00:22.59 | *** join/#htc-linux datachaos (n=datachao@189.27.179.105.adsl.gvt.net.br) |
00:33.25 | *** join/#htc-linux madCoder- (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
01:05.45 | *** join/#htc-linux imfloflo (n=imfloflo@18.158.119-80.rev.gaoland.net) |
01:07.19 | *** join/#htc-linux lama (i=lama@netbsd.pl) |
01:16.36 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
01:27.02 | *** join/#htc-linux balsat1 (n=kll@87.72.13.87) |
02:06.33 | kvstrien | :( |
02:06.59 | kvstrien | finally integrated the supplied board.c files for nike, kernel compiles neatly, but doesn't boot :@ |
02:07.31 | tmzt | what mach type are you using? |
02:27.12 | kvstrien | mach_nike |
02:29.28 | kvstrien | nearly the same as mach_polaris - but got nike-ts.c, board-htcnike.c, board-nike-keypad.c and nike-pm.c |
02:30.57 | kvstrien | but 'm gonna get some sleep now :) (3:30 in the morning is quite late, even during holidays :P) |
02:31.15 | kvstrien | t'night tmzt |
02:31.17 | kvstrien | t=g |
02:31.56 | tmzt | arch/arm/tools/mach-types, add the NIKE |
02:32.14 | tmzt | make sure the machine init has that mach type |
02:32.15 | tmzt | ok |
02:32.46 | kvstrien | mach-types is updated already |
02:33.00 | kvstrien | can send you the files if you'd like to check 'm out..? |
02:35.58 | *** join/#htc-linux jati (n=jati@125.162.46.190) |
02:37.19 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
02:40.55 | madCoder- | ltg being slow :( |
03:08.29 | *** part/#htc-linux jati (n=jati@125.162.46.190) |
03:14.44 | *** part/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
03:16.01 | *** join/#htc-linux Moku (n=John@g227199011.adsl.alicedsl.de) |
03:30.08 | *** join/#htc-linux fnord_ (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
04:35.44 | *** join/#htc-linux arrrghhh (n=arrrghhh@71.237.112.11) |
04:35.55 | arrrghhh | tmzt, so now i'm home. |
04:36.00 | arrrghhh | tsdogs_, you still here too? |
04:36.19 | arrrghhh | i formatted the card in winblows xp. i was hoping to try this again... |
04:41.04 | tmzt | yeah |
04:41.30 | arrrghhh | so i formatted the card in windows... |
04:41.31 | lupine_85 | wonders whether to try android 1.0 on his raph100 |
04:42.07 | arrrghhh | is there anything i need to do from windows to setup the partition table now that i actually have a card reader :D |
04:42.49 | tmzt | start>run>diskmgmt.msc |
04:42.56 | tmzt | check the partition |
04:44.37 | *** join/#htc-linux ttbob__ (n=ttbob@xdsl-213-196-244-106.netcologne.de) |
04:44.50 | arrrghhh | tmzt, i formatted it from that utility... looks like android *may* actually be booting! |
04:44.50 | parmaster | i still haven't checked out the cupcake branch on my vogue yet |
04:45.12 | arrrghhh | oh wow |
04:45.19 | arrrghhh | it's booting... that's awesome. |
04:46.01 | arrrghhh | i just formatted it, dropped the stuff on there and ran haret lol. |
04:46.14 | parmaster | what phone? |
04:46.30 | arrrghhh | titan |
04:46.41 | arrrghhh | hrm. i wonder when they'll get the touch screen workin better. |
04:46.50 | *** join/#htc-linux fnord_ (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
04:47.40 | tmzt | arrrghhh: on titan, it should work if it's similar to vogue |
04:48.06 | tmzt | you mgiht have to press camera and calibrate it or something |
04:48.14 | arrrghhh | well they were having issues |
04:48.25 | arrrghhh | and i guess they turned the touch sensitivity wayyyyyyy down. |
04:48.35 | arrrghhh | wow |
04:48.45 | arrrghhh | it switches from portrait to landscape ridiculously fast. |
04:56.10 | parmaster | try pressing cammera while touching one of the display corners with the stylus |
04:57.30 | arrrghhh | it's actually aligned fairly well |
04:57.35 | arrrghhh | just have to press hard lol |
04:58.11 | arrrghhh | hrm locked up when i went to "power down" |
