| 00:01.34 | dcordes | dzo, hi there. No I have a method which makes it boot properly every time: I copy the initrd from sd to nand before booting. Also I have earlyharetlog.txt so haret does logging. Don't know why but that works.. |
| 00:04.15 | dcordes | dzo, did you try SD on vogue yet? |
| 00:14.27 | dzo | No, not yet, Does the android runtime still crash for you though. |
| 00:19.10 | dcordes | Oh didn't try that sorry |
| 00:19.27 | dcordes | I was experimenting with a stripped down image which boots into a terminal |
| 00:19.37 | dcordes | provided by marbalon |
| 01:36.23 | dcordes | dzo, I just tried booting your newest image. it hangs during the red loading thing |
| 01:41.21 | mistadman | What does: #define _IPAQ_ASIC3_SPI_Base 0x0400 mean? It this suppose to be the mem location of my spi register? |
| 01:46.46 | dcordes | dzo, still around? |
| 01:47.04 | mistadman | Hey dcordes |
| 01:47.50 | dcordes | hi mistadman |
| 01:48.13 | mistadman | Do you know anything about the Linux kernel? |
| 01:48.27 | dcordes | yes |
| 01:48.46 | mistadman | I am trying to figure out what: #define _IPAQ_ASIC3_SPI_Base 0x0400 means.. |
| 01:49.07 | mistadman | Is this suppose to be the location of my SPI Register? |
| 01:49.48 | mistadman | -->0x400 |
| 01:49.54 | dcordes | what's SPI? |
| 01:49.55 | mistadman | -->0x0400 |
| 01:50.39 | mistadman | Good question! |
| 01:51.22 | mistadman | Do you know what this defines? 0x0400 |
| 01:51.29 | mistadman | Forget SPI |
| 01:58.15 | dcordes | a memory base address :) |
| 01:58.15 | dcordes | mistadman, what are you intenting to do? |
| 01:58.43 | mistadman | I am in the process of porting Android to the Athena |
| 01:58.44 | dcordes | dzo, I just read your whole 'diffs' and wonder where you added the radio functionallity for vogue |
| 01:59.18 | dcordes | android? sounds to me like you lack basic hardware support |
| 01:59.33 | mistadman | I ran into two problems: 1 no keyboard 2. no "page flipping" |
| 01:59.38 | mistadman | Yeap |
| 01:59.57 | dcordes | what's page flipping? screen rotating? |
| 02:00.42 | mistadman | No, its "double buffering". Its a graphics technique to reduce flickering |
| 02:01.03 | mistadman | http://en.wikipedia.org/wiki/Double_buffering |
| 02:01.34 | mistadman | The lates Android release incorporates this |
| 02:02.20 | mistadman | Unfortunately the linux video driver for the Athena does not support this (yet)! |
| 02:07.26 | dcordes | mistadman, did you try qtopia4 on it? |
| 02:10.17 | mistadman | No. I want ANDROID! LOL! |
| 02:11.39 | dcordes | lol |
| 02:34.05 | infernix | dcordes: managed to get an angstrom initrd yet? |
| 03:46.04 | *** join/#htc-linux dcordes (n=user2@f048041015.adsl.alicedsl.de) |
| 03:55.55 | dcordes | infernix, no I still have problems with the nokernel thing |
| 03:56.26 | dcordes | btw instead of building wit nokernel I could make a recipe for the linux-msm tree |
| 03:56.33 | dcordes | and include one of the patches |
| 03:57.04 | dcordes | infernix, I will try this after I got some sleep later |
| 04:31.58 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 05:31.23 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 05:53.03 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 06:10.53 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9255.dip0.t-ipconnect.de) |
| 06:17.54 | *** join/#htc-linux TeringTuby (n=maarten@195-241-125-243.ip.telfort.nl) |
| 06:24.27 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 06:25.38 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 06:32.22 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 06:48.42 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 06:49.27 | marbalon | dcordes: ping |
