| 00:00.08 | paulproteus | # |
| 00:00.08 | paulproteus | | net/netfilter/xt_MARK.mod.c:19: fatal error: error closing /tmp/ccRwTxzg.s: No space left on device |
| 00:01.02 | exco | sh... |
| 00:02.27 | exco | started out with like 10GB free yesterday... how fast that went away :-) |
| 00:06.35 | miknix | Kevin2, I'm modifying your driver to be attached as chip to the i2c bus |
| 00:08.27 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 00:14.49 | exco | paulproteus: that really wasn't too clever (shouldn't have happened)... btw monotone? |
| 00:14.55 | paulproteus | Working on it. |
| 00:26.10 | Kevin2 | miknix: Which one? the bb-keys one? It'd be really odd to have that attached to a real i2c bus. |
| 00:26.31 | miknix | Kevin2, why? |
| 00:27.37 | Kevin2 | It's not a real i2c chip. I'd be surprised if an i2c bus could handle it. |
| 00:27.50 | Kevin2 | Is the chip you found control backlight and front keypad? |
| 00:27.57 | miknix | Kevin2, yes |
| 00:28.20 | miknix | Kevin2, no matter what address I read, I always have the dpad press value |
| 00:28.23 | Kevin2 | Can you drive the pins in use via gpio instead of i2c? |
| 00:29.33 | miknix | Kevin2, how'd I do that? attaching this into the i2c bus only needed a simple pooling |
| 00:29.56 | Kevin2 | pooling? |
| 00:30.01 | Kevin2 | miknix: What is the device? |
| 00:30.07 | miknix | Kevin2, htc wizard |
| 00:30.21 | Kevin2 | That is omap, right? |
| 00:30.24 | miknix | Kevin2, yes |
| 00:30.34 | miknix | 850 |
| 00:30.50 | Kevin2 | And it is using the omap850 i2c logic block? |
| 00:30.57 | miknix | yes |
| 00:31.04 | Kevin2 | Does it use it under wince? |
| 00:31.10 | miknix | dont know |
| 00:31.21 | miknix | err.. yes |
| 00:31.24 | miknix | it uses it |
| 00:31.42 | Kevin2 | Most of these SoC type things allow you to use the pins as either gpio or one of the logic blocks. |
| 00:32.11 | Kevin2 | It usually comes up as a gpio "alternate function". So, for example, one can say pin 28 is either a gpio or the clock of i2c. |
| 00:32.25 | miknix | Kevin2, oh.. the mux you say |
| 00:32.47 | Kevin2 | Yeah - something like that. If you can turn the 2 pins back to gpio, you may be able to use the driver directly. |
| 00:33.01 | miknix | Kevin2, didnt know that |
| 00:33.25 | miknix | Kevin2, but I still need to attach to the i2c bus |
| 00:33.40 | miknix | to export something into sysfs to control backlight and leds |
| 00:35.13 | BabelO | good night |
| 00:36.13 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 00:37.08 | Kevin2 | miknix: I'm not sure why using i2c would help with that. Take a look at what I've done with apache and hermes. |
| 00:37.48 | miknix | Kevin2, I know which addresses to read for enabled leds, dimming backlight intensity, etc. |
| 00:38.10 | paulproteus | exco, re: monotone: It'll take some time, I have to upgrade a bunch of other stuff first (I'm trying to keep my server mostly on Debian stable). |
| 00:39.28 | miknix | Kevin2, I dont see backlight control in this driver.. do you have more separately= |
| 00:39.29 | miknix | ? |
| 00:39.35 | exco | paulproteus: sorry, I didn't want to cause any trouble |
| 00:40.43 | paulproteus | exco, It's okay, I want to do my builds on rose also. (-: |
| 00:41.00 | Kevin2 | miknix: The bbkeys driver just provides gpio and lcd functions. One needs to map gpios to lcd and backlight controls. See the htcapache.c and htchermes.c files. |
| 00:41.32 | miknix | Kevin2, hum... thats was a good idea |
| 00:41.50 | paulproteus | exco, It's doing the upgrades now, slowly but surely. |
| 00:42.00 | exco | cool |
| 00:42.11 | miknix | Kevin2, ok, I'll enable gpios for it tomorrow and use your driver then |
| 00:42.27 | exco | btw, paulproteus, do we need other branches than o.e.dev |
| 00:42.32 | miknix | Kevin2, thanks |
| 00:42.35 | paulproteus | exco, I don't think so. |
