00:02.28 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
00:06.38 | *** part/#htc-linux sakartha (n=chatzill@f053071175.adsl.alicedsl.de) |
00:11.11 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
00:27.53 | *** join/#htc-linux scope009 (i=scope009@c-98-248-192-186.hsd1.ca.comcast.net) |
00:31.24 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
00:32.33 | *** join/#htc-linux marajin (n=marajin@87-194-102-189.bethere.co.uk) |
01:12.40 | *** join/#htc-linux darkstar62 (n=darkstar@97-126-104-157.tukw.qwest.net) |
01:31.21 | tmzt | 21:20 < cr2> ebf5c2036d37bc56b4d41ddcbda4311e ./RAPH/dump/Fw1251r1c.bin |
01:31.21 | tmzt | 21:20 < cr2> ebf5c2036d37bc56b4d41ddcbda4311e ./DIAM/dump/Fw1251r1c.bin |
01:31.21 | tmzt | 21:21 < cr2> 7be50ef3cafa7f948b1065e3b2dc0e7c ./system/etc/wifi/Fw1251r1c.bin |
01:31.27 | tmzt | ali1234: this file |
01:32.36 | ali1234 | RAPH and DIAM are grabbed from WM? and the third from an android phone, right? |
01:34.19 | tmzt | yeah |
01:34.21 | tmzt | g1 I think |
01:34.43 | ali1234 | what size is it? |
01:35.01 | ali1234 | i dont seem to have it |
01:35.23 | ali1234 | 185388? |
01:36.02 | tmzt | ? |
01:36.22 | *** join/#htc-linux NetRipper (n=netrippe@82.95.194.99) |
01:36.36 | ali1234 | all i have is fw_dcr_1150_sta.bin |
01:36.49 | ali1234 | 120808 bytes |
01:37.14 | ali1234 | cr2, fw_dcr_1150_sta.bin. 14:34.02, cr2, it's the 54mbit ACX100. |
01:37.58 | tmzt | old |
01:38.00 | tmzt | md5? |
01:38.16 | ali1234 | 2f708700cb45f69fc411d2d84ae99d65 fw_dcr_1150_sta.bin |
01:39.17 | tmzt | we should try dumping/comparing sections for these |
01:39.31 | tmzt | but I guess wl1251 could be made to work |
01:50.07 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
03:22.41 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
03:27.14 | *** join/#htc-linux darkstar62 (n=darkstar@97-126-104-157.tukw.qwest.net) |
04:07.43 | *** join/#htc-linux Shinto (n=John@f049036061.adsl.alicedsl.de) |
04:07.48 | *** join/#htc-linux goxboxlive (n=jrs@mail2.hjellnesconsult.no) |
04:29.25 | *** join/#htc-linux droid0011 (n=mc@p4FDCF9C7.dip.t-dialin.net) |
05:05.42 | *** join/#htc-linux imfloflo (n=moi@83.25.71-86.rev.gaoland.net) |
05:34.11 | *** join/#htc-linux itchy8me (n=quassel@ip80-116-211-87.adsl2.static.versatel.nl) |
06:13.49 | *** join/#htc-linux toi (n=toi@d51A49C45.access.telenet.be) |
06:22.21 | *** join/#htc-linux rashire2 (n=ed1112wa@pool-98-114-205-156.phlapa.fios.verizon.net) |
06:27.48 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
06:31.20 | *** join/#htc-linux ArteK (n=Artur@81.15.241.96) |
06:44.16 | *** join/#htc-linux idkfa (n=sergey@217.12.97.115) |
07:05.51 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
07:55.08 | *** join/#htc-linux malyprinc (n=root@backup.claytonpower.sk) |
08:13.00 | *** join/#htc-linux nebi (n=nebi@c83-255-51-86.bredband.comhem.se) |
08:19.39 | *** join/#htc-linux FR^2 (n=frzwo@2001:41d0:1:ed2f:0:0:0:cafe) |
08:20.24 | FR^2 | hiho |
08:22.02 | *** join/#htc-linux dcordes (n=luke@unaffiliated/dcordes) |
08:23.52 | tmzt | 07:04 -!- FR^2 |
08:23.52 | tmzt | [n=frzwo@2001:41d0:1:ed2f:0:0:0:cafe] has joined #htc-linux |
08:23.52 | tmzt | 07:05 < FR^2> hiho |
08:24.00 | tmzt | hello |
08:25.18 | FR^2 | tmzt: Hmm? |
08:26.46 | tmzt | that was for dcordes |
08:26.52 | tmzt | for context |
08:29.40 | dcordes | hi tmzt, FR^2 |
08:29.48 | dcordes | I just got up and thought about the autobuilder |
08:30.03 | FR^2 | hi dcordes, hi tmzt ;) |
08:30.25 | tmzt | ah |
08:30.26 | tmzt | ok |
08:31.32 | dcordes | tmzt, you want to host the builder directly on the htc-linux or only put referrence? |
08:33.07 | tmzt | whereever we can get the need resources |
08:33.19 | tmzt | we need to clean up git a bit first |
08:33.20 | *** join/#htc-linux Daemon_ (n=DaemonES@195.238.92.163) |
08:33.40 | tmzt | all machines kernels don't currly build |
08:33.43 | tmzt | I think |
08:33.49 | tmzt | currently |
08:37.04 | dcordes | true |
08:37.09 | dcordes | like kovsky/raph |
08:37.53 | dcordes | we need to talk to the same guy who made the wiki script work well. he offered a kernel autobuilder |
08:39.36 | dcordes | it would be nice to have an armv6-novfp machine in the narcissus autobuilder |
