00:07.01 | BabelO | cr2: maybe i need mutex something |
00:11.01 | cr2 | BabelO: you have multiple writers ? |
00:12.01 | BabelO | cr2: normally only this ts driver |
00:12.31 | BabelO | but according to what happen, it seem yes i have multiple writer |
00:12.45 | cr2 | hmm. |
00:12.54 | cr2 | too late to understand it ;) |
00:13.04 | BabelO | cr2: OK? FOR ME TOO |
00:13.08 | BabelO | oups caps |
00:13.19 | BabelO | good night :) |
00:15.15 | cr2 | good night |
00:25.45 | cr2 | dcordes: still not sleeping ? |
00:27.53 | BabelO | cr2: this make me crazzy :) |
00:29.22 | dcordes | cr2: no I'm watching indiana jones and the temple of doom |
00:29.24 | cr2 | BabelO: lcdspi ;) |
00:29.44 | cr2 | dcordes: what addresses did you put into smem ? |
00:29.50 | cr2 | smd |
00:29.58 | dcordes | you mean for the AT fifo? |
00:30.35 | cr2 | yes |
00:31.03 | dcordes | <PROTECTED> |
00:31.06 | dcordes | <PROTECTED> |
00:31.09 | dcordes | <PROTECTED> |
00:31.11 | dcordes | <PROTECTED> |
00:31.14 | dcordes | <PROTECTED> |
00:31.17 | dcordes | <PROTECTED> |
00:32.08 | dcordes | send must be bogus |
00:32.18 | dcordes | or it's something else |
00:32.58 | cr2 | ok |
00:33.03 | cr2 | One Blue Screen Per Child |
00:33.50 | dcordes | all talked about obpc |
00:34.57 | cr2 | good idea, bad implementation |
00:35.02 | cr2 | ok. good night |
00:35.34 | dcordes | good night cr2 |
00:52.44 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-749b82d933cc2922) |
01:10.18 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
01:22.50 | *** join/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
01:27.32 | *** join/#htc-linux Marex (n=Marex@85-132-216-250-eth3-gwfm10-user.802.cz) |
01:46.15 | *** part/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
02:04.43 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
03:57.14 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
04:16.35 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
04:41.14 | *** join/#htc-linux CVirus (n=GoD@196.205.193.11) |
05:06.41 | *** join/#htc-linux kiozen (n=oeichler@p54929C20.dip0.t-ipconnect.de) |
05:34.56 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
06:02.58 | *** join/#htc-linux andy_js (n=andy_js@AAmiens-152-1-55-83.w83-198.abo.wanadoo.fr) |
06:02.59 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
06:21.06 | *** join/#htc-linux patoche (n=patoche@77.197.6.96) |
06:35.26 | *** join/#htc-linux CVirus (n=GoD@196.205.193.11) |
06:46.49 | *** join/#htc-linux paulproteus (n=paulprot@wide-rose.makesad.us) |
07:15.58 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
07:27.58 | *** join/#htc-linux Babel1 (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
07:57.49 | kiozen | hi BabelO_, think we have another problem with the nsi installation |
07:58.13 | BabelO_ | hi kiozen, too much windows version :) |
07:59.15 | kiozen | BabelO_: I fear we need the complete FWTools stuff, I get some peculiar projection errors on win32 |
08:00.03 | kiozen | BabelO_: but I would prefere to ask the user if one wishes to install FWTools, |
08:00.23 | kiozen | BabelO_: on yes FWTools is downlaoded and installed from the official site. |
08:00.27 | BabelO_ | kiozen: so, i keep the fwtools install downloader |
08:01.08 | BabelO_ | kiozen: you just have to uncomment the line, but next problem is to know where it is installed, have to ask user to do that |
08:01.22 | kiozen | BabelO_: and the QLGT dist. just have a *bat to setup environment when starting GT |
08:01.22 | BabelO_ | or easier is to only use default |
08:02.00 | BabelO_ | kiozen: but looks bad two windows :( |
08:02.03 | kiozen | BabelO_: FWTools has it's own installer |
08:02.19 | BabelO_ | kiozen: yes i know, if you look in nsi at FWTools section |
08:02.25 | BabelO_ | you have few line in comment |
08:02.39 | kiozen | BabelO_: ok I try.. |
08:02.50 | BabelO_ | kiozen: it is an automatic fwtools download / start install |
08:03.09 | kiozen | BabelO_ can we do it optional? |
08:03.40 | BabelO_ | kiozen: sure as it is a section, one can unselect it |
08:04.19 | BabelO_ | kiozen: just remove the two File FWTools\* line and uncomment beside ; Don't do it if we can package install |
08:08.54 | kiozen | BabelO_: ok that works for FWTools. |
08:09.35 | BabelO_ | kiozen: :) |
08:11.28 | kiozen | BabelO_: next: How do I start an app and setup the environment first as it is done in setfw.bat |
08:11.49 | kiozen | BabelO_: however without that nasty console window next to GT |
08:12.26 | BabelO_ | kiozen: to setup environment for user, easy way is to set PATH for current user, by adding GT / FWTools to its PATH |
08:13.32 | kiozen | BabelO_: setfw.bat does a hell more than that. |
08:13.54 | BabelO_ | kiozen: i look what it do |
08:16.36 | BabelO_ | kiozen: ok it is just some variable settings |
08:17.02 | BabelO_ | kiozen: only thing that i dislike is if the user install fwtools in a non standard path |
08:17.48 | kiozen | BabelO_: can't the installer search for it after the install, or read the registry? |
08:18.00 | BabelO_ | kiozen: yes, all is possible :) |
08:18.16 | kiozen | BabelO_: I know, it's just the pain :) |
08:27.19 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
08:30.40 | *** join/#htc-linux CVirus (n=GoD@196.205.193.11) |
08:34.03 | BabelO_ | kiozen: ok just added variable :) |
08:35.51 | kiozen | BabelO_ mail? or do you fix the path problem, too ? |
08:36.48 | BabelO_ | kiozen: testing in virtual machine :) i learn with windows that if you empty some registry key like PATH, then windows never reboot at all :) |
08:37.11 | kiozen | BabelO_: lol |
09:12.17 | *** join/#htc-linux no2chem (n=no2chem@ip70-187-171-149.oc.oc.cox.net) |
09:12.29 | no2chem | hrm. interesting.. anyone here?... |
09:12.51 | no2chem | thats um, familiar with disassembly? |
09:18.29 | *** join/#htc-linux ChanServ (ChanServ@services.) |
09:18.29 | *** join/#htc-linux patoche (n=patoche@77.197.6.96) [NETSPLIT VICTIM] |
09:18.29 | *** join/#htc-linux NiZoX (n=nizox@eros.ph0k.eu) |
09:18.29 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
09:19.46 | *** join/#htc-linux ChanServ (ChanServ@services.) |
