| 00:00.13 | martin__ | sure, while doing what? |
| 00:01.52 | cr2 | there is 'pd' and 'vd' command |
| 00:02.06 | cr2 | is there 'virtual write something' ? |
| 00:02.57 | martin__ | just rebooting into windows... |
| 00:03.00 | cr2 | vfh , vfw |
| 00:04.23 | cr2 | [V|P]F[B|H|W] <addr> <count> <value> |
| 00:05.50 | martin__ | what do you actually want me to do? |
| 00:06.37 | cr2 | add a mmutrace on the 0x1f00000 area |
| 00:06.40 | cr2 | size 1 MB |
| 00:07.13 | martin__ | ok |
| 00:07.16 | cr2 | 0x01f00000 0x100000 |
| 00:07.25 | cr2 | it's virtual address is |
| 00:07.34 | cr2 | 0xb5100000 |
| 00:07.51 | cr2 | we were not able to trace the writes there so far. |
| 00:09.30 | cr2 | so my idea is to login, run the trace and do 'vfw' 0xb510xxxx ... to some free area (so the phone does not crash) |
| 00:09.37 | martin__ | what's the actual syntax i need to set up the mmutrace? |
| 00:09.56 | cr2 | addlist mmutrace 0xb5100000 0x100000 |
| 00:10.21 | cr2 | then |
| 00:10.24 | cr2 | listen 9998 |
| 00:10.32 | cr2 | telnet xxx 9998 |
| 00:10.40 | cr2 | on other terminal |
| 00:10.44 | martin__ | k |
| 00:11.16 | martin__ | okay, got both connections |
| 00:12.37 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 00:13.38 | miknix | cr2, do you know which audio chipset the wizard has? |
| 00:13.47 | martin__ | is that trace running now or do i need to kick it off? |
| 00:14.16 | cr2 | martin__: you need to run 'wi 60' |
| 00:14.37 | cr2 | and then |
| 00:14.38 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 00:14.41 | martin__ | okay, and then you want me to just spam some writes from the other connection? |
| 00:14.42 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 00:15.29 | cr2 | vfw 0xb51f0000 0x100 0xffffffff |
| 00:15.34 | martin__ | k |
| 00:15.37 | cr2 | in another session |
| 00:15.50 | dcordes | mmutrace very nice |
| 00:16.05 | cr2 | miknix: no, but i can have a look. |
| 00:16.13 | martin__ | seems to be working |
| 00:16.21 | miknix | cr2, revertive got gsm working.. |
| 00:16.31 | miknix | cr2, audio would be nice to hear ppl talking :p |
| 00:16.41 | martin__ | i'm getting a fuckload of irq15 |
| 00:16.56 | cr2 | miknix: audio may be omap builtin |
| 00:17.14 | cr2 | martin__: do you run mmutrace in 'haret'console ? |
| 00:17.27 | martin__ | yeah, just doing it again with a logfile. |
| 00:17.35 | cr2 | martin__: then use 'ibit irqs 15' |
| 00:18.38 | martin__ | that leaves a bunch of 16 and 19 at longer intervals |
| 00:18.38 | cr2 | dcordes: we are doing a bruteforce mmutrace check. |
| 00:18.48 | cr2 | martin__: mask them too. |
| 00:18.55 | martin__ | k |
| 00:20.36 | martin__ | okay, one irq8 at the start of each wi now |
| 00:21.12 | martin__ | doing the write from the other session |
| 00:21.18 | dcordes | cr2: did Kevin2 add the second irq register line in console? |
| 00:21.21 | martin__ | i get 002.327 2601e650: e4810004(str) # b51f0000 =ffffffff |
| 00:21.40 | cr2 | martin__: that's good. |
| 00:21.49 | martin__ | and then the same up to 002.469 2601e650: e4810004(str) # b51f03fc =ffffffff |
| 00:22.05 | cr2 | now somebody should tell me wtf we don't see the other writes. |
| 00:22.19 | cr2 | hmm. maybe it's page based. |
| 00:22.20 | dcordes | martin__: do you have |
| 00:22.21 | dcordes | Regs_msm7500 = { 0xc0000000: ("IRQ", regOneBits("IRQ")), 0xc0000004: ("IRQ2", regOneBits("IRQ2")), |
| 00:22.28 | dcordes | in regs-msm.py? |
| 00:23.01 | cr2 | dcordes: i may clone my haret source to xanadux CVS |
| 00:23.29 | cr2 | dcordes: because i have many changes to haret source, and will do some more. |
| 00:24.05 | martin__ | dcordes: nope. |
| 00:24.08 | dcordes | cr2: or do a branch in ltg git? |
| 00:24.29 | martin__ | dcordes: i have the IRQ line but not the IRQ2 one. |
| 00:24.32 | dcordes | martin__: you only see half of the irqs w/o it. don't know if that's important now |
| 00:24.34 | cr2 | dcordes: lol, then you'll maintain it. |
| 00:24.54 | dcordes | cr2: don't you have one account? |
| 00:24.55 | martin__ | dcordes: okay, i'll add that |
| 00:25.09 | cr2 | dcordes: btw, we have 4 SD irqs in the list copied from A. |
| 00:25.18 | cr2 | dcordes: do you see any SD/wifi irqs ? |
| 00:25.45 | cr2 | not 4, even 8 |
| 00:26.19 | dcordes | cr2: no last time I checked for new irqs (that was after we added the irq2 line) I didn't see any further SD irqs than the ones which are already documented |
| 00:26.27 | dcordes | s/documented/probed/ |
| 00:27.00 | cr2 | dcordes: you put haret on NAND ? |
| 00:27.15 | dcordes | don't know now |
| 00:27.32 | dcordes | I can't do anything. My sd is toast and I did a hardreset |
| 00:28.00 | dcordes | maybe ask martin to probe the sd |
| 00:29.06 | martin__ | heh, do you guys want remote access to my kaiser to poke around? |
| 00:29.56 | cr2 | martin__: can you put haret on the device, and trace the irqs while inserting/removing the SD card ? |
| 00:30.06 | martin__ | sure, gimme a min |
| 00:31.59 | martin__ | IRQ6 on insert/eject. |
| 00:32.24 | dcordes | that's the SD detect |
| 00:32.27 | dcordes | see http://wiki.xda-developers.com/index.php?pagename=Kaiser_IRQ |
| 00:33.48 | martin__ | what are we trying to acheive here? |
| 00:36.20 | dcordes | I'm also a bit confused |
| 00:36.29 | dcordes | first thought this is going to be a fix-kaiser-mmutrace |
| 00:36.35 | dcordes | now it looks more like kaiser sd research |
| 00:38.45 | martin__ | i'm happy to expose the haret port on a public ip for a while if you want to poke around with mmutrace |
| 00:40.27 | dcordes | martin__: I fear I have no idea what I would do with it since I |
| 00:41.09 | dcordes | don't understand the whole nature of the mmutrace problem |
| 00:41.24 | dcordes | otherwise I would have already put it on the haret mailing list or explained it to Kevin2 |
| 00:41.25 | cr2 | dcordes: it's the msm_proc_comm port. |
| 00:42.01 | cr2 | martin__: can you try to write into the AT tx fifo ? |
| 00:42.16 | dcordes | now that's what I'm talking about |
| 00:42.17 | martin__ | dcordes: well, if someone's around some other time who might know how to debug it but doesn't have there own kaiser, i can do it. |
| 00:43.07 | cr2 | vfw 0xb51004208 0x100 0xffffffff |
| 00:43.23 | martin__ | cr2: if you tell me what to do. in between, i am debugging why the msm_serial driver hangs on boot. |
| 00:43.57 | cr2 | martin__: the same as before but write to the different area |
