| 00:00.39 | cr2 | hm. did somehting wrong. |
| 00:00.55 | cr2 | please, press 'listen' button |
| 00:01.10 | cr2 | ok |
| 00:02.01 | cr2 | 20 89 spam |
| 00:02.15 | cr2 | AC97_SYSCLK |
| 00:02.16 | cr2 | ok |
| 00:02.27 | cr2 | AC97_SDATA_OUT |
| 00:02.35 | cr2 | strange that ac97 is always active |
| 00:02.47 | cr2 | as if it plays constantly music |
| 00:03.05 | lama | I don't hear anything :> |
| 00:03.17 | lama | maybe it's volume setting? :P |
| 00:04.03 | cr2 | 90 91 and 30 |
| 00:05.02 | Kevin3 | miknix: pong |
| 00:05.27 | cr2 | lama: is the haret on sd card ? |
| 00:05.38 | cr2 | Kevin3: hi |
| 00:05.53 | cr2 | Kevin3: is it possible to do Output() without \n ? |
| 00:05.58 | Kevin3 | Hi cr2 |
| 00:06.04 | Kevin3 | Yeah.. |
| 00:06.32 | cr2 | i've ported the 'dump pxa27x', but it dumps raw bits. |
| 00:06.39 | cr2 | the output looks ugly. |
| 00:06.54 | cr2 | because of \n after each bit |
| 00:06.57 | Kevin3 | cr2: Put a \t at the end of the line. That will prevent a newline from being appended. |
| 00:07.11 | cr2 | ok, i'll try |
| 00:07.19 | Kevin3 | cr2: It's ugly, but it works. (That hack predates my involvement with haret.) :-) |
| 00:07.34 | cr2 | lol |
| 00:07.34 | lama | cr2: yes it's on clean 1gb sd |
| 00:08.08 | cr2 | lama: well, it's better to put in on the mdoc. but you can try to remove the SD card now |
| 00:09.12 | lama | ok I have card |
| 00:09.21 | cr2 | removed ? |
| 00:09.25 | lama | yes |
| 00:09.44 | cr2 | can you insert it now ? |
| 00:10.09 | lama | it is back |
| 00:10.18 | cr2 | ok. |
| 00:14.42 | *** join/#htc-linux lama_ (n=lama@ip-89-174-40-20.multimo.gtsenergis.pl) |
| 00:14.49 | lama_ | fsck :> |
| 00:15.06 | lama_ | everything dies on this weekend |
| 00:16.46 | lama | lag! |
| 00:18.26 | cr2 | hm. i think i have sd power. |
| 00:18.37 | cr2 | but there are some other 2 strange gpios |
| 00:19.30 | cr2 | ok. can you insert and remove the USB cable ? |
| 00:19.57 | cr2 | the usb to computer, not the usb power. |
| 00:20.10 | lama | I can |
| 00:20.21 | lama | it will active sync with windows : |
| 00:20.22 | lama | > |
| 00:20.25 | cr2 | ok |
| 00:20.34 | cr2 | do it |
| 00:20.50 | lama | done |
| 00:20.56 | cr2 | removed ? |
| 00:22.11 | lama | it's allredy connected to pc |
| 00:24.13 | cr2 | ok remove and insert it |
| 00:26.57 | lama | done |
| 00:27.01 | lama | one more time |
| 00:27.49 | cr2 | strange. |
| 00:27.55 | cr2 | i see only gpio40 |
| 00:28.07 | cr2 | which is probably the usb/power detect |
| 00:28.30 | cr2 | can you connect/disconnect the usb power supply instead ? |
| 00:28.35 | lama | yes |
| 00:28.37 | cr2 | ok |
| 00:28.53 | cr2 | you have 1.5 minutes :) |
| 00:28.58 | lama | done |
| 00:29.04 | lama | why 1.5? |
| 00:29.14 | cr2 | 60sec |
| 00:29.25 | lama | and my phone will blow up? |
| 00:29.33 | tcccp | inition sequence start |
| 00:30.03 | cr2 | 30 |
| 00:30.17 | cr2 | tcccp: lol |
| 00:30.30 | tcccp | houston, we have lift off |
| 00:30.41 | lama | is in vault |
| 00:30.44 | cr2 | tcccp: do you want a linload.exe for sable ? |
| 00:30.46 | lama | ready for fallout |
| 00:30.52 | tcccp | cr2: That would be just terrific |
| 00:30.55 | cr2 | timeout. |
| 00:31.05 | cr2 | tcccp: compiling |
| 00:31.57 | lama | cr2: what now |
| 00:33.41 | cr2 | lama: i'm thinking |
| 00:33.56 | cr2 | lama: a lot of information already. |
| 00:34.07 | lama | maybe I should plug usb keyboard |
| 00:34.15 | cr2 | Kevin3: does the pxa kernel support memory holes ? |
| 00:34.17 | lama | or change usb settings in phone |
| 00:34.46 | cr2 | Kevin3: this phone has 64MB @0xa0000000 and 64MB @0xb0000000 |
| 00:35.08 | lama | it can work as usb storage |
| 00:35.34 | Kevin3 | cr2: Someone on the haret mailing list had a similar issue on their phone. They had a pxa3xx device. |
| 00:36.01 | cr2 | Kevin3: sa1100 could do it many years ago. |
| 00:36.08 | lama | and there is usb to pc setting with "advanced network" or something like that |
| 00:36.11 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 00:36.17 | dcordes | hi |
| 00:36.17 | apt | moin moin |
| 00:36.20 | cr2 | lama: it does not matter. |
| 00:36.22 | dcordes | hi apt |
| 00:36.29 | dcordes | ,cr2, others. |
| 00:36.51 | dcordes | cr2: was just to checkout video call fifos |
| 00:37.04 | lama | cr2: as I have said earlier it has strange usb cable |
| 00:37.08 | dcordes | I can't find a video call function in my rom |
| 00:37.10 | cr2 | Kevin3: ok, the \n issue is resolved. |
| 00:37.28 | lama | pins number 5, 6 and 10 are used for charging |
| 00:37.49 | Kevin3 | cr2: From what I recall, the way wince got around it was to use memory from 0xac000000 - 0xb4000000. They got linux running using the same trick. |
| 00:37.50 | lama | where most of the phones have only 5 pins (?) |
| 00:38.48 | cr2 | Kevin3: ok, i'll start with 64MB first. |
| 00:39.37 | cr2 | Kevin3: hmm. i doubt that pxa27x has some SDRAM remapping capabilities |
| 00:40.32 | cr2 | tcccp: need to reformat miniSD ;) |
| 00:40.49 | tcccp | cr2: That's ok ;) |
| 00:41.04 | lama | my miniSD ?:P |
| 00:41.18 | tcccp | lama: shred(1) is nice ;) |
| 00:41.19 | dcordes | what are you guys hacking on? |
| 00:41.46 | tcccp | dcordes: I'm about to shoot my hp hw6915 if I cannot boot linux on it |
| 00:42.09 | Kevin3 | cr2: On this person's phone accessing the hole between 0xa4000000 - 0xafffffff caused accesses to 0xa0000000 - 0xa4000000. So, one could get a linear mapping of ram by pretending ram starts at 0xac000000. |
| 00:43.43 | dcordes | somebody knows how to do a video call in windows mobile 6? |
| 00:44.50 | cr2 | Kevin3: ok |
| 00:46.54 | cr2 | lama: i've updated the haret-w.exe |
| 00:47.56 | tcccp | cr2: I know exactly why I have taken my 2G miniSD card with me |
| 00:48.35 | tcccp | is not at his present home at the moment |
| 00:48.57 | cr2 | lama: install the new haret-w.exe |
| 00:49.33 | cr2 | tcccp: copying |
