00:07.31 | *** join/#htc-linux gh0ul (n=asds@host81-154-247-76.range81-154.btcentralplus.com) |
00:18.28 | *** join/#htc-linux MethoS- (n=clemens@host-091-097-243-099.ewe-ip-backbone.de) |
01:06.25 | tmzt | maejrep: ping |
01:33.15 | *** part/#htc-linux JazzY (n=e@cust-02-52869a9a.adsl.scarlet.nl) |
01:42.21 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
01:54.21 | tmzt | dcordes_: if you're here, what is a good small initramfs for armv5? |
01:59.34 | *** join/#htc-linux Zinbolic (n=Zy@84.238.80.215) |
02:08.20 | *** join/#htc-linux tmzt (n=tmzt@76.211.12.137) [NETSPLIT VICTIM] |
02:13.10 | dcordes_ | tmzt: armv5te is good? |
02:17.10 | miknix | hello all |
02:17.55 | dcordes_ | hi miknix |
02:23.18 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
02:25.19 | tmzt | dcordes_: yeah |
02:26.52 | *** join/#htc-linux RZK333 (n=rzk@daemonet.ru) |
02:32.15 | miknix | dcordes, how is pda hacking going? |
02:44.07 | *** join/#htc-linux Camvoya (n=david@93.Red-79-146-164.staticIP.rima-tde.net) |
03:07.22 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
03:16.39 | *** join/#htc-linux Moku (n=John@g228198020.adsl.alicedsl.de) |
03:21.10 | tmzt | maejrep: hello, are you here? |
03:33.35 | *** join/#htc-linux orkkaze_w (n=kaze@ABordeaux-152-1-86-57.w86-196.abo.wanadoo.fr) |
03:43.39 | *** join/#htc-linux elmo40 (n=Leo@CPE0017ee09ce6d-CM00195ee6631c.cpe.net.cable.rogers.com) |
03:46.18 | elmo40 | not much in the way of hacking the Titan/Mogul, eh? |
03:47.39 | tmzt | elmo40: actually titan is pretty well supported |
03:47.42 | tmzt | in the vogue tree |
03:50.34 | elmo40 | i see much in the way of custom windoze ROMs. handhelds.org had one page that returned from a google search, the memory dump. |
03:50.39 | elmo40 | but the vogue is similar? |
03:51.00 | tmzt | yeah, other than keyboard the are pretty much the same |
03:55.48 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
03:56.47 | *** join/#htc-linux evocallaghan (n=edward@blastwave/maintainers/evocallaghan) |
03:56.52 | evocallaghan | Hi |
03:57.25 | tmzt | hello |
03:58.41 | evocallaghan | Glad I found this lovely place. I had a little google around for info on a linux port to HTC Touch Pro that I saw in the shops, atlass I could not find the required information. Any ideas ? |
03:59.14 | tmzt | gsm or cdma? |
03:59.35 | tmzt | most information is on the Diamond forum on forum.xda-developers.com |
03:59.50 | tmzt | PROJ HTC Diamond Linux or something like that |
03:59.54 | evocallaghan | Yeap, I looked there long and hard |
04:00.00 | evocallaghan | "Qualcomm® MSM7201A⢠528 MHz" |
04:00.07 | tmzt | so gsm |
04:00.17 | evocallaghan | http://www.htc.com/www/product/touchpro/specification.html I think this is the one |
04:01.53 | tmzt | ok, there is one kernel with working sd that should support android 1.0 |
04:02.37 | elmo40 | tmzt: has android been ported to the Vogue/Titan? |
04:02.39 | evocallaghan | Ah yes |
04:03.07 | evocallaghan | Now I been reading the Android Docs now, they seem to be much better then last year |
04:03.08 | tmzt | elmo40: the sd dma problem makes it difficult to use 1.0 yet, but 0.8 from dzo should work |
04:03.15 | *** join/#htc-linux exco (n=exco@e181066184.adsl.alicedsl.de) |
04:03.33 | evocallaghan | I know they took the Linux kernel and stripped it down. However, how diff is it ? |
04:03.59 | elmo40 | still 'android over winCE' ? i guess there is no way to flash the ROM chip, eh? ;) |
04:04.00 | tmzt | the actually added to it (kernel at least), binder ipc ashmem etc. |
04:04.34 | tmzt | elmo40: linux does not run on win ce, when linux boots win ce is replaced entirely in ram |
04:04.35 | elmo40 | kinda like Jlime on the HP Jornada. |
04:04.52 | tmzt | same a jornada |
04:05.07 | elmo40 | i see... this is why there is a performance hit. |
04:05.13 | tmzt | what? |
04:05.21 | elmo40 | never mind, had to think that through :P |
04:05.41 | tmzt | if you mean because ram is used for initramfs you are right, but the sd card support should fix that |
04:05.53 | elmo40 | no sd support yet? |
04:05.58 | tmzt | it is no different than running from flash except the flash can't be used |
04:06.06 | elmo40 | ok. |
04:06.07 | tmzt | there is support but it is not stable |
04:06.45 | elmo40 | i picked up a used Titan for a few bucks. No worries if i brick it ;) |
04:06.59 | evocallaghan | tmzt:Sorry, do you have any URL's at hands for "HTC Touch Pro" in particular ? |
04:07.01 | tmzt | where? |
04:07.18 | tmzt | evocallaghan: no, I keep having to look it up/ask |
04:07.30 | tmzt | evocallaghan: other than RaphaelLinux on wiki.xda-developers.com |
04:07.45 | elmo40 | from eBay.ca $85. Boots up and everything. just updated to 6.1 |
04:07.46 | evocallaghan | Well, I'm quite new to this area |
04:07.49 | tmzt | under Progress there is a link to the lavender-t kernel |
04:07.50 | elmo40 | wifi works like a charm. |
04:07.53 | tmzt | wow |
04:08.04 | tmzt | and it was a us titan? |
04:08.05 | evocallaghan | Last time I was around these parts porting things was back in the days of Plam |
04:08.09 | evocallaghan | s/Palm |
04:08.11 | evocallaghan | even |
04:08.19 | elmo40 | us titan? No. Canadian. Telus P4000. |
04:08.26 | elmo40 | used, yes ;) |
04:08.26 | tmzt | oh, ok |
04:08.44 | tmzt | you said Mogul so I assumed sprint |
04:08.47 | evocallaghan | Is RaphaelLinux some kind of distro then ? |
04:08.57 | evocallaghan | One would hope the patches are upstream |
04:08.58 | tmzt | Raphael is the HTC Touch Pro |
04:09.03 | tmzt | raph100 |
04:09.05 | tmzt | not yet |
04:09.13 | evocallaghan | I was just going to grab the lastest kernel and use that? |
04:09.16 | evocallaghan | Oh ! |
04:09.29 | evocallaghan | is confused by all these models :p |
04:10.02 | tmzt | that's what the code names are for |
04:10.15 | tmzt | the front page of wiki.xda lists most of them |
04:10.38 | elmo40 | this is my test bed. I plugged it into my PC (Elive) and it pops up at eth1. Just dont know what to do with it from there. Cant ssh into it since it still runs windoze. I was trying to get the bluetooth working, but i cant seem to initiate contact on the PC side. Works with winXP, mind you. |
04:10.42 | evocallaghan | http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael Thanks! |
04:10.54 | evocallaghan | I'm back on track now |
04:11.01 | evocallaghan | Just got a little confused |
04:11.02 | tmzt | elmo40: usb is not supported in linux for titan/vogue |
04:11.25 | tmzt | http://wiki.xda-developers.com/index.php?pagename=RaphaelLinux |
04:11.27 | tmzt | also |
04:11.42 | tmzt | elmo40: what are you trying to do? |
04:13.12 | evocallaghan | ta |
04:31.30 | elmo40 | tmzt: i guess i am aiming at a linux install, similar to jlime for the jornada. |
04:31.37 | elmo40 | boot from SD card would be nice. |
04:33.29 | elmo40 | tmzt: i will frequent this channel. for now i must retire... been counting sheep for 10min now ;) |
04:33.32 | elmo40 | ZZzzz |
04:51.03 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
04:57.39 | *** join/#htc-linux ionstorm (n=ion@ip68-110-123-12.ph.ph.cox.net) |
05:07.36 | *** join/#htc-linux tekkdrone (i=tekkdron@72.183.115.231) |
05:13.27 | *** join/#htc-linux lpotter_ (n=lpotter@58.173.176.153) |
05:15.51 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
05:17.32 | *** join/#htc-linux lpotter__ (n=lpotter@58.173.176.153) |
05:46.58 | *** join/#htc-linux dariball__ (n=dariball@p4FDC5258.dip.t-dialin.net) |
05:48.20 | dariball | it looks like my touchscreen calibration is broken ( android 1.0 htc touch diamond ) - is there some line to delete somewhere to force recalibration? |
05:49.25 | *** join/#htc-linux dariball (n=dariball@p4FDC5258.dip.t-dialin.net) |
05:59.14 | *** join/#htc-linux wyze (n=coooter@unaffiliated/swc666/x-4934821) |
06:10.27 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-75-85-249-111.bak.res.rr.com) |
06:22.34 | maejrep | hmm... so I should be trying sdc2? :| |
06:22.49 | maejrep | that doesn't make sense, unless the memory addresses and gpios are wrong |
06:22.56 | maejrep | (on the wiki) |
06:23.50 | maejrep | because i was definitely getting gpios and traces on the "sd2 (wifi)" gpios as listed on the wiki |
06:24.01 | maejrep | when I had wifi enabled and connected to haret over it |
06:34.28 | maejrep | tmzt, pong |
06:36.23 | AstainHellbring | hi maejrep whats up? |
06:36.32 | maejrep | just got home |
06:36.52 | maejrep | sounds like i might be barking up the wrong tree (happens a lot lately) |
06:37.30 | maejrep | were you able to get sd working on either of your raph devices? |
06:38.07 | AstainHellbring | yes raph100 I can fully boot android on it |
06:38.21 | maejrep | but not 800? |
06:38.32 | AstainHellbring | nope didnt play with it too much though |
06:39.46 | maejrep | i wonder if the sd/nand/wifi are just at different sd slots between 100 and 800 |
06:39.54 | maejrep | that would be odd, but wouldn't surprise me tbh |
06:40.41 | AstainHellbring | very possible |
06:41.17 | maejrep | so did you modify lavender's patch at all to get it up on 100? |
06:41.32 | AstainHellbring | hmm lemme find what I used on 100 |
06:42.07 | AstainHellbring | http://forum.xda-developers.com/showpost.php?p=3105104&postcount=1232 |
06:42.20 | maejrep | msmsdcc_id= from default.txt, and the sd clock data from clock-7x00.c would be helpful |
06:42.37 | maejrep | did you compile your kernel? |
06:43.46 | AstainHellbring | no used the precompiled one |
06:43.53 | maejrep | hmm |
06:44.29 | AstainHellbring | lavanders kernel and that initrd I liked |
06:44.44 | maejrep | and default.txt uses msmsdcc_id=2 ? |
06:44.49 | AstainHellbring | yes |
06:44.53 | maejrep | I think I remember lavender saying that |
06:46.01 | *** join/#htc-linux ddfire (n=ddfire@weston-69.65.87.158.myacc.net) |
06:46.20 | ddfire | wow i never expected so many poeple |
06:46.27 | ddfire | hi everyone |
06:46.31 | AstainHellbring | hi |
06:47.06 | maejrep | hi |
06:47.10 | ddfire | i just booted (five times) linux and android in my htc tilt |
06:48.18 | ddfire | but android keep freezing when i enter in an app |
06:48.36 | ddfire | i think when i start an app wich need internet or something |
06:48.43 | ddfire | now it is freez in maps |
06:49.10 | maejrep | hmm, with msmsdcc_id=2, I'm back to the timeouts |
06:49.28 | ddfire | maejrep: that was for me? |
06:49.35 | maejrep | no |
06:49.41 | ddfire | ok |
