp_queue_offset_table' |
| 02:29.01 | tmzt | arch/arm/mach-msm/qdsp5/adsp_6150.c:182: error: previous definition of 'qdsp_qtv_lp_queue_offset_table' was here |
| 02:31.30 | mdrobnak | I'm glad I haven't updated to the latest git :-D |
| 02:31.39 | tmzt | it won't affect you |
| 02:31.51 | mdrobnak | Well, someone said some power stuff was broken for RAPH |
| 02:31.51 | tmzt | actually it's better if you do |
| 02:31.56 | tmzt | the ext thing is fixed |
| 02:32.00 | tmzt | ext_ |
| 02:32.02 | mdrobnak | ext? |
| 02:32.08 | tmzt | read the log |
| 02:32.11 | tmzt | git log |
| 02:32.12 | mdrobnak | lol |
| 02:32.15 | mdrobnak | Oh ok |
| 02:32.22 | mdrobnak | I'll take a look in a sec |
| 02:33.20 | mdrobnak | dex_batt ? |
| 02:33.26 | tmzt | previous was 283 |
| 02:33.29 | tmzt | yes |
| 02:33.41 | tmzt | that's not to you, the previous thing |
| 02:34.09 | tmzt | odd |
| 02:34.22 | tmzt | that's not a definaiition |
| 02:35.14 | tmzt | and 5200 builds fine |
| 02:36.12 | mdrobnak | Hmm. Yeah I think in a few days I'll update. Mine is at "debug: print PCB XC and AMSS version" commit 5a78b0b372762244c127d9cd256d40ecc88254f1 |
| 02:36.17 | tmzt | I think it's the pointer |
| 02:37.01 | mdrobnak | Anyway, now I'm off to sleep. |
| 02:37.10 | mdrobnak | ttyl |
| 02:37.16 | tmzt | that's before the dzo stuff |
| 02:37.18 | tmzt | some of it |
| 02:38.06 | tmzt | maybe i get it |
| 02:38.10 | tmzt | it's the missing defines |
| 02:42.03 | *** join/#htc-linux madCoder` (n=madcoder@c-68-42-30-56.hsd1.pa.comcast.net) |
| 02:48.54 | *** join/#htc-linux root2 (n=root@rgnb-5d87d494.pool.mediaWays.net) |
| 03:05.29 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 03:18.13 | tmzt | found it |
| 03:18.40 | tmzt | maybe |
| 03:27.30 | *** join/#htc-linux BHSPitMonkey (n=stephen@unaffiliated/bhspitmonkey) |
| 03:40.37 | *** join/#htc-linux Amaranth_ (n=travis@ubuntu/member/Amaranth) |
| 04:00.44 | *** join/#htc-linux dzo (n=dzo@mail.marginz.co.nz) |
| 04:41.25 | *** join/#htc-linux droid0011 (n=g1@p4FDCEA10.dip.t-dialin.net) |
| 05:47.18 | *** join/#htc-linux rafyvitto (n=irc@166.194.115.165) |
| 06:07.55 | *** join/#htc-linux xixx (n=xixx@cpmsq.epam.com) |
| 06:14.07 | *** join/#htc-linux kiozen (n=oeichler@p5492145F.dip0.t-ipconnect.de) |
| 06:15.16 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 06:35.18 | *** join/#htc-linux cr2 (n=cr2@ip-77-25-132-186.web.vodafone.de) |
| 06:35.24 | cr2 | morning |
| 06:36.07 | cr2 | tmzt: raph100 has 128MB in the first ebi bank, and 128MB in the second bank |
| 06:36.36 | cr2 | some ram at the top of the first bank is used by amss/arm9 (MPU) |
| 06:36.44 | cr2 | we are using the rest. |
| 06:37.05 | cr2 | if android can't deal with that, fix android. |
| 06:37.39 | cr2 | i have 214MB ram with the ramdisk, and it works as expected. |
| 06:47.21 | NetRipper | that almost sounded like frustration |
| 06:47.22 | NetRipper | :p |
| 06:50.20 | *** join/#htc-linux FR^2 (n=frzwo@2001:41d0:1:ed2f:0:0:0:cafe) |
| 07:12.56 | *** join/#htc-linux cvmw (n=jlika@static-173-68-151-26.nycmny.fios.verizon.net) |
| 07:14.39 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 07:16.29 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 07:35.22 | *** join/#htc-linux zycho (n=zycho@dslb-088-070-058-220.pools.arcor-ip.net) |
| 07:36.27 | zycho | hi |
| 07:36.52 | zycho | how to enable sd card on my diam100 with android? |
| 08:20.58 | *** join/#htc-linux Amaranth (n=travis@ubuntu/member/Amaranth) |
| 08:39.20 | *** join/#htc-linux ALoGeNo (n=alogeno@unaffiliated/alogeno) |
| 08:40.02 | ALoGeNo | loo |
| 08:41.11 | FR^2 | lo |
| 08:56.27 | *** join/#htc-linux ALoGeNoff (n=alogeno@243.Red-217-125-20.staticIP.rima-tde.net) |
| 09:16.29 | *** join/#htc-linux Gnutoo (n=gnutoo@host98-153-dynamic.51-79-r.retail.telecomitalia.it) |
| 09:21.23 | *** join/#htc-linux SOG (n=SOG@n058152240099.netvigator.com) |
| 09:51.40 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 10:14.03 | *** join/#htc-linux Captnoord (n=Captnoor@145.74.183.223) |
| 10:57.35 | *** join/#htc-linux supererki (n=erki@88.196.5.78) |
| 11:25.09 | *** join/#htc-linux marex (n=marex@thor.hackndev.com) |
| 11:39.17 | *** join/#htc-linux balans (n=Administ@ip51cf1ccf.direct-adsl.nl) |
| 11:49.25 | *** join/#htc-linux [1]Captnoord (n=Captnoor@145.74.182.152) |
| 11:54.20 | *** join/#htc-linux dcordes (n=luke@unaffiliated/dcordes) |
| 11:56.18 | *** join/#htc-linux Zinbolic (n=zinbolic@84.238.80.215) |
| 12:30.55 | *** join/#htc-linux balans (n=Administ@53543B80.cable.casema.nl) |
| 12:38.39 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
| 12:40.57 | *** join/#htc-linux balans (n=Administ@53543B80.cable.casema.nl) |
| 12:46.26 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
| 13:09.54 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 13:29.58 | *** join/#htc-linux thedicemaster2 (n=thedicem@24.132.89.51) |
| 14:13.06 | *** join/#htc-linux phnom (i=simomn@130.240.99.163) |
| 14:39.26 | *** join/#htc-linux TaC_ (n=ircap8@106.Red-80-24-78.staticIP.rima-tde.net) |
| 14:45.03 | *** join/#htc-linux corto (n=corto@205.205.172.163) |
| 14:46.04 | corto | hi there! I've installed an arm toolchain and setup kernel 2.6.29.4 but having some config probs |
| 14:47.23 | corto | it seems there is no support for S3C2442 machines, i can see support for iPAQ H1940 for example, but no HTC, and clearly not my HTC HERM100 |
| 14:47.35 | corto | are there patches i should be aware of? |
| 14:51.08 | corto | i'm crosscompiling on gentoo x86 and this kernel is distclean from kernel.org |
| 14:54.06 | corto | or is there another place i could get some good fresh kernel sources? I wish to compile it myself |
| 14:55.54 | AstainHellbring | corto you need to use our git to grab the kernel |
| 14:56.01 | AstainHellbring | you can compile all you want from there |
| 14:56.05 | corto | AstainHellbring, ah! |
| 14:57.20 | corto | AstainHellbring, ok i was there already, took the long road tho... git on linuxtogo? |
| 14:57.43 | AstainHellbring | yes I believe so |
| 14:59.43 | corto | AstainHellbring, yea ok... thanks man! and i believe i'll still need my toolchain to build? |
| 14:59.51 | corto | (silly question, nm) |
| 15:09.58 | Marajin | yo AstainHellbring |
| 15:11.44 | AstainHellbring | yo Marajin |
| 15:22.30 | Marajin | how's it going down in groove town AstainHellbring ? |
| 15:24.27 | AstainHellbring | going great Marajin |
| 15:24.31 | AstainHellbring | got a spcs tp2 |
| 15:41.24 | *** part/#htc-linux droid0011 (n=g1@p4FDCEA10.dip.t-dialin.net) |
| 15:46.35 | *** join/#htc-linux marex (n=marex@thor.hackndev.com) |
| 15:48.07 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 15:54.15 | *** join/#htc-linux Captnoord (n=Captnoor@81.71.164.123) |
| 15:54.24 | *** join/#htc-linux rafyvitto (n=rafyvitt@24.54.253.34) |
| 15:58.42 | *** join/#htc-linux SOG (n=SOG@n219073059170.netvigator.com) |
| 15:58.54 | *** join/#htc-linux Gnutoo (n=gnutoo@host98-153-dynamic.51-79-r.retail.telecomitalia.it) |
| 16:15.35 | tmzt | AstainHellbring: 7600? |
| 16:16.35 | AstainHellbring | tmzt yep |
| 16:17.12 | tmzt | cr2: but I have raph500 |
| 16:17.18 | AstainHellbring | I have one of those too |
| 16:17.24 | tmzt | 500? |
| 16:17.31 | AstainHellbring | yep |
| 16:18.00 | AstainHellbring | 100,800,500 and the rhod400 (i think thats the num for it) |
| 16:18.59 | tmzt | well, 7600 amss seems to be most similar to 7500 |
| 16:19.28 | AstainHellbring | should be since cmda is the primary side of it |
| 16:20.00 | tmzt | I have some patches I'm working on but the phone either hangs or shuts off |
| 16:20.42 | AstainHellbring | cool |
| 16:20.51 | tmzt | I've split MTYPE for the cdmas |
| 16:21.17 | tmzt | but we need to add diam800 |
| 16:21.55 | tmzt | and rhod400 I guess it is |
| 16:22.23 | tmzt | I thinl it will be like tp more than tp2 |
| 16:22.59 | tmzt | does raph800 kernel boot on it? |
| 16:24.57 | Marajin | AstainHellbring: nice |
| 16:25.22 | Marajin | AstainHellbring: so does the MSM 76xx suck? :p |
| 16:27.37 | AstainHellbring | Marajin nope its nice |
| 16:27.42 | AstainHellbring | tmzt not tried it yet |
| 16:34.23 | Marajin | AstainHellbring: o rly? :p no annoying lags? |
| 16:34.42 | AstainHellbring | none that I seen yet |
| 16:34.44 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 16:34.51 | AstainHellbring | its tons faster than tp2 |
| 16:35.20 | tmzt | its 27 based? |
| 16:35.26 | AstainHellbring | 27? |
| 16:35.42 | tmzt | like the Pixi |
| 16:35.55 | tmzt | new gpu |
| 16:36.01 | AstainHellbring | dont think so |
| 16:36.06 | tmzt | or just more ram |
| 16:36.28 | AstainHellbring | same amount of ram too |
| 16:37.13 | tmzt | maybe somebody should yet it on raph800 |
| 16:37.19 | tmzt | try |
| 16:37.45 | Marajin | AstainHellbring: wait, didn't you just say the TP2 is faster than the TP2? :p I be confused |
| 16:37.45 | AstainHellbring | yah I'll try raph800 zimage on it |
| 16:37.52 | AstainHellbring | yes its faster |
| 16:38.06 | AstainHellbring | dont ask me how maybe newer gen ram or something but its faster |
| 16:38.17 | Marajin | no, read what I just said :p |
| 16:38.35 | AstainHellbring | yah I did |
| 16:38.39 | AstainHellbring | oh shit |
| 16:38.42 | AstainHellbring | TP2 is faster than tp |
| 16:38.52 | tmzt | oh |
| 16:39.01 | AstainHellbring | and light years faster than vzw's TP |
| 16:39.09 | tmzt | thought you meant gsm version |
| 16:39.19 | AstainHellbring | yah I dont have the gsm version yet |
| 16:40.33 | Marajin | I thought the TP2 was a 7200 anyway? |
| 16:40.46 | tmzt | yeah |
| 16:41.05 | tmzt | but not same as non-A I think |
| 16:41.16 | tmzt | kais |
| 16:41.22 | Marajin | eh the kovsky is a 7200A though |
| 16:41.27 | Marajin | and it performs like a dog |
| 16:41.56 | Marajin | the Tp2 and X1 should have same chipset afaik |