| 00:44.27 | Kevin2 | miknix: No problem. (BTW, I meant bbkeys just provides kbd and gpio functions -- one must map backlight and led via high level code.) |
| 00:44.55 | miknix | Kevin2, I did understand :) |
| 00:48.02 | miknix | going to sleep |
| 00:48.05 | miknix | have a good night |
| 00:48.07 | *** part/#htc-linux miknix (n=miknix@81.193.89.28) |
| 01:16.26 | *** join/#htc-linux p3t3r__ (n=p3t3r__@wlan.net-you.de) |
| 01:16.26 | *** join/#htc-linux tg (i=tg@digit.drk.hu) |
| 01:16.26 | *** join/#htc-linux Pryan (n=pryan@84.125.95.124.dyn.user.ono.com) [NETSPLIT VICTIM] |
| 01:16.26 | *** join/#htc-linux Primax^ (n=primax@90-224-25-66-no112.tbcn.telia.com) [NETSPLIT VICTIM] |
| 01:16.27 | *** join/#htc-linux darkerror05 (n=darkerro@cpe-72-230-169-235.rochester.res.rr.com) [NETSPLIT VICTIM] |
| 01:16.27 | *** join/#htc-linux toi (n=pleemans@d5152D3B4.access.telenet.be) [NETSPLIT VICTIM] |
| 01:16.27 | *** join/#htc-linux raph_ael (i=raphael@kikoolol.orbus.fr) [NETSPLIT VICTIM] |
| 01:16.27 | *** join/#htc-linux dase (i=dase@p1atin.de) [NETSPLIT VICTIM] |
| 01:41.23 | exco | paulproteus: gotta get up in about 5 hours... see you tomorrow |
| 01:52.03 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 02:37.49 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-a6d16978f3ffe2d2) |
| 03:01.34 | *** join/#htc-linux surgex0 (i=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 03:57.05 | *** join/#htc-linux the_sys0p` (i=the_sys0@gateway/tor/x-4e4f75563758bb3c) |
| 04:34.59 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 05:26.38 | *** join/#htc-linux exco (n=excogita@e181103055.adsl.alicedsl.de) |
| 05:36.56 | exco | good morning |
| 05:48.59 | *** join/#htc-linux kiozen (n=oeichler@p54929D76.dip0.t-ipconnect.de) |
| 05:59.11 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-328418cc7540150a) |
| 05:59.55 | paulproteus | exco, Wow, you're awake already! |
| 06:06.54 | exco | yes... btw the monotone update doesn't seem to have gone through |
| 06:12.31 | surgex0 | (*) If you think that sounds pathetic, go talk to JFK's speech-writers. They did get to the moon though... |
| 06:12.32 | surgex0 | lol |
| 06:12.33 | surgex0 | :P |
| 06:12.36 | surgex0 | i like the wiki page |
| 06:13.06 | paulproteus | surgex0, Er, which wiki page? |
| 06:13.21 | surgex0 | the 1 in topic, xanadux |
| 06:16.18 | kiozen | well, of course it's all about world domination |
| 06:20.34 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 06:21.16 | paulproteus | exco, It's not going to work to give you a shell on my main server, so I'm creating a Debian unstable virtual server and moving your account there. |
| 06:21.26 | paulproteus | (It's not going to work in that getting mtn to update there is too much hassle.) |
| 06:23.34 | exco | paulproteus: just if it's not too much of a hassle |
| 06:23.40 | paulproteus | It's not. (-: |
| 06:28.24 | exco | I have to get going - ttyl paulproteus |
| 06:28.28 | paulproteus | ttyl, exco |
| 07:17.06 | *** join/#htc-linux rob_w|laptop (n=rob@p549B8F88.dip0.t-ipconnect.de) |
| 08:02.55 | paulproteus | If exco gets back and I'm asleep, tell him to log into unstable.makesad.us with his usual key. |
| 08:16.52 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 08:38.05 | *** join/#htc-linux mistadman (n=mistadma@adsl-6-113-157.msy.bellsouth.net) |
| 08:57.49 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 09:03.50 | *** join/#htc-linux shoragan (n=shoragan@debian/developer/shoragan) |
| 09:05.21 | dcordes | dzo: hi, do you have a minute to send me testing rootfs? |
| 09:24.47 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 09:28.09 | *** join/#htc-linux uplinked (n=linked@c-68-40-179-243.hsd1.mi.comcast.net) |
| 09:30.45 | uplinked | anyone know the mtype for hermes, off the top of their head? :) |