| 00:44.03 | cr2 | martin__: vfw 0xb51004208 0x100 0xffffffff |
| 00:44.12 | martin__ | ok, just a mo |
| 00:44.13 | cr2 | hmm. |
| 00:44.18 | cr2 | too long :) |
| 00:44.25 | cr2 | vfw 0xb5104208 0x100 0xffffffff |
| 00:45.01 | cr2 | with the working phone. |
| 00:46.04 | dcordes | martin__: maybe turn phone off/on in comm manager before so the buffer is filled |
| 00:47.12 | martin__ | 001.797 2601e650: e4810004(str) # b5104208 =ffffffff |
| 00:47.14 | martin__ | ... |
| 00:47.24 | martin__ | 001.902 2601e650: e4810004(str) # b5104604 =ffffffff |
| 00:47.49 | martin__ | dcordes: what's up with your kaiser? |
| 00:48.50 | dcordes | I have no access because of broken sd |
| 00:49.09 | martin__ | dcordes: can help you set up synce if you want |
| 00:49.10 | cr2 | martin__: ok. interesting. |
| 00:49.31 | dcordes | cr2: what does that reveal? |
| 00:49.53 | dcordes | martin__: that would be very useful. I tried to install it before but didn't get the networking setup |
| 00:49.57 | cr2 | the arm11 mmutrace is working. |
| 00:50.23 | martin__ | dcordes: i couldn't get it going with the usb_rndis_lite stuff |
| 00:50.24 | cr2 | so the communication has some different arm9 -related path. |
| 00:50.35 | martin__ | dcordes: instead i'm using the ipaq module |
| 00:50.51 | dcordes | martin__: ok I will try it with the ipaq tomorrow |
| 00:51.06 | martin__ | if you go into the USB to PC settings in Communications and turn off advanced networking, it acts just like an old ipaq. |
| 00:52.10 | martin__ | now, here is some crazy shit! |
| 00:52.18 | dcordes | *_* |
| 00:52.32 | martin__ | i am booting a kernel with msm_serial compiled in |
| 00:52.38 | martin__ | and using initcalls_debug |
| 00:52.51 | martin__ | it gets to |
| 00:53.09 | martin__ | Calling initcall 0xc0014f50: tty_init+0x0/0x1c4() |
| 00:53.24 | martin__ | where tty_init will then start some callstack |
| 00:53.29 | martin__ | and wind up at msm_serial_init |
| 00:53.37 | martin__ | the first thing in which is a printk |
| 00:53.41 | martin__ | that i added |
| 00:53.51 | martin__ | and of which the first character gets to the framebuffer |
| 00:53.55 | martin__ | then it hangs |
| 00:54.22 | martin__ | i'm sure it's that printk cos i've tried changing that character |
| 00:55.31 | dcordes | you mean the printk makes it hang? |
| 00:55.45 | cr2 | good night. |
| 00:56.40 | martin__ | dcordes: no, it was hanging already |
| 00:56.54 | martin__ | i added various printks to try and work out where |
| 00:57.11 | martin__ | and got absolutely nothing |
| 00:57.18 | martin__ | as if it wasn't even making it into the init |
| 00:57.34 | martin__ | but now having turned on initcalls_debug i can see it getting to tty_init |
| 00:57.50 | martin__ | and somehow the first character of the printk is getting through |
| 00:58.18 | dcordes | sounds to me like it is hanging at that pritnk? |
| 00:58.22 | martin__ | probably what's happening is the whole printk is executing, and then some other stuff |
| 00:58.23 | dcordes | night cr2 |
| 00:58.52 | martin__ | but the other stuff hangs the system before the printk can get all the way to the screen |
| 00:58.59 | martin__ | assuming there's some buffering in there |
| 00:59.03 | dcordes | so what might that other stuff be? |
| 00:59.04 | martin__ | but maybe not |
| 00:59.09 | martin__ | in which case it's even weirder |
| 00:59.23 | martin__ | well, attempting to do something with the uart i guess |
| 01:00.30 | martin__ | i'll try sticking some busyloops after the printks |
| 01:01.55 | martin__ | see if i can slow things down |
| 01:03.12 | martin__ | anyway, enough for tonight, i should sleep |
| 01:03.18 | martin__ | catch you all tomorrow. |
| 01:06.44 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 01:06.55 | dcordes | martin__: did I miss something? |
| 01:49.38 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 02:16.44 | *** part/#htc-linux miknix (n=miknix@bl4-85-189.dsl.telepac.pt) |
| 03:15.11 | *** join/#htc-linux jeebster (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 03:38.51 | *** join/#htc-linux Othello__ (i=Magorium@gateway/tor/x-f7019fbff8bd4fd5) |
| 03:54.25 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 04:31.47 | *** join/#htc-linux par (i=par@dipole.idlepattern.com) |
| 04:56.07 | *** join/#htc-linux LunohoD_ (n=alex@e180069105.adsl.alicedsl.de) |
| 05:06.19 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 05:11.35 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 05:29.41 | *** join/#htc-linux Othello (i=Magorium@gateway/tor/x-d27dc1a55c30e58f) |
| 05:52.03 | *** join/#htc-linux kiozen (n=oeichler@p5492859B.dip0.t-ipconnect.de) |
| 06:27.24 | *** join/#htc-linux rob_w (n=bob@M81f4.m.pppool.de) |
| 06:38.26 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 06:39.18 | *** join/#htc-linux goxboxlive_ (n=goxboxli@208.84-48-176.nextgentel.com) |
| 06:47.43 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 07:07.26 | *** join/#htc-linux JanVanHaarst (n=haars001@kokosnoot.wur.nl) |
| 07:35.07 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9821.dip0.t-ipconnect.de) |
| 07:36.49 | *** join/#htc-linux Babel1 (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 07:38.38 | *** join/#htc-linux andy_js (n=andy@AAmiens-152-1-63-231.w83-198.abo.wanadoo.fr) |
| 07:56.46 | *** join/#htc-linux CVirus (n=GoD@62.135.96.15) |
| 07:58.06 | kiozen | hi Babel1 |
| 07:58.27 | BabelO_ | hi kiozen |
| 07:59.03 | kiozen | BabelO_: what's more important to you: map export or track recording? |
| 08:00.22 | BabelO_ | kiozen: i think map export :) track recording can wait, but map export display black square :( unless i do not follow the right procedure ? |
| 08:00.31 | BabelO_ | track recording can be good too :) |
| 08:02.39 | kiozen | BabelO_: you do the right thing, it's just a bug in GT. I will change it to use the gdal tools. Currently I use my own thread and cheesy code |
| 08:02.55 | kiozen | BabelO_: ok I will do map export 1st |
| 08:04.09 | BabelO_ | kiozen: and on M, when you select a map (without gps activated ) it point you on center of map, that's good, but if you use zomm +/- it do the zoom somawhere else ( i just select map and click on zoom +) |
| 08:05.16 | kiozen | BabelO_: ok, i'll have a look |
| 08:16.21 | *** join/#htc-linux Tellmedark (i=dcfdb230@gateway/web/ajax/mibbit.com/x-598ee307cebb179e) |
| 08:35.32 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9821.dip0.t-ipconnect.de) |