| 06:53.45 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 06:56.02 | BabelO_ | morning |
| 07:01.24 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 07:05.34 | BabelO_ | bonjour kiozen |
| 07:05.45 | kiozen | salut BabelO_ |
| 07:05.55 | kiozen | BabelO_ 30'' TFT is great! |
| 07:06.06 | BabelO_ | yeah, you got one ? ;) |
| 07:06.16 | BabelO_ | 4:3 ? |
| 07:06.20 | kiozen | BabelO_: :) |
| 07:06.25 | kiozen | 16:9 |
| 07:06.29 | kiozen | samsung 305T |
| 07:06.46 | *** join/#htc-linux LunohoD_ (n=alex@e180071232.adsl.alicedsl.de) |
| 07:07.20 | kiozen | you have to tell me how you silenced the NVidia fan |
| 07:09.50 | BabelO_ | kiozen: time to get a nice picture ;) http://www.vuze.com/content/FeaturedContent.html;jsessionid=FE1E2BC6A90ED117F08E7ED4800C5855.web03 |
| 07:09.54 | BabelO_ | video i mean |
| 07:10.30 | kiozen | hehe :) |
| 07:10.47 | kiozen | have to install xine 1st |
| 07:11.09 | BabelO_ | i use some of HD test video |
| 07:11.22 | BabelO_ | kiozen: for silence nvidia, you get the latest driver ? |
| 07:11.35 | BabelO_ | under linux just use nvclock |
| 07:12.34 | kiozen | BabelO_: yes I just downloaded yesterday |
| 07:12.44 | kiozen | BabelO_: nvclock that's an app |
| 07:12.45 | kiozen | ? |
| 07:13.06 | BabelO_ | yes |
| 07:13.23 | kiozen | BabelO_: hm, no nvclock here |
| 07:13.34 | kiozen | nvidia-bug-report.sh nvidia-installer nvidia-settings nvidia-smi nvidia-xconfig |
| 07:14.03 | BabelO_ | kiozen: what is you nvidia reference ? |
| 07:14.16 | BabelO_ | kiozen: http://linuxhardware.org/nvclock/ |
| 07:14.43 | kiozen | ok, it's an dditional app |
| 07:15.19 | kiozen | BabelO_: btw how do you control the system fans |
| 07:15.21 | kiozen | ? |
| 07:15.28 | BabelO_ | kiozen: with lm_sensors |
| 07:16.04 | BabelO_ | kiozen: they provide a fan speed script, and on my board i can connect each fan to a different temp sensor |
| 07:16.11 | BabelO_ | by software |
| 07:16.48 | kiozen | BabelO_: ok, how many sys fans do you have |
| 07:16.54 | BabelO_ | kiozen: only specific thing on asus is to disable there qfan control in bios |
| 07:17.13 | BabelO_ | kiozen: 2 sys fan + cpu fan |
| 07:17.34 | kiozen | BabelO_: do you have 2 sys fan connectors? |
| 07:17.51 | BabelO_ | kiozen: yes, i have 3 sys fans |
| 07:18.26 | kiozen | BabelO_: hm, only got one sys fan connector and one cpu fan connecter |
| 07:18.39 | kiozen | BabelO_: however I do not have a cpu fan |
| 07:18.40 | BabelO_ | kiozen: but your box is smaller |
| 07:19.28 | kiozen | the one sys fan is on the HDD and the 2nd over the GCA |
| 07:19.57 | BabelO_ | kiozen: http://pastebin.ca/992962 |
| 07:20.10 | BabelO_ | what is GCA ? |
| 07:21.46 | BabelO_ | kiozen: most of the time the other fan are stopped, cpu fan stop sometimes too |
| 07:22.38 | BabelO_ | i did not use the AUX temp sensors, but just hack hardware sensor driver to get my nvidia temp sensors with the system sensor |
| 07:22.41 | kiozen | gaphic card adapter |
| 07:22.50 | BabelO_ | kiozen: ok |
| 07:23.06 | kiozen | BabelO_: nvclock_gtk fails |
| 07:23.12 | BabelO_ | kiozen: what is your nvidia reference geforce 8xxx ? |
| 07:23.20 | kiozen | 8800 GT |
| 07:23.29 | BabelO_ | kiozen: i use only the qt version or command line |
| 07:23.54 | kiozen | hm no qt version here |
| 07:24.04 | kiozen | what is needed for the cmd line? |
| 07:24.50 | BabelO_ | kiozen: nvclock -F |
| 07:24.51 | kiozen | grr: Error: adjustment of the fanspeed isn't supported on your type of videocard! |
| 07:25.13 | BabelO_ | kiozen: you use the 0.8 beta 3 version ? |
| 07:25.46 | kiozen | BabelO_ yes |
| 07:25.52 | BabelO_ | kiozen: nvclock -f -F 500 |
| 07:26.03 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9255.dip0.t-ipconnect.de) |