09:19.46 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
09:48.11 | *** join/#htc-linux exc1 (n=exco@e181067045.adsl.alicedsl.de) |
10:10.22 | *** join/#htc-linux zooloo1 (n=lucian@nrbg-4dbf9552.pool.einsundeins.de) |
10:21.53 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-c8bffe0fefa2183c) |
10:47.51 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
11:10.56 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
12:05.58 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
12:33.29 | dcordes_ | cr2: wiki is back up. can you tell me something about the titan gpio setup? iirc dzo said it is similar/same as vogue gpio- |
12:33.51 | dcordes_ | or was that just the memory map? |
13:15.29 | *** join/#htc-linux revertive (n=revertiv@83.119.75.151) |
13:20.35 | tcccp | surrenders |
13:20.46 | tcccp | Does somebody have a working kernel for the HP iPaq hw6915? |
13:23.11 | dcordes_ | in kaiser-smd.c in the fifo regs I currently have 0x04208 as send.start register. but when I look at my dump it looks like 00004200 should be the correct value |
13:23.20 | dcordes_ | 0x04200 |
13:23.42 | dcordes_ | maybe that's why we can talk to the modem |
13:23.49 | dcordes_ | s/can/can't/ |
13:28.10 | dcordes_ | in recv buffer, which actually works the .start address is 32430 and that's the line in the hexdump which carries the first info in the buffer |
13:28.33 | dcordes_ | 00032430 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 |FFFFFFFFFFFFFFFF| |
13:29.17 | dcordes_ | I don't understand why .buffer is 32424 though |
13:29.26 | dcordes_ | I can't see 32424 in the hexdump |
13:29.36 | dcordes_ | it's something close before the .start |
13:30.37 | dcordes_ | so when I put 04200 as .start in send fifo, what would I put as .buffer in the send?? |
13:31.01 | dcordes_ | i can't look it up in the dump because there is no obvious parallel to the recv |
13:31.10 | dcordes_ | somebody able to hint? |
13:34.21 | *** join/#htc-linux revertiv1 (n=revertiv@83.119.75.151) |
13:41.05 | dcordes_ | hmmrmmmhm maybe I should just put the same offset from send.start to send.buffer as in recv.start to recv.buffer |
13:41.24 | dcordes_ | assuming that's right in send since it works |
13:41.30 | dcordes_ | s/send/recv/ |
13:52.14 | dcordes_ | http://wiki.xda-developers.com/index.php?pagename=Titan_GPIO |
13:57.05 | dcordes_ | cr2: how to find out which is GPS recv and which is GPS send buffer? |
13:57.11 | dcordes_ | s/buffer/fifo/ |
14:04.30 | dcordes_ | gps fifos size is 0x2000 |
14:05.02 | dcordes_ | strange that there's only one fifo full in the dump with gps stuff unlike at |
14:05.27 | cr2 | dcordes_: alt for the titan_gpio may be different |
14:05.41 | cr2 | the gps tx fifo may not exist. |
14:06.04 | dcordes_ | cr2: because the only thing we send to gps is on/off? |
14:06.08 | cr2 | have you logged the ATCMD data ? do you have the +htcagps=5 there ? |
14:07.09 | dcordes_ | what do you mean ATCMD? I have a dump with full AT buffers and one with full GPS buffers |
14:07.35 | dcordes_ | s/GPS buffers/GPS buffer(s)/ |
14:08.00 | cr2 | you can enable AT logging in registry |
14:08.17 | dcordes_ | ah right I remember. no didn't enable that. I asked you for the reg editor yesterday |
14:08.24 | cr2 | which will create \temp\atdbg* file will all commands sent to the phone. |
14:08.32 | cr2 | phm.lu |
14:08.53 | cr2 | http://www.phm.lu/Products/PocketPC/RegEdit |
14:09.02 | dcordes_ | ok what do we need the info for? |
14:09.07 | dcordes_ | in the AT logs? |
14:10.36 | cr2 | the list of commands |
14:11.01 | dcordes_ | ok. what about my above question concerning send.buffer? |
14:11.50 | cr2 | i have no idea where do these numbers come from. |
14:12.02 | cr2 | i see different numbers in smem.dll |
14:12.17 | dcordes_ | they are from the dump with filled at buff |
14:12.31 | cr2 | need to ask marbalon about the testwm5'd version of smem.dll |
14:12.59 | cr2 | the buffer is ok, i mean the .head .tail |
14:13.07 | dcordes_ | the send? |
14:13.40 | cr2 | send ? |
14:13.48 | dcordes_ | send buffer |
14:13.56 | cr2 | btw, can you check the sim insert gpio ? i think it's 0x5c |
14:14.04 | cr2 | at send buffer ? |
14:14.34 | dcordes_ | yes |
14:15.15 | dcordes_ | sim is uncheckable: openning the sim bay causes an immedeate shutdown |
14:15.52 | dcordes_ | well maybe I Will see the gpio in haret nevertheless |
14:17.32 | majorburn | defeat the switch |
14:18.49 | dcordes_ | cr2: can't you look up the correct .send values in smem.dll? |
14:22.36 | dcordes_ | cr2: I'm getting no \temp\atdbg* |
14:22.49 | dcordes_ | there's only oPackage in my \temp |
14:23.04 | dcordes_ | connected/disconnected from the network a few times |
14:23.23 | dcordes_ | trying to see it with total commander+# |
14:25.20 | dcordes_ | cr2: no \temp\at* in tc either |
14:26.24 | dcordes_ | tc also can't find files with atdbg |
14:26.43 | cr2 | hm. i think sim gpio can be disabled by a cpld gpio |
14:26.56 | dcordes_ | what about File Index = 0 ? |
14:26.59 | dcordes_ | in the reg |
14:27.02 | cr2 | you have done a soft reset after editing the registry and saving ? |
14:27.11 | cr2 | only enable=1 |
14:27.13 | dcordes_ | negative |
14:28.14 | dcordes_ | there's a new version of tc btw |
14:31.20 | *** join/#htc-linux pigeon (n=pigeon@218-214-60-232.people.net.au) |
14:33.38 | dcordes_ | cr2: got it? |
14:38.55 | cr2 | dcordes_: ok |
14:39.45 | cr2 | hm. there are some new things there. |
14:40.27 | cr2 | +CREG=1 |
14:40.29 | cr2 | still |
14:40.51 | cr2 | no. only at init |
14:40.57 | cr2 | AT+CREG=2\r |
14:41.55 | dcordes_ | the \r causes the modem to respond on the command |
14:44.57 | dcordes_ | cr2: how do we enable gps? |
14:45.51 | cr2 | hehe. the same with 'bash' ;) |
14:46.58 | dcordes_ | hm? |
14:47.04 | cr2 | \r |
14:47.44 | cr2 | yes, as i've said |
14:47.46 | cr2 | AT+HTCAGPS=5 |
14:48.18 | dcordes_ | aaah gotcha. so it is the at send buffer which enables gps? |
14:48.35 | cr2 | there are some weird commands, but the rest is ok. |
14:48.42 | cr2 | i think so. |
14:48.53 | dcordes_ | ok that sounds reasonable |
14:48.53 | cr2 | if AT cmd will work, we will check it |
