00:03.46 | dcordes | tmzt: ping? |
00:10.48 | Marajin | hmm |
00:13.34 | Marajin | dcordes: How's it going? |
00:23.17 | dcordes | heya |
00:23.31 | dcordes | got no clue what to do about Xfbdev |
00:32.20 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
00:39.13 | Marajin | dcordes: Did we find anything at all out about it? |
00:44.37 | dcordes | Marajin: it might be a hal problem |
00:45.16 | Marajin | how so? |
00:48.15 | Marajin | dcordes: that doesn't make sense. If there were issues with HAL it wouldn't work in other places |
00:49.50 | dcordes | Marajin: tmzt said that |
00:50.27 | Marajin | dcordes: What, that it's the hal or that if it was the hal it doesn't make sense? |
00:51.23 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-88-212-37.bak.res.rr.com) |
00:52.29 | dcordes | the former |
00:52.36 | Marajin | ok |
00:52.41 | Marajin | maybe I should ask _which_ hal? |
00:52.59 | dcordes | tbh I don't know much about that |
00:53.21 | Marajin | well we know the TS is giving valid raw data via the kernel right? |
00:53.24 | Marajin | and tslib apps can read it fine |
00:53.30 | Marajin | ? |
00:53.39 | dcordes | yes |
00:53.49 | dcordes | it sounds trivial from that position |
00:54.05 | Marajin | but there is no hal along the way to be a problem unless there's a software hal in x |
00:54.56 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
00:55.01 | dcordes | oops |
00:55.14 | Marajin | dcordes: wb |
00:55.16 | dcordes | we could contact the X mailing list |
00:55.28 | Marajin | So we're saying it's part of X's code that's the problem? |
00:55.54 | dcordes | yea we (tmzt) added the fprintfs for that reason |
00:56.07 | dcordes | to the tslib.c code in xserver-kdrive |
00:56.23 | Marajin | if X is using tslib, isn't tslib a hal for the ts? |
00:56.25 | dcordes | wanna take a look? |
00:56.42 | dcordes | somewhat.. |
00:56.51 | dcordes | sounds reasonable |
00:57.02 | dcordes | I don't understand much of it |
00:57.08 | Marajin | then shouldn't what X see be standardized output which would be same on ANY device? |
00:57.31 | dcordes | would be reasonable |
00:57.38 | Marajin | ya see, it doesn't make sense |
00:58.00 | dcordes | it doesn't make sense to me since I have it working in the ts_test and ts_calibrate programs |
00:58.24 | Marajin | exactly |
00:58.39 | Marajin | we know it works all the way up to tslib, and if X was broken then surely it'd be broken on all devics |
00:58.42 | Marajin | (That use tslib) |
01:00.02 | Marajin | well can you link me to the output generated or something, I'll have a look I guess |
01:01.20 | dcordes | man I'm stupid |
01:01.25 | dcordes | ~lart dcordes |
01:01.26 | apt | declares dcordes a moron |
01:01.49 | dcordes | I wondered why there is no output generated by the prints tmzt added to tslib.c in X |
01:02.09 | dcordes | I have the kernel with the android touchscreen |
01:02.17 | dcordes | (git one) |
01:02.25 | dcordes | let me sort that |
01:02.33 | dcordes | .. I have no output present |
01:03.05 | Marajin | so it's as if X isn't even reading from tslib? |
01:09.01 | Marajin | dcordes: The printf stuff is never happening? as if kdrive-tslib stuff never even loads? |
01:10.52 | dcordes | I actually get ts like errors in some situations |
01:12.03 | Marajin | what kinda situations? |
01:16.37 | dcordes | hard to tell. I need to build the kernel first |
01:16.51 | Marajin | Um ok |
01:16.56 | Marajin | pm me or something when you do |
02:28.33 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-16bd1e20c76980cd) |
02:35.22 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
02:39.40 | *** join/#htc-linux Othello__ (i=Magorium@gateway/tor/x-101e5cfa30822b49) |
04:13.54 | Marajin | dcordes: Still alive? |
04:50.39 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfad3b.pool.einsundeins.de) |
05:07.39 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
05:07.44 | *** join/#htc-linux wireddd (n=wired@unaffiliated/wireddd) |
05:23.08 | *** join/#htc-linux wireddd (n=wired@unaffiliated/wireddd) |
05:36.22 | *** part/#htc-linux knobo (n=bohmersp@148.122.202.168) |
05:36.34 | knobo` | morning |
05:53.03 | *** join/#htc-linux kiozen (n=oeichler@p54929F75.dip0.t-ipconnect.de) |
06:05.30 | *** join/#htc-linux exco (n=exco@e181115138.adsl.alicedsl.de) |
06:15.59 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
06:54.59 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
06:59.41 | tmzt | dcordes: I'm back again, we'll see how long -] |
07:00.34 | tmzt | the hal question seems to be whether its a kdrive Xfbdev or a xorg Xfbdev with kdrive ddx |
07:00.58 | tmzt | but hal has locked up my mp900c so I have to keep rebooting with init=/bin/sh |
07:01.58 | tmzt | it seems that hal is very pc specific, at least on debian arm, oe disables some things so I will have to try building that version |
07:04.54 | tmzt | dcordes: can you paste the output of lshal or lshw when you can? |
07:12.08 | *** join/#htc-linux nighthawk08 (n=a@nighthaw.bb.netvision.net.il) |
07:12.22 | nighthawk08 | got an error compiling with bb the prismstumbler_0.7.3+0.7.4pre1.bb package.. |
07:14.35 | nighthawk08 | http://pastebin.com/d2c9110d3 |
07:25.47 | *** join/#htc-linux zoolooc (n=lucian@nrbg-4dbfad3b.pool.einsundeins.de) |
07:53.48 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
07:54.11 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
07:56.12 | marbalon | dcordes: ping |
08:09.50 | *** join/#htc-linux Mooby (n=blindaue@ns2.agat.net) |
08:09.53 | Mooby | hi |
08:13.08 | marbalon | need help for git repositories, anyone can help me ? I don't want to broke something |
08:13.24 | *** join/#htc-linux TeringTuby (n=maarten@195-241-125-243.ip.telfort.nl) |
08:26.31 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
08:27.51 | BabelO_ | hi |
08:35.14 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
08:41.12 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
08:50.56 | *** join/#htc-linux exco (n=excogita@scenicl-69.itm.mw.tum.de) |
08:53.18 | *** join/#htc-linux nighthawk08 (n=a@nighthaw.bb.netvision.net.il) |
09:28.28 | *** join/#htc-linux LunohoD_ (n=alex@e180075020.adsl.alicedsl.de) |
09:38.57 | *** join/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
09:46.08 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
09:59.21 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
10:06.36 | *** join/#htc-linux exco (n=excogita@scenicl-69.itm.mw.tum.de) |
10:13.58 | *** join/#htc-linux goxboxlive (n=goxboxli@226.84-48-126.nextgentel.com) |