| 16:41.59 | AstainHellbring | chainfire's blog post also said tp2 was far better than tp they did come kinda cool shit to make it better |
| 16:42.25 | Marajin | AstainHellbring: like what? voodoo rituals? a deal with satan? :p |
| 16:42.51 | AstainHellbring | maybe |
| 16:43.07 | Marajin | guess we'll see if the X1 seems any less annoying with the vulcan drivers |
| 16:43.26 | *** join/#htc-linux ali1234 (n=al@87.106.101.225) |
| 16:44.11 | Marajin | AstainHellbring: wait so where does the 7600 come into it? |
| 16:44.22 | AstainHellbring | Marajin the cdma one is 7600 |
| 16:44.25 | AstainHellbring | ie world phone |
| 16:44.30 | AstainHellbring | has cdma and gsm functions |
| 16:44.34 | AstainHellbring | vulcan drivers? |
| 16:45.21 | Marajin | AstainHellbring: yeah someone got ahold of the Vulcan (Xperia X2) drivers and they apparently work on the X1 |
| 16:45.55 | *** join/#htc-linux PaxAnima (n=petter@cm-84.215.60.127.getinternet.no) |
| 16:46.18 | AstainHellbring | ahh ic Marajin must be sameish chipset on x2 |
| 16:46.26 | Marajin | aye |
| 16:46.39 | Marajin | they got an official 6.5 XIP for it too |
| 16:46.45 | AstainHellbring | for x2 or x1? |
| 16:46.51 | Marajin | x1 |
| 16:47.35 | AstainHellbring | cool |
| 16:48.09 | Marajin | well I got to head, school PTA meeting tonight |
| 16:48.09 | Marajin | whoo |
| 16:48.15 | Marajin | pity me :( |
| 16:50.09 | AstainHellbring | eww |
| 17:04.15 | rafyvitto | hey anyone here with a raph100 or raph110? |
| 17:04.27 | Captnoord | yup |
| 17:05.03 | AstainHellbring | rafyvitto I have one |
| 17:05.03 | rafyvitto | is your capacitive touch panel's film pilling out ? |
| 17:05.07 | rafyvitto | mine is :( |
| 17:05.22 | AstainHellbring | film pulling out? |
| 17:05.24 | rafyvitto | its started to pill out, by it self |
| 17:05.29 | Captnoord | its not a capacitive screen |
| 17:05.31 | Captnoord | and nope |
| 17:05.45 | Captnoord | last time I checked its a resistive |
| 17:05.56 | rafyvitto | im refering to the touch panel |
| 17:06.02 | Captnoord | I know |
| 17:06.03 | rafyvitto | not the lcd screen xD |
| 17:06.06 | Captnoord | I know |
| 17:06.16 | Captnoord | the touch panel |
| 17:06.19 | rafyvitto | yes |
| 17:06.20 | Captnoord | hmmmm |
| 17:06.28 | Captnoord | you mean the buttons at the bottom? |
| 17:06.42 | rafyvitto | yes |
| 17:06.52 | Captnoord | lol.... |
| 17:07.09 | Captnoord | your phone, does it get wet a lot? |
| 17:07.25 | rafyvitto | at one time,when i was installing a shield |
| 17:07.27 | Captnoord | do you use the protective sleeve |
| 17:07.35 | Captnoord | hehe |
| 17:07.40 | rafyvitto | ohh crap |
| 17:07.42 | Captnoord | what for a shield? |
| 17:07.49 | Captnoord | I mean |
| 17:07.57 | rafyvitto | and im not even using it...fss |
| 17:08.08 | Captnoord | shields are fun.... but they also make water not go away |
| 17:08.43 | Captnoord | and usualy these things can't take that a lot |
| 17:08.56 | rafyvitto | i took it off, it fuck't my touchscreen's sensitivity |
| 17:09.20 | Captnoord | yup it does... |
| 17:09.30 | Captnoord | how old is the device? |
| 17:09.45 | rafyvitto | idk im the second owner |
| 17:09.49 | rafyvitto | bought it off ebay |
| 17:09.51 | kri5 | hi there |
| 17:10.02 | kri5 | any news about blackstone porT? |
| 17:10.08 | Captnoord | how long to you have it....... |
| 17:10.12 | rafyvitto | i guess around 1 year and 2 months |
| 17:10.21 | rafyvitto | me like 5 months |
| 17:10.36 | Captnoord | hmmm me about the same |
| 17:10.45 | Captnoord | its still in perfect condition |
| 17:10.50 | rafyvitto | lucky you |
| 17:10.53 | rafyvitto | >< |
| 17:11.00 | Captnoord | only the back is wairing out a bit.... |
| 17:11.03 | Captnoord | the corners |
| 17:11.07 | rafyvitto | same here |
| 17:11.51 | *** join/#htc-linux MrPippy (n=pip@adsl-75-33-11-169.dsl.sndg02.sbcglobal.net) |
| 17:12.01 | Captnoord | I wonder how much warrenty ya got from the factory |
| 17:12.10 | Captnoord | 3 months |
| 17:12.11 | Captnoord | 'wasn't it |
| 17:12.44 | rafyvitto | captnoord: why are you saying the touch pad isnt capasitive, i've read in a thousand articles/post that it is indeed >< |
| 17:12.54 | Captnoord | dude |
| 17:13.03 | Captnoord | I was thinking you talked about the lcd one |
| 17:13.08 | rafyvitto | ohhhh ok |
| 17:13.31 | *** join/#htc-linux pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 17:15.05 | *** join/#htc-linux rob_w (n=bob@p549BDEBB.dip.t-dialin.net) |
| 17:18.31 | rafyvitto | cya everyone |
| 17:29.56 | *** join/#htc-linux NAiL (n=repvik@nslu2-linux/repvik) |
| 17:40.59 | *** join/#htc-linux cr2 (n=cr2@109.84.58.205) |
| 17:42.40 | cr2 | hi |
| 17:43.01 | cr2 | AstainHellbring: dump the spl ? |
| 17:43.31 | cr2 | tmzt: the 6150 compilation error is easy to fix |
| 17:45.06 | AstainHellbring | cr2 why dump it? |
| 17:45.12 | AstainHellbring | we have shipped and test roms with spls |
| 17:45.13 | *** join/#htc-linux stefan_schmidt (n=stefan@82.113.106.4) |
| 17:45.18 | high-rez | cr2: Does dex_batt only work on cdma devices ? |
| 17:48.15 | cr2 | high-rez: it's commented out now. |
| 17:48.32 | cr2 | AstainHellbring: where ? |
| 17:48.44 | cr2 | AstainHellbring: dumping spl is easy to do anyway. |
| 17:49.21 | high-rez | cr2: Yeah, was just curious if the function is only specific to certain devices or if its broken. |
| 17:49.58 | AstainHellbring | cr2 I can do both if you like gimme a sec and I can place some dumped spls all over |
| 17:50.23 | *** join/#htc-linux dcordes (n=luke@unaffiliated/dcordes) |
| 17:50.32 | cr2 | AstainHellbring: lol |
| 17:50.37 | high-rez | What device are you duming spl for? I thought cmonex already had pretty muchn every spl out there ;) |
| 17:51.00 | cr2 | high-rez: it's implemented in wince, and has ioctls, but is not used |
| 17:51.01 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 17:51.12 | dcordes | evening dudes and dudettes |
| 17:51.26 | cr2 | high-rez: the return values look strange though. may be a bug in the dex implementation |
| 17:51.32 | cr2 | hi dcordes |
| 17:51.38 | cr2 | dcordes: patch time :) |
| 17:52.00 | high-rez | cr2: I see. Amazing how much you guys are able to RE. I'm impressed just watching. |
| 17:52.07 | dcordes | cr2, yeaaaayy |
| 17:52.39 | dcordes | high-rez, spl got to be freshly squeezed |
| 17:53.24 | AstainHellbring | cr2 anywhere you'd like me to place these? |
| 17:54.07 | cr2 | AstainHellbring: dcc or pm |
| 17:58.01 | AstainHellbring | cr2 lemme know if you can get this dcc |
| 17:58.33 | cr2 | failed. try again |
| 17:59.28 | AstainHellbring | bah dcc usually fails for me |
| 17:59.42 | cr2 | maybe firewall and such |
| 17:59.55 | AstainHellbring | yah proally is my sonic wall |
| 18:04.02 | dcordes | rapidshare ?? |
| 18:04.52 | cr2 | dcordes: is overloaded |
| 18:05.27 | dcordes | cr2, should we get public ftp on htc-linux.org ? |
| 18:05.56 | *** join/#htc-linux stickboy (n=anonymou@128.153.183.126) |
| 18:07.19 | cr2 | dcordes: not for the dumps |
| 18:07.29 | dcordes | oh.. right |
| 18:07.31 | AstainHellbring | http://www.privatepaste.com/download/ec08KD8jee |
| 18:07.42 | dcordes | that would be a bad thing |
| 18:15.02 | AstainHellbring | http://www.privatepaste.com/download/6a0oRiVwmc |
| 18:16.06 | AstainHellbring | http://www.privatepaste.com/download/4e0fjkBj2c |
| 18:17.42 | cr2 | AstainHellbring: the same md5sum ? |
| 18:18.25 | cr2 | Setting country code using abbreviation: JP |
| 18:18.27 | cr2 | Setting country code using abbreviation: TW |
| 18:18.29 | cr2 | Setting country code using abbreviation: US |
| 18:18.30 | cr2 | Setting country code using abbreviation: ALL |
| 18:18.31 | cr2 | Not suppot GetCountry! |
| 18:18.48 | cr2 | LOL |
| 18:18.51 | cr2 | Only support tx and txwithack!! |
| 18:19.19 | AstainHellbring | uhm huh cr2? |
| 18:19.29 | cr2 | XD board ? |
| 18:19.48 | AstainHellbring | what is tx and txwithack? |
| 18:20.03 | cr2 | probably fro mthe wifi |
| 18:20.07 | dcordes | sounds like fmaous candy bar |
| 18:20.33 | AstainHellbring | and xd board? |
| 18:22.32 | AstainHellbring | cr2 how are you reading it too? |
| 18:22.54 | cr2 | with 'strings' |
| 18:23.12 | AstainHellbring | strings is a linux tool isnt it? |
| 18:23.33 | cr2 | yes |
| 18:23.37 | cr2 | binutils |
| 18:23.45 | AstainHellbring | is there something for windows to do it? |
| 18:23.54 | cr2 | cygwin |
| 18:23.57 | cr2 | ARM 9 power failed |
| 18:24.25 | cr2 | hehe |
| 18:24.28 | cr2 | <PROTECTED> |
| 18:24.30 | cr2 | <PROTECTED> |
| 18:24.31 | cr2 | <PROTECTED> |
| 18:24.50 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 18:24.53 | cr2 | looks like epson mddi chipset |
| 18:26.01 | cr2 | nothing groundbreaking. just needs a wiki page, and filled vreg/gpio pages |
| 18:26.34 | cr2 | AstainHellbring: how does haret identify it ? |
| 18:26.55 | AstainHellbring | not sure not loaded haret on it yet |
| 18:27.12 | cr2 | look in haretlog.txt |
| 18:30.17 | cr2 | AstainHellbring: i would also like to see the smem dump (contains your imei :), and the adsprtossvccore.dll |
| 18:31.36 | cr2 | topaz and rhod* may fail the boot because the fbram is at a different address |
| 18:33.57 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 18:34.03 | Untouchab1e | I have a linux terminal question |
| 18:34.11 | AstainHellbring | cr2 ok I'll be ready to do smem dump in a few |
| 18:35.17 | *** join/#htc-linux droid001 (n=g1@p4FDCEA10.dip.t-dialin.net) |
| 18:35.39 | cr2 | txpower seems to depend on the country setting |
| 18:36.17 | dcordes | Untouchab1e, shoot |
| 18:37.06 | cr2 | uh. bcm2345 wifi. linux driver ? |
| 18:37.20 | Untouchab1e | dcordes, I have a question here that says there is an alternative to the "find" command and wants me to list the advantages and disadvantages of it.. |
| 18:37.24 | cr2 | bcm4325 |
