| 00:02.07 | dcordes | everything ok. you? what does that mean, 3db SNR? |
| 00:02.23 | dcordes | does your dsl modem report signal stability? |
| 00:02.28 | marajin_ | dcordes: You don't understand signal to noise ratios? |
| 00:02.38 | dcordes | I know snr from wifi |
| 00:02.42 | marajin_ | heh |
| 00:02.45 | *** join/#htc-linux wasup (n=wasup@208.47.103.106) |
| 00:02.51 | marajin_ | well they apply to DSL too |
| 00:02.56 | marajin_ | anyway |
| 00:03.06 | dcordes | how do you figure what's your dsl SNR? |
| 00:03.10 | marajin_ | the lower your SNR, the higher your throughput but the more sensitive to line noise |
| 00:03.14 | *** join/#htc-linux tmzt (n=tmzt@adsl-70-228-92-50.dsl.akrnoh.ameritech.net) |
| 00:03.35 | marajin_ | dcordes: My ISP will tell me and change it along with my modulation settings if I phone 'em up |
| 00:03.38 | cr2 | marajin_: tcp will take care of it ;) |
| 00:03.56 | marajin_ | anyway, 3db is the /lowest/ they can set it they claim |
| 00:04.02 | marajin_ | they're shocked it syncs at all at 3 |
| 00:04.25 | cr2 | 3db is 2:1 ? |
| 00:04.35 | marajin_ | I think so |
| 00:04.41 | cr2 | ok. |
| 00:04.51 | cr2 | good night. |
| 00:05.03 | wasup | ok... so i downloaded the kaiser version of android... cause they have a working keyboard... then it shows the red lazer... and i see the android main screen... then it goes back to the lazer? |
| 00:05.07 | marajin_ | So basically, the fact I can operate at it at all is odd, the fact that I can stay stable for 8+ das is crazy |
| 00:05.08 | wasup | anyone got any ideas |
| 00:05.21 | marajin_ | wasup: That usually means android crashed and is attempting to reboot |
| 00:06.03 | wasup | hmm... how different are the keyboards on the kaiser and the titan? |
| 00:06.18 | marajin_ | No idea to be honest |
| 00:06.23 | marajin_ | I've never even seen a titan |
| 00:07.56 | marajin_ | hmm when's the raphael get released in the UK? :p |
| 00:09.26 | wasup | not for awhile? |
| 00:09.39 | marajin_ | meh |
| 00:09.46 | wasup | wasnt it supposed to be released in may? |
| 00:09.48 | marajin_ | the diamond is already out in germany I think |
| 00:10.06 | wasup | isnt it like 800 |
| 00:10.17 | wasup | or something like that? thats way too much for a phone |
| 00:13.13 | marajin_ | probably |
| 00:13.39 | ginge | wasup: were you asking about onscreen keyboard on the forums? |
| 00:14.06 | wasup | yeah... dzo had made it so the keyboard was on the bottom of the titan and functioning...now its back at the top cause the latest image |
| 00:14.07 | marajin_ | hey ginge |
| 00:14.17 | ginge | wasup: easy to fix |
| 00:14.35 | wasup | k. how? |
| 00:15.37 | ginge | msm_fb.c in do_update |
| 00:15.59 | ginge | mdp_dma_to_mddi(par->fb_info->fix.smem_start+480*640,480,240,KEYBOARD_HEIGHT,0,320-KEYBOARD_HEIGHT); |
| 00:16.05 | ginge | is what you want. |
| 00:16.33 | ginge | we have to do the same for kaiser. |
| 00:17.00 | wasup | ok. |
| 00:17.00 | ginge | wasup: compare this to yours |
| 00:17.01 | ginge | http://pastebin.com/m712fb7c1 |
| 00:17.08 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
| 00:17.15 | ginge | there are a few places you will need to change the display offset |
| 00:17.28 | ginge | it should work ok with that pastebin |
| 00:17.45 | ginge | I should have the keyboard for titan ported by tomorrow... |
| 00:18.07 | wasup | oh.. well then ill just wait... :)... u have a titan? |
| 00:18.17 | ginge | no, I am doing it for joshts0 |
| 00:18.34 | ginge | I might as well do the onscreen keyboard fix too |
| 00:20.00 | wasup | oh... if i can find my other titan... i think it was stolen though, or i just misplaced it.. I can donate it to you or Dzo... it just wont activate on the a network |
| 00:20.17 | wasup | still works fine though |
| 00:21.00 | ginge | thanks for the offer, but I am fine thanks. I have about 5 phones that I need to hack on as it is ;) |
| 00:21.21 | wasup | oh.. ok.. so how did u port the keyboard over? |
| 00:21.36 | wasup | did u port it from the kaiser rom? |
| 00:21.42 | ginge | joshts0 did the traces on the gpios so I just ported kaiser kb |
| 00:22.49 | wasup | oh... I had tried to boot the kaiser version of android.. and it went past the red laser.. and started.. :) then it went back to the laser... :( |
| 00:22.55 | wasup | hahaha |
| 00:23.04 | ginge | crashing |
| 00:23.09 | wasup | yeah |
| 00:23.19 | ginge | as soon as it tries t talk to the modem |
| 00:23.49 | wasup | oh.. i haven't been able to get my titan to get on a data connection... |
| 00:23.56 | wasup | can we ssh now? |
| 00:24.08 | wasup | or is that not supported still |
| 00:24.11 | ginge | um... yes? |
| 00:24.22 | ginge | it sort of depends |
| 00:24.25 | wasup | no usb driver yet? |
| 00:24.32 | ginge | no usb |
| 00:24.35 | wasup | aw. |
| 00:24.40 | ginge | yeah :( |
| 00:24.49 | wasup | how long till that happens roughly |
| 00:24.56 | ginge | who knows |
| 00:25.04 | ginge | how long will it take you ;) |
| 00:25.17 | wasup | oh hahaha... im not that technically advanced |
| 00:25.29 | wasup | that would take me alot of time |
| 00:25.30 | ginge | thats pretty much the way it rolls here. someone just runs with something until it is donw |
| 00:25.56 | wasup | oh... what i dont get.. is in the kernal it shows when the usb is connected and disconnected |
| 00:26.02 | ginge | it only takes one dedicated person to write/fix a feature. It could take from 6 hours to infinity |
| 00:26.16 | wasup | so shouldnt a peice of the driver already be inthere? |
| 00:26.36 | ginge | wasup: some of the driver is there already, but we think it is set to the wrong mode |
| 00:26.46 | wasup | oh... |
| 00:26.48 | ginge | wild guess |
| 00:27.21 | wasup | well like thats what i wasnt getting.. cause if recognition is part of a driver and it was recognizing it |
| 00:27.39 | wasup | so its the mode.. |
| 00:27.46 | ginge | shrugs |
| 00:28.05 | ginge | more likely usb mode+ a whole load of other stuff |
| 00:28.33 | ginge | I would put my money on dzo getting it working within no time. the guy is a machine |
| 00:28.35 | wasup | does anyother android (distributions?) have usb enabled yet? |
| 00:28.56 | ginge | do you mean hardware? |
| 00:29.05 | meredydd | ginge: Oh, dear. You're back to crash on first touching the modem? Thought it was just data these days |
| 00:29.26 | ginge | meredydd: we are talking about a different phone |
| 00:29.39 | ginge | meredydd: titan to be exact |
| 00:29.49 | meredydd | Oh, rightright. Durr. |
| 00:30.04 | wasup | yeah... |
| 00:30.14 | ginge | wasup: the kernel deals with drivers and setting the hardware up. the distribution android etc just plugs into that interface. |
| 00:30.24 | ginge | so usb will just work when the driver work sin the kernel |
| 00:30.51 | ginge | meredydd: I have more stable data in android, but I broke the sd driver ;) |
| 00:31.03 | meredydd | Woo. I'll take that trade! |
| 00:31.06 | meredydd | Define "more stable"? |
| 00:31.19 | wasup | well what i meant was.. since technically the kernal notices the usb... does android even have the ability to use the driver if it was capable |
| 00:31.23 | ginge | meredydd: don't get the hopes up too high stable == crash after 5 minutes ;) |
| 00:31.41 | meredydd | Hey...5 mins is a significant improvement. |
| 00:31.53 | wasup | android runs on my titan for about 4 |
| 00:31.58 | ginge | wasup: probably not at this stage. Its ripped from an emulator so probably wont work |
| 00:32.02 | Marajin | why, why does android hate us? |
| 00:32.10 | ginge | Marajin: cos its crap |
| 00:32.16 | meredydd | 5 mins is also just about long enough to do a basic tap-through an app |
| 00:32.26 | wasup | ok... thats what i wanted to know... so it's not like we're left out.. no one has been able to get it to work |
| 00:32.29 | Marajin | yes but our ginger kaisers will sort it out! :P |
| 00:33.05 | ginge | Marajin: I will just use a good OS until google work their magic and make it usable |
| 00:33.21 | wasup | when do u think that will come? |
| 00:33.31 | Marajin | wasup: When do you retire? ;) |
| 00:33.35 | meredydd | ginge: if that's what you're doing, why are you wasting your time making Android work for everyone else? :P |
| 00:33.36 | ginge | your guess is as good as mine. |