10:33.57 | *** join/#htc-linux cmonex (i=xy6091@pool-0398.adsl.interware.hu) |
11:04.21 | knobo | When one makes programs for windows mobile, can one operate direcctly on the hardware, or are there som restrictions on what one can do? |
11:05.53 | *** join/#htc-linux pippo119 (n=Administ@host36-138-dynamic.21-87-r.retail.telecomitalia.it) |
11:10.05 | pippo119 | hi gentleman! is there a good guy that have gps on htc hermes? |
11:11.11 | chab7 | me polaris |
11:15.47 | *** part/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
11:15.50 | *** join/#htc-linux ali1234 (n=al@62.24.214.38) |
11:16.32 | *** join/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
12:18.14 | *** part/#htc-linux pippo119 (n=Administ@host36-138-dynamic.21-87-r.retail.telecomitalia.it) |
12:58.02 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
13:09.16 | *** join/#htc-linux edje2 (n=chatzill@ckpceka.ipv6.kapitein.org) |
13:10.43 | edje2 | hi all, i am looking into openmoko and want to try it first on my HTC Magician. is there anyone with good experience with that pda? |
13:32.47 | exco | hi edje2 |
13:33.42 | *** join/#htc-linux AstainHellbring (n=Administ@unaffiliated/astainhellbring) |
13:33.50 | exco | http://linuxtogo.org/~htcpxa/htcmagician/index.html |
13:36.34 | *** join/#htc-linux cmonex2 (i=xy6091@pool-2726.adsl.interware.hu) |
13:36.42 | exco | edje2: Openmoko is the only image "available" with working dialer but it should suffice for playing around with it. |
13:37.13 | nighthawk08 | got a broken packadge while trying to build gpe-image on the Angstrom for himalaya on -- prismstumbler_0.7.3+0.7.4pre1.bb -- http://pastebin.com/d2c9110d3 -- can anybody help? |
13:37.19 | edje2 | thanks, i downloaded it and will try it later. any hands-on experience with it ? |
13:37.25 | exco | yeah |
13:38.33 | exco | what do you want to know? |
13:40.33 | edje2 | well, it it installs allright for starters ! |
13:40.51 | edje2 | i tried harret once and it just frooze my htc |
13:40.55 | exco | keep in mind you have to hardreset after using linux |
13:41.10 | edje2 | yeah, i will backup before i plunge |
13:41.20 | exco | well if you follow the instructions on that site it works |
13:41.37 | edje2 | ok thanks, i will try it later tonight |
13:43.08 | nighthawk08 | exco,. can you help building angstrom on himalaya? |
13:44.07 | exco | hui? I don't think so... but what are you trying to do? |
13:44.58 | nighthawk08 | well, all I wanted to do is try the angstrom linux on my htc-himalaya -- but I found no package,. so I downloaded the OE, and tried to build one... now I am stuck in this rocedure... |
13:46.21 | exco | well according to the build reports on oe there hasn't been a successful build (?) |
13:46.50 | nighthawk08 | where are the build reports? |
13:47.25 | exco | http://tinderbox.openembedded.net/search/ |
13:48.21 | nighthawk08 | according to the build reports it failed... |
13:48.29 | nighthawk08 | that doesn't stop me from trying.. |
13:48.59 | exco | well there should be an error why it's failing? |
13:50.03 | nighthawk08 | ast time somene tried was two months ago,. there were updates since then.. |
13:51.06 | exco | according to the xda dev forum you can use a blueangel image ... but you will still need a suitable kernel |
13:52.04 | nighthawk08 | I had dcordes building me an image from blueangel... there was no touchscreen and the screen was garbeled... |
13:52.35 | exco | thought so |
13:54.21 | exco | here http://wiki.xda-developers.com/index.php?pagename=HimalayaProjects it says Project goal "make touchscreen and buttons available to X11..." |
13:55.02 | exco | so I guess even if you succeed building an image there won't be a working touchscreen |
13:55.27 | nighthawk08 | hhmmm.... then all I can do is wait for final testings? |
13:55.49 | *** join/#htc-linux JEEB (n=kanakana@a88-114-192-27.elisa-laajakaista.fi) |
13:56.45 | exco | I don't know who is doing work on Himalaya but you can ask if you can help out in any way if... |
13:57.23 | nighthawk08 | I would like to help, the problem is how to located the proper people.... |
13:57.30 | nighthawk08 | or where to post a question... |
13:58.54 | exco | well the guys responding to questions on himalaya+linux on xda-developers will know or.. |
13:59.47 | exco | you can ask again here if there's more people active |
14:00.01 | nighthawk08 | ok,. I'll try that, ... |
14:00.32 | nighthawk08 | thanks |
14:00.54 | exco | no problem |
14:01.56 | dcordes | hi |
14:02.01 | dcordes | tmzt: still around? |
14:08.01 | *** join/#htc-linux supa_user (n=supa_use@archlinux/developer/supauser) |
14:08.06 | exco | nighthawk08: still around? |
14:11.11 | dcordes | nighthawk08: http://forum.xda-developers.com/showthread.php?t=371577&highlight=linux |
14:12.03 | dcordes | nighthawk08: quote from cr2: "You should adapt the recent kernel for Blueangel to be used on Himalaya." -- Maybe if you use the blueangel kernel alongside a blueangel rootfs, you will get a working touchscreen? |
14:18.06 | *** join/#htc-linux jas3 (n=simkiss@ip67-95-151-226.z151-95-67.customer.algx.net) |
14:35.08 | *** part/#htc-linux exco (n=excogita@scenicl-69.itm.mw.tum.de) |
14:36.47 | *** join/#htc-linux nighthawk08 (n=a@nighthaw.bb.netvision.net.il) |
14:39.44 | *** join/#htc-linux mickey (n=mickey@e180183142.adsl.alicedsl.de) |
14:40.20 | *** part/#htc-linux zoolooc (n=lucian@nrbg-4dbfad3b.pool.einsundeins.de) |
14:42.08 | nighthawk08 | dcordes: where can I find the last working blueanger kernel, and image? |
14:44.15 | nighthawk08 | *blueangel |
14:44.17 | dcordes | nighthawk08: I hope I understood cr2 right. you can find the autobuild images here: http://www.angstrom-distribution.org/unstable |
14:44.25 | dcordes | it seams to be down |
14:44.35 | dcordes | look for autobuild directory there |
14:45.08 | nighthawk08 | can you access it now, I can not access the server... |
14:50.49 | *** part/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
14:51.14 | dcordes | nighthawk08: no looks down |
14:52.11 | nighthawk08 | dcordes: do you know who should I contact in order to help with the distrobution of the angstrom on himalaya |
14:52.13 | nighthawk08 | ? |
15:29.04 | *** join/#htc-linux SanMehat (n=san@nat/google/x-965a1627e5d84a41) |
15:29.21 | SanMehat | morning |
15:32.00 | Marex | hello |
15:32.33 | SanMehat | hey Marex, |
15:32.41 | SanMehat | how goes? |
15:35.03 | Marex | SanMehat: fine, thanks ... do you need help with something ? |