14:49.15 | dcordes_ | maybe marbalon will come up with an idea |
14:50.14 | dcordes_ | I looked how to create new GPS recv fifo but have no idea how to include it. I mean the syntax is clear: recv.buffer recv.start recv.size |
14:50.31 | dcordes_ | but there are only two now and they are seleceted with if bla=0 then SMD1 else AT |
14:50.41 | dcordes_ | I don't know how to put the GPS there |
14:50.44 | dcordes_ | can you look? |
14:52.25 | cr2 | these are just some additional (pseudo-)tty nodes, like the at cmd |
14:53.04 | dcordes_ | I assumed that which is why I tried to make a new one for GPS |
14:53.09 | dcordes_ | recv |
14:53.15 | cr2 | i don't know if one can send gps commands. |
14:53.40 | cr2 | but you can just ignore writes to gps |
14:54.00 | cr2 | we need to understand the other ones. |
14:54.14 | cr2 | what was it ? 3 and 9 ? |
14:54.22 | dcordes_ | ** } else { |
14:54.22 | dcordes_ | ** ch->recv.buffer=(struct smd_buffer *)(MSM_SHARED_RAM_BASE+); |
14:54.22 | dcordes_ | ** ch->recv.start=(char *)(MSM_SHARED_RAM_BASE+0x0545c0); |
14:54.22 | dcordes_ | ** ch->recv.size=0x2000; |
14:54.23 | dcordes_ | **} |
14:54.27 | dcordes_ | for gps I inserted this |
14:54.30 | cr2 | 0 1 2 3 7 9 |
14:54.42 | dcordes_ | no clue. do you have one smem dump? |
14:55.22 | cr2 | it seems that you have 3 addresses prepended to the buf. |
14:55.39 | cr2 | if you'll trust wiki |
14:57.08 | cr2 | dcordes_: btw, does the atcmd actually work for you ? |
14:57.33 | cr2 | dcordes_: i.e. can you connect with cu, send at commands and get replies ? |
14:58.04 | dcordes_ | nooo :D only receive |
14:58.20 | cr2 | hm. strange |
14:58.24 | dcordes_ | that is what I tried to solve above and asked the question concerning what to put as at send.buffer |
14:58.28 | *** join/#htc-linux TimRiker (n=timr@70-7-206-68.area7.spcsdns.net) |
14:58.35 | cr2 | the wiki looks quite symmetric |
14:58.37 | dcordes_ | that is my priority |
14:58.42 | dcordes_ | getting the AT send work |
14:59.16 | cr2 | gps rx buf is at +0x545c8 |
15:00.22 | cr2 | 9 may be a video call |
15:00.53 | cr2 | need to cross-check the channel numbering with hermes and athena |
15:03.38 | dcordes_ | cr2: video and arm9? huh |
15:07.42 | dcordes_ | ah video calling got it |
15:07.45 | dcordes_ | :) |
15:44.41 | *** join/#htc-linux MHazem (n=GoD@196.205.193.11) |
15:59.30 | *** join/#htc-linux noelcragg (n=noel@fw.macrovision.com) |
16:00.11 | *** part/#htc-linux noelcragg (n=noel@fw.macrovision.com) |
16:07.46 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) [NETSPLIT VICTIM] |
16:18.14 | dcordes_ | cr2: can you tell me what is android pmem? |
16:23.47 | *** join/#htc-linux goxboxliv1 (n=goxboxli@195.159.97.196) |
16:45.22 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) [NETSPLIT VICTIM] |
16:45.22 | *** join/#htc-linux bjorn` (i=bjorn@archlinux.no) [NETSPLIT VICTIM] |
16:45.22 | *** join/#htc-linux par (i=par@dipole.idlepattern.com) |
16:45.22 | *** join/#htc-linux Primax^ (n=primax@90-224-25-66-no112.tbcn.telia.com) [NETSPLIT VICTIM] |
17:01.36 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) [NETSPLIT VICTIM] |
17:01.36 | *** join/#htc-linux bjorn` (i=bjorn@archlinux.no) [NETSPLIT VICTIM] |
17:01.36 | *** join/#htc-linux par (i=par@dipole.idlepattern.com) |
17:01.36 | *** join/#htc-linux Primax^ (n=primax@90-224-25-66-no112.tbcn.telia.com) [NETSPLIT VICTIM] |
17:14.16 | *** join/#htc-linux bjorn` (i=bjorn@archlinux.no) |
17:41.48 | *** join/#htc-linux hlbot179 (n=adm@82.67.76.179) |
18:05.19 | *** join/#htc-linux noelcragg (n=noel@burkemost.svl.macrovision.com) |
18:05.27 | *** part/#htc-linux noelcragg (n=noel@burkemost.svl.macrovision.com) |
18:31.30 | *** join/#htc-linux noelcragg (n=noel@burkemost.svl.macrovision.com) |
18:31.36 | *** part/#htc-linux noelcragg (n=noel@burkemost.svl.macrovision.com) |
18:39.16 | *** join/#htc-linux snakefreak (n=snake@dyndsl-091-096-104-169.ewe-ip-backbone.de) |
18:39.21 | snakefreak | hi all |
18:44.05 | goxboxliv1 | hi |
18:44.15 | *** join/#htc-linux cr2 (n=konversa@crpl6.physik.uni-wuppertal.de) |
18:45.03 | cr2 | suse 10.3 is fscking piece of shit |
18:45.13 | snakefreak | yes |
18:45.15 | snakefreak | ^^ |
18:45.18 | snakefreak | |
18:45.18 | snakefreak | can anyone tell me what the best running universal image? which has the largest scope? which is mostly bug free |
18:45.31 | cr2 | the x server leaks memory and eventually segfaults. |
18:45.55 | cr2 | starting OOo forces the x server segfault too. |
18:46.00 | _who | cr2: what kind of graphic card do you have? |
18:46.33 | cr2 | 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] |
18:46.47 | cr2 | 10.1 was ok. |
18:47.12 | _who | ok |
18:47.55 | cr2 | i don't use hw 3d and other weird stuff |
18:50.17 | cr2 | can't 10.1 because the amount of security vulnerabilities probably matches microsoft's. |
18:50.34 | cr2 | too lazy to switch to debian |
18:50.58 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
18:51.30 | cr2 | snakefreak: i think qtopia was the latest and the greatest on the universal. |
18:51.45 | snakefreak | goxbox is that http://www.linuxtogo.org/~htcpxa/htcuniversal/images/OpenMoko/Openmoko-Linux.cab yours? it end with error instalation faults |
18:51.58 | snakefreak | cr2 thx i will try it^^ |
18:52.10 | pikapika | hi |
18:52.23 | snakefreak | hi |
18:58.46 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf9552.pool.einsundeins.de) |
19:09.57 | snakefreak | cr2 do you have a link to a qtopia image i only found the on on linuxtogo.~htcpxa but build date 20-Jan-2008 looks old^^ |
19:11.28 | cr2 | snakefreak: it's not old. they wait for 4.4 release |
19:11.58 | snakefreak | ah ok |
19:19.05 | *** join/#htc-linux patoche (n=Patrice@lns-bzn-27-82-248-16-253.adsl.proxad.net) |
19:26.12 | lama | cr2: I have opensuse 10.3 one one remote server, far away, without support locally |
19:26.31 | lama | there is no hardware console for it too |
19:26.59 | lama | so changing OS might not be so easy - but I must get rid of it :P |
19:27.31 | lama | what do you think about toshiba g900? |
19:29.37 | *** join/#htc-linux crackerbox (n=pocketir@197.sub-75-206-103.myvzw.com) |