06:49.46 | ddfire | what can i do? |
06:49.47 | maejrep | well, was more just stating it |
06:49.49 | maejrep | :p |
06:50.03 | maejrep | i'm working on sd for raph800 |
06:50.36 | ddfire | i really want to have my phone running linux but it keep freezing |
06:50.40 | ddfire | any one? |
06:52.30 | tmzt | ddfire: are you using a sd card? |
06:52.41 | tmzt | ddfire: this is a kaiser-like device right |
06:53.34 | maejrep | i don't think sdc2 is right :/ |
06:53.43 | maejrep | when in haret, i only see sdc1 clock enabled |
06:54.51 | ddfire | tmzt: yes is the htc tilt |
06:54.53 | maejrep | actually, just looked at my notes, and I think I'm wrong.. actually looks like sdc3 |
06:55.04 | ddfire | tmzt: yes i am using an sd card |
06:55.10 | maejrep | HaRET(8)# pdump 0xa8600000 0x1 |
06:55.10 | maejrep | a8600000 | 2e1bfeaf | .... |
06:55.10 | maejrep | 00101110 00011011 11111110 10101111 |
06:55.10 | maejrep | <PROTECTED> |
06:55.15 | ddfire | i should copy the files to main memory? |
06:55.48 | maejrep | HaRET(5)# pdump 0xa8600000 0x1 |
06:55.48 | maejrep | a8600000 | 261bfeaf | ...& |
06:55.48 | maejrep | 00100110 00011011 11111110 10101111 |
06:55.52 | tmzt | 1.0 won't fit in ram and nand (flash) is not supported |
06:56.02 | maejrep | first one is with card inserted, 2nd one is with it ejected |
06:56.03 | tmzt | the sd has dma issues that cause android to be unstable |
06:57.13 | ddfire | tmzt: so? |
06:57.14 | tmzt | maejrep: did you find those enable bits from last night? |
06:57.35 | maejrep | hrm? |
06:58.05 | tmzt | clk enables |
06:58.06 | tmzt | last thing you mentioned |
06:58.45 | tmzt | ddfire: 1.0 won't fit in ram and nand (flash) is not supported |
06:58.49 | maejrep | oh, pclk? |
06:58.51 | tmzt | ddfire: the sd has dma issues that cause android to be unstable |
06:59.03 | maejrep | I don't think we know which one it is |
06:59.19 | tmzt | ddfire: there is an attempt to make 1.0 boot from ram though, but I don't know where those initrd's are |
06:59.31 | AstainHellbring | good luck maejrep I headed for bed now night |
06:59.37 | ddfire | tmzt: so i need to wait? |
06:59.58 | maejrep | but I know that when I remove/insert my sd card, the only bit that changes in 0xa8600000 is 0x8000000 |
07:00.00 | ddfire | and all the snapshot how the take it? |
07:00.02 | tmzt | yeah, though some people are not having these issues and dcordes_ thinks it might be the AMSS (radio) |
07:00.26 | tmzt | maejrep: what does that mean |
07:01.00 | tmzt | maejrep: is it possible it disables the clock but leaves it configured? |
07:01.05 | maejrep | it means if pclk is being enabled and disabled via the same CLK_CTL register (i would assume it should be), then it isn't changing by inserting/ejecting the sd card |
07:01.30 | tmzt | can you write to those registers from haret? |
07:01.33 | maejrep | there are several other bits that are also on, and we don't have them mapped out |
07:01.39 | maejrep | can we? |
07:01.51 | maejrep | I didn't know haret could do that :p |
07:02.20 | maejrep | i'm gonna try one more thing, with sdcc_id=3 just to satisfy my curiosity |
07:02.30 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
07:02.31 | tmzt | try help |
07:03.08 | maejrep | since it's clear to me now, that sdc1 and sdc3 are the only two that are used from what i can tell |
07:03.44 | maejrep | the sdc2 timeouts might be because there's no "card" in the slot, or just wrong pdata.. the EILSEQ error on sdc1 could be because it was trying to read a card that's actually the wifi (SDIO as you pointed out) |
07:04.33 | tmzt | I don't think the wifi is initing right without fw and eeprom |
07:06.54 | tmzt | sdcc_id? |
07:07.03 | tmzt | did you get the paste from earlier? |
07:07.05 | maejrep | [ 4.890183] mmc0: Qualcomm MSM SDCC at 0x00000000e1002000 irq 48,102 dma 8 |
07:07.06 | maejrep | [ 4.900030] mmc0: 4 bit data mode enabled |
07:07.06 | maejrep | [ 4.905981] mmc0: MMC clock 2640000 -> 18480000 Hz, PCLK 66000000 Hz |
07:07.06 | maejrep | [ 4.910091] mmc0: Slot eject status = 0 |
07:07.06 | maejrep | [ 4.920030] mmc0: Power save feature enable = 0 |
07:07.06 | maejrep | [ 4.926042] mmc0: DM non-cached buffer at ffc03000, dma_addr 0x10c47000 |
07:07.08 | maejrep | [ 4.930061] mmc0: DM cmd busaddr 281309184, cmdptr busaddr 281309952 |
07:07.16 | maejrep | yeah, the dmesg |
07:07.28 | tmzt | what was the cmdline? |
07:08.00 | maejrep | msmsdcc_id=3 |
07:08.13 | tmzt | 48,102 ? |
07:08.25 | tmzt | it was 26,0 in that dmesg wasn't it? |
07:08.52 | maejrep | so, CMD8 times out, CMD5 times out, CMD55 gives EILSEQ, |
07:08.55 | maejrep | end up with [ 7.570152] mmc0: error -110 whilst initialising MMC card |
07:09.29 | maejrep | yeah, 26 is with sdc2, which isn't right based on my a8600000 dumps |
07:09.39 | maejrep | 24 was sdc1, and 48 is sdc3 |
07:09.55 | tmzt | 26 is sdc2? |
07:10.10 | maejrep | yes |
07:10.25 | maejrep | <PROTECTED> |
07:11.11 | maejrep | a8600000 | 2e1bfeaf | .... <-- with card inserted |
07:11.16 | maejrep | a8600000 | 261bfeaf | ...& <-- card ejected |
07:12.14 | maejrep | and from http://74.125.45.132/search?q=cache%3Ahttp%3A%2F%2Fwiki.xda-developers.com%2Findex.php%3Fpagename%3DRaphaelMemoryMap&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a -> "0x8000000-sd2" |
07:12.28 | maejrep | (0-based, so that means sdc3) |
07:13.21 | maejrep | http://www.privatepaste.com/d9kxXlToeh - curent dmesg |
07:17.09 | tmzt | so it's not 3 either then? |
07:17.33 | tmzt | why is yours different from toer and AstainHellbr*ng |
07:18.28 | maejrep | I think now it might just be a clock rate issue |
07:18.51 | tmzt | with your card? |
07:22.22 | maejrep | is there a way to determine what clock rate the card should request? |
07:22.47 | maejrep | like if I plug it into another sd slot on a linux box, should I get that info? |
07:24.49 | maejrep | or is that the controller that would have the issue? |
07:27.42 | maejrep | tmzt, know whats required to get a change to regs_*.py to take effect in console? |
07:27.48 | maejrep | haretconsole |
07:38.29 | tmzt | run ./console again |
07:38.45 | tmzt | haven't looked at that code in detail |
07:40.30 | maejrep | doesn't seem to take effect by just running console |
07:41.27 | maejrep | do I have to compile the .py into .pyc? |
07:41.35 | dariball | is there a way to not start the framebuffer-keyboard (htc touch diamond android 1.0 using lavender.t's kernel) |
07:43.31 | maejrep | oh |
07:43.41 | maejrep | I removed the .pyc and it recompiled it :) |
07:44.13 | maejrep | only way I know of is to disable the keypad init code in board-htcraphael :x |
07:44.24 | maejrep | i don't think there's a command line argument to turn it off |
07:50.23 | *** join/#htc-linux lavender-t (n=jerrey@c-24-17-204-47.hsd1.wa.comcast.net) |
07:50.25 | dariball | because using balsat's android_fs.tar.gz from http://217.128.108.212/master/ maps my hardware-home-button to "home" and any click on the framebuffer keyboard crashes the home application .... most of the other apps show the same behaviour .... using the ext2 image from touch of jobo all the apps work, but no busybox/telnetd is bad ... tried tweaking touch of jobo's image didn't work^^ |
07:52.31 | dariball | merging the "features" from both would make it "nearly usable" as there would be no need for the framebuffer keyboard, because the software keyboard from jobo's image also works fine... |
08:02.38 | maejrep | tmzt/lavender-t: |
08:02.39 | maejrep | 002.533 TRACES 91500000(0 1)=3 @~f000fe50 |
08:02.40 | maejrep | 002.632 TRACES 91500000(0 1)=0 @~f000fe50 |
08:02.40 | maejrep | 002.632 TRACES 91500000(0 1)=3 @~f000fe50 |
08:02.40 | maejrep | 003.004 TRACES 91500000(0 1)=0 @~f000fe50 |
08:02.40 | maejrep | 003.004 TRACES 91500000(0 1)=3 @~f000fe50 |
08:02.40 | maejrep | 009.061 TRACES 91500000(0 1)=0 @~80029a48 |
08:02.49 | maejrep | ^ definitely sd2 on raph800 |
08:02.57 | maejrep | (sdc3) |
08:05.07 | lavender-t | oh maejrep, you are still tracking it ? |
08:05.22 | lavender-t | i just saw your irclog yesterday |
08:05.31 | maejrep | trying to ;o |
08:05.32 | tmzt | dariball: there is a soft kb for android 1.0 (non cupcake)? |
08:06.07 | lavender-t | i saw -84 too before |
08:06.22 | lavender-t | that was when the clock freq was not correct |
08:06.29 | dariball | tmzt, yes using jobo's image it shows up for example if i click inside google search on the right-hand desktop |
08:06.53 | tmzt | ah someone in #android might like to know this |
08:07.18 | tmzt | cupcake is not stable and soft key is one of the requested features |
08:07.26 | maejrep | lavender-t, ok, but that was on sdc1, which i realize now is completely wrong |
08:07.52 | lavender-t | ok so you figured out it should be sdc3 ? |
08:08.00 | maejrep | (still probably a clock issue but I'm not trying to get wifi working yet :p) |
08:08.22 | maejrep | well yeah from what i can tell... but get this: wifi is enabled, and my card is inserted... |
08:08.33 | maejrep | but a8600000 shows only 0x80 enabled |
08:08.37 | maejrep | which is sd0 (wifi) |
08:08.39 | tmzt | does raph have internal nand on sd? |
08:09.40 | lavender-t | i think the sdc clocks could be mostly off |
08:09.49 | lavender-t | only turn on when you access the sd |
08:09.53 | maejrep | tmzt, I'm not sure |
08:09.59 | lavender-t | to save power |
08:10.09 | tmzt | how much stoarage does it have? |
08:10.14 | maejrep | lavender-t, yeah that makes sense... I just re-inserted it and saw the sdc3 bit turn on for a few seconds |
08:10.24 | lavender-t | cool |
08:10.46 | maejrep | 003.113 TRACES 91500000(0 1)=3 @~f000fe50 |
08:10.46 | maejrep | 003.113 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:10.46 | maejrep | 003.216 TRACES 91500000(0 1)=0 @~f000fe50 |
08:10.46 | maejrep | 003.216 TRACES CKEN: SDC3(59)=0 @~f000fe50 |
08:10.46 | maejrep | 003.216 TRACES 91500000(0 1)=3 @~f000fe50 |
08:10.47 | maejrep | 003.216 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:10.50 | maejrep | 003.581 TRACES 91500000(0 1)=0 @~f000fe50 |
08:10.51 | maejrep | 003.581 TRACES CKEN: SDC3(59)=0 @~f000fe50 |
08:10.53 | maejrep | 003.581 TRACES 91500000(0 1)=3 @~f000fe50 |
08:10.55 | maejrep | 003.581 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:10.57 | maejrep | 009.610 TRACES 91500000(0 1)=0 @~80029a48 |
08:10.59 | maejrep | 009.610 TRACES CKEN: SDC3(59)=0 @~80029a48 |