| 09:37.35 | *** join/#htc-linux Babel1 (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 10:22.40 | *** join/#htc-linux miknix (n=miknix@81.193.85.189) |
| 10:25.52 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 10:26.08 | pikapika | hi |
| 10:36.15 | BabelO_ | hi pikapika |
| 10:36.30 | pikapika | hi BabelO_ |
| 10:47.54 | *** join/#htc-linux amd64lover (n=miknix@81.193.91.13) |
| 10:48.39 | *** join/#htc-linux exco (n=exco@e181124093.adsl.alicedsl.de) |
| 10:54.06 | *** join/#htc-linux ndavey (n=neil@220-244-140-108.static.tpgi.com.au) |
| 11:00.33 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 11:10.43 | *** join/#htc-linux exco (n=exco@e181124093.adsl.alicedsl.de) |
| 11:24.12 | *** join/#htc-linux andy_js_ (n=andy@AAmiens-152-1-63-231.w83-198.abo.wanadoo.fr) |
| 11:25.47 | andy_js | hi, I had a problem with my htc universal mounting the root filesystem |
| 11:26.44 | andy_js | I found the cause but have no idea how to fix it. fdisk shows two partition on my sd card p1 and p5 |
| 11:27.10 | andy_js | shouldn't that be p1 and p2 ??? |
| 11:27.20 | andy_js | how do I fix this? |
| 11:28.18 | andy_js | cant live without his portable linux fix |
| 11:39.06 | *** join/#htc-linux exco (n=exco@e181124093.adsl.alicedsl.de) |
| 11:51.51 | *** join/#htc-linux rob_w|laptop (n=rob@p549B86AA.dip0.t-ipconnect.de) |
| 12:24.43 | *** join/#htc-linux andy_js (n=andy@AAmiens-152-1-63-231.w83-198.abo.wanadoo.fr) |
| 12:38.19 | andy_js | hi. |
| 12:38.32 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 12:38.36 | andy_js | has anyone managed to get linux running on their htc-universal? |
| 12:38.59 | andy_js | I always get unable to sync vfs, root device not found |
| 12:39.06 | andy_js | or something along those lines |
| 12:40.39 | tcccp | andy_js: Do you see any kernel messages that it has found some blockdevice? |
| 12:41.01 | tcccp | My kernel has more debugging features than device drivers in it I fear ;) |
| 12:41.24 | tcccp | andy_js: Is your /etc/fstab built accordingly? |
| 12:41.40 | tcccp | andy_js: What's the cmdline of the bootloader |
| 12:43.18 | andy_js | Previously I made two partitions on my 1GB sd card |
| 12:43.30 | andy_js | 1st Fat 16, 2nd Ext3 |
| 12:43.33 | tcccp | hmhm |
| 12:43.51 | tcccp | Wasn't there some issue with such a partition table with other devices similar to the htcu? |
| 12:44.15 | andy_js | I'm not sure. I then extracted the GPE image onto the ext3 partition and installed the |
| 12:44.16 | tcccp | I still have my Kernel/Bootloader on the WinCE side of life |
| 12:45.03 | andy_js | I think I have traced the cause of my problem, but I don't know how to go about fixing it. |
| 12:45.23 | tcccp | what's the cause? |
| 12:45.31 | andy_js | Linux sees two paritions |
| 12:45.36 | tcccp | aye...and? |
| 12:45.36 | andy_js | p1 and p5 |
| 12:45.46 | andy_js | not p1 and p2 |
| 12:45.49 | tcccp | extended partitions %) |
| 12:46.16 | andy_js | so I need to make both partitions extended? |
| 12:46.21 | tcccp | errrm |
| 12:46.30 | tcccp | I avoid extended partitions even on multiboot pcs |
| 12:46.41 | tcccp | swap, /boot, /, ${other_os} |
| 12:48.37 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 12:49.48 | tcccp | andy_js: If you're not willing to change anything concerning the partitions, set the cmdline / fstab to the values the kernel sees |
| 12:53.06 | tcccp | brb |
| 12:54.25 | andy_js | How do I do that? |
| 12:56.08 | BabelO_ | andy_js: look where cab install the .exe, near the .exe you can see a .txt file |
| 12:58.32 | andy_js | I can't find the .txt |
| 12:58.54 | andy_js | How did you guys install linux, and what images do you use? |
| 12:58.57 | BabelO_ | andy_js: what do you see in directory ? only .exe ?. |
| 12:59.04 | andy_js | doesn't mind repartitioning |
| 12:59.19 | andy_js | I have: |
| 12:59.35 | andy_js | <PROTECTED> |
| 12:59.40 | andy_js | <PROTECTED> |
| 12:59.52 | andy_js | both contain one .exe called linload |
| 12:59.55 | andy_js | that is all |
| 13:00.20 | andy_js | at least I think its an .exe |
| 13:00.36 | BabelO_ | andy_js: ok, so this exe contain zImage and default.txt with command line parameters, you cant change it, so you have to use mmcblk0p2 partition |
| 13:01.15 | andy_js | how do I create the mmcblk0p2 partition? |
| 13:01.36 | andy_js | I have tried several times and I always end up with p1 and p5 |
| 13:01.48 | andy_js | both set to primary partitions |
| 13:02.07 | BabelO_ | andy_js: only use p option with fdisk |
| 13:02.26 | andy_js | p = primary right? |
| 13:02.37 | andy_js | both partitions are already primary |
| 13:03.18 | andy_js | ah |
| 13:03.30 | andy_js | I dunno |
| 13:03.44 | andy_js | I've been using linux for about 3 years |
| 13:04.03 | andy_js | I've never had partitions end up like that |
| 13:04.08 | andy_js | its frustrating |
| 13:06.04 | andy_js | Here is what I do/have done: |
| 13:06.25 | andy_js | fdisk /dev/sdb (device name on my desktop) |
| 13:06.37 | andy_js | o (clear all partitions) |
| 13:06.49 | andy_js | w (write) |
| 13:06.54 | andy_js | n (new partition) |
| 13:07.06 | andy_js | 1 (partition 1) |
| 13:07.21 | andy_js | (default block size) |
| 13:07.27 | andy_js | ah dammit |
| 13:07.35 | andy_js | this is pissing me off |
| 13:13.38 | BabelO_ | andy_js: next is n 2 ? |
| 13:13.48 | BabelO_ | should be ok then |
| 13:22.45 | andy_js | BabelO_ What device do you have? |
| 13:23.04 | BabelO_ | andy_js: i have blueangel, artemis and greenphone and n800 |
| 13:23.12 | andy_js | :) |
| 13:23.32 | andy_js | I considered the blueangel |
| 13:23.37 | andy_js | and the greenphone |
| 13:23.46 | andy_js | and the n800 :p |
| 13:24.15 | andy_js | But I am (will be) happy with the universal, once I get GPE running |
| 13:27.52 | goxboxlive_ | andy_js: gpe is running on uni |
| 13:28.00 | BabelO_ | ola goxboxlive_ |
| 13:28.05 | goxboxlive_ | hi |
| 13:28.46 | goxboxlive_ | BabelO_: in installed debian om my uni. I am using xfce as WM, it runs ok, but a little slow |
| 13:28.50 | andy_js | hi goxboxlive_ |
| 13:28.53 | BabelO_ | kiozen: i ve to send my patch for small screen, but i need help, for the second icon to displayoutside information box |
| 13:29.09 | andy_js | goxboxlive_: kudos for your would on htc-linux |
| 13:29.14 | andy_js | work* |
| 13:29.20 | kiozen | BabelO_: what is the problem? |
| 13:29.22 | goxboxlive_ | thx |
| 13:30.07 | andy_js | BabelO_ I have recreated the partitions exactly as said in the instructions |