19:29.57 | cr2 | lama: it runs wince ? |
19:30.04 | crackerbox | hey guys |
19:30.14 | cr2 | hi crackerbox |
19:30.42 | crackerbox | irc on my htc... now im cool |
19:30.47 | lama | cr2: yes, pxa270 |
19:31.29 | cr2 | lama: do you have it ? |
19:31.33 | lama | but official rom even with latest fixes is damn slow compared to newest HTC WIZARD roms |
19:31.40 | lama | cr2: yes |
19:31.57 | cr2 | lama: can you run haret and post the log ? |
19:32.02 | lama | I've found a note about one guy trying to port linux on it, but doesn't look promising |
19:32.14 | lama | cr2: I can, later, |
19:32.25 | cr2 | pxa270 itself should be easy. |
19:32.37 | cr2 | you need to know what other hardware do you have there. |
19:32.53 | cr2 | pxa270 is a paradise compared to msm7x00 ;) |
19:32.54 | lama | I know I need, but I am not going to open it |
19:33.05 | lama | it's shiny new device with warranty |
19:33.12 | cr2 | you don't need to open it. |
19:33.16 | lama | seen fcc photos |
19:33.29 | lama | but they aren't very detailed |
19:33.56 | lama | is it allowed to speak about non htc phones? :P |
19:34.00 | cr2 | you need either the rom/spl or to run testwm5 (last resort, but can be very helpful for tracing) |
19:34.28 | lama | dumped roms are on myg900.com |
19:34.40 | cr2 | it's the only place where you can get reasonable info for killing wince on an arm cpu anyway. |
19:35.28 | cr2 | do you have a link to the linux port ? |
19:35.43 | lama | it is just one post on myg900.com forum |
19:35.57 | lama | someone have stated he is working but doesn't have time :P |
19:36.12 | cr2 | hehe. looks like hermes on the outside |
19:36.42 | lama | it is bigger, longer at least, I have wizard to compare |
19:37.15 | cr2 | goforce? |
19:37.20 | lama | yes |
19:37.21 | lama | :P |
19:37.33 | lama | even nvidia says it has goforce |
19:37.44 | lama | and that is all fun from it haha |
19:37.45 | cr2 | fingerprint reader ? |
19:37.52 | cr2 | is it vga ? |
19:37.56 | lama | wvga |
19:37.59 | lama | 800x480 |
19:38.04 | cr2 | nice. |
19:38.12 | lama | not with this rom :P |
19:38.58 | lama | but yes hardware is nice, LCD isn't transflective but with highest settings I was able to use it for basic things outside under strong sun |
19:39.06 | snakefreak | wtf 800x480 its very nice ^^ |
19:39.26 | cr2 | hm |
19:39.28 | cr2 | pmemdump 0x8007F000 0x180000 IPL.BIN |
19:39.32 | lama | oh and two small details |
19:39.39 | lama | it has ESC and CTRL keys |
19:39.43 | lama | great for ssh |
19:39.47 | snakefreak | xd |
19:39.48 | snakefreak | ^^ |
19:41.06 | lama | should I use haret 0.5.1 |
19:41.15 | cr2 | yes |
19:41.20 | cr2 | at first. |
19:41.43 | cr2 | then you'd check the gnuharet version at jornada820 to make 'dump pxa27x' |
19:41.57 | lama | heh |
19:41.58 | cr2 | i can't find time to port it over to mainline. |
19:42.21 | lama | is typing form jornada 720 now |
19:42.22 | lama | :P |
19:43.18 | cr2 | hehe. can't find time to make 820 work properly with 2.6 too ;) |
19:46.56 | lama | I could live with wm 6.0 - all I need is faster j2me emulator, for opera mini, one from toshiba rom is so slow compared to any qvga j2me on wizard |
19:49.49 | *** join/#htc-linux ASUS-tek (n=microsta@221.128.206.149) |
19:50.05 | ASUS-tek | cheers |
19:50.26 | *** part/#htc-linux ASUS-tek (n=microsta@221.128.206.149) |
19:51.18 | cr2 | hm. they use mdoc |
19:53.00 | cr2 | TechFaith Wireless. is it a gsm modem ? |
19:53.37 | lama | <PROTECTED> |
19:54.20 | lama | I am not sure why but can't loging on haret 0.5.1 over wireless |
19:54.57 | lama | ah |
19:55.04 | lama | port :P |
19:55.54 | cr2 | 9999 |
19:56.13 | lama | yeah :P I am usugn putty |
19:56.18 | lama | using |
19:56.24 | cr2 | you need to login only for extended dumping. |
19:56.55 | cr2 | the haretlog.txt can be created just by starting haret with the empty 'earlyharetlog.txt' file in the same directory as haret |
19:57.32 | lama | ok will try that first |
20:02.52 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/haretlog.txt |
20:04.38 | cr2 | ok. looks good. |
20:05.03 | cr2 | now you can change the default.txt file |
20:05.23 | cr2 | take it from some other device, and press "Run" |
20:05.45 | cr2 | you'll get more data trying to boot the kernel. |
20:06.12 | lama | can you give me link for kernel and defaults (universal?) |
20:09.42 | cr2 | try to take this one |
20:09.44 | cr2 | http://linuxtogo.org/~htcpxa/htcblueangel/GPEphone/ |
20:10.58 | lama | is this startup.txt fine for logging ? |
20:11.24 | cr2 | yes. |
20:11.32 | cr2 | it will hang anyway |
20:11.41 | cr2 | because the mtype does not match. |
20:11.50 | cr2 | but you'll get more data in the log |
20:12.19 | *** join/#htc-linux BabelO_ (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
20:12.50 | lama | no it doesn't hang even :> |
20:12.59 | lama | Error "undefined MTYPE" |
20:13.09 | lama | wince works fine |
20:13.32 | cr2 | ok |
20:13.48 | cr2 | add some fake mtype to default.txt |
20:13.55 | cr2 | set mtype 1000 |
20:14.12 | lama | can I add it to startup.txt ? |
20:15.08 | cr2 | yes. |
20:15.16 | cr2 | set it as the first line |
20:18.39 | lama | Jumping to Kernel and thats all folks on the screen |
20:18.56 | cr2 | ok |
20:19.03 | cr2 | check the haretlog.txt |
20:19.04 | lama | oh and chars are so small :> |
20:19.45 | lama | one thing that sux is the hardware reset button under back cover, I have to open phone now :-/ and it's quite hard to do that |
20:20.15 | cr2 | ok |
20:21.13 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/haretlog_linux_boot.txt |
20:22.00 | cr2 | hm. very interesting :) |
20:23.26 | cr2 | Video Phys FB=0a000020 Fonts=b08ca064 |
20:23.41 | cr2 | so the fbram is mapped at 0x0a000000 |
20:23.45 | lama | btw what is the status and how hard is it to make radio usable under linux? |
20:24.54 | cr2 | MMU setup: mmu=A0700000/a0700000 |
20:26.32 | cr2 | preload=2264@51C76000/b08c9000 sj=51C76000 stack=51C74000/b1795000 |
20:26.52 | cr2 | hmm. why is the mapping always at 0xb. |
20:27.42 | cr2 | lama: you need to find out how it is connected. |
20:27.54 | lama | what connected? |
20:27.59 | cr2 | btw, can you telnet over wifi to haret ? |
20:28.01 | cr2 | the radio. |
20:28.08 | lama | ah |
20:28.23 | lama | so linux is using same radio rom as wince? |
20:28.52 | cr2 | yes |
20:29.07 | lama | cr2: I can try it should work, been using haret in past with jornada |
20:29.21 | cr2 | ok. |
20:29.44 | lama | cr2: and what phones are stable enough for daily usage |
20:29.52 | lama | universal, blueangel? |
20:30.07 | cr2 | lama: universal/magician. |
20:30.29 | cr2 | universal is probably the best |
20:32.28 | cr2 | if g900 uses pxa mci for SD we will be able to run it as a pda with some minor effort. |
20:32.51 | lama | would be cool but I am not skilled in this area:> |
20:33.07 | cr2 | but then we need to find out which touchscreen chipset is used, how it's connected and so on. |
20:33.11 | lama | long time ago been digging 8086 asm in dos times - real mode |
20:33.27 | cr2 | do you know where i can get a rom ? |
20:33.46 | lama | yes |
20:34.08 | lama | funny thing is that toshiba never released anything |
20:34.23 | cr2 | it's not unusual |
20:34.29 | lama | and phone was really buggy for the first months |
20:34.47 | cr2 | is it gsm ? |
20:34.53 | lama | http://myg900.com/index.php?showtopic=615 |
20:35.15 | cr2 | hm. umts |
20:35.19 | lama | <PROTECTED> |
20:35.19 | lama | 3G Network HSDPA 850 / 1900 / 2100 |
20:35.24 | cr2 | ok |
20:35.52 | cr2 | that looks good. |
20:35.58 | lama | you might find one for nice price - ppl are returing it :> |
20:36.38 | cr2 | lol |
20:36.41 | cr2 | why ? |
20:36.55 | lama | http://myg900.com/index.php?showtopic=624 you can use this link too (with passwords) if you don;t like rapishare |
20:37.23 | lama | cr2: it wasn't stable |
20:37.25 | cr2 | rapishare works ok |
20:37.34 | cr2 | the hardware or wince ? |
20:37.38 | lama | wince |
20:37.46 | univac | ;] |
20:37.49 | cr2 | lol |
20:38.30 | lama | 3g has weak reception too - one, two bars only |
20:39.04 | cr2 | i don't care. |
20:39.10 | cr2 | the lcd looks nice. |
20:39.13 | cr2 | no gps ? |
20:39.16 | lama | no |
20:39.48 | lama | host usb! |
20:40.20 | cr2 | n560 has it too. |
20:40.32 | lama | but only up to 100mA and not so usable under wince |
20:40.37 | cr2 | but without phone. and with lame gps. |
20:40.42 | cr2 | ok. |
20:41.11 | cr2 | are there any tools for splitting the .xld ? |
20:41.35 | cr2 | looks like some crypted thing to me. |
20:41.58 | lama | "xored" ? :P |
20:42.18 | cr2 | yes. |
20:42.38 | lama | there is something on xda for it iirc |
20:42.49 | lama | don't remember name |
20:43.20 | lama | http://myg900.com/index.php?showtopic=747 check this |
20:43.42 | tcccp | Are there any precompiled kernels for pxa270s? I have the feeling I'm doing something terribly wrong configuring/compiling |
20:44.34 | lama | cr2: ok, I'm in haret over wifi |
20:45.41 | *** join/#htc-linux goxboxliv2 (n=goxboxli@208.84-48-176.nextgentel.com) |
20:46.21 | cr2 | lama: do you use python haretconsole, of just telnet ? |
20:46.45 | lama | cr2: I see you are from .de in poland I could get it new with warranty (and newest stuff in ROMs, pl version) for about 270E |
20:46.48 | lama | cr2: telnet |
20:46.54 | cr2 | try 'ps' and 'lsmod' first |
20:47.06 | cr2 | hm. not bad. |
20:47.20 | cr2 | but i have so many gadgets already :) |
20:50.43 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/ done |
20:53.20 | cr2 | ok. |
20:53.26 | cr2 | nvddi.dll and nvcam.dll |
20:53.41 | cr2 | so the cam is connected to th nvidia port. |
20:54.12 | tcccp | hmmm |
20:54.14 | cr2 | gpio.dll that's something new. |
20:54.23 | *** join/#htc-linux LunohoD_ (n=alex@e180068080.adsl.alicedsl.de) |
20:54.33 | lama | I don't care about camera, it has so buggu software that one can not disable shutter sound even without registry hack:> |
20:54.40 | cr2 | can you try 'dump gpio' ? unfortunately it's limited to lower gpios. |
20:54.49 | cr2 | ok. |
20:54.53 | cr2 | and 'dump mmu' |
20:55.04 | cr2 | but this one will produce a lot of output. |
20:55.46 | lama | wouldn't it be better to that after hard reset |
20:55.56 | cr2 | why ? |
20:56.08 | lama | ok |
20:56.18 | cr2 | haret is rather harmless these days. |
20:56.33 | cr2 | i can't rememebr when it crashed the machine last time. |
20:56.47 | cr2 | unless you don't do strange things, of course :) |
20:59.27 | tcccp | cr2: My machine crashes w/o booting |
20:59.29 | tcccp | ;) |
20:59.53 | snakefreak | cr2 is in qtopia no console aviable? |
21:00.53 | cr2 | snakefreak: i think there was a version with qtconsole |
21:01.06 | cr2 | tcccp: on sable ? with the latest hh.org CVS ? |
21:01.12 | tcccp | cr2: Aye |
21:01.20 | cr2 | tcccp: how do you boot it ? |
21:01.23 | tcccp | cr2: HH, vanilla, ${somewhere_leeched} |
21:01.31 | tcccp | cr2: with gnuHaRET |
21:01.37 | cr2 | tcccp: haret or linload ? |
21:01.57 | tcccp | haret |
21:01.57 | cr2 | which haret version ? gnuharet is an old hack these days. |
21:02.05 | tcccp | some 2007 version |
21:02.13 | cr2 | to use it you need to really know why are you using it and what for. |
21:02.24 | cr2 | get the latest haret-0.5.1 |
21:02.26 | lama | cr2: done, same directory |
21:02.32 | cr2 | lama: thanks. |
21:02.35 | tcccp | argh |
21:03.31 | tcccp | cr2: And I thought haret was the old stuff and gnuharet the newer one... %) |
21:04.32 | cr2 | tcccp: haret-0.3* was the older stuff. |
21:04.47 | tcccp | ah, ok |
21:05.11 | cr2 | tcccp: gnuharet has some excellent 'dump pxa27x' support, and the 'dump asic3*' functions. |
21:05.28 | tcccp | anyway - I never got further than "Jumping to Kernel..." regardless which kernel I have used |
21:05.44 | cr2 | lama: 128MB ram ? |
21:05.53 | lama | yes |
21:06.12 | cr2 | tcccp: hm. maybe i'd try to compile an .exe autoloader for sable and check myself. |
21:06.13 | lama | but only 128mb of rom, so not much left with wm 6.0 |
21:06.35 | lama | at least it has some goodies in ROM like opera mobile 8.65 |
21:07.36 | cr2 | lama: the ram mapping is interesting. because it's so unusual. |
21:08.03 | lama | cr2: maybe it is affected by spb shell running :> |
21:08.39 | cr2 | no, it looks like split into two "partitions" |
21:08.54 | cr2 | 64MB at 0xa0000000 and 64MB at 0xb0000000 |
21:09.41 | cr2 | which is a very unusual setup for pxa device. |
21:10.07 | cr2 | such holes were used only on the sa11x0 devices. like jornada820 |
21:11.47 | tcccp | cr2: I'm trying something... |
21:11.59 | lama | from hardware point of view it lacks only transflective lcd, and gps |
21:12.16 | cr2 | a3f |
21:12.33 | lama | it could be killer device with righ OS/ROM/Drivers (goforce) but I doubt it will ever happen |
21:12.37 | cr2 | wifi ? |
21:13.01 | cr2 | the vsfb will work, if booted from wince. |
21:13.10 | cr2 | the suspend/resume may be a PITA |
21:13.28 | cr2 | yes, it looks like 64MB at 0xa0000000 and 64MB at 0xb0000000 setup. |
21:13.47 | cr2 | nvidia vram at 0x0a000000 |
21:13.58 | cr2 | pcmcia area is mapped. |
21:14.08 | cr2 | but it's always mapped. |
21:14.13 | cr2 | even if not used |
21:14.35 | cr2 | the 0x0 area must be the mdoc |
21:14.43 | cr2 | do you have g3 of g4 mdoc ? |
21:14.55 | cr2 | s/ of / or / |
21:15.44 | cr2 | there is something at 0x08400000 |
21:15.55 | cr2 | it's either nvidia something, or wifi |
21:16.41 | lama | don't know it |
21:17.16 | cr2 | lama: 'dump gpio' ? |
21:17.39 | cr2 | the mapping setup looks reasonable. |
21:18.20 | cr2 | lama: i'd like to know if the gnuharet will work on g900 |
21:18.40 | cr2 | http://jornada820.sourceforge.net/files/haret/ |
21:18.43 | lama | sure no problem |
21:19.13 | cr2 | if it uses pxamci, you have won :) |
21:19.25 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/gpio.txt |
21:20.44 | cr2 | lama: if gnuharet will run, it'll dump all 120gpio. including the (possible) pxamci gpios. |
21:21.18 | lama | gnuharet2007... ? |
21:21.22 | cr2 | yes |
21:21.40 | cr2 | run it, and telnet to 9999 as usual |
21:21.56 | cr2 | if it will work, run |
21:22.01 | cr2 | 'dump pxa27xgpio' |
21:22.05 | cr2 | and 'dump pxa27x' |
21:22.46 | cr2 | i'll compare your short gpio dump list wit wiki data |
21:23.16 | lama | =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.05.16 23:22:58 =~=~=~=~=~=~=~=~=~=~=~= |
21:23.16 | lama | Welcome, this is GNU/HaRET running on WindowsCE v5.2 |
21:23.16 | lama | PLATFORMTYPE: PocketPC |
21:23.16 | lama | OEMINFO: TOSHIBA |
21:23.17 | lama | Minimal virtual address: 00010000, maximal virtual address: 7fffffff |
21:23.27 | cr2 | ok. |
21:23.28 | lama | I am disconnected after that |
21:23.40 | cr2 | hmm. that's bad ;) |
21:24.09 | cr2 | can you add the commands to default.txt and execute it ? |
21:24.20 | cr2 | 'dump pxa27x dump1' |
21:24.22 | lama | sure |
21:24.23 | cr2 | and |
21:24.30 | cr2 | 'dump pxa27xgpio dump2' |
21:25.31 | cr2 | we may get the usb host settings from it, so if it's used then you can boot off the usb stick. |
21:27.38 | lama | doesn't work |
21:27.44 | lama | it creates dump1 file |
21:27.59 | lama | and that is all, nothing is written to it |
21:28.08 | cr2 | hmm. |
21:29.01 | cr2 | strange |
21:29.23 | cr2 | what about 'dump gpio gpio1' ? |
21:34.30 | lama | same |
21:34.53 | cr2 | ok. |
21:35.28 | cr2 | the udc is used, so you'd be able to ssh to the device over usb, if linux is booted. |
21:35.47 | cr2 | don't see the pxamci |
21:36.09 | cr2 | if some nvidia sd is used, then it'll be pita ;-) |
21:36.37 | lama | sure :> |
21:38.51 | cr2 | if you are not lazy, you can port the gnuharet 'dump pxa27x' to haret-0.5.1 |
21:39.15 | cr2 | btw. can you run testwm5 ? |
21:39.16 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
21:43.24 | cr2 | #define MMC_CMD __REG(0x41100030) /* Index of current command */ |
21:43.24 | cr2 | #define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */ |
21:43.25 | cr2 | #define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */ |
21:44.20 | cr2 | looks good. |
21:44.45 | cr2 | #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ |
21:45.19 | cr2 | 0x37 |
21:45.32 | cr2 | =55 |
21:45.38 | cr2 | ok. |
21:47.00 | cr2 | 4110 |
21:47.10 | cr2 | lama: you have won :) |
21:47.44 | lama | :> |
21:48.05 | cr2 | you only need to trace the sd power gpio |
21:48.17 | cr2 | and hope that there is no strange cpld or such. |
21:49.05 | cr2 | well, there was some old haret that dumped 120gpios |
21:50.06 | cr2 | lama: can you test this one ? |
21:50.09 | cr2 | http://sdgsystems.com/pub/ipaq/hx4700/starterkit/20050611/ |
21:50.20 | lama | cr2: first i will end with testwm5 |
21:50.29 | cr2 | the haret. |
21:50.31 | cr2 | ok. |
21:50.43 | cr2 | i'm interested only in the 'dump gpio' from this haret. |
21:50.55 | cr2 | the pxamci is used. that's good. |
21:51.16 | cr2 | well. so the sd will be supported. |
21:51.33 | cr2 | and the framebuffer with the vsfb. |
21:51.38 | cr2 | hehe. |
21:51.46 | cr2 | you may even boot android ;) |
21:52.13 | cr2 | the touchscreen. will be very helpful. to find out the chip. |
21:56.11 | lama | testwm5 takes some time |
21:56.42 | lama | anyone know what gfx chip is in htc diamond? |
21:56.59 | cr2 | 32 is O2, it's mmclk. good. |
21:57.10 | cr2 | lama: 7201A |
21:57.25 | cr2 | must be a builtin. |
21:57.53 | cr2 | like it's in the obfuscated android-msm kernel |
22:01.23 | snakefreak | cr2 the opie image from ~htcpxa is runnig fine. its very stable. but i have things i found not good. the leds of phone keys call end call on the back of universal ar still on all the time. and i havend a console but i need^^ |
22:02.04 | cr2 | snakefreak: opie does not support the phone. |
22:02.32 | snakefreak | ? |
22:02.38 | cr2 | snakefreak: the led control may need some minor hacks. |
22:02.44 | snakefreak | ah |
22:03.22 | snakefreak | ok^^ but many other thinks are working fine. i think better ober it than gpe on blueangel.^^ |
22:03.41 | snakefreak | about |
22:03.49 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
22:04.47 | lama | testwm5 takes ages :> |
22:06.09 | cr2 | yes |
22:06.47 | cr2 | snakefreak: it's only about which apps you want to run. |
22:10.08 | cr2 | lama: sdhc_mainstoneii.dll |
22:10.25 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/gpio1.txt |
22:10.28 | cr2 | lama: so it was clear that pxamci is used for :) |
22:10.45 | cr2 | ok, that looks good. |
22:14.19 | lama | funny thing they call it sdhc :P it doesn't support sdhc in official rom |
22:14.34 | cr2 | sd host controller |
22:14.46 | snakefreak | cr2 i need to run kismet and need bluettoth /gps and phone/sms listen mp3 will be nice. i had all runing on blueangel only sending sms was buggy. and it the handling was very hard ( because touch) |
22:14.55 | cr2 | pxamci supports "sdhc" |
22:15.01 | lama | cr2: ah :> |
22:15.19 | cr2 | lama: it's only about the blocksize |
22:15.51 | lama | cr2: drivers are the problem - afaik sdhc was added in later builds of wm 6.0, tosh has old buggy early build + patches on that build (?) |
22:16.07 | cr2 | snakefreak: the gui for these may be not easy, but it should work. |
22:16.36 | cr2 | lama: sdhc support in arm-linux was a 2line patch ;) |
22:17.06 | cr2 | lama: are there buttons/keyboard ? |
22:17.12 | lama | cr2: sdhc support for wm devices is buy newer device :P |
22:17.24 | cr2 | i think you'd easily identify them with haret. |
22:17.41 | lama | cr2: yes it has nice keyboard, even with ctrl and esc keys |
22:18.17 | cr2 | lama: ok. then we just need to decode the alt gpio states. |
22:18.39 | cr2 | i guess it's pxa matrix keyboard. |
22:19.11 | cr2 | i think you'll find the UDC puen and the SD power easily with haret. |
22:19.48 | cr2 | well, what is really needed now is to find which touchscreen chip is used, and how it's connected. |
22:20.03 | cr2 | you have the testwm5 finished ? |
22:20.38 | lama | will you help me later with using this inforation in kernel sources? :P |
22:20.48 | lama | cr2: no, only ~10mb so far |
22:21.08 | cr2 | lama: kernel sources should be relatively easy |
22:21.31 | lama | not for me :> |
22:21.42 | cr2 | lama: register the mtype at armlinux. we will obviously be able to support this device. |
22:22.00 | cr2 | lama: at least the basic things. |
22:23.19 | lama | I think I will stop wm5test and leave it later for night |
22:23.54 | lama | or maybe it is over now, don't know it, can't bring it into front running |
22:24.09 | lama | ah no, it's running |
22:24.15 | lama | folder is growing slowly |
22:25.17 | lama | anyway it will be ages to finish it now, so I will leave that for night and upload compressed files to same folder as above |
22:27.03 | cr2 | ok. |
22:28.10 | lama | so what now WGPIO and pressing of keys? |
22:28.31 | cr2 | yes. |
22:29.07 | cr2 | and inserting/removing the SD card |
22:29.17 | cr2 | and inserting/removing the USB cable |
22:31.09 | snakefreak | cr2 do you know other images for universal i only found the images on ~htcpxa @ linuxtogo |
22:31.32 | cr2 | snakefreak: i don't think there are any better images |
22:31.55 | snakefreak | ^^ |
22:32.41 | snakefreak | hm i thik i have to learn about qtopia and have to make my own |
22:33.00 | snakefreak | with console^^ |
22:33.56 | cr2 | lama: mainstoneii_wavedev.dll |
22:33.56 | cr2 | lama: looks like the pxa i2s/ac97 is used. |
22:34.03 | cr2 | snakefreak: good idea. we also have 2 gps programs for it. |
22:34.38 | cr2 | lama: rilhsdpa.dll |
22:34.51 | cr2 | lama: it's interesting to run 'strings' on it |
22:36.53 | lama | hmm, how many GPLR changes per seconds are normal without any input? |
22:38.14 | cr2 | on which one ? |
22:38.41 | cr2 | it may be the LCD pwm as an alt function, that will spam without an end ;) |
22:39.14 | cr2 | thne just mask it. |
22:40.20 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/wgpio1.txt that is one second without any input |
22:41.08 | cr2 | lama: lol. found the unxor with c++ source. |
22:41.27 | lama | cr2: I've pasted it :> |
22:41.45 | cr2 | 28,17,31 are spamming. |
22:41.46 | lama | looks you don't click and read my links :P |
22:42.30 | lama | cr2: yes, but isn't it something unnormal with such amount of spam? iirc I was using WGPIO on jornada and there wasn't any spam |
22:42.40 | lama | or it's was really limited |
22:43.39 | lama | http://myg900.com/index.php?showtopic=747 5th post from top :> |
22:44.36 | lama | 22:43 < lama> http://myg900.com/index.php?showtopic=747 check this |
22:44.38 | lama | :P |
22:45.03 | cr2 | lama: ok, but i've found the original c++ source |
22:45.13 | lama | my fault I haven't said what it is and it is 3 pages long |
22:45.41 | cr2 | ok. |
22:45.50 | lama | anyway xor shouldn't be compilicated 3 lines program in asm :> |
22:47.57 | cr2 | 16*8 |
22:48.20 | cr2 | 128bit key ;) |
22:51.42 | cr2 | ok. |
22:51.46 | cr2 | the ts is on i2c |
22:51.57 | cr2 | you'll be able to trace it with haret. |
22:52.00 | lama | I think wgpio is a waste of time for now |
22:52.12 | lama | as long as there is no "penguin" on the screen :> |
22:52.53 | cr2 | lol |
22:52.56 | cr2 | tcp.mws.mobile.live.com |
22:53.08 | cr2 | mask these 3 gpios |
22:53.20 | cr2 | ibit gpios 17 28 31 |
22:53.25 | cr2 | and the run wgpio again |
22:54.34 | lama | tcp.mws.mobile.live.com ? |
22:55.51 | cr2 | hm. use ffuart for ril. |
22:55.58 | cr2 | you may trace the ffuart too. |
22:57.00 | cr2 | "MemBase"=dword:40600000 ; UDC_BASE_U_VIRTUAL |
22:57.04 | cr2 | evildoers |
22:57.11 | cr2 | it's the physical address |
22:57.47 | lama | hmm ibit gpios doesn't mask it |
22:58.18 | cr2 | you trace with 'wirq' ? |
22:58.27 | cr2 | no. |
22:58.28 | lama | no :> |
22:58.46 | cr2 | strange |
22:58.57 | cr2 | CardDetectIRQ"=dword:40 ;IRQ_GPIO0_MMCCD |
22:59.22 | cr2 | not so interesting yet. |
22:59.41 | lama | I am WGPIO |
22:59.44 | lama | using |
23:00.33 | lama | HaRET(6)# ibit gpios 17 28 31 |
23:00.33 | lama | HaRET(7)# wgpio 1 |
23:00.33 | lama | GPLR[28] changed to 0 |
23:00.33 | lama | GPLR[18] changed to 0 |
23:00.44 | lama | spam spam spam.... |
23:01.06 | cr2 | strange |
23:01.17 | cr2 | btuart is used for bt. |
23:01.26 | cr2 | ffuart for the phone. |
23:01.37 | cr2 | is there IR ? |
23:01.54 | lama | I wonder if it is related to fix for SOD :> |
23:02.08 | lama | no there is no irda |
23:02.48 | lama | http://myg900.com/index.php?showtopic=579 here is explained SOD, it is said to be fixed in this rom 3.07 (newest) |
23:03.32 | cr2 | CheetahGSP1 is wifi ? |
23:03.48 | cr2 | and no serial ? |