| 00:49.48 | lama | cr2: ok |
| 00:50.25 | lama | oh haret chrashed :> |
| 00:50.28 | tcccp | expecting ;) |
| 00:51.21 | lama | haret-w.exe 17-May-2008 17:46 141k |
| 00:51.28 | lama | is this newest? |
| 00:51.36 | lama | 17:46? |
| 00:51.45 | tcccp | which TZ? |
| 00:51.48 | lama | is server outside europe? |
| 00:51.53 | lama | tcccp: don't know |
| 00:52.02 | cr2 | f89da6c25964daa245fbe5735ba5ab16 haret-w.exe |
| 00:52.13 | cr2 | sf.net is in the US |
| 00:52.27 | tcccp | So it could be pacific standard time? |
| 00:52.51 | lama | cr2: heh, I'm using windows now there is no C:\Windows\System32\md5.exe lol |
| 00:53.01 | cr2 | tcccp: hm. made an error. recompiling.- |
| 00:53.17 | cr2 | lama: sha512 ? |
| 00:53.39 | tcccp | take your time - ich hab eh grad ne frau im query |
| 00:54.03 | lama | cr2: you can connect now |
| 00:55.21 | cr2 | tcccp: ok, it booted |
| 00:55.38 | cr2 | tcccp: but i don't have the root partition now ;) |
| 00:55.42 | cr2 | lama: ok. |
| 00:55.59 | cr2 | tcccp: what sd layout would you prefer ? |
| 00:56.03 | tcccp | erm? |
| 00:56.24 | cr2 | tcccp: the kernel booted, but there is no rootfs to mount ;) |
| 00:57.02 | tcccp | The loadlinux can start the kernel with a cmdline hm? |
| 00:57.25 | cr2 | lama: exceljent |
| 00:57.39 | cr2 | tcccp: no, the cmdline is hardcoded. |
| 00:58.09 | cr2 | tcccp: ok, let's check if it boots for you first. |
| 00:58.19 | tcccp | aye |
| 00:58.27 | tcccp | that would be terrific |
| 00:58.29 | cr2 | then you can just dump the rootfs on partitionless SD |
| 00:58.44 | cr2 | it boots for me(tm( |
| 00:58.55 | tcccp | I think I have enough forensic tools here to do any sort of pervert stuff ;) |
| 00:59.03 | cr2 | lol |
| 00:59.28 | cr2 | you only need to untar the rootfs to partitionless sd card. |
| 01:00.02 | tcccp | dd if=/dev/mmcblk0 of=iPaq2G.raw |
| 01:00.06 | tcccp | ;-) |
| 01:00.38 | tcccp | I love HPs internal cardreaders |
| 01:00.42 | dcordes | I need dutty rom |
| 01:01.15 | cr2 | lama: ok. i've finished for now. |
| 01:03.16 | dcordes | cr2: do you know where I can get dutty's stuff? |
| 01:03.23 | lama | ok, tx for your work :P |
| 01:03.55 | cr2 | tcccp: http://jonrada820.sf.net/files/haret |
| 01:04.00 | lama | I might not be available next week |
| 01:04.04 | cr2 | hm |
| 01:04.13 | tcccp | lolz |
| 01:04.21 | tcccp | cr2: I'm error-correcting, thanks ;) |
| 01:04.24 | cr2 | lama: ok, i'll try to create the kernel for g900 |
| 01:04.31 | cr2 | <PROTECTED> |
| 01:04.43 | cr2 | <PROTECTED> |
| 01:04.44 | tcccp | got it - thanks |
| 01:06.09 | cr2 | lama: the most important thing now is to find the touchscreen chip model. |
| 01:07.07 | cr2 | and i need to undestand why (and what for) they use 2 spi ports. |
| 01:07.32 | *** join/#htc-linux Othello (i=Magorium@gateway/tor/x-b2f4556abaa4ba55) |
| 01:08.14 | lama | cr2: when should I expect kernel to try? |
| 01:10.18 | tcccp | cr2: What's the kernel name the linload tries to boot? |
| 01:10.53 | tcccp | aaah! |
| 01:10.57 | tcccp | i love hexdump |
| 01:11.22 | tcccp | but what's %s? |
| 01:13.08 | tcccp | cr2: I'd kiss you if you were female |
| 01:13.12 | tcccp | cr2: boots just fine |
| 01:13.31 | tcccp | cr2: The kernel boots just fine till it's trying to mount root |
| 01:15.02 | tcccp | cr2: I just need the miniSD partition scheme and should be able to have something booting in no time at all |
| 01:16.09 | tcccp | aah |
| 01:16.28 | tcccp | zimage root=/dev/ram0 ro console=tty0 |
| 01:16.36 | tcccp | hexdump++; |
| 01:17.03 | tcccp | and from there mmcblk0p${int} I guess |
| 01:17.25 | tcccp | ah, root=/dev/mmcblk0 |
| 01:17.28 | tcccp | erm |
| 01:17.30 | tcccp | hmhm |
| 01:17.37 | tcccp | rootdelay=5, seen... |
| 01:17.38 | cr2 | tcccp: it's built for raw /dev/mmcblk0 |
| 01:17.48 | cr2 | but i can change it if you'd like |
| 01:18.10 | tcccp | Well the Debian on that miniSD is kinda flexible |
| 01:18.14 | cr2 | lama: hmm. good question. |
| 01:18.34 | tcccp | I'm Gentoo user so...I'm quite flexible, too doing nasty stuff with disks ;) |
| 01:19.07 | cr2 | tcccp: i didn't compile the modem tty discipline driver, because i have no clue if it works at all. you may check the test program by lkcl |
| 01:19.55 | tcccp | c'mon, 416MHz. This little piece of silicium can compile an own kernel as soon as I'm logged in ;) |
| 01:19.59 | cr2 | lama: watch the g900 wiki at hh.org. I'll post if i'll have something usable there. |
| 01:20.09 | lama | ok |
| 01:20.34 | cr2 | good night. |
| 01:20.44 | tcccp | good night cr2 and thanks! |
| 01:21.49 | tcccp | I have never tried to build a filesystem on a raw disk w/o partitions. |
| 02:25.38 | *** join/#htc-linux revertive (n=revertiv@83.119.75.151) |
| 02:38.15 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-272a82f4ea6e0d11) |
| 04:31.38 | *** join/#htc-linux mistadman (n=mistadma@adsl-6-115-67.msy.bellsouth.net) |
| 04:32.22 | mistadman | Hello! |
| 04:33.11 | mistadman | If anyone is interested, I have managed to get Android booting on the Athena: http://www.youtube.com/watch?v=HtlcCQSRmiA |
| 04:55.45 | *** join/#htc-linux LunohoD_ (n=alex@e180068092.adsl.alicedsl.de) |
| 05:02.45 | *** join/#htc-linux mistadman (n=mistadma@adsl-6-115-67.msy.bellsouth.net) |
| 05:23.07 | *** join/#htc-linux revertive (n=revertiv@83.119.75.151) |
| 06:37.57 | *** join/#htc-linux hlbot (n=adm@iclem.net) [NETSPLIT VICTIM] |
| 06:39.11 | *** join/#htc-linux NiZoX (n=nizox@eros.ph0k.eu) |
| 06:39.30 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) [NETSPLIT VICTIM] |
| 06:40.32 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) [NETSPLIT VICTIM] |
| 07:25.07 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8cab.pool.einsundeins.de) |
| 07:26.46 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 07:29.41 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 08:15.59 | *** join/#htc-linux p3t3r__ (n=p3t3r__@wlan.net-you.de) |