| 09:31.00 | uplinked | (and does it matter, if haret autodetects it as a hermes?) |
| 09:45.38 | dcordes | http://www.arm.linux.org.uk/developer/machines/?action=list&id=1213 |
| 09:52.42 | uplinked | sweet, thanks! |
| 09:53.43 | *** join/#htc-linux miknix (n=miknix@81.193.89.28) |
| 09:53.59 | miknix | cr2, hello |
| 10:14.29 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 10:19.41 | *** join/#htc-linux Marex (n=marex@85-132-216-250-eth3-gwfm10-user.802.cz) |
| 10:29.00 | *** join/#htc-linux patoche (n=pat@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 10:32.27 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 10:43.09 | *** join/#htc-linux patoche (n=root@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 10:47.06 | *** join/#htc-linux infernixx (i=nix@unaffiliated/infernix) |
| 10:56.02 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 11:12.05 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 11:27.13 | *** join/#htc-linux revertive (n=revertiv@83.119.75.151) |
| 11:27.43 | BabelO | cr2: hi, can you tell me if the dxf structure is ok for you ? can you do something with it ? |
| 11:28.08 | miknix | BabelO, the i2c-gpio bitbang driver works for me |
| 11:28.19 | miknix | BabelO, its much faster in I/O than omap-i2c |
| 11:30.28 | BabelO | miknix: good ;), but you need to pilot cpld too |
| 11:31.36 | miknix | BabelO, we have acquired a lot of info |
| 11:31.53 | miknix | BabelO, we know which bits to set to enabled each led color, backlight intensity |
| 11:32.10 | miknix | BabelO, rumble, keypad backlight.... |
| 11:33.46 | BabelO | i need to go |
| 11:33.47 | BabelO | bbl |
| 12:02.42 | miknix | cr2, hi |
| 12:05.46 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 12:05.55 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 12:06.06 | marbalon | dcordes: hi |
| 12:07.24 | marbalon | dcordes: there is a bug in Makefile in mach-msm, you should move kaiser-smd.o to obj-$(CONFIG_MACH_HTCKAISER) |
| 12:08.03 | marbalon | and change CONFIG_MSM_KAISERSMD to CONFIG_MSM_KAISER_TTY as option |
| 12:08.41 | marbalon | now if you get errors when you compile without CONFIG_MSM_KAISERSM option |
| 12:09.13 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 12:14.42 | *** join/#htc-linux patoche (n=root@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 12:22.00 | *** join/#htc-linux miknix (n=miknix@81.193.94.33) |
| 12:34.24 | miknix | cr2, I found the bitmask for chips 4 and 5 connected to i2c: http://pastebin.com/d754ecf03 |
| 12:35.02 | miknix | cr2, we can now control backlight brightness, leds and keypad brightness. |
| 12:35.31 | miknix | cr2, chip 6 has some control about rumble and dpad light. didnt dump it yet |
| 12:42.16 | dcordes | marbalon: hi. can you send me a diff together with your other changes like egpio? |
| 12:44.35 | marbalon | it isn't requied now I have access to git repository too ;) |
| 12:44.36 | marbalon | http://projects.linuxtogo.org/projects/mobile-linux/ |
| 12:45.50 | dcordes | marbalon: are you Angelo? |
| 12:46.14 | marbalon | now I need to learn git usage, till now I only works with CVS |
| 12:46.36 | dcordes | ah I see you in the list |
| 12:47.00 | dcordes | looks like we are three msmlers by now :) |
| 12:50.02 | marbalon | dcordes: hmm somethings wrong with wiki.xda-developers.com, cant access to CPLD info |
| 12:50.42 | dcordes | marbalon: me n'either. seems kinda down |
| 12:51.48 | dcordes | I won't change anything gpio or cpld related in the tree until you have your stuff done. so we don't do dual work |
| 12:51.56 | dcordes | I'm currently playing with AT |
| 12:53.47 | dcordes | needs local copy of the wiki pages |
| 12:56.18 | marbalon | I'm still playing with keyboard but, if I finish we have full keyboard working, arrow keys, back light, leds etc.. |
| 12:57.12 | dcordes | did you find a solution for control? |