08:56.32 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) [NETSPLIT VICTIM] |
08:56.32 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) [NETSPLIT VICTIM] |
08:56.32 | *** join/#htc-linux mrmoku|away (n=mrmoku@ppp-93-104-162-49.dynamic.mnet-online.de) [NETSPLIT VICTIM] |
08:56.32 | *** join/#htc-linux pigeon (n=pigeon@150.101.116.163) [NETSPLIT VICTIM] |
08:56.32 | *** join/#htc-linux furtardo (n=mks@203.83.248.32) [NETSPLIT VICTIM] |
08:56.33 | *** join/#htc-linux BeRo^fr (i=znc@84.19.167.129) |
08:56.41 | *** join/#htc-linux gouki (n=gouki@drwxr-xr-x.org) [NETSPLIT VICTIM] |
08:59.49 | *** join/#htc-linux dcordes_ (n=luke@unaffiliated/dcordes) |
09:48.22 | *** join/#htc-linux Softec_ (n=Softec@81-174-58-186.staticnet.ngi.it) |
09:57.02 | ellisway | hi all |
10:06.30 | *** join/#htc-linux phh (n=quassel@lns-bzn-50f-81-56-224-142.adsl.proxad.net) |
10:07.42 | *** join/#htc-linux Gnutoo (n=gnutoo@ABordeaux-152-1-65-235.w82-125.abo.wanadoo.fr) |
10:09.33 | Daemon_ | hi |
10:18.50 | tmzt | hello |
10:29.23 | *** join/#htc-linux Gnutoo (n=gnutoo@ABordeaux-152-1-65-235.w82-125.abo.wanadoo.fr) |
10:37.47 | *** join/#htc-linux AndP (n=Airpil@88.204.115.25) |
10:38.00 | AndP | Is it possible to get sound work without kernel rebuild ? |
10:48.19 | itchy8me | hi |
10:50.30 | itchy8me | any people here working on the kernel for the blackstone? |
10:50.41 | Gnutoo | hi,maybe you don't care but I just want to tell that I made sound working without the proprietary libhtc_acoustic on the android stack of the g1 |
10:51.15 | tmzt | nice |
10:51.26 | tmzt | as a test program? |
10:51.35 | tmzt | itchy8me: hello again |
10:51.43 | itchy8me | hi tmzt |
10:51.52 | tmzt | I can't remeber who, but someone is |
10:52.03 | tmzt | more than one actually |
10:52.39 | itchy8me | shweet.. will wait a couple and ask again later.. i know cr2 was..? |
10:53.59 | Gnutoo | no |
10:54.07 | Gnutoo | as normal sound |
10:54.26 | Gnutoo | that means that you can play wav,mp3 but also ogg etc... |
10:54.36 | Gnutoo | test program was already there |
10:54.42 | Gnutoo | it's called playwav2 |
10:54.43 | Gnutoo | .c |
10:58.12 | mickeyl | so ring tones would work, what about BP audio routing? |
11:01.34 | *** join/#htc-linux Gnutoo (n=gnutoo@ABordeaux-152-1-65-235.w82-125.abo.wanadoo.fr) |
11:03.49 | *** join/#htc-linux Gnutoo (n=gnutoo@ABordeaux-152-1-65-235.w82-125.abo.wanadoo.fr) |
11:08.29 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) |
11:12.53 | *** join/#htc-linux marex (n=marex@thor.hackndev.com) |
11:20.06 | Gnutoo | hi, what's the copyright of playwav2.c |
11:20.15 | Gnutoo | I based a work on it |
11:20.50 | dcordes_ | Gnutoo, it's based on playwav.c from google |
11:21.05 | Gnutoo | yes but the license state that: |
11:21.10 | Gnutoo | /* Copyright (C) 2008 The Android Open Source Project*/ |
11:21.12 | Gnutoo | that's all |
11:21.21 | Gnutoo | I want to be able to distribute my work |
11:21.46 | Gnutoo | linuxtogo.org/~lgorris/misc/playwav2.c |
11:21.51 | Gnutoo | is where I took it |
11:23.11 | Gnutoo | dcordes_, I made the sound work without libhtc_acoustic on android on the htc dream |
11:23.12 | dcordes_ | yes I put it there but cr2 made it. and he took it from the googel tree |
11:23.24 | Gnutoo | yes but I need a free version |
11:23.40 | dcordes_ | then you need to cleanroom it or whatever |
11:23.45 | dcordes_ | what that's called |
11:23.54 | dcordes_ | rewrite in lolcode |
11:23.56 | Gnutoo | so cr2 won't license it freely? |
11:24.36 | dcordes_ | maybe you wanna see the original first? |
11:25.01 | Gnutoo | ok |
11:25.13 | Gnutoo | i'll look but I already did the work |
11:30.04 | Gnutoo | the function I copied is from not in playwav1 |
11:31.24 | Gnutoo | dcordes_, where can I find cr2? |
11:31.46 | dcordes_ | cr2@htc-linux.org or here |
11:32.16 | Gnutoo | ok thanks a lot |
11:35.03 | dcordes_ | I don't know if the (c) says anything |
11:35.20 | dcordes_ | it's also present in the gpl kernel source files |
11:37.35 | *** join/#htc-linux Winya (n=somebody@catv3EC9552F.pool.t-online.hu) |
11:42.06 | Gnutoo | ok |
11:46.11 | *** part/#htc-linux Winya (n=somebody@catv3EC9552F.pool.t-online.hu) |