| 08:19.03 | *** join/#htc-linux mistadman (n=mistadma@adsl-6-115-67.msy.bellsouth.net) |
| 08:39.57 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 09:16.55 | *** join/#htc-linux mistadman (n=mistadma@adsl-150-63-28.msy.bellsouth.net) |
| 09:25.18 | *** join/#htc-linux exc1 (n=exco@e181078016.adsl.alicedsl.de) |
| 10:09.12 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 10:44.45 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1daa1.pool.einsundeins.de) |
| 10:45.06 | kiozen | hi |
| 10:45.06 | apt | hi, kiozen |
| 10:45.23 | kiozen | thanks apt, very polite |
| 10:45.23 | apt | kiozen: sure thing |
| 10:45.42 | kiozen | hey who gave drugs to apt? |
| 10:50.17 | kiozen | cr2: around? |
| 10:50.50 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 10:51.33 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 10:52.23 | cr2 | kiozen: yes. disassembling the driver, don't understand why it doesn't work. |
| 10:52.58 | kiozen | cr2: ok, got "sturmfrei" for a few days, anything I can do? |
| 11:00.34 | BabelO | hi |
| 11:01.23 | kiozen | apt say hi to BabelO! |
| 11:01.24 | apt | hi to BabelO! |
| 11:01.34 | kiozen | hi |
| 11:01.46 | BabelO | lol :) |
| 11:02.04 | BabelO | kiozen: it seem he say hello to first guy of the day saying hi or hello |
| 11:02.31 | kiozen | and I thought he is stalking me :) |
| 11:03.32 | BabelO | cr2: if i can help you on lcdspi :) |
| 11:05.18 | *** join/#htc-linux miknix (n=miknix@bl4-95-76.dsl.telepac.pt) |
| 11:20.51 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-d7732c43721b424a) |
| 11:21.28 | *** part/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-d7732c43721b424a) |
| 11:28.49 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 12:09.59 | BabelO | cr2: ts works :) |
| 12:10.08 | miknix | Kevin3, ping |
| 12:11.21 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 12:18.44 | *** join/#htc-linux snakefreak (n=snake@dyndsl-091-096-095-182.ewe-ip-backbone.de) |
| 12:20.06 | *** join/#htc-linux zwox_ (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 12:25.43 | *** join/#htc-linux zwox__ (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 12:36.13 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1daa1.pool.einsundeins.de) |
| 13:25.24 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 13:48.07 | *** join/#htc-linux pigeon_ (n=pigeon@218-214-60-232.people.net.au) |
| 14:05.01 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-d5ab7e35d11fc810) |
| 14:06.38 | *** join/#htc-linux SpiceKitty (n=Californ@113.73.71-86.rev.gaoland.net) |
| 14:07.48 | *** join/#htc-linux andy_js (n=andy_js@AAmiens-152-1-3-1.w83-192.abo.wanadoo.fr) |
| 14:07.52 | SpiceKitty | I dunno if this is the best channel to ask but, is it possible to transform a gsm in a talkie/walkie (regardless of the law) |
| 14:07.56 | SpiceKitty | ? |
| 14:08.20 | SpiceKitty | what would be the reach of such a device? |
| 14:11.38 | SpiceKitty | depending on the areas, are the frequencies band all occupied? |
| 14:20.58 | tcccp | Isn't there already a push-to-talk service in some regions? |
| 14:21.10 | tcccp | or provided by some providers? |
| 14:21.54 | tcccp | In Germany the providers praise it as a whole new invention ;) |
| 14:23.07 | cr2 | <PROTECTED> |
| 14:23.07 | apt | niihau, cr2 |
| 14:23.12 | tcccp | hi cr2!!!! |
| 14:23.28 | cr2 | you need a base station, and the handsets do frequency hopping. |
| 14:23.34 | tcccp | cr2: Booting the kernel went just fine - now I'm tweaking around the Debian on my disk |
| 14:24.05 | cr2 | there are some projects going in this direction, but they are surely under the radar. |
| 14:24.23 | cr2 | tcccp: ok. |
| 14:24.26 | tcccp | SpiceKitty: There are a couple of cellphones with a push-to-talk function. I'd advise to buy some cheap pmr walkies |
| 14:24.38 | tcccp | Single point of failure: No go ;) |
| 14:24.52 | dcordes | http://www.gnu.org/software/gnuradio/ |
| 14:26.01 | cr2 | a gsm handset is a personal tracking and money milking device. that were the design features. |
| 14:26.40 | tcccp | lol |
| 14:26.53 | tcccp | The gsm program on my iPaq is totally confused |
| 14:27.07 | tcccp | "no service" |
| 14:27.09 | dcordes | SpiceKitty: look at this http://wiki.thc.org/gsm |
| 14:28.10 | cr2 | SpiceKitty: in theory 35km (afair) |
| 14:29.16 | cr2 | SpiceKitty: but you need a complex infrastructure and a strong battery. and i doubt the handset will work at full power for a long time. |
| 14:29.51 | cr2 | it'll will die rather fast. |
| 14:30.45 | SpiceKitty | yep but the power could be adjusted to the desired range |
| 14:31.15 | cr2 | you need a base station anyway. |
| 14:31.37 | SpiceKitty | why? |
| 14:31.56 | cr2 | read http://wiki.thc.org/gsm first |
| 14:31.58 | SpiceKitty | sorry but it the two gsm can reach a distance |
| 14:32.43 | cr2 | even if they lie side by side, they can't really talk to each other.# |
| 14:32.56 | tcccp | SpiceKitty: Buy a walkietalkie set ;) |
| 14:33.04 | SpiceKitty | eh no |
| 14:33.21 | SpiceKitty | thats not regular |
| 14:33.30 | tcccp | thats unleaded? |
| 14:33.42 | SpiceKitty | why cant they really talk? |
| 14:33.49 | SpiceKitty | is that hardware related? |
| 14:33.58 | dcordes | then read everything at the link above and probably notice it's more work than you though it would be |
| 14:34.22 | SpiceKitty | I agree it is surely a big work |
| 14:34.28 | miknix | SpiceKitty, did you have a look at gsm infrastructure?http://en.wikipedia.org/wiki/GSM |
| 14:34.41 | SpiceKitty | ok |
| 14:34.50 | SpiceKitty | I retire this idea |
| 14:34.56 | miknix | SpiceKitty, as cr2 said, you cant simply put two stations communicating |
| 14:40.10 | tcccp | SpiceKitty: Wait till the x-tals have software encoded frequecies ;) |
| 14:41.10 | SpiceKitty | why? |
| 14:41.19 | SpiceKitty | I'm reading the projects page |