| 07:26.21 | kiozen | BabelO_: same, too cheap card :) |
| 07:26.39 | BabelO_ | kiozen: what nvclock -i report ? |
| 07:26.41 | kiozen | I should have spent 300,- instead off 200.- :/ |
| 07:27.19 | kiozen | BabelO_: http://pastebin.ca/992967 |
| 07:29.02 | BabelO_ | kiozen: strange, and with nvidia-settings ? |
| 07:30.53 | kiozen | BabelO_: cant find a thing to control fan |
| 07:31.32 | BabelO_ | kiozen: your card have a 3 wire fan ? |
| 07:31.57 | kiozen | good question I have to look later on :) |
| 07:32.47 | kiozen | BabelO_: solved, only 2 |
| 07:33.16 | BabelO_ | ok, else you can look at nvnews.net, good website for information |
| 07:33.44 | kiozen | shit, the GCA fan is the loudest |
| 07:38.32 | BabelO_ | kiozen: http://www.levicki.net/reviews/hardware/2008/02/01/ASUS_EN8800GT_G_HTDP_512M_no_temperature_and_fan_control.php |
| 07:38.39 | BabelO_ | is it this one ? |
| 07:38.53 | kiozen | think so |
| 07:39.41 | kiozen | I choose it by it's size, it must not be longer than 25cm |
| 07:42.22 | BabelO_ | kiozen: ok, but they can control fan with just power cycle and only a 2 wire fan, have to look at the beta driver, latest is 169.12 and beta is 171 something |
| 07:43.14 | kiozen | what driver? nvidia? |
| 07:45.28 | BabelO_ | kiozen: yes |
| 07:46.26 | kiozen | I do have 173.08 |
| 07:53.18 | BabelO_ | kiozen: a friend just tell me it work with the 8800 gts card, so .... |
| 07:55.55 | kiozen | ok? |
| 08:03.47 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfd094.pool.einsundeins.de) |
| 08:05.29 | *** join/#htc-linux TeringTu1y (n=maarten@195-241-125-243.ip.telfort.nl) |
| 08:22.38 | marbalon | for people interested in Kaiser http://forum.xda-developers.com/showthread.php?p=2138248#post2138248 |
| 08:22.59 | marbalon | new keyboard driver just release ;) |
| 08:53.52 | *** join/#htc-linux swc|666 (n=no@c66-235-54-27.sea2.cablespeed.com) |
| 08:53.59 | swc|666 | grrrrrrrrrrrrrrrr |
| 08:57.19 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 08:59.24 | cr2 | hi |
| 08:59.36 | cr2 | g++ -O3 does some strange things. |
| 09:05.23 | swc|666 | o? |
| 09:09.11 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 09:11.28 | BabelO_ | cr2: why did you use -O3 you don't want warning , ;) |
| 09:13.02 | BabelO_ | cr2: http://pastebin.ca/993030 |
| 09:19.10 | cr2 | BabelO: does it work ? |
| 09:19.36 | cr2 | hmm. something strange happens after this one. out = new char*[count+1]; |
| 09:20.49 | cr2 | tsdogs had count, not count+1, but i've fixed it and the plain C version works very well now. |
| 09:20.59 | cr2 | but c++ still crashes. |
| 09:25.00 | cr2 | BabelO_: what is the \t hex value ? |
| 09:32.43 | cr2 | ok, now i understand it |
| 09:33.45 | *** join/#htc-linux TeringTuby (n=maarten@195-241-125-243.ip.telfort.nl) |
| 09:57.20 | BabelO_ | cr2: don't know |
| 10:03.48 | BabelO_ | cr2: about the head.S to boot from SD diag card |
| 10:04.47 | BabelO_ | cr2: how can i check the bootloader load adress ? from the asm bootloader code |
| 10:04.50 | BabelO_ | ? |
| 10:22.04 | marbalon | Raven_coda: hi |
| 10:38.23 | dzo | hi marbalon, how's kaiser going. |
| 10:41.01 | marbalon | dzo: hi |
| 10:41.58 | *** join/#htc-linux cr2_ (n=konversa@crpl6.physik.uni-wuppertal.de) |
| 10:42.16 | dzo | hi, does the msm kernel still crash on android? |
| 10:42.37 | dzo | for kaiser, that is. |
| 10:43.22 | marbalon | dzo: boots ok, but after open some app hangs |
| 10:44.03 | dzo | Strange, works fine on vogue. |
| 10:44.42 | dzo | Have you disabled all the non-working drivers. |
| 10:45.13 | marbalon | dzo: what drivers do you mean? |
| 10:45.44 | dzo | stuff like adsp, hw3d, usb etc.. |
| 10:46.52 | marbalon | yes, only touchscreen and keyboard are enabled |