| 18:37.29 | Untouchab1e | but I cant figure out what that other command is.. |
| 18:37.39 | Untouchab1e | locate isnt the same, as it searches databases, doesnt it? |
| 18:38.14 | dcordes | Untouchab1e, according to 'man locate' it does. |
| 18:38.35 | Untouchab1e | hmm.. |
| 18:38.51 | cr2 | bcm4325 also has a BT and fm Rx |
| 18:38.55 | Untouchab1e | Thats what I suspected.. but I get that "locate.databas" does not exist |
| 18:42.04 | dcordes | Untouchab1e, maybe you don't have /var/lib/mlocate/mlocate.db :D |
| 18:42.42 | toer | run updatedb |
| 18:44.15 | Untouchab1e | ok.. it has to be locate |
| 18:46.46 | AstainHellbring | one thing I noticed is there is an easy diag mode you can get to |
| 18:47.54 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 18:51.08 | ali1234 | Untouchab1e: locate uses a pregenerated database to speed up searching, you have to run a cron job to update it |
| 18:52.44 | *** join/#htc-linux imfloflo (n=moi@173.25.71-86.rev.gaoland.net) |
| 18:55.04 | cr2 | AstainHellbring: uartDM2 for BT... |
| 18:58.06 | cr2 | 4 gpios for turn on. |
| 18:58.40 | cr2 | 5b, 1f, 5e, 23 |
| 18:59.12 | luc_ | hi all |
| 18:59.18 | luc_ | can i ask something? |
| 18:59.34 | luc_ | how can i build android with wireless? |
| 18:59.47 | luc_ | and bluetooth support |
| 18:59.54 | cr2 | dma8 too |
| 19:00.13 | luc_ | i builded andoid from master and i se no wireless binaries |
| 19:00.34 | luc_ | and i see that sources are there |
| 19:00.48 | *** join/#htc-linux Gnutoo (n=gnutoo@host98-153-dynamic.51-79-r.retail.telecomitalia.it) |
| 19:01.25 | cr2 | 53, 27,28,12 are kbd |
| 19:01.36 | cr2 | in |
| 19:01.58 | cr2 | Gnutoo: you have g1 ? |
| 19:02.01 | luc_ | can i mount cramfs with write support? |
| 19:02.33 | *** join/#htc-linux stickboy (n=anonymou@128.153.22.15) |
| 19:02.37 | *** join/#htc-linux Gnutoo (n=gnutoo@host98-153-dynamic.51-79-r.retail.telecomitalia.it) |
| 19:02.57 | dcordes | luc_, which device? |
| 19:03.16 | luc_ | for diamond |
| 19:03.26 | luc_ | but no maters for what device |
| 19:03.37 | luc_ | i builded my own android |
| 19:03.39 | dcordes | we have no android master branch |
| 19:04.01 | luc_ | ojk donut |
| 19:04.26 | cr2 | 0x19 is for reset |
| 19:04.26 | dcordes | apt, htc kernel |
| 19:04.27 | apt | rumour has it, htc kernel is http://www.htc-linux.org/wiki/index.php?title=Kernel |
| 19:04.57 | dcordes | luc_, we don't have donut branch either |
| 19:05.01 | luc_ | what apt |
| 19:05.20 | luc_ | but what branch do you have |
| 19:05.27 | *** join/#htc-linux stickboy (n=anonymou@128.153.22.15) |
| 19:05.35 | luc_ | i builded android from their repo |
| 19:05.37 | dcordes | luc_, see the wiki page apt referred to |
| 19:05.40 | cr2 | pmdh =0xa41 |
| 19:05.45 | cr2 | reminds raph800 |
| 19:05.51 | luc_ | no i have gento |
| 19:05.58 | luc_ | no apt for mwe |
| 19:06.18 | *** join/#htc-linux leaigor (n=laigor@188.134.36.14) |
| 19:06.20 | dcordes | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm-2.6.27 here is the diamond kernel code |
| 19:06.38 | cr2 | UP_RSTz=0x59 |
| 19:06.48 | dcordes | luc_, there is no googel branch with diamond code |
| 19:06.56 | luc_ | i know |
| 19:07.10 | luc_ | but i don't speak about kernel |
| 19:07.33 | luc_ | i use kernel builded by dzo |
| 19:07.36 | cr2 | TP MFG data ? the TP calibration is in nand ? |
| 19:07.47 | luc_ | but i want to test latest android |
| 19:07.59 | cr2 | RHOD100 |
| 19:08.07 | luc_ | from git master android branch from google sources |
| 19:08.23 | dcordes | luc_, then build it ? |
| 19:08.29 | luc_ | uff |
| 19:08.37 | luc_ | i built it |
| 19:09.00 | luc_ | but afther i build it i have no wireless binarie |
| 19:09.09 | luc_ | llike wpa_supplicant |
| 19:09.12 | luc_ | in /bin |
| 19:09.40 | luc_ | and i so that sources are there but are not builded |
| 19:10.07 | dcordes | luc_, http://www.htc-linux.org/wiki/index.php?title=WL1251 the ti1251 driver has an own wireless extension kind of thing. |
| 19:10.29 | luc_ | ok |
| 19:10.32 | dcordes | luc_, ok this problem is very android specific. you must ask #android |
| 19:10.41 | cr2 | dcordes: compiling the kernel |
| 19:10.46 | luc_ | so now how can i mount cramfs with rw support? |
| 19:12.25 | ali1234 | you can't. cramfs is designed to maximise compression at the expense of write capability |
| 19:12.30 | *** join/#htc-linux kiozen (n=kiozen@rgnb-5d87dbe5.pool.mediaWays.net) |
| 19:12.32 | dcordes | apt, what's cramfs? |
| 19:12.32 | apt | rumour has it, cramfs is a read-only fs wiwth each page in each file individually compressed or workable over block devices. |
| 19:12.44 | Gnutoo | luc_, cramfs does not have rw last time I checked |
| 19:12.46 | dcordes | luc_, what ali1234 and apt said. it is read-only by design |
| 19:12.54 | cr2 | 0x17=aud_hp_en |
| 19:13.18 | luc_ | aha |
| 19:13.24 | cr2 | Gnutoo: can you dump the smem before and after gps start on g1 ? |
| 19:13.39 | luc_ | so i cant modify images from conect-utb for diamon |
| 19:13.48 | luc_ | i have to make new ones? |
| 19:13.51 | Gnutoo | cr2,ouch gps is not working on mine |
| 19:14.04 | Gnutoo | should I restore the original firmware? |
| 19:14.17 | dcordes | luc_, who said they were cramfs? in case you have those read-only images, mount them, extract them, modify the content, repack. |
| 19:14.17 | luc_ | so i cant modify images from conect-utb for diamond? |
| 19:14.41 | luc_ | yhey are not? |
| 19:14.45 | luc_ | cramfs? |
| 19:15.13 | dcordes | I don't know connect utb images. roll your own then you should know what you get |
| 19:15.20 | luc_ | because when i first tray to mount i didnt have support for kramfs in kernel |
| 19:15.32 | dcordes | luc_, maybe androed doesn't give you wifi because wifi is in the seperate branch. |
| 19:16.05 | luc_ | who is building android from connect-utb? |
| 19:16.29 | luc_ | Untouchab1e> |
| 19:16.40 | luc_ | ? |
| 19:17.04 | dcordes | luc_, so you want them because wifi support for diamond is advertised? |
| 19:17.17 | cr2 | dcordes: just a minor code cleanup -> https://privatepaste.com/c91xjDYMVO |
| 19:17.31 | luc_ | `not realy |
| 19:17.41 | luc_ | i want to know howto |
| 19:17.52 | luc_ | :) |
| 19:18.01 | luc_ | to do stuf with android |
| 19:18.54 | dcordes | if android would be gpl I would be so much more eager to help |
| 19:19.20 | dcordes | forum.xda-developers.com has information on the ti1251 wifi situation with the 'non official' devices |
| 19:19.42 | dcordes | basically it's the normal module with the tools hacked to use correct gpios |
| 19:19.58 | luc_ | i know the situation |
| 19:20.07 | dcordes | so the device gets powered etc. then you need the correct firmware and calibration balbla |
| 19:20.19 | cr2 | dcordes: this driver is gpl. just a total mess |
| 19:20.30 | luc_ | so what is the status for wireless for diamond? |
| 19:21.41 | luc_ | i see that you are working on it? |
| 19:21.41 | dcordes | cr2, I didn't say driver but android |
| 19:21.47 | dcordes | no I'm not |
| 19:21.47 | cr2 | ok |
| 19:21.57 | luc_ | not you |
| 19:21.59 | luc_ | cr2 |
| 19:22.14 | cr2 | kiozen: the triton firmware looks like a barebones s3c2442 wince code |
| 19:22.29 | *** join/#htc-linux rafyvitto (n=rafyvitt@24.54.253.34) |
| 19:23.31 | *** mode/#htc-linux [+o dcordes] by ChanServ |
| 19:23.34 | dcordes | ha! |
| 19:23.42 | luc_ | afther the kernel is ready with all drivers, can we use core boot to boot into android? |
| 19:23.56 | luc_ | or is another way? |
| 19:23.59 | dcordes | luc_, what's core boot ? |
| 19:24.25 | luc_ | it is linuxbios |
| 19:24.43 | phh | coreboot on an ARM ? |
| 19:24.44 | phh | weird |
| 19:24.59 | dcordes | luc_, maybe uboot |
| 19:25.16 | dcordes | cr2, push'd |
| 19:25.20 | luc_ | aha |
| 19:25.34 | dcordes | luc_, but that doesn't depend on wifi working. |
| 19:26.18 | dcordes | bbl |
| 19:26.53 | luc_ | i know |
| 19:27.13 | luc_ | so i can do that now? |
| 19:27.19 | cr2 | dcordes: thanks |
| 19:27.30 | cr2 | dcordes: ls /etc/dropbear/dropbear_rsa_host_key after boot |
| 19:27.43 | cr2 | dcordes: can you add it to initramfs image ? |
| 19:27.59 | dcordes | luc_, maybe tmzt has some exercises for you :) he worked on uboot. but you have to be brave |
| 19:28.58 | dcordes | luc_, the brickability is high because you have to overwrite the old wince stuff in nand |
| 19:29.26 | luc_ | is jtag working for diamond? |
| 19:29.31 | cr2 | dcordes: if the spl stays intact, it's not a problem |
| 19:29.56 | dcordes | luc_, I don't know but I suspect you would have to solder |
| 19:30.07 | *** join/#htc-linux ali12341 (n=al@87.106.101.225) |
| 19:30.20 | luc_ | if it works, is ok i'am redy tyo test |
| 19:30.28 | luc_ | if it works, is ok i'am ready to test |
| 19:30.44 | AstainHellbring | cr2 |
| 19:30.48 | cr2 | dcordes: syslogd is working |
| 19:30.50 | dcordes | luc_, you have to do the inital tests |
| 19:31.00 | AstainHellbring | haret shows in box generic arm v6 |
| 19:31.34 | cr2 | AstainHellbring: should be RHOD100 in the haretlog.txt |
| 19:31.57 | cr2 | Sep 16 21:25:56 htcraphael user.info kernel: [130849.884338] PCB XC: 00000001 |
| 19:31.59 | cr2 | Sep 16 21:25:56 htcraphael user.info kernel: [130849.884368] AMSS version: 52.33.25.17W |
| 19:32.37 | AstainHellbring | do I need to try to launch a kernel with it to get the haretlog? |
| 19:32.42 | luc_ | so tmzt are you? |
| 19:32.48 | luc_ | :) |
| 19:32.49 | kiozen | cr2: triton or aventura? |
| 19:33.18 | luc_ | dcordes how do you modify initramfs? |
| 19:33.29 | dcordes | tmzt, luc_ wants to risk his live in order to try the uboot on diamond |
| 19:33.30 | *** join/#htc-linux pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 19:33.54 | luc_ | my life no my diamond life, heh he |
| 19:33.58 | luc_ | :) |
| 19:34.16 | dcordes | luc_, wait I make wiki page |