| 14:41.37 | tcccp | If there are cellphones with such a chip that can run linux for example, you should be able to somehow abuse it ;) |
| 14:42.40 | *** join/#htc-linux revertive (n=revertiv@83.119.75.151) |
| 14:49.08 | tcccp | haha |
| 14:49.12 | tcccp | debootstrap is stupid |
| 14:49.56 | tcccp | Every semi-intelligent programm would have noticed that an amd64 system cannot chroot into a arm directory structure |
| 14:53.22 | *** join/#htc-linux cods (n=cods@tuxee.net) |
| 14:55.17 | *** join/#htc-linux patoche (n=patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 15:01.02 | *** join/#htc-linux patoche (n=patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 15:05.19 | dcordes | cr2: what can I do to get the damn *.send fifos working? |
| 15:06.12 | cr2 | dcordes: repair haret tracing. |
| 15:07.17 | dcordes | I can't |
| 15:12.58 | dcordes | oh btw I should tell Kevin3 about the missing cpld register |
| 15:13.25 | miknix | oh |
| 15:13.33 | miknix | dcordes, you have an herald right? |
| 15:13.58 | dcordes | Kevin3: in regs_msm.py there is a line missing |
| 15:13.59 | dcordes | Regs_msm7500 = { 0xc0000000: ("IRQ", regOneBits("IRQ")), 0xc0000004: ("IRQ2", regOneBits("IRQ2")), |
| 15:14.23 | dcordes | miknix: no, kaiser |
| 15:15.02 | miknix | : \ I'm always mistaken with htc devices |
| 15:15.13 | dcordes | they are too many |
| 15:16.11 | dcordes | Kevin3: are there any news concerning msm mmutrace? |
| 15:17.53 | miknix | going to play homeworld 2 while the coffee doesnt make effect |
| 15:20.50 | dcordes | cr2: I do not understand why we found out how to make recv work w/o mmutrace but can't make the send work w/o mmutrace |
| 15:22.09 | snakefreak | anybody can me give a answer? when i buy a new (not orginal htc) akku/engine for my uni is it working with linux power display? |
| 15:22.43 | cr2 | dcordes: it was not me :) |
| 15:22.57 | cr2 | snakefreak: if this battery has ds2760 then yes. |
| 15:23.06 | snakefreak | ok^^ thx |
| 15:23.23 | cr2 | snakefreak: there are fake batteries around, that don't have it. |
| 15:23.28 | dcordes | cr2: you helped. iirc you looked up some values from the smem.dll |
| 15:23.40 | dcordes | or whatever that file is named |
| 15:23.57 | cr2 | dcordes: no, the values i've seen do not match. |
| 15:23.58 | dcordes | and what dzo gave me came from the smem dump |
| 15:23.59 | *** join/#htc-linux CVirus (n=GoD@196.205.193.11) |
| 15:24.05 | dcordes | ok |
| 15:24.27 | cr2 | smem on kaiser != smem on other 7500 phones. |
| 15:24.48 | cr2 | i don't have a smem dumped from a kaiser |
| 15:25.08 | cr2 | and it's complex anyway. |
| 15:25.27 | cr2 | tracing the sram access would have been easier. |
| 15:26.26 | dcordes | cr2: I know the regs differ along the various types of the msm7x00x and dzo looked them up from a kaiser, not vogue dump. no idea where he got it |
| 15:26.46 | dcordes | I always was assuming you already had smem dumps |
| 15:26.56 | dcordes | (From kaiser) |
| 15:29.33 | dcordes | cr2: may I send you some? |
| 15:30.36 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 15:33.48 | Kevin3 | miknix: pong |
| 15:33.58 | Kevin3 | dcordes: Nothing new - it'll take a bit of work. |
| 15:35.01 | dcordes | any way I can help? |
| 15:35.28 | miknix | Kevin3, I was testing the bbkeys on wizard |
| 15:36.08 | Kevin3 | dcordes: What's the failure situation again? What addresses are you trying to trace? What ends up happening? |
| 15:36.48 | dcordes | Kevin3: I can't mmutrace the shared memory locations on kaiser |
| 15:37.14 | dcordes | on vogue this is not the case. it works as it should there. don't know about titan and the others though |
| 15:38.51 | Kevin3 | miknix: I saw your note earlier about it not working. Any ideas? Are you able to trace accesses under wince? |
| 15:39.15 | Kevin3 | dcordes: More info would help a lot. Specifically, what commands do you run, and what ends up happening? |
| 15:39.26 | miknix | Kevin3, I added a userspace sysfs file that allows me to read/write to the cpld using bbkeys_read and write functions |
| 15:40.31 | miknix | Kevin3, http://pastebin.com/d71274cc |
| 15:41.29 | miknix | Kevin3, all regs seems to return 0xff even when directional keys are pressed |
| 15:43.35 | Kevin3 | miknix: We could have a different chip protocol in action here. Are you able to trace the gpios changing under wince? |
| 15:45.01 | miknix | Kevin3, no.. while watching in haret, leds dont even blink and if I press the touchscreen backlight doesnt turn on. |
| 15:45.54 | miknix | Kevin3, do your chip also work through i2c? |
| 15:48.26 | Kevin3 | miknix: I never tried, but I'm very sure it would not. My chip only takes less bits for address than is the standard. |
| 15:48.34 | miknix | hum.. |
| 15:49.00 | miknix | my chip seems to ack every i2c id we throw at it |
| 15:49.28 | miknix | but the protocol seems to be i2c compliant |
| 15:50.01 | miknix | Kevin3, have a look at drivers/i2c/algos/i2c-algo-bit.c |
| 15:50.34 | miknix | my chip understands that proto over the two bitbang gpios |
| 15:51.52 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 15:53.05 | snakefreak | i search a prog for win mobile i dont know the name but itsto oc it isnt xcpuscaler and not pocket hackmaster. anybody knows the name? |
| 15:53.49 | dcordes | Kevin3: I was just searching the logs. can't find it |
| 15:54.43 | dcordes | and now the xda wiki is down so I can't explain you the problem using kaiser memory map |
| 15:54.44 | BabelO | cr2: do you have special settings fir tsc2046 ? |
| 15:55.02 | dcordes | Kevin3: are you aware of the msm DEX? it is data exchange between arm9 and arm11 part of the chipset |
| 15:55.31 | dcordes | and I can't mmutrace these registers from wince |
| 15:57.38 | Kevin3 | dcordes: If you have the actual mmutrace commands that you issued, I can look through your mmudump and backtrace what is happening, and what should of happened. |