| 12:58.37 | marbalon | dcordes: control of what ? |
| 12:59.38 | marbalon | dcordes: all gpio num related with keyboard are known |
| 12:59.57 | dcordes | marbalon: sorry <ctrl> I mean |
| 13:00.47 | marbalon | dcordes: yes ctrl work fine with leds status - two leds on |
| 13:01.01 | marbalon | menu key = ctrl |
| 13:01.29 | marbalon | and it is 3-state like Fn and caps |
| 13:01.46 | dcordes | ok |
| 13:02.04 | dcordes | where did you put they key for <ctrl>-modifier? |
| 13:02.18 | marbalon | there is only one problem, no irq rated with egpio, so I need to use pooling mode to wath arrow keys |
| 13:02.36 | marbalon | menu key is modifier |
| 13:03.51 | dcordes | I have no idea about egpio+irq |
| 13:03.51 | marbalon | dcordes: *rated = related |
| 13:04.04 | dcordes | I though we only use egpio for the gpios which are on the cpld |
| 13:04.05 | *** join/#htc-linux JohnnyK (n=johnnyk@area1-132-gw.hkfree.org) |
| 13:17.49 | dcordes | marbalon: do you have the second IRQ register in your haretconsole regs-msm.py? |
| 13:17.54 | dcordes | <PROTECTED> |
| 13:18.52 | marbalon | I don't use haret console till now |
| 13:19.08 | dcordes | it's useful |
| 13:20.01 | dcordes | I don't have network access to my kaiser right now. could you get haretconsole, add the linem establish a connection, run wirq, press arrow keys and see if you get an irq? |
| 13:20.19 | dcordes | s/linem/line/ |
| 13:21.11 | marbalon | dcordes: read this registers and check irq status changes but nothing changed when press arrow keys |
| 13:22.05 | marbalon | dcordes: irq 31+2 occurs when press other keys |
| 13:23.29 | *** join/#htc-linux toi (n=pleemans@d5152D3B4.access.telenet.be) |
| 13:26.55 | *** join/#htc-linux patoche (n=patoche@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 13:27.41 | dcordes | marbalon: hm shit. so you have the two irq registers in regs-msm.py? |
| 13:28.51 | marbalon | dcordes: I use kernel module to read values in regs etc |
| 13:29.55 | marbalon | dcordes: I know that is no the easiest way but works for me ;) |
| 13:30.26 | dcordes | marbalon: what is that module's name again? |
| 13:31.11 | marbalon | dcordes: I add some lines in keyboard driver |
| 13:31.17 | marbalon | bbl, work->home |
| 13:33.36 | infernixx | dcordes: havent tried to build the kernel tree yet |
| 13:33.40 | infernixx | hows driver progress? |
| 13:33.57 | dcordes | good to see you |
| 13:34.22 | dcordes | nothing much happened. don't know what's your status though. just see gitweb |
| 13:46.57 | infernixx | busy with work :) |
| 13:47.03 | infernixx | thats my status |
| 13:54.22 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 13:58.21 | *** join/#htc-linux |patoche| (n=patoche@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 14:14.58 | *** join/#htc-linux miknix (n=miknix@193.137.97.162) |
| 14:37.06 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 14:48.28 | uplinked | so i just spent the last 6 hours reading everything i could find on hermes linux |
| 14:49.50 | uplinked | pretty much came to the conclusion that it's "close" but not done, the rest of the work is "very tricky/tedious", and cr2 (the only guy who's mentioned working on it) has other projects (n560) to finish before he goes back to the hermes/athena/etc |
| 14:50.19 | uplinked | that being the case, and assuming that i'm talking to empty space and irc bots at this point, i want to help :) |
| 14:50.56 | kiozen | uplinked: :) no bots here, but cr2 is away for today |
| 14:51.02 | *** join/#htc-linux TimRiker (n=timr@68.27.158.93) |
| 14:51.17 | uplinked | well, logs at least |
| 14:51.41 | uplinked | i'm pretty familiar with the logs. i read every one since 2007-09-30 that contains the word "hermes" |