08:11.17 | maejrep | (inserted the card at 003, and I guess it times out and turns off at 9.6) |
08:11.25 | lavender-t | then you can try sdc3, using kernel parameter msmsdcc_id=3 (if you have my mmc-2.zip) |
08:11.25 | tmzt | long enough to init the card? |
08:11.55 | tmzt | why does it time out in wm? |
08:11.59 | maejrep | tmzt, the weird thing is its turning it on and off |
08:12.08 | maejrep | probably to save power, like lavender-t said |
08:12.37 | tmzt | swetland said it only needed pclk while transfering data |
08:12.54 | tmzt | does it turn on when you copy a lrage file to it? |
08:13.09 | maejrep | pclk? I don't know what register it is |
08:13.13 | maejrep | I don't think we have that info |
08:13.25 | maejrep | <PROTECTED> |
08:13.25 | maejrep | <PROTECTED> |
08:13.28 | tmzt | a0/a4 is sdc1 |
08:13.31 | maejrep | those are the only bits we have documented |
08:13.36 | tmzt | clk/pclk |
08:13.42 | maejrep | those don't change it seems |
08:13.47 | maejrep | I'll add a trace though and see |
08:13.50 | lavender-t | hm the code in clock-7x00.c never touches pclk |
08:14.09 | maejrep | (its b0 and b4 for sdc3 btw ;) |
08:14.32 | maejrep | lavender-t, right, it just hard-codes the rate and enabled status |
08:14.44 | tmzt | lavender-t: is that the full patch mmc-2? |
08:15.13 | lavender-t | it's the full patch for mmc |
08:16.16 | lavender-t | i just had one other minor patch, which is to give a kernel parameter for touchscreen calibration. |
08:16.29 | maejrep | 003.710 TRACES 91500000(0 1)=3 @~f000fe50 |
08:16.29 | maejrep | 003.710 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:16.29 | maejrep | 003.710 TRACES 932000b0(80 82)=4fff5 @~f000fe50 |
08:16.29 | maejrep | 003.814 TRACES 91500000(0 1)=0 @~f000fe50 |
08:16.29 | maejrep | 003.814 TRACES CKEN: SDC3(59)=0 @~f000fe50 |
08:16.30 | maejrep | 003.814 TRACES 932000b0(65 66 69 70 80 81 82)=3ff9b @~f000fe50 |
08:16.32 | maejrep | 003.814 TRACES 91500000(0 1)=3 @~f000fe50 |
08:16.34 | maejrep | 003.814 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:16.36 | maejrep | 004.178 TRACES 91500000(0 1)=0 @~f000fe50 |
08:16.38 | maejrep | 004.178 TRACES CKEN: SDC3(59)=0 @~f000fe50 |
08:16.40 | maejrep | 004.178 TRACES 932000b0(65 66 69 70 81)=1fffd @~f000fe50 |
08:16.42 | maejrep | 004.178 TRACES 91500000(0 1)=3 @~f000fe50 |
08:16.44 | maejrep | 004.178 TRACES CKEN: SDC3(59)=1 @~f000fe50 |
08:18.38 | maejrep | so that looks like it polling different frequencies |
08:18.51 | maejrep | any idea how to drop a single value from a list? |
08:18.56 | maejrep | or i have to clear and re-addlist? |
08:20.09 | maejrep | hmm |
08:20.14 | maejrep | 002.681 TRACES CKEN: SDC3(27)=1 @~f000fe50 |
08:20.15 | maejrep | 002.681 TRACES 932000b0(35 48 50)=4fff5 @~f000fe50 |
08:20.15 | maejrep | 002.681 TRACES 932000b4(72 73 75 80 81 82)=fff90b7c @~f000fe50 |
08:20.15 | maejrep | 002.785 TRACES CKEN: SDC3(27)=0 @~f000fe50 |
08:20.15 | maejrep | 002.785 TRACES 932000b4(72 73 75)=fff9007c @~f000fe50 |
08:20.17 | maejrep | 002.785 TRACES 932000b0(33 35 37 38 48 49 50)=3ff9b @~f000fe50 |
08:20.18 | maejrep | 002.785 TRACES 932000b4(72 73 75 80 81 82 85 86)=ff9e0b78 @~f000fe50 |
08:20.21 | maejrep | 002.785 TRACES CKEN: SDC3(27)=1 @~f000fe50 |
08:20.23 | maejrep | 003.149 TRACES CKEN: SDC3(27)=0 @~f000fe50 |
08:20.25 | maejrep | 003.149 TRACES 932000b4(72 73 75)=ff9e0078 @~f000fe50 |
08:20.27 | maejrep | 003.149 TRACES 932000b0(33 37 38 49)=1fffd @~f000fe50 |
08:20.29 | maejrep | 003.149 TRACES 932000b4(72 73 75 85 86)=fffe0b7c @~f000fe50 |
08:20.31 | maejrep | 003.149 TRACES CKEN: SDC3(27)=1 @~f000fe50 |
08:20.32 | maejrep | 009.322 TRACES CKEN: SDC3(27)=0 @~80029a48 |
08:20.35 | maejrep | 009.322 TRACES 932000b4(72 73 75)=fffe007c @~80029a48 |
08:20.42 | tmzt | I know you can undo ibit with wbit?? |
08:20.53 | maejrep | i just cleared and re-added |
08:21.01 | tmzt | yeah |
08:21.16 | maejrep | so, i'm kind of curious about the b4 values |
08:21.22 | lavender-t | btw maejrep, which haret build are u using ? |
08:21.42 | maejrep | pre-0.5.3 |
08:21.42 | lavender-t | i've never get the register names resolved for my diamond |
08:21.44 | maejrep | I built it from sources |
08:21.56 | maejrep | I added CKEN myself |
08:22.12 | lavender-t | k ic |
08:22.24 | maejrep | cken = ( |
08:22.24 | maejrep | <PROTECTED> |
08:22.43 | maejrep | <PROTECTED> |
08:22.43 | maejrep | added in regs_msm.py |
08:22.55 | maejrep | then remove regs_msm.pyc if it exists (so it recompiles) |
08:22.58 | lavender-t | cool, thanks ! |
08:23.40 | maejrep | so would it be any use to try those b0/b4 values in clock-7x00.c? |
08:23.51 | tmzt | we should add the gpios and get a patch |
08:24.03 | maejrep | it looks like its stepping up to the final values |
08:24.25 | maejrep | tmzt, what should I add? :P |
08:25.15 | tmzt | copy the twobits from pxa I think |
08:25.57 | maejrep | fff90b7c then fff9007c then ff9e0b78, ff9e0078, fffe0b7c |
08:26.24 | tmzt | sorry? |
08:26.42 | tmzt | these are from msm gpio.h? |
08:26.50 | maejrep | heh, sorry, just trying to make sense of the values for b4 |
08:27.01 | lavender-t | b0 also changes. |
08:27.05 | maejrep | you think the twobits from pxa can just be copied directly? |
08:27.30 | tmzt | not the addresses |
08:27.49 | tmzt | I mean I think thats the structure |
08:28.06 | lavender-t | not sure how ce uses the clock. but the linux first use the lowest freq (144k) to read the status of the sd |
08:28.12 | tmzt | or is that only for altfunction |
08:28.37 | lavender-t | then it sets high freq (20M) |
08:28.49 | tmzt | maejrep: is pc_enable_clk have b0/b4? |
08:28.53 | tmzt | does |
08:28.55 | lavender-t | after the data access is done, it turns off the clock |
08:29.03 | maejrep | ah |
08:29.08 | maejrep | which seems to be what WM is doing |
08:29.25 | lavender-t | yep i guess so. |
08:29.26 | maejrep | of course I can't make sense of these magic numbers to know what frequencies its using |
08:29.44 | maejrep | but gives me some things to try anyway |
08:30.05 | tmzt | does cr2 forumla work? |
08:30.14 | lavender-t | me neither. cr2 posted a formula a couple weeks back but i couldnt make much out of it either |
08:30.15 | tmzt | s/um/mu/ |
08:30.17 | maejrep | tmzt, no, pc_enable_clk takes a clock id and just writes to 0xa860000 a single bit on/off |
08:30.42 | maejrep | I started trying to make his formula work, but didn't quite get there |
08:31.14 | tmzt | so it works for all clks? |
08:31.27 | maejrep | pc_enable_clk? yes (at least for the clocks controlled by CLK_CTL |
08:31.33 | tmzt | lavender-t: what is sdcc set clock |
08:31.41 | lavender-t | it is missing a key factor there, the divisor :) |
08:31.44 | maejrep | there's also A11S_CLK_CNTL for the cpu I'd guess |
08:31.53 | tmzt | its in the pasted dmesg but not maejrep's |
08:31.54 | evocallaghan | Hmm, why is http://git.linuxtogo.org/ not hosted at kernel.org ? |
08:32.16 | evocallaghan | I guess I am missing something |
08:32.27 | maejrep | tmzt, yes it is: [ 4.825462] set_sdcc_host_clock(23) 4000000, 2640000, a0=0001ff3f, a4=ff400b69 |
08:32.41 | tmzt | oh |
08:32.54 | maejrep | but those values don't seem correct |
08:33.07 | tmzt | and for sdc3 it will lis b0/b4 instead? |
08:33.22 | maejrep | no thats just a debug string |
08:33.52 | maejrep | lavender-t calls it a0/a4 because that's the offset from 0xa8600000 that the value sits at for sdc1 |
08:34.05 | tmzt | right |
08:34.30 | lavender-t | maejrep, are you still using the first mmc patch ? |
08:34.32 | maejrep | the value will be from b0/b4, but the a0/a4 in the printk are hard coded |
08:34.38 | maejrep | no, I updated to your second patch |
08:34.51 | maejrep | I tried playing with different freq values too |
08:35.04 | maejrep | but seems way too much like magic numbers to me |
08:35.45 | lavender-t | so you added some debug messages ? |
08:36.31 | maejrep | yes |
08:37.16 | *** join/#htc-linux dream_kill (n=nospam@92.56.48.66) |
08:37.43 | lavender-t | when i was testing it in my diamond, i also found the number i copied directly from ce didnt work. |
08:39.09 | lavender-t | so i just made the "actual_freq" proportional to 528/400 |
08:39.26 | tmzt | ok where was sdcc_set_host_clock added? |
08:39.44 | lavender-t | in file clock-7x00.c |
08:40.50 | lavender-t | and for the high freq (20MHz) i picked the actual_freq that is closest to but not greater than 20M |
08:41.12 | lavender-t | (so indeed it will use 18.48M) |
08:42.13 | maejrep | ah |
08:45.20 | lavender-t | but i remember the lowest freq (144k) would be mapped to 190080 |
08:45.44 | lavender-t | so i'm not sure why there is a 2640000 in your dmesg ? |
08:49.25 | lavender-t | oh maejrep, are you still using a modified msm_sdcc.c ? |
08:53.44 | maejrep | to what extent? |
08:53.53 | maejrep | I think I only have debugging messages in it |
08:54.26 | lavender-t | ic. |
08:56.38 | maejrep | so yeah, cr2's formula can't work, at least with the numbers taken from haret |
08:56.52 | maejrep | but like you said, that may just be an approximation |
08:57.34 | maejrep | the closest I've gotten is: foo( 4, 7, 10, 3, 1, 0, 10 ); |
08:57.43 | maejrep | and that's not quite correct |
08:57.53 | lavender-t | yep. i just made the assumption that using the same magic numbers will end up with the same divisor numbers for vogue and diamond |
08:58.16 | maejrep | hmm, so you didn't change anything? |
08:58.22 | maejrep | or you only changed the clock freqs? |
08:58.45 | lavender-t | i didnt change any a0/a4 values from the vogue code. |
08:58.53 | tmzt | are cpu clks the same on diam and raph? |
08:59.19 | lavender-t | i just changed the freq and actual_freq to have the set_sdcc_host..() function choose a closest value |
08:59.52 | maejrep | but you changed it by a factor of 400:528? |
09:00.17 | maejrep | or was that arbitrary? |
09:00.17 | lavender-t | from the wiki, yest hey are all 528MHz |
09:00.18 | maejrep | heh |
09:00.32 | maejrep | by arbitrary i mean, did you tweak it to "privilege" one freq over another |
09:01.19 | maejrep | so theoretically your clock-7x00 should "just work" if i set msmsdcc_id=3 |
09:01.42 | lavender-t | all actual_freq are just computed by 528 / 400 x vogue_actual_freq |
09:02.00 | maejrep | i see |
09:02.47 | lavender-t | the first field, 'freq' is used by the function to choose which a0/a4 numbers to use. |
09:04.03 | lavender-t | i tweaked it so that the 20MHz will choose the 5th row - 18.48MHz |