04:58.45 | arrrghhh | and there's still some work to be done, but now i can actually use it! sweet. and i ordered a new sd card today lol |
05:00.06 | arrrghhh | is there a terminal? can i do ssh? |
05:00.12 | arrrghhh | well i need to get internet working first... |
05:00.23 | arrrghhh | i had a cxn before running android. |
05:00.42 | parmaster | yeah there is a terminal |
05:00.48 | parmaster | in it just type su for root |
05:01.00 | arrrghhh | how do you get to the terminal? |
05:01.35 | parmaster | i can't remember it might be under the developer menu thing |
05:01.43 | parmaster | don't have my phone with me |
05:01.55 | arrrghhh | k |
05:02.13 | arrrghhh | ah that's so cool. seein tux on mah phone :D |
05:02.39 | arrrghhh | i think it's bedtime. g'nite all, thanks again for all your help tmzt. didn't have to do a whole lot this time haha! |
05:04.09 | lupine_85 | humm, no joy here |
05:20.14 | *** join/#htc-linux AstainAway (n=AstainHe@unaffiliated/astainhellbring) |
05:21.01 | AstainAway | hi hi |
05:49.31 | *** join/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
06:01.09 | *** join/#htc-linux dcordes_ (n=dcordes_@unaffiliated/dcordes) |
06:16.35 | dcordes_ | blah |
06:42.08 | *** join/#htc-linux maejrep (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
06:49.38 | *** part/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
07:20.56 | *** join/#htc-linux timebomb (n=tb@91.98.200.120) |
07:50.44 | *** join/#htc-linux synth (n=cb@obfuscated.us) |
07:51.00 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
07:54.43 | synth | are there datasheets available for the MSM7201A ? |
07:54.51 | synth | or any MSM7x00 |
08:00.27 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
08:10.18 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
08:11.23 | *** join/#htc-linux orkkaze_w (n=kaze@ABordeaux-152-1-52-189.w82-125.abo.wanadoo.fr) |
08:23.24 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
08:39.45 | *** join/#htc-linux Xime (n=xime@dag94-3-82-233-170-230.fbx.proxad.net) |
08:54.45 | *** join/#htc-linux lavender-t (n=jerrey@c-24-17-204-47.hsd1.wa.comcast.net) |
08:55.08 | lavender-t | happy new year folks ! |
08:55.38 | parmaster | hey, happy new year to you also |
08:59.46 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
09:50.52 | lavender-t | hi cr2, if you read this log, could you please check your private message in xda-developers ? thanks ! |
10:09.25 | *** join/#htc-linux Sparky_ (n=maik@77.20.236.81) |
10:14.42 | *** join/#htc-linux nebi_ (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
10:27.41 | *** join/#htc-linux kvstrien (n=kvstrien@ip12-124-210-87.adsl2.static.versatel.nl) |
10:30.56 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d7b7.pool.einsundeins.de) |
10:32.28 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-75-85-249-111.bak.res.rr.com) |
10:43.03 | *** join/#htc-linux goxboxlive (n=goxboxli@24.84-48-212.nextgentel.com) |
10:46.13 | *** join/#htc-linux zsircusr (n=mindk33p@195.167.65.123) |
10:47.19 | *** join/#htc-linux Tinyboom (n=nahh@108.84-49-166.nextgentel.com) |
10:50.27 | kvstrien | anyone who can help me set up HaRET console? |
10:50.46 | kvstrien | when I try to connect I get a "connection refused" error |
10:51.25 | kvstrien | though my device is listening and has got a network address.. |
11:10.55 | *** join/#htc-linux datachaos (n=datachao@201.21.206.79) |
11:23.24 | *** join/#htc-linux Untouchab1e (n=kvirc@cm-84.209.89.86.getinternet.no) |
11:23.33 | Untouchab1e | Hi all |
11:30.39 | kvstrien | hi |
11:32.03 | *** join/#htc-linux kimhoon (n=kimhoon@s559116c1.adsl.wanadoo.nl) |
11:35.38 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
11:36.12 | Untouchab1e | Anyone tried Lavenders image on a Raph100? |
11:36.24 | kimhoon | yup |
11:37.44 | kimhoon | and it works :) |
11:38.47 | kimhoon | but no gsm signal buttons doesn't works |