| 10:47.34 | dzo | I don;t think it will be memory, I can ssh to my phone with android running and there's at least 50M free, |
| 10:48.38 | marbalon | dzo: do you have usb working ? |
| 10:49.19 | dzo | No, through the radio. |
| 10:50.53 | dzo | SMD shouldn't be hard to get working for kaiser, somebody sent me a dump of shared ram and the buffers are fairly obvious. |
| 10:51.51 | dzo | Is it true you can't do mmutrace with haret though. |
| 10:54.35 | marbalon | dzo: the main problem is no datasheet for this CPU |
| 10:55.37 | marbalon | dzo: I thing it will be hard to write all drivers without specs |
| 10:56.26 | *** join/#htc-linux AlGe (n=alge@143.205.212.140) |
| 10:56.39 | dzo | Of course, but at least we have the android msm-code, the real problem is that all the rpc calls are completely undocumented and depend on the AMSS version. |
| 10:59.02 | marbalon | dzo: what is AMSS ? |
| 10:59.04 | dzo | We are actually very close, what I would like to know is if the android adsp lib will work with our hardware. |
| 11:00.20 | dzo | AMSS is the modem software that runs on the ARM9. It actually controls the real hardware. |
| 11:03.32 | infernix | oooh |
| 11:03.34 | infernix | marbalon: cool! |
| 11:03.57 | infernix | marbalon: this is against linux-msm right? |
| 11:04.01 | marbalon | do you have any datasheet for your processor ? |
| 11:04.07 | infernix | or is the patch for android-msm? |
| 11:04.18 | marbalon | infernix: android-msm |
| 11:04.23 | infernix | ok |
| 11:05.39 | infernix | i'm a bit confused now; what's the difference between the two trees |
| 11:06.17 | dzo | We have figured out most of the hardware differences with MSM7X00A, its just the ARM9 software left really. |
| 11:06.30 | *** join/#htc-linux cr2_ (n=konversa@crpl6.physik.uni-wuppertal.de) |
| 11:06.38 | infernix | there's kernel.git and linux-msm.git |
| 11:07.00 | dzo | the android-msm just has a few extra android specific drivers, binder etc.. not really necessary. |
| 11:07.46 | dzo | my patches will work with either tree |
| 11:08.16 | dzo | (branch, that is) |
| 11:09.23 | infernix | cloning kernel.git then :) |
| 11:12.44 | infernix | dzo: is arm9 the radio part of the phone? |
| 11:14.13 | dzo | yes |
| 11:14.19 | infernix | isn't that linux already? |
| 11:14.57 | infernix | i thought I read that radio roms are linux based |
| 11:15.04 | dzo | no, it runs L4 a nice little ukernel. |
| 11:15.29 | infernix | can't it be reverse engineered by picking apart the radio roms? |
| 11:15.50 | dzo | Yes, i'm sure it can. |
| 11:16.02 | dzo | lots of work though. |
| 11:17.56 | infernix | MSM chipset manuals only sell to large companies i guess? |
| 11:18.03 | infernix | or are they just insanely expensive |
| 11:20.01 | infernix | oh well, off to lunch. will play with the new driver later marbalon, thanks for the hard work :) |
| 11:20.06 | dzo | Qualcomm will only release documentation to people like HTC and Google, Swetland and SanMehat have it and are sworn to secrecy. |
| 11:24.31 | marbalon | dzo: I know that but I dot understand why qualcomm don't share data sheet witch other people (like ATMEL etc.) |
| 11:29.05 | nx5 | is it possible to set monitor mode on the HTC touch wireless nic? |
| 11:37.36 | cr2_ | nx5: it should be possible, but you need to do the sdio setup first, and to find out where are the acx100 control registers are mapped |
| 11:38.09 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9255.dip0.t-ipconnect.de) |
| 11:42.58 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 11:49.37 | marbalon | dzo: where do you get the android image? |
| 11:53.07 | cr2_ | dcordes: does it work for you http://forum.xda-developers.com/showthread.php?t=369754 |
| 12:13.58 | dzo | marbalon: From the emulator in the SDK. |