| 19:34.24 | luc_ | super |
| 19:34.32 | luc_ | when? |
| 19:35.07 | luc_ | and what type are the images from connect-utb? |
| 19:35.16 | cr2 | kiozen: triton. didn't find the fw file for aventura |
| 19:35.26 | kiozen | ok |
| 19:35.33 | kiozen | which triton |
| 19:35.41 | cr2 | kiozen: aventura looks a bit overpriced. |
| 19:35.43 | kiozen | 1500/2000 |
| 19:35.50 | kiozen | or 300,400,500 |
| 19:35.52 | cr2 | kiozen: the most advanced |
| 19:35.57 | kiozen | ok |
| 19:35.59 | cr2 | with the cam |
| 19:36.19 | kiozen | that one is as expensive as the aventura |
| 19:36.51 | cr2 | without the cam ? |
| 19:38.17 | cr2 | Sep 16 21:25:56 htcraphael user.warn kernel: [130853.243255] Searching for adsp_cid |
| 19:38.19 | cr2 | Sep 16 21:25:56 htcraphael user.warn kernel: [130853.243316] adsp cid found: 0feb8f4a |
| 19:38.32 | cr2 | that's too early. |
| 19:38.47 | cr2 | linux rpc is not yet initialized |
| 19:40.53 | cr2 | Sep 16 21:25:56 htcraphael user.warn kernel: [130853.391571] [RR] x NEW_SERVER id=1:0feb8f4a prog=3000000b:0 |
| 19:40.55 | cr2 | Sep 16 21:25:56 htcraphael user.warn kernel: [130853.391601] [RR] send control message cmd=4 srv.cmd=4 prog=3000000b:0 id=1:0feb8f4a |
| 19:41.23 | cr2 | ADSPRTOSMTOA 0x3000000b |
| 19:42.21 | cr2 | ok, the wince cid is reused here |
| 19:42.47 | cr2 | but doesn't it work with "linux" cid ? |
| 19:42.49 | dcordes | luc_, http://www.htc-linux.org/wiki/index.php?title=Initrd |
| 19:43.20 | cr2 | mddi init is strange |
| 19:45.00 | cr2 | Parsing /etc/bluetooth/main.conf failed: No such file or directory |
| 19:45.09 | cr2 | Parsing /etc/bluetooth/input.conf failed: No such file or directory |
| 19:45.23 | cr2 | Parsing /etc/bluetooth/audio.conf |
| 19:46.58 | *** part/#htc-linux imfloflo (n=moi@173.25.71-86.rev.gaoland.net) |
| 19:47.41 | dcordes | cr2, initrd has no default confs? |
| 19:47.54 | dcordes | maybe it's too device specific so OE doesn't write |
| 19:48.41 | dcordes | cr2, here's keygen-hassle-free initrd ^^ http://linuxtogo.org/~lgorris/initrd-angstrom-2009-09-17 I traveled forward in time to make it (date) |
| 19:49.45 | cr2 | lol |
| 19:49.47 | cr2 | ok |
| 19:55.28 | high-rez | What was the conclusion on enabling all of the device memory from yesterday? |
| 19:55.49 | cr2 | high-rez: where ? |
| 19:57.10 | high-rez | cr2: I could swear I saw you and someone else working on it. :) But that there was an android bug possibly causing problems when both banks were enabled? I'm going from a rough sleep deprived memory here. |
| 19:57.33 | *** join/#htc-linux druidu1 (n=druidu@78.97.155.94) |
| 19:58.16 | druidu1 | hello everyone |
| 19:58.41 | cr2 | high-rez: diam100 and raph100 and raph800 use all possible memory |
| 19:58.58 | cr2 | hi druidu1 |
| 19:58.58 | *** join/#htc-linux stickboy (n=anonymou@128.153.180.178) |
| 19:59.09 | high-rez | cr2: Ahh ok. raph110 is a different case from the raph100 ? |
| 19:59.50 | cr2 | if you use the raph100 mtype, it's the same device |
| 20:00.26 | high-rez | The only difference is the code running on the arm11 and possibly the antenna, no? (and the awful keyboard layout) |
| 20:01.14 | AstainHellbring | high-rez just the keyboard no front camera and the hardware for radio |
| 20:01.19 | cr2 | don't know |
| 20:01.34 | AstainHellbring | code running on arm11 is same as on raph100 |
| 20:01.37 | cr2 | AstainHellbring: but it's gsm ? |
| 20:01.51 | AstainHellbring | raph110 and raph100 are both gsm |
| 20:01.55 | cr2 | <PROTECTED> |
| 20:01.57 | cr2 | <PROTECTED> |
| 20:01.58 | cr2 | ok |
| 20:02.08 | AstainHellbring | but the hardware for raph110 has the US 3G bands |
| 20:02.16 | cr2 | ok |
| 20:02.31 | cr2 | raph100 didn't work for me in the US |
| 20:02.46 | AstainHellbring | I have one it works but just on the 2G bands |
| 20:02.49 | cr2 | a780 was ok |
| 20:04.02 | high-rez | AstainHellbring: I kind of remember hearing that the radio was capable of both bands, but needed configuration options - but that nobody was able to get a 100 working int he us or a 110 working in .eu. Would be great if there's a way to tell the 11 to work in the euro bands :) |
| 20:04.22 | high-rez | (hell i could have even heard that from you!) |
| 20:05.53 | AstainHellbring | 110 already out of box works on euro bands |
| 20:06.26 | high-rez | For 3g? |
| 20:06.30 | AstainHellbring | and no no configuration of the 100 will work with the US 3G bands cmonex and I tried a ton of shit |
| 20:06.33 | AstainHellbring | yes high-rez for 3g |
| 20:06.37 | high-rez | No kiddin |
| 20:06.54 | high-rez | Even 2100, or just 900/1800? |
| 20:07.08 | AstainHellbring | 2100 is the euro 3g band |
| 20:07.25 | high-rez | I think some prociders over there do wcdma on 900 too |
| 20:07.34 | cr2 | 900/1800 is the gsm |
| 20:07.35 | *** join/#htc-linux Echo31 (n=olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 20:07.59 | AstainHellbring | yah it has the quad band gsm and single band wcdma |
| 20:08.21 | cr2 | druidu: the lcd panel code path is wrong somehow |
| 20:08.34 | druidu | what path? |
| 20:08.42 | cr2 | AstainHellbring: ok, that makes sense |
| 20:09.08 | cr2 | druidu: it calls epson and nt* but not toshiba for some reason ? |
| 20:09.18 | cr2 | i'll boot raph |
| 20:09.29 | druidu | wasn't that based on the hex client id? |
| 20:09.59 | cr2 | should be |
| 20:10.12 | cr2 | we may also use a more friendly name for it |
| 20:11.04 | cr2 | [ 5.566070] +mddi_client_nt35399_init() |
| 20:11.11 | *** join/#htc-linux chab7 (n=chab7@85.67.206.132) |
| 20:11.20 | cr2 | [ 5.616210] fake vsync |
| 20:11.25 | druidu | <PROTECTED> |
| 20:11.25 | druidu | <PROTECTED> |
| 20:12.22 | druidu | so product_id is relevant, name is just a name |
| 20:12.46 | cr2 | err. now toshiba pops up too |
| 20:13.04 | cr2 | why does it call init for all panel types then ? |
| 20:13.14 | druidu | tries to autodetect it? |
| 20:13.33 | cr2 | Sep 16 22:10:53 htcraphael user.warn kernel: [ 5.350402] htcraphael_mddi_power_client(1) |
| 20:13.33 | cr2 | Sep 16 22:10:53 htcraphael user.info kernel: [ 5.350708] mddi cmd send rtd: int 23a000, stat 809063, rtd val d |
| 20:13.35 | cr2 | Sep 16 22:10:53 htcraphael user.info kernel: [ 5.350860] mddi: registering panel mddi_c_d263_0000 |
| 20:13.37 | cr2 | Sep 16 22:10:53 htcraphael user.info kernel: [ 5.350921] mddi: publish: |
| 20:13.39 | cr2 | Sep 16 22:10:53 htcraphael user.info kernel: [ 5.351928] vsync on gpio 97 now 1 |
| 20:13.41 | cr2 | Sep 16 22:10:53 htcraphael user.warn kernel: [ 5.353179] toshiba GPIODATA=0x000000c0 at mddi_enable |
| 20:13.43 | cr2 | Sep 16 22:10:53 htcraphael user.info kernel: [ 5.354248] msmfb_probe() installing 480 x 640 panel |
| 20:13.53 | druidu | d263 |
| 20:14.10 | cr2 | it's toshiba |
| 20:14.18 | druidu | I don't see init for all panel types |
| 20:14.22 | cr2 | we know the full name too |
| 20:14.37 | cr2 | but they are all in ysslog |
| 20:14.46 | druidu | ysslog? |
| 20:14.59 | cr2 | [ 5.566070] +mddi_client_nt35399_init() |
| 20:15.01 | cr2 | syslog |
| 20:15.05 | druidu | lol |
| 20:15.51 | cr2 | gpio is 0xc0 |
| 20:18.21 | cr2 | id=0 |
| 20:18.23 | cr2 | if bit 0x10 is not set -> id+=1 |
| 20:18.24 | cr2 | if bit 0x04 is not set -> id+=2 |
| 20:18.35 | druidu | yeah, know this code |
| 20:18.41 | druidu | this was for panel id |
| 20:18.47 | cr2 | >>4 &3 from g1 does not look good |
| 20:19.23 | cr2 | 1100.0000 |
| 20:19.25 | druidu | we already established auroracode 2.6.29 branch calculates this a bit differently |
| 20:19.56 | cr2 | =0 -> panel id 5 (hitachi) |
| 20:19.57 | cr2 | =1 -> panel id 0xa (sharp) |
| 20:19.59 | cr2 | =2 -> panel id 0x11 (toppoly2) |
| 20:20.00 | cr2 | =3 -> panel id 2 (toppoly) |
| 20:20.09 | cr2 | i need to check this code again |
| 20:20.34 | cr2 | aybe 'is not set' should be 'is set' |
| 20:21.10 | cr2 | because both bits are not set, and wince says 'panel id 5 (hitachi)' |
| 20:21.55 | cr2 | check PCB XC |
| 20:21.56 | cr2 | if (XC) gpio_0x63=1 |
| 20:21.58 | cr2 | else gpio_0x52=1 |
| 20:22.05 | cr2 | this part is ok, though |
| 20:22.22 | cr2 | because i can trace 0x63 in wince. |
| 20:22.31 | cr2 | and not 0x52 |
| 20:22.39 | cr2 | XC=1 |
| 20:23.39 | cr2 | [21:31] <cr2> Sep 16 21:25:56 htcraphael user.info kernel: [130849.884338] PCB XC: 00000001 |
| 20:23.40 | cr2 | [21:31] <cr2> Sep 16 21:25:56 htcraphael user.info kernel: [130849.884368] AMSS version: 52.33.25.17W |
| 20:24.17 | druidu | I have XC=1 also |
| 20:24.48 | cr2 | good |
| 20:24.57 | cr2 | and hitachi ? |
| 20:25.06 | druidu | you know... I forgot again :) |
| 20:25.11 | druidu | no, actually sharp |
| 20:25.25 | cr2 | druidu: btw, the board-sapphire-h2w.c may be ported to raph/diam |
| 20:25.39 | cr2 | druidu: what is your GPIODATA value ? |
| 20:25.54 | druidu | don't have the unmasked value |
| 20:25.59 | cr2 | high-rez: can you boot the latest git kernl ? |
| 20:26.00 | druidu | the masked value was 0xc0 |
| 20:26.21 | cr2 | druidu: >>4 & 3 = 0xc0 ? |
| 20:27.48 | cr2 | AstainHellbring: it should be possible to reuse http://www.htc-linux.org/wiki/index.php?title=Topaz_GPIO for RHOD100 |
| 20:28.14 | druidu | hmm, it's bits 6,7 counting from 0 |
| 20:28.59 | cr2 | hey , some gsm raph/diam people around ? |
| 20:30.43 | high-rez | cr2: The one with your minor code cleanup ? |
| 20:30.55 | druidu | val = read_client_reg(GPIODATA) & 0x2C0; |
| 20:31.12 | druidu | so that's 0xC0 for me |
| 20:31.33 | cr2 | druidu: weird. g1 is different |
| 20:31.34 | high-rez | The latest I've tried was your commit 21 hours ago to disable the dex_batt thing (manually patched of course). I'll build the latest tree if you want though :) |
| 20:31.50 | druidu | https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=blob;f=drivers/video/msm/mddi_toshiba_vga.c;h=f7e8482c62dfa99229c5c53590357801b6f4205e;hb=android-msm-2.6.29b |
| 20:31.50 | cr2 | high-rez: yes |
| 20:32.03 | *** join/#htc-linux imfloflo_Polaris (n=moi@173.25.71-86.rev.gaoland.net) |
| 20:32.12 | tmzt | cr2: already fixed it for me |
| 20:32.15 | high-rez | Ok, it'll take me a moment to build out - i'm slow :) |
| 20:32.18 | imfloflo_Polaris | ~seen c4software |
| 20:32.21 | apt | c4software <n=Adium@roo49-2-88-161-139-221.fbx.proxad.net> was last seen on IRC in channel #htc-linux, 23h 3m 1s ago, saying: 'The accelerometers ?'. |
| 20:32.21 | tmzt | let me push some patches |
| 20:32.28 | cr2 | <PROTECTED> |
| 20:32.36 | cr2 | LCD_SHARP_2P4_VGA |
| 20:32.49 | cr2 | tmzt: yes. try playwav2 |
| 20:34.22 | cr2 | druidu: i like this code much more than the g1 ;) |
| 20:34.47 | druidu | yep, although it detects my panel as toshiba |
| 20:34.51 | cr2 | AstainHellbring: you have the keyboard on rhod100 ? |
| 20:35.12 | cr2 | druidu: because it knows only 2: |
| 20:35.17 | cr2 | [22:32] <cr2> LCD_TOSHIBA_2P4_VGA |
| 20:35.19 | cr2 | [22:32] <cr2> LCD_SHARP_2P4_VGA |
| 20:35.23 | druidu | I know, I've seen the code |
| 20:35.26 | cr2 | ok |
| 20:35.29 | druidu | sharp seems to be it |
| 20:35.51 | druidu | anyway, panel init sequences... are these independent of the exact hardware configuration? |
| 20:36.12 | druidu | as in, are they specific to one panel type, and if you have that panel that sequence should work? |
| 20:37.10 | cr2 | yes |
| 20:37.25 | cr2 | depends on the mddi client too |
| 20:37.48 | cr2 | sending spi commands for epson is different from toshiba |
| 20:38.59 | tmzt | <PROTECTED> |
| 20:39.24 | cr2 | A1010 reset ? |
| 20:39.25 | druidu | question is, do I really have LCD_SHARP_2P4_VGA? |
| 20:39.40 | tmzt | A5? |
| 20:39.54 | cr2 | f4,66,0,1 |
| 20:39.56 | high-rez | tmzt: Were there changes in git you are pushing right now or should I compile with what I got ? |
| 20:40.08 | cr2 | f4/2= i2c id for A1010 |
| 20:40.12 | tmzt | I'm looking at cr2's changes right now |
| 20:40.24 | druidu | A1010 what's that? |
| 20:40.32 | tmzt | oh, he fixed a comment |
| 20:40.35 | cr2 | druidu: you should check your wince dmesg |
| 20:41.04 | tmzt | I was trying to build without PM and patched it for that, so I need to remove that part |
| 20:41.08 | druidu | no hits... what should I look for? |
| 20:41.16 | tmzt | did somebody fix raph800 fixup? |
| 20:41.30 | tmzt | <PROTECTED> |
| 20:41.33 | druidu | tmzt: git blame? :P |
| 20:41.42 | tmzt | is this worth it or should we build only with PM? |
| 20:41.51 | tmzt | ah, on origin/htc-* |
| 20:42.14 | tmzt | ok, I'll just package my 6150 changes then |
| 20:44.37 | cr2 | druidu: it should be a fresh dmesg, just after the reboot |
| 20:45.15 | druidu | I have one |
| 20:45.44 | druidu | from the very birth of wince kernel in memory :) |
| 20:45.55 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 20:45.56 | cr2 | DPSUS wait 100...ms |
| 20:45.58 | cr2 | -toshiba_common_initial_setup... |
| 20:45.59 | cr2 | toshiba_prim_start... |
| 20:46.01 | cr2 | 02:12:58 [D:DISP] +Panel_StateChange... |
| 20:46.02 | cr2 | 02:12:58 [D:DISP] +HitachiPowerOn... |
| 20:46.17 | druidu | [HDS_Init] Not Hitachi panel. |
| 20:46.36 | druidu | 02:35:54 [D:DISP] g_CurrentPanelType=10... |
| 20:46.37 | druidu | toshiba_prim_start... |
| 20:46.37 | druidu | 02:35:54 [D:DISP] +Panel_StateChange... |
| 20:47.28 | tmzt | people.openezx.org/tmzt/druidu-20090916-raph500-amss6150.patch |
| 20:48.11 | tmzt | sorry, that was to push, not for druidu |
| 20:48.11 | cr2 | druidu: grep -i sharp |
| 20:48.22 | cr2 | Line: 1062. rpc_router_os_wm: IOCTL code = 10303ff |
| 20:48.24 | cr2 | Line: 1069. rpc_router_os_wm: process exiting while threads blocked in driver |
| 20:48.25 | cr2 | Line: 969. rpc_router_os_wm: Calling RPC_PreClose()! |
| 20:48.27 | cr2 | Line: 1015. rpc_router_os_wm: Calling RPC_Close()! |
| 20:48.28 | cr2 | interesting |
| 20:48.30 | tmzt | cr2: can you look at it? are those the changes you wanted? |
| 20:48.37 | tmzt | the bank still doesn't work though |
| 20:48.42 | druidu | want me to push it? |
| 20:48.54 | tmzt | if cr2 is ok with it |
| 20:48.56 | cr2 | tmzt: which bank ? |
| 20:49.00 | tmzt | bank 1 |
| 20:49.04 | tmzt | _fixup |
| 20:49.04 | druidu | cr2: already search all the D:DISP stuff, and looked for sharp too... not much about the panel in there |
| 20:49.49 | druidu | where can I read some solid info on all this bank stuff? :) |
| 20:49.50 | cr2 | tmzt: do you have the second bank ? |
| 20:50.15 | druidu | I feel like I'm writing random numbers in there :P |
| 20:50.24 | cr2 | -static uint32_t qdsp_qtv_lp_queue_offset_table[] = { |
| 20:50.25 | cr2 | +static uint32_t qdsp_image4_queue_offset_table[] = { |
| 20:50.32 | cr2 | it's already committed |
| 20:50.58 | cr2 | tmzt: why is your second bank = 94 MB ? |
| 20:51.05 | cr2 | druidu: which bank ? |
| 20:51.42 | *** join/#htc-linux Ozzy_ (n=ozzy@87.240.204.177) |
| 20:51.50 | tmzt | cr2: I don't know |
| 20:51.59 | druidu | the memory staff |
| 20:52.01 | druidu | *stuff |
| 20:52.14 | tmzt | cr2: I don't think it is, you can ignore that if you want actually |
| 20:52.28 | cr2 | AstainHellbring: you have some interesting i2c devices |
| 20:52.32 | tmzt | I do know the raph500 has less total ram but not the ebi layout |
| 20:52.37 | tmzt | smi/ebi |
| 20:52.47 | cr2 | tmzt: how much ram do you have ? |
| 20:52.56 | *** part/#htc-linux Ozzy_ (n=ozzy@87.240.204.177) |
| 20:53.23 | cr2 | druidu: there are 3 banks: SMI, EBI1 lower and EBI1 upper |
| 20:53.29 | tmzt | I posted it yesterday |
| 20:53.30 | tmzt | from wm |
| 20:53.31 | druidu | what is the relation between the memory chips you have on the board, the start/node/size params of each memory bank, and how linux knows how much memory it has |
| 20:53.44 | cr2 | located at 0x0, 0x10000000 and 0x20000000 respectively |
| 20:53.50 | tmzt | 20:14 < tmzt> wm says raph500 has 113.29mb ram |
| 20:53.50 | tmzt | 20:14 < tmzt> ram size 192 |
| 20:54.07 | druidu | dmesg tells me: [K] SMI RAM Type = 64MB (2) |
| 20:54.13 | cr2 | tmzt: 192 usually means you don't have the second EBI banl |
| 20:54.13 | tmzt | on? |
| 20:54.22 | tmzt | no bank at 0x20000000? |
| 20:54.32 | cr2 | tmzt: you have 64(SMI) + 128 (EBI) |
| 20:54.34 | tmzt | so the first bank is 0x0 not 0x10000000? |
| 20:54.45 | cr2 | tmzt: SMI !!! |
| 20:55.01 | tmzt | uh, ok |
| 20:55.04 | cr2 | the first bank in linux is 0x10000000 |
| 20:55.06 | tmzt | but what address? |
| 20:55.15 | tmzt | I thought msm ram was always at 0x10000000 |
| 20:55.16 | cr2 | we can use SMI bank as the first bank, |
| 20:55.33 | druidu | so SMI bank can't be used by linux as general purpose memory, right? |
| 20:56.03 | cr2 | but then you need to disable MPU for SMI spl area, and be careful not to kill AMSS @0xa00000+, oemsbl @0x900000, and such. |
| 20:56.25 | cr2 | druidu: if you are careful, and know what you are doing, you can. |
| 20:56.37 | cr2 | we actually use parts it it already. |
| 20:57.26 | druidu | what I don't see is why do we need to tell linux this stuff? isn't there a process by which it can figure out this on its own? |
| 20:58.11 | cr2 | druidu: no. |
| 20:58.31 | cr2 | since you don't have 'pc bios' ;) |
| 20:58.57 | druidu | ok, and just by telling linux in _fixup that hey, look there, you have 2 banks of memory... they magically become available? :) |
| 20:58.58 | cr2 | acpi, dmi and other intel innovations. |
| 20:59.39 | cr2 | yes, linux then will create the virtual memory map, according to these directions |
| 21:00.22 | druidu | as I understand it, the physical address is fixed by the hardware wiring, so we have to tell linux what memory banks it has (address and size) right? |
| 21:00.40 | cr2 | the address space on msm is fragmented, because of the strange amss setup |
| 21:00.49 | buildmanager | cr2: Booting http://bourg.net/raph_images/zImage_00ffb6cabc39f85a3e87feb1f4df5953df55226a now |
| 21:00.58 | tmzt | cr2: where's the first bank then? |
| 21:01.02 | cr2 | druidu: yes |
| 21:01.06 | tmzt | and what size is it |
| 21:01.47 | cr2 | tmzt: it's out decision. right now it's @0x10000000 and is 96MB (afair) |
| 21:02.15 | cr2 | tmzt: we have booted the kernel iwth 1 bank @0x20000000 128MB on raph100 with NetRipper |
| 21:02.19 | tmzt | but I have 192, if there's only one bank what size is it? |
| 21:02.24 | druidu | it's not really our decision, we're talking about physical addresses are we not? |
| 21:02.45 | cr2 | tmzt: you have 64MB @0x0 + 128MB@0x10000000 |
| 21:02.55 | druidu | 64 being SMI |
| 21:02.59 | tmzt | ok |
| 21:02.59 | cr2 | but it's fragmented by the amss MPU'd areas |
| 21:03.04 | cr2 | yes |
| 21:03.10 | tmzt | so START is 0x0? |
| 21:03.15 | cr2 | the memory map for raph100is in wiki |
| 21:03.27 | cr2 | yes. as on any same processor. |
| 21:03.37 | cr2 | i.e. !=x86 ;) |
| 21:03.44 | cr2 | s/same/sane/ |
| 21:03.55 | tmzt | PHYS_OFFSET |
| 21:04.28 | cr2 | 0x10000000 |
| 21:04.37 | cr2 | <PROTECTED> |
| 21:04.42 | tmzt | so I don't have the bank at 0x0 enabled? |
| 21:04.46 | cr2 | you can redefine it. |
| 21:04.56 | cr2 | no. |
| 21:05.08 | cr2 | unless you really know what you are doing. |
| 21:05.33 | tmzt | but ce uses it, I don't understand why it won't work in linux |
| 21:05.40 | high-rez | Hmm, those power management fixes really helped things out. My raph110 lasted around 12 hours last night on battery and still had power when I rebooted it to try the new kernel |
| 21:05.47 | tmzt | I think raph500 only uses 32MB for smi/smem/smsm |
| 21:05.49 | cr2 | with 8MB free SMI ram, it is possible to put the "sane" kernel there. |
| 21:06.05 | cr2 | tmzt: diam has 64 |
| 21:06.09 | tmzt | so how much ram is in bank 1? |
| 21:06.23 | tmzt | yes, but this is msm7500a, not 7501a |
| 21:06.25 | cr2 | tmzt: raph has 288 = 32(SMI)+128+128 |
| 21:06.39 | high-rez | cr2: Clean build of your latest commit is working fine on my raph110 |
| 21:06.43 | cr2 | 0 vs. 1 is cosmetics |
| 21:06.45 | tmzt | cr2: not mine |
| 21:07.13 | cr2 | and the ram size does not dpeend on the cpu anyway. unless you want _too_ much ram :) |
| 21:07.27 | cr2 | high-rez: can you post the full log ? |
| 21:08.25 | cr2 | tmzt: you should have the same ram setup as diam100 |
| 21:08.32 | tmzt | 192mb? |
| 21:08.46 | high-rez | I'm honestly not sure how to do that. Do I need to enable a log in haret - or copy the output of dmesg ? |
| 21:08.51 | cr2 | yes |
| 21:09.01 | cr2 | high-rez: dmesg |
| 21:09.17 | tmzt | <PROTECTED> |
| 21:10.32 | cr2 | tmzt: be careful. you should check the other board-htcdiamond.h ram settings |
| 21:10.47 | cr2 | tmzt: i think it's better to check playwav2 :) |
| 21:10.57 | cr2 | if your kernel boots |
| 21:11.01 | tmzt | I would if I can get the kernel to boot and not shut off |
| 21:11.06 | tmzt | so I will disable bank 2 again |
| 21:11.15 | cr2 | hehe. time to enable cam |
| 21:11.31 | cr2 | tmzt: if you have 192MB ram, you don't have the second bank. |
| 21:12.02 | cr2 | afaik there are 2 configs (in real life) |
| 21:12.06 | cr2 | 192 and 288 |
| 21:12.20 | cr2 | 192=64+128, and 288=32+128+128 |
| 21:13.27 | cr2 | root@htcraphael:~# free |
| 21:13.49 | cr2 | <PROTECTED> |
| 21:13.49 | cr2 | Mem: 216352 27960 188392 0 24 22096 |
| 21:13.49 | cr2 | -/+ buffers/cache: 5840 210512 |
| 21:13.49 | cr2 | Swap: 0 0 0 |
| 21:14.33 | cr2 | with careful setup (more "linux" banks) this number can be higher. |
| 21:16.13 | cr2 | druidu: it's a bit overzealous -> |
| 21:16.17 | cr2 | CONFIG_MSM_AMSS_VERSION=5200 |
| 21:16.19 | cr2 | CONFIG_MSM_AMSS_VERSION_WINCE=y |
| 21:16.20 | cr2 | CONFIG_MSM_AMSS_VERSION_5200=y |
| 21:17.03 | cr2 | i think we may get rid of the last 2 |
| 21:17.43 | cr2 | <PROTECTED> |
| 21:17.54 | tmzt | ok, it vibrates and stops on the htcfb |
| 21:17.57 | tmzt | does not shut off |
| 21:17.59 | cr2 | <PROTECTED> |
| 21:18.16 | cr2 | <PROTECTED> |
| 21:18.26 | *** join/#htc-linux townkat (n=town@86.127.6.111) |
| 21:18.43 | townkat | hi everyone |
| 21:19.24 | cr2 | tmzt: check ramconsole, or how it is callled |
| 21:19.41 | tmzt | ah, what's the haret method for that? |
| 21:20.46 | cr2 | ask druidu |
| 21:20.59 | tmzt | oh, last time it did this usb0 came up but I couldn't log in |
| 21:21.13 | tmzt | this time (accidently booted) it didn't vibrate |
| 21:21.26 | cr2 | Line: 969. rpc_router_os_wm: Calling RPC_PreClose()! |
| 21:21.26 | cr2 | Line: 976. rpc_router_os_wm: client has no closing signal! |
| 21:21.26 | cr2 | Line: 1012. rpc_router_os_wm: client has no closing signal! |
| 21:21.26 | cr2 | Line: 1015. rpc_router_os_wm: Calling RPC_Close()! |
| 21:21.27 | tmzt | druidu: ramconsole? |
| 21:21.50 | druidu | yeah |
| 21:21.53 | druidu | what device do you have? |
| 21:22.09 | tmzt | raph500 |
| 21:22.20 | tmzt | could ramconsole be why it crashes? |
| 21:22.46 | tmzt | ok, I'll disable it for now |
| 21:22.52 | druidu | for diam100 at least, dzo configured the console to store linux dmesg at 0xe000, so after soft reset it's still there and can be read from haret: pwf log.txt 0xe0000 0x20000 |
| 21:23.04 | druidu | depends, not sure |
| 21:23.12 | druidu | don't think it's enabled for board raphael |
| 21:24.06 | *** join/#htc-linux stickboy (n=anonymou@128.153.210.13) |
| 21:25.59 | cr2 | CONFIG_MACH_HTCRAPHAEL=y |
| 21:26.00 | cr2 | CONFIG_MACH_HTCRAPHAEL_CDMA=y |
| 21:26.02 | cr2 | CONFIG_MACH_HTCDIAMOND=y |
| 21:26.03 | cr2 | CONFIG_MACH_HTCDIAMOND_CDMA=y |
| 21:26.18 | cr2 | i thought the raph and diam are mutually exclusive ? |
| 21:26.23 | tmzt | +CONFIG_MACH_HTCRAPHAEL_CDMA500=y ? |
| 21:28.14 | cr2 | # CONFIG_FB_MSM_REFRESH is not set |
| 21:28.28 | tmzt | no using X right now |
| 21:28.36 | cr2 | not yet |
| 21:28.44 | cr2 | X=Xfbdev ? |
| 21:28.55 | tmzt | yes |
| 21:28.58 | cr2 | so it will fail for qtopia too ? |
| 21:29.08 | tmzt | I think, depends on how it detects |
| 21:29.19 | tmzt | I have some other patches for fbset ioctl as well |
| 21:29.21 | cr2 | <PROTECTED> |
| 21:29.22 | tmzt | on people |
| 21:29.34 | tmzt | I mean detects the support resolutions |
| 21:29.47 | tmzt | I don't work with QWS so I don't really know |
| 21:29.49 | cr2 | need to fix the resume/suspend first |
| 21:30.17 | tmzt | actually I still have PM disabled |
| 21:30.21 | tmzt | this won't work I think |
| 21:30.50 | cr2 | # CONFIG_SENSORS_MT9T013 is not se |
| 21:31.12 | cr2 | sensors is weird |
| 21:31.28 | druidu | cr2: they're not, diamond only has board-htcdiamond.[ch] different, uses raphael files for the rest |
| 21:31.44 | druidu | so there's no reason to be exclusive, .c is only a bunch of static functions |
| 21:31.55 | cr2 | druidu: enabling both does not make much sense. |
| 21:32.07 | cr2 | just wastes ram :) |
| 21:32.11 | tmzt | well, nothing in ramconsole |
| 21:32.12 | druidu | it does, look at the builds and packs on the forum |
| 21:32.14 | tmzt | but I disabled it I think |
| 21:32.16 | druidu | it's good for testing :) |
| 21:32.22 | tmzt | I need to revert my PM stuff and try again |
| 21:32.23 | cr2 | ok |
| 21:32.33 | druidu | of course, having a 30 MB kernel with debug info is not useful either, but we need it for now :P |
| 21:33.20 | druidu | tmzt: if there's no platform device data in the board file, the ramconsole driver won't be loaded |
| 21:33.28 | druidu | also, dzo patched it so it will load earlier |
| 21:33.30 | cr2 | druidu: if we have made bt work, i would have happily switched to .29 from codeaurora :) |
| 21:33.48 | tmzt | ok, so can I disable wakelock stuff and the reset call (for resume) without disabling the CONFIG_PM? |
| 21:33.55 | druidu | I think it now works with early ram console + specifying the buffer address / size in the kernel config |
| 21:34.13 | druidu | tmzt: the htc powersink driver needs wakelock |
| 21:34.22 | druidu | if you don't need that, you can disable wakelock |
| 21:34.30 | cr2 | druidu: do we need this driver ? |
| 21:34.33 | tmzt | what is that? |
| 21:34.36 | tmzt | for chargin? |
| 21:34.41 | tmzt | what's the .config option? |
| 21:34.43 | druidu | don't know if it even works :) |
| 21:34.48 | cr2 | it's some google innovation :) |
| 21:34.54 | druidu | in drivers / misc / android |
| 21:35.00 | cr2 | for tracking device power consumption |
| 21:35.07 | druidu | cr2: you make innovation sound so negative :) |
| 21:35.28 | cr2 | LOL |
| 21:36.18 | cr2 | druidu: they can innovate, but please stick to the linux kernel standards where appropriate. |
| 21:36.53 | tmzt | cr2: druidu: are my 6150 changes pushable? I've reverted my local with a branch -m and pulled origin |
| 21:37.03 | tmzt | moved with branch -m |
| 21:37.17 | cr2 | just breaking compatibility without any good reason, and talking about innovation microsoft-style is just plain dumb. |
| 21:37.33 | druidu | well, `git apply` never works for me anyway :) |
| 21:37.38 | cr2 | tmzt: yes. |
| 21:37.48 | druidu | I think so, I can push`em if you want |
| 21:37.55 | tmzt | druidu: can you push just the 6150 changes, I'll pm you the details |
| 21:38.06 | druidu | make the final patch and pastebin it |
| 21:38.43 | cr2 | madCoder`: ping |
| 21:38.44 | druidu | and maybe I'm doing something really wrong all the time... but shouldn't `git format-patch` produce patches `git apply` should recognize? :)) |
| 21:40.47 | kri5 | druidu: yes |
| 21:41.15 | cr2 | CONFIG_SENSORS_PCA963X=y |
| 21:41.20 | cr2 | hm. why is that ? |
| 21:41.30 | kri5 | git format-patch -o outputdir origin |
| 21:42.48 | cr2 | CONFIG_CMDLINE="mem=76M console=ttyMSM2,115200n8" |
| 21:42.52 | cr2 | strange cmdline |
| 21:43.18 | tmzt | where? |
| 21:44.42 | cr2 | .sensor_pwd |
| 21:44.46 | cr2 | in defconfig |
| 21:45.41 | cr2 | druidu: i'd like to add the cam |
| 21:46.49 | cr2 | hmm. where is my bt headset. didn't see it in the last 6 months. |
| 21:48.43 | druidu | kri5: it just seems to me patch -p1 does a much better job at applying the patch... git apply complains *all the time* that something's wrong with the patch |
| 21:49.03 | druidu | cr2: we know gpios and power stuff for cam? |
| 21:49.18 | cr2 | <PROTECTED> |
| 21:49.19 | druidu | the driver should be ok I guess |
| 21:49.19 | cr2 | <PROTECTED> |
| 21:49.21 | cr2 | <PROTECTED> |
| 21:49.24 | cr2 | the first 2 , yes |
| 21:49.47 | druidu | try the power it on in wince tricky? |
| 21:49.48 | druidu | :) |
| 21:50.15 | kri5 | druidu: i always did with git format patcg and git apply |
| 21:50.33 | kri5 | i made some patche for vlc this way |
| 21:51.14 | townkat | sry for interrupting you |
| 21:51.15 | townkat | i have a blackstone, and as you probably know noone managed to make the latest updates available on our device (ex. audio) |
| 21:51.15 | townkat | i would be very hapy if someone would like to make it work on blackstone over vnc or other remote app |
| 21:51.15 | townkat | would it be posible this way? |
| 21:51.15 | townkat | would anyone do this for us blackstone users please ? |
| 21:51.16 | townkat | thnx alot |
| 21:51.46 | cr2 | townkat: why not compile the latest kernel ? |
| 21:51.54 | townkat | not experience |
| 21:51.58 | townkat | xp here |
| 21:52.02 | townkat | affraid of linux |
| 21:52.04 | townkat | :D |
| 21:52.08 | Captnoord | lol..... |
| 21:52.10 | Captnoord | its easy... |
| 21:52.16 | rafyvitto | virtual pc |
| 21:52.18 | rafyvitto | xD |
| 21:52.19 | Captnoord | i'm also rusted to win somehow |
| 21:52.23 | cr2 | Captnoord: linload.exe |
| 21:52.24 | townkat | thats what i was thinkin of |
| 21:52.45 | Captnoord | cr2? where? |
| 21:52.48 | Captnoord | hehe |
| 21:52.50 | cr2 | i think we should setup the autobuild for our targets |
| 21:53.22 | cr2 | Captnoord: if you are compiling something for testing, linload.exe is the best. imho |
| 21:53.41 | Captnoord | hehe nah usualy I just load ubuntu.... |
| 21:53.57 | Captnoord | but now I have to recover from my windows 7 install |
| 21:53.58 | Captnoord | lol |
| 21:54.01 | cr2 | when i read about the boot troubles with haret on xda-dev, it's just pityful. |
| 21:54.38 | townkat | but i am affraid that i make all the things, virtual pc, geting everythingdone, and then stuck to some error |
| 21:54.39 | cr2 | Captnoord: it was a deadly sin. |
| 21:55.01 | Captnoord | cr2 the thing is.... people who aren't experienced anough shouldn't use it |
| 21:55.01 | townkat | some people already tried to load the latest build on blackstone ant cant get sound |
| 21:55.15 | cr2 | townkat: i can try to compile it now. |
| 21:55.40 | townkat | wow, u got a device ? blackstone? |
| 21:55.46 | townkat | :) |
| 21:56.19 | druidu | kri5: I got a lot of `whitespace errors` (git doesn't like spaces at end of lines, or spaces followed by tabs)... and there were some mismatches between my current files and the patche's base |
| 21:56.50 | townkat | cr2,have u got a blackstone ? :D |
| 21:56.53 | druidu | patch -p1 usually works, but git apply won't work unless it's a patch that applies 100% correct |
| 21:57.09 | cr2 | lol. i can compile kovsky and blac100 in the same kernel. insane. |
| 21:57.10 | kri5 | druidu: that normal, each project has its coding style |
| 21:57.31 | kri5 | you must adapt your editor preference to match |
| 21:57.43 | cr2 | townkat: i can crosscompile for any target. |
| 21:57.55 | townkat | hmm.. that would be nice |
| 21:58.08 | townkat | thank you |
| 21:58.12 | druidu | I'm not a git guru, but I did learn a lot while playing with the kernel git :) |
| 21:58.25 | kri5 | :) |
| 21:59.00 | cr2 | arch/arm/mach-msm/board-htcblackstone-mmc.c:365: warning: âhtcraphael_cdma_mmc_pdataâ defined but not used |
| 21:59.10 | *** join/#htc-linux root2 (n=root@rgnb-5d87dc2d.pool.mediaWays.net) |
| 21:59.15 | druidu | I just find it very confusing that git is so good at some things, but fails miserably at others (like applying a patch that worked perfectly with patch -p1, and it was a patch generated by git itself!) |
| 21:59.53 | *** join/#htc-linux unholy (n=IceChat7@24.54.253.34) |
| 22:00.01 | Captnoord | not everything is perfect |
| 22:00.12 | townkat | was audio confirmed on Kovsky ? |
| 22:00.50 | cr2 | townkat: the audio config is not in the kenrel |
| 22:01.06 | cr2 | druidu: time to patch blac100 ? |
| 22:01.21 | druidu | yeah, gimme |
| 22:02.14 | cr2 | many things are missing there. |
| 22:02.55 | druidu | well, it might be best if someone with kovsky made all the changes, tested them, then generated a patch |
| 22:02.56 | unholy | hey guys any reason y wifi is not working on kaiser with the android 1.6 img |
| 22:02.59 | kri5 | that is what i thought when i tried to compile it |
| 22:03.25 | Captnoord | unholy: maybe because android 1.6 is release just a couple of days ago? |
| 22:03.53 | Captnoord | this isn't a toy store where everything works out of the box |
| 22:03.54 | Captnoord | :P |
| 22:04.03 | Captnoord | I wished it was ... but it isn |
| 22:04.04 | Captnoord | t |
| 22:04.07 | unholy | dang it XD |
| 22:04.12 | cr2 | druidu: i've added snd, but afair usb is broken. need to check the gpios. |
| 22:04.13 | druidu | and it would be useful to also update device configs from time to time, especially when infrastructure is changed and old configs wouldn't work anymore without updates |
| 22:04.43 | Captnoord | cr2 you'r checking the cam stuff..? |
| 22:05.23 | druidu | cr2: btw, do the codeaurora guys have a dictionary with all the weird codenames they named they branches with? |
| 22:05.24 | druidu | they have like every possible flavor in there |
| 22:05.55 | cr2 | druidu: no idea. |
| 22:06.11 | druidu | cinnamon? maybe try an apple... or why not a carrot? :) |
| 22:10.13 | cr2 | hm. where do i upload linload.exe ? |
| 22:11.01 | *** join/#htc-linux Amaranth (n=travis@ubuntu/member/Amaranth) |
| 22:11.33 | toer | http://dump.no/ |
| 22:11.46 | cr2 | an .exe packer for linload.exe would be a good idea too |
| 22:12.20 | townkat | cr2, i cant receive files on this mirc i have, i setup a ftp right now |
| 22:12.21 | townkat | pls wait |
| 22:13.33 | cr2 | toer: uploading |
| 22:14.22 | cr2 | set MTYPE 1910 |
| 22:14.24 | cr2 | hmm |
| 22:14.58 | cr2 | toer: lol |
| 22:15.04 | cr2 | toer: There was an error uploading your file: MS-DOS/Windows Executable files are not allowed to send without packing them password protected. (rar/7z/zip/bz2 etc.) |
| 22:15.19 | toer | heh |
| 22:16.15 | cr2 | what is the blac100 mtype ? |
| 22:16.31 | cr2 | what does my haret say ... |
| 22:16.38 | druidu | I synced the 2.6.29 branch with upstream, google merged some of the aurora code http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm-2.6.29 :) |
| 22:17.13 | druidu | but it's pretty obvious 2.6.27 branch is dead, development wise |
| 22:17.18 | cr2 | hehe. blac is not in the list |
| 22:17.21 | townkat | set mtype 2030 |
| 22:17.27 | cr2 | ok |
| 22:17.36 | townkat | in the default.txt i have with the old build |
| 22:17.53 | cr2 | we need to patch haret for a more sane mtype management. |
| 22:18.02 | cr2 | townkat: pastebin |
| 22:18.10 | cr2 | i'll attach it to .exe |
| 22:18.28 | townkat | what should i paste on pastebin ? |
| 22:18.33 | kri5 | cr2: apart the kernel image, what do you use on your board? |
| 22:18.38 | cr2 | townkat: default.txt |
| 22:18.43 | druidu | maybe a gui for default.txt and distribute images with gui + a simple linload.exe |
| 22:19.05 | cr2 | kri5: linload.exe is zimage+ramdisk+default.txt |
| 22:19.16 | townkat | http://pastebin.com/m32417b38 |
| 22:19.20 | kri5 | cr2: ok |
| 22:19.29 | townkat | no |
| 22:19.30 | townkat | wait |
| 22:19.31 | cr2 | kri5: so you can ssh over usb, and call playwav2 |
| 22:19.33 | kri5 | cr2: so then you just need the android system for example |
| 22:19.45 | kri5 | cr2: ok, via usbnet |
| 22:19.50 | cr2 | yes |
| 22:19.57 | cr2 | but you need ssh |
| 22:20.05 | townkat | http://pastebin.com/m1c240d50 |
| 22:20.23 | cr2 | and to transfer a sond file to play. |
| 22:20.32 | kri5 | cr2: if you want me to do some test for you on blac100 |
| 22:20.43 | kri5 | cr2: i'm very familiar with this stuff |
| 22:20.44 | cr2 | dcordes should add some .wav file to initramfs. |
| 22:20.50 | cr2 | ok |
| 22:21.00 | kri5 | i'm just not ( yet ) a kernel dev :) |
| 22:21.06 | kri5 | but i'm a dev |
| 22:26.01 | kri5 | not good at RE stuff |
| 22:26.27 | cr2 | kri5: if the linload.exe will boot, we will commit the patch |
| 22:27.23 | kri5 | ok |
| 22:27.28 | cr2 | ~ping townkat |
| 22:27.29 | apt | pong townkat |
| 22:28.48 | cr2 | actually it's so simple, we can commit it as is |
| 22:28.54 | cr2 | druidu: not sleeping ? |
| 22:29.13 | druidu | actually, I was just about to lie down a bit, few hours :P |
| 22:29.23 | druidu | haven't slept last night cause I had to study |
| 22:30.29 | cr2 | druidu: https://privatepaste.com/2109LriI6u |
| 22:30.42 | cr2 | i think i'll got to sleep soon too |
| 22:31.47 | cr2 | kri5: i don't understand why there are usb errors in dmesg |
| 22:32.00 | cr2 | kri5: the reset gpio needs to be checked. |
| 22:32.13 | druidu | $ git apply ../cr2-patch |
| 22:32.14 | druidu | ../cr2-patch:9: trailing whitespace. |
| 22:32.14 | druidu | #if 0 |
| 22:32.14 | druidu | ../cr2-patch:17: trailing whitespace. |
| 22:32.14 | druidu | #endif |
| 22:32.14 | druidu | ../cr2-patch:25: trailing whitespace. |
| 22:32.20 | druidu | kri5: this is what I was talking about |
| 22:32.53 | druidu | I cannot understand what git things is wrong with the patch... |
| 22:32.59 | kri5 | cr2: i have to go for now, but i'll see with you tomorrow if you want |
| 22:33.06 | cr2 | druidu: ^M ? |
| 22:33.10 | kri5 | druidu: don't know what's wrong |
| 22:33.16 | druidu | actually, spaces at end of line |
| 22:33.32 | druidu | :%s/ $//g |
| 22:33.37 | druidu | that's why I love vi :) |
| 22:33.47 | kri5 | druidu: me too |
| 22:33.56 | kri5 | druidu: and i also use qt-creator for now :) |
| 22:34.13 | druidu | the weird thing now is that after deleting those "extra" spaces I get a corrupt patch message |
| 22:37.51 | druidu | cr2: you where right, it was the ^M char, but vim didn't show any... I suspect only some lines had it |
| 22:37.56 | cr2 | 64K for upload |
| 22:38.19 | cr2 | druidu: it's some weirdness of privatepaste |
| 22:38.24 | druidu | maybe it did a diff between a unix file and a dos file, and only reported changed lines |
| 22:38.25 | kri5 | druidu: vim only show something like (DOS Mode) in status bar |
| 22:38.38 | druidu | how do I switch off dos mode? |
| 22:38.50 | druidu | used dos2unix from cmd line 'cause ^M didn't show up in vim |
| 22:38.56 | kri5 | and you have the dos2unix command line tool, which convert you a dos file to a unix file |
| 22:38.59 | kri5 | :D |
| 22:39.22 | kri5 | druidu: don't really know, i always use vim with unix files :D |
| 22:39.50 | cr2 | you can use 'tr' |
| 22:39.58 | kri5 | also |
| 22:40.47 | kri5 | or sed :p |
| 22:41.50 | druidu | true, what I don't like about sed is that I need to use a temp file :) |
| 22:42.07 | druidu | cat file | sed > file is dangerous, I know I erased some file by doing that |
| 22:42.50 | druidu | hehe, ssh-copy-id rules :) |
| 22:43.13 | druidu | patch commited |
| 22:43.54 | cr2 | thanks |
| 22:44.09 | druidu | welcome |
| 22:44.10 | cr2 | kri5: compile the kenrel ? |
| 22:44.21 | druidu | off to bed, 'night |
| 22:44.25 | kri5 | i'm quite sleeping right know :/ |
| 22:44.31 | druidu | let's hope patches doesn't break the whole thing :P |
| 22:45.27 | cr2 | good night |