| 00:33.50 | ginge | meredydd: its a good benchmark for working features |
| 00:34.43 | ginge | I am heading off to bed. I cant think straight. This SD driver is really pissing me off. |
| 00:35.03 | Marajin | ginge: Take it easy man, catcha ya tomorrow |
| 00:35.10 | ginge | night-o |
| 00:35.38 | *** join/#htc-linux tmzt (n=tmzt@adsl-70-228-92-50.dsl.akrnoh.ameritech.net) |
| 00:38.17 | wasup | night ginge |
| 00:38.40 | wasup | well im about to leave work.. good night everyone |
| 01:21.27 | *** part/#htc-linux exco (n=exco@e181109207.adsl.alicedsl.de) |
| 01:25.23 | *** join/#htc-linux wireddd (n=wired@unaffiliated/wireddd) |
| 01:29.48 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-af1e65d60115ca0a) |
| 01:37.26 | CPress | hey guys |
| 01:46.46 | *** join/#htc-linux pronto (n=pronto@pool-71-179-232-167.bltmmd.fios.verizon.net) |
| 01:49.20 | Marajin | CPress: 'lo her |
| 01:49.27 | Marajin | s/her/there/ |
| 01:53.48 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-88038706ecf0c75b) |
| 02:01.22 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-95a1141311abc3b1) |
| 02:24.14 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 02:53.54 | CPress | What's new in the htc-linux world? |
| 03:29.08 | *** join/#htc-linux AstainHellbring (n=Administ@unaffiliated/astainhellbring) |
| 03:39.26 | Marajin | CPress: Hmm, Nothing off hand |
| 04:03.35 | *** join/#htc-linux OpnSrc1 (i=harisha1@gateway/tor/x-40be1bfe6d4be1e9) |
| 04:32.51 | ptl | ok |
| 04:33.15 | ptl | veeeeeeeeeeeeeery offtopic question, but I have been googling for weeks for that. Feel free to kick/ban me if you feel it's inadequate. |
| 04:34.24 | ptl | I have an HTC Athena X7501, which does not have a secondary camera. However, I'd like very much to make videocalls - my carrier supports it and my line supports it. Is there a way for me to make videocalls using the primary camera< A third-party software, maybe? |
| 04:34.34 | ptl | maybe HTC Linux will have this option |
| 04:41.11 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 04:45.03 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8469.pool.einsundeins.de) |
| 04:46.14 | *** join/#htc-linux tmzt_ (n=root@adsl-70-228-92-50.dsl.akrnoh.ameritech.net) |
| 04:46.31 | tmzt_ | dcordes: just saw you on the log, what's going on |
| 04:57.20 | Marajin | dcordes: Ping? |
| 05:50.20 | pigeon | anyone still working on the wallaby? |
| 05:51.36 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-3401481fe0ddcea5) |
| 05:51.54 | *** join/#htc-linux kiozen (n=oeichler@p54929B15.dip0.t-ipconnect.de) |
| 05:57.55 | *** join/#htc-linux pleemans (n=peter@dD577D009.access.telenet.be) |
| 06:23.11 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
| 06:26.41 | *** join/#htc-linux rob_w (n=bob@M8e79.m.pppool.de) |
| 06:35.13 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 06:35.30 | *** join/#htc-linux goxboxlive (n=goxboxli@31.84-48-212.nextgentel.com) |
| 06:36.40 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
| 06:49.09 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
| 07:13.26 | *** join/#htc-linux zoolooc (n=lucian@nrbg-4dbf8469.pool.einsundeins.de) |
| 07:13.53 | Rroet | moin |
| 07:14.03 | zoolooc | moin |
| 07:14.42 | Marajin | is it? |
| 07:14.43 | Marajin | damn |
| 07:26.32 | Rroet | Yes Mara, open they eyes... take a computer break. smell the coffee and the fresh smell of smog in the outdoors |
| 07:26.37 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 08:05.17 | *** join/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
| 08:10.56 | BabelO_ | hi |
| 08:11.38 | kiozen | BabelO_: morninig |
| 08:29.02 | Marajin | Rroet: Sod that. I'm not going outdoors! |
| 08:29.09 | Marajin | Rroet: They have sunlight out there! |
| 08:29.11 | Marajin | hisses. |
| 08:38.31 | Rroet | hehe |
| 08:38.38 | Rroet | back in your coffin then |
| 08:38.57 | ginge | lid creaks open... |
| 08:38.59 | ginge | morning all |
| 08:49.55 | Marajin | Rroet: I am actually photosensitive so I'm allowed to shun sunlight, it's awesome :) |
| 08:52.02 | ptl | me too |
| 08:52.31 | Marajin | ptl: You're photosensitive? |
| 08:53.07 | ptl | I am |
| 08:53.24 | ptl | had to use sunglasses but I don't like it |
| 08:53.29 | Marajin | good fun in a world that insists sunlight is good and healthy and wholesome? |
| 08:53.32 | ptl | so I just keep blinking. And avoid the sun |
| 08:53.40 | Marajin | heh |
| 08:53.44 | *** join/#htc-linux axe- (n=axe@217.116.62.236) |
| 08:53.45 | ptl | way too sunny |
| 08:53.50 | ptl | oh |
| 08:53.53 | ptl | and I live in Brazil |
| 08:53.55 | Marajin | yeah I got photochromatic glasses and stay inside a lot |
| 08:54.23 | ptl | happily I work on the night shift, midnight to 8 AM. |
| 08:54.31 | ptl | and I sleep at day. |
| 08:54.45 | *** join/#htc-linux Bendy (n=sniveri@bb-81-175-215-228.dsl.phnet.fi) |
| 08:54.51 | ptl | Don't worry, I don't suck blood. |
| 08:54.54 | Marajin | Well I feel better at night anyway ;) |
| 08:55.33 | Marajin | I blistered my arm for falling asleep with it dangling where light could get at it under the blind a coupla weeks ago =/ |
| 08:55.35 | Rroet | bla bla bla, can't help it you's a freak of nature :) |
| 08:55.46 | Marajin | help it? I like being a freak of nature :P |
| 08:55.47 | Rroet | Doesn't make you less nice or a lesser person though... |
| 08:56.18 | Marajin | bah geeks were made for the pale glow of LCD screens |
| 08:56.24 | Marajin | we don't need sunlight |
| 08:56.28 | ptl | you bet. |
| 08:56.30 | ptl | :) |
| 08:56.46 | ptl | I like the sun. Really. But he doesn't like me. |
| 08:56.55 | Marajin | heh |
| 08:57.00 | Marajin | I just plain don't lik him |
| 08:57.07 | Marajin | nobody seems to realise he's bad for us aaaall |
| 08:57.24 | Marajin | suntans are not healthy, suntans are the body trying to protect itself from being burnt |
| 08:57.53 | ptl | Yeah, but the Sun causes our body to build vitamin D. And that's necessary for our health. |
| 08:58.13 | ptl | Lack of vitamin D can even cause brain problems... |
| 08:58.30 | ptl | You can also eat a lot of fish. That substitutes sunlight. |
| 08:58.38 | Marajin | actually vitamin D is available in food |
| 08:58.48 | ptl | I do eat a lot of fish. Salmon almost everyday. |
| 08:58.50 | Marajin | and we generally get the needed aounts from food ANYWAY |
| 08:59.09 | Marajin | actually vitamin D levels are part of what's wrong with me |
| 08:59.14 | Marajin | I got too MUCH of the stuff |
| 08:59.47 | Marajin | plus, it's not even a vitamin.. damn stuff |
| 09:00.07 | ptl | ? |
| 09:00.18 | ptl | it's not even a vitamin? how so? :P |
| 09:01.41 | Marajin | It's a hormone |
| 09:04.16 | Marajin | is this the pause for googling? |
| 09:10.51 | ptl | nope |
| 09:10.54 | ptl | I am at work now |
| 09:10.56 | ptl | 6:11 here |
| 09:10.59 | ptl | 6:11AM |
| 09:11.51 | Marajin | Any excuse |
| 09:45.20 | *** join/#htc-linux Marex (n=vasum7am@auryn.karlin.mff.cuni.cz) |
| 10:02.56 | *** join/#htc-linux Red_Lion (n=lion@194.226.40.192) |
| 10:03.10 | Red_Lion | hello, cr2 |
| 10:03.45 | Red_Lion | can you help me? |
| 10:04.18 | Marajin | cr2: You're too popular ;) |
| 10:04.36 | Red_Lion | http://ibot.rikers.org/%23htc-linux/20080516.html.gz :) |
| 10:05.03 | Red_Lion | i'm start port to g900 and he can help :) |
| 10:06.04 | Marajin | Poor cr2. Is there a device he hasn't at some point had to work with? :P |
| 10:06.29 | Red_Lion | :) |
| 10:07.22 | Red_Lion | i can be he hand with work on this device |
| 10:08.40 | Red_Lion | BabelO, can you help me too? :) |
| 11:03.49 | LunohoD | Red_Lion :-P |
| 11:07.53 | Red_Lion | LunohoD, :) |
| 11:08.09 | Red_Lion | LunohoD, and you here to :) |
| 11:15.58 | ginge | make -j 128 |
| 11:16.11 | ginge | oops |
| 11:16.22 | LunohoD | cluster? |
| 11:16.25 | ginge | yeah |
| 11:16.29 | LunohoD | cool |
| 11:17.04 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 11:17.21 | Red_Lion | ginge, how many nods? :) |
| 11:18.25 | ginge | Red_Lion: up to about 8000 or so. i don't have permission to the whole cluster, and I would get shot for using them |
| 11:18.57 | Red_Lion | ginge, what cluster engine? |
| 11:19.45 | ginge | not sure exactly as its all offsite. it uses a heavily modified distcc |
| 11:20.22 | Red_Lion | hmm... compile cluster? |