23:03.53 | lama | seen somewhere it doesn't go to full sleep with (at least with old firmwares) |
23:03.55 | cr2 | then stuart will be unused. |
23:04.16 | lama | don't know answers :> |
23:04.48 | lama | ok, wifi is cheetach |
23:05.30 | lama | serial in what sense, on board? |
23:06.46 | cr2 | no, the rs232 cable |
23:07.41 | lama | are there wince phones with rs232 outside? |
23:08.34 | cr2 | SyChip Cheetah 802.11 SDIO Card |
23:08.42 | cr2 | yes, hima/blueangel |
23:08.45 | cr2 | for example |
23:08.51 | lama | old ones |
23:08.55 | cr2 | yes |
23:08.56 | lama | wm2003 |
23:09.03 | cr2 | yes |
23:10.22 | cr2 | lama: http://lists.infradead.org/pipermail/libertas-dev/2007-February/000239.html ? |
23:10.41 | cr2 | "SyChip", "Cheetah WLAN Module", "WLAN6061", "01" |
23:10.49 | lama | is cheetach supported by linux? |
23:10.51 | cr2 | i think libertas is supported on linux |
23:11.17 | cr2 | but you can check |
23:11.52 | cr2 | WL8100 |
23:11.53 | cr2 | WL6100 |
23:11.53 | cr2 | WL6064 |
23:11.53 | cr2 | WL6061 |
23:12.46 | cr2 | http://wiki.laptop.org/go/Libertas |
23:13.32 | lama | cool, but even with all those informations collected I do not know how to prepare and boot linux kernel :> |
23:14.04 | cr2 | this one comes later. |
23:14.15 | cr2 | the first thing to do is to register the mtype |
23:15.13 | cr2 | need to look for BT |
23:16.47 | snakefreak | gpephone.linux.rootfs.tar.bz2 is bootable from Qtopia-htcuniversal.exe if rennamed to qtopia.linux.rootfs.tar.bz2 nice nice^^ |
23:18.07 | cr2 | BTHCSR.PSR |
23:18.11 | cr2 | CSR ? |
23:19.35 | lama | http://www.csr.com/home.php |
23:20.16 | cr2 | since it's on uart, it will work. |
23:20.25 | cr2 | you only need to track the power/reset |
23:21.29 | cr2 | lol |
23:21.32 | cr2 | Disable the UART DMA to resolve the bug that bluetooth can't receive the big file |
23:21.50 | lama | huh? |
23:22.05 | cr2 | "GFSDK_BASE"=dword:08000000 |
23:22.08 | cr2 | ooh |
23:22.18 | cr2 | the sound seems to be on nvidia chip |
23:23.00 | lama | what does it mean from linux source point of view? |
23:23.27 | lama | is lame |
23:23.29 | lama | :P |
23:25.05 | cr2 | it's bad ;) |
23:25.22 | cr2 | as in "difficult to support" |
23:25.30 | lama | heh :> |
23:25.48 | lama | well nvidia sounds better than broadcom :> |
23:26.12 | lama | I hope android will change a lot |
23:27.10 | lama | but there is high chance for binnary blobs for all devices :P |
23:30.01 | cr2 | i don't care |
23:31.06 | lama | about new devices or binnary drivers? |
23:31.23 | cr2 | binary drivers |
23:31.45 | lama | for long time support it would be better to have opensource ones |
23:31.47 | cr2 | WL6100SP.img |
23:33.41 | lama | should I run testwm5 now? |
23:35.05 | cr2 | no. |
23:38.16 | cr2 | you can trace the touchscreen |
23:38.34 | cr2 | try 'wi 2' |
23:42.56 | cr2 | maybe 0x54 |
23:43.05 | cr2 | for the sd power |
23:44.34 | *** join/#htc-linux Marex (n=Marex@85-132-216-250-eth3-gwfm10-user.802.cz) |
23:45.15 | lama | wi 2 and should I touch it or not? |
23:45.25 | lama | or two time one with touch and without? |
23:45.29 | cr2 | no, look if you'll be spammed first |
23:45.45 | Marex | cr2, hi, still dying here |
23:45.52 | lama | Handled 1391 irq, 4333 abort, 3840 prefetch, 0 lost, 0 errors |
23:46.01 | cr2 | ok, it's too late for today. |
23:46.04 | Marex | ok, bye again, another restart requered :E~ |
23:46.05 | cr2 | lama: no spam ? |
23:46.21 | lama | there is spam this is last line |
23:46.29 | lama | 000000: 001d1e12: mem IRQS(0) a9200000=04000000 (04000000) |
23:46.29 | lama | 000000: 001d1ffb: mem IRQS(0) a9200000=00800000 (00800000) |
23:46.29 | lama | Handled 1391 irq, 4333 abort, 3840 prefetch, 0 lost, 0 errors |
23:46.46 | Marex | lama, hi, what are you working on ? |
23:46.58 | lama | I am not |
23:47.01 | lama | cr2 is :> |
23:47.22 | cr2 | Marex: g900/x01t |
23:47.52 | cr2 | a pxa270 hsdpa phone with nv5500 chipset |
23:48.09 | Marex | ah, that should be easy and fun :) |
23:48.12 | cr2 | libertas wifi, csr BT on btuart |
23:48.18 | cr2 | hehe. |
23:48.23 | Marex | libertas wifi ... ok |
23:48.24 | lama | I'm new protocol for remote haret, haret over llama :P |
23:48.26 | Marex | that wont be fun |
23:48.32 | cr2 | i'm not going to touch the nv. ati rulez :) |
23:49.04 | Marex | nv5500 you mean goforce ? |
23:49.06 | Marex | wow :p |
23:49.18 | cr2 | yes |
23:49.34 | Marex | they put it even into phones ? they has to be brave ;D |
23:49.36 | cr2 | wifi will work |
23:49.48 | cr2 | but there is no gps there. |
23:49.57 | Marex | palmld has libertas 8305, tx has 8381, both doesnt work |
23:50.07 | cr2 | doesn't ? |
23:50.09 | cr2 | why |
23:50.10 | Marex | since there is no driver and no specs at all |
23:50.13 | cr2 | sdio ? |
23:50.17 | Marex | pcmcia |
23:50.27 | cr2 | olpc ? |
23:50.31 | Marex | and some gpio driven pins |
23:50.36 | lama | ok, I think ts responds |
23:50.39 | Marex | olpc has 8385 USB |
23:50.50 | Marex | I have even 8385 CF, but they are too different |
23:51.01 | cr2 | ok |
23:51.41 | cr2 | Marex: do wm9712 on n560 instead :) |
23:52.16 | Marex | linear algebra first |
23:52.28 | lama | http://estel.wpia.uw.edu.pl/~lama/g900/wi2.txt first wi 2 was without touching screen, second one with touching and moving pointer |
23:53.15 | lama | Marex: this goforce is uselss |
23:53.17 | lama | no drivers |
23:53.21 | lama | no use at all |
23:53.29 | lama | gfx is quite slow on it |
23:54.10 | cr2 | lama: you'd use haretconsole. otherwise it's a PITA |
23:54.48 | Marex | lama, s/s$/s yet/ |
23:54.52 | Marex | ;) |
23:55.04 | cr2 | now i understand why you can't mask the gpios. |
23:55.30 | cr2 | lama: so you need python on the host machine. |
23:55.50 | lama | ok |
23:56.01 | cr2 | ok. good night |
23:56.24 | lama | ok bye, tx for interest in my device :> |
23:57.20 | Marex | does kernel boot on it yet > |
23:57.21 | Marex | ? |
23:58.23 | lama | no |
23:59.02 | Marex | hmm ... why not ? |
23:59.05 | lama | it is pxa270 |
23:59.09 | Marex | and ? |
23:59.17 | Marex | pxa270 is perfectly supported |
23:59.22 | lama | and it wasn't answer for question why not :P |
23:59.53 | lama | I am not skilled to hack it:> |