| 16:00.51 | dcordes | Kevin3: I'm looking in the log again |
| 16:24.42 | BabelO | cr2: perfect now :) ts works well on artemis, and my driver look generic |
| 16:32.02 | dcordes | Kevin3: http://rafb.net/p/8YwIsu63.html |
| 16:33.10 | cr2 | BabelO: great. will it work for miknix ? |
| 16:33.42 | BabelO | cr2: i think yes :) he test my last version before, and values were read |
| 16:34.05 | BabelO | cr2: now i need to understand the strange thing with bluetooth |
| 16:34.15 | BabelO | cr2: i hope suspend resume will not be too hard |
| 16:34.34 | BabelO | cr2: also trackball works, i found my bug :) |
| 16:35.10 | cr2 | nice |
| 16:38.48 | diogene31_ | is back |
| 16:40.09 | BabelO | welcome back diogene31_ |
| 16:40.22 | diogene31_ | BabelO: Hi there. |
| 16:46.29 | *** join/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
| 16:46.58 | *** part/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
| 16:53.12 | dcordes | cr2: got thedumps? |
| 17:05.12 | cr2 | dcordes: yes |
| 17:06.39 | dcordes | cr2: I think the descriptions are quite clear. I made the gps one after gps was in use and the at one after I (un)registred several times from the network |
| 17:08.19 | SpiceKitty | is gps available for elf? |
| 17:12.57 | dcordes | cr2: my current kaiser-smd.c fifo settings look like this http://rafb.net/p/EssFUP11.html and as I said I can read but not write. a cat /dev/smd0 shows the signal level and marbalon said he also sees something when he calls his kaiser. But when I do a cat /dev/smd0 & echo -e `ATV\r` > /dev/smd0 it returns nothing. I modified kaiser-smd.c so that I get a printk with head and tail on every write. Only head changes, not tail. |
| 17:23.17 | cr2 | dcordes: what about 'cu /dev/smd0' ? |
| 17:40.46 | lama | Hello World! |
| 17:50.47 | *** part/#htc-linux SpiceKitty (n=Californ@113.73.71-86.rev.gaoland.net) |
| 17:55.59 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 18:01.20 | miknix | Kevin3, still there? |
| 18:01.42 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 18:02.22 | dcordes | cr2: installing cu.. |
| 18:04.58 | *** join/#htc-linux andy_js (n=andy_js@AAmiens-152-1-3-1.w83-192.abo.wanadoo.fr) |
| 18:09.24 | Kevin3 | miknix: Yes. |
| 18:10.43 | miknix | Kevin3, which haret command do you use to look for gpio changes? watch gpios 10? |
| 18:12.34 | Kevin3 | miknix: No, you'll need to use mmutrace on the gpio registers. |
| 18:13.12 | miknix | Kevin3, ok, I'm going to try again.. but I dont think it will work |
| 18:18.00 | miknix | Kevin3, how do I calculate the gpio 69 and 70 register addresses? |
| 18:18.47 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 18:19.02 | pikapika | hi |
| 18:19.02 | apt | bonjour |
| 18:19.25 | BabelO | bonjour pikapika |
| 18:23.05 | Kevin3 | miknix: You need to look them up in the omap docs. |
| 18:24.02 | miknix | Kevin3, well.. haret shows some addresses for some gpios: GPIO4-IM=bfefffff GPIO5-IM=fffed7ff |
| 18:25.53 | Kevin3 | miknix: Haret has them in the file haretconsole/regs_omap.py |
| 18:26.10 | Kevin3 | If you know what addresses you want by the haret names, then you can find the actual address from that file. |
| 18:32.59 | miknix | Kevin3, from linux omap gpio.c : OMAP850_GPIO1_BASE 0xfffbc000 |
| 18:36.24 | Kevin3 | miknix: looking at regs_omap.py - I'd guess you want 0xfffbd000 - for gpios 64-95. |
| 18:36.33 | Kevin3 | So, it should be something like: addlist mmutrace p2v(0xfffbd000) 0x20 |
| 18:36.37 | Kevin3 | And then "wi 1". |
| 18:39.14 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
| 18:41.35 | miknix | Kevin3, doesnt work.. backlight doesnt even turn on during the trace |
| 18:56.08 | *** join/#htc-linux marbalon (n=balon@aege32.neoplus.adsl.tpnet.pl) |
| 19:07.40 | miknix | Kevin3, so I guess I'm going to use the i2c-cpld driver and modify it to export the gpio framework so that other boards can use it (herald) |
| 19:08.13 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 19:16.04 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 19:28.02 | Kevin3 | miknix: Okay. |
| 19:35.35 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 19:38.03 | *** join/#htc-linux akarki (n=Zsolt_Ka@67.99.190.162) |
| 19:38.15 | BabelO | ola Marex |
| 19:38.21 | Marex | hi BabelO |
| 19:38.47 | BabelO | Marex: all works better with 2.6.26 :) |
| 19:45.56 | BabelO | decoding panel timing :) |
| 19:50.43 | cr2 | BabelO: evil lcdspi ;) |
| 19:50.53 | cr2 | BabelO: but you have it easier |
| 19:51.41 | BabelO | cr2: i hope too ... suspend seem to go but not resume :( so it really need a module :) |
| 19:54.51 | cr2 | you have 8bit values, and send only. |
| 19:55.16 | BabelO | cr2: that s good, so a simple spi bitbang driver is ok, there is one in 2.6.26 |
| 20:01.51 | cr2 | where ? |
| 20:02.45 | BabelO | cr2: http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=drivers/spi/spi_bitbang.c;h=96cc39ecb6e234f7340fbeb62322ea1831ba9e0d;hb=5717922a1b8cc477f45a0f4f11fe619392ba7133 |
| 20:03.28 | BabelO | cr2: with that, on the client side you just need few command to send / receive data's |
| 20:04.41 | cr2 | ok, i've seen this monster |
| 20:05.38 | BabelO | cr2: not a monster :) |
| 20:07.28 | cr2 | BabelO: http://technology.timesonline.co.uk/tol/news/tech_and_web/article3945496.ece :) |
| 20:08.07 | BabelO | cr2: yes already seen it :) |
| 20:08.22 | cr2 | lol. it's a good idea to remove the battery often |
| 20:08.33 | BabelO | cr2: like the news google phone it will be able to make advice on phone with proximity |
| 20:09.04 | cr2 | hehe. it seems hima/ba will be the best phone soon. |
| 20:09.24 | cr2 | with modified omap fimrware of course. |
| 20:10.05 | BabelO | cr2: yes closer and closer to a good status |
| 20:11.54 | cr2 | SpiceKitty would like that: "The receivers together cost about £20,000 to rent per month." |