09:05.00 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
09:05.47 | maejrep | i see |
09:06.07 | maejrep | so here's what I'm seeing in haret: |
09:06.09 | maejrep | 0x4fff5 , 0xfff90b7c |
09:06.09 | maejrep | clk on |
09:06.10 | maejrep | clk off |
09:06.10 | maejrep | <no chg>, 0xfff9007c |
09:06.10 | maejrep | 0x3ff9b , 0xff9e0b78 |
09:06.10 | maejrep | clk on |
09:06.12 | maejrep | clk off |
09:06.16 | maejrep | <no chg>, 0xff9e0078 |
09:06.18 | maejrep | 0x1fffd , 0xfffe0b7c |
09:06.20 | maejrep | clk on |
09:06.22 | maejrep | ... 6s idle ... |
09:06.24 | maejrep | clk off |
09:06.26 | maejrep | <no chg>, 0xfffe007c |
09:06.38 | lavender-t | so from the dmesg how far did it go ? |
09:06.38 | maejrep | the strange part, which we don't see in the linux driver, is the values where a0(b0) don't change, but b4 does |
09:07.00 | maejrep | I haven't booted into it yet -- I tried your stock values from your mmc-2 patch, and it didn't work |
09:07.32 | *** join/#htc-linux imfloflo (n=imfloflo@187.158.119-80.rev.gaoland.net) |
09:07.44 | maejrep | so, b4 seems to have 0xb00 when the clock is going to be turned on, and 0 when it'll be turned off |
09:07.53 | lavender-t | we have this line: 0x3ff9b , 0xff9e0b78 |
09:08.20 | maejrep | and 1fffd == 0x20000 - 0x3 |
09:08.47 | maejrep | 4fff5 == 0x50000 - 0xb |
09:18.02 | *** join/#htc-linux goxboxlive (n=goxboxli@24.84-48-212.nextgentel.com) |
09:23.36 | maejrep | 006.122 TRACES CKEN: SDC3(27)=1 @~f000fe50 |
09:23.36 | maejrep | 006.122 TRACES 932000b4(72 73 75)=fffe0b7c @~f000fe50 |
09:23.36 | maejrep | 011.102 TRACES CKEN: SDC3(27)=0 @~80029a48 |
09:23.36 | maejrep | 011.102 TRACES 932000b4(72 73 75)=fffe007c @~80029a48 |
09:24.02 | maejrep | so it definitely seems like its turning off the PCLK with 0xb00 to b4 |
09:33.42 | *** join/#htc-linux timebomb (n=tb@91.98.200.120) |
09:35.33 | maejrep | bleh, gotta reboot |
09:50.04 | *** join/#htc-linux maejrep (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
10:00.50 | maejrep | hmm |
10:01.20 | *** join/#htc-linux Rogro82 (n=rogro82@s5591104d.adsl.wanadoo.nl) |
10:01.26 | maejrep | so now when i eject/insert my card, i get: |
10:01.27 | maejrep | [ 110.030544] mmc0: starting CMD51 arg 00000000 flags 000000b5 |
10:01.27 | maejrep | [ 110.040453] mmc0: blksz 8 blocks 1 flags 00000200 tsac 100 ms nsac 0 |
10:01.27 | maejrep | [ 110.050422] mmc0: msmsdcc_start_command: op 33 arg 00000000 flags 000000b5 |
10:01.27 | maejrep | [ 110.060514] mmc0: req done (CMD51): 0: 00000920 5b5aa3cc ffffff8f 0a8000ba |
10:01.27 | maejrep | [ 110.070422] mmc0: 8 bytes transferred: 0 |
10:01.29 | maejrep | [ 110.078204] mmc_sd_init_card: Delay 250 ms |
10:01.31 | maejrep | [ 110.358357] mmc0: starting CMD6 arg 00fffff1 flags 000000b5 |
10:01.33 | maejrep | [ 110.361338] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms nsac 0 |
10:01.37 | maejrep | [ 110.371307] mmc0: msmsdcc_start_command: op 06 arg 00fffff1 flags 000000b5 |
10:01.39 | maejrep | [ 110.560361] mmc0: Command timeout (c584be84 c584be58 c584be2c c584be98) |
10:01.41 | maejrep | [ 110.570331] mmc0: req done (CMD6): -110: 00000000 00000000 00000000 00000000 |
10:01.43 | maejrep | [ 110.570331] mmc0: 0 bytes transferred: 0 |
10:02.27 | maejrep | but in the end: |
10:02.27 | maejrep | [ 113.271307] mmc0: msmsdcc_start_command: op 06 arg 00fffff1 flags 000000b5 |
10:02.27 | maejrep | [ 113.460361] mmc0: Command timeout (c584be84 c584be58 c584be2c c584be98) |
10:02.27 | maejrep | [ 113.470331] mmc0: req done (CMD6): -110: 00000000 00000000 00000000 00000000 |
10:02.27 | maejrep | [ 113.470331] mmc0: 0 bytes transferred: 0 |
10:02.27 | maejrep | [ 113.472131] mmc0: Init card failure (err = -110) |
10:02.52 | maejrep | but cmd51 and cmd6 are actually returning data now it seems |
10:03.19 | maejrep | er, i guess cmd6 isn't.. but the others are |
10:10.52 | maejrep | <PROTECTED> |
10:10.52 | maejrep | <PROTECTED> |
10:11.11 | maejrep | lavender-t, wouldn't that pick the first freq that is higher than the requested frequency? |
10:11.28 | maejrep | is that intended? I thought you said it picks the first frequency lower than freq |
10:12.41 | *** join/#htc-linux JazzY (n=e@cust-02-52869a9a.adsl.scarlet.nl) |
10:20.30 | *** join/#htc-linux kimhoon (n=kimhoon@s559116c1.adsl.wanadoo.nl) |
10:22.05 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
10:41.16 | maejrep | [ 7.123509] mmc0: error -110 whilst initialising MMC card |
10:41.22 | maejrep | shouldn't I be expecting "SD card"? heh |
10:44.11 | maejrep | alright, i need sleep :/ i feel like i'm going around in circles now |
11:06.46 | *** join/#htc-linux MethoS- (n=clemens@host-091-097-243-099.ewe-ip-backbone.de) |
11:07.33 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
11:12.37 | *** join/#htc-linux Shadowmite (i=foglem@shadowmite.com) |
11:14.17 | *** join/#htc-linux ponicg_ (n=ponicg@ool-182d907a.dyn.optonline.net) [NETSPLIT VICTIM] |
11:14.17 | *** join/#htc-linux mrmg (n=mrmg@spc1-bror4-0-0-cust383.asfd.broadband.ntl.com) [NETSPLIT VICTIM] |
11:19.23 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
11:28.17 | *** join/#htc-linux axe_hm (n=weechat@217.116.62.236) |
11:37.40 | Marajin | maejrep: Nah it always says MMC I think... or.. wait no it recognized SDHC as SDHC, maybe it should see SD as SD too |
11:49.14 | *** join/#htc-linux drasar (n=maik@213.192.22.2) |
11:51.41 | maejrep | drivers/mmc/core/mmc.c: printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", |
11:51.41 | maejrep | drivers/mmc/core/sd.c: printk(KERN_ERR "%s: error %d whilst initialising SD card\n", |
11:51.41 | maejrep | drivers/mmc/core/sdio.c: printk(KERN_ERR "%s: error %d whilst initialising SDIO card\n", |
12:13.15 | *** join/#htc-linux t33k4 (n=thomas@87.200.165.125) |
12:17.48 | *** join/#htc-linux the_fish (n=cruel0fi@p5491D429.dip.t-dialin.net) |
12:33.47 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
12:56.32 | *** join/#htc-linux ttbob (n=ttbob@xdsl-213-196-244-254.netcologne.de) |
13:08.05 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
13:15.46 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
13:30.33 | *** join/#htc-linux Sparky_ (n=maik@77.20.236.81) |
13:31.38 | *** join/#htc-linux exco (n=exco@e181066184.adsl.alicedsl.de) |
13:31.39 | *** join/#htc-linux metter (n=metter@156-157.62-81.cust.bluewin.ch) |
13:54.48 | *** join/#htc-linux Sparky__ (n=maik@77.20.236.81) |
13:59.36 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d310.pool.einsundeins.de) |
14:01.07 | *** join/#htc-linux elmo40 (n=Leo@CPE0017ee09ce6d-CM00195ee6631c.cpe.net.cable.rogers.com) |
14:15.55 | dariball | is everyone having the same issues with crashing applications on android 1.0 (htc touch diamond) (balsat image) ? |
14:17.03 | *** join/#htc-linux timebomb (n=tb@91.98.200.120) |
14:19.11 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
14:20.03 | *** join/#htc-linux MethoS-- (n=clemens@dyndsl-085-016-164-200.ewe-ip-backbone.de) |
14:23.18 | *** join/#htc-linux ttbob (n=ttbob@xdsl-81-173-170-8.netcologne.de) |
14:34.40 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
14:50.30 | *** join/#htc-linux balsat1 (n=kll@87.72.13.87) |
14:54.03 | *** join/#htc-linux timebomb (n=tb@91.98.200.120) |
15:11.58 | *** join/#htc-linux balsat (n=kll@87.72.13.87) |
15:12.59 | lupine_85 | woo, lavender-t's build runs on my touch pro :D |
15:16.06 | tekkdrone | :D |
15:16.25 | tekkdrone | is that a cdma or gsm build? |
15:16.39 | lupine_85 | not that anything *works* just yet except the GUI (mostly. in places) |
15:16.39 | tekkdrone | I just picked up a raph500 last week :D |
15:16.44 | lupine_85 | GSM/Raph100 |
15:16.49 | tekkdrone | d'oh |
15:17.04 | lupine_85 | tekkdrone: do you know if the keyboard seems the same, or different? |
15:17.27 | tekkdrone | from raph to raph I'd imagine the keys would be the same for cost reasons |
15:17.51 | lupine_85 | would really like to see them working :D |
15:17.59 | tekkdrone | different from other units? definitely considering my old primary was an htc apache |
15:18.03 | lupine_85 | seems to bwe beyond my meagre skills, though |
15:18.32 | tekkdrone | eh, I thought the same when I started porting kevin's apache stuff to 2.6.25 |
15:19.51 | tekkdrone | was totally vindicated first time I got android up on apache though :) |
15:21.34 | *** join/#htc-linux metter_ (n=metter@163-175.2-85.cust.bluewin.ch) |
15:22.39 | lupine_85 | points you in the direction of GPIO33 ;) |
15:24.29 | tekkdrone | lol, I haven't even looked at the raph goodies yet, the purchase was almost as much about freeing up the Apache for dev as it was about snagging a much needed upgrade |
15:24.37 | tekkdrone | :D |
15:25.30 | tekkdrone | brb, gotta get the hell outta windows |
15:51.06 | *** join/#htc-linux drasar (n=maik@213.192.22.2) |
15:51.42 | *** join/#htc-linux tekkdrone (n=tekkdron@72.183.115.231) |
15:59.10 | *** join/#htc-linux dariball (n=dariball@p4FDC5258.dip.t-dialin.net) |
16:03.48 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
16:11.46 | *** join/#htc-linux radem205 (n=aaa@e144118.upc-e.chello.nl) |
16:53.07 | *** join/#htc-linux Camvoya (i=Camvoya@239.Red-83-35-159.dynamicIP.rima-tde.net) |
17:05.02 | *** join/#htc-linux TripleDES (n=sergio@80.27.102.27) |
17:22.35 | *** join/#htc-linux myxor (n=myxor@pdbn-4d089f0a.pool.mediaWays.net) |
17:31.11 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
17:33.26 | *** join/#htc-linux mdrobnak (n=mdrobnak@pool-96-232-187-37.nycmny.fios.verizon.net) |
17:33.34 | mdrobnak | Hey everyone |
17:36.21 | Camvoya | any spanish ? |
17:38.18 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
17:40.34 | mdrobnak | So, lavender.t posted his patch on xda-dev, and it looks like the main thing that was changed was the clock driver for the SD card stuff, but he said that was already in his last patch...So I guess I must have missed that one.. |
17:44.33 | *** join/#htc-linux lpotter (n=lpotter@58.173.176.153) |
17:45.09 | lavender-t | hello mdrobnak |
17:45.26 | mdrobnak | Hey there, thanks for posting the patch |
17:46.04 | mdrobnak | I was on here yesterday doing some testing with NetRipper and tmzt using your kernel |
17:46.27 | *** join/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
17:47.06 | lavender-t | yeah i browsed thru the logs |
17:47.21 | lavender-t | so the smd stuff indeed was working ? |
17:47.31 | mdrobnak | smd0 is, smd1 is not. |