| 13:31.12 | BabelO_ | andy_js: so it should be ok |
| 13:33.16 | BabelO_ | andy_js: mount your sd card under normal linux before |
| 13:33.59 | andy_js | I just extract the GPE image to the root of the SD card right, and install the .cab for the bootloader? |
| 13:34.12 | andy_js | (root of the ext3 partition) |
| 13:35.33 | BabelO_ | kiozen: the png is never displayed :( |
| 13:36.09 | BabelO_ | andy_js: before check on your normal linux that the partition mounted are sdc1 and adc2 for example |
| 13:36.30 | kiozen | BabelO_: either it's out of the screen or the icon is not found due to a type |
| 13:36.33 | andy_js | sdb1 and sdb2 |
| 13:36.49 | andy_js | so I guess thats alright |
| 13:38.34 | BabelO_ | kiozen: i ll retry this evening then :) btw screen size is DeskTopWidget::ScreenGeometry() , ljp answer on the fly, he just discuss with other guy about getting screen size in applciation |
| 13:39.02 | BabelO_ | kiozen: this function return usable size (in qpe it return size between top and bottom black bar ) |
| 13:39.05 | kiozen | what would we do without ljp :) |
| 13:39.29 | kiozen | that is good think I have to review my code |
| 13:40.58 | BabelO_ | kiozen: i ve done a comm manager :) |
| 13:41.17 | kiozen | BabelO_: cooool :) |
| 13:45.24 | andy_js | btw: how did you come up with the name xanadux. |
| 13:45.47 | andy_js | Its not named after an awesome song by a certain Canadian power trio? |
| 13:45.54 | andy_js | is it? |
| 13:49.00 | BabelO_ | don't know |
| 13:59.19 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
| 14:02.23 | andy_js | Damn, still doesn't work |
| 14:04.09 | andy_js | Unable to mount root fs on unknown-block(0,0) |
| 14:05.42 | andy_js | Can someone please help me? I only have to stock 64mb ram, so I can't use one of those hefty all in one installers |
| 14:06.43 | andy_js | I have partitioned the card correctly, and I am able to mount it via ram-disc |
| 14:07.02 | andy_js | so why can't the bootloader for GPE find it? |
| 14:15.02 | andy_js | goxboxlive_: Can you confirm that all I need to do is partition the disk, extract the image, and install the bootloader? |
| 14:18.38 | BabelO_ | kiozen: http://linuxbox2.free.fr/sc_Thu_Jan_1_00.09.34_1970.png and for commanager http://linuxbox2.free.fr/sc_Thu_Jan_1_00.08.43_1970.png |
| 14:19.24 | *** join/#htc-linux ltxda (n=ltxda@unaffiliated/ltxda) |
| 14:19.28 | andy_js | dammit, the readme files are pretty bare |
| 14:19.44 | andy_js | I get the same results with the sd card removed as i do with it installed |
| 14:19.45 | kiozen | BabelO_: you need to downsize the font for the buttons |
| 14:21.22 | BabelO_ | kiozen: yes a little :) i want to add a another button to switch between information mode ( altitude + direction or full ) |
| 14:21.42 | BabelO_ | kiozen: commmanager should be generic :) |
| 14:22.11 | BabelO_ | kiozen: no code, just a big conf file , lol |
| 14:22.23 | kiozen | BabelO_: always keep in mind that usually the virtual buttons should have a 1:1 with physical buttons |
| 14:23.34 | kiozen | BabelO_: with the n560 I will not use the touchpad too often, the vritual keys are more a hint for the real buttons |
| 14:23.52 | kiozen | BabelO_: however life on small phone devices might be different |
| 14:25.00 | BabelO_ | kiozen: yes, i understand, now i can see more maps on screen :) |
| 14:25.31 | kiozen | BabelO_: that is for sure :) teh layout looks nice |
| 14:26.04 | kiozen | BabelO_: did you notice the translate call in CInfoScreen::draw()? |
| 14:26.28 | kiozen | BabelO_: maybe that is the reason why you don't see your icon |
| 14:26.35 | BabelO_ | kiozen: no , did not see |
| 14:26.38 | BabelO_ | ahhh |
| 14:26.50 | kiozen | BabelO_: 0 is not top it's an offset |
| 14:27.05 | BabelO_ | kiozen: and i fight with the inforscreen, to get two more digit on east .... |
| 14:27.44 | kiozen | BabelO_: because of the heading stuff for the curser or the altitude value? |
| 14:28.09 | BabelO_ | kiozen: yes, don't understand, your high level calcul for that :) |
| 14:28.26 | BabelO_ | kiozen: because of altitude size i think |
| 14:28.50 | kiozen | BabelO_: ok thus the gps position is not readable? |
| 14:29.13 | BabelO_ | kiozen: as you can see on screenshot, i miss 2 digit |
| 14:29.40 | kiozen | BabelO_: ah right, this is due to bad QRect calculation |
| 14:30.06 | kiozen | BabelO_: on n560 I assume a certain width as I have enought space |
| 14:30.58 | kiozen | BabelO_: on smaller devices you have to calculate the width of a coord. and setup the QRect's according to that |
| 14:31.54 | kiozen | BabelO_: however if the 2nd line does not fit in total, we have a problem |
| 14:32.53 | BabelO_ | kiozen: i also try to look if OSD is more readable, likesubtitle with black transparent backgroung |
| 14:34.08 | kiozen | BabelO_: yes that might be a good idea, or with white border like the waypoint label |
| 14:34.30 | BabelO_ | yes |
| 14:40.43 | kiozen | BabelO_: just had a look at the phone picture on my homepage, if you place the the rectangles right, all information should fit on the infobox, without icons |
| 14:42.27 | BabelO_ | kiozen: yes |
| 14:43.43 | *** join/#htc-linux Othello__ (i=Magorium@gateway/tor/x-0d6d3e1796ed530f) |
| 15:04.43 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 15:28.23 | *** join/#htc-linux holymoly (n=new@mail.wjsgroup.com) |
| 15:29.09 | *** join/#htc-linux exco (n=exco@e181117106.adsl.alicedsl.de) |
| 15:31.43 | exco | /join #compiz-fusion |
| 15:31.47 | exco | /join #ubuntu |
| 15:35.41 | ltxda | http://forum.xda-developers.com/showthread.php?t=395121 |
| 15:37.42 | *** join/#htc-linux exco (n=exco@e181117106.adsl.alicedsl.de) |
| 15:38.54 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
| 15:42.27 | *** join/#htc-linux CVirus (n=GoD@62.135.96.15) |
| 15:46.37 | dcordes | cr2: what about the mmutrace/fifos |
| 15:46.45 | dcordes | would be nice if we could get it working |
| 16:11.22 | *** join/#htc-linux danielkbx (n=danielkb@124-169-62-208.dyn.iinet.net.au) |
| 16:11.32 | danielkbx | Cheers mates. |
| 16:17.20 | kiozen | hi mate |
| 16:21.54 | *** join/#htc-linux infernix (i=nix@unaffiliated/infernix) |
| 16:26.01 | danielkbx | How're doing, kiozen? |
| 16:26.29 | kiozen | danielkbx: thanks fine |
| 16:26.57 | kiozen | danielkbx: I think about changing the default no map device |
| 16:27.08 | kiozen | danielkbx: maybe that removes your crashes |
| 16:27.22 | kiozen | danielkbx: but I am on the run now |