11:39.16 | Untouchab1e | cool |
11:39.22 | Untouchab1e | did you edit the default.txt in any way? |
11:39.50 | kimhoon | no maybe today :) |
11:40.34 | Untouchab1e | so you didnt need to edit it in order to run in on the Touch Pro? |
11:41.56 | kimhoon | wait raph100 ive got a diamond and raph on the diamond it works but raph don't know |
11:42.09 | kimhoon | going try it out today |
11:42.46 | Untouchab1e | what you mean "raph on the diamond"? lol |
11:43.30 | kimhoon | sorry on the diamond it works but on the raph i dont know |
11:43.53 | Untouchab1e | ok, then we agree.. hehe |
11:44.14 | ttbob__ | great news so far :) |
11:44.22 | Untouchab1e | what? |
11:44.43 | ttbob__ | that the lavenders image works ... |
11:44.58 | ttbob__ | at least on diamond |
11:46.25 | Sparky_ | @kvstrien: hi |
11:46.31 | Sparky_ | are you there? |
11:46.54 | kvstrien | yupe |
11:46.58 | Sparky_ | hello |
11:47.05 | kvstrien | hi again :) |
11:47.08 | Untouchab1e | hi |
11:47.18 | Sparky_ | got android running with the expected errors |
11:47.21 | Untouchab1e | yeah, Lavenders work is great! However, there is still much more to do |
11:47.33 | Untouchab1e | Sparky, on the diamond on raph? |
11:47.54 | Sparky_ | also managed to create a usb0 device to connect to the phone |
11:47.59 | kvstrien | great :) |
11:48.09 | kvstrien | got ssh up? |
11:48.10 | Sparky_ | but i only have the android image, so there is no ssh deamon :( |
11:48.25 | kvstrien | k, but you can easily add in another initrd |
11:48.31 | Sparky_ | the link for the angstrom image is the same like the andorid :( |
11:48.36 | kvstrien | ?? |
11:48.45 | Sparky_ | the both links are the same :( |
11:49.18 | Sparky_ | but i found this: http://www.youtube.com/watch?v=aBXdi4wJQl8 |
11:49.18 | kvstrien | http://linuxtogo.org/~lgorris/kaiser-bootkit/angstrom-20081127.cpio.gz |
11:49.24 | Sparky_ | thx |
11:49.27 | Sparky_ | i will give it a try |
11:49.31 | kvstrien | rename it to initrd of course :) |
11:49.35 | Sparky_ | xrd |
11:49.37 | Sparky_ | yes |
11:50.23 | Sparky_ | @Untouchab1e: no, i am on a touch hd |
11:50.29 | Sparky_ | :( |
11:50.30 | kvstrien | hm nice vid :) |
11:50.42 | kvstrien | somewhat slow but hey, it's running there! :) |
11:50.49 | Sparky_ | it works, but there are no details :( |
11:51.19 | Sparky_ | i sent a message to him, i hope he will answer |
11:52.26 | Sparky_ | so i have to go to the store, cu later |
11:52.38 | kvstrien | later |
12:18.23 | *** join/#htc-linux ttbob (n=ttbob@xdsl-81-173-231-147.netcologne.de) |
12:22.09 | Sparky_ | re |
12:45.52 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
12:46.22 | Sparky_ | damn android allways crashes to a black screen :( |
12:53.28 | Sparky_ | with activsync enabled it won't boot :( |
12:57.11 | Sparky_ | okay, got no luck, now its lunch time, bye |
13:36.52 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
13:40.08 | kvstrien | can anyone tell me some more about gpio's? |
13:40.58 | kvstrien | I know what gpio's do, how they're triggered etc.. But on my Niki there are several keys that trigger the same bit |
13:42.00 | kvstrien | it looks like the keys are split in several blocks, and on a trigger the OS checks which key it is |
13:42.37 | *** join/#htc-linux Untouchab1e (n=kvirc@cm-84.209.89.86.getinternet.no) |
13:42.45 | kvstrien | but if two keys (for example 1 and 2, or red and green) trigger the same bit AND the same IRQ, how can I check which key is pressed? |
13:43.23 | BabelO_ | kvstrien: it is a matrix, you have two gpio for row and you miss the others for column |
13:43.56 | kvstrien | ok |
13:44.09 | kvstrien | but there's one gpio that I can't see or ..? |
13:45.10 | kvstrien | because with HaRET console I see only one bit being triggered |
13:49.03 | kvstrien | BabelO_ do you know that? |
13:50.27 | BabelO_ | kvstrien: there is many solution for keypad, you have i2c / spi / multiplexed row/column |
13:50.56 | kvstrien | true, but still the OS needs to read it out - so it should be a readable value |
13:51.08 | kvstrien | at the old ps-2 protocol there was a scanning line, and depending on when the "key pressed" signal came in you knew which key it was |
13:51.21 | kvstrien | but I think that's not a very power-saving way for a phone :) |
13:51.27 | BabelO_ | with the row/column the uC switch quickly column from 0 to 1 one by one and when you press button you power up a row so you know where you are |
13:51.37 | BabelO_ | and haret can't monitor this quickly swiotched bits |
13:51.41 | kvstrien | k |
13:52.03 | lupine_85 | kvstrien: which device are you playing with? |
13:52.06 | kvstrien | niki |
13:52.08 | BabelO_ | i think it is that way on your phone |
13:52.17 | lupine_85 | okidoki |
13:52.23 | BabelO_ | kvstrien: else check the spi or i2c data adress |
13:52.30 | lupine_85 | has been bashing away at the raph100 keyboard |
13:52.40 | lupine_85 | grrthing is grr |
13:52.44 | BabelO_ | because sometimes they just power on the chip that managed keyboard on demand |
13:53.02 | BabelO_ | so it can be that too |
13:53.47 | BabelO_ | kvstrien: you have to look with haret which register is moving, for that use trace function |
13:54.00 | kvstrien | ok thanks :) |
13:54.23 | kvstrien | trace? |
13:54.53 | kvstrien | mmutrace :) |
14:10.42 | BabelO_ | kvstrien: look at haret page, there is a sample how to use trace register |
14:11.22 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d7b7.pool.einsundeins.de) |
14:12.40 | kvstrien | BabelO_: I'm there all day ;).. but is trace register the same as tracing mmu registers? |
14:14.19 | kvstrien | w8 I see it - the help vars function clears up a lot |
14:15.49 | BabelO_ | kvstrien: no it is a ring buffer, it does not monitor event like mmutrace does |
14:18.30 | kvstrien | BabelO_: ok, so wirq will then not probe the addresses, but read out the ring buffer..? |
14:18.57 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
14:19.50 | BabelO_ | kvstrien: you have to tell trace what adress to look then use wi or something like that, see the wiki |
14:21.23 | kvstrien | ok, but that's basically the same as mmutrace, except the ringbuffer part |
14:22.13 | BabelO_ | http://www.handhelds.org/moin/moin.cgi/HaRET_20Documentation |
14:22.19 | BabelO_ | addlist TRACES |
14:22.22 | BabelO_ | that the command |
14:22.25 | kvstrien | yes read that :) |
14:23.49 | BabelO_ | it works well but you have to specify a short list to watch |
14:24.01 | BabelO_ | on my artemis i can't do more than 4 adress |
14:25.07 | kvstrien | hm, when I clearlist TRACES, then addlist TRACES p2v(0x4c000000) and then wirq 10 my device turns off :S |
14:25.21 | kvstrien | think that was not the right address :P |
14:25.34 | kvstrien | but how do I know which address to watch? |
14:29.07 | BabelO_ | some address do that, look into include/asm/arch of your current kernel |
14:29.29 | BabelO_ | there is a msm.h or something like that with physical adress of each register |
14:33.49 | *** join/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
14:34.39 | exception13 | BabelO: hi |
14:35.46 | *** join/#htc-linux drasar (n=maik@213.192.22.2) |
15:15.05 | *** join/#htc-linux AstainAway (n=AstainHe@unaffiliated/astainhellbring) |
15:18.52 | AstainAway | morning |
15:20.47 | exception13 | We have already evening:) |
15:47.59 | *** join/#htc-linux arrrghhh (i=cdf317ba@gateway/web/ajax/mibbit.com/x-8436576a20c22164) |
15:48.15 | arrrghhh | so... how do i get the internet to work in android? |
15:48.33 | arrrghhh | everyone says just establish a cxn in winmo and it'll carry over... it doesn't seem to. |
15:54.42 | *** join/#htc-linux apt (i=ibot@rikers.org) |
15:54.42 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
16:08.43 | dcordes | hi everybody and happy new year |
16:08.50 | arrrghhh | indeed |
16:09.17 | kiozen | dcordes you are too early and too late :P |
16:09.29 | arrrghhh | haha |
16:09.38 | dcordes | how would I be too late :) ? |
16:09.57 | arrrghhh | i'm sure some people have already celebrated and are in 2009 :P |
16:10.03 | dcordes | yea |
16:10.54 | arrrghhh | so dcordes, what device are you using android on? |
16:11.16 | dcordes | none |
16:11.31 | dcordes | I only use msm kernel on kaiser |
16:12.47 | dcordes | fear I can't help you with android networking |
16:15.08 | AstainAway | lupine_85 how goes the fight with the keyboard? |
16:18.09 | dcordes | AstainAway: raph one? |
16:18.45 | AstainAway | yes dcordes |
16:19.03 | dcordes | that's nice. tmzt proposed to unify msm keyboards |
16:19.13 | dcordes | I share this opinion |
16:19.31 | arrrghhh | aw |
16:19.34 | arrrghhh | yea i don't see anything with the ifconfig command |
16:19.34 | arrrghhh | i'm not sure how else to get a cxn. |
16:21.25 | AstainAway | dcordes unify them? |
16:21.40 | dcordes | arrrghhh: what device and android image do you have? |
16:21.47 | arrrghhh | titan |
16:21.53 | dcordes | AstainAway: yea make one unified keypad file for all of the msm machines. |
16:21.56 | arrrghhh | and i'm not sure how to answer that last question... 1.0? |
16:22.31 | AstainHellbring | arrrghhh which android files you using? |
16:22.45 | dcordes | arrrghhh: yea that. like where did you download it? are you aware titan is the same board as vogue? I would check the xda forum on vogue android and read dzo's documentation |
16:22.45 | arrrghhh | i got them from xda-dev link |
16:23.06 | arrrghhh | http://magister.ipsys.net/projects/android-for-titan/ - from there |
16:23.26 | arrrghhh | dzo made docs? i parused thru the vogue stuff a month or so ago. |
16:23.41 | arrrghhh | http://forum.xda-developers.com/showthread.php?t=341903 - that's the titan/linux WIP page. |
16:23.45 | AstainHellbring | arrrghhh there is an app you need to run in that to start data |
16:23.47 | dcordes | that'd be the same images as dzo use |
16:24.11 | arrrghhh | oh yea? what's that. |
16:24.21 | arrrghhh | Togga? |
16:24.28 | dcordes | arrrghhh: do you define apn username password in CMDLINE? |
16:24.36 | dcordes | http://cs-alb-pc3.massey.ac.nz/vogue/ |
16:24.49 | arrrghhh | well |
16:24.52 | arrrghhh | the problem is i use sprint |
16:24.57 | arrrghhh | no username or password (as i understand it.) |
16:25.13 | dcordes | define it anyway |
16:25.16 | AstainHellbring | yes arrrghhh toggle I believe |
16:25.26 | AstainHellbring | dcordes in the one he is running that is not needed |
16:27.10 | tmzt | arrrghhh: there is a user/pw for sprint, but you have to find it in the wm |
16:27.20 | tmzt | vzw is easy, just vzw/vzw works |
16:29.29 | arrrghhh | well |
16:29.36 | arrrghhh | in wm i don't enter a username/pw |
16:29.37 | arrrghhh | i know i don't |
16:29.53 | arrrghhh | it just dials #777 and authenticates based on the esn or something... |
16:29.58 | dcordes | you don't know if wm sets a username/pw for you |
16:30.21 | arrrghhh | well i've resetup my evdo cxn several times |
16:30.24 | dcordes | maybe it's hardcoded in your rom |
16:30.27 | arrrghhh | i've never entered any info in there |
16:30.34 | arrrghhh | i've reimaged several phones too. |
16:31.19 | AstainHellbring | arrrghhh run the togga app on your titan |
16:31.32 | tmzt | if it authenticates based on the key I think you have to switch off mobile ip |
16:31.50 | BabelO | hi exception13 :) |
16:31.57 | tmzt | not esn, evdo is seperate |
16:35.22 | BabelO | what to do now ? |
16:35.26 | BabelO | http://www.fbi.gov/page2/dec08/code_122908.html |
16:37.08 | arrrghhh | AstainHellbring: i actually tried that, just fooling around with the apps available. is there a way to configure it? it's not connecting. |
16:38.32 | dcordes | BabelO: I will succeed right to the kid's page |
16:38.44 | AstainHellbring | not sure arrrghhh I dont have a titan anymore but when I did I just ran that app did a few things in it and it worked |
16:39.05 | tmzt | AstainHellbring: on sprint? |
16:40.18 | tmzt | arrrghhh: I think those values are in nvitems on the radio so the would survive a flash |
16:40.24 | tmzt | arrrghhh: but ask in #xda-dev |
16:40.44 | AstainHellbring | yes tmzt on sprint |
16:41.24 | tmzt | how did you login then, you didn't configure anything? |
16:41.53 | AstainHellbring | the togga app did everything I needed for me |
16:42.09 | tmzt | did you have simple ip enabled? |
16:42.42 | AstainHellbring | not 100% sure I was running the stock rom though with little modifications on it |
16:45.53 | AstainHellbring | brb |
16:48.28 | arrrghhh | what's simple ip? is that something in winmo? |
16:48.49 | arrrghhh | it's just that i've had multiple phones with sprint, and i know i've reconfigured the data cxn, and all it needs is dial #777... |
16:49.12 | tmzt | mobile ip is the new way of accessing the internet that sprint but not verizon uses, simple ip is disabling mobile ip |
16:49.28 | tmzt | my understanding of it is simple ip uses ppp sessions and chap authentication |
16:49.39 | arrrghhh | ah |
16:49.40 | tmzt | I'm not clear on what mobile ip is |
16:49.48 | arrrghhh | yea i would say i would need simple IP. |
16:49.55 | arrrghhh | i used to have an apache, the titan is kinda new to me. |
16:50.47 | arrrghhh | it's just there's no settings in togga. just connect and check status, i don't see how to configure it. |
16:51.41 | tmzt | arrrghhh: I believe you need to access a settings menu on the phone from wm and that the username password and mip setting is in nvitems which is stored in the radio |
16:51.59 | tmzt | the instructions should be howardforums |
16:57.39 | arrrghhh | hrm |
17:00.27 | arrrghhh | do you know where? lol |
17:00.36 | arrrghhh | this is some uncharted territory for me. |
17:01.24 | tmzt | sprint users forum, pda phones or sprintusers.com |
17:01.46 | tmzt | or search for mogul and ppp |
17:05.44 | arrrghhh | ok |
17:13.50 | arrrghhh | so what about contacts? is there a way in android to sync those? |
17:14.15 | tmzt | only through gmail so far |
17:14.23 | arrrghhh | well that works |
17:14.30 | tmzt | they might be in a sqlite database but I haven't seen anyone decode it |
17:14.34 | arrrghhh | hrm |
17:14.40 | arrrghhh | well i guess w/o internet i'm hosed |
17:14.42 | tmzt | you can import cvs (from outlook) into gmail |
17:18.43 | arrrghhh | yes, that's what i would do |
17:18.48 | arrrghhh | but since android can't see the 'net |
17:20.43 | arrrghhh | how do you set that up ? in contacts i can't even add a contact. just says the "My Contacts" group is empty. |
17:28.03 | arrrghhh | is there a way to reboot it? or do i just soft-reset |
17:32.05 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
17:34.55 | arrrghhh | yea, i just went thru the settings in wm... nothing for user or pass. |
17:35.11 | arrrghhh | so maybe there's some different way to authenticate if you're using ppp? |
17:44.48 | tmzt | arrrghhh: there is a phone number you have to type at the dial screen |
17:44.57 | tmzt | arrrghhh: that's what I mean by settings |
18:06.00 | arrrghhh | uhm... |
18:18.05 | arrrghhh | hrm. |
18:18.10 | arrrghhh | i don't know what you mean, sorry tmzt |
18:21.45 | AstainHellbring | hmm that diamond stuff for android works ok with lordkiwi's mods on it |
19:15.56 | *** join/#htc-linux Igorek (n=igorek@87.69.138.115) |
19:26.38 | *** join/#htc-linux timebomb (n=tb@91.98.200.120) |
19:41.01 | tmzt | arrrghhh: http://forum.ppcgeeks.com/showthread.php?p=454411 |