17:47.47 | dcordes_ | hi |
17:47.48 | lavender-t | alrighty cool ! |
17:47.53 | lavender-t | hi dcordes |
17:48.06 | mdrobnak | I'm on the AT&T stock radio too, but I DID do a Hard-SPL install.. |
17:48.11 | mdrobnak | Hey dcordes |
17:48.36 | lavender-t | ah. let me try ... |
17:48.54 | mdrobnak | which model do you have lavender-t? |
17:49.06 | lavender-t | diam110 |
17:49.15 | mdrobnak | interesting |
17:49.17 | lavender-t | i havent flashed any hardspl yet |
17:49.19 | mdrobnak | I'm using the Fuze. |
17:49.45 | mdrobnak | (RAPH110) |
17:52.39 | dcordes_ | lavender-t: where's the clock-msm7x00.c taken from? |
17:53.05 | lavender-t | you mean clock-7x00.c ? it was from vogue branch. |
17:53.16 | lavender-t | i cleaned up the code |
17:53.42 | lavender-t | also pulled in the original clock.c's acpu part |
17:54.04 | lavender-t | just used the clock table in vogue. |
17:54.07 | mdrobnak | well, that seems to have done the trick then.. |
17:54.17 | mdrobnak | at least with my unit, it works fine |
17:54.24 | mdrobnak | (seems to) |
17:57.27 | dcordes_ | lavender-t: what does __init msmsdcc_id_setup function do? |
17:58.16 | lavender-t | oh it just reads the kernel parameters msmsdcc_id= |
17:58.49 | dcordes_ | does it replace the mmc detect gpio? |
17:58.54 | lavender-t | some phones may have the mmc controlled by sdc other than sdc2 |
17:59.17 | lavender-t | i dont think the detect code is in place yet. |
17:59.24 | *** join/#htc-linux era- (n=im@70.16.65.252) |
17:59.24 | dcordes_ | we should add the board files and make it machine specific |
17:59.34 | lavender-t | currently it is hardcoded to "sd present" |
18:00.28 | lavender-t | yeah ... this one is just a workaround ... 'cause i was not sure if the clock fix would work |
18:00.47 | lavender-t | and people might want to try other sdc # |
18:01.18 | lavender-t | i dont think this part is final yet ... |
18:01.40 | mdrobnak | lavender-t: Any idea why Android 1.0 can't read the signal status any more? In 0.8 I can make / receive calls (no audio) but in 1.0 it semes totally broken...Yet I can access /dev/smd0 with your kernel with no issue.. |
18:02.25 | dcordes_ | lavender-t: ok I just wanted to make sure I understand the patch |
18:02.38 | lavender-t | hm sorry mdrobnak, i have no idea yet. |
18:03.05 | lavender-t | i havent tried that in 0.8. so i'll give it a try first. |
18:03.42 | lavender-t | btw, mdrobnak, did you say echo "AT\r" > /dev/smd0 worked ? |
18:03.56 | mdrobnak | echo -e, but yea. |
18:04.11 | mdrobnak | I used your kernel.. |
18:04.14 | lavender-t | oh stupid me, forgot -e |
18:04.16 | lavender-t | :( |
18:04.17 | mdrobnak | The angstrom initrd from netripper |
18:04.24 | mdrobnak | connected via usb networking.. |
18:04.29 | mdrobnak | opened two ssh sessions |
18:04.34 | mdrobnak | one "cat /dev/smd0" |
18:04.45 | mdrobnak | one "echo -e 'ATE1V1\r' > /dev/smd0 |
18:04.48 | mdrobnak | and got "OK" |
18:05.40 | mdrobnak | That worked with the last NetRipper kernel too I think. |
18:08.23 | lavender-t | yeah that works in my smd0 too |
18:09.08 | lavender-t | my /dev has smd0 and smd27 only |
18:09.26 | dcordes_ | 27 might be gps |
18:09.31 | *** join/#htc-linux arjen_ (n=arjen@e144118.upc-e.chello.nl) |
18:09.41 | dcordes_ | if you activate gps in wince and boot it should give you nmea |
18:10.02 | NetRipper | if you activate gps and boot, the kernel crashes |
18:10.13 | NetRipper | no oops, no panic, just hangs |
18:10.24 | lavender-t | :) |
18:10.36 | NetRipper | at a random point even |
18:10.44 | NetRipper | lavender-t, good job on the mmc :) |
18:11.01 | mdrobnak | Hey NetRipper |
18:11.02 | lavender-t | oh thanks ! |
18:11.04 | NetRipper | lavender-t, i tried your mmc-02 patch a while back but it didnt work for me, but the kernel that is on the wiki now, does give me mmc |
18:11.21 | lavender-t | which kernel ? |
18:11.25 | NetRipper | lavender-t, im going to try your mmc-03 soon.. but my server got rooted, so i got to fix that first ;) |
18:11.29 | NetRipper | the binary on wiki |
18:11.45 | lavender-t | nothing new thou ... :( |
18:12.07 | lavender-t | 'cause there is a kernel from jobo too |
18:12.07 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
18:12.24 | NetRipper | lavender-t, the diamond android 1.0 package on progress section @ wiki has a zImag |
18:12.29 | lavender-t | netripper, i saw you were saying to switch to trout ? |
18:12.36 | lavender-t | and use kernel 2.6.27 ? |
18:12.41 | NetRipper | that image also mounts sd card on raphael |
18:12.55 | NetRipper | just need to use jobo's initrd to make it address the correct node |
18:13.12 | NetRipper | lavender-t, it was a suggestion.. if google continues on that tree, maybe we should swap as well.. was a wild idea ;) |
18:13.40 | lavender-t | i tried trout weeks ago for a very short time |
18:13.44 | NetRipper | they made usb support and mmc support better on that tree |
18:13.46 | lavender-t | no much success |
18:13.49 | NetRipper | and cleaned up a lot |
18:13.50 | lavender-t | couldnt get the usb work |
18:13.53 | NetRipper | ah |
18:14.06 | *** join/#htc-linux arjen_ (n=arjen@e144118.upc-e.chello.nl) |
18:14.11 | lavender-t | it had lots of trout specific stuff like GPIOs |
18:14.17 | NetRipper | true |
18:14.20 | arjen_ | how can I open a .db file in ubuntu? |
18:14.27 | lavender-t | halibut looked simpler and |
18:14.46 | NetRipper | arjen_, this is a linux channel for embedded devices ;) |
18:14.55 | *** join/#htc-linux MethoS- (n=clemens@dyndsl-085-016-164-200.ewe-ip-backbone.de) |
18:15.36 | arjen_ | yes I know. But I have extract the data.img of Android and I was wondering how I could open a .db file to see what is init :) |
18:15.55 | NetRipper | ah |
18:16.00 | lavender-t | i wonder how far were you with the trout kernel, netripper ? |
18:16.39 | NetRipper | lavender-t, on raphael all i got was a white screen.. fb or lcd was not inited properly, or mis-inited.. no idea |
18:17.00 | NetRipper | lavender-t, on diamond it boots to console though, but i discontinued it as halibut works for both |
18:17.29 | NetRipper | if that raphael white screen issue would be solved on the new kernel due to cleanups or similar, it might be an idea to use trout |
18:17.48 | lavender-t | urh ... yeah that's my feeling ... for trout we need to figure out where to make the cuts |
18:18.08 | NetRipper | yes |
18:18.18 | NetRipper | though, on the other hand, if halibut is working, we could also just stick with it ;p |
18:18.29 | NetRipper | but i found trout to be a bit more nicely setup |
18:18.36 | NetRipper | divided into seperate files etc |
18:19.06 | lavender-t | yeah ... the code look more sophiscated :) |
18:19.39 | mdrobnak | What model is halibut? |
18:19.47 | mdrobnak | I know trout refers to the G1 |
18:21.23 | mdrobnak | Btw, I was thinking of adding a "tasks" section to the wiki - ie, R/W access to /dev/smd0, R/W access to /dev/smd1, audio routing, sd storage access, hardware button mapping, hardware keyboard... anything else anyone can think of as a task? |
18:21.30 | NetRipper | halibut is the device they should android on before g1 |
18:21.35 | NetRipper | showed* |
18:21.45 | mdrobnak | ah |
18:21.47 | mdrobnak | interesting |
18:21.51 | NetRipper | as proof of concept |
18:22.03 | NetRipper | on stands etc |
18:22.18 | mdrobnak | so in theory any cleanups are not going to be done to anything related to halibut |
18:22.26 | NetRipper | or actually, that is what i believe, im not 100% sure ;p |
18:22.56 | lavender-t | mdrobnak: since the AT cmd indeed worked, i wonder what you meant by the phone not working in v1 ? |
18:23.01 | NetRipper | well, cleansups also have to do with the framebuffer code, mmc and sd code, mddi and others, which halibut is using as well |
18:23.32 | NetRipper | lavender-t, seems android 1.0 is accessing the modem differently from android 0.8 |
18:23.33 | mdrobnak | lavender-t: I'll try it again, but in 0.8 I get a signal meter, and in 1.0 I get none. it also failed to place a call in 1.0 |
18:24.37 | NetRipper | i.e. 0.8 is using the smd0 thingy, android 1 may be (trying to) use another way.. maybe its just not configured correctly |
18:24.54 | NetRipper | anyone tried to take android 1 from vogue? instead of building it from scratch? |
18:25.25 | lavender-t | havent tried the vogue images yet ... |
18:26.32 | NetRipper | lavender-t, btw you could commit your patches to git |
18:26.57 | NetRipper | perhaps clean up the clock bit so it reflects the correct chipset ;) |
18:28.20 | *** join/#htc-linux richp3 (n=someone@c-24-127-222-214.hsd1.fl.comcast.net) |
18:28.25 | richp3 | hey guys |
18:28.59 | richp3 | im trying to set up an enviroment where i can compile the android kernel but i havent had much luck so far |
18:29.03 | richp3 | anyone here can help me out pls? |
18:29.21 | mdrobnak | richp3: Which device? |
18:29.49 | mdrobnak | http://wiki.xda-developers.com/index.php?pagename=BuildTheKaiserKernel |
18:30.17 | mdrobnak | That pages has an overview of how to do it, but it's somewhat specific to (not actually Kaiser) Raphael |
18:31.00 | *** join/#htc-linux heema (n=weechat@217.139.56.161) |
18:31.31 | Camvoya | richp3 i`m triyin to compile kernel kaiser too |
18:31.57 | *** join/#htc-linux t33k4 (n=thomas@87.200.165.125) |
18:32.48 | Camvoya | what is MTYPE 1910 |
18:33.03 | richp3 | well i gotta go |
18:33.05 | richp3 | c'ya later |
18:33.18 | NetRipper | that's the raphael mtype |
18:33.26 | Camvoya | ahm |
18:33.31 | NetRipper | used in haret |
18:33.45 | NetRipper | used for diamond too btw |
18:33.52 | Camvoya | so, all kernel that i can find of kaiser have the ichmatch mtype ? |
18:33.59 | NetRipper | no, kaiser has a different mtype |
18:34.35 | mdrobnak | lavender-t: That calibration parameter thing you did for the kernel - it seems to spit out the values in decimal, vs your input needs hex, is that right? |
18:34.40 | Camvoya | but, why i have to put the mtype ? |
18:34.51 | NetRipper | i.e. if you run a kaiser kernel with raphael mtype, it'll do nothing, as it doesn't recognize the machine |
18:35.16 | Camvoya | is a protection ? |
18:35.31 | NetRipper | mtype identifies the machine, which the kernel uses to identify which board it should use at runtime |
18:35.44 | NetRipper | no, it's not protection, it's a way of identifying |
18:36.15 | tmzt | arjen_: sqlite3 |