| 16:27.25 | kiozen | bbl |
| 16:27.29 | danielkbx | Bye. |
| 16:31.17 | *** join/#htc-linux the_sys0p (n=the_sys0@116.199.69.97) |
| 16:32.15 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 16:32.30 | *** part/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 16:38.06 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
| 16:38.20 | *** join/#htc-linux pH5 (n=ph5@e178220251.adsl.alicedsl.de) |
| 16:40.43 | dcordes | hi pH5 |
| 16:40.54 | *** join/#htc-linux infernix (i=nix@unaffiliated/infernix) |
| 16:41.01 | dcordes | martin__: you around? I think I got synce working |
| 16:41.13 | pH5 | hi dcordes |
| 16:48.21 | *** join/#htc-linux infernixx (i=nix@unaffiliated/infernix) |
| 16:48.23 | dcordes | /usr/bin/synce-pcp: Could not find configuration at path '(Default)' |
| 16:48.29 | dcordes | somebody knows where Default is? |
| 16:57.55 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 16:58.31 | *** join/#htc-linux patoche (n=pat@lns-bzn-56-82-255-212-227.adsl.proxad.net) |
| 17:12.17 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 17:14.51 | BabelO | hi pH5 |
| 17:15.59 | *** part/#htc-linux danielkbx (n=danielkb@124-169-62-208.dyn.iinet.net.au) |
| 17:28.32 | pH5 | hi BabelO |
| 17:30.20 | BabelO | pH5: pc is now working again ? |
| 17:40.09 | *** join/#htc-linux rob_w|laptop (n=rob@M81f4.m.pppool.de) |
| 17:43.53 | *** join/#htc-linux JohnnyK (n=johnnyk@nfx-nat-229.pilsfree.net) |
| 17:46.44 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1d9d2.pool.einsundeins.de) |
| 17:51.55 | *** join/#htc-linux |sven| (n=kvirc@e178251176.adsl.alicedsl.de) |
| 17:54.32 | *** part/#htc-linux |sven| (n=kvirc@e178251176.adsl.alicedsl.de) |
| 17:56.48 | *** join/#htc-linux szsoftware (n=szsoftwa@e178251176.adsl.alicedsl.de) |
| 18:04.02 | *** join/#htc-linux kiozen_ (n=kiozen@rgnb-4db1ff86.pool.einsundeins.de) |
| 18:06.20 | kiozen_ | BabelO: ? |
| 18:08.45 | BabelO | kiozen_: |
| 18:09.06 | kiozen_ | BabelO: svn up |
| 18:09.22 | kiozen_ | transparency should work, now |
| 18:09.55 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 18:13.05 | BabelO | kiozen_: ok, i ll try back in a moment :) was looking at raw() :) |
| 18:15.08 | szsoftware | Dear everybody! |
| 18:15.25 | pH5 | BabelO: yes :) |
| 18:15.40 | BabelO | pH5: good, so you are back :) |
| 18:15.59 | BabelO | pH5: is possible to have an update of 2.6.26-rc1 to 2.6.26-rc |
| 18:16.01 | BabelO | 3 |
| 18:16.03 | BabelO | ? |
| 18:16.23 | szsoftware | Is someone in this chat currently working on kernel-image for kaiser or polaris? |
| 18:17.57 | BabelO | pH5: it seem that suspend /resume works on artemis, but the resume broken the ext3 partition :( |
| 18:19.29 | pH5 | BabelO: re update: sure. I'd say just merge v2.6.26-rc3 into htc-omap |
| 18:20.22 | Kevin2 | BabelO: The mainline branch? I can update that if you want. |
| 18:20.23 | pH5 | suspend/resume is great news. breaking ext3 partition is probably because mmc core "ejects/reinserts" cards during suspend/resume |
| 18:20.35 | pH5 | hi Kevin2 |
| 18:20.55 | Kevin2 | Hi pH5. |
| 18:26.01 | diogene31 | pH5: Yet the "experimental" MMC option UNSAFE_RESUME works great here (for me at least). This one doesn't break the partition AFAIK. |
| 18:28.00 | pH5 | diogene31: good point, thanks. and when the mmc slot is hidden beneath the battery this isn't even unsafe :) |
| 18:28.54 | diogene31 | pH5: Ah, a good engineer designed the SD slot that I see :) |
| 18:30.33 | BabelO | hi Kevin2 |
| 18:31.09 | BabelO | Kevin2, pH5 yes the mainline to 2.6.23-rc3, htc-omap branch is setup to track mainine change so merge is quickly done :) |
| 18:32.11 | BabelO | pH5: ah good idea for eject/insert, i va to look at that, cr2 said maybe it is dma, and i see that there is dma fix for omap1, so i just hope :) |
| 18:33.11 | BabelO | diogene31: :) yes i use sd slot, maybe it is a bad idea |
| 18:33.49 | Kevin2 | BabelO: mainline branch should be updated now. You can do it yourself - ssh into linuxtogo.org and run ~kevin/bin/gitmainline |
| 18:33.58 | Kevin2 | (Be careful about file permissions though..) |
| 18:34.34 | BabelO | Kevin2: thanks for tthe update :), i start htc-omap update |
| 18:35.27 | *** join/#htc-linux kiozen_ (n=kiozen@rgnb-4db1d94a.pool.einsundeins.de) |
| 18:38.17 | *** join/#htc-linux Babel1 (n=BabelO@lun34-2-82-238-28-28.fbx.proxad.net) |
| 18:39.43 | kiozen_ | BabelO found a bug, svn up |
| 18:40.42 | kiozen_ | BabelO hm , still not working... |
| 18:45.58 | BabelO | kiozen_ rohh :) |
| 18:46.22 | *** join/#htc-linux miknix (n=miknix@81.193.91.13) |
| 19:25.42 | kiozen_ | BabelO: GDAL sucks, no trival solution possible :/ |
| 19:30.27 | szsoftware | Hey Guys, I dont wanna be annoying. Just set up IRC client and joined in here. Can you read my messages? Thanks for reply |
| 19:31.16 | revertive | szsoftware: yes |
| 19:31.34 | szsoftware | Thank you |
| 19:31.51 | revertive | your welcome |
| 19:31.56 | szsoftware | :-) |
| 19:32.51 | szsoftware | Just went into all that htc-linux stuff throungh xda-developers and want linux on my polaris. Contributing as much as I can. |
| 19:34.27 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 19:38.02 | szsoftware | is this -> http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-msm the current developing-"center" for xda-developers? Last changes are 13 days ago |
| 19:41.03 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfb80f.pool.einsundeins.de) |
| 19:43.14 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 19:45.54 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 20:01.31 | BabelO | kiozen_: so no solution :(, have to do your magix line to have only one big file ? |
| 20:02.04 | kiozen_ | BabelO I will fix it, but not fast :) |
| 20:04.08 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 20:04.13 | dcordes | hola |
| 20:05.12 | dcordes | szsoftware: hello :) |
| 20:05.30 | BabelO | kiozen_: ok, no problem :), still looking at omap resume |
| 20:05.47 | BabelO | kiozen_: i ve some experimental code for gt too :) |
| 20:05.57 | dcordes | the development center is this place here I would say. This link there is the kernel repository for the devices with msm chipsets |
| 20:06.09 | dcordes | kaiser, vogue, titan, polaris and friends |
| 20:06.16 | kiozen_ | BabelO ok, send a patch and I trow it in :) |
| 20:06.21 | szsoftware | yes I know, didnt specify it |
| 20:06.24 | kiozen_ | s/trow/throw/ |