| 20:14.34 | BabelO | cr2: i m looking for the backlight ocation |
| 20:14.37 | BabelO | cr2: i m looking for the backlight location |
| 20:14.54 | cr2 | BabelO: is it not known ? |
| 20:15.04 | cr2 | BabelO: use my latest haret |
| 20:16.04 | BabelO | i have Kevin3 repo here is it in ? |
| 20:18.03 | *** join/#htc-linux mistadman (n=mistadma@adsl-072-148-088-137.sip.msy.bellsouth.net) |
| 20:18.50 | Kevin3 | BabelO: Master location for haret is cvs. I only periodically update the git repo. |
| 20:19.11 | BabelO | Kevin3: ok |
| 20:23.33 | cr2 | BabelO: http://jornada820.sf.net/files/haret/haret-w.exe |
| 20:24.11 | cr2 | BabelO: you don't need "dump pxa27x", but it also has 'pwrctl' |
| 20:24.23 | BabelO | cr2: thanks, i try it |
| 20:24.55 | cr2 | BabelO: so you can do "pwrctl BKL1: N" while tracing. |
| 20:24.59 | BabelO | cr2: did i tell you that leds on cpld are blonking by default ? first time i see that |
| 20:27.54 | cr2 | hx4700 too |
| 20:28.07 | cr2 | the non-asic3 leds. |
| 20:28.19 | BabelO | s/blonking/blinking/ |
| 20:28.38 | cr2 | for bt/wifi |
| 20:29.21 | BabelO | cr2: ok so that is normal, yes bt /wifi /gps led and another red led blinkingon the right( there is also a fix led on the right |
| 20:40.55 | BabelO | cr2: ok pwrctl works 0 is full 3 is dim |
| 20:41.39 | BabelO | cr2: but i use haretconsole, and i cant connect on second :( |
| 20:45.28 | BabelO | perfect lcd is now centered |
| 20:47.01 | cr2 | BabelO: listen 9998 |
| 20:47.09 | cr2 | BabelO: and then telnet |
| 20:47.26 | dcordes | cr2: cu /dev/smd0: system not found |
| 20:47.30 | cr2 | Kevin3: is it possible to put several haret commands on one line ? |
| 20:47.46 | cr2 | dcordes: cu -l /dev/smd0 |
| 20:48.13 | BabelO | cr2: ah ok not by default i try again |
| 20:48.53 | dcordes | cr2: permission denied\ line in use |
| 20:49.06 | dcordes | yes I'm root |
| 20:49.12 | cr2 | dcordes: chown uucp.uucp /dev/smd0 |
| 20:49.19 | cr2 | or |
| 20:49.26 | cr2 | chown root.uucp /dev/smd0 |
| 20:50.01 | cr2 | BabelO: i've done 'rm' on the lcdspi driver :) |
| 20:50.35 | dcordes | cr2: chown uucp.uucp /dev/smd0 && cu -l /dev/smd0: connected. |
| 20:50.56 | dcordes | seeing the modem output |
| 20:52.38 | cr2 | dcordes: type AT<enter> |
| 20:53.22 | BabelO | cr2: why ? bitbanging driver now ? |
| 20:53.51 | dcordes | cr2: this shows on every keypress the printk message I told you about (the one which prints head and tail of the at send fifo) and I get no feedback from the modem. |
| 20:54.15 | dcordes | only the messages which appear in a regular frequence |
| 20:54.33 | cr2 | dcordes: hm. then something is missing. |
| 20:54.42 | Kevin3 | cr2: No. |
| 20:55.34 | cr2 | Kevin3: ok |
| 20:56.05 | dcordes | cr2: sorry, but where is nothing missing? |
| 20:57.15 | BabelO | cr2: hm nothing on wi |
| 21:00.37 | cr2 | BabelO: mmutrace ? |
| 21:01.06 | BabelO | cr2: i do mmutrace on PWL and PWT register range |
| 21:03.39 | cr2 | BabelO: the backlight control was non-obvious to me. |
| 21:04.02 | BabelO | cr2: you see it in nk ? i did not see |
| 21:05.08 | lama | are there any free cpu overclocking/scaling utilites for pxa 27x and wince |
| 21:08.47 | BabelO | lama: maybe here http://www.pocketpcfreewares.com/en/index.php |
| 21:09.12 | lama | heh |
| 21:09.43 | dcordes | cr2: sorry I'm not patient enough and doing 10 things at a time. Could you look at the dumps? |
| 21:10.09 | dcordes | maybe it's easy for you to tell the correct send fifo values |
| 21:14.17 | cr2 | lama: linux. |
| 21:14.52 | cr2 | dcordes: i see some blocks of common structure there. |
| 21:14.56 | lama | heh for the second time |
| 21:18.19 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8cab.pool.einsundeins.de) |
| 21:20.16 | dcordes | cr2: what do the asterisks in hexdump -C signify? |
| 21:23.24 | dcordes | hi Zoolooc. You are using dutty windows mobile rom, aren't you? |
| 21:23.52 | miknix | dcordes, data repeat |
| 21:23.53 | Zoolooc | hi |
| 21:24.03 | Zoolooc | dcordes: yes |
| 21:24.14 | dcordes | Zoolooc: can you make video calls in it? |
| 21:24.33 | Zoolooc | dcordes: never tried |
| 21:24.48 | dcordes | Zoolooc: did you ever try making one in your stock rom? |
| 21:25.12 | Zoolooc | dcordes: no |
| 21:25.38 | Zoolooc | as they charge extra money for that, in my contract |
| 21:25.40 | dcordes | ok thank you |
| 21:25.59 | cr2 | dcordes: repeating values. you can disable it with a flag. |
| 21:26.02 | dcordes | I see. I heard as for vodafone it costs the same as a normal call |
| 21:26.13 | mistadman | Hello all! Are the forums down? |
| 21:27.25 | dcordes | cr2: so when there is a register which has only zeros in it and the next register(s) also have only zeros there is an asterisk instead of them? |
| 21:28.00 | dcordes | mistadman: looks like it. Also wiki |
| 21:28.33 | cr2 | dcordes: not registers, but memory areas |
| 21:28.38 | mistadman | Crap! Thanks dcordes! |
| 21:28.46 | mistadman | Who here has an Athena? |
| 21:30.06 | martin__ | Did anyone ever set up a repository for the android hacking stuff, or is it all just loose patches and builds floating around? |
| 21:30.32 | martin__ | I'm interested in helping with drivers, got a Kaiser. |
| 21:30.43 | dcordes | martin__: no we finally have a home for them at git.linuxtogo.org |
| 21:31.01 | martin__ | dcordes: Thanks. I'll pull what's there and try booting. |
| 21:31.16 | mistadman | martin_: http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=summary |
| 21:31.31 | dcordes | right, branch htc-msm |
| 21:32.49 | mistadman | How do we start a branch for the Athena? |
| 21:35.47 | martin__ | Cloning now, ta. |
| 21:35.51 | cr2 | mistadman: you are bashing BabelO to port the htc-egpio config :) |
| 21:36.36 | BabelO | cr2: lol, i ve done it for 2.6.26, before doing git reset --hard :), but i can do it again |
| 21:37.40 | cr2 | BabelO: that would be great. athena and n560 do not depend on asic3, so there is no need for legacy stuff there. |