11:50.17 | *** join/#htc-linux itchy8me (n=quassel@ip80-116-211-87.adsl2.static.versatel.nl) |
11:53.40 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
11:54.26 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
12:08.04 | *** join/#htc-linux dcordes__ (n=luke@unaffiliated/dcordes) |
12:16.04 | *** join/#htc-linux dcordes-kais (n=dcordes-@ip-77-24-101-253.web.vodafone.de) |
12:16.47 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
12:17.00 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
12:23.43 | *** join/#htc-linux tuxhero (n=tuxhero@58.68.74.85) |
12:23.59 | tuxhero | tmzt |
12:24.12 | tuxhero | tmzt r u there? |
12:25.28 | *** part/#htc-linux tuxhero (n=tuxhero@58.68.74.85) |
12:50.14 | *** join/#htc-linux Strid (n=Strid@83.241.183.100) |
13:03.45 | *** join/#htc-linux |AndP| (n=Airpil@88.204.115.25) |
13:12.06 | *** join/#htc-linux AndP (n=Airpil@88.204.115.196) |
13:21.26 | *** join/#htc-linux FR^2 (n=frzwo@2001:41d0:1:ed2f:0:0:0:cafe) |
13:23.31 | *** join/#htc-linux Amaranth_ (n=travis@ubuntu/member/Amaranth) |
13:35.28 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
13:38.29 | *** join/#htc-linux darkstar62 (n=darkstar@m460536d0.tmodns.net) |
13:53.46 | *** join/#htc-linux Strid (n=Strid@gw.manodo.net) |
13:54.55 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
13:55.02 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
13:56.49 | *** join/#htc-linux Softec (n=Softec@81-174-58-186.staticnet.ngi.it) |
14:12.28 | *** join/#htc-linux slimspace_ (n=darkstar@97.126.104.157) |
14:13.52 | *** join/#htc-linux slimspace_ (n=darkstar@97-126-104-157.tukw.qwest.net) |
14:27.24 | *** join/#htc-linux |AndP| (n=Airpil@88.204.115.196) |
14:28.53 | *** join/#htc-linux phh (n=quassel@81.56.224.142) |
14:39.12 | *** join/#htc-linux imfloflo (n=moi@83.25.71-86.rev.gaoland.net) |
15:02.00 | *** join/#htc-linux Bally3 (n=Bally3@cpc1-blac6-0-0-cust618.manc.cable.ntl.com) |
15:06.40 | *** join/#htc-linux AndP-away (n=Airpil@91.211.187.130) |
15:25.42 | *** join/#htc-linux marex (n=marex@thor.hackndev.com) |
15:32.48 | *** join/#htc-linux tsdogs (n=tsdogs@tsdogs.metalit.net) |
15:33.03 | marajin | yo |
15:34.48 | *** join/#htc-linux idkfa (n=sergey@87.228.4.172) |
15:34.49 | *** join/#htc-linux AndP (n=Airpil@jovk.Tsk.Ru) |
15:36.47 | *** join/#htc-linux idkfa (n=sergey@87.228.4.172) |
16:05.30 | *** join/#htc-linux pH5 (n=ph5@e178194063.adsl.alicedsl.de) |
16:06.51 | *** join/#htc-linux Tinyboom (n=nahh@41.80-202-154.nextgentel.com) |
16:21.13 | *** join/#htc-linux toi (n=toi@d54C2AAB7.access.telenet.be) |
17:02.19 | *** join/#htc-linux imfloflo (n=moi@83.25.71-86.rev.gaoland.net) |
17:02.26 | *** join/#htc-linux AndP-away (n=Airpil@88.204.115.196) |
17:05.25 | *** join/#htc-linux Echo31 (n=olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
17:06.43 | Echo31 | hej PH5 |
17:07.44 | *** join/#htc-linux the_sys0p` (n=the_sys0@cpe-67-49-192-228.bak.res.rr.com) |
17:08.39 | *** join/#htc-linux stickboy (n=anonymou@128.153.178.113) |
17:10.10 | pH5 | hej Echo31 |
17:11.49 | Echo31 | pH5: Westerday, i sent the patch file bundle to cr2 |
17:18.37 | *** join/#htc-linux darkstar62 (n=darkstar@m360536d0.tmodns.net) |
17:20.02 | Echo31 | PH5: Have you received the file from CR2?. Otherwise, you would receive them now? |
17:20.07 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
17:21.15 | *** join/#htc-linux luc__ (n=luc@89.115.128.35) |
17:22.56 | pH5 | Echo31: I haven't received anything yet. |
17:23.47 | pH5 | You can send me what you want to have included in the dev branch. As this branch is rebased regularly, it's no problem to apply fixes to the patches later, if needed. |
17:26.21 | *** join/#htc-linux luc__ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
17:27.41 | Echo31 | pH5: I send on pH5@htc-linux.org |
17:29.01 | pH5 | Echo31: philipp.zabel@gmail.com |
17:29.53 | Echo31 | pH5: Ok. |
17:46.05 | *** join/#htc-linux luc__ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
17:47.21 | *** join/#htc-linux darkstar62[work] (n=darkstar@m460536d0.tmodns.net) |
17:57.37 | pH5 | Echo31: ok, got 'em. |
17:57.42 | pH5 | has a look |
18:00.32 | *** join/#htc-linux luc__ (n=luc@89.115.128.35) |