| 20:06.36 | szsoftware | I am reading about msm on kaiser and pola |
| 20:07.03 | szsoftware | have read all the xda-dev thread :-) |
| 20:07.18 | dcordes | szsoftware: from what I have heard so far polaris is kaiser w/o keybaord |
| 20:07.25 | dcordes | ok that's good |
| 20:08.36 | szsoftware | I want to have an impression of progress and just order some things or check thatout |
| 20:10.08 | szsoftware | Also try collecting infos in the depricated Linux Page on the xda-dev wiki. |
| 20:10.39 | BabelO | kiozen_: i need a volume test :) scanning some maps actually |
| 20:11.41 | kiozen_ | BabelO: I have referenced a gridless map today |
| 20:11.42 | dcordes | szsoftware: there is not just the deprecated xanadux page but also important research information for the different devices |
| 20:11.50 | dcordes | try searching for <devicename> research |
| 20:12.12 | kiozen_ | BabelO: If you try to avoid errors while scanning, you can fit the tiles together with gimp |
| 20:12.18 | dcordes | http://wiki.xda-developers.com/index.php?pagename=KaiserResearch eg |
| 20:12.32 | BabelO | kiozen_: yes i ve tried that :) |
| 20:12.34 | kiozen_ | BabelO: next you can reference the map with a few points. |
| 20:12.56 | BabelO | kiozen_: but i need 4Gb memory more |
| 20:14.32 | kiozen_ | BabelO: my map has 26009x18655 pixel, that was still quite workable in gimp |
| 20:15.03 | kiozen_ | BabelO: Win XP died because of the 2GB per process limit :P |
| 20:15.51 | *** join/#htc-linux aLeSD (n=alex@193.153.123.30) |
| 20:17.53 | BabelO | kiozen_: lol |
| 20:18.09 | BabelO | kiozen_: adjust the 2Gb limit sezt it to 3Gb |
| 20:18.38 | BabelO | kiozen_: 3Gb is the ultimate limit |
| 20:19.01 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd2e.pool.einsundeins.de) |
| 20:20.21 | BabelO | kiozen ? 3Gb limit ? you have the windows key for that ? |
| 20:20.35 | kiozen | BabelO: gimp works, it's just a PITA to rotate, scale and move the tiles, but if they have just minor errors it works |
| 20:20.49 | kiozen | BabelO what key? |
| 20:21.39 | BabelO | kiozen on windows you can change this limit and set it to 3Gb, don't remember if it is only for server edition |
| 20:22.26 | kiozen | BabelO never tried :) but why bother, we have linux |
| 20:23.42 | BabelO | kiozen yes agree |
| 20:24.57 | kiozen | BabelO: hugin looks quite nice but it's only for panorama views |
| 20:24.58 | szsoftware | dcordes: will take a further look at the recommended site |
| 20:25.10 | kiozen | BabelO: no matrix of tiles |
| 20:25.29 | kiozen | BabelO: http://hugin.sourceforge.net/ |
| 20:27.05 | BabelO | kiozen ah yes i see something like that already |
| 20:27.59 | szsoftware | dcordes: is the LINUX/XANADUX Wiki page a really wiki or is there some coordination about its content? Don't want to change too much, if someone feels undermining his competence.. |
| 20:28.19 | kiozen | BabelO: but I haven't figured out yet how to switch off the lens correction |
| 20:39.19 | dcordes | szsoftware: sorry I'm the wrong person to ask about this |
| 20:43.10 | szsoftware | dcordes: the research page is not so useful for me since I'm not that hacker but compiler/tester :-) |
| 20:44.03 | szsoftware | dcordes: btw, PolarisResearch doesn't exist. |
| 20:45.18 | szsoftware | dcordes: conclusively the xda-dev wiki needs really to be maintained more. Will see what can I do.. |
| 20:45.55 | pH5 | szsoftware: create it then, it's a wiki for that reason. it's nice not to reorganise other people's stuff while they look the other way, but creating new pages or adding information can't be wrong |
| 20:46.14 | pH5 | or so I think :) |
| 20:47.09 | BabelO | pH5: i did not see git mainline change |
| 20:47.36 | pH5 | BabelO: it's at -rc4 now |
| 20:47.38 | BabelO | pH5: i ve done git fetch, then git pull origin htc-omap as usuall, but by Makefile is still -rc1 |
| 20:48.01 | pH5 | BabelO: because it won't merge automatically, you have to do that |
| 20:48.34 | BabelO | pH5: really ? even with the git --track i ve done to create branch .. ok i look |
| 20:49.18 | pH5 | BabelO: try what happens when you fetch mainline |
| 20:49.58 | pH5 | at least in the linuxtogo.org repository it's not tracking mainline |
| 20:50.02 | BabelO | pH5: ok, i ll ask on git channel to have more explanation :) |
| 20:50.07 | szsoftware | ph5: yes youre right. But when I went into that stuff I was very confused about the not good organized informations. I assume that the wiki.xda-dev Linux pages Portal Xanadux is not correct for the whole Linux issue. Isn't xanadux a special project for certain devices? |
| 20:50.09 | martin__ | dcordes: still need help with synce? |
| 20:52.33 | pH5 | szsoftware: I think xanadux is our roots. but when I started playing with magician the xanadux cvs repo on sourceforge.net was already abandoned more or less. |
| 20:58.49 | szsoftware | ph5: I don't want to waste your time. But I don't know a better place to discuss this issue. As I said, I went into that stuff some days before and it couldt be easier to find a starting point to join developement or contributing. |
| 21:01.33 | pH5 | szsoftware: don't worry, if anybody wastes my time on irc, it's me |
| 21:03.22 | BabelO | pH5: ok, merging by hand , ùy create command should do it, but they don't know, i use git merge origin/mainline now :) |
| 21:03.23 | szsoftware | ph5: Imagine how many current htc-devices are currently selled. Some new owners love linux and want have playing mp3 in a bash-console and they wouldt do anything for that. But less of them are enthusiatstic linux fans most of them no hackers but many potential testers of your kernel images and some want to compile their own. If information woudlt be easier to achive central and quickly, it would |
| 21:03.39 | szsoftware | ph5: be good for the progress |
| 21:04.16 | pH5 | BabelO: the difference is that the fetch mainline was done on the linuxtogo server by Kevin2 |
| 21:04.28 | pH5 | but in the repo on ltg.org, htc-omap does not track mainline |
| 21:04.56 | BabelO | pH5: ok |
| 21:04.57 | pH5 | in your local repo htc-omap tracks mainline, so fetching mainline in your local copy should do the merge automatically |
| 21:05.02 | pH5 | AIUI |
| 21:05.07 | *** join/#htc-linux tre9 (n=user@dialin53a-44.ppp.uci.edu) |
| 21:07.38 | pH5 | szsoftware: that's probably true. |
| 21:08.25 | cr2 | hi |
| 21:08.55 | pH5 | hi cr2 |
| 21:09.06 | cr2 | pH5: are the htc-spi-kbd and Kevin2's s3c2442 patches in the mainline git tree now ? |
| 21:11.32 | szsoftware | ph5: As I consider it right, there is strong and active developement on htc-linux and the msm-stuff. Would'nt it be nice, to have a buildroot/framework for all that devices, mentioned on xda-developers, such as openwrt for wlan-devices? |
| 21:13.57 | cr2 | szsoftware: http://www.angstrom-distribution.org |
| 21:14.18 | cr2 | szsoftware: but there are different goals for different people. |
| 21:14.21 | pH5 | cr2: no. mainline should only contain just that. |
| 21:14.33 | cr2 | pH5: ok |
| 21:14.44 | pH5 | but we could misuse master for that I guess |
| 21:14.56 | cr2 | pH5: you've told me that it's possible to use generic gpio api for asic3 gpio ? |
| 21:14.58 | cr2 | lol |
| 21:15.08 | pH5 | Kevin2: any opinion on that? |
| 21:15.43 | pH5 | we could go and create htc-pxa, htc-s3c etc. branches, but I agree with cr2 that a single development branch would be nice. |
| 21:16.34 | pH5 | using work for this might be too much work (merging the whole hh.org history with every new -rc...) |
| 21:16.44 | cr2 | yes, we have mostly zero overlap between these branches, and even the omap people are using the same drivers. |
| 21:17.15 | paulproteus | pays attention to this discussion |
| 21:17.36 | cr2 | pH5: is there something _really_ unique in the hh.org tree ? |
| 21:17.48 | cr2 | pH5: for the non-ipaq devices |
| 21:18.05 | cr2 | acx100 comes to mind. |
| 21:18.12 | pH5 | cr2: the low-level power management hooks we use for resume and the serial hooks for example |
| 21:18.25 | cr2 | yes, i feared that too. |
| 21:18.49 | cr2 | both are really necessary. |
| 21:25.05 | tre9 | Hi all. I tried the BA Qtopia image on linuxtogo. Looks very nice, but I had trouble starting applications. I think only the phone app started. |
| 21:25.15 | tre9 | Is that image working well for others? |
| 21:29.01 | BabelO | tre9: hi, yes works well here |
| 21:29.29 | tre9 | ok. is it slow the first time it boots maybe? |
| 21:36.47 | dcordes | szsoftware: there is a kernel package for the msm git and a kaiser machine type in openembedded |
| 21:37.10 | dcordes | (angstrom is built with oe) |
| 21:37.36 | szsoftware | I just read the angstrom pages :-). Downloading oe and bitbake... |
| 21:37.55 | BabelO | tre9: yes it is |
| 21:38.10 | *** join/#htc-linux aLeSD (n=alex@193.153.123.30) |
| 21:38.11 | dcordes | szsoftware: currently it builds some git.android.com revision, not our own msm tree |
| 21:38.48 | szsoftware | will your development go back into the git.android tree? |
| 21:39.01 | dcordes | no I do not think so |
| 21:39.21 | szsoftware | so there is concurrent develpment? |
| 21:39.22 | paulproteus | If it hits mainline it probably would.. |
| 21:39.28 | dcordes | but I will try and keep up with them once we get further on kaiser |
| 21:39.34 | tre9 | BabelO: seems to be working better now, thank you. This is really slick! |
| 21:39.36 | lama | hello |
| 21:39.40 | dcordes | szsoftware: not really |
| 21:40.06 | dcordes | I wouldn't call this concurrent |
| 21:41.04 | dcordes | martin__: yes I start the dccm program thing and synce-start-serial which looks fine. but then I don't know how to go on. I would like to have the nand as a filesystem |
| 21:41.06 | szsoftware | but what does it matter if you merge git.android, isn't it? |
| 21:41.36 | BabelO | tre9: you have tried auto install ? or you installed on ext3 partition ? |
| 21:43.29 | tre9 | I used ext3 partition because that's what I was familiar with. I hear the autoinstall is easy though. |
| 21:44.33 | cr2 | tre9: but probably slower at runtime |
| 21:45.25 | BabelO | tre9: you have my app working on latest image :) |
| 21:45.30 | *** join/#htc-linux patoche (n=pat@lns-bzn-56-82-255-212-227.adsl.proxad.net) |
| 21:46.07 | cr2 | BabelO: did the si47xx people answer you ? |
| 21:46.11 | dcordes | szsoftware: sorry not sure what you mean |
| 21:46.18 | tre9 | cr2: I guess it needs an extra step to write to FAT file? |
| 21:46.45 | tre9 | BabelO: which app? |
| 21:46.52 | cr2 | tre9: loop+fat |
| 21:47.36 | BabelO | tre9: messenger app in application |
| 21:50.15 | tre9 | BabelO: Oh, I just found Application button :) |
| 21:50.36 | szsoftware | dcordes: your development in git.linuxtogo.org htc-msm is based on git.android. I thought, devel in git.android goes into that tree from time to time |
| 21:50.50 | tre9 | BabelO: I don't have network connection to BA here, but will test tomorrow. |
| 21:51.40 | BabelO | tre9: ok :) |
| 21:51.40 | dcordes | szsoftware: yes you're right. That's how it's supposed to go |
| 21:52.08 | dcordes | szsoftware: I don't see the point in merging the git.android changes at the moment. Won't get us anywhere |
| 21:52.10 | BabelO | tre9: i will add a commangaer soon too, i m testing it on artemis :) |
| 21:52.56 | tre9 | BabelO: that would be great. |
| 21:54.35 | szsoftware | dcordes: Ok. But what about the angstrom/oe progress. Is that concurrent to your efforts? From there came same promisingly things |
| 21:54.54 | szsoftware | dcordes: some |
| 21:55.22 | dcordes | szsoftware: OE is just metadata. We can use it to make images with the kernel/modules in linuxtogo |
| 21:55.27 | BabelO | cr2: testing rc4 there is a dma fix in it |
| 21:55.57 | szsoftware | dcordes: I see. |
| 21:57.20 | szsoftware | dcordes: some more questions: In the forum you provide some current images for testing.The git tree is 13days old. Did I miss something? |
| 21:57.59 | dcordes | szsoftware: it is made from my local tree. I tried to merge the latest changes from dzo with git.linuxtogo.org htc-msm |
| 21:58.10 | dcordes | because I'm not able to test myself I posted it on the forum ;) |
| 21:58.31 | szsoftware | dcordes: :-) |
| 21:58.39 | dcordes | but that was nonsense anyway because I don't need sound when I can't dial |
| 21:59.01 | dcordes | cr2: what can we do about the mmutrace? |
| 21:59.41 | szsoftware | dcordes: why not ? videofonie and in german we call it "gebärdensprache" :-) |
| 22:00.14 | dcordes | szsoftware: the point is we can read at commands on kaiser but not write them. So you won't be able to dial anything |
| 22:00.56 | dcordes | even more important is to make booting mroe reliable |
| 22:01.12 | dcordes | I guess you took from the thread that there is an annoying problem |
| 22:02.06 | szsoftware | dcordes: is that in context of my last statement? |
| 22:02.30 | dcordes | no it's just random bits of information |