| 21:38.18 | mistadman | cr2: No... I just figured since I have Android booting on the Athena, this would be a good time to get everyone involved! |
| 21:47.34 | BabelO | hmm all dxa is down |
| 21:57.08 | dcordes | cr2: can you tell me why recv.buffer value is 0x32424? |
| 21:57.19 | dcordes | I'm trying to understand the fifo setup |
| 22:01.01 | dcordes | cr2: recv.start value is quite obvious to me because the line with the first data of AT values contains it |
| 22:03.02 | cr2 | 32424 ? |
| 22:03.36 | cr2 | dcordes: is see two types of areas |
| 22:03.40 | dcordes | <PROTECTED> |
| 22:04.15 | cr2 | dcordes: 0x20000000 0x01010100 |
| 22:05.21 | cr2 | dcordes: 0x02000000 0x00010000 |
| 22:05.39 | cr2 | hm |
| 22:05.47 | cr2 | 0x02000000 0x01010100 |
| 22:05.52 | cr2 | 0x02000000 0x00010000 |
| 22:06.37 | cr2 | 0x02000000 0x02000000 |
| 22:06.45 | cr2 | this one at the beginning |
| 22:09.26 | cr2 | dcordes: do you have some wiki mirror ? |
| 22:10.17 | dcordes | cr2: :( |
| 22:10.33 | dcordes | that's a todo |
| 22:14.49 | dcordes | cr2: so what are the values you pasted? |
| 22:15.28 | cr2 | they always start the area |
| 22:15.52 | cr2 | val1 val2 0 val3 val3 0 *data |
| 22:16.27 | cr2 | look before the 0x2000 data blocks of AT_tx AT_rx and GPS_rx |
| 22:16.38 | *** join/#htc-linux MHazem (n=GoD@82.201.174.179) |
| 22:16.54 | cr2 | val1 is always 0x02000000 |
| 22:20.11 | dcordes | cr2: I don't see any 2000000 |
| 22:21.24 | martin__ | Anyone have a sensible kernel .config for the kaiser? |
| 22:24.31 | cr2 | 0x02000000 |
| 22:25.54 | cr2 | ok, 60640 is some common area. i've see it in smem |
| 22:27.27 | cr2 | up to 6A* |
| 22:27.27 | dcordes | martin__: http://linuxtogo.org/~lgorris/htckaiser.config |
| 22:27.38 | cr2 | some 'Unnamed task' |
| 22:27.44 | martin__ | dcordes: thanks. |
| 22:27.46 | cr2 | structures |
| 22:28.08 | dcordes | cr2: in the wince library? |
| 22:28.26 | cr2 | no. in sram |
| 22:28.41 | cr2 | 0xfc000 has some internal data |
| 22:28.45 | cr2 | like CID |
| 22:28.57 | cr2 | and probably imei |
| 22:29.34 | cr2 | and some weird things at 0xfd000 |
| 22:30.21 | dcordes | but at 0xfc000 there's not much data |
| 22:30.45 | dcordes | cr2: I noticed the abc area before |
| 22:34.40 | cr2 | dcordes: what is inside struct smd_buffer |
| 22:35.48 | dcordes | cr2: you mean the at? send or recv? |
| 22:36.33 | dcordes | http://rafb.net/p/gup8Fh33.html |
| 22:36.33 | dcordes | here's the whole of it |
| 22:36.37 | dcordes | my current kaiser-smd.c with which I had the described results from cu |
| 22:39.18 | cr2 | ok, head and tail |
| 22:44.48 | cr2 | 0x04200); //changed from 0x04208 ? |
| 22:45.22 | *** join/#htc-linux amd64lover (n=miknix@81.193.89.117) |
| 22:47.01 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 22:48.17 | snakefreak | good night |
| 22:48.49 | cr2 | dcordes_: why did you cnage it ? |
| 22:49.16 | dcordes_ | it seemed more logic to me |
| 22:50.24 | cr2 | why ? |
| 22:50.45 | cr2 | dcordes_: which channel is gps ? it's structure is the same as at_rx |
| 22:51.37 | dcordes_ | cr2: I did copy the structure from the others |
| 22:51.48 | dcordes_ | you said it was channel 7 so I put it in the comment |
| 22:51.56 | dcordes_ | and the start value which I could look |
| 22:52.15 | dcordes_ | s/look/look up easily in the dump/ |
| 22:52.57 | cr2 | <PROTECTED> |
| 22:52.58 | dcordes_ | and I put only recv because you said you think send is done through the AT send. |
| 22:53.24 | cr2 | } else { |
| 22:53.29 | cr2 | has some strange values |
| 22:53.59 | dcordes_ | if is the AT and else the modem data afaik |
| 22:54.18 | cr2 | do you have umts data ? |
| 22:56.23 | cr2 | ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL); |
| 22:56.35 | cr2 | i suspect wince uses sram for that too. |
| 22:57.18 | dcordes_ | if you ask for a dump with umts data in it, no |
| 22:57.21 | cr2 | need to look closer at +0x60xxx area |
| 22:57.36 | dcordes_ | the modem data values are also from dzo who has them from some kaiser dump |
| 22:57.45 | cr2 | dcordes_: hm. we need a dump with all possible data. |
| 22:57.56 | dcordes_ | ok they don't cost anything |
| 22:58.09 | cr2 | btw, do you have a link to the dzo driver ? |
| 22:58.10 | dcordes_ | just tell me what we need. |
| 22:58.17 | dcordes_ | what driver? |
| 22:58.20 | cr2 | he has CDMA data channel |
| 22:58.21 | cr2 | smd |
| 22:58.37 | dcordes_ | well that is the dzo in the pastebin I guess |
| 22:58.58 | cr2 | i think if (n== 0) {}else {} should be done better. |
| 22:59.04 | dcordes_ | he gets the at channel plus a data channel and the rest he does in the android userland |
| 22:59.06 | cr2 | he has 2 channels ? |
| 22:59.12 | cr2 | 0 and 1 ? |
| 22:59.23 | dcordes_ | I also have more than one |
| 22:59.30 | dcordes_ | I thought the if and else are the two channels.. |
| 22:59.54 | dcordes_ | hold on i'm still in the angstrom. how do I end the cu session? |
| 23:00.01 | cr2 | but where is gps in your picture ? |
| 23:00.07 | cr2 | ~. |
| 23:00.08 | apt | . |
| 23:00.16 | cr2 | \~. |
| 23:00.25 | cr2 | ~lart apt |
| 23:00.25 | apt | takes a big bite out of cr2's jugular vein |
| 23:00.54 | dcordes_ | ouch |
| 23:00.58 | dcordes_ | I do not have the ~ |
| 23:01.03 | dcordes_ | \ is camera1 :D |
| 23:01.33 | cr2 | the 0x60xxx looks like some array of structures. |
| 23:01.36 | *** join/#htc-linux Dreadddddd (i=nofear@79.124.197.8) |
| 23:02.51 | dcordes_ | cr2: rebooting.. there's that file in /proc/ which tells you what nodes "should be there". it had two I think |
| 23:03.21 | Dreadddddd | cr2 hi man ) |
| 23:03.30 | cr2 | hi Dreadddddd |
| 23:03.48 | Dreadddddd | remember me ? :) |
| 23:04.14 | cr2 | yeah, you like weird qualcomm chipsets :) |
| 23:04.47 | *** part/#htc-linux patoche (n=Patrice@lns-bzn-30-82-253-137-194.adsl.proxad.net) |
| 23:05.00 | Dreadddddd | yep) |
| 23:06.24 | Dreadddddd | cr2 http://forum.modopo.com/diskussionen-rund-ums-modding/t-19197-ef81-qc-bqs-firmware-analyzer/page43.html |
| 23:06.47 | Dreadddddd | u read this forum time to time? |
| 23:07.00 | BabelO | cr2: http://pastebin.ca/1022271 |
| 23:07.22 | dcordes_ | ah a person who likes to dig in pinocchio kernels :) |
| 23:08.40 | cr2 | Dreadddddd: they are more about rsa sigs, than about tech details. |
| 23:09.35 | cr2 | dcordes_: pinocchio kernel has 14 segments. 2 of them thumb i think. only one of them make _real_ sense to me :) |
| 23:09.42 | Dreadddddd | Dreadddddd viperbjk soft help u to work with your pda? |
| 23:10.18 | cr2 | Dreadddddd: not really, we don't go so deep. |
| 23:10.47 | cr2 | Dreadddddd: and it's all thumb code there, which is pita |
| 23:12.04 | cr2 | BabelO: what about SWDT ? |
| 23:12.07 | Dreadddddd | cr2 do u know something about htc dream? |
| 23:12.07 | cr2 | OMAP730 Watchdog seems to be activated, disabling it for now. |
| 23:12.32 | dcordes_ | cr2: why does halibut defconfig include the thumb support? |
| 23:13.25 | cr2 | Dreadddddd: no, but if it's an msm7201A then you'll find a lot of data about it in the linux-msm branch |
| 23:13.27 | BabelO | cr2: yes, i did not try, i have to enable timer 32k too |
| 23:13.46 | cr2 | dcordes_: don't know. |
| 23:14.00 | cr2 | dcordes_: does your kernel really control msm gpios ? |
| 23:14.03 | dcordes_ | cr2: is it possible/likely that thumb code is used on the arm11 side? |
| 23:14.29 | cr2 | dcordes_: i don't see any practical reason to do it. |
| 23:14.47 | dcordes_ | ok maybe that's intersting that they build it then |
| 23:16.00 | cr2 | Dreadddddd: looks like old zaurus sl5500 on the pics |
| 23:16.19 | Dreadddddd | ? |
| 23:16.27 | cr2 | htc dream |
| 23:16.28 | Dreadddddd | u read my mind? |
| 23:16.35 | Dreadddddd | no) |
| 23:16.50 | dcordes_ | cr2: somebody once told me it only controlled "virtual" gpios. Can't remember if that was relating to the build in gpios or to the cpld gpios |
| 23:16.54 | Dreadddddd | i have another question |
| 23:17.08 | cr2 | Dreadddddd: ok |
| 23:18.01 | cr2 | Dreadddddd: no |
| 23:22.03 | cr2 | Dreadddddd: htc only produces phones afaik |
| 23:22.18 | Dreadddddd | no pda? |
| 23:24.10 | Dreadddddd | interesting.. |
| 23:30.58 | dcordes_ | cr2: 0x60xxx are encrypted structures? |
| 23:31.43 | dcordes_ | 00062330 74 e7 c5 00 55 6e 6e 61 6d 65 64 20 54 61 73 6b |t...Unnamed Task| |
| 23:33.05 | *** join/#htc-linux noelcragg (n=noel@adsl-68-123-47-170.dsl.pltn13.pacbell.net) |
| 23:33.10 | *** part/#htc-linux noelcragg (n=noel@adsl-68-123-47-170.dsl.pltn13.pacbell.net) |
| 23:36.50 | martin__ | Okay, I've got a kernel built. Is there an initrd handy that'll just give me a shell? |
| 23:38.36 | dcordes_ | martin__: uploading |
| 23:40.50 | martin__ | and standard haret 0.5.1 should work, yes? |
| 23:41.08 | dcordes_ | just grab the latest version |
| 23:41.15 | dcordes_ | do you know the kaiser linuxt xda forum thread? |
| 23:41.51 | martin__ | I've seen it, I just find it incredibly hard to find info in forum threads |
| 23:42.03 | dcordes_ | I'm not a fan of them either |
| 23:42.08 | martin__ | where half the posts are from people asking dumb questions |
| 23:42.45 | martin__ | I only found out any of this was going on because a friend of mine had seen a video on youtube |
| 23:43.01 | martin__ | it would be good to put up a status page. |
| 23:46.50 | dcordes_ | martin__: http://linuxtogo.org/~lgorris/kaiser/ |
| 23:47.30 | martin__ | dcordes_: great, thanks. |
| 23:48.29 | BabelO | cr2: i m trying sirfmon |
| 23:48.54 | cr2 | lol |
| 23:49.06 | cr2 | BabelO: just wanted to ask you about the gps speed :) |
| 23:49.07 | BabelO | cr2: what i need to do ? |
| 23:49.12 | martin__ | now did synce ever get anywhere, or do i need to reboot to windows to put stuff on this thing now... |
| 23:49.15 | BabelO | cr2: :) |
| 23:49.22 | cr2 | BabelO: nmea is at 9600 ? |
| 23:49.28 | BabelO | cr2: but it seem i ve a bad baud rate |
| 23:49.37 | BabelO | cr2: no i think 4800, i set that on all software |
| 23:49.40 | cr2 | BabelO: which tty do you have for gps ? |
| 23:49.54 | cr2 | BabelO: n560 has 9600 |
| 23:49.55 | BabelO | cr2: /dev/ttyS1 |
| 23:49.59 | cr2 | ok |
| 23:50.07 | cr2 | stty -F /dev/ttyS1 |
| 23:50.39 | BabelO | cr2: speed 9600 baud; |
| 23:50.42 | cr2 | BabelO: Could not detect SRAM size ? |
| 23:50.59 | BabelO | cr2: yes i know, i ve to look at this one, was working with hh kernel |
| 23:50.59 | cr2 | BabelO: stty -F /dev/ttyS1 speed 4800 ; cat /dev/ttyS1 |
| 23:52.02 | dcordes_ | martin__: I'm not sure what you mean |
| 23:52.14 | BabelO | cr2: looks bad http://pastebin.ca/1022299 |
| 23:52.15 | cr2 | BabelO: if it'll work, you only need to start gpsd. |
| 23:52.23 | BabelO | i think i miss something while setup uart |
| 23:52.41 | cr2 | BabelO: ok. stty -F /dev/ttyS1 speed 57600 |
| 23:52.57 | cr2 | then try 'od -x /dev/ttyS1' |
| 23:52.57 | martin__ | dcordes_: i.e. is there a working tool to transfer files over activesync from linux. |
| 23:53.09 | BabelO | cr2: better :) |
| 23:53.34 | dcordes_ | martin__: synce. I use sd card |
| 23:53.57 | BabelO | cr2: ok trace are good with cat but gpsd /dev/ttyS1 |
| 23:55.18 | BabelO | ok starting sirfmon now |
| 23:55.30 | cr2 | BabelO: so it's using 57600 ? |
| 23:55.39 | BabelO | cr2: yes it use 57600 |
| 23:55.41 | BabelO | for nmea |
| 23:55.42 | cr2 | ok. |
| 23:56.11 | BabelO | that s strange, i have other settings in wince |
| 23:56.24 | cr2 | wince == dumb |
| 23:56.29 | BabelO | cr2: what i need to do in sirfmon ? |
| 23:56.39 | cr2 | nonthing. |
| 23:56.43 | cr2 | just watch |
| 23:56.51 | BabelO | ok so nothing appear :) |
| 23:57.00 | cr2 | strange |
| 23:57.08 | cr2 | telnet localhost gpsd ? |
| 23:59.07 | BabelO | cr2: when pressing enter GPSD appear |