18:36.21 | lavender-t | mdrobnak: the printk() output on the screen (when you click the red dots) are hexical |
18:36.24 | Camvoya | but, the filename of the kernel is write too in the config file of haret |
18:36.25 | tmzt | arjen_: but you also ask in #android |
18:36.35 | tmzt | can also |
18:36.57 | lavender-t | the msmts_calib= parameters can accept both hex and decimal. just the hex needs 0x prefix. |
18:36.57 | NetRipper | kaiser has mtype 1553 |
18:37.01 | mdrobnak | lavender-t: I tried putting in what it output, and it kinda ignored it. |
18:37.08 | mdrobnak | Ah, maybe that's why |
18:37.10 | mdrobnak | I didn't put 0x |
18:37.24 | lavender-t | ok that's it :) |
18:37.29 | *** join/#htc-linux ionstorm (n=ion@ip68-110-123-12.ph.ph.cox.net) |
18:37.37 | NetRipper | Camvoya, yes, but a single kernel can have support for multiple devices... the mtype indicates which device it is.. so that the kernel knows which board to use.. |
18:37.47 | mdrobnak | lavender-t: Ok, I get a "Not registered on network." error when trying to dial. |
18:37.56 | NetRipper | Camvoya, mtype is short for machine type |
18:38.12 | mdrobnak | I've got a telnet session going too, anything specific I should look for? |
18:38.13 | NetRipper | Camvoya, if you have a kaiser kernel, you should use 1553 as mtype |
18:39.22 | lavender-t | yeah i think as netripper indicated, it looks to be an android issue instead of the kernel. |
18:39.51 | Camvoya | muchas gracias NetRipper |
18:39.58 | NetRipper | Camvoya, nps |
18:40.15 | mdrobnak | I'm guessing at this point, none of us have messed with the configuration of Android yet, eh? |
18:40.40 | NetRipper | i messed with 0.8's config, but 1.0 is different im afraid |
18:41.45 | mdrobnak | There's not a whole lot running, honestly, according to ps |
18:44.29 | mdrobnak | I think I was able to change the screen timeout to never |
18:44.42 | mdrobnak | I then killed android and restarted it |
18:46.34 | mdrobnak | didn't work twice though. :-( |
18:46.38 | mdrobnak | I dun killed it big time |
18:46.42 | mdrobnak | but at least I can look at the fs |
18:48.22 | *** join/#htc-linux Xime (n=xime@bankize.net) |
18:50.03 | NetRipper | hehe |
18:50.15 | mdrobnak | what is rild? |
18:50.25 | NetRipper | ril is the modem |
18:50.27 | NetRipper | d is daemon |
18:50.50 | mdrobnak | A-ha |
18:50.56 | mdrobnak | I think it's defaulting to /dev/ttyS0 |
18:51.13 | NetRipper | at least, on winmo it's ril.dll that is responsible for modem communications |
18:51.15 | NetRipper | ah |
18:51.21 | NetRipper | guess that should be /dev/smd0 |
18:51.36 | mdrobnak | I'm going to try something |
18:52.33 | mdrobnak | I'm going to reboot it, sym-link /dev/ttyS0 to /dev/smd0 and see if I get anything |
18:52.51 | NetRipper | :) |
18:55.38 | dcordes_ | mdrobnak: which one is defaulting to that device? |
18:55.51 | mdrobnak | Looks like android 1.0 but I'm guessing at the second. |
18:55.55 | mdrobnak | err investigating. |
18:55.56 | mdrobnak | ;-) |
18:56.15 | dcordes_ | try frameworkd instead |
18:57.27 | mdrobnak | no go on that one. (ttyS0) |
18:58.09 | mdrobnak | <PROTECTED> |
18:59.51 | *** part/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
19:01.07 | mdrobnak | A ha! |
19:01.11 | mdrobnak | a minute later |
19:01.17 | mdrobnak | I got a signal level |
19:01.36 | mdrobnak | And dialing |
19:01.46 | mdrobnak | and ringing on my home phone |
19:02.10 | mdrobnak | and now I have to go hang up the answering machine |
19:02.11 | mdrobnak | brb |
19:02.23 | mdrobnak | OOHH |
19:02.26 | mdrobnak | it didn't like that |
19:02.42 | NetRipper | sweet ;) |
19:02.43 | mdrobnak | The framebuffer just whent black |
19:02.55 | mdrobnak | It's still alive though |
19:03.26 | NetRipper | term blank? |
19:04.05 | mdrobnak | Ohh |
19:04.08 | mdrobnak | I know what happened |
19:04.15 | mdrobnak | because it was in a call, it suspended the screen. |
19:04.31 | *** join/#htc-linux ALoGeNoff (n=alogeno@245.Red-79-153-25.staticIP.rima-tde.net) |
19:04.45 | dcordes_ | yea it does that |
19:04.55 | dcordes_ | mdrobnak: you have a cdma raphael? |
19:05.07 | lavender-t | wow cool mdrobnak ! |
19:05.32 | mdrobnak | No, GSM, HTC Fuze, AT&T branded |
19:06.10 | mdrobnak | Trying something |
19:06.19 | mdrobnak | <PROTECTED> |
19:06.24 | mdrobnak | seeing if it's read during boot |
19:06.27 | dcordes_ | ok so the channels are working fine |
19:06.47 | mdrobnak | singular - smd0 works fine |
19:06.48 | mdrobnak | smd1 does not |
19:07.24 | dcordes_ | you don't get that device node? |
19:08.02 | mdrobnak | nope. :-( |
19:09.24 | dcordes_ | can you try making a call with frameworkd? |
19:10.01 | Camvoya | mdrobnak RIL is Radio Interface Layer |
19:10.20 | mdrobnak | ok, |
19:10.22 | tmzt | mdrobnak: with android? 0.8 or 1.0? |
19:10.25 | mdrobnak | build.prop IS read |
19:10.27 | mdrobnak | 1.0 |
19:10.34 | mdrobnak | and indeed, that's all that needs to be changed |
19:10.45 | mdrobnak | rild.libargs=-d /dev/ttyS0 needs to change to /dev/smd0 |
19:11.05 | mdrobnak | in /system/build.prop |
19:11.56 | mdrobnak | dcordes_: How do you make a call with frameworkd? |
19:13.52 | dcordes_ | mdrobnak: on the command line |
19:14.09 | dcordes_ | mdrobnak: I'm preparing a small initramfs for testing |
19:14.18 | dcordes_ | tmzt: I built an armv5te console image |
19:15.46 | mdrobnak | dcordes_: Ok, I'll be back in 5 minutes.. |
19:18.03 | dcordes_ | mdrobnak: ok. need any special configurations for the usbnet to work or so? |
19:19.12 | *** join/#htc-linux ALoGeNo (n=alogeno@245.Red-79-153-25.staticIP.rima-tde.net) |
19:23.37 | mdrobnak | dcordes: not that I know of, I'm using the ip eveyone else is using.. |
19:23.47 | mdrobnak | 192.168.0.206 on the phone, .200 on my laptop |
19:24.14 | dcordes_ | ok |
19:26.09 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
19:28.08 | *** join/#htc-linux TripleDE1 (n=sergio@195.55.47.60) |
19:29.11 | dcordes_ | angstrom config defaults to 202 |
19:30.01 | mdrobnak | ok, no prob |
19:32.46 | *** join/#htc-linux radem205 (n=aaa@e144118.upc-e.chello.nl) |
19:35.33 | balsat | Editing the /system/build.prop /dev/ttyS to /dev/smd0 is making Android asking for a pin code on bootup |
19:36.20 | mdrobnak | balsat: does your sim card require a pin? |
19:36.23 | dcordes_ | balsat: if that's a problem disable pin code in your sim card |
19:37.07 | balsat | I will startup windows and disable the sim code and try again |
19:37.18 | dcordes_ | mdrobnak: http://linuxtogo.org/~lgorris/builds/OE/htcraphael/angstrom-fso-20090103.cpio.gz |
19:38.25 | dcordes_ | mdrobnak: see if you can boot with this initrd |
19:38.28 | mdrobnak | ok give me a few |
19:38.33 | dcordes_ | ok thanks |
19:38.59 | dcordes_ | I forgot to symlink init |
19:39.17 | mdrobnak | do you need to modify it? |
19:39.25 | dcordes_ | add init=/sbin/init to cmdline if there's a problem |
19:39.33 | mdrobnak | k |
19:39.58 | *** join/#htc-linux TripleDES (n=sergio@80.27.102.135) |
19:40.18 | dcordes_ | if it works start up framework with 'frameworkd -s ogsmd -d' |
19:40.39 | dcordes_ | it should fork to background with no errors |
19:40.56 | dcordes_ | then to dial use cli-framework |
19:41.42 | dcordes_ | the dbus command to make a voice call is gsmcall.Initiate('+012345678','voice') |
19:42.47 | balsat | I got a signal in Android |
19:43.06 | balsat | but i cant make a call yet |
19:43.59 | dcordes_ | time for some food. I'll be back later |
19:44.19 | mdrobnak | Ok. will do, I was testing something quick, rebooting back into WinMo now to copy that initrd down. |
19:44.37 | mdrobnak | k |
19:44.46 | mdrobnak | balsat: What does it do? |
19:45.13 | mdrobnak | I just clicked on dialer |
19:45.19 | mdrobnak | put in a number, and it went fine |
19:45.51 | balsat | When i touch a number in the dial app crash |
19:45.57 | mdrobnak | ouch. |
19:46.40 | mdrobnak | what happens if you try it again? |
19:46.44 | mdrobnak | And what phone do you have? |
19:47.32 | balsat | But i think it is the Android i compilede thats making the problem....will try jobo |
19:48.31 | balsat | Diamond |
19:48.53 | mdrobnak | CDMA or GSM version? |
19:49.11 | balsat | Hmmm i dont know... how do i check? |
19:49.18 | mdrobnak | What network? |
19:49.29 | balsat | Danish 3G |
19:49.37 | mdrobnak | ok, that's GSM. |
19:49.41 | balsat | Ok |
19:49.49 | mdrobnak | CDMA is Sprint or Verizon wireless |
19:50.04 | mdrobnak | (except for a few other carriers, those are the two main ones) |
19:50.38 | balsat | Booting to windows and installing jobo's Android |
19:51.03 | mdrobnak | lavender-t may be able to help you out a little more, as he has a diamond |
19:51.30 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
19:52.14 | *** join/#htc-linux Sparky_ (n=maik@77.20.236.81) |
19:55.10 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
20:00.08 | balsat | Same result with jobo's android.... got a signal, and it find my GSM provider "3", but crash when i touch the softdialpad |
20:00.47 | *** join/#htc-linux heema (n=weechat@217.139.56.161) |
20:03.09 | mdrobnak | thats odd |
20:06.58 | *** join/#htc-linux TripleDES (n=sergio@80.27.102.199) |
20:22.10 | mdrobnak | That initrd didn't work |
20:23.16 | *** join/#htc-linux PoohbaLT (n=Poohba@pool-71-168-135-176.cmdnnj.east.verizon.net) |
20:24.26 | *** join/#htc-linux the_fish (n=cruel1@p5491D429.dip.t-dialin.net) |
20:24.33 | the_fish | hello :) |
20:24.57 | the_fish | tmzt, u there? |
20:26.06 | *** join/#htc-linux dcordes (n=dcordes_@unaffiliated/dcordes) |
20:26.17 | dcordes | mdrobnak what did it do? |
20:26.33 | mdrobnak | dcordes: I had trouble with that initrd |
20:26.46 | dcordes | what happened? |
20:26.49 | mdrobnak | it wouldn't boot a few times |
20:27.05 | mdrobnak | then I finally got it to boot and it complained about not being able to find the root file system |
20:27.11 | *** join/#htc-linux MethoS- (n=clemens@host-091-097-243-194.ewe-ip-backbone.de) |
20:27.27 | dcordes | mdrobnak what's in your default.txt |
20:27.30 | dcordes | ? |
20:28.18 | mdrobnak | That took a bit of messing with to get it to boot at all.. |
20:28.30 | mdrobnak | I followed netripper's angstrom default.txt |
20:28.56 | dcordes | can you pastebin the default.txt ? |
20:29.06 | mdrobnak | set INITRD angstrom-fso-20090103.cpio.gz |
20:29.32 | mdrobnak | Not as easily as before, cause it's on my phone hehe |
20:29.42 | dcordes | what's the CMDLINE ? |