| 22:03.37 | dcordes | well somehow it is. You can't make video calls either when you can't dial. |
| 22:03.41 | BabelO | cr2: this message make me crazy :) dmesg: Stale NFS file handle |
| 22:03.59 | cr2 | BabelO: you have nfs in your kernel ? |
| 22:04.21 | BabelO | cr2: yes to mount my home computer |
| 22:04.31 | cr2 | dcordes: i think we should dissect the msm_proc_comm function and dump as much as possible |
| 22:04.32 | BabelO | cr2: it is after resume, so maybe ph5 is right |
| 22:04.43 | BabelO | cr2: i need to remove the mmc eject / insert |
| 22:04.59 | cr2 | dcordes: where is msm_proc_comm located |
| 22:05.02 | cr2 | BabelO: ok. |
| 22:05.23 | dcordes | cr2: what you mean dissect? look where it is on kaiser? |
| 22:17.38 | cr2 | dcordes: in the kernel tree |
| 22:18.11 | cr2 | dcordes: i wish we could track who writes things in these DEX regions. |
| 22:18.34 | dcordes | cr2: If that's what you mean, I already tried to add the proc comm code into our tree |
| 22:27.35 | dcordes | cr2: people in the xda forum say they can't boot my kaiser zImage with proc comm |
| 22:38.50 | dzo | hi all |
| 22:41.30 | dcordes | hi dzo |
| 22:42.20 | dzo | how are things, have you figured out the mmutrace problems yet? |
| 22:42.42 | dcordes | not really. martin__ did something yesterday |
| 22:43.01 | dcordes | I'm not quite sure about what it meant |
| 22:43.21 | *** join/#htc-linux exco (n=exco@p4FCFA115.dip0.t-ipconnect.de) |
| 22:43.52 | dzo | I think he just checked that you could trace a write from haret and you can so it's not harets fault. |
| 22:45.17 | dzo | perhaps smem is mapped to somewhere else too, are you using virtual addresses to mmutrace, doing p2v(addr) wont work because there is another mapping at 0x9bfx that it gets first. |
| 22:47.45 | dcordes | hm I don't know and can't test now |
| 22:47.45 | dzo | send me a mmu dump and I'll have a look, (dump mmu in haret) |
| 22:47.59 | dcordes | oh damn why does my sd have to broken now |
| 22:48.07 | dcordes | martin__: you here? |
| 22:48.08 | dzo | why do you need sd? |
| 22:48.15 | dcordes | to access |
| 22:48.37 | dzo | what's wrong with usb? |
| 22:48.44 | dcordes | don't have synce working |
| 22:49.04 | dcordes | I could install active sync on a windows machine |
| 22:49.05 | dzo | have you tried rndis-lite? |
| 22:49.37 | dzo | you also need to change some settings on the phone i think |
| 22:49.49 | dcordes | dzo: I think I set it up correctly already. So I tried to install a cab file for testing but that can't find the configuration file in 'Default' path |
| 22:49.57 | dcordes | dzo: did that I think the connection is ok |
| 22:50.05 | dcordes | synce-serial-start looks ok |
| 22:50.41 | dzo | it should set up another eth adapter with address 169.254.2.2 |
| 22:51.22 | dzo | are you running odccm too |
| 22:51.23 | dcordes | a second let me start it up |
| 22:51.55 | dcordes | dccm I have |
| 22:51.58 | dzo | try odccm -f and plug in the phone |
| 22:53.08 | dcordes | synce-serial-start is now waiting for your device to connect -> message shows up on kaiser saying user is ok or so |
| 22:53.39 | dcordes | and "dccm" is running but not odccm |
| 22:54.06 | dzo | I don't use synce-serial, just the rndis module and odccm. |
| 22:54.30 | dzo | what are your last kernel messages, dmesg | tail |
| 22:54.50 | dcordes | [59915.114613] ipaq 6-2:1.0: PocketPC PDA converter detected |
| 22:54.50 | dcordes | [59915.116708] usb 6-2: PocketPC PDA converter now attached to ttyUSB0 |
| 22:57.16 | dzo | on the phone, try selecting "enable advanced network functionality" under usb settings in the settings menu. |
| 22:58.55 | dcordes | ok |
| 22:59.03 | dcordes | and then? |
| 22:59.37 | *** join/#htc-linux lama_ (i=lama@netbsd.pl) |
| 22:59.45 | dzo | disconnect and reconnect and see if there are messages about rndis from kernel. |
| 23:01.16 | dzo | pls, pcp etc.. should then work |
| 23:01.53 | dcordes | connect using dccm & synce-serial-start? |
| 23:02.53 | dzo | no, just physically connect the phone and it rndis0 should appear. |
| 23:03.05 | dcordes | eth1: register 'rndis_host' at usb-0000:00:1d.2-2, RNDIS device, 80:00:60:0f:e8:00 |
| 23:03.19 | dzo | ok try pls |
| 23:03.38 | dcordes | synce-pls? |
| 23:03.55 | dzo | perhaps, i just have pls |
| 23:04.40 | dzo | dccm should also say device_info_received |
| 23:05.12 | dcordes | synce-pls gives me this stupid config file not found error |
| 23:05.44 | dzo | anyway, if you follow the instructions on the synce page it should work, i've got to go now. bye... |
| 23:07.16 | dcordes | dzo: I will email you mmu |
| 23:07.22 | dcordes | hm I've already done this.. |
| 23:09.18 | dcordes | cr2: do you have the kaiser mmu dump? |
| 23:14.01 | *** join/#htc-linux simonbaur (n=simonbau@80-218-157-103.dclient.hispeed.ch) |
| 23:14.17 | *** part/#htc-linux simonbaur (n=simonbau@80-218-157-103.dclient.hispeed.ch) |
| 23:16.57 | *** join/#htc-linux szsoftware (n=szsoftwa@e178251176.adsl.alicedsl.de) |
| 23:17.08 | *** part/#htc-linux BabelOn (n=BabelO@lun34-2-82-238-28-28.fbx.proxad.net) |
| 23:38.48 | *** join/#htc-linux MHazem (n=GoD@82.201.178.223) |
| 23:40.09 | cr2 | dcordes: maybe |
| 23:40.33 | lama_ | hi cr2 |
| 23:42.37 | dcordes | cr2: can you email it to dzo? |
| 23:47.44 | martin__ | dcordes: do you have some firewall rules? |
| 23:48.17 | martin__ | that seems to be one of the big gotchas with synce |
| 23:49.01 | martin__ | you need to be letting in packets over the ppp link from the phone |
| 23:53.00 | martin__ | i couldn't get it to work the rndis way |
| 23:53.08 | martin__ | so am doing it the ipaq way |
| 23:54.02 | lama_ | http://wepokers.blogspot.com/2008/05/microsoft-confirms-windows-7-for-2010.html |
| 23:54.43 | dcordes | martin__: nevermind can you get dzo an mmu dump? |
| 23:54.55 | martin__ | sure |
| 23:55.13 | dcordes | I will install this smb program and do it over wifi when I got my sd.. |
| 23:55.21 | dcordes | that's great thanks. |
| 23:56.43 | martin__ | dcordes: for synce i'm using these udev rules: |
| 23:56.46 | martin__ | ACTION=="add", DRIVERS=="ipaq", SUBSYSTEM=="tty", KERNEL=="ttyUSB*", RUN+="/usr/sbin/synce-serial-udev-add" |
| 23:56.49 | martin__ | ACTION=="remove", KERNEL=="ttyUSB*", SUBSYSTEM=="tty", RUN+="/usr/sbin/synce-serial-udev-remove" |
| 23:56.56 | tcccp | :) |
| 23:57.01 | tcccp | What would I do without you guys |
| 23:57.10 | tcccp | 1:57am - time for booting some linux on my pda ;) |