18:05.54 | *** join/#htc-linux Anon0264 (i=JavaUser@anon-94-147.ipredate.net) |
18:06.13 | *** join/#htc-linux dcordes (n=luke-g@unaffiliated/dcordes) |
18:06.51 | GreatLord | Hi |
18:07.10 | GreatLord | I will say u all doing great work for porting linux to htc |
18:07.24 | GreatLord | I have Xepria X1 |
18:08.34 | GreatLord | I just donate 1EU to Aiv |
18:08.37 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
18:08.59 | GreatLord | it is not much but I will donate more when |
18:09.03 | GreatLord | it is finish |
18:09.40 | GreatLord | when I can run andorid on it |
18:12.00 | *** join/#htc-linux SOG (n=SOG@n058152130237.netvigator.com) |
18:12.17 | *** join/#htc-linux MrPippy (n=pip@adsl-75-37-163-177.dsl.sndg02.sbcglobal.net) |
18:15.30 | tehbla | it'll proly never be available .. man.. 1 eur... Aiv will retire and never come back |
18:16.44 | GreatLord | tehbla I do not have much money |
18:17.08 | GreatLord | it was everything I hade on paypal |
18:17.19 | GreatLord | lest it is something |
18:29.50 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
18:31.11 | pH5 | Echo31: good, we're getting there. |
18:31.35 | pH5 | Echo31: please run checkpatch (scripts/checkpatch.pl in your kernel tree) over the athena core patch and fix the errors (and warnings, where possible) |
18:31.51 | dcordes | tehbla, it'll proly never be available? |
18:32.02 | dcordes | tehbla, are you sure you know what you're talking about? |
18:32.37 | tehbla | man, i was kidding |
18:33.01 | GreatLord | dcordes : great work with x1 |
18:33.02 | Echo31 | pH5: where can i find this script ? |
18:33.19 | GreatLord | and other that doing the x1 port |
18:33.26 | pH5 | Echo31: you can also send just a patch with incremental changes, if you prefer. |
18:33.51 | pH5 | Echo31: cd into your kernel tree, you can find it in the scripts/ directory |
18:34.25 | pH5 | Echo31: does the wireless driver work already? |
18:36.32 | Echo31 | PH5: not yet. |
18:38.00 | Echo31 | pH5: I must establish the correct initialisation of pxamci |
18:39.16 | pH5 | oh, ok. I'll leave it out for now. |
18:39.22 | Echo31 | pH5: But perhaps, the generic driver wl125x works. |
18:40.14 | Echo31 | pH5: When do you come back ? |
18:42.10 | pH5 | Echo31: I'm not leaving. I'm just going to leave out (omit) the wireless patch when adding your patches to the dev branch for now. |
18:43.48 | Echo31 | pH5: ok |
18:52.58 | Echo31 | pH5: I have a lot of warning |
18:54.20 | pH5 | Echo31: yeah, that's why I ask you to fix it ;) a few warnings I'd have fixed up myself. |
18:54.45 | ellisway | ph5 u get my pm ? |
18:55.44 | pH5 | ellisway: ah yes, thanks |
18:56.08 | ellisway | will do the forward now |
18:57.29 | Echo31 | pH5: I modify the files step by step |
18:59.13 | *** join/#htc-linux stickboy (n=anonymou@128.153.178.113) |
19:03.56 | pH5 | Echo31: good, don't worry about vsfb though. |
19:21.12 | *** join/#htc-linux marajin (n=marajin@87-194-102-189.bethere.co.uk) |
19:22.07 | dcordes | bye |
19:24.11 | Echo31 | PH5: How can i fixed the "WARNING: use relative pathname instead of absolute in changelog text" |
19:25.20 | *** join/#htc-linux luc__ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
19:25.48 | pH5 | Echo31: maybe it's because you use absolute paths when diff'ing. does this still appear when you, say, cd into $HOME and diff relative paths from there? |
19:31.50 | *** join/#htc-linux cr2 (n=cr2@ip-77-25-107-106.web.vodafone.de) |
19:31.51 | *** join/#htc-linux Shinto (n=John@f049036061.adsl.alicedsl.de) |
19:34.53 | *** join/#htc-linux phh_ (n=quassel@lns-bzn-50f-81-56-224-142.adsl.proxad.net) |
19:38.18 | cr2 | Echo31: i've just returned from work, and looking at your patch :) |
19:38.53 | Echo31 | cr2: Hi |
19:39.10 | cr2 | hi Echo31 |
19:39.37 | cr2 | pH5: did you already apply the patch of Echo31 ? then i may better checkout your repo. |
19:40.22 | pH5 | hi cr2, not yet. |
19:41.00 | pH5 | I asked Echo31 to fix the checkpatch errors first. |
19:41.35 | cr2 | RFKILL_TYPE_GPS ? does it really matter ? |
19:42.20 | cr2 | Echo31: your dpram patch is for BA or athena ? |
19:43.16 | Echo31 | cr2: The DPRAM pach comes from BA but modified for athena |
19:43.54 | cr2 | but it looks very BA-specific. i doubt that it works on athena |