| 11:20.52 | ginge | its multipurpose I believe. The video guys do rendering on the cluster |
| 11:20.57 | ginge | I just type make and drink coffee ;) |
| 11:21.32 | Red_Lion | :) |
| 11:24.10 | ginge | laters |
| 11:29.53 | *** join/#htc-linux Robwoerle (n=bob@Ma1f8.m.pppool.de) |
| 11:31.33 | cr2 | hi |
| 11:31.57 | cr2 | pigeon: reviving wallaby port will be really cool |
| 11:41.06 | *** join/#htc-linux Genesis (n=Ronan@AMontsouris-153-1-28-204.w86-212.abo.wanadoo.fr) |
| 11:41.59 | *** part/#htc-linux Genesis (n=Ronan@AMontsouris-153-1-28-204.w86-212.abo.wanadoo.fr) |
| 11:42.08 | *** part/#htc-linux ginge_ (n=baz@80.229.188.31) |
| 11:44.42 | pigeon | cr2: i'd love that too :) |
| 12:08.56 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
| 12:09.13 | *** join/#htc-linux exco (n=exco@e181072220.adsl.alicedsl.de) |
| 12:25.13 | *** join/#htc-linux ginge_ (n=baz@80.229.188.31) |
| 12:29.39 | ginge_ | OSM doesn't seem very well today |
| 12:31.23 | *** join/#htc-linux LunohoD_ (n=alex@e180067189.adsl.alicedsl.de) |
| 12:37.55 | *** join/#htc-linux axe- (n=axe@217.116.62.236) |
| 13:00.53 | *** join/#htc-linux rob_w (n=bob@Ma1f8.m.pppool.de) |
| 13:01.41 | *** join/#htc-linux LunohoD_ (n=alex@e180065108.adsl.alicedsl.de) |
| 13:10.04 | *** join/#htc-linux rob_w|laptop (n=rob@Ma1f8.m.pppool.de) |
| 13:16.35 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 13:24.19 | *** join/#htc-linux rob_w|lappi (n=rob@M8846.m.pppool.de) |
| 13:29.17 | *** join/#htc-linux drasar (n=maik@77.93.211.13-msol.msol.cz) |
| 13:29.42 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-16d832f2ff262312) |
| 13:32.06 | drasar | BabelO: Hi, I'm back. I've got some new debug info at: http://www.stud.fit.vutbr.cz/~xmichl07/temp/himalaya/. Any suggestions what could be wrong? |
| 13:33.47 | *** join/#htc-linux AstainHellbring (n=Administ@unaffiliated/astainhellbring) |
| 13:39.58 | *** join/#htc-linux rob_w (n=bob@M8846.m.pppool.de) |
| 14:03.10 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 14:14.56 | *** join/#htc-linux paulproteus (n=paulprot@2002:cbb2:8293:0:0:0:0:1) |
| 14:21.26 | *** join/#htc-linux LunohoD_ (n=alex@e180074056.adsl.alicedsl.de) |
| 14:25.03 | joshts0 | ginge: we still need the stuff for the outside buttons huh? |
| 14:34.27 | *** join/#htc-linux axe- (n=axe@217.116.62.236) |
| 14:35.35 | *** join/#htc-linux axe- (n=axe@217.116.62.236) |
| 14:38.31 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d86619b.pool.einsundeins.de) |
| 15:05.30 | *** join/#htc-linux axe- (n=axe@217.116.62.236) |
| 15:07.07 | cr2 | pigeon: i think you'd start with the haretlog.txt for wallaby |
| 15:08.05 | cr2 | pigeon: i think that the SD controller is similar to the asic1/2 on ipaqs. once the SD will work, the rest looks really trivial. |
| 15:08.16 | cr2 | kiozen: still here ? |
| 15:08.37 | kiozen | cr2: yes |
| 15:12.03 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-fb4fd678ffcb5e34) |
| 15:16.58 | cr2 | kiozen: ok, so if we forget about the battery monitor, the charging itself does not work too ? |
| 15:17.10 | kiozen | cr2: yes |
| 15:17.30 | kiozen | cr2: and having no monitor is very irritating |
| 15:19.42 | *** part/#htc-linux zoolooc (n=lucian@nrbg-4dbf8469.pool.einsundeins.de) |
| 15:23.28 | *** join/#htc-linux miknix (n=miknix@81.193.92.33) |
| 15:33.00 | ginge_ | joshts0: yes, we still need the cpld traces. I have a kernel almost ready for you. I have guests tonight but I will get something to you once I have forcefully removed them from my house. |
| 15:38.07 | *** join/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
| 15:40.46 | kiozen | cr2: how are the chances we ever get this to work? |
| 15:43.07 | *** join/#htc-linux key2 (n=key2@193.33.36.20) |
| 15:43.12 | BabelO_ | hi cr2 |
| 15:43.28 | BabelO_ | cr2: i think it is same on artemis, batery measure |
| 15:47.49 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d86619b.pool.einsundeins.de) |
| 16:00.29 | cr2 | kiozen: working on it. |
| 16:01.03 | kiozen | cr2: ok :) tell me if there is anything to do for me |
| 16:01.03 | cr2 | kiozen: have you dumped the cpld gpio set with the battery charged, and battery not charged. |
| 16:01.20 | cr2 | kiozen: i'm interested in the value of gpio83 |
| 16:02.08 | cr2 | ok. we have a list of "battery-related" gpios. we can't know their function, but we can trace the "state machine". and reproduce it for linux. |
| 16:02.41 | cr2 | so we should just dump their states under different conditions. |
| 16:03.09 | cr2 | i found that it's not so easy to follow the charging logic from the .dll disassembly |
| 16:04.35 | *** join/#htc-linux smev (n=smev@S010600215514f029.cg.shawcable.net) |
| 16:05.09 | smev | sup |
| 16:05.16 | *** join/#htc-linux Alex[sp3dev] (n=Alexande@86.110.163.25) |
| 16:06.33 | kiozen | ok, I can do after my son is in bed, |
| 16:07.14 | Alex[sp3dev] | hello, everyone. is compiling mainline kernel for arm the same as hh and HnD? is it enough to export ARCH and CROSS_COMPILE before doing make defconfig and make? |
| 16:07.15 | kiozen | cr2: or let's do it now, :) |
| 16:09.59 | kiozen | cr2: wasn't there a special command for tracing GPIO |
| 16:14.13 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-134f5696fddeb11f) |
| 16:20.22 | cr2 | kiozen: 'dump gpio' and the shadow cpld area dump is enough. |
| 16:22.48 | kiozen | cr2: http://pastebin.no/13148 |
| 16:23.33 | cr2 | 83 I 1 0 |
| 16:23.44 | cr2 | is the battery charged full ? |
| 16:25.43 | cr2 | the wiki data about gpio11 is correct. |
| 16:26.44 | cr2 | kiozen: i'm mainly interested in this pin state: |
| 16:26.47 | cr2 | <PROTECTED> |
| 16:26.59 | cr2 | you can pick it only from the shadow area. |
| 16:27.20 | kiozen | cr2: no battery is charging |
| 16:28.00 | kiozen | cr2: grrr, trying to remember how to dump data at 0xbdb00000 |
| 16:29.16 | kiozen | cr2: wait, the shadow once are at 0xa0025320 right? |
| 16:29.32 | *** part/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
| 16:30.19 | kiozen | cr2: these ones are with power cord |
| 16:30.21 | kiozen | HaRET(7)# pd 0xa0025320 28 |
| 16:30.21 | kiozen | a0025320 | 00000006 00000003 00000001 0000000b | ................ |
| 16:30.21 | kiozen | a0025330 | 00000008 0000000b 00000001 | ............ |
| 16:30.27 | cr2 | yes |
| 16:30.44 | cr2 | 0000000b |
| 16:30.57 | kiozen | cr2: and these are w/o |
| 16:31.00 | kiozen | HaRET(8)# pd 0xa0025320 28 |
| 16:31.00 | kiozen | a0025320 | 00000006 00000000 00000001 00000009 | ................ |
| 16:31.00 | kiozen | a0025330 | 00000008 0000000b 00000001 | ............ |
| 16:31.11 | cr2 | b=1011 |
| 16:31.20 | cr2 | 9=1001 |
| 16:31.29 | cr2 | ok, so it's set. |
| 16:31.46 | cr2 | can you try with AC and USB separately ? |
| 16:32.01 | smev | can anyone recommend a good wm6.1 rom for the kasier (tytn II) ? I need something that runs skype and I would like to play with haret a bit as well |
| 16:32.23 | cr2 | smev: #htc-linux |
| 16:32.37 | kiozen | cr2: with usb |
| 16:32.39 | kiozen | HaRET(9)# pd 0xa0025320 28 |
| 16:32.40 | kiozen | a0025320 | 00000006 00000003 00000001 0000000b | ................ |
| 16:32.40 | kiozen | a0025330 | 00000008 0000000b 00000001 | ............ |
| 16:33.10 | cr2 | kiozen: ok, so it's not charge_rate, but the change enable. |
| 16:33.28 | cr2 | s/change /charge / |
| 16:33.28 | kiozen | cr2: http://pastebin.no/13149 |
| 16:33.50 | kiozen | ok, have to make some dinner, will read with one eye |
| 16:33.53 | cr2 | ok. |
| 16:34.00 | cr2 | i'll check the kernel code. |
| 16:34.12 | cr2 | monitoring is a different issue. |
| 16:35.31 | okias | <PROTECTED> |
| 16:36.48 | dcordes | hi okias |
| 16:37.12 | okias | hi dcordes :-) |
| 16:39.56 | cr2 | kiozen: heh. dump gpio does not show 99 and 107 ;) |
| 16:40.52 | cr2 | kiozen: do you have an old copy of gnu-haret ? or you can run 'watch gpio 1', i think it dumps the gpio state at startup. |
| 16:41.18 | kiozen | ok, ido later.. |
| 16:53.13 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 17:18.37 | *** join/#htc-linux rzr (n=RzR@lav35-1-82-236-136-171.fbx.proxad.net) |
| 17:18.39 | rzr | hi |
| 17:19.02 | rzr | do u ever heard about Agency Series PC10 ? |
| 17:19.43 | rzr | this is an old HTC device see pict : http://rzr.online.fr/q/xscale |