20:30.08 | mdrobnak | set cmdline "mem=96M msmsdcc_id=2 init=/sbin/init" |
20:30.48 | mdrobnak | bootlinux at the end |
20:30.48 | mdrobnak | should it be ramboot? |
20:30.59 | dcordes | no |
20:31.19 | mdrobnak | k |
20:31.49 | dcordes | I made everythingt he same way as with the images found at netripper website |
20:32.25 | dcordes | just that ithas no symlink /init to /sbin/init |
20:32.29 | mdrobnak | Odd. |
20:32.50 | mdrobnak | Lemme symlink it |
20:33.12 | dcordes | ok |
20:33.18 | dcordes | I can't rebuild now |
20:35.09 | NetRipper | dcordes, i modified your initrd image to add that calibration stuff and setup usb networking |
20:35.22 | NetRipper | forget calibration, that was the android0.8 initrd |
20:38.20 | mdrobnak | trying again |
20:40.25 | mdrobnak | It hangs at the fb handover |
20:40.38 | mdrobnak | it took almost 30+ seconds the last time till I got the error message |
20:41.08 | NetRipper | when it hangs at fb handover, it doesn't have to do with the initrd yet |
20:41.23 | NetRipper | fb is inited before initrd is used, so something else hangs then |
20:41.36 | NetRipper | maybe just bad luck, try again :) |
20:41.54 | mdrobnak | lol |
20:42.34 | NetRipper | unless you enabled gps before booting linux - then that's the cause ;) |
20:42.47 | mdrobnak | uh.. |
20:42.50 | mdrobnak | nope |
20:43.01 | mdrobnak | boot, enter winmo pin, open file manager, run haret |
20:43.15 | NetRipper | yer ok |
20:43.15 | mdrobnak | bt is enabled |
20:43.31 | NetRipper | well you booted successfully enough times |
20:43.37 | NetRipper | so i guess it's just bad luck or a bad kernel ;) |
20:43.49 | NetRipper | make sure your mtype is set to 1910 |
20:43.51 | mdrobnak | it's the same kernel as before |
20:44.04 | dcordes | zsirc is bestest wince irc client but you can't turn off autoscroll |
20:44.19 | NetRipper | my irc client is better |
20:44.20 | NetRipper | ;p |
20:44.27 | dcordes | mdrobnak you tried something? |
20:44.27 | NetRipper | not yet released though |
20:44.35 | dcordes | cool let me know |
20:44.39 | mdrobnak | lol you guys are hardcore |
20:44.40 | NetRipper | sure :) |
20:44.54 | NetRipper | you cant scroll at all on my client yet though lol |
20:45.00 | mdrobnak | lol |
20:45.00 | *** join/#htc-linux balder (n=balder@h134-54.net.euron.pl) |
20:45.03 | balder | Hi |
20:45.14 | mdrobnak | I'm using Ircle on my hackintosh |
20:45.21 | mdrobnak | but it has scrolling issues too |
20:45.28 | NetRipper | hi balder |
20:45.47 | mdrobnak | I'm rebooting the laptop too |
20:45.50 | dcordes | best is irssi on the kaiser |
20:45.59 | mdrobnak | and pulling the battery on the phone |
20:46.04 | balder | i'm just find a new Android release to htc diamond |
20:46.08 | dcordes | but batery dies to early due to lack of clckc trl |
20:47.31 | dcordes | mdrobnak did you try the symlink? |
20:47.44 | mdrobnak | yeah, failing miserably so far.. |
20:48.06 | balder | i'm thing about. when i'm boot this on me device it's not problem to come back to WM ? |
20:48.10 | dcordes | okbdon't waste your time. I will make new builds tomorrow |
20:48.16 | *** join/#htc-linux TripleDES (n=sergio@80.27.102.24) |
20:48.51 | dcordes | balder it is a problen. you must sofreset to get back into wince |
20:48.52 | NetRipper | balder, when you soft reset with the stylus, it just boots windows mobile again... |
20:49.17 | balder | gr8 :) |
20:49.21 | NetRipper | balder, and it's not fully functional yet... just keep an eye on forum and wiki for progress.. |
20:49.34 | mdrobnak | dcordes: Yah, not sure what the deal is, something's wacky though...it keeps hanging |
20:50.03 | balder | soo what's dosen't works? |
20:50.18 | NetRipper | balder, you should ask, what _does_ work ;) |
20:50.20 | mdrobnak | balder: A better question is to ask what DOES work |
20:50.21 | mdrobnak | lolo |
20:50.26 | NetRipper | gmta ;) |
20:50.32 | mdrobnak | indeed |
20:51.02 | balder | :D can i ring from new Android ? :D |
20:51.11 | mdrobnak | Not yet. |
20:51.12 | NetRipper | no |
20:51.34 | balder | :( |
20:51.41 | NetRipper | what does work is: display works, touchscreen works, that's about it |
20:52.41 | mdrobnak | dcordes: Yeah, I think that's my last attempt on that one.. |
20:53.04 | balder | any sms, internet option? |
20:53.46 | NetRipper | nope |
20:53.47 | NetRipper | not yet |
20:53.50 | NetRipper | it's not usable yet |
20:54.47 | balder | lot's of people waiting for finnale androit |
20:54.51 | NetRipper | yes |
20:54.58 | NetRipper | lots of work to be done before that happens as well :) |
20:55.59 | balder | so Keep up to good work |
20:56.05 | balder | :) |
20:56.21 | NetRipper | we will |
20:56.30 | NetRipper | we want it working as much as you do :) |
20:56.53 | NetRipper | more tea more tea, bbl |
21:01.26 | dcordes | frameworkdc an handle text messages nicely |
21:03.11 | *** join/#htc-linux sietse (n=sietse@vogons.xs4all.nl) |
21:05.33 | mdrobnak | sorry was away for a few minutes.. |
21:05.50 | mdrobnak | dcordes: so where is frameworkd used right now? |
21:08.28 | *** join/#htc-linux Camvoya (i=Camvoya@2.Red-88-27-194.staticIP.rima-tde.net) |
21:09.45 | *** join/#htc-linux thejigsaw (n=thejigsa@77.29.64.199) |
21:14.53 | toer | mdrobnak: on the openmoko devices |
21:17.58 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffcfc.pool.einsundeins.de) |
21:21.29 | lavender-t | hi balsat i tried smd0 and the dialer didnt crash |
21:21.59 | balsat | Great... can you make a call? |
21:23.16 | lavender-t | yes i can |
21:24.23 | *** join/#htc-linux netrippe1 (n=netrippe@netripper.com) |
21:24.24 | balsat | Great.... but strange it crashes when i trye! |
21:24.49 | lavender-t | yeah .. i kinda wonder if your images were corrupted |
21:25.18 | lavender-t | i built a cupcake. from the forum i think you are using that too. right ? |
21:25.37 | balsat | I have installed jobo's image, and the same thing happens |
21:25.57 | lavender-t | i mean the /system /data fs |
21:27.01 | balsat | yes it is a cupcake build |
21:27.04 | lavender-t | i just uploaded mine (the loopback image files) to http://xda.willboost.com/cupcake-20090103-2.tar.gz |
21:27.19 | balsat | i'il give it a trye |
21:27.23 | *** join/#htc-linux LanceHaig (n=lanceh@78-105-106-238.zone3.bethere.co.uk) |
21:39.43 | *** part/#htc-linux LanceHaig (n=lanceh@foresight/member/lhaig) |
21:42.09 | mdrobnak | Nice to come back to a fresh image file for Android :-) |
21:43.56 | *** join/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
21:44.03 | *** part/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
21:44.19 | *** join/#htc-linux reformatt (n=chatzill@97-121-31-187.bois.qwest.net) |
21:44.21 | balsat | lavender.t : Bingo... no crash, but the call dont get true |
21:44.34 | *** join/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
21:44.52 | *** join/#htc-linux LanceHaig (n=lanceh@foresight/member/lhaig) |
21:45.25 | lavender-t | oh ? |
21:46.05 | lavender-t | you cant place the call or answer it ? |
21:46.15 | balsat | the call end when i press the call button |
21:47.40 | mdrobnak | balsat:Any error messages this time? |
21:47.56 | balsat | no errors |
21:49.50 | mdrobnak | It just closes the dialer? |
21:50.17 | mdrobnak | and the call button on the screen, or the button on the phone itself? |
21:50.29 | dcordes | lavender-t does your vogue clock workaround work for the raphael mmc controller as well? |
21:50.46 | mdrobnak | dcordes: Yes. :-) |
21:51.00 | mdrobnak | (I'm using the RAPH110) |
21:51.10 | balsat | The call button on the screen |
21:51.24 | reformatt | just a quick question not sure if it has been answered yet or not. Has anybody found out how to fix the colors on anderoid when running a cdma diamond? |
21:51.30 | dcordes | so you can axx sd on your raph110 with it? |
21:51.52 | mdrobnak | dcordes: Yes. That's how Android 1.0 works at all - it's loopback ext2 images off the SD |
21:52.39 | lavender-t | dcordes: yes, except for maejrep's raph800 |
21:52.57 | balsat | when i call the diamond, i get the voicemail ;>( |
21:53.27 | mdrobnak | The 800 has to be a bit different it seems.. |
21:53.30 | lavender-t | balsat: yes me too. but i saw the call logs. |
21:53.44 | balsat | but i can see the call in "call log" |
21:53.48 | lavender-t | so i think it was just the dialer UI didnt pop up. |
21:54.18 | mdrobnak | I'm downloading the cupcake build now, thanks for that lavender-t.. |
21:55.19 | lavender-t | mdrobnak: dont mention it. that was easy. you figured out the hard part :) |
21:55.54 | lavender-t | ok time for lunch now ... |
21:56.06 | mdrobnak | heh, thanks |
21:56.14 | mdrobnak | ttyl |
21:58.29 | *** part/#htc-linux LanceHaig (n=lanceh@foresight/member/lhaig) |
21:59.12 | dcordes | mdrobnak can you try bootng the rootfs from sd? |
21:59.35 | mdrobnak | well, I like not having to mess with partitioning the sd card at the moment |
21:59.45 | mdrobnak | but others have done that I think |
21:59.57 | mdrobnak | at some point I can |
22:00.06 | dcordes | you have no spare one? |
22:00.06 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
22:01.40 | mdrobnak | Nah, one went up in a pile of smoke, mysteriously, after putting it in blackberry. :-( |
22:01.55 | mdrobnak | (not really, but it just stopped working) |
22:02.11 | dcordes | I have a similar sd |
22:02.23 | dcordes | itd idn't smoke but it's a resistor now |
22:02.30 | dcordes | produces a lot of heat |
22:03.08 | balsat | I just recived a SMS on Android (Diamond) |
22:03.26 | mdrobnak | balsat: really?! |
22:03.26 | balsat | But i cant send one |
22:03.27 | mdrobnak | cool |
22:09.51 | *** join/#htc-linux NetRipper (n=netrippe@netripper.nl) |
22:10.34 | reformatt | do the cupcake files need to be extracted to an ext2 partition or are these the .img files that you put in a tmp folder? I want to try them out on my DIA500 |
22:11.01 | mdrobnak | it's a tar with img files in it |
22:11.05 | reformatt | ok |
22:11.51 | reformatt | do you know what has been updated in the cupcake release compaired to the release a few days ago? sorry I have not kept up on here and the wiki doesn't say anything new |
22:12.36 | mdrobnak | reformatt: thats because lavender-t just put together the cupcake one ;-) |
22:12.47 | reformatt | hehe gotcha I figured that was the case |
22:13.03 | *** part/#htc-linux balder (n=balder@h134-54.net.euron.pl) |