| 14:53.32 | uplinked | that being said, my hardware/asm/c skills are... undeveloped. but i'm a quick learner and a steady worker, and if anyone wouldn't mind taking a few minutes to aim me in the right direction, i'd like to start with testing NAND and work my way up to the ATI SD stuff. |
| 14:59.17 | *** join/#htc-linux amd64lover (n=miknix@193.137.97.147) |
| 15:03.59 | amd64lover | BabelO, http://pastebin.com/d4401f121 |
| 15:06.24 | dcordes | uplinked: iirc ATI is the biggest problem on hermes cr2 faces |
| 15:07.53 | uplinked | dcordes: when you say ATI, you mean the ATI SD card slot, right? |
| 15:08.21 | dcordes | I think so. But there are also other things probided by the ATI chip |
| 15:08.33 | uplinked | ahh, gotcha |
| 15:09.02 | dcordes | unfortunately I have no idea where hermes development goes on |
| 15:09.33 | dcordes | it's not in hh.org tree, is it? |
| 15:11.38 | uplinked | haven't been able to figure that out yet, either |
| 15:11.55 | BabelO | miknix: good |
| 15:12.19 | uplinked | cr2 mentioned that the NAND driver was also giving him trouble on his hermes, 4/15/2008, ~1300h here: http://ibot.rikers.org/%23htc-linux/20080415.html.gz |
| 15:12.23 | BabelO | kiozen: hi, how can i found parallele of a map i have ? i mean the long /lat line ? |
| 15:12.30 | miknix | BabelO, Chip 5 seems to give other output than the dpad status |
| 15:12.40 | miknix | BabelO, I think its the battery charge |
| 15:12.59 | kiozen | BabelO: huh? |
| 15:13.24 | uplinked | i figured that looked like something simpler for me to test; like i said, i'm not exactly a hardware guy typically, but i want to learn enough to help |
| 15:14.01 | uplinked | is wiki.xda-developers.com down for anyone else? |
| 15:14.01 | BabelO | kiozen: i ve two map with the blue grid, but without information on it |
| 15:14.26 | kiozen | BabelO: hm, that is hard |
| 15:14.38 | BabelO | :( |
| 15:14.40 | miknix | uplinked, the website goes fine |
| 15:15.04 | uplinked | hmm, everything else loads alright for me, just not wiki. |
| 15:15.13 | kiozen | you need at least two known point, mustn't be on the grid |
| 15:16.01 | kiozen | BabelO: with these ref. points you can try different projections / datums |
| 15:16.18 | BabelO | kiozen: ok, it is in the Alp :) |
| 15:16.34 | kiozen | BabelO: do not use mountain tops! |
| 15:16.45 | kiozen | BabelO: use road crossings :) |
| 15:17.01 | BabelO | kiozen: btw, do you have an idea how can i convert the Tiff to pgm ? |
| 15:17.08 | BabelO | kiozen: that is what i do now ;) |
| 15:17.18 | kiozen | BabelO: gimp? |
| 15:18.05 | BabelO | kiozen: in the code, it is to implement the binarize / symbol system in gt |
| 15:18.56 | kiozen | BabelO: ah ok, QT surely fails, doesn't it? |
| 15:19.33 | BabelO | kiozen: i did not check if the happy let me do it |
| 15:19.46 | BabelO | kiozen: elese i ve to depend from imagmagick devel |
| 15:19.57 | kiozen | BabelO: yuck |
| 15:20.52 | kiozen | BabelO: maybe there is a small lib |
| 15:20.57 | BabelO | kiozen: i don't really like that :-( |
| 15:21.29 | BabelO | kiozen: ok, else i change the qgar library code, to extact tiff directly, but i need grey level to do |
| 15:21.37 | kiozen | can't you work on a RGB buffer directly? |
| 15:22.35 | kiozen | BabelO: QT will convert 8 bit indexed to RGBA automatically |
| 15:26.18 | BabelO | kiozen: ok i ll look, it is just math formula after all |
| 15:27.01 | dcordes | uplinked: yyep wiki also down for me |
| 15:27.05 | kiozen | BabelO: that's what I would say, and RGBA is stored in a 32 bit iteger commonly |
| 15:31.08 | BabelO | kiozen: do you download the bz2 i post yesturday ? |
| 15:31.31 | kiozen | BabelO: yes but don't know how to look at dxf |
| 15:31.49 | BabelO | kiozen: ok, the binarize system is ok |
| 15:32.25 | BabelO | kiozen: the connex system too, i can extract text ( actuaally just the coord of box contaiining text :) |