19:44.06 | cr2 | PC Card for ATI ? |
19:44.46 | Echo31 | cd2: wiki said ATI |
19:44.58 | cr2 | I2C sound is just I2C. it does sound source multiplexing only. but there is gsensor et al. on I2C too |
19:45.11 | cr2 | Echo31: i'll check. |
19:45.48 | cr2 | STUART unknown is unused. it should have been IR probably |
19:46.12 | Echo31 | cr2: I2S is not use ? |
19:46.26 | cr2 | no |
19:46.55 | cr2 | pxa I2S is not used. the I2S source is the ATI DSP |
19:47.02 | pH5 | so which of those drivers do work at all? does dpram? does the gsensor? does the spi-keyboard one? |
19:47.38 | cr2 | pH5: spi-keyboard works, and was written by Kevin2 for hermes. originally |
19:48.26 | cr2 | Echo31: athena -specific gpios ? |
19:48.54 | cr2 | 51 and 52 ? i think these are just irqs, and don't need ALT mfp setup |
19:48.57 | Echo31 | cr2: pH5: the keyboard and touchscreen work ( angstrom) |
19:49.21 | pH5 | ok |
19:49.47 | cr2 | pH5: the "real" progress over hh.org is the spi keyboard driver. |
19:50.47 | Echo31 | cr2: ok it is irq but the wiki shows a Alt mode |
19:50.53 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
19:50.53 | cr2 | "real" in the new functionality sense. the porting to 2.6.30 is a great effort of Echo31, of course |
19:51.25 | cr2 | Echo31: irq can't be ALT. something is broken in the wiki. |
19:51.38 | Echo31 | cr2: Ok |
19:52.41 | cr2 | Echo31: why 0x3f for the cpld2 ? |
19:52.46 | cr2 | 00111111 |
19:53.08 | cr2 | GPIO 51 00080000 DPR-AT I FE 1 |
19:53.09 | Echo31 | cr2: For I2C enabling the I2C groups |
19:53.10 | cr2 | GPIO 52 00100000 DPR-P2 I FE 1 |
19:53.25 | cr2 | 1 is for the dumped level value, not alt. |
19:54.17 | cr2 | Echo31: do you check the board id ? |
19:54.43 | Echo31 | cr2: With 0x3f, the gsensor communicates correctly with i2c |
19:54.44 | cr2 | ok, wifi out and tvout are off |
19:54.58 | cr2 | and the bkl and lcd are on. that's ok so far |
19:55.13 | cr2 | wifiout=wifi power |
19:56.56 | cr2 | Echo31: why is it "normally 0x23" ? i think it's a bit misleading |
19:57.43 | cr2 | once we will have atiw video pll setup, the lcd power pins can be shut down too |
19:59.17 | Echo31 | cr2: do you some idea for atiw |
19:59.52 | Echo31 | cr2: do you have some idea |
20:00.11 | *** join/#htc-linux stickboy (n=anonymou@128.153.178.113) |
20:00.15 | *** join/#htc-linux Bally3 (n=Bally3@cpc1-blac6-0-0-cust618.manc.cable.ntl.com) |
20:01.12 | Echo31 | cr2: I don't find help from qualcomm |
20:01.27 | cr2 | Echo31: which help ? |
20:02.43 | Echo31 | cr2: the Qualcomm site for their developers |
20:03.24 | cr2 | there is nothing for atiw288x |
20:03.24 | cr2 | only the htc chip init disassembly from athena and hermes |
20:04.06 | cr2 | Bally3: i have a hermes too. if you'll start working on it that'll be nice, and the SD driver will be the same as for athena |
20:04.22 | cr2 | Bally3: afair i had the touchscreen working on hermes too. |
20:04.25 | Echo31 | cr2: from epson, I could dowload the source code of driver |
20:04.36 | cr2 | for V03 ? |
20:05.13 | cr2 | Echo31: the power gpio, registers and irq for epson are known. |
20:05.30 | Bally3 | let me set things up cr2 - me not a developer.. so its not programming skills I'm offerng..unfortunately! |
20:06.12 | Bally3 | I can manage the project and try and get other interested to develop though |
20:06.14 | Echo31 | cr2: the ATA Ide from V5 is the V3. |
20:06.19 | cr2 | Bally3: the 2.6.25 kernel branch at linuxtogo.org should work. you'd only try to update it to 2.6.30 |
20:06.30 | Bally3 | aah ok.. |
20:06.35 | Bally3 | let me do some readiong.. |
20:06.37 | cr2 | Echo31: ok |
20:06.38 | Echo31 | cr2: V05 has a usb host |
20:06.50 | cr2 | Echo31: V03 too, but it's not used |
20:07.17 | cr2 | Echo31: the usb2.0 on athena uses philips aka nxp isp1582 |
20:07.25 | Echo31 | cr2: no, v03 has usb client and ide |
20:07.42 | cr2 | i have added the ancient code for it to hh.org |
20:07.55 | cr2 | Echo31: ok. but it's not used anyway :) |
20:08.07 | Echo31 | cr2: for V03 of athena, the usb device is not used |
20:08.13 | cr2 | yes |
20:09.04 | Echo31 | cr2: However, the driver V05 is for the old kernel |