22:13.28 | mdrobnak | NetRipper: I'm having trouble booting stuff now it seems |
22:13.40 | NetRipper | getting it to boot at all? |
22:13.41 | mdrobnak | I can't boot this cupcake stuff either |
22:13.53 | mdrobnak | same thing, hangs at "console handover:..." |
22:14.13 | NetRipper | usb at activesync? |
22:14.30 | mdrobnak | Yeah |
22:14.36 | mdrobnak | It's really odd. |
22:14.45 | NetRipper | you changed your default.txt, didnt you? |
22:14.47 | mdrobnak | I'm re-downloading the original diamond tar file put up on the wiki |
22:14.49 | mdrobnak | yesa |
22:14.53 | mdrobnak | a few times |
22:14.58 | NetRipper | maybe an error in there |
22:15.01 | mdrobnak | I think I may have gotten it into a yucky state |
22:15.02 | mdrobnak | ya |
22:15.04 | NetRipper | ah |
22:15.07 | NetRipper | you had the fuze right |
22:15.11 | mdrobnak | yep |
22:15.15 | NetRipper | remove the set ramaddr line |
22:15.17 | NetRipper | uncomment it |
22:15.30 | NetRipper | and make it mem=92M instead of 96 |
22:15.41 | mdrobnak | the one I have says mem=64 |
22:15.47 | NetRipper | that's not enough for android |
22:15.52 | NetRipper | but ok should boot kernel |
22:15.53 | NetRipper | but |
22:15.54 | mdrobnak | It worked before ;-) |
22:15.59 | NetRipper | still, uncomment the ramaddr line |
22:16.05 | mdrobnak | k, rebooting |
22:16.09 | *** join/#htc-linux goxboxlive (n=goxboxli@24.84-48-212.nextgentel.com) |
22:16.43 | NetRipper | perhaps also ramsize, haret should calculate it |
22:17.08 | NetRipper | nah leave ramsize |
22:17.17 | NetRipper | ramaddr should be 0x1* |
22:17.26 | NetRipper | or well |
22:17.35 | NetRipper | hm |
22:17.37 | NetRipper | before you boot |
22:17.40 | NetRipper | tell me what ramaddr is set to ;) |
22:18.10 | mdrobnak | set ramaddr 0x10000000 |
22:19.07 | mdrobnak | ok, that didn't work. I took out the msmts_calib part of the cmdline |
22:19.16 | mdrobnak | but left everything else the same |
22:19.27 | mdrobnak | I'll try changing the mem= to 96 |
22:21.09 | netrippe1 | ah ok |
22:21.10 | netrippe1 | but |
22:21.19 | netrippe1 | try ramaddr 0x2* then |
22:21.24 | netrippe1 | it is what i use |
22:21.48 | mdrobnak | ^^ two differnt machines ? lol |
22:21.53 | netrippe1 | or did fuze have less memory? |
22:21.58 | netrippe1 | than raph100 |
22:22.00 | mdrobnak | no, fuze is same as touch pro |
22:22.25 | netrippe1 | nah the second memory module is located at 0x10000000 |
22:22.27 | netrippe1 | uh |
22:22.29 | netrippe1 | nah the second memory module is located at 0x20000000 |
22:22.31 | netrippe1 | i mean |
22:23.02 | netrippe1 | i get weird stuff in windows mobile when i use 0x1* for linux |
22:23.03 | netrippe1 | dont know why |
22:23.03 | mdrobnak | (I meant the two different handles) |
22:23.17 | netrippe1 | eh |
22:23.24 | netrippe1 | raph100 vs raph110 you mean? |
22:23.33 | mdrobnak | nevermind |
22:23.34 | NetRipper | am i here? |
22:23.38 | netrippe1 | ah |
22:23.43 | mdrobnak | that's what I meant |
22:23.49 | mdrobnak | NetRipper & netrippe1? |
22:23.50 | netrippe1 | ohlol |
22:23.51 | netrippe1 | yes |
22:24.00 | netrippe1 | my linux server was hacked |
22:24.05 | netrippe1 | so i had to do some stuff |
22:24.09 | netrippe1 | and i didnt want to miss something here |
22:24.12 | netrippe1 | so i joined a clone |
22:24.20 | mdrobnak | hehe |
22:24.29 | mdrobnak | sorry to hear about your server.. |
22:24.35 | netrippe1 | and i just changed my network card from eth2 to eth0, so it's a miracle im still connected |
22:24.38 | netrippe1 | :) |
22:24.38 | mdrobnak | Gotta keep packages upt to date :-) |
22:24.45 | mdrobnak | LOL nice |
22:24.46 | netrippe1 | yer yer, rubb it in ;) |
22:24.53 | mdrobnak | I'm a sysamdin |
22:25.01 | netrippe1 | i didnt want to reboot |
22:25.15 | netrippe1 | it's a pain in the ass ;) |
22:25.19 | mdrobnak | Uptime is for crazy people ;-) |
22:25.26 | netrippe1 | yes, true |
22:25.31 | netrippe1 | but that was not my reason |
22:25.45 | netrippe1 | when i reboot i have to start like 20 services again manually |
22:25.49 | netrippe1 | within screens etc |
22:26.38 | mdrobnak | Ah, I can see how that can be a pain. |
22:26.43 | mdrobnak | Ramsize = 0x20.... |
22:26.48 | netrippe1 | ok |
22:26.48 | mdrobnak | = nothing after Go Go Go |
22:26.52 | netrippe1 | pff |
22:26.54 | netrippe1 | eh? |
22:27.01 | netrippe1 | oh the winmo go go go |
22:27.20 | netrippe1 | lol not even handover? |
22:27.21 | netrippe1 | ;) |
22:27.30 | mdrobnak | nop[e |
22:27.39 | netrippe1 | unlucky |
22:28.18 | mdrobnak | I'm going to put it all back to a known-good state - the diam tarball that lavender-t put together |
22:28.33 | netrippe1 | yea |
22:28.54 | mdrobnak | The only thing I did when I got that was remove the calibration part of the command line so I could manually calibrate.. |
22:29.02 | netrippe1 | lavender-t, were you going to commit your patch? or do you want me to look into that? |
22:33.56 | mdrobnak | boot vs bootlinux any diff to haret? |
22:34.48 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbffd2f.pool.einsundeins.de) |
22:35.54 | *** part/#htc-linux gentooboontoo (n=julien@mne69-9-88-163-117-98.fbx.proxad.net) |
22:38.32 | mdrobnak | I think it was time for a hard reset |
22:41.25 | NetRipper | no |
22:41.30 | NetRipper | boot and bootlinux is the same |
22:42.20 | *** join/#htc-linux MethoS- (n=clemens@host-091-097-240-179.ewe-ip-backbone.de) |
22:42.49 | reformatt | what phone is this cupcake release for? does it work on the diam500? I just tried it and the colors are even more messed up then the release a few days ago |
22:45.25 | reformatt | I am just curious I know this whole project is a WIP. I am one of the unlucky people who has the sprint version with the color issue |
22:46.22 | mdrobnak | reformatt: The distro was put togher by someone who has a DIAM110. |
22:47.09 | reformatt | I see |
22:47.51 | reformatt | thank you for the info :) |
22:48.46 | mdrobnak | np |
22:48.58 | mdrobnak | NetRipper: Ok, Angstrom boots. |
22:49.20 | mdrobnak | Cupcake, does not. |
22:49.42 | mdrobnak | And wow does the phone boot faster. |
22:49.52 | mdrobnak | (WinMo) |
22:49.55 | NetRipper | faster? |
22:50.06 | mdrobnak | Yeah, I did a hard reset |
22:50.06 | NetRipper | you flashed another rom? |
22:50.09 | NetRipper | oh |
22:50.10 | mdrobnak | and it loads faster |
22:50.21 | NetRipper | until you install your usual stuff ;p |
22:50.25 | mdrobnak | POS Windows on all platforms ;) |
22:50.28 | mdrobnak | I don't though! |
22:50.33 | mdrobnak | I just had my email and putty |
22:51.01 | NetRipper | reminds me |
22:51.09 | NetRipper | should flash my winmo |
22:51.15 | NetRipper | this elite rc2 is bugging me |
22:51.31 | NetRipper | 50% chance when soft-resetting if it'll hang or actually continue booting |
22:51.51 | NetRipper | known bug, and they said they'll release rc3 which fixes it "any day now |
22:51.56 | NetRipper | they said that 3 weeks ago |
22:52.20 | mdrobnak | yeah |
22:52.32 | mdrobnak | I held off on flashing for that reason |
22:52.33 | mdrobnak | :-) |
22:53.00 | NetRipper | think im going to check out another rom |
22:53.44 | mdrobnak | Ok, Android 1.0 running again, non Cupcake build. |
22:53.57 | mdrobnak | Next is cupcake build. |
22:54.15 | NetRipper | :) |
22:55.16 | mdrobnak | Nice, got a text message too |
23:05.40 | mdrobnak | Here's something different.. |
23:06.04 | mdrobnak | I get a "WARNING - Bad VDD (0 != 7) for this freq" |
23:06.17 | mdrobnak | Right before the CPU0: lines |
23:08.32 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
23:12.01 | parmaster | cupcake looks good on the vogue |
23:14.31 | mdrobnak | NetRipper: Ok, it's DEFINITELY the initrds that screw it up |
23:14.49 | mdrobnak | I modified my initrd slightly to run the /init.andriod at the end automatically |
23:14.53 | mdrobnak | and it didn't like it |
23:14.56 | mdrobnak | not sure why |
23:15.01 | NetRipper | so |
23:15.07 | NetRipper | after you change initrd, it doesn't get passed handover? |
23:15.37 | mdrobnak | exactly |
23:15.41 | NetRipper | strange |
23:15.52 | NetRipper | driver should be inited before initrd gets a chance |
23:16.01 | mdrobnak | apparently not :-) |
23:19.24 | kimhoon | On the diamond it is possible to send a sms (cupcake) |
23:20.50 | *** join/#htc-linux MethoS-- (n=clemens@host-091-097-240-179.ewe-ip-backbone.de) |
23:23.39 | kimhoon | hmm sorry on htc diamond with android 1 cupcake i can receive and send sms :) |
23:24.07 | NetRipper | send as well? |
23:25.28 | kimhoon | yup :) |
23:26.38 | kimhoon | tested it twice |
23:27.21 | NetRipper | nice |
23:28.02 | kimhoon | is it possible to go back to the homescreen ?? on a diamond? |
23:32.29 | NetRipper | nope |
23:32.32 | NetRipper | neither on raph |
23:32.40 | NetRipper | someone should write a driver for the keypad |
23:35.47 | kimhoon | and i can call but no sound and mic |
23:36.05 | NetRipper | yea we need sound and mic drivers too ;) |
23:44.49 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
23:54.03 | miknix | hello all |
23:54.12 | miknix | hey BabelO how are you? |
23:54.23 | BabelO | ola miknix |
23:54.25 | BabelO | fine ! |
23:54.39 | BabelO | do you read the logs ? |
23:54.59 | miknix | git? |
23:55.17 | BabelO | no |
23:55.45 | miknix | ah, let me rollback the irc log then |
23:55.55 | BabelO | miknix: https://opensource.motorola.com/sf/frs/do/viewRelease/projects.a810/frs.a810.gsm_e28_24_1_g_11_02_21r?_pagenum=2 |
23:56.02 | BabelO | miknix: download this kernel :) |
23:56.19 | BabelO | miknix: you will find sound and gsm driver for omap730 / 850 |
23:56.30 | BabelO | miknix: it is 2.4 |
23:56.49 | miknix | "exception13: the csmi_tty driver is what we miss for proper gsm use :)" |
23:56.54 | BabelO | miknix: i ve done the port for the FM radio chipset i ve in artemis |
23:57.06 | miknix | holly crap |
23:57.06 | BabelO | miknix: yes that's it :) |
23:57.10 | miknix | are you serious? |
23:57.23 | BabelO | miknix: yes |
23:57.54 | BabelO | miknix: i m doing the tips for csmi driver to 2.6, but i still have some error at compile time |
23:58.40 | miknix | do you have a patch? I don't feel like downloading the entire tree |
23:59.09 | miknix | or, is ii on git? |
23:59.11 | miknix | *it |
23:59.47 | BabelO | roh |
23:59.47 | BabelO | no not on git and no patch |
23:59.47 | miknix | : O |
23:59.47 | BabelO | it still not compile |
23:59.47 | BabelO | download the tarball :) |