| 17:27.01 | cr2 | rzr: the first thing you should do it to create the earlyharetlog.txt file, and run haret, creating haretlog.txt |
| 17:27.21 | rzr | if only I can boot it :) |
| 17:27.40 | cr2 | coonect the AC cable :) |
| 17:28.08 | cr2 | rzr: haret runs on jornada820, which is a sa1100 based pda. |
| 17:28.28 | cr2 | bbl |
| 17:28.37 | rzr | when I plug in the supply , the sagem logo appear |
| 17:28.44 | rzr | then the device shutdown |
| 17:29.08 | rzr | cr2: ok see ya I am posting on the forum |
| 17:42.45 | *** join/#htc-linux dwaradzyn (n=gudz666@damian8155.net.autocom.pl) |
| 17:43.52 | rzr | http://forum.xda-developers.com/showthread.php?p=2440426#post2440426 |
| 17:55.17 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-67-49-214-162.bak.res.rr.com) |
| 18:04.22 | dwaradzyn | do anyone use eclipse with qemu to debug kernel? |
| 18:09.22 | *** join/#htc-linux exco (n=exco@e181072220.adsl.alicedsl.de) |
| 18:34.29 | kiozen | cr2: http://pastebin.no/13157 |
| 18:34.43 | kiozen | cr2: not sure if that is what you want. |
| 18:38.59 | *** join/#htc-linux pH5 (n=ph5@e178247105.adsl.alicedsl.de) |
| 18:40.05 | *** join/#htc-linux goxboxlive (n=goxboxli@31.84-48-212.nextgentel.com) |
| 18:41.14 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8469.pool.einsundeins.de) |
| 18:47.55 | cr2 | kiozen: try 'wi 0' ? |
| 19:12.45 | *** join/#htc-linux goxboxlive (n=goxboxli@31.84-48-212.nextgentel.com) |
| 19:23.05 | *** join/#htc-linux Othello_ (i=Magorium@gateway/tor/x-90fc5e5286fafc94) |
| 19:31.44 | *** join/#htc-linux OpnSrc1 (i=harisha1@gateway/tor/x-bac11a415db7bcfe) |
| 19:43.54 | *** join/#htc-linux EA2 (n=chipper@cpe-024-074-138-191.carolina.res.rr.com) |
| 19:50.34 | *** join/#htc-linux eTiger13 (n=eddie@67.116.236.221) |
| 19:51.32 | eTiger13 | anyone on here tried on android on the vogue yet? |
| 19:56.00 | dwaradzyn | eTiger13: i have tried it on my polaris, latest version does kernel panic. porting it to polaris is in the works now, latest polaris version has everything that vogue has except booting from sd (but it can mount sd) |
| 19:56.25 | cr2 | dwaradzyn: polaris != vogue |
| 19:57.09 | dwaradzyn | cr2: oh yes i know |
| 19:57.56 | AstainHellbring | huge difference there too as polaris gsm vogue cdma |
| 19:58.59 | dwaradzyn | but in terms of running android the only difference between polaris and vogue is that vogue can boot from sd |
| 20:01.45 | AstainHellbring | kinda but not really different base chipset too |
| 20:03.35 | cr2 | dwaradzyn: i think kaiser can boot off SD too |
| 20:04.27 | cr2 | AstainHellbring: there are some differences in the non-phone part. or at least in the wince config part. |
| 20:06.07 | ginge | kaiser sd is flakey as best |
| 20:06.27 | dwaradzyn | cr2: polaris could boot from sd as well. but there is no ready to run initrd and rootfs for polaris yet |
| 20:07.33 | cr2 | dwaradzyn: ok. is it that different from kaiser, that you can't use kaiser rootfs ? |
| 20:07.43 | ginge | dwaradzyn: you could try the dzo initrd and android to boot from polaris sd |
| 20:07.55 | ginge | works for kaiser |
| 20:07.56 | kiozen | cr2: http://pastebin.no/13164 |
| 20:07.58 | cr2 | dwaradzyn: sorry. it's about android. |
| 20:08.21 | cr2 | kiozen: hmm. not gpios too |
| 20:08.30 | cr2 | kiozen: mmutrace ? |
| 20:08.53 | cr2 | kiozen: there is some option in the mainline haret that dumps the gpio state. |
| 20:09.02 | cr2 | but i forgot which one. |
| 20:09.23 | drasar | cr2: Hi, I have put some debug files about my problem with usb gadget at: http://www.stud.fit.vutbr.cz/~xmichl07/temp/himalaya/. All files are from himalaya, on PC is no event about connection. Can you look at it please? |
| 20:10.09 | dwaradzyn | ginge: cr2: i will try, i think it should work |
| 20:10.28 | *** join/#htc-linux eTiger13 (n=eddie@67.116.236.221) |
| 20:10.54 | cr2 | imalaya udc register |
| 20:11.14 | cr2 | drasar: No valid DiskOnChip devices found |
| 20:11.44 | cr2 | drasar: you can make some changes here. imvho it should work, once you'll add the right address. |
| 20:12.08 | cr2 | <6>116x: driver isp116x-hcd, 03 Nov 2005 |
| 20:12.09 | cr2 | <6>sl811: driver sl811-hcd, 19 May 2005 |
| 20:12.14 | cr2 | this is not needed |
| 20:12.25 | cr2 | drasar: are you using the hh.org CVS defconfig ? |
| 20:13.02 | cr2 | <6>usbcore: registered new interface driver cdc_acm |
| 20:13.03 | cr2 | <6>drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters |
| 20:13.30 | cr2 | you'd remove all these fancy drivers, and leave only usb_storage and cdc_ether |
| 20:13.41 | kiozen | cr2: do the gpios have an address? |
| 20:13.50 | cr2 | kiozen: yes. |
| 20:14.10 | cr2 | kiozen: can't you take an old gnu-haret or hx4700 haret ? |
| 20:14.24 | kiozen | cr2: where? |
| 20:15.26 | drasar | cr2: Yes, I'm using "make htchimalaya_defconfig" |
| 20:18.28 | cr2 | drasar: ok. |
| 20:18.33 | cr2 | kiozen: looking |
| 20:19.00 | cr2 | kiozen: http://www.sdgsystems.com/pub/ipaq/hx4700/starterkit/20050611/ |
| 20:20.36 | cr2 | drasar: don't see anything suspicious. you may modify the usb config to match the blueangel code. if it helps. |
| 20:20.55 | cr2 | drasar: i don't have my hima here, so can't really help with testing. |
| 20:21.58 | drasar | cr2: ...and g_ether isn't necessary? |
| 20:22.43 | cr2 | drasar: necessary :) |
| 20:23.30 | drasar | cr2: So, should I leave only g_ether and usb_storage? |
| 20:23.44 | kiozen | cr2: that does not know watch gpio, only wgpio |
| 20:25.04 | cr2 | kiozen: 'dump gpio' |
| 20:25.22 | cr2 | drasar: yes. |
| 20:25.51 | kiozen | cr2: ok, http://pastebin.no/13169 |
| 20:26.02 | kiozen | w/o ac |
| 20:26.06 | drasar | cr2: ok, and as modules or both compile to the kernel? |
| 20:26.42 | kiozen | cr2: http://pastebin.no/13170 |
| 20:26.45 | kiozen | with ac |
| 20:26.52 | dwaradzyn | ginge: i tried vogue initrd + images on sdcard and it does not boot of sd card. it ended up with message "cannot mount /dev/block/mmcblk0p1 on /sdcard". it gave me busybox console and i was able to manually mount /sdcard |
| 20:26.54 | pH5 | drasar: g_ether and g_file_storage are gadget drivers for the device (hima) side, cdc_ether and usb_storage are the corresponding drivers for the host (your pc). |
| 20:27.16 | pH5 | drasar: if you compile them into the kernel, you can (currently) only use one of g_ether or g_file_storage |
| 20:27.26 | ginge | dwaradzyn: did it sa why it cant mount it? |
| 20:27.43 | dwaradzyn | ginge: No such device |
| 20:27.44 | pH5 | drasar: until you're sure you have proper module loading support in userspace, I'd start with compiling g_ether into the kernel. |
| 20:27.58 | kiozen | cr2: http://pastebin.no/13171 |
| 20:28.00 | kiozen | with usb |
| 20:28.08 | *** join/#htc-linux eTiger13_ (n=eddie@67.116.236.221) |
| 20:28.17 | ginge | dwaradzyn: bit odd considering you mounted it manually |
| 20:28.45 | dwaradzyn | ginge: that is exactly what i think of it: it should not happen |
| 20:28.53 | cr2 | 99 O 1 0 |
| 20:28.55 | cr2 | 107 O 0 0 |
| 20:29.25 | cr2 | kiozen: with AC ? |
| 20:29.25 | cr2 | kiozen: and without AC and USB |
| 20:29.25 | kiozen | 1st without ac |
| 20:29.32 | dwaradzyn | ginge: maybe i should modify initrd and input some "sleep 5" before sd mount ? |
| 20:29.33 | kiozen | 2nd with AC |
| 20:29.37 | kiozen | 2rd with usb |
| 20:29.42 | ginge | dwaradzyn: good plan |
| 20:29.44 | cr2 | ah.ok. |
| 20:29.49 | kiozen | s/2rd/3rd/ |
| 20:30.29 | cr2 | kiozen: ok, i'll make a patch now. |
| 20:30.57 | cr2 | kiozen: let's hope it will change. but the monitoring is a different issue. |
| 20:31.11 | kiozen | ok |
| 20:32.24 | drasar | pH5: On PC I have usb_storage, cdc_subset and usbnet. It should be enough because if I use xanadux 2.6.12 on hima, connection between PC and hima works |
| 20:33.41 | drasar | pH5: So I need to solve problem with 2.6.21-hh20 on hima, it doesn't work |
| 20:34.38 | drasar | pH5: I'll try only modules mentioned above ;) |
| 20:36.20 | dwaradzyn | ginge: it has: mount -t msdos /dev/blo... |
| 20:36.41 | dwaradzyn | ginge: it should be mount -t vfat .... |
| 20:36.46 | ginge | dwaradzyn: yeah. I changed mine to vfat, might help |
| 20:36.58 | dwaradzyn | and yes it has sleep 1 before mount :) |
| 20:37.38 | drasar | pH5 & cr2: Should I compile "Use GPIOs to control pxa2xx_udc driver" into kernel on hima? |
| 20:38.55 | pH5 | drasar: yes, but that's not all there is to it. did you also copy the pxa2xx_udc_gpio_info and pxa2xx-udc-gpio platform device definition from blueangel? |
| 20:39.57 | pH5 | (the two structs after the /* UDC device */ comment, the platform device has to be registered in the devices[] list below) |
| 20:42.34 | drasar | pH5: I have downloaded CVS source 2.6.21-hh20, then "make htchimalaya_defconfig" and that's all. |
| 20:43.46 | drasar | pH5: Where can I find these definitions? |
| 20:44.39 | dwaradzyn | ginge: it worked, but now it failed with losetup data.img |
| 20:44.59 | ginge | no loopback in kernel? |
| 20:45.12 | dwaradzyn | ginge: it is only a matter of lowercase/uppercase, the file is named DATA.IMG |
| 20:45.18 | ginge | dwaradzyn: ahh |
| 20:46.13 | cr2 | kiozen: updating. |
| 20:47.03 | *** join/#htc-linux eTiger13 (n=eddie@67.116.236.221) |
| 20:47.47 | cr2 | kiozen: cvs up |
| 20:48.17 | cr2 | kiozen: and tell me what do you see in the dmesg buf on connecting/disconnecting ac/usb |
| 20:48.17 | pH5 | drasar: they are in arch/arm/mach-pxa/htcblueangel/blueangel.c. you have to transplant them into arch/arm/mach-pxa/htchimalaya/himalaya.c |
| 20:49.11 | drasar | pH5: ok, thx |
| 20:49.16 | cr2 | kiozen: we should add the gpio11 direction too, but i don't know where it is used. |
| 20:58.02 | dwaradzyn | ginge: i converted filenames to lowercase, but "losetup /dev/block/loop0 /sdcard/data.img" still outputs "No such device or address" |
| 20:58.24 | ginge | anything in dmesg? |
| 20:59.28 | dwaradzyn | ginge: /dev/block/loop0 exists, /sdcard/data.img exists, losetup -f (show first free loop device) outputs /dev/block/loop0 |
| 20:59.42 | dwaradzyn | nothing in dmesg, last messages are about mmc0 |
| 21:00.25 | *** join/#htc-linux kiozen_ (n=oeichler@rgnb-5d86619b.pool.einsundeins.de) |
| 21:00.48 | dwaradzyn | ginge: i will try to user mount -o loop instead of losetup |
| 21:00.58 | ginge | yeah, was gonna suggest |
| 21:01.44 | kiozen_ | cr2: |
| 21:01.47 | kiozen_ | [ 239.980000] udc: USB reset |
| 21:01.47 | kiozen_ | [ 240.000000] set_charge: usb=0 ac=1 |
| 21:01.47 | kiozen_ | [ 240.000000] egpio set: reg 3 = 0x0006 |
| 21:01.47 | kiozen_ | [ 240.160000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset |
| 21:01.47 | kiozen_ | [ 275.090000] set_charge: usb=1 ac=0 |
| 21:01.48 | kiozen_ | [ 275.090000] egpio set: reg 3 = 0x0006 |
| 21:02.04 | kiozen_ | hm, last change is AC on |
| 21:02.45 | kiozen_ | yes it's just vice versa |
| 21:02.48 | kiozen_ | 0 is on |
| 21:02.52 | kiozen_ | 1 is off |
| 21:03.40 | dwaradzyn | ginge: mount: cannot setup loop device: No such file or directory |
| 21:03.46 | kiozen_ | cr2: does this mean battery is charging now? |
| 21:03.58 | kiozen_ | cr2: and does it stop when full? |
| 21:04.11 | dwaradzyn | ginge: mkdir /d1; mount -o loop /sdcard/data.img /d1 |
| 21:04.17 | kiozen_ | cr2: guess not |
| 21:04.28 | ginge | dwaradzyn: that worked? |
| 21:05.28 | dwaradzyn | ginge: no, it does not work. first message was output of mount, and second was the command i executed |
| 21:05.42 | ginge | ah, ok |
| 21:06.43 | ginge | joshts0: you there? |
| 21:09.23 | dwaradzyn | ginge: losetup /dev/block/loop0 gives "No such device or address". i'm stuck |
| 21:09.47 | ginge | dwaradzyn: and each time you do that you dont see any more demsg output? |
| 21:10.20 | joshts0 | yep |
| 21:10.42 | ginge | joshts0: that trace you did on the keyboard... is that all you saw? |
| 21:11.21 | dwaradzyn | ginge: no there is nothing new in dmesg |
| 21:11.28 | drasar | pH5: It is necessary to make some changes in that structures or rename them? |
| 21:11.49 | ginge | dwaradzyn: thats extremely confusing. Are we sure the kernel has loop support? |
| 21:12.13 | joshts0 | ginge: yes, well.. what do you mean? |
| 21:12.15 | dwaradzyn | ginge: i'll check my config |
| 21:12.39 | ginge | joshts0: did you have to supress lots of ibits, or just a couple/ |
| 21:12.48 | joshts0 | oh, just one or two tops |
| 21:13.16 | ginge | joshts0: damn |
| 21:13.33 | ginge | joshts0: looks like I need to so some heavy rewriting :/ |
| 21:13.58 | joshts0 | (looks like i did ibit gpios 203 and that was that...) |
| 21:14.08 | dwaradzyn | ginge: kernel didn't have loopback support. i was confused by /dev/block/loop0 presence... |
| 21:14.24 | dwaradzyn | ginge: will report back after 5 mins |
| 21:14.28 | ginge | dwaradzyn: easy mistake to make. the loop is hardcoded into the initrd |
| 21:14.49 | ginge | joshts0: will you have some time later to run a couple of kernel tests on this? |
| 21:14.59 | pH5 | drasar: renaming s/blueangel_udc/himalaya_udc/ is not needed, but makes a whole lot of sense. |
| 21:15.27 | pH5 | what _needs_ to be changed though is the detect and power gpio numbers (or rather these strange device + number pairs that are used because 2.6.21-hh20 still has the gpiodev code) |
| 21:15.30 | *** join/#htc-linux wasup (n=wasup@208.47.103.106) |
| 21:15.51 | wasup | hey ginge did u port that keyboard yet? |
| 21:15.57 | joshts0 | haha |
| 21:15.59 | ginge | lol |
| 21:16.01 | joshts0 | we are talking about that right now literally |
| 21:16.17 | joshts0 | ginge: probably.. im in and out all day. send me a message and ill probably resond |
| 21:16.24 | ginge | joshts0: okay |
| 21:16.37 | wasup | hahaha |
| 21:17.28 | wasup | so how is it going? |
| 21:17.54 | joshts0 | he just asked if i woudl be available to do some testing later, so its going.. |
| 21:18.08 | drasar | pH5: In himalaya.c is "static struct platform_device himalaya_udc = { .name = "himalaya-udc", };" Should I comment it? |
| 21:19.41 | drasar | pH5: and the list that you mean is "static struct platform_device *himalaya_asic3_devices[] __initdata = {"? |
| 21:20.23 | wasup | oh... well if u guys need any more testers or anything |
| 21:20.24 | pH5 | if you want to use the pxa2xx-udc-gpio instead, yes. and no, the device list is even below that. |
| 21:20.27 | wasup | just let me know |
| 21:20.47 | ginge | wasup: okay, another victim ;) |
| 21:21.18 | joshts0 | ginge: can youe xplain to him what you need me to get for the HW keys? maybe he coudl get it since i havent figured it out yet... |
| 21:21.28 | joshts0 | for the other hw keys* |
| 21:21.46 | ginge | joshts0: i think that can wait until we get the basic structure in. |
| 21:21.55 | joshts0 | kk |
| 21:22.04 | wasup | im all ears.. and i have way too much time on my hands.. i sit at a desk all day |
| 21:22.12 | ginge | wasup: :) |
| 21:22.20 | joshts0 | dont we all ;) |
| 21:22.44 | joshts0 | wells it at ad esk all day ;) i could use some more time on my hands.. |
| 21:23.02 | wasup | hahaha |
| 21:23.05 | pH5 | drasar: so I guess you should put GPIO_NR_HIMALAYA_USB_DETECT_N and ASIC3_GPIOA_IRQ_BASE + GPIOA_USB_PUEN in the place of .detect_gpio and .power_gpio and replace the current himalaya_udc with the one from blueangel. |
| 21:27.40 | drasar | pH5: ok, I've got it. Anything else? |
| 21:30.09 | pH5 | nope, as you are replacing the himalaya_udc that is there already, it should also be already listed in the devices[] list in the bottom. |
| 21:31.28 | dwaradzyn | ginge: losetup works, now it fails on 18 line of /init. the line is "mount -t ext3 /dev/block/loop0 /data" |
| 21:31.51 | ginge | can you rephrase it to see it it makes a difference? |
| 21:31.52 | dwaradzyn | ginge: "No such device" |
| 21:32.00 | drasar | pH5: yes, it is |
| 21:32.02 | ginge | dwaradzyn: ?!? |
| 21:32.18 | dwaradzyn | ginge: i'll try |
| 21:33.16 | dwaradzyn | ginge: the output of 18th line with mount was "No such device" |
| 21:33.59 | ginge | dwaradzyn: so mount -o loop /sdcard/data.img /data doesn't work either |
| 21:34.19 | pigeon | cr2: yup, will do, i was try haret with it on the weekend and at least it's booting a kernel alright. |
| 21:34.54 | dwaradzyn | ginge: it does not work neither |
| 21:35.06 | ginge | dwaradzyn: damn |
| 21:35.38 | *** part/#htc-linux okias (i=ejabberd@poseidon.kraja.cz) |
| 21:35.54 | dwaradzyn | ginge: i added only loopback support to kernel. should i add loopcryto support also? |
| 21:36.03 | ginge | joshts0: can you do an irq trace with the keyboard please |
| 21:36.11 | ginge | dwaradzyn: no, don't need that |
| 21:36.11 | cr2 | pigeon: interesting. |
| 21:36.39 | ginge | dwaradzyn: make sure you have ext2/3 and the relevant codepages etc |
| 21:36.40 | cr2 | pigeon: can you pastebin the haretlog.txt. we can add wallaby autodetection to haret |
| 21:36.42 | drasar | pH5: so what next? |
| 21:36.58 | wasup | hey i downloaded haretconsole how do i make it of use? |
| 21:37.03 | pigeon | cr2: yup, but i'll have to do it later today/tonight. |
| 21:37.13 | ginge | wasup: you'll do ;) |
| 21:37.16 | cr2 | pigeon: i've made some changes to the wallaby wiki, it seems we may need more. |
| 21:37.20 | cr2 | pigeon: ok. |
| 21:37.23 | ginge | I need the irqs for the keyboard |
| 21:37.35 | ginge | wasup: have you used haret before? |
| 21:38.07 | cr2 | pigeon: the most unpleasant change will the the sa1100fb adaptation for platform_driver api ;) |
| 21:38.43 | ginge | wasup: if you start haret and run haretconsole I can get you through grabbing what we need |
| 21:39.03 | pigeon | cr2: what's the platfrom_driver api? |
| 21:39.57 | cr2 | pigeon: you can supply the sa1100fb (driver) parameters via platform_driver infrastructure, and not hardcode them into sa1100fb directly. |
| 21:40.10 | cr2 | pigeon: it's also needed for suspend/resume. |
| 21:40.35 | cr2 | btw, you'd dump ipl, so we may look for the resume path. i think i don't have the bootloader here. |
| 21:41.38 | pigeon | ipl? |
| 21:41.51 | pigeon | and, did you mean the original bootloader on the device? |
| 21:42.10 | cr2 | pigeon: i remember looking at the SD driver disassembly, but i couldn't make any fast progress, so i've given up at that time. |
| 21:42.13 | cr2 | yes. |
| 21:42.49 | cr2 | pigeon: pwf wipl 0x0 0x40000 |
| 21:43.07 | pigeon | ah, i still have the bootloader dumped, and also in assembler from someone, with some annotation. |
| 21:43.17 | cr2 | nice. |
| 21:43.57 | pigeon | he was one of the guys from xda-developers ages ago. |
| 21:43.58 | cr2 | you may try to trace the serial port for the full AT command log |
| 21:44.48 | cr2 | pigeon: http://wiki.xda-developers.com/index.php?pagename=WallabyGPIO |
| 21:45.01 | cr2 | looks very simple compared to the modern phones :) |
| 21:46.08 | cr2 | http://wiki.xda-developers.com/index.php?pagename=WallabyTouchScreen |
| 21:46.15 | cr2 | looks like bitbang spi |
| 21:46.19 | cr2 | does the TS work ? |
| 21:46.43 | cr2 | hmm. i need to check the hw list. |
| 21:46.52 | pigeon | i haven't gone that far yet. |
| 21:47.48 | cr2 | it must have something in common with asic1/asic2 |
| 21:47.59 | pigeon | cr2: looks like i'll have to bug^H^H^Hask you for help in the future :) |
| 21:48.01 | cr2 | which have ADC and spi port afair. |
| 21:48.22 | cr2 | yeah, it's the first htc phone, we need to make it work :) |
| 21:48.31 | pigeon | do you have a wallaby? |
| 21:48.37 | cr2 | a question of honour. |
| 21:48.42 | cr2 | no, only himalaya. |
| 21:48.54 | cr2 | as the oldest device. |
| 21:48.54 | pigeon | ah |
| 21:49.34 | wasup | i hit listen for network connection |
| 21:49.36 | cr2 | wallaby should be easy to finish. compared to the modern monster device. |
| 21:49.58 | wasup | but which python script do i open up to connect to it?? |
| 21:50.14 | dwaradzyn | ginge: finally it boots |
| 21:50.22 | *** join/#htc-linux AstainHellbring (n=Administ@c-67-164-195-234.hsd1.ut.comcast.net) |
| 21:50.29 | ginge | dwaradzyn: what was the problem? |
| 21:50.37 | dwaradzyn | ginge: no ext3 in kernel |
| 21:50.42 | ginge | dwaradzyn: d'oh |
| 21:50.53 | ginge | wasup: ./console ip-address |
| 21:51.23 | dwaradzyn | ginge: now it failed with modem init and i see some stacktrace |
| 21:51.41 | ginge | dwaradzyn: stacktrace is what I see in kaiser sd when booting from loop |
| 21:51.50 | ginge | msmsdcc_datamover |
| 21:52.11 | *** join/#htc-linux meredydd (n=meredydd@cpc4-cmbg2-0-0-cust471.cmbg.cable.ntl.com) |
| 21:52.36 | wasup | console wont run? do i have to be inside python? |
| 21:52.43 | wasup | im completely lost. |
| 21:53.00 | ginge | wasup: python console ip |
| 21:53.33 | dwaradzyn | ginge: so it does not boot completely on kaiser? |
| 21:53.50 | ginge | dwaradzyn: we can boot from a native ext2 but not loop |
| 21:53.58 | ginge | dwaradzyn: some irq related issue |
| 21:54.52 | dwaradzyn | ginge: can you make more than one partition on sdcard, so linux will use one and windows mobile will use other ? |
| 21:54.53 | wasup | should i run it on my mac? |
| 21:55.06 | wasup | cause python is erroring |
| 21:55.26 | ginge | dwaradzyn: yes, you will need to edit the initrd to point to the new partitions and also create the block devices |
| 21:55.42 | ginge | wasup: you can try |
| 21:55.52 | ginge | wasup: failing that we can use telnet |
| 21:56.02 | dwaradzyn | ginge: lets try it then |
| 21:56.16 | ginge | dwaradzyn: if you give me a moment I can send over my modified initrd |
| 21:57.14 | dwaradzyn | if only the mounting will be different i should handle that little modification |
| 21:57.46 | ginge | dwaradzyn: up to you. heres mine http://www.headfuzz.co.uk/files/android/initrd.gz |
| 21:58.06 | ginge | I have it set up as 2 partitions one for data one for system |
| 21:58.19 | ginge | then I just dd'ed the img files into the partition |
| 21:59.42 | dwaradzyn | ginge: mmcblk0p1 = fat for windows mobile, mmcblk0p2 = data.img, mmcblk0p3 = system.img ? |
| 22:00.17 | ginge | dwaradzyn: cant remember which way I have mine set up off hand. if you are doing your own then it doesn't really matter |
| 22:01.43 | joshts0 | gine; here now, got everythign? |
| 22:01.59 | joshts0 | ginge.. |
| 22:02.11 | ginge | wasup is having a hard time with haretconsole we need the IRQs tracing if you have a moment |
| 22:02.43 | wasup | hey i got it to work.. |
| 22:02.58 | ginge | wasup: fight amongst yourselves ;) |
| 22:03.52 | wasup | hmmm... trying to find ip |
| 22:04.11 | dwaradzyn | ginge: i am really suprised that windows mobile can handle more than one partition. i tried that on pendrive and windows xp couldn't read from it if it had more than one partition |
| 22:04.38 | ginge | dwaradzyn: work ok for me, pendrive and all |
| 22:04.38 | dwaradzyn | fu** gparted failed, i think i've lost my 8gb card contents |
| 22:04.50 | joshts0 | wasup: lemme know if you dont got it and i can try |
| 22:05.11 | dwaradzyn | ginge: it worked ok under linux, but i couldnt make it work under xp |
| 22:05.12 | joshts0 | ginge: you are wanting the output from wirq when pressing keyboard keys? i dont think i was ever able ot get naything useful coming out of wirq when pressing nay butotns.. |
| 22:05.20 | ginge | argh! |
| 22:05.32 | joshts0 | sounds like you have 7 things goin gon ;o |
| 22:05.41 | ginge | joshts0: as per usual ;) |
| 22:07.02 | *** join/#htc-linux goxboxlive (n=goxboxli@31.84-48-212.nextgentel.com) |
| 22:07.05 | *** join/#htc-linux NiZoX (n=none@2a01:e35:8a13:a2b0:21c:c0ff:fe25:ff68) |
| 22:07.05 | *** join/#htc-linux effbiai (n=effbiai@idarlund.openvpn.hive.no) |
| 22:07.05 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
| 22:07.05 | *** join/#htc-linux key2 (n=key2@193.33.36.20) [NETSPLIT VICTIM] |
| 22:07.05 | *** join/#htc-linux meredydd (n=meredydd@cpc4-cmbg2-0-0-cust471.cmbg.cable.ntl.com) [NETSPLIT VICTIM] |
| 22:07.07 | ginge | ?? |
| 22:07.13 | ginge | joshts0: no irqs generated at all? |
| 22:07.29 | joshts0 | im checking again.. |
| 22:07.44 | ginge | you might need to supress some to see them |
| 22:08.39 | wasup | ok... how do i find the ip |
| 22:08.49 | ginge | wasup: look in your dhcp server |
| 22:09.02 | ginge | assuming wireless |
| 22:09.14 | wasup | im using my wifi |
| 22:09.24 | ginge | wasup: yeah check your server/router |
| 22:09.30 | joshts0 | ginge: irq 28 ;) so should i jsut runs ome things and give you what it says? |
| 22:09.30 | wasup | i went to ipchicken |
| 22:09.46 | ginge | wasup: ipwhatnow? |
| 22:09.55 | ginge | joshts0: is it the same irq for all keys? |
| 22:10.11 | ginge | wasup: you can also get the ip from windows mobile |
| 22:10.57 | joshts0 | gotta reboot again ;) just pressed enter on boot linux while in haret ;) .. so it looks like tis 28 for all keys on the main keyboard, yes.. so far at least |
| 22:11.02 | ginge | wasup: comm manager, wireless settings, advanced |
| 22:12.30 | wasup | k... |
| 22:12.33 | wasup | just a sec |
| 22:13.08 | joshts0 | ginge; yes all the keyboard keys are irq 28 |
| 22:13.41 | ginge | joshts0: any front hardware keys or scrolly type buttons that give different irq? |
| 22:14.15 | wasup | k |
| 22:14.17 | wasup | im in |
| 22:14.41 | joshts0 | ginge: i only supressed irq 19 that was flooding, and it doesnt print any irqs when i press any of the outside hardware keys |
| 22:14.56 | ginge | joshts0: arrow keys? |
| 22:15.36 | joshts0 | actual arrow keys athat are on the keyboard are irq 28 also for sure. the outside arrow keys (not arrow keys, the outside DPAD ) produces no changes when running wirq.. |
| 22:17.03 | ginge | joshts0: okay, good. |
| 22:17.26 | wasup | i pressed the outside thing and my screen started going crazy |
| 22:17.46 | ginge | wasup: which outside thing? |
| 22:18.06 | wasup | the circle thing.. up down left right |
| 22:18.16 | wasup | irql 19 is going pyscho.. but thats normal right? |
| 22:18.16 | ginge | wasup: ah, working then |
| 22:18.22 | ginge | yeah, normal |
| 22:18.25 | wasup | lol |
| 22:18.42 | ginge | you can ignore it with ibit irqs 19 |
| 22:19.25 | wasup | down on the circle thing gives me irql 6 |
| 22:19.46 | ginge | same for up/left/right? |
| 22:19.54 | wasup | up irql 3 |
| 22:20.12 | wasup | left irql 6 |
| 22:20.22 | wasup | right irql6 |
| 22:20.57 | ginge | brb |
| 22:21.00 | wasup | all irql 6 except down gives me 3 sometimes |
| 22:21.20 | ginge | can you press and hold see wht happens |
| 22:21.53 | wasup | k just a sec |
| 22:23.27 | joshts0 | nah im prett sure irq 3 adn 6 simply print across if you do nothing at all |
| 22:29.17 | ginge | joshts0: does the dpad work in android? |
| 22:29.37 | ginge | joshts0: wait... you had to do that odd key sequence, what was that again? |
| 22:32.39 | ginge | wasup: looks like that dpad is also on the asic |
| 22:32.45 | ginge | s/asic/cpld/ |
| 22:33.35 | dcordes | ello |
| 22:33.55 | dcordes | what's up? |
| 22:34.43 | dcordes | dwaradzyn: try testdisk if you lost your partition table |
| 22:34.54 | ginge | dcordes: hiya |
| 22:35.28 | joshts0 | ginge; right and m |
| 22:35.34 | joshts0 | no, left and m |
| 22:36.14 | ginge | which key does that generate in android? |
| 22:38.05 | joshts0 | umm it brings up the menu in google browser to "go to" or "history" or etc, and it brings up the menu to add contacts and etc in the contact manager.. |
| 22:45.03 | Marajin | allo allo allo |
| 22:45.29 | wasup | im pretty sure they are 6 |
| 22:46.10 | wasup | cause if i dont disable 19 it keeps coming up but it interrrupts with 6 when i press the button |
| 22:48.38 | *** join/#htc-linux ellisway (n=ellis@80-46-67-47.static.dsl.as9105.com) |
| 22:49.02 | dwaradzyn | dcordes: i've lost partition contents |
| 22:49.15 | dcordes | try photorec |
| 22:49.48 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 22:49.56 | dwaradzyn | dcordes: i have already recovered sd from backup |
| 22:50.15 | dwaradzyn | dcordes: testdisk saved many lives on this earth :) |
| 22:50.27 | dcordes | also mine |
| 22:50.44 | dwaradzyn | mine about 10 times :) |
| 22:52.02 | dwaradzyn | ginge: i have two ext3 partitions, modified initrd to mount them on /data and /system (mount works), but it hanged on " A N D R O I D" |
| 22:52.22 | ginge | hang solid? |
| 22:52.52 | dwaradzyn | ginge: nope, i can use onscreen keyboard |
| 22:53.29 | ginge | dwaradzyn: how odd |
| 22:53.40 | dcordes | dwaradzyn: you have a polaris, right? |
| 22:53.50 | dwaradzyn | ginge: i can only make the keyboard appear/disappear, none of the keys have any effect |
| 22:53.53 | ginge | joshts0: wasup: kernel1 test coming up... http://www.headfuzz.co.uk/files/android/zImage-titan |
| 22:53.54 | dwaradzyn | dcordes: yes polaris |
| 22:54.20 | ginge | dwaradzyn: you could try enabling debugging for mmc in the kernel |
| 22:55.22 | Marajin | ginge: dcordes: Morning ;) |
| 22:55.22 | dwaradzyn | ginge: in source or in menuconfig? |
| 22:55.22 | ginge | Marajin: morning |
| 22:55.22 | dcordes | Marajin: just got up :) ? |
| 22:55.30 | Marajin | dcordes: Yeah I went to sleep at about 3pm |
| 22:55.33 | AstainHellbring | nice ginge titan kernel what all should that have? |
| 22:55.33 | dcordes | ..morning |
| 22:56.00 | Marajin | ginge: I guess you finally managed to launch your guests through th door huh? =) |
| 22:56.00 | dwaradzyn | ginge: i got it: menuconfig MMC debugging |
| 22:56.03 | ginge | AstainHellbring: sorry, i don't understand |
| 22:56.07 | ginge | head explodes |
| 22:56.19 | AstainHellbring | lol sorry what should that titan kernel support? |
| 22:56.34 | ginge | AstainHellbring: all that you get through vogue + possibly keyboard ;) |
| 22:56.55 | AstainHellbring | ahh ok cool |
| 22:57.13 | ginge | Marajin: ;) yeah, I was getting withdrawn |
| 22:57.46 | ginge | titan guys can someone test on a console image please |
| 22:58.32 | AstainHellbring | sure ginge |
| 22:58.37 | AstainHellbring | I'll download now and try it |
| 22:59.06 | dcordes | ginge: did you make a local vogue kernel plus titan keyboard? |
| 22:59.14 | ginge | dcordes: yeah |
| 22:59.23 | dcordes | is dzo at 25? |
| 22:59.29 | AstainHellbring | hmm trying to download that just goes right to the binary data |
| 22:59.45 | dcordes | AstainHellbring: wget |
| 22:59.47 | Marajin | ginge: Ah the social skills of the geek were tested huh? |
| 22:59.48 | ginge | wget |
| 23:00.29 | ginge | Marajin: heh. not my guests. I had a house full of women. I wanted to kill myself by caving my head in with the nearest thing to me |
| 23:01.15 | ginge | Marajin: which irritatatingly was a heat magazine :/ |
| 23:01.31 | Marajin | ginge: Poor bugger... |
| 23:01.38 | ginge | weeps |
| 23:01.39 | wasup | k downloading it now... whats the difference in this one? |
| 23:01.49 | Marajin | dwaradzyn: How's the polaris support at the moment? |
| 23:02.01 | ginge | wasup: keyboard should dump some useful output when you run it |
| 23:02.05 | ginge | at a stretch it may wor |
| 23:02.12 | ginge | s/wor/work/ |
| 23:02.44 | dwaradzyn | Marajin: everything works as on vogue except booting from sd |
| 23:03.14 | ginge | Marajin: we get the same backtrace on kaiser |
| 23:03.41 | Marajin | dwaradzyn: You say "booting" from SD? it can read SD but not boot from? |
| 23:03.48 | dwaradzyn | ginge: i've booted kernel with mmc debug enabled and it still hangs on " A N D R O I D" |
| 23:03.55 | ginge | no mmc output? |
| 23:04.06 | dwaradzyn | ginge: no output |
| 23:04.09 | ginge | damn |
| 23:04.09 | dcordes | s/booting/booting android/ |
| 23:04.10 | AstainHellbring | can I get link for console image again? |
| 23:04.11 | dcordes | :) |
| 23:04.12 | dwaradzyn | Marajin: exactly |
| 23:04.34 | ginge | http://linuxtogo.org/~lgorris/kaiser-bootkit/angstrom.bin |
| 23:04.43 | *** join/#htc-linux eTiger13 (n=eddie@67.116.236.221) |
| 23:04.48 | ginge | brb |
| 23:04.50 | AstainHellbring | thx |
| 23:05.37 | dwaradzyn | ginge: i think mounting with loop made it further. there was modem init things before stacktrace. now it only gets to " A N D R O I D" |
| 23:06.06 | dwaradzyn | ginge: it does not manage to get to modem initialization |
| 23:06.14 | Marajin | I have a friend looking to get herself a HTC device, said she's considering the polaris =) |
| 23:06.38 | wasup | failed to load file \storage card\initrd? |
| 23:06.41 | wasup | cant be good? |
| 23:07.47 | dcordes | wasup: check initrd filename in default.txt |
| 23:07.48 | dwaradzyn | Marajin: polaris will be able to boot linux and android in no time |
| 23:07.58 | Marajin | dwaradzyn: Nice :) |
| 23:08.10 | AstainHellbring | well it spits some stuff out ginge |
| 23:08.50 | dwaradzyn | Marajin: it does boot both of them right now. i meant i will almost fully support wifi and other stuff in about a month |
| 23:09.10 | Marajin | cool =) |
| 23:09.47 | ginge | dwaradzyn: yeah modem init is for CDMA |
| 23:09.53 | dwaradzyn | ginge: what is this angstrom.bin, it is 15mb not 6mb |
| 23:10.01 | ginge | AstainHellbring: when you press a key? |
| 23:10.14 | ginge | dwaradzyn: its the console image with loads of stuf in it |
| 23:10.22 | dwaradzyn | ginge: is there a system.img working for kaiser |
| 23:10.39 | wasup | i did |
| 23:10.41 | AstainHellbring | ginge yes |
| 23:10.41 | dwaradzyn | ginge: android.bin: i like it |
| 23:10.43 | wasup | still says the same.. |
| 23:10.53 | ginge | dwaradzyn: not really, I can't get it to boot properly on .24 and not much better on .25 |
| 23:11.26 | joshts0 | ginge: im back.. |
| 23:11.28 | ginge | dwaradzyn: android.bin is the ramdisk image. you can write that one out to 1 partition i fyou want |
| 23:11.39 | AstainHellbring | ginge when I press R it says CFDEE and repeats E till I let it go then it spits out kaiser_kbd: kaiser_kbd_irq_handler () |
| 23:11.51 | ginge | AstainHellbring: try typing ls and pressing enter |
| 23:11.59 | ginge | AstainHellbring: oh :/ |
| 23:12.22 | ginge | AstainHellbring: well the keys are being scanned. I must have miscalculated somewhere |
| 23:12.34 | wasup | joshts0: you have a titan right? |
| 23:12.41 | dwaradzyn | ginge: i'm using udK diamong r3. its bootrate is very good |
| 23:12.45 | AstainHellbring | wasup josh and I do |
| 23:12.55 | wasup | oh ok... |
| 23:12.58 | ginge | dwaradzyn: never had a problem with booting |
| 23:13.21 | ginge | so which keys are generating what? |
| 23:13.34 | wasup | ginge can i still run haret console when booting to the zImage? |
| 23:13.55 | ginge | wasup: it wil disconnect you when it jumps into linux |
| 23:14.09 | ginge | wasup: you can launch linux from the haretconsole though |
| 23:14.15 | ginge | r default.txt |
| 23:14.53 | wasup | oh. k... so the zImage u released is just to test what the output of the keys r doing? |
| 23:15.04 | ginge | wasup: yeah. working blind here ;) |
| 23:15.19 | AstainHellbring | q generates NMKI, q BHJU, |
| 23:15.33 | wasup | oh.. dude.. I need to buy you a titan..even though i dont think you want one |
| 23:15.34 | AstainHellbring | e v6ytr |
| 23:15.41 | wasup | :D |
| 23:15.46 | ginge | wasup: lol |
| 23:16.05 | Marajin | wasup: Hah :p |
| 23:16.11 | AstainHellbring | shift is mapped to return |
| 23:16.34 | ginge | so some keys are generating multiple key outputs? |
| 23:16.41 | wasup | sii |
| 23:16.47 | joshts0 | haha q flashes my flash... |
| 23:17.06 | ginge | joshts0: handy to know :) |
| 23:17.25 | wasup | im still waiting for my xp machine to recopy the android stuff over... |
| 23:17.43 | joshts0 | so im booting up automatically into android, should i not be starting android up automatically? |
| 23:17.47 | joshts0 | i mean for testing purposes tha tis |
| 23:18.40 | ginge | joshts0: not really. there is a lot of output you cant see in android |
| 23:20.34 | joshts0 | so .. i shoudl swa out my initrd with..... link? :) |
| 23:21.06 | AstainHellbring | yes ginge |
| 23:21.24 | ginge | joshts0: I posted it above angstom.bin |
| 23:21.38 | joshts0 | oh i missed that, thanks |
| 23:21.39 | dwaradzyn | ginge: i booted 15 mb |
| 23:22.04 | ginge | dwaradzyn: off the sd or using entirely initrd |
| 23:22.15 | dwaradzyn | ginge: initrd |
| 23:22.50 | wasup | hey... command to boot linux from haretconsole? |
| 23:22.55 | ginge | dwaradzyn: I think premy already makde a moer polaris compatible version of android somewhere. Dont know where :( |
| 23:22.59 | ginge | wasup: r default.txt |
| 23:23.07 | AstainHellbring | shift also generates lopv then return upon release of key |
| 23:23.20 | dwaradzyn | ginge: it failed with several mmc0: Command timeout |
| 23:23.44 | wasup | and how do i ignore irq 19 |
| 23:23.49 | ginge | dwaradzyn: yeah, seems to do that when setting up the sd commands. Its waiting to become ready |
| 23:23.57 | ginge | wasup: ibit irqs 19 |
| 23:24.42 | dwaradzyn | ginge: sleep 1 somewhere in initrd would solve it :) |
| 23:24.54 | wasup | so anyone agree with me... front directional bad = irq 6 |
| 23:25.00 | wasup | im pretty sure |
| 23:25.14 | ginge | dwaradzyn: its kernel level. after a clock change the mmc driver keeps resending cmd8 until the card reports ready |
| 23:25.34 | ginge | wasup: could be mddi screen related |
| 23:25.40 | ginge | wasup: maybe a red herring |
| 23:25.56 | wasup | holy s^$t... that zimage wasnt too fond |
| 23:26.04 | wasup | kernal panic |
| 23:26.12 | ginge | wasup: my kernel? |
| 23:26.22 | wasup | unable to mount root fs on |
| 23:26.39 | ginge | panic? and backtrace? |
| 23:26.45 | ginge | are you booting angstrom? |
| 23:26.53 | ginge | I didn't compile much into that kernel |
| 23:27.27 | wasup | nope... only the zImage... not even booting android |
| 23:27.50 | ginge | so what are you booting? |
| 23:27.52 | dwaradzyn | ginge: so the 15 mb angstrom.bin is not yet usable on polaris due to mmc issues ? |
| 23:28.10 | ginge | dwaradzyn: angstrom should be fine |
| 23:28.18 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 23:28.23 | ginge | dwaradzyn: I use angstrom on kaiser and we confirmed it worked on polaris |
| 23:28.37 | ginge | dwaradzyn: just android seems b0rked |
| 23:29.06 | dwaradzyn | ginge: angstrom 6mb works fine, i was asking about angstrom 15mb |
| 23:29.32 | ginge | dwaradzyn: I am confused. Are you booting these off a mounted sd? |
| 23:30.06 | ginge | is there is picture of the titan keyboard anywhere? |
| 23:30.51 | AstainHellbring | ginge you have kaiser right? |
| 23:30.59 | ginge | AstainHellbring: yeah |
| 23:31.34 | AstainHellbring | looks exactly like kaiser except for a few of the fn keys are different like the fn of tab is symbol pad |
| 23:31.50 | wasup | oh wait... just a sec |
| 23:32.08 | ginge | AstainHellbring: thanks |
| 23:32.11 | AstainHellbring | welcome |
| 23:32.34 | dwaradzyn | ginge: i gave up booting android from sd, there are only two options: option one - i get stacktrace because of some kernel problem reading from sdcard; option two: it hangs because system.img is not gsm compatible, only cdma. |
| 23:33.32 | ginge | dwaradzyn: you can boot nearly anything from initrd up to 20MB as long as you dont do a huge read from the sd card |
| 23:34.00 | *** join/#htc-linux miknix (n=miknix@bl4-92-33.dsl.telepac.pt) |
| 23:35.09 | dwaradzyn | ginge: at the moment i was trying to boot 15mb angstrom.bin (from the link provided by you), and there are mmc0: Command timeout issues |
| 23:35.47 | ginge | dwaradzyn: are there about 4 or 5 of them in a row |
| 23:36.04 | dwaradzyn | ginge: 4 times this time |
| 23:36.26 | ginge | right. the mmc timeouts are acceptable (for now). as I said above it is the driver waiting for the card to become ready before it sets up for dma |
| 23:37.09 | ginge | its the backtrace you need to worry about ;) |
| 23:37.14 | dwaradzyn | ok, but you said that angstrom works on polaris. did you mean the 15mb version or 6mb version? |
| 23:37.27 | ginge | both |
| 23:37.33 | ginge | anything out of initrd works |
| 23:38.46 | dwaradzyn | ah |
| 23:39.10 | dwaradzyn | 15mb version does not have "angstrom motd" and login screen |
| 23:39.26 | dwaradzyn | it launches /bin/sh from /init |
| 23:39.38 | ginge | dwaradzyn: yeah, more tools but the init sequence in minimal/non existant |
| 23:40.54 | dwaradzyn | ginge: that is what confused me. "android sd" gave /bin/sh only in case of trouble. |
| 23:41.07 | ginge | these keypress traces are just wrong for titan |
| 23:41.41 | ginge | joshts0: according to the traces q and r trigger the same gpios |
| 23:42.32 | ginge | its like we are missing the whole keyscan sequence |
| 23:43.18 | ginge | anyone fancy more haret? |
| 23:46.06 | wasup | so i get a ^e |
| 23:46.17 | wasup | while booting... ^EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE |
| 23:46.22 | wasup | hahaha |
| 23:48.12 | dwaradzyn | ginge: thanks for your help today, i really appreciate it |
| 23:55.55 | ginge | yeah, now I see why you get 4 keys per press |
| 23:56.15 | ginge | but not enough into to fix it |
| 23:57.25 | wasup | im completely lost... am i suppose to boot android or comment it out and only boot the zImage? |
| 23:58.29 | *** join/#htc-linux NiZoX (n=none@2a01:e35:8a13:a2b0:21c:c0ff:fe25:ff68) |
| 23:59.23 | ginge | change android to angrom.bin so it says "zImage angstrom.bin" (no quotes) |
| 23:59.28 | ginge | arse |
| 23:59.33 | ginge | change android to angrom.bin so it says "initrd angstrom.bin" (no quotes) |
| 23:59.37 | *** join/#htc-linux OpnSrc1 (i=harisha1@gateway/tor/x-94941b7af313ff5f) |
| 23:59.53 | ginge | wasup I could do with some haret help |