15:37.01 | dcordes | SanMehat: long time no see. fancy fixing kaiser msm_sdcc issues with DMA on larger file accesses? |
15:37.29 | *** join/#htc-linux JohnnyK (n=johnnyk@nfx-nat-229.pilsfree.net) |
15:42.51 | dcordes | SanMehat: did you ever come across such problems on the halibut? |
15:50.52 | *** join/#htc-linux exco1 (n=exco@e181115138.adsl.alicedsl.de) |
16:14.03 | SanMehat | Marex: no i'm good |
16:14.09 | SanMehat | dcordes: sorry i'm back got coffee |
16:14.19 | SanMehat | dcordes: what dma issues? |
16:14.48 | SanMehat | dcordes: i'm going to dust off my halibut today and do some testing |
16:14.58 | SanMehat | dcordes: make sure you're using the latest driver from git.android.com |
16:16.08 | dcordes | SanMehat: on the kaiser, we get DMA errors when there are larger file accesses. They occur with latest http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm (based on your branch android-msm) but also when we rebase our stuff on android-msm-2.6.25 |
16:17.02 | SanMehat | dcordes: do you have dmesg dumps |
16:17.03 | SanMehat | ? |
16:17.16 | dcordes | I can make one quickly. |
16:17.25 | SanMehat | ok, email to san@android.com |
16:17.35 | dcordes | k |
16:19.13 | dcordes | we can even boot rootfs from sd. when you try to use find / or use mplayer to play video it always crashes |
16:19.27 | dcordes | package managers also cause the hang |
16:21.59 | dcordes | SanMehat: the syslogd is not reaÃally functional in my work rootfs. how can I let dmesg keep writing to a file while I cause a hang? |
16:22.04 | dcordes | really |
16:23.13 | SanMehat | dcordes: cat /proc/kmsg > /tmp/kmsg.txt |
16:24.51 | dcordes | ok. odd, now find / doesn't kill it |
16:27.32 | dcordes | ok now it crashed copying /usr/share to a different place on the same filesystem |
16:34.08 | *** join/#htc-linux tgreer (n=tgreer@titus.tsone.info) |
16:34.59 | SanMehat | cool, send me the dump :) |
16:35.15 | dcordes | it's empty looks like it didn't sync |
16:35.49 | tgreer | hey dcordes |
16:35.50 | dcordes | I'm reconstructing and copying the output manually |
16:38.53 | tgreer | ok need recommendation here: FreeBSD+apache2 or CentOS+lighttpd ? |
16:42.54 | dcordes | SanMehat: http://rafb.net/p/0FL9jr91.html hope I didn't make typos |
16:43.05 | dcordes | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm here's the kaiser git again |
16:45.19 | SanMehat | dcordes: hang on.. let me check something |
16:46.09 | dcordes | SanMehat: after that I can type things and the keyboard driver (egpio works turning on leds and all) works but I can't cancel the cp process to get a command line again |
16:46.21 | dcordes | so it's no oops |
16:48.13 | SanMehat | dcordes: you're missing some fixes |
16:49.02 | dcordes | SanMehat: which ones would be relevant to the problem |
16:49.06 | dcordes | ? |
16:49.30 | SanMehat | whats this driver based from? |
16:50.21 | SanMehat | dcordes: there was a push 9 days ago which contains a lot of stuff you probably want |
16:50.58 | dcordes | SanMehat: on the driver for htc vogue by Martin Johnson (dzo) |
16:51.43 | dcordes | http://it029000.massey.ac.nz/vogue/ there's his patch |
16:51.48 | SanMehat | dcordes: ah yes, the fellow from .au |
16:51.52 | dcordes | right |
16:52.01 | dcordes | uhm nz |
16:52.13 | SanMehat | right. |
16:52.44 | SanMehat | i'll email martin |
16:53.17 | dcordes | I think he doesn't experience that problem on vogue |
16:53.43 | SanMehat | well regardless he should update his base driver |
16:53.55 | SanMehat | i'm just trying to see what patches he needs |
16:54.17 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
16:54.59 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
16:55.39 | dcordes_ | SanMehat: barry dot carter at gmail dot com he ported the vogue driver to kaiser |
17:01.57 | dcordes_ | SanMehat: he probably already tried those patches |
17:03.05 | SanMehat | dcordes_: well the dump you sent me is from a driver which is missing the fixes |
17:05.29 | dcordes_ | SanMehat: I'm on htc-msm kernel. barry sent me a patch but it didn't apply |
17:06.22 | dcordes_ | SanMehat: If I'd try and apply the mmc fixes manually, which would I need? |
17:06.29 | SanMehat | hang on i'm looking |
17:06.38 | dcordes_ | thanks |
17:10.24 | SanMehat | dcordes_: you want: |
17:11.16 | SanMehat | 6fb12e9a7a205a950a92aec9443bdb906e5c8045 b8212d403b79c3aaf7b79e239cb18bcdf1f5977d fb937ec31df6d246b4ae001320265201f5f67a78 ce637fb633cfe5e5f7bfc2c2a8d9c8fb14052588 |
17:18.23 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
17:22.24 | dcordes_ | SanMehat: thanks. that's so fun if you have nfc what you are doing :D |
17:22.40 | SanMehat | dcordes_: ? |
17:25.39 | Mooby | hi |
17:25.53 | Mooby | I didn't see informations about HTC Diamond pda |
17:26.15 | dcordes_ | SanMehat: I'm applying the patches manually and I don't understand C. that's always fun |
17:26.26 | dcordes_ | Mooby: you got one? |
17:26.43 | Mooby | yes I have one |
17:27.28 | dcordes_ | SanMehat: the suspend and resume functions are not important for solving the problem, no? |
17:29.19 | SanMehat | dcordes_: maybe not, but if you want my help you're going to need to make sure you're running the *latest* stuff |
17:29.38 | SanMehat | I'm sorry but I dont have time to deal with previous versions of the driver |
17:30.04 | SanMehat | I sent the list of patches to Martin for merge with his stuff |
17:30.10 | dcordes_ | omk |
17:33.36 | *** join/#htc-linux tsdogs (n=tsdogs@net70-17.metalit.net) |
17:34.50 | diogene31 | Kevin2: Ping. |
17:37.54 | *** join/#htc-linux edje (n=chatzill@pced.ipv6.kapitein.org) |
17:38.40 | edje | hi all, i am trying to get openmoko on my htc Magician but to no avail. |
17:39.15 | edje | i tried the howto on http://linuxtogo.org/~htcpxa/htcmagician/index.html but after the bootloader starts my screen fades and then it just stops |
17:39.22 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
17:39.33 | edje | ( or is doing stuff, but because the screen is frozen i can see it) |
17:39.56 | edje | anyone with more expierence/luck ? |
17:40.13 | *** join/#htc-linux marbalon (n=balon@aefl176.neoplus.adsl.tpnet.pl) |
17:40.17 | *** join/#htc-linux goxboxlive (n=goxboxli@226.84-48-126.nextgentel.com) |
17:40.46 | marbalon | dcordes_: ping |
17:40.55 | dcordes_ | marbalon: pong |
17:41.31 | marbalon | dcordes_: I ported rtc driver from vogue, and it works on kaiser |
17:41.43 | dcordes_ | real time clock? |
17:41.47 | marbalon | dcordes_: ye |
17:42.12 | marbalon | nothing special, but other driver done ;) |