| 12:14.54 | kiozen | BabelO_: core 2 quad is fun :) |
| 12:23.03 | BabelO_ | kiozen: yes, do you recompile your own kernel with only stuff for smp |
| 12:23.14 | BabelO_ | kiozen: and did you use it as 32bit or 64 bit ? |
| 12:23.27 | kiozen | BabelO_: plain SuSE x64 |
| 12:23.34 | BabelO_ | kiozen: i can recompile the whole qtopia in 18mn on mine ;) |
| 12:23.47 | kiozen | have to that the next days |
| 12:23.58 | kiozen | would be more fun with device ;) |
| 12:24.12 | BabelO_ | kiozen: ah mine is 32bit only, did not want to try 64bit, because i see al problem that cr2 have and other guy too |
| 12:24.32 | kiozen | BabelO_: there are no real problems |
| 12:24.50 | kiozen | just some compiler wowes, due to /usr/lib |
| 12:24.55 | *** join/#htc-linux nx5_off (n=pocholo@84.78.40.245) |
| 12:36.06 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 12:45.25 | Marex | cr2_, hi |
| 12:59.54 | *** join/#htc-linux rob_w|laptop (n=rob@p549B9255.dip0.t-ipconnect.de) |
| 13:05.15 | *** join/#htc-linux patoche (n=patoche@77.197.38.63) |
| 13:10.51 | *** join/#htc-linux rmoravci1 (n=rmoravci@gtsgw.ttc.cz) |
| 13:28.04 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 13:36.08 | kiozen | cr2_: hehe, with 2560x1600 even gdal gets slow |
| 13:38.24 | *** join/#htc-linux kbingham (n=kbingham@cvs.mpc-ogw.co.uk) |
| 13:47.45 | cr2_ | kiozen: your card is probably too cheap :) |
| 13:57.04 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 14:12.16 | *** join/#htc-linux nx5_away (n=pocholo@84.78.40.245) |
| 14:56.40 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 15:16.09 | *** join/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
| 15:16.16 | *** part/#htc-linux noelcragg (n=noel@adsl-68-121-164-151.dsl.pltn13.pacbell.net) |
| 15:18.59 | dcordes | yawns |
| 15:20.05 | dcordes | cr2_, will try and enter OEMSBL later |
| 15:22.42 | *** join/#htc-linux patoche (n=root@lns-bzn-33-82-252-33-245.adsl.proxad.net) |
| 15:23.28 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 15:25.04 | Zoolooc | hi there |
| 15:25.49 | *** join/#htc-linux AlGe (n=alge@143.205.212.140) |
| 15:27.30 | Zoolooc | hey, once one gets busy with a new born baby boy, also interesting things happen in the Kaiser community: http://forum.xda-developers.com/showpost.php?p=2138248&postcount=226 |
| 15:28.03 | SanMehat | morning |
| 15:28.08 | Raven_coda | morning |
| 15:28.17 | SanMehat | Raven: havent gotten a chance to look at your patch yet |
| 15:28.26 | SanMehat | I've been busy with DMA support for SDCC |
| 15:28.31 | cr2_ | quoting the pistachio microkernel: "present-list fucked???" |
| 15:28.46 | Raven_coda | no, prob do you mind if I send you a new one then? Much cleaner |
| 15:29.25 | Raven_coda | prob won't be ready for another day or so though |
| 15:29.36 | SanMehat | Raven_coda: sure that would be great |
| 15:29.54 | SanMehat | Raven_coda: I'm doing cleanups for the next few days anyways |
| 15:30.20 | Raven_coda | K, this doesn't modofy clocks.c or gpio.c |
| 15:30.30 | Raven_coda | *modify |
| 15:31.28 | cr2_ | dcordes, Zoolooc, there are 3 operating environments on kaiser: QCT, HTC, pistachio. and the wince SPL+wince NK |
| 15:33.17 | cr2_ | the arm9 virtual mapping in pistachio is completely different, it's in the 0xf9* - 0xffe* range. |
| 15:44.57 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 15:45.39 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 15:45.54 | *** join/#htc-linux kiozen (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 15:48.17 | *** join/#htc-linux kiozen_ (n=oeichler@p54929CE8.dip0.t-ipconnect.de) |
| 15:55.23 | cr2_ | 464c457f |
| 15:55.52 | cr2_ | 7fELF |
| 16:01.07 | Raven_coda | dcordes, you around? |