19:41.30 | arrrghhh | i got online! |
19:42.24 | RZK333 | compile irc client xD |
19:46.41 | RZK333 | how many chances we got on wifi working on Niki, if we will make android work fully? i mean, write/port a driver for qualcomm wifi block. qualcomm processor includes gps and wifi. |
19:51.46 | tmzt | I believe we need to make the g1 driver work and find some way to load the eeprom data from flash |
19:52.04 | tmzt | also, the sdio has to work first including the mscc clocks |
20:02.01 | RZK333 | htc dream has no wifi drivers yet? |
20:02.59 | arrrghhh | so i'd really like to help with this project |
20:03.06 | *** join/#htc-linux digerpaji (n=asad@ppp-70-245-79-119.dsl.hstntx.swbell.net) |
20:03.15 | arrrghhh | i'm pretty good with software, not an excellent programmer but i know a few things |
20:03.20 | arrrghhh | hardware, i would not be so good at |
20:03.33 | arrrghhh | where should i start? seems like the keyboard is mapped pretty well already. |
20:03.43 | arrrghhh | how about resizing everything? |
20:03.54 | arrrghhh | so it fits better on our qvga screens? |
20:08.07 | tmzt | RZK333: dream (g1) does, but the sdio depends on an RPC/proc_comm implementation in the AMSS (radio) that is different on wm htcs |
20:08.21 | tmzt | arrrghhh: what project? |
20:17.50 | arrrghhh | android for the titan |
20:17.58 | arrrghhh | i think the vogue has the same screen tho |
20:18.21 | arrrghhh | i think the g1 is like hvga or something different from our qvga screens, so everything just looks kinda scrunched. |
20:30.43 | *** part/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
20:36.30 | arrrghhh | i'd just like to start digging into this, so i can perhaps understand how it works better. |
20:41.26 | *** join/#htc-linux lpotter (n=lpotter@58.173.176.153) |
21:02.18 | RZK333 | happy new year from gmt+3 ) |
21:32.39 | *** join/#htc-linux ali1234 (n=al@robotfuzz.co.uk) |
21:51.14 | maejrep | 01f087b0 | 778a156f 00000000 feedbeef 00000000 | o..w............ |
21:51.16 | maejrep | heh |
21:51.37 | maejrep | looks like a developer got board :p |
21:51.43 | maejrep | (its repeated several times) |
21:52.16 | maejrep | 01f0b480 | 00000000 00000000 4f425355 00004754 | ........USBOTG.. |
21:52.16 | maejrep | 01f0b490 | 4b4c4300 49474552 4448004d 43454452 | .CLKREGIM.HDRDEC |
21:52.16 | maejrep | 01f0b4a0 | 41000000 434f5250 00000000 50534451 | ...APROC....QDSP |
21:52.16 | maejrep | 01f0b4b0 | 00000000 43585200 00000000 58310000 | .....RXC......1X |
21:52.16 | maejrep | 01f0b4c0 | 4352535f 4d000048 00505344 00000000 | _SRCH..MDSP..... |
21:52.17 | maejrep | 01f0b4d0 | 004d5446 00000000 52444800 48435253 | FTM......HDRSRCH |
21:52.19 | maejrep | 01f0b4e0 | 50470000 00000053 50000000 00004d50 | ..GPS......PPM.. |
21:52.21 | maejrep | is that meaningful at all? |
22:00.15 | arrrghhh | maybe to a computer. |
22:00.21 | arrrghhh | looks like registers |
22:06.30 | *** join/#htc-linux madCoder- (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
22:44.21 | tekkdrone | Happy New Year all you GMT+N's |
22:44.40 | *** join/#htc-linux rakeem (n=rak@n219079053137.netvigator.com) |
23:03.42 | ALoGeNo | happy new year |
23:05.50 | madCoder- | so looks like on raph800 the sd card is sd2 (0-based) |
23:05.59 | madCoder- | and looks like sd0 is wifi from what I can tell |
23:13.11 | *** join/#htc-linux Igorek (n=igorek@87.69.138.115) |
23:23.13 | *** join/#htc-linux lavender-t (n=jerrey@c-24-17-204-47.hsd1.wa.comcast.net) |
23:25.54 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
23:30.50 | *** join/#htc-linux TrinityDied (n=TrinityD@212-198-148-149.rev.numericable.fr) |
23:37.08 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
23:38.10 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
23:55.26 | *** join/#htc-linux xutywx (n=xutywx@195.205.38.92) |