| 15:33.25 | kiozen | BabelO: any chance that will work on a high color map like mine? |
| 15:33.47 | kiozen | BabelO: because many hiking maps are like thiat |
| 15:34.12 | BabelO | humm |
| 15:35.31 | BabelO | kiozen: if you found the publication here http://citeseer.ist.psu.edu/ related to maps or color process, i can do it :) you to :) |
| 15:36.21 | *** join/#htc-linux marbalon (n=balon@aegv26.neoplus.adsl.tpnet.pl) |
| 15:37.35 | BabelO | ola marbalon |
| 15:37.58 | BabelO | marbalon: did you found your kerboard issue ? |
| 15:39.24 | marbalon | BabelO: I found everything except EGIPO irq |
| 15:40.35 | marbalon | BabelO: but you talking about input_events ? |
| 15:40.53 | BabelO | marbalon: yes :) |
| 15:40.59 | BabelO | did you solve it ? |
| 15:42.08 | marbalon | BabelO: yes, add set_bit(kaiser_buttons[row][col].key, keyboard_dev->keybit) instead old method and just works |
| 15:42.26 | BabelO | good :) |
| 15:42.48 | BabelO | marbalon: and you did not found the cpld irq :( |
| 15:44.09 | marbalon | BabelO: yes, I hope pooling gpio don't kill CPU |
| 15:45.01 | marbalon | BabelO: ts driver based on pooling mode and works fine |
| 15:45.14 | BabelO | : |
| 15:45.35 | marbalon | BabelO: now learning about git usage |
| 15:48.38 | dcordes | marbalon: ping me if you have a question |
| 15:48.59 | marbalon | dcordes: ping ;) |
| 15:49.01 | dcordes | I'm not too advanced but I know the most important commands |
| 15:50.00 | marbalon | dcordes: let start what is correct path for our repository ? |
| 15:50.58 | dcordes | git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git |
| 15:51.07 | dcordes | git checkout -b htc-msm origin/htc-msm |
| 15:51.27 | dcordes | that will clone and setup the branch you need (htc-msm) |
| 15:52.07 | marbalon | I missed home in path, but was close ;) |
| 15:52.27 | dcordes | what I used beyond that is git-diff git-add git-rm git-status |
| 15:54.52 | marbalon | bbl, I have only 1MBit/s |
| 15:57.18 | *** join/#htc-linux miknix (n=miknix@193.137.97.159) |
| 15:59.53 | BabelO | kiozen: found interesting thing ? :) |
| 16:00.24 | kiozen | BabelO: did not look, currently hack Garmin plugins into GT |
| 16:07.39 | dcordes | bbl |
| 16:16.35 | *** join/#htc-linux patoche (n=patoche@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 16:18.29 | *** join/#htc-linux silven (n=zmc@adsl-72-50-80-237.prtc.net) |
| 16:18.44 | *** part/#htc-linux silven (n=zmc@adsl-72-50-80-237.prtc.net) |
| 16:29.28 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 16:32.52 | dcordes | lol http://www.heise.de/newsticker/Ubuntu-fuer-PDAs--/meldung/107645 |
| 16:33.08 | *** join/#htc-linux p3t3r__ (n=p3t3r__@wlan1.net-you.de) |
| 16:36.18 | kiozen | BabelO: doomsday :) let's see if that rootfs of cr2 works. Wish me luck. |
| 16:36.20 | kiozen | bbl |
| 16:37.36 | *** join/#htc-linux miknix (n=miknix@193.137.97.147) |
| 16:40.16 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 16:55.25 | *** join/#htc-linux |patoche| (n=patoche@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 17:05.03 | *** join/#htc-linux pH5 (n=ph5@e178199189.adsl.alicedsl.de) |
| 17:34.33 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 17:39.21 | *** join/#htc-linux patoche (n=root@lns-bzn-32-82-254-51-4.adsl.proxad.net) |
| 17:44.15 | *** join/#htc-linux miknix (n=miknix@81.193.94.33) |
| 18:02.13 | *** join/#htc-linux S^P (n=Masood@static-host119-30-91-38.link.net.pk) |
| 18:30.55 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 18:31.48 | marbalon | back |
| 18:33.52 | dcordes | are ey |
| 18:34.04 | dcordes | lol |
| 18:34.10 | dcordes | hi marbalon |
| 18:34.17 | dcordes | git cloned? |
| 18:34.30 | marbalon | yes |
| 18:35.15 | marbalon | ok, try to apply egpio fixes and try to commit |
| 18:38.01 | dcordes | ok |
| 18:38.05 | dcordes | bbl |
| 18:51.10 | *** join/#htc-linux LunohoD_ (n=alex@e180068241.adsl.alicedsl.de) |
| 19:08.43 | miknix | cr2, sound device is also enabled/disabled by i2c. I've just found the address |
| 19:14.00 | miknix | and I think chip 3 returns the volume level |
| 19:23.28 | marbalon | dcordes: ping |
| 19:27.01 | marbalon | pH5: hi |
| 19:32.03 | pH5 | good evening |
| 19:32.17 | marbalon | <PROTECTED> |
| 19:32.58 | marbalon | I cloned git repository, switch to htc-msm branch |
| 19:33.37 | marbalon | add some changes, and use git commit <some files> |
| 19:34.14 | marbalon | and now a wat to send this changes to server |
| 19:34.36 | marbalon | how can I do this ? |
| 19:35.01 | pH5 | ok, you can use "git-push ssh://marbalon@linuxtogo.org/home/groups/mobile-linux/kernel.git htc-msm" |
| 19:35.11 | pH5 | do you have user.email and user.name set up correctly with git-config? |
| 19:35.33 | marbalon | yes |
| 19:36.45 | marbalon | it sends only commited changes ? |
| 19:37.38 | pH5 | yes. this command sends only the refs leading up to htc-msm that are not yet in the remote repository. |
| 19:38.10 | marbalon | well done. thanks ;) |
| 19:39.41 | pH5 | great |
| 19:40.55 | pH5 | marbalon: you should try to have a look at the htc-egpio driver from mainline, it would be good if you could get that one to work instead of the hh.org one. |
| 19:41.47 | pH5 | If you spend a lot of time on gpiodev2 and the old htc-egpio it might not be worth it because you have to update anyway when you want to push the kaiser code towards mainline. |
| 19:50.33 | *** part/#htc-linux uplinked (n=linked@c-68-40-179-243.hsd1.mi.comcast.net) |
| 20:31.57 | *** join/#htc-linux uplinked (n=linked@c-68-40-179-243.hsd1.mi.comcast.net) |
| 20:34.00 | *** join/#htc-linux aLeSD (n=alex@119.Red-88-19-11.staticIP.rima-tde.net) |
| 20:40.38 | *** join/#htc-linux S^P (n=Masood@static-host119-30-95-34.link.net.pk) |
| 20:42.12 | *** join/#htc-linux exco (n=excogita@e181104217.adsl.alicedsl.de) |
| 21:05.53 | exco | hi paulproteus |
| 21:14.21 | *** part/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 21:17.22 | *** join/#htc-linux rmoravci1 (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 21:19.39 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfba18.pool.einsundeins.de) |
| 21:33.57 | paulproteus | exco, Hey - inspired by you, I started a build. |
| 21:34.03 | paulproteus | exco, You can ssh to unstable.makesad.us and build there if you like too. |
| 21:34.35 | paulproteus | I got a uclibc image finished, and I'm on task 1022 of 4982 for the openmoko-devel-image. |
| 21:34.45 | paulproteus | It's been going since about six hours ago, I think. |
| 21:34.57 | exco | nice. |
| 21:35.05 | exco | on your local machine? |
| 21:35.11 | paulproteus | No, on unstable.makesad.us. |
| 21:35.18 | paulproteus | Which is the same machine as rose, just a Vserver that runs Debian Unstable. |
| 21:35.27 | paulproteus | It's in my $HOME on unstable.makesad.us. |
| 21:35.46 | exco | that's another one of your servers? |
| 21:35.52 | exco | wasn't the other one rose? |
| 21:36.19 | paulproteus | It's the same machine as rose. |
| 21:36.26 | paulproteus | It's just a virtual server that runs Debian unstable. |
| 21:36.42 | paulproteus | Same physical hardware, different OS install, different IP address. |
| 21:37.02 | exco | ok... so you could just install monotone without messing with your configuration? |
| 21:38.11 | exco | well... if it is already building ... I can't do anything more - can I? |
| 21:38.27 | paulproteus | exco, I couldn't just install the more recent mtn, that's right. |
| 21:38.36 | paulproteus | But yeah - it's already building, so I guess there's nothing for you to do on that front. |
| 21:39.30 | exco | this is then a latest build of Angström&OM? |
| 21:41.22 | paulproteus | Yup, that's what's building. |