20:09.10 | cr2 | Echo31: if you'll make epson run, then we can forget about SD. bad for hermes though |
20:09.34 | Echo31 | cr2, I think too |
20:13.47 | Echo31 | cr2: our athena kernel + wifi+atiw+bt+gps+wifi+epson = first objectives fulfilled |
20:14.35 | cr2 | yes. wifi should be easy, once we will be able to load the firmware. |
20:15.06 | ellisway | will that be for the athena 400 aswell ? |
20:16.02 | cr2 | it's the IDE interface |
20:16.26 | cr2 | so i guess yes. unless it has a different LCD and some different memory mapping |
20:16.50 | cr2 | ellisway: do you have an spl for athena400 ? and the kernel dmesg too |
20:17.22 | *** join/#htc-linux nebi (n=nebi@c83-255-51-86.bredband.comhem.se) |
20:18.20 | ellisway | we done the dmesg before i think its still on the htc-linux.org website |
20:18.34 | ellisway | spl i havnt touched |
20:19.39 | cr2 | pd 0x0 0x1000 for the ipl |
20:19.40 | ellisway | htc-linux.org/dmesg16G and /dmesg16G2 |
20:19.51 | cr2 | ok |
20:19.56 | ellisway | are the dmesg files we created before |
20:20.06 | cr2 | pwf ipl400 0x0 0x1000 |
20:20.09 | cr2 | is better |
20:20.35 | cr2 | http://htc-linux.org/dmesg16G |
20:21.46 | cr2 | 21:50:25 +LcmOff_Samsong |
20:21.48 | cr2 | 21:50:25 -LcmOff_Samsong |
20:21.48 | ellisway | i have the device sitting next to me if you want me to run any thing on it |
20:21.50 | cr2 | looks good |
20:22.09 | cr2 | ellisway: dump the ipl and spl |
20:22.27 | cr2 | pwf spl400 0xa0000000 0x100000 |
20:22.37 | ellisway | it will be the original ipl/spl supplied on the device |
20:22.37 | cr2 | pwf ipl400 0x0 0x1000 |
20:22.55 | cr2 | it'll the the code you are actually running on the device |
20:23.42 | Bally3 | cr2: I've just been told 2.6.30 isnt out yet? |
20:23.52 | Bally3 | donut is 2.6.29? |
20:24.03 | ellisway | do you want me to do that using a specific ver of haret |
20:24.23 | cr2 | ellisway: the haret version is mostly irrelevant |
20:24.39 | ellisway | The latest stable version of the Linux kernel is: 2.6.30.5 2009-08-16 21:22 UTC F V VI C Changelog |
20:24.44 | cr2 | Bally3: check what is the best s3c244x kernel version |
20:25.01 | Bally3 | ok |
20:25.06 | cr2 | ellisway: not necessarily for the arm |
20:25.22 | ellisway | $true |
20:26.03 | cr2 | i'm also wondering if the s3c2442 kernel will boot on s3c2443. i have a PNA with s3c2443 but could not boot a modified hermes kernel on it ;) |
20:27.33 | cr2 | hmm. where is dcordes when one needs him. |
20:28.41 | cr2 | Echo31: where did you get the .x_plate_ohms entries ?? |
20:30.00 | *** join/#htc-linux phh (n=quassel@lns-bzn-50f-81-56-224-142.adsl.proxad.net) |
20:30.37 | Echo31 | cr2: the ad7877 can be worked following two electronic schemas |
20:30.51 | cr2 | ok |
20:31.05 | cr2 | Echo31: you have added only 1 power gpio for GPS. |
20:31.21 | cr2 | Echo31: i think that the second gpio needs to be =0 too |
20:32.14 | Bally3 | booting |
20:32.40 | Echo31 | cr2: the ad7877 .x_plate_ohms value comes from backfin board |
20:33.00 | cr2 | .power_budget=0 ? |
20:33.36 | cr2 | afair it should be 500, otherwise the USB stick will not work |
20:35.06 | cr2 | athena_mci_init -> HTC_ATHENA_SD ?? |
20:35.06 | cr2 | and SD_POWER |
20:35.06 | cr2 | it's wrong. |
20:35.06 | cr2 | the SD is on ATIW |
20:35.06 | *** join/#htc-linux phh (n=quassel@lns-bzn-50f-81-56-224-142.adsl.proxad.net) [NETSPLIT VICTIM] |
20:35.06 | *** join/#htc-linux stickboy (n=anonymou@128.153.178.113) [NETSPLIT VICTIM] |
20:35.06 | *** join/#htc-linux lefty4dead (n=rickw@ip72-213-145-19.ok.ok.cox.net) [NETSPLIT VICTIM] |
20:35.06 | *** join/#htc-linux LTxda (n=anon@unaffiliated/ltxda) [NETSPLIT VICTIM] |
20:35.06 | *** join/#htc-linux ptitjes (n=didier@AVelizy-154-1-22-23.w82-124.abo.wanadoo.fr) |
20:35.06 | *** join/#htc-linux thinko (n=jdoe6alp@smaug.rackdragon.com) [NETSPLIT VICTIM] |
20:35.18 | cr2 | and mci is used for wifi. you need to change the SD power/irq to wifi power gpios/ irq |
20:35.38 | Echo31 | cr2: Ok, i saw the value 500, but i did known why |
20:36.17 | cr2 | Echo31: it's the current that may be provided by host. |
20:36.33 | cr2 | a sane host must provide 500mA |
20:36.36 | Echo31 | cr2: ok |
20:36.48 | cr2 | otherwise it's against the spec |
20:37.05 | cr2 | but zaurus does it ;-) |