| 22:45.31 | kri5 | cr2: which branch? still 2.6.27? |
| 22:45.38 | druidu | yep |
| 22:45.54 | druidu | that's our active dev branch (for now h3h3 :P) |
| 22:45.58 | kri5 | ok |
| 22:46.10 | cr2 | will switch to codeaurora soon |
| 22:46.25 | druidu | waiting to get back his device :P |
| 22:46.41 | kri5 | oki doki |
| 22:46.41 | druidu | hopefully with a fixed touchscreen |
| 22:46.58 | *** part/#htc-linux druidu (n=druidu@78.97.155.94) |
| 22:47.00 | cr2 | druidu: i may rewrite clock-wince.c during this time :) |
| 22:47.10 | kri5 | i really doesn't have the eyes that much open to do anything tonight |
| 22:47.13 | kri5 | see ya tomoroww |
| 22:47.19 | kri5 | tomorrow* |
| 22:47.24 | kri5 | good night all ;) |
| 22:49.46 | *** join/#htc-linux MethoS-- (n=clemens@134.102.106.250) |
| 22:53.42 | townkat | would andlinux be enough to ssh to my blackstone ? |
| 22:53.47 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) |
| 22:57.04 | Squarc | townkat: I think so yes |
| 22:57.31 | townkat | how do you do it on native linux |
| 22:57.35 | townkat | on win ssh need an ip |
| 22:57.41 | townkat | usb does not get an ip |
| 22:57.47 | townkat | ? |
| 22:58.00 | townkat | how do you do it on native linux ? |
| 23:02.49 | Squarc | ehm |
| 23:02.53 | Squarc | well you have andLinux there? |
| 23:03.04 | Squarc | I'm not sure but; |
| 23:03.05 | townkat | i can install it in minutes |
| 23:03.18 | townkat | but i think you need usb maping to andlinux |
| 23:03.22 | townkat | and andlinux cant do that |
| 23:03.31 | Squarc | yes.. I'm afraid so,.. though I'm not sure |
| 23:03.52 | townkat | i am googleing right now for a solution |
| 23:04.25 | Squarc | It would be logical that windows still has controll of the device... andLinux probably only has acces to the device contents (when it's a mass storage device) |
| 23:04.43 | Squarc | but, cant you configure a IP using ipconfig on windows? |
| 23:04.55 | Squarc | or ifconfig.. ? always confused |
| 23:04.59 | townkat | i dont know |
| 23:05.10 | townkat | how do i do that? |
| 23:05.13 | townkat | ipconfig .. ? |
| 23:05.14 | kri5 | on linux, you can use usbnet, when your device provide a network access through usb |
| 23:05.23 | kri5 | it is recognised by most distribs |
| 23:05.24 | mdrobnak | Hi all. |
| 23:05.51 | rafyvitto | hello mdrobnak |
| 23:06.19 | Squarc | kri5; he doesnt have linux install |
| 23:06.32 | mdrobnak | I think the RIL does not like when you move from a 3G to a non-3G area. |
| 23:06.51 | kri5 | i think he can't do this on windows |
| 23:06.51 | Squarc | townkat: I'm not sure on windows.... I dont know if it supports usbnet (net connection trough USB with you're phone.. that connection is used to start ssh session) |
| 23:06.55 | kri5 | but i dot know |
| 23:07.02 | Squarc | kri5: andLinux ? |
| 23:07.06 | Squarc | http://www.andlinux.org/index.php |
| 23:07.39 | kri5 | Squarc: never heard about it |
| 23:07.57 | Squarc | ok |
| 23:08.11 | townkat | i used it some times ago to run an linux only app |
| 23:08.13 | Squarc | townkat: I think you need a linux install (native, solo) |
| 23:08.19 | townkat | yup |
| 23:08.24 | townkat | i think that too |
| 23:08.42 | Squarc | you should be able to easily setup a dual boot |
| 23:08.48 | Squarc | just make sure you know how to do that |
| 23:08.48 | townkat | or a virtualpc, cause that can "steal" the usb port from xp as i remember |
| 23:09.02 | Squarc | oh, I dont know about that.. but it sounds ok |
| 23:09.14 | Squarc | as long as you have full controll of the usb port |
| 23:09.21 | townkat | yup |
| 23:09.35 | townkat | that is the ideea i think |
| 23:09.37 | townkat | thnx alot |
| 23:09.42 | Squarc | you need to change the IP adress (at which the device is located) manually so it matches the subnet |
| 23:09.57 | Squarc | then you can telnet (or ssh if it runs on the phone) to that IP adress |
| 23:10.11 | Squarc | Xubuntu supports it for sure |
| 23:10.22 | Squarc | and other Ubuntu variants |
| 23:10.24 | mdrobnak | cr2: (I haven't looked at the logs yet, please forgive me) Do you have any idea why the 2nd bank isn't easily enabled for the RAPH? |
| 23:10.33 | Squarc | good luck ;) |
| 23:10.59 | townkat | thnx alot |
| 23:11.20 | townkat | ups |
| 23:11.56 | townkat | is there a msm usb driver for xp ? |
| 23:12.11 | townkat | i think this is the usb network you use in linux |
| 23:13.06 | dzo | with the gadget driver there is but i think we're still using the function driver. |
| 23:13.34 | dzo | use adb instead. |
| 23:13.45 | townkat | adb ? |
| 23:13.59 | dzo | (unless you're not using android) |
| 23:14.11 | townkat | nope |
| 23:14.14 | townkat | for blackstone |
| 23:14.32 | townkat | cr2 made an .exe for my blackstone |
| 23:14.38 | townkat | int now shos angstrom |
| 23:14.44 | townkat | he told me to ssh into it |
| 23:14.49 | townkat | thats what i try now |
| 23:14.51 | townkat | :) |
| 23:14.57 | dzo | then you need a linux box. |
| 23:15.29 | mdrobnak | Oh, hey dzo. Any further ideas on the memory thing with RAPH? |
| 23:15.57 | dzo | no, where does it crash? |
| 23:16.49 | mdrobnak | At the android logo, first frame of animation |
| 23:16.49 | dzo | perhaps there's a problem doing dma to the 2nd bank or something like that. |
| 23:17.47 | dzo | and is there anything in the dmesg from the ram console? |
| 23:17.52 | rafyvitto | guys the lcd screen is the same one for all the raph variants right? |
| 23:18.00 | dzo | i assume it locks up completely. |
| 23:18.24 | dzo | rafyvitto: no, i think there are a few different panel types. |
| 23:18.38 | mdrobnak | the ram console was empty |
| 23:18.39 | rafyvitto | http://www.gsm4world.us/htc-touch-pro-htc-raphael-100-sprint-diamond-oem-lcd-screen-d-02553_405.html |
| 23:18.39 | dzo | and also 2 mddi clients. |
| 23:18.45 | mdrobnak | that command you sent me did nothing |
| 23:18.48 | rafyvitto | these guys assume there all the same |
| 23:19.00 | rafyvitto | im going to need to buy a lcd screen soon |
| 23:19.05 | rafyvitto | mines dieing |
| 23:19.28 | mdrobnak | dzo: Also, I think the problem with the RIL is the Unsolicited information parser. |
| 23:19.45 | rafyvitto | the screen si blurry white,and the bottom of it like start to blink from time to time |
| 23:19.51 | dzo | the panel is detected by software so you can replace it with a different one. |
| 23:20.49 | dzo | mdrobnak: would you like to fix it! |
| 23:21.40 | rafyvitto | im asking cause i dont want to risk buying a lcd screen, and then when i take my phone apart the lcd connector's dont match >< |
| 23:22.03 | mdrobnak | dzo:If I knew how, I'd do my best... I'm not trying to be an ass, if thats how you are taking it.. |
| 23:22.26 | dzo | mdrobnak: are you sure you got the ram console correctly? after a reset, start haretconsole and type: pwf kdmesg.txt 0xe0000 0x20000 |
| 23:22.31 | Squarc | hey |
| 23:23.20 | dzo | mdrobnak: sorry, i just meant i don't think i will have time to fix it, would be great if you could try. |
| 23:23.37 | mdrobnak | I didn't have a .txt on it last time...does that command dump it to a file? |
| 23:23.41 | mdrobnak | If so, I didn't see the file |
| 23:23.41 | mdrobnak | lol |
| 23:23.59 | dzo | yes, it makes a file, the name is not important. |
| 23:24.03 | mdrobnak | Oops. |
| 23:24.09 | mdrobnak | Then there may be something there :-) |
| 23:24.15 | Squarc | I just got a major fail on my DIAM100... just builded the latest repos.. fired it up on my phone and worked with it for a while.. (android)... did some video testing etc.. well... then I got the com.loopt freeze (as usual, always have that).... and putted my phone on my desk.. few minutes later I heard the windows mobile bootsound... indicating that linux had a panic or in some other way rebooted the device.. need logs? |
| 23:25.13 | mdrobnak | And, it's ok. I *will* try and look at the code, but no guarantees... |
| 23:25.25 | mdrobnak | give me a sec to grab the file off the device |
| 23:29.11 | rafyvitto | im downloading the service manual |
| 23:30.54 | rafyvitto | holy crap , this si the holy grail of the raphs xD |
| 23:30.56 | mdrobnak | dzo: hmm. All I have is a junk file. |
| 23:30.57 | rafyvitto | is* |
| 23:31.54 | mdrobnak | I'll try booting it again, and trying that command again to see if I get anything usable. |
| 23:32.08 | dzo | mdrobnak: make sure the power stays on after the crash, just a soft reset. |
| 23:34.20 | mdrobnak | yeah thats what I did..with the stylus |
| 23:34.36 | dzo | that should work. |
| 23:35.02 | dzo | is ram console enabled on raph, perhaps not, i'tt check. |
| 23:35.29 | dzo | ah, it's not, that's the problem. |
| 23:35.43 | mdrobnak | argh |
| 23:35.51 | mdrobnak | Is the code there, or not written? |
| 23:37.08 | dzo | easy to add, copy the ram_console_device from the diamond board file and add &ram_console_device to the devices array. |
| 23:38.03 | dzo | in board_htcdiamond.c copy lines 310-316 and line 351 to the raph board file. |
| 23:38.14 | mdrobnak | So much to do, it's hard to focus on what to work on. |
| 23:38.38 | dzo | and make sure it's enabled in your config. (under devices..misc i think) |
| 23:39.14 | mdrobnak | I need ram_console_resource and device right? |
| 23:39.36 | dzo | yes and the #defines. |
| 23:40.57 | mdrobnak | Ah. |
| 23:41.01 | mdrobnak | Ok what's line 351? |
| 23:41.08 | mdrobnak | (I'm not on latest git) |
| 23:44.20 | mdrobnak | Start RAM console early? |
| 23:46.33 | mdrobnak | Ok, looks like it's ready. Gonna try now. |
| 23:52.39 | mdrobnak | Booting. |
| 23:53.27 | mdrobnak | Wow. Ok, actually It gets through the animation twice. |
| 23:53.29 | mdrobnak | Then crashes. |
| 23:53.56 | mdrobnak | ok, soft reset. |
| 23:56.45 | mdrobnak | wishes he could use haret with MacOs |
| 23:59.22 | mdrobnak | Yay, I got something! |