| 16:30.28 | BabelO_ | apt: QLandkarte? |
| 16:30.29 | apt | qlandkarte is probably a portable software to view vector road maps in Gamin's *img format on any system. |
| 16:30.35 | BabelO_ | yesss |
| 16:31.46 | *** join/#htc-linux JohnnyK (n=johnnyk@nfx-nat-229.pilsfree.net) |
| 16:43.18 | ltxda | need help with a linux driver for an HTC Shift under BackTrack3beta. Anyone can help? |
| 16:44.14 | *** part/#htc-linux BabelO_ (n=fcr@unaffiliated/babelo) |
| 16:44.20 | ltxda | well if anyone is interested in helping, i created the BackTrack3b USB bootable stick and wanted to activate wifi on it for the toys. PM me if you guys can. |
| 16:48.35 | ltxda | ImCoKeMaN, no package yet??? |
| 16:57.00 | *** join/#htc-linux miknix (n=miknix@81.193.88.54) |
| 16:57.27 | *** join/#htc-linux CVirus (n=GoD@82.201.174.127) |
| 16:58.24 | *** join/#htc-linux gmelfe (n=gmelfe@193.137.97.146) |
| 17:01.59 | dcordes | Raven_coda, just pass him marbalon's new patch |
| 17:02.50 | *** join/#htc-linux tsdogs (n=tsdogs@net-84-18-144-39.c.bkom.it) |
| 17:04.38 | Raven_coda | marbalon patch has nothing cleaned |
| 17:04.52 | Raven_coda | it's just his mode on dzo's original stuff |
| 17:05.10 | Raven_coda | dzo's origianl stuff will break for msm7200A devices |
| 17:05.31 | Raven_coda | but, can you even build marbalon's patch and have keyboard work? |
| 17:05.45 | dcordes | Raven_coda, didn't have the time yet |
| 17:05.50 | dcordes | in half an hour I will |
| 17:05.50 | Raven_coda | I get same problem as before |
| 17:05.55 | dcordes | crap |
| 17:06.02 | dcordes | now he's off again |
| 17:06.09 | dcordes | I was hoping I could detail on SD |
| 17:06.15 | Raven_coda | seems he's the only one who can get his patch to work |
| 17:06.40 | dcordes | did you build against the android-msm branch? |
| 17:06.57 | Raven_coda | no, the most recent msm |
| 17:07.05 | Raven_coda | as he says to do in the post |
| 17:07.11 | dcordes | well try to branch android-msm and then try again |
| 17:07.32 | cr2_ | dcordes: keisermemorymap updated |
| 17:07.46 | Raven_coda | cr2 what changed? |
| 17:07.55 | dcordes | reading the log from today it looked like he builds again android-msm |
| 17:08.00 | cr2_ | microkernel mapping |
| 17:08.20 | dcordes | cr2_, great |
| 17:08.21 | cr2_ | it maps much less, but also some other areas. |
| 17:09.16 | dcordes | cr2_, shall I still try and enter the 'radio firmware bootloader' ? |
| 17:09.16 | cr2_ | now you need some detailed study of the gpio control. |
| 17:09.43 | cr2_ | it's some mess made of thumb code. |
| 17:10.21 | cr2_ | unlike the microkernel which is a normal elf file |
| 17:10.53 | dcordes | cr2_, I thought the pistachhio was uber secret and completely locked down? |
| 17:11.03 | cr2_ | you may also check the links provided by wireddd |
| 17:11.28 | cr2_ | maybe, i don't know ;) |
| 17:11.53 | dcordes | you're da man :D |
| 17:12.50 | cr2_ | but it may be like the pxa27x watchdog |
| 17:13.10 | cr2_ | once started, needs a reboot to stop |
| 17:13.49 | BabelO | cr2_: oh |
| 17:14.02 | BabelO | cr2_: i did not see your question this afternoon about pastebin |
| 17:14.22 | BabelO | cr2_: no, it ddoes not work, i ve to trace inside with something |
| 17:19.02 | dcordes | cr2_, the pistacchio can't be stopped w/o reboot? |
| 17:20.03 | tsdogs | cr2_: what was the thing with count+1? hi btw |
| 17:20.21 | tsdogs | BabelO: news on qvoice or smplayer ? |
| 17:21.28 | cr2_ | tsdogs: hi. i've provided it with ' ' as separator, and a lot of nasty things happened |
| 17:21.52 | BabelO | tsdogs: oh, good question, the guy just come back, i ll send a mail to him tomorrow |
| 17:21.59 | tsdogs | hmm, that's strange, it was the way i tested it I think |