20:37.57 | cr2 | Echo31: and fix the mci gpios for wifi. this part is obviously wrong. |
20:38.11 | Echo31 | cr2: What value is better ? 400 or 500 |
20:38.23 | cr2 | 500 works for me |
20:38.55 | Echo31 | cr2: ok |
20:39.19 | cr2 | "I2S sound I2C" looks weird |
20:42.38 | cr2 | Echo31: check this table for all i2C ids: http://wiki.xda-developers.com/index.php?pagename=HTC_I2C_IDs |
20:42.48 | cr2 | Echo31: for athena |
20:43.09 | Echo31 | cr2: I saw and there are some ? |
20:43.12 | cr2 | <PROTECTED> |
20:43.42 | cr2 | the TV encoder is not on the pxa I2C |
20:44.13 | Echo31 | cr2: how many I2C channel on athena ? |
20:44.19 | cr2 | it's controlled by an i2c gpio bitbang driver. i need to recheck it's id. afair it's not 0x75 |
20:44.40 | cr2 | pxa i2c, pxa power_i2c and bitbang |
20:44.44 | cr2 | 3 |
20:46.04 | Echo31 | cr2: the athena don't use directly the ak4641 ? |
20:46.49 | cr2 | hm. sorry. it's an error in the wiki |
20:47.01 | cr2 | it uses ak4641 for audio source switching |
20:47.24 | cr2 | thats why i think that we will make the phone work (with external headset) |
20:47.31 | Echo31 | cr2: as hx4700 |
20:47.35 | cr2 | but playing music may be a big problem |
20:47.44 | cr2 | Echo31: and universal |
20:48.04 | cr2 | Echo31: but they both use pxa i2s as sound source, not the ATI DSP |
20:49.24 | cr2 | Echo31: from athe400 dmesg: |
20:49.27 | cr2 | pCPLD_M_Regs->GroupA=0xc |
20:49.29 | cr2 | pCPLD_M_Regs->GroupB=0xa |
20:49.30 | cr2 | pCPLD_M_Regs->GroupC=0x0 |
20:49.32 | cr2 | pCPLD_M_Regs->GroupD=0x50 |
20:49.33 | cr2 | pCPLD_S_Regs->GroupA=0x4102 |
20:50.16 | cr2 | hehe. buggy wince |
20:50.19 | cr2 | !!!!!!!!!!!!!!!!There is no clear CPLD intr 20 |
20:51.08 | cr2 | Initial Values: cccr: 02000210 cken: 01dcde68 oscc: 00000003 ccsr: 30000210 |
20:51.10 | cr2 | Final Values: cccr: 02000210 cken: 01dcde68 oscc: 00000003 ccsr: 30000210 |
20:51.40 | cr2 | +ResetMicroP |
20:51.51 | cr2 | wtf is microp on athena ? |
20:56.18 | *** join/#htc-linux darkstar62[work] (n=darkstar@m460536d0.tmodns.net) |
20:57.03 | Echo31 | cr2: What are the GPIO and IRQ for the pxamci ( wifi) ? |
20:57.20 | cr2 | you need to set the ALT for mci |
20:57.57 | cr2 | and the 4 CPLD wifi power gpios, wifi irq gpio |
20:58.13 | *** join/#htc-linux Strid (n=Strid@c-94d0e255.2412-9-64736c12.cust.bredbandsbolaget.se) |
20:59.03 | cr2 | GPIO 54 00400000 wifi related O |
20:59.08 | cr2 | don't know what's that |
20:59.16 | cr2 | GPIO 60 10000000 wifi related O |
20:59.27 | cr2 | GPIO 72 00000100 wifi reset O |
20:59.38 | ellisway | cr2 u need anything else from the athena 400 |
20:59.42 | cr2 | GPIO 35 00000008 wifi irq I FE |
21:00.06 | cr2 | is probably for the tiwlan driver only |
21:00.22 | cr2 | ellisway: can you dump the wince nk.exe ? |
21:00.44 | ellisway | pm me the cmds and i`ll do it now getting ready to go out |
21:00.52 | ellisway | but i can do the nk first |
21:01.53 | cr2 | ok |
21:08.05 | cr2 | Echo31: the rest looks ok |
21:08.38 | cr2 | Echo31: so i think that the dpram needs a brand new driver, and you'd fix the wifi gpios. |
21:08.52 | cr2 | pH5: drop the dpram driver too |
21:14.56 | Echo31 | cr2: where can you find a new driver for dpram? |
21:17.26 | *** part/#htc-linux ArteK (n=Artur@81.15.241.96) |
21:18.31 | cr2 | Echo31: we need to write one. something like smd.c for msm |
21:18.55 | cr2 | Echo31: but with real hw interrupts |
21:20.20 | Echo31 | cr2: I must gather the smd.c to athena |
21:20.59 | Echo31 | <PROTECTED> |
21:21.18 | cr2 | 1 channel, and some strange control registers |
21:22.08 | Echo31 | The smd does work with 3 channels ? |
21:23.36 | cr2 | 4 channels on raph |
21:23.49 | cr2 | but the amount of channels does not matter |
21:24.17 | cr2 | for this driver. it just pickes them from a config descriptor in the sram |
21:24.39 | cr2 | Echo31: is there a hw rtc on athe ? |
21:25.01 | cr2 | IsExtRTCColdBoot+ |
21:25.02 | cr2 | Year is smaller than 2000 |
21:25.04 | cr2 | RTC: I2C_Init fail~~~~~ |
21:25.05 | cr2 | Read 0x00 register timeout~~~ |
21:25.07 | cr2 | Wrong RTC time!!! (%d-%d-%d-%d-%d-%d-%d) |
21:25.08 | cr2 | RTC read register Error!!!!!!!!!(%d-%d-%d-%d-%d-%d-%d) |