| 21:42.04 | exco | I hope it's working at least the things that are working with the dec07 images |
| 21:42.17 | uplinked | anyone else slightly confused by nokia's marketing strategy? http://www.symbian.com/phones/nokia_n93i.html |
| 21:43.22 | exco | what are you getting at, uplinked? |
| 21:43.23 | uplinked | it appears, and i might just be colorblind, that they're trying to sell a big, expensive, 3.2mp/qwerty/wifi phone in europe and africa |
| 21:43.57 | uplinked | as... opposed to... i don't know, where might there be more market demand for such a phone? china? the u.s.? japan? |
| 21:44.15 | uplinked | i'm sure it sells very well in europe. but africa? |
| 21:44.28 | uplinked | [i shouldn't forget australia, too] |
| 21:45.01 | exco | guess they'd rather buy the iphone for "status symbol"... even in africa... |
| 21:45.20 | uplinked | sorry, just struck me as odd. i'm sure that nokia's team of salespersons have far more experience with the global economy than i do, but... |
| 21:47.08 | exco | they just closed down their factory in de... so they don't have good press around here atm... |
| 21:47.15 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 21:48.00 | exco | My second mobile was a Nokia ... it did it's job quite well ... never had one since though |
| 21:48.21 | uplinked | yeah, first 3 phones were all nokia, loved them to death |
| 21:48.38 | uplinked | this was back in the day when i only wanted a phone that made calls- and they did so. with great efficacy. |
| 21:49.25 | uplinked | now, i look at the n560, and can't really see anything past it's accute lack of GSM, or even CDMA. |
| 21:49.26 | exco | yes (bet you didn't "waste" as much time on those) |
| 21:49.46 | uplinked | oh, for sure |
| 21:50.05 | uplinked | it was "dial, click, call, hang up." |
| 21:50.20 | exco | don't you sometimes miss those days? |
| 21:51.24 | uplinked | last night, on wm6/hermes, i was calling voicemail to see what my mom had left, and mid-call, i heard the call-connecting ring. *shrugs* ok, i looked at the phone, and it still said "voicemail, connected" without indicatinig that i was in two calls. three rings later and my mom picks up... |
| 21:51.32 | exco | I sometimes just want to throw all that tech stuff out the window... being an eco ... NOT |
| 21:51.32 | uplinked | i don't know how/why it decided to call her |
| 21:51.33 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 21:52.04 | uplinked | and especailly not at 4am. and especially not after some extra bonding time with jim beam... |
| 21:52.08 | exco | apparently the phone new? |
| 21:52.20 | exco | oh... that sounds bad |
| 21:52.27 | uplinked | new? no, 5 months old. |
| 21:52.45 | exco | and you couldn't just hang up either ... or she'd be scared sth happened to you |
| 21:53.23 | uplinked | haha, it'd have been a lot worse, except my phone is well reputed among my friends for it's sense of independance. most people i call have either gotten spontaneously dialed, or been dropped mid-convo due to hermes dialing someone else. |
| 21:54.08 | uplinked | this is why i want linux ATI SD support on hermes :-P |
| 22:12.22 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 22:13.29 | *** part/#htc-linux uplinked (n=linked@c-68-40-179-243.hsd1.mi.comcast.net) |
| 22:15.38 | exco | good night y'all |
| 22:15.43 | *** part/#htc-linux exco (n=excogita@e181104217.adsl.alicedsl.de) |
| 22:19.38 | *** join/#htc-linux lamikr (n=lamikr@dyn60-31.dsl.spy.dnainternet.fi) |
| 22:25.04 | *** join/#htc-linux aLeSD (n=alex@119.Red-88-19-11.staticIP.rima-tde.net) |
| 22:31.44 | *** join/#htc-linux maleki (n=Miranda@80.191.134.46) |
| 22:35.19 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 23:34.02 | *** join/#htc-linux CVirus (n=GoD@82.201.174.38) |
| 23:46.50 | *** join/#htc-linux patoche_ (n=root@lns-bzn-33-82-252-41-203.adsl.proxad.net) |