| 17:22.04 | tsdogs | BabelO: ok :) |
| 17:22.10 | BabelO | tsdogs: smplayer, no i wait for 4.4 |
| 17:22.31 | tsdogs | yes new multimedia there |
| 17:23.19 | tsdogs | hmm, cr2_ yes it does that for me too :( |
| 17:23.37 | tsdogs | strange valgrind did not complain ... |
| 17:23.58 | cr2_ | tsdogs: valgrind created a lot of weird messages |
| 17:24.04 | tsdogs | ho |
| 17:24.10 | cr2_ | i used efence |
| 17:24.16 | tsdogs | I thought it was valgind clean := |
| 17:24.17 | tsdogs | :) |
| 17:24.21 | cr2_ | and found the exact place for the crash |
| 17:24.36 | cr2_ | then i used printf :) |
| 17:24.42 | tsdogs | lol |
| 17:25.20 | cr2_ | i've written an .mp parser with it. |
| 17:25.48 | tsdogs | :) |
| 17:26.06 | cr2_ | valgrind is going crazy with such amount of alloc/dealloc |
| 17:26.14 | tsdogs | lol |
| 17:26.15 | cr2_ | on a 500MB .mp file |
| 17:27.24 | tsdogs | cr2_: I'm curios where is the error? |
| 17:28.40 | cr2_ | count is too small |
| 17:29.02 | cr2_ | and there is another problem with (\r)\n for the last token. |
| 17:29.03 | tsdogs | hmm, yes 'cause it's stripping the whitespaces... |
| 17:30.04 | dcordes | <cr2_> dcordes: does it work for you http://forum.xda-developers.com/showthread.php?t=369754 <-- does not work for me. |
| 17:30.04 | cr2_ | it should reduce the double whitespaces like in s/ / /g |
| 17:30.44 | tsdogs | cr2_: ok, it's doing like that (I think, but the problem is that it uses that code to calculate the number of the resulting strings) |
| 17:31.09 | dcordes | cr2_, it does normally boot wen I power on with the method described in the forum. looks like I have a non service unlocked device |
| 17:31.11 | cr2_ | tsdogs: btw, ' ' as a separator was not in an .mp file. i've just wanted to use it to parse a config file. now i'm thinking about doing config in xml |
| 17:31.27 | tsdogs | cr2_: I've fixed the problem :) |
| 17:31.31 | cr2_ | dcordes: ok |
| 17:31.41 | tsdogs | at least I think |
| 17:32.00 | cr2_ | tsdogs: i have C and c++ versions now. and some different versions :) |
| 17:32.09 | cr2_ | need to unify all them. |
| 17:32.21 | tsdogs | put this at line after the first whitespace=1; |
| 17:32.22 | tsdogs | <PROTECTED> |
| 17:32.22 | tsdogs | <PROTECTED> |
| 17:32.28 | dcordes | cr2_, to get straight forward, what's the first step to study the gpios? |
| 17:32.33 | tsdogs | lol |
| 17:32.55 | cr2_ | tsdogs: is there some qt4 xml config editor ? |
| 17:32.55 | tsdogs | cr2_: should we put that code in cvs? |
| 17:33.11 | tsdogs | cr2_: I think so, at least a parser afair |
| 17:33.18 | cr2_ | tsdogs: yes, i think as buildmap_utils.c |
| 17:33.24 | tsdogs | I saw something in the openrpt code... |
| 17:33.41 | tsdogs | let me check |
| 17:33.43 | dcordes | BabelO, said there is an editor for the configs in qtopia SDK |
| 17:33.48 | cr2_ | tsdogs: then it can be used for buildus too. |
| 17:34.00 | cr2_ | BabelO: are you alredy sleeping ? |
| 17:34.34 | tsdogs | cr2_: QDomElement |
| 17:34.56 | BabelO | cr2_: no :) |
| 17:35.01 | cr2_ | lol |
| 17:35.03 | BabelO | tsdogs: editor for what ? |
| 17:35.13 | cr2_ | config for a program |
| 17:35.28 | cr2_ | now it's a key = val style stuff |
| 17:35.46 | BabelO | cr2_: ah yes it is qtopia standard :) |
| 17:35.53 | BabelO | and qt standard |
| 17:35.55 | tsdogs | cr2_: xml parsing can be very triky |
| 17:36.08 | cr2_ | but i need some grouping support, and maybe matrix edit/entry for 'val' |
| 17:36.09 | tsdogs | cr2_: u meant a configuration editor app? |
| 17:36.15 | cr2_ | yes. |
| 17:36.29 | tsdogs | hmm, I need to google for that... |
| 17:36.31 | BabelO | cr2_, tsdogsit is QSettings |
| 17:36.54 | BabelO | s/tsdogsit/tsdogs it/ |
| 17:36.54 | cr2_ | need to do something for my job too, and free some time for hacking :) |
| 17:37.01 | tsdogs | BabelO: QSettings is for ini style afair... |
| 17:37.12 | *** join/#htc-linux Serega (n=chatzill@195.230.103.1) |
| 17:37.17 | BabelO | tsdogs: yes key=value |
| 17:37.23 | Serega | hi there! |
| 17:37.38 | tsdogs | http://kxmleditor.sourceforge.net/ |
| 17:37.48 | BabelO | else like you say it is ok QDOM, but better is to have XPath have a speed search in XML |
| 17:37.59 | tsdogs | hmm xerces |
| 17:38.16 | BabelO | i read somewhere that qt 4.4 have xml parser somewhere |
| 17:38.17 | cr2_ | tsdogs: interesting. |
| 17:38.31 | tsdogs | http://lists.trolltech.com/qt-interest/2004-04/thread01206-0.html |
| 17:38.42 | cr2_ | BabelO: yes, but it's slow compared to expat. and libxml2 too. |
| 17:39.05 | BabelO | cr2_: XPath slow ? |
| 17:39.25 | cr2_ | at least for the multimegabyte .gpx files in qgis it was slow, and was rewritten. |
| 17:39.55 | BabelO | cr2_: ok maybe, i never go behing 10Mb |
| 17:40.07 | tsdogs | cr2_: xml is good for exchanging data but parsing is a pita :) |
| 17:40.41 | tsdogs | http://www.kde-apps.org/content/show.php?content=21781 |
| 17:40.53 | BabelO | tsdogs: xml parsing is fast if you use the correct parser ;), but agree with you dom is not for thzat |
| 17:41.09 | cr2_ | tsdogs: raw qt is better. |
| 17:41.15 | tsdogs | lol |
| 17:41.42 | cr2_ | btw, i have a qt2 app here, ported to qt3 |
| 17:42.02 | cr2_ | now it does not want to compile with qt4 |
| 17:42.24 | cr2_ | because of the missing <qt*.h> headers |
| 17:42.35 | tsdogs | cr2_: send me the code, I'm an expert now on that task :) |
| 17:42.44 | BabelO | lol |
| 17:42.52 | cr2_ | but uses only the barebones widgets :) |
| 17:42.54 | BabelO | tsdogs: yes you are very fast |
| 17:42.58 | cr2_ | ok :) thanks. |
| 17:43.40 | tsdogs | cr2_: qt*.h should be there, they only changed a few widget names and includes (and also had many widget properties changes :) |
| 17:44.19 | cr2_ | not all. |
| 17:44.25 | cr2_ | of them |
| 17:44.37 | tsdogs | BabelO: fast != good :) |
| 17:44.52 | BabelO | tsdogs: games work perfect :) |
| 17:44.55 | tsdogs | cr2_: of course with widget they changed the includes |
| 17:45.09 | *** join/#htc-linux gmelfe_ (n=gmelfe@193.137.97.157) |
| 17:45.49 | tsdogs | lol, there is one thing I need to fix, I also have the new version of qnetwalk to port, though I wanted to keep original compatibility insthead of breaking it |
| 17:46.12 | cr2_ | i don't like the new </FooBar/QtWeIrDnEwStYlE> |
| 17:46.36 | tsdogs | cr2_: you can still use the old way I think... |
| 17:46.56 | tsdogs | if you look into them they are only stubs that include the real ones |
| 17:47.22 | cr2_ | hmm. where is the latest version... |
| 17:47.24 | tsdogs | I think they needed it for cross platform (?) |
| 17:47.32 | tsdogs | cr2_: of what? |
| 17:47.59 | cr2_ | of this program. |
| 17:48.06 | cr2_ | qt2/3 |
| 17:48.28 | cr2_ | it was written by a student here in 2002 i think :) |
| 17:48.36 | cr2_ | a very simple data viewer. |
| 17:48.54 | tsdogs | :) |
| 17:49.08 | cr2_ | viewer-2.1.1.tar.bz2 |
| 17:49.12 | cr2_ | no, not this one. |
| 17:50.20 | cr2_ | view233-1.tar |
| 17:50.23 | cr2_ | looks better. |
| 17:52.09 | cr2_ | hehe. need to clean some junk away. |
| 17:53.21 | cr2_ | 2001 |
| 17:56.08 | cr2_ | nice stoneage program |
| 17:56.54 | tsdogs | lol |
| 17:58.02 | cr2_ | sent |
| 17:58.47 | tsdogs | cr2_: tx looks funny but it probably does the work :), kxml is "abandoned"..., but maybe it's stable (interface looks more usable though) |
| 18:00.10 | tsdogs | hmm, either it's big or you've been greylisted :) |
| 18:00.39 | cr2_ | 163K |
| 18:01.23 | tsdogs | greylisted :) |
| 18:01.54 | *** join/#htc-linux nx5_off (n