17:42.13 | dcordes_ | commit. what about usb? |
17:42.46 | marbalon | nothing new about usb, I need to check clocks |
17:42.55 | dcordes_ | I saw your git question yesterday and asked via email |
17:43.04 | dcordes_ | did you already solve it? |
17:43.09 | marbalon | can you help me wit commit, I don't use git for a long time |
17:43.20 | dcordes_ | sure |
17:43.42 | marbalon | first quwstion, how can I add file to repository ? |
17:43.47 | marbalon | git add ? |
17:44.00 | dcordes_ | git-add your changed files, then git-commit file1 file2 file3 (every file? that goes into commit 1), edit description in editor |
17:44.21 | dcordes_ | close editor, git-commuit file4 file5 file6... |
17:44.31 | dcordes_ | etc |
17:45.28 | dcordes_ | then to commit use "git push ssh://<yourusername>@linuxtogo.org/home/groups/mobile-linux/kernel.git htc-msm" |
17:45.50 | edje | it starts fading after it says "jump to kernel" |
17:46.10 | dcordes_ | edje: sorry, no magician here. try to contact exco1 |
17:46.24 | edje | ok, thanks |
17:47.11 | *** join/#htc-linux rob_w (n=rob@adsl-69-230-191-161.dsl.irvnca.pacbell.net) |
17:47.14 | dcordes_ | SanMehat: those patches touch functions that are not present in current htc-msm msm_sdcc.c . Looks like I need to wait for ginge to try it |
17:48.41 | marbalon | dcordes_: Ok commited, now I need to push it, but I remember that I need to remove some lines from .git/config |
17:50.13 | dcordes_ | marbalon: I never edited that file. you can set username before, I need to contact pH5 to change/remove the author filed in my commits |
17:51.08 | marbalon | username is ok, I set it, so I can push now ? |
17:51.44 | dcordes_ | I think so |
17:52.10 | dcordes_ | ginge should also get his ltg git account |
17:52.18 | marbalon | done ;) |
17:52.27 | dcordes_ | ok cool. what can we do with rtc? |
17:53.04 | marbalon | nothing special, we have correct time and date in linux and android ;) |
17:54.23 | dcordes_ | marbalon: ok :) do you knoe what dzo does with rtc on vogue? |
17:54.43 | dcordes_ | s/knoe/know/ |
17:56.01 | marbalon | I don't know, only port it |
17:59.22 | dcordes_ | marbalon: do you know anything about msm_sdcc by chance? I just talked to the google guy who wrote it and he suggests to upgrade to the latest msm_sdcc code in android git |
18:00.08 | marbalon | I do that |
18:00.24 | marbalon | but driver don't work |
18:00.47 | marbalon | only detect card and CRC error after that |
18:00.50 | dcordes_ | did you apply the patches manually to our tree |
18:00.57 | dcordes_ | or did you copy their .c? |
18:01.09 | dcordes_ | hm maybe a stupid question, sorry |
18:02.23 | marbalon | no, download lastest snapshot from google and apply our patches and drivers + vogue to his sources |
18:02.53 | *** join/#htc-linux ``Cube (n=Cube@p50857E5F.dip.t-dialin.net) |
18:02.58 | ``Cube | hey dudes! |
18:03.07 | ``Cube | how far is the android thingy? |
18:03.12 | ``Cube | just in general |
18:03.16 | ``Cube | already usable or not? |
18:03.34 | dcordes_ | marbalon: ah I see. uhm ginge already did a rebase to some reivision of google 2.6.25 android-msm |
18:04.17 | dcordes_ | ``Cube: depends on which device? there's dzo who has a very well working phone with android running on the vogue |
18:04.25 | ``Cube | dcordes_: I got a kaiser |
18:04.38 | dcordes_ | unstable and lacking many functions. |
18:04.44 | dcordes_ | also in driver level |
18:04.55 | marbalon | dcordes_: that will be great to merge google patches to our git repository |
18:05.02 | dcordes_ | are you aware of the according xda-developers thread? |
18:05.17 | dcordes_ | marbalon: do you want the diff ginge gave me? |
18:05.19 | marbalon | dcordes_: but I'm not a git guru :( |
18:05.45 | ``Cube | ah okay, thanks!! |
18:05.59 | marbalon | dcordes_: give me a while |
18:06.13 | dcordes_ | ÃÃcube: can you code C and make kernel development? |
18:06.34 | ``Cube | dcordes_: no sorry, I'm a designer, not a coder ;) |
18:06.40 | dcordes_ | marbalon: I will just email it if you wanna look at some point ;) |
18:06.49 | herriojr | hello |
18:07.37 | ``Cube | dcordes_: okay? |
18:07.37 | herriojr | so I'm new with git....how do I keep up to date with what you guys have done? |
18:07.53 | herriojr | I'm assuming you send me the diffs |
18:08.11 | dcordes_ | cube: ok ^^ |
18:09.08 | ``Cube | dcordes_: by the way, do you need any artwork? |
18:09.49 | dcordes_ | I'm accepting qvga wallpapers for openmoko :) |
18:10.11 | dcordes_ | herriojr: what device? |
18:10.42 | herriojr | kaiser |
18:10.57 | dcordes_ | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=tree;h=refs/heads/htc-msm;hb=refs/heads/htc-msm |
18:11.37 | herriojr | sorry, I'm new to git :) |
18:12.38 | dcordes_ | what do you need help with? |
18:13.16 | dcordes_ | http://forum.xda-developers.com/showpost.php?p=2259079&postcount=3 here is a nice guide on how to get and build htc-msm |
18:13.50 | herriojr | I already got the source, I was just trying to update it |
18:14.14 | herriojr | I was going to take a look at the sd card issue...unless it is already fixed :) |
18:14.30 | dcordes_ | no it isn't, did you see my conversation with SanMehat? |
18:17.15 | marbalon | dcordes_: this is patch http://linuxtogo.org/~marbalon/kaiser.2.6.25.diff for http://git.android.com/?p=linux-msm.git;a=snapshot;h=3079bf4e6d2e041e938a27f13ad2ff907c09b875;sf=tgz |
18:18.14 | herriojr | I'm trying to read it now |
18:18.34 | herriojr | so the drivers weren't up to date |
18:18.58 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d865044.pool.einsundeins.de) |
18:19.00 | dcordes_ | no in htc-msm we have some revision of the driver that dzo used for the vogue |
18:19.16 | marbalon | dcordes_: this is a work patch, so a lot off ugly code |
18:19.53 | dcordes_ | marbalon: does it apply against latest android-msm-26.6.25? |
18:20.00 | herriojr | ok, I'm good with C, so I can merge them for you |
18:21.12 | dcordes_ | that would be nice if we could get the latest sdcc code on kaiser |
18:21.24 | dcordes_ | I think the gist of the differences are the registers.. |
18:21.30 | herriojr | ok |
18:21.42 | SanMehat | which registers? |
18:21.47 | dcordes_ | clock stuff |
18:21.53 | marbalon | dcordes_: yes |
18:21.57 | SanMehat | ahhh |
18:22.00 | SanMehat | CLKCTL? |
18:22.06 | dcordes_ | uhm I think so |
18:22.14 | dcordes_ | it's a function with a huge blob of registers |
18:22.26 | dcordes_ | clock.c I think |
18:22.41 | SanMehat | sorry, i'm not familiar with the clock tree on your device |
18:23.01 | tmzt | dcordes: hey |
18:23.27 | dcordes_ | SanMehat: we have msm7200 on kaiser/polaris/friends, dzo, where ginge got the code has vogue with msm7500.. |
18:23.43 | dcordes_ | and all have differences in the clock setup |
18:23.55 | dcordes_ | tmzt: hiya. I |
18:24.39 | dcordes_ | oops.. figured the Xfbdev printks don't say anything |
18:25.28 | dcordes_ | tmzt: I accidently tried with the android ts kernel code first, but it's the same with your patches |
18:26.29 | dcordes_ | tmzt: also I found the config/hal ... (null) (null) error that Xfbdev gives is common. I have seen it in many Xorg debug outputs across the net |
18:27.08 | herriojr | so what's the location of the git repository I'm merging with ours? |
18:27.24 | herriojr | in relation to the sd driver |
18:28.04 | dcordes_ | http://git.android.com/?p=kernel.git;a=shortlog;h=android-msm-2.6.25 |
18:29.01 | dcordes_ | note htc-msm is at .25 |
18:29.04 | dcordes_ | note htc-msm is at .24 |
18:29.08 | herriojr | ok |
18:30.12 | herriojr | also, does anyone have experience installing applications on android? |
18:30.17 | herriojr | on the device? |
18:30.32 | dcordes_ | herriojr: are you Jon :) ? |
18:30.38 | herriojr | yup :) |
18:30.44 | herriojr | herriojr at gmail dot com |
18:30.59 | herriojr | ;) |
18:31.00 | dcordes_ | herriojr: I already thought it would rain sdcc contributors now |
18:31.07 | dcordes_ | you should contact dzo about that |
18:31.19 | dcordes_ | he does a great job with the android images and knows a lot about them |
18:31.28 | herriojr | what's his email? |
18:31.29 | dcordes_ | http://cs-alb-pc3.massey.ac.nz/vogue |
18:31.57 | dcordes_ | the android initrd in kaiser-bootkit was made by him |
18:32.18 | herriojr | ok |
18:32.22 | dcordes_ | the one at this website is more uptodate. find his email at the bottom |
18:32.24 | herriojr | thanks |
18:32.34 | dcordes_ | herriojr: did you contact barry carter? |
18:33.14 | herriojr | not yet, I'll email him today....I was busy all weekend :) |
18:33.58 | dcordes_ | ok just wanted to emphasize again he's the person who made the required mmc changes for kaiser |
18:34.41 | dcordes_ | did you notice marbalon's patch for google .25 tree? |
18:34.44 | dcordes_ | 20:17 < marbalon> dcordes_: this is patch http://linuxtogo.org/~marbalon/kaiser.2.6.25.diff for |
18:34.47 | dcordes_ | http://git.android.com/?p=linux-msm.git;a=snapshot;h=3079bf4e6d2e041e938a27f13ad2ff907c09b875;sf=tgz |
18:35.08 | herriojr | yeah, I saw that a little ago |
18:35.29 | *** part/#htc-linux ``Cube (n=Cube@p50857E5F.dip.t-dialin.net) |
18:35.38 | herriojr | ah, I did contact dzo last night, but haven't heard from him yet |
18:35.53 | dcordes_ | and I put barry's (ginge) patch http://linuxtogo.org/~lgorris/kaiser-2.6.25.diff |
18:36.32 | dcordes_ | but it doesn't take care of the latest commits in git.android.com, so it won't apply with their latest head |
18:36.50 | dcordes_ | and I don't know which revision it based on |
18:37.01 | dcordes_ | but I'm sure both will help merging |
18:37.44 | dcordes_ | maybe ginge' patched against http://git.android.com/?p=kernel.git;a=commit;h=07fe2e3914202167a4d314bf5e81bbd2f5d3062b (that's before the huge push 9 days ago) |
18:38.02 | dcordes_ | I've got to be going. will be half available from kaiser |
18:38.17 | herriojr | are you saying you want me to merge them or that they'll help when merging .25 msm_sdcc into our .24 msm_sdcc? |
18:38.36 | herriojr | as examples |
18:42.50 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-76-88-212-37.bak.res.rr.com) |
18:44.01 | herriojr | when compiling the kernel, it doesn't seem to have the htckaiser_defconfig |
18:52.40 | herriojr | ok, when following the guide at http://forum.xda-developers.com/showthread.php?t=396782, it appears to auto-checkout htc-msm, and then when I go to make the htckaiser_defconfig, it fails |
18:53.21 | *** join/#htc-linux marbalon (n=balon@aefl176.neoplus.adsl.tpnet.pl) |
18:53.37 | herriojr | fails on step 5 with: |
18:53.37 | herriojr | *** |
18:53.37 | herriojr | *** Can't find default configuration "arch/arm/configs/htckaiser_defconfig"! |
18:53.37 | herriojr | *** |
18:53.37 | herriojr | make[1]: *** [htckaiser_defconfig] Error 1 |
18:53.38 | herriojr | make: *** [htckaiser_defconfig] Error 2 |
18:54.10 | *** join/#htc-linux tgreer (n=tgreer@titus.tsone.info) |
18:55.54 | tgreer | hey all |
18:57.04 | tmzt | dcordes: the prints occur after the input device has already been detected, did you get the lshal paste? |
19:05.49 | marbalon | dcordes_: do you know how vreg works ? |
19:06.20 | marbalon | dcordes_: or how find values needed to write |
19:07.24 | marbalon | marbalon: sorry msm_proc_comm ? |
19:07.49 | marbalon | SanMehat: do you know how msm_proc_comm works ? |
19:08.45 | marbalon | I tried to setup usb works but I thing I need use PCOM_CONFIG_USB_CLKS etc. |
19:12.04 | SanMehat | marbalon: Somewhat |
19:15.37 | SanMehat | marbalon: why whats up? |
19:18.15 | marbalon | I try to get usb working on kaiser |
19:18.50 | marbalon | I think I need enable some clocks related to usb |
19:21.30 | marbalon | SanMehat: do you know something about USB and clocks ? or what should we do to get USB working ? |
19:21.56 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
19:24.24 | SanMehat | I dont know anything about your devices clock-tree so i really can't help much |
19:25.27 | tmzt | marbalon: are you trying to get hsusb or the usb device working? |
19:25.40 | dcordes_ | marbalon: premy and ginge might help with proc_comm |
19:26.08 | marbalon | tmzt: yes |
19:26.33 | tmzt | the port that connects the phone to the computer? |
19:26.44 | dcordes_ | marbalon: I'm also interested in what to trace in order to get vthe required values for lcd backlight and so |
19:28.20 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
19:28.33 | dcordes_ | marbalon: ginge said he was able to switch the backlight off |
19:28.53 | dcordes_ | and got the required info through tracing proc comm |
19:29.44 | dcordes_ | rather tracing it in wince and then access those registers with proc comm |
19:30.25 | tmzt | what are the compatibility issues with the different 7200 devices, is it just the amss version or are there likely to be hardware differences? |
19:32.29 | tmzt | I have seen revisions in the git.android tree and on the mailing list, that suggest that each amss has different protocols in the smd interface, such as different tables, is this the case? |
19:34.51 | dcordes_ | tmzt: I remember swetland saying he couldnt help the kaisers with smd because halibut uses an own amss version for android |
19:35.24 | *** join/#htc-linux OpnSrc1 (i=harisha1@gateway/tor/x-d2d2ee02af35953f) |
19:35.43 | tmzt | is there a table/database of in the wild amss versions? |
19:36.29 | dcordes_ | herriojr: if you checked out htc-msm branch from git.linuxtogo.org kernel.git, you should have a arch/arm/configs/htckaiser_defconfig |
19:37.42 | *** join/#htc-linux LunohoD_ (n=alex@e180072175.adsl.alicedsl.de) |
19:39.01 | herriojr | I did: |
19:39.01 | herriojr | git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git |
19:39.18 | dcordes_ | herriojr: I'm not sure if only the git.android.com android-msm-2.6.25 branch has the latest msm_sdcc.c patches. but if that's the case, I would recommend to use this branch's sdcc code, or better work in that branch entirely. |
19:39.53 | dcordes_ | herriojr: you must also checkout the htc-msm branch |
19:40.08 | herriojr | when I try to check out that branch I am told I already have it checked out |
19:40.21 | herriojr | I'll tell you the exact error when I try again |
19:40.45 | dcordes_ | do git-branch inside the tree |
19:41.54 | herriojr | ok, just a sec, re-cloning |
19:42.14 | dcordes_ | and see if htc-msm is marked with an asterisk |
19:42.28 | herriojr | will do |
19:49.29 | marbalon | dcordes_: tmzt: I think dzo should know somthing because find RTC addr for msm_proc_com |
19:53.44 | herriojr | git checkout -b htc-msm origin/htc-msm |
19:53.52 | herriojr | git checkout -b htc-msm origin/htc-msm |
19:53.58 | herriojr | oops |
19:54.04 | herriojr | git checkout: branch htc-msm already exists |
19:54.26 | herriojr | that's what I get when I try to do a checkout on the branch |
19:55.12 | tmzt | SanMehat: What are the compatibility issues with the different 7200 devices, is it just the amss version or are there likely to be hardware differences? |
19:55.13 | tmzt | I have seen revisions in the git.android tree and on the mailing list, that suggest that each amss has different protocols in the smd interface, such as different tables, is this the case? |
19:56.05 | tmzt | dcordes: what is the link to dzo patch? |
19:57.12 | marbalon | dcordes_: all off his work is in my patch |
19:57.29 | marbalon | look into vogue-hw.c |
19:57.48 | tmzt | I am looking for the lastest raw dzo patch to see how it differs from git-android |
19:58.47 | marbalon | there is a loot of msm_proc_comm with values for his device, should work for our device, but how he find it ???? |
19:59.13 | dcordes_ | herriojr: what does git-branch say in kernel root? |
19:59.27 | tmzt | proc comm just sends a byte or so and reads a response? |
20:00.22 | dcordes_ | marbalon: by tracing the functions in wince with haret |
20:00.30 | SanMehat | tmzt: compatability issues with devices? um well lots.. :) AMSS will be different.. GPIO... etc |
20:00.58 | SanMehat | tmzt: We've been working with QCT and their A-M processor API's to make them cleaner |
20:01.40 | tmzt | the confusion on this channel has seemed to be whether the major differences between communication between the arm11 and the arm9 are driven by changes to amss or if there are actual hardware differences between the devices |
20:03.28 | SanMehat | tmzt: Oh, they're driven mainly by AMSS |
20:03.58 | tmzt | since gpios on the arm9 side are largely abstracted through proc comm and are similar enough to the differences between other htc devices, that was not the primary concern |
20:03.59 | tmzt | ok |
20:05.00 | tmzt | what is the Google upstream policy currently, and what arm kernel tree are you tracking in the public git repo? |
20:06.06 | herriojr | ok, so I can't seem to switch from master to htc-msm |
20:08.08 | herriojr | ok, got it |
20:08.10 | marbalon | night |
20:08.18 | tmzt | by cleaner do you mean that you are relying more on tables in the smd to seperate channels, proc comm, etc.? |
20:08.19 | herriojr | it's a bug in the directions on the tutorial |
20:09.38 | SanMehat | tmzt: Originally everything was done via ONCRPC which is a pain because you cannot issue RPCs from atomic context (RPCs are also fairly heavyweight |
20:10.02 | SanMehat | So things like GPIO/CLOCKS/VREG are now done via proc_comm (mailboxing) |
20:10.50 | dcordes_ | herriojr: ok, I should put a small howto into the readme.txt |
20:11.17 | *** join/#htc-linux edje (n=chatzill@pced.ipv6.kapitein.org) |
20:13.21 | herriojr | I posted the issue on the thread in xda-developers (http://forum.xda-developers.com/showthread.php?p=2486397) |
20:14.21 | tmzt | SanMehat: What is the Google upstream policy currently, and what arm kernel tree are you tracking in the public git repo? |
20:15.00 | SanMehat | tmzt: I would advise asking swetland@android.com about any policy questions |
20:15.06 | tmzt | ok |
20:15.24 | SanMehat | as far as which arm tree we're tracking i'm not 100% sure. swetland would also be the best guy to ask. |
20:15.34 | SanMehat | AFAIK we're tracking linus's master tree |
20:17.25 | tmzt | I only ask because I see nothing newer than 2.6.25 on git.android.com, and you comment about using the newest stuff earlier |
20:17.39 | SanMehat | oh, that is the 'newest' stuff |
20:17.44 | tmzt | ok |
20:17.54 | SanMehat | dcordes_ sent me a kmsg dump for an SDCC failure which was using an obviously out of date driver |
20:18.43 | herriojr | yeah, I'm going to try and move our driver up to date |
20:19.11 | tmzt | as the amss versions are essentially fixed on these devices, the older android driver may be a better fit for them, I think was the reasoning |
20:20.00 | SanMehat | herriojr: Yeah there are a few small fixes that may help out. I'm also just about to fix another issue, and after testing that should get pushed out too |
20:20.22 | herriojr | ok, which git repository is this getting pushed to? |
20:20.50 | tmzt | everything is moving to 2.6.25 though, dcordes and others are still on 2.6.24 as we are working on touchscreen |
20:21.06 | herriojr | ok |
20:21.37 | herriojr | does the 2.6.25 kernel work with android? |
20:22.22 | herriojr | so I'm confused on which branch I should be working on |
20:22.46 | SanMehat | yes the 2.6.25 kernel works for me.. |
20:23.02 | SanMehat | all our development is going into the 2.6.25 branch |
20:23.10 | tmzt | this was my confusion at least, I am working with dcordes on absolute coordinates from the touch screen, while android (qemu version) wants screen coordinates |
20:24.32 | tmzt | I believe it would be possible to expose multiple event devices, one with 0-320/0-240 and the other with the absolute coordinates from tsc |
20:25.13 | tmzt | android (qemu version) would use the first two event devices (I think), and X would use the last two |
20:25.20 | dcordes_ | herriojr: the patch I referred to from gine makes kaiser work finr with android-msm-2.6.25 |
20:25.35 | herriojr | is the 2.6.25 branch located at git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git in the htc-msm branch? |
20:25.37 | dcordes_ | herriojr: according to ginge |
20:25.50 | tmzt | buttons could then be the same as on other htc devices with gpio-keys, and other things would be on their own event devices |
20:26.40 | dcordes_ | herriojr: no. htc-msm is based on a months old version of android-msm (2.6.24) |
20:26.59 | herriojr | ok, can I get a link to the repository I should be working under? |
20:27.26 | tmzt | is there a htc-msm-2.6.25 branch yet? |
20:27.43 | dcordes_ | herriojr: git.android.com branch android-msm-2.6.24 |
20:27.55 | tmzt | against git.android android-msm-2.6.25? |
20:27.56 | dcordes_ | ahh |
20:28.01 | dcordes_ | 25 I mean |
20:28.09 | herriojr | ok |
20:28.18 | tmzt | dcordes: do you have the link to the vogue patch (dzo's) |
20:29.43 | dcordes_ | tmzt: maybe it's in your scrollback. massey university... /vogue |
20:30.35 | dcordes_ | I'm on kaiser now |
20:30.46 | tmzt | ok |
20:31.14 | *** join/#htc-linux Nistur (n=Nistur@client-86-0-103-206.nrth.adsl.virgin.net) |
20:31.18 | tmzt | http://it029000.massey.ac.nz/vogue/ ? |
20:31.25 | dcordes_ | yes |
20:31.57 | dcordes_ | tmzt: all the links are in linuxtogo.org/ tilde lgorris/kaiser-bootkit |
20:32.37 | dcordes_ | README.txt |
20:33.36 | tmzt | they're against a android-msm-2.6.25 commit which is in that page, but I can't copy it |
20:34.08 | *** part/#htc-linux supa_user (n=supa_use@archlinux/developer/supauser) |
20:35.32 | Nistur | Hi, I'm trying to put my Blueangel into Bootloader mode but pressing Power + Record + Reset just performs a hard reset |
20:36.10 | Nistur | can anyone help? |
20:37.17 | ellisway | Nistur have u looked at http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners ? |
20:37.56 | tmzt | dcordes: are you away from your computer, can you build a 2.6.25 kernel, or did you get one from ginge? |
20:38.11 | Nistur | yes I had... absolutely typical, as soon as I ask the question, it works... Thanks :) |
20:48.43 | Nistur | I can't find information on it in the wiki, is power on the Blueangel sorted? Last time I tried I couldn't go into standby and the charger didn't work. |
20:50.01 | ellisway | it depends on your boardid |
20:50.25 | ellisway | i think boardid 6 is still broken on suspend/resume |
20:51.28 | dcordes_ | tmzt: I only have this patch from ginge. http://linuxtogo.org/~lgorris/kaiser-2.6.25.diff it doesn' |
20:51.57 | dcordes_ | t apply against latest android-msm2.6.25 |
20:52.00 | Nistur | hmm ok, thanks ellisway I'll look into it |
20:52.56 | ellisway | np sry i cant be much more help have never played with a blueangel |
20:52.59 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
20:53.03 | Nistur | not a problem :) |
20:53.05 | ellisway | BabelO is the 1 to ask |
20:53.54 | dcordes_ | tmzt: it patches the htc-msm stuff into android-msm2.6.25. Ginge says he has everything working in it. I just do not know which revision it's against. |
20:54.24 | Nistur | ok, thanks. If I get it working on my blueangel I may be allowed to flash my girlfriend's Wizard too |
20:54.35 | dcordes_ | to avoid confusion, htc-msm doesn't have htcvogue machine, but only htckaiser and htcpolaris. |
20:55.01 | dcordes_ | herriojr: did you get the htc-msm branch building htckaiser kernel? |
20:59.24 | herriojr | yes |
21:00.08 | herriojr | but I am supposed to work on the android-msm-2.6.25 branch, correct? |
21:00.25 | herriojr | talking about all the different branches is confusing me right now :) |
21:03.11 | tmzt | how can the kaiser patch work if the defconfig calls /sbin/hotplug? |
21:03.26 | tmzt | don't we need udev? |
21:05.28 | *** join/#htc-linux PrometheusX (n=Promethe@static-76-160-187-136.dsl.cavtel.net) |
21:08.18 | *** join/#htc-linux ginge (n=baz@89.192.214.206) |
21:08.33 | ginge | hi |
21:10.03 | ginge | dcordes_: ping |
21:10.55 | herriojr | so, someone straighten out my thinking at the moment |
21:11.24 | herriojr | currently, under our htc-msm branch (2.6.24), the sd driver is broken |
21:11.59 | herriojr | there are updates in 2.6.25, so I need to migrate those fixes to our htc-msm branch? |
21:12.02 | ginge | yeah, kinda. I was going to ask SanMehat a few questions ;) |
21:12.27 | ginge | herriojr: I have alreay migrated all of the .24 code to the .25 branch. no difference |
21:12.55 | ginge | herriojr: I will upload a patch somewhere once I have staged the additions in git |
21:13.16 | herriojr | ok, which code base should I patch? |
21:13.30 | ginge | herriojr: I patched against android-msm-2.6.25 |
21:13.35 | herriojr | ok |
21:13.43 | ginge | give me 10 to stage it up |
21:13.44 | herriojr | let me know when you have the patch up, then I'll start working |
21:17.33 | *** join/#htc-linux NiZoX (n=none@2a01:e35:8a13:a2b0:21c:c0ff:fe25:ff68) |
21:17.33 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
21:19.52 | dcordes_ | ginge: give me the patch and I will email pH5 about creating a new branch in linuxtogo |
21:20.21 | dcordes_ | ginge: marbalon has ported rtc to kaiser |
21:20.28 | ginge | same here :) |
21:20.33 | ginge | its in this patch |
21:21.44 | dcordes_ | you should really get a linuxtogo account then when we have a branch htc-msm-2.6.25 in the git |
21:22.00 | ginge | shrugs |
21:22.12 | ginge | maybe now I know what I am doing with git (kinda) |
21:22.16 | herriojr | email me at herriojr at gmail dot com when you have the patch up, I have to jump onto my windows partition at the moment :( |
21:22.28 | ginge | k |
21:22.43 | *** part/#htc-linux herriojr (n=herriojr@65.173.101.2) |
21:24.14 | ginge | ugh this mobile connection is shockingly slow |
21:27.16 | ginge | dcordes_: http://headfuzz.co.uk/files/android/git-diff-2.6.25-040808.diff |
21:28.00 | dcordes_ | this is against current android.com revision? |
21:28.13 | ginge | yeah |
21:29.04 | dcordes_ | great, I will ask pH5 to open a new branch htc-msm-2.6.25 as a clone of android-msm-2.6.25 |
21:29.41 | ginge | dcordes_: could you do me a favour and email that link to herriojr please. gmail and konqueror dont work at all any more. |
21:30.27 | *** join/#htc-linux NiZoX (n=none@2a01:e35:8a13:a2b0:21c:c0ff:fe25:ff68) [NETSPLIT VICTIM] |
21:30.28 | dcordes_ | of course |
21:30.32 | ginge | thanks |
21:32.32 | dcordes_ | ginge: could you check what the android-msm head is this is against? |
21:32.58 | dcordes_ | I don't know the git command, always look it up in the git web |
21:33.32 | ginge | android-msm-2.6.25 3079bf4e6d2e041e938a27f13ad2ff907c09b875 |
21:34.01 | dcordes_ | thanks |
21:35.54 | ginge | btw I didn't fully test the rtc code, so you might want to compare with marbalon's patch |
21:37.31 | dcordes_ | ok I sent the link to jon |
21:38.10 | dcordes_ | ginge: how'd I just tryout your rtc code? |
21:38.34 | dcordes_ | marbalon said it would make linux get the correct time?? |
21:39.07 | ginge | certainly keep the correct time, yes |
21:39.32 | dcordes_ | I don't understand this |
21:39.37 | ginge | um, just enable it |
21:39.41 | dcordes_ | where does it get it from? |
21:40.31 | ginge | presumably an rtc core somewhere |
21:40.53 | ginge | the the values I got out were not tested for accuracy |
21:41.06 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
21:42.31 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
21:43.27 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfad3b.pool.einsundeins.de) |
21:47.44 | ginge | dcordes_: oh, I started on power management too, just ignore that for moe |
21:47.48 | ginge | s/moe/now/ |
21:48.17 | dcordes_ | k |
21:48.24 | dcordes_ | did you manage to turn on the backlight? |
21:48.42 | ginge | briefly before it locked up |
21:49.05 | ginge | therefore that part is commented out again :) |
21:51.25 | dcordes_ | I noticed the power drain is quite doable on linux |
21:51.27 | ginge | ./soldering_iron settemp=450c setP=800 setI=200 setD=700 |
21:51.33 | ginge | damn you |
21:51.37 | ginge | ;) |
21:52.06 | dcordes_ | you've got a soldering_iron pc interface? |
21:52.08 | ginge | if you mean it sucks it dry in less time than it takes to say "oh my, that is one hungry sucka", then yeah, |
21:52.19 | ginge | dcordes_: working on it. |
21:52.27 | ginge | dcordes_: via an AVR chip |
21:52.36 | ginge | just tuning the PID algorithm |
21:53.07 | ginge | the original irons temperature management was shit |
21:53.14 | dcordes_ | already registred a patent? |
21:53.36 | ginge | must have been done before |
21:53.55 | dcordes_ | I plug my soldering iron in and when it solder the temperature is good :D |
21:54.06 | ginge | its not like it will stay hooked up to the PC once I have set the parameters up... and its also not like it took me ore than an hour to make it |
21:54.45 | ginge | this is a reflow station with a hot air gun |
21:55.11 | dcordes_ | right :D |
21:55.22 | ginge | too hot and you blow the whole board away in one second. |
21:55.26 | dcordes_ | does the drone fly already? |
21:55.40 | ginge | nah, I made yet another mistake int he pcb |
21:55.49 | ginge | version 3 is a winner though ;) |
21:56.07 | ginge | also the simulations show me the motors are probably too weak :/ |
21:56.17 | dcordes_ | good lukck then. seems to be quite a time consumming process, designing and evaluating pcbs |
21:56.43 | ginge | dcordes_: the turnaround on a small PCB fabrication is in the order of weeks. |
21:57.57 | ginge | I would say its much easier to reverse engineer phones and port linux onto them, but I would be lying. A lot. |
22:00.39 | ginge | dcordes_: you will need to port the gpio init fix to the new branch, I forgot :/ |
22:01.19 | ginge | dcordes_: and marbalon's rtc is much cleaner than mine. |
22:02.05 | ginge | I also for that you need the extras in smd |
22:02.15 | dcordes_ | oh with the gpio init, I was too fast pusing it |
22:02.34 | dcordes_ | it turned out the keyboard error still occurs sometimes |
22:05.13 | ginge | ah |
22:06.05 | ginge | if you redownload the patch, I added the missing proc_comm stuff for the rtc |
22:07.42 | dcordes_ | k, we need the andoird.25 clone first anyway |
22:08.06 | ginge | just in case you wanted to try locally ;) |
22:08.24 | ginge | and tell me how much is broken... |
22:10.24 | dcordes_ | ok I'm in the kitchen while it's cloning |
22:20.04 | *** join/#htc-linux wasup (n=Tech@208.47.103.106) |
22:20.28 | wasup | hmmm.... any updates? |
22:22.57 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
22:26.00 | SanMehat | back |
22:28.49 | ginge | wasup: not that I know of. Other than the port to .25 which doesnt change anyting interesting |
22:29.12 | dcordes_ | SanMehat: ginge dropped in. your latest fixes don't help with the kaiser dma problem |
22:32.20 | SanMehat | doh |
22:32.24 | ginge | really |
22:32.31 | ginge | damn irq triggers before dataend |
22:36.52 | SanMehat | oh. |
22:37.03 | SanMehat | yeah this patch may fix that issue |
22:37.09 | SanMehat | or at least handle it properly. |
22:37.11 | SanMehat | its a write correct? |
22:41.31 | ginge | SanMehat: yes, always on a write |
22:41.40 | SanMehat | ginge: Yeah the patch should fix that issue |
22:41.50 | ginge | crosses fingers |
22:42.08 | SanMehat | crosses toe |
22:42.10 | SanMehat | s |
22:42.12 | SanMehat | brb coffee |
22:43.45 | ginge | brb booting patched kernel |
22:48.32 | *** part/#htc-linux wasup (n=Tech@208.47.103.106) |
22:51.33 | dcordes_ | ginge: any luck? |
22:54.22 | dcordes_ | I've got android-msm-2.6.25 cloned |
23:00.31 | dcordes_ | brb |
23:01.16 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
23:06.09 | *** join/#htc-linux herriojr (n=herriojr@65.173.101.2) |
23:11.03 | *** join/#htc-linux ginge (n=baz@89.192.237.71) |
23:11.15 | ginge | doh |
23:11.22 | dcordes | what's up? |
23:11.37 | ginge | broken still |
23:11.46 | ginge | msm_datamover_irq_handler id 8, status 200000002msm_datamover_irq_handler id 8, error 800000008 flush0 c203mmc0: DMA error (0x800000008) |
23:12.08 | dcordes | what did you try? |
23:12.20 | ginge | San sent me a patch |
23:13.38 | dcordes | k |
23:13.50 | dcordes | was just wondering |
23:15.37 | ginge | >>warning device WM_BTWC of type device %s battery critically low! |
23:15.52 | ginge | hmm. I need to work on my dbus skills somewhat |
23:16.02 | ginge | it shoudln't send to all windows :/ |
23:16.26 | ginge | goes and finds a cable |
23:22.53 | dcordes | ginge: got your beagle yet? |
23:35.47 | SanMehat | ginge: send me your console output for the failure and i'll look at it a bit tonight |
23:52.22 | *** join/#htc-linux CPress (n=cpress@CPE-72-129-218-217.new.res.rr.com) |
23:52.46 | *** join/#htc-linux ginge (n=baz@89.192.222.137) |