21:25.10 | cr2 | Set to default time: %d-%d-%d-%d-%d-%d |
21:25.15 | Echo31 | cr2: I don't know |
21:28.20 | Echo31 | c2: You think that the hw RTC is missing on athena ? |
21:29.05 | cr2 | CmmPLL_REF_FB_DIV, 2 =%ld |
21:29.11 | cr2 | Echo31: it may be there. |
21:29.39 | cr2 | the same i2c chip as on htc sable |
21:30.35 | Echo31 | cr2: RTC8564 ? |
21:31.17 | *** join/#htc-linux stickboy (n=anonymou@128.153.178.113) |
21:31.43 | Echo31 | cr2: with 0x51 address |
21:31.54 | cr2 | not 100% sure |
21:31.59 | cr2 | <PROTECTED> |
21:32.01 | cr2 | <PROTECTED> |
21:32.02 | cr2 | <PROTECTED> |
21:32.04 | cr2 | <PROTECTED> |
21:32.05 | cr2 | <PROTECTED> |
21:32.07 | cr2 | <PROTECTED> |
21:32.08 | cr2 | <PROTECTED> |
21:32.10 | cr2 | <PROTECTED> |
21:32.11 | cr2 | <PROTECTED> |
21:32.13 | cr2 | <PROTECTED> |
21:32.14 | cr2 | <PROTECTED> |
21:32.24 | cr2 | we may need to split ATI init into there functions, and do them one by one |
21:32.40 | cr2 | i've already done 80% of the code |
21:33.08 | Echo31 | cr2: cool :) |
21:33.13 | cr2 | ClkPwrmgtInit will be the most tough one |
21:34.00 | cr2 | the cams are on ATI i2C port |
21:34.10 | cr2 | at least the big cam |
21:34.32 | cr2 | which is unknown too |
21:40.45 | *** join/#htc-linux xperia (n=chatzill@77-56-93-142.dclient.hispeed.ch) |
21:41.31 | xperia | hello to all ! cr2 just short did you already read the mail that i have send you ? |
21:42.00 | cr2 | xperia: date ? |
21:42.05 | xperia | today |
21:43.59 | cr2 | cc,41,3c,x -> LED TBL (hardcoded) ; wr mul |
21:44.08 | cr2 | this table is hardcoded into the .dll |
21:44.38 | xperia | the values from the i2c arent this the table ? |
21:45.01 | cr2 | they are in the table |
21:45.19 | cr2 | do you have the microp.dll ? |
21:45.37 | xperia | is it in the windows dir ? |
21:45.45 | cr2 | yes |
21:46.07 | xperia | one second ? |
21:47.40 | xperia | cant find a file in windows dir wit a name similar to microp.... |
21:50.55 | xperia | have to search it. i think it could be that is outside of the rom. however how can such atbale be imlemented in linux. exist some code for such a hardcoded led table allready ? |
21:53.09 | Echo31 | cr2: good night .See you soon , perhaps tomorrow . |
21:55.48 | xperia | cr2: it would be good having some example for such a hardcoded led table in linux for the microp-klt driver. |
21:56.26 | xperia | could other htc phones maybe have something similar |
21:57.13 | *** join/#htc-linux leaigor (n=laigor@188.134.36.14) |
21:59.31 | xperia | have to go. will report back if i know something more. p.s where is tmzt all the time. didnt see him any more a lot. bye |
22:04.56 | *** join/#htc-linux kiozen (n=kiozen@rgnb-5d87c403.pool.mediaWays.net) |
22:17.17 | *** join/#htc-linux lutzik (n=none@70-4-104-210.pools.spcsdns.net) |
22:35.15 | *** join/#htc-linux BHSPitMonkey (n=stephen@unaffiliated/bhspitmonkey) |
22:39.18 | Bally3 | cr2: ? |
22:39.38 | *** join/#htc-linux Newbie16 (n=ace@79-67-185-129.dynamic.dsl.as9105.com) |
22:39.38 | Newbie16 | hi |
22:39.41 | tmzt | hello |
22:39.52 | Newbie16 | can anyone help me with a bit of code to grab some data for the wifi, at the moment its getting errors |
22:40.33 | Newbie16 | basicly i'm trying to write some code to read some data before and after using mmc_io_rw_extended and memcpy |
22:40.36 | Newbie16 | but the read times out |
22:40.42 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
22:41.08 | Newbie16 | so can anyone help? |
22:41.48 | Newbie16 | getting: mmc0: Data timeout |
22:42.29 | Newbie16 | pio mode fails, and dma seems to work so i'm trying to switch from pio to dma for everything wifi related |
22:43.42 | Bally3 | tmzt: are you able to help please? |
22:44.17 | *** join/#htc-linux darkstar62_ (n=darkstar@m460536d0.tmodns.net) |
22:51.48 | *** join/#htc-linux marajin_ (n=marajin@87-194-102-189.bethere.co.uk) |
23:14.35 | *** join/#htc-linux phh (n=quassel@lns-bzn-50f-81-56-224-142.adsl.proxad.net) |
23:21.03 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
23:29.51 | *** join/#htc-linux ellisway (n=ellis@94.30.45.128) |
23:40.12 | *** join/#htc-linux surge (i=surge@pool-98-118-154-21.bflony.fios.verizon.net) |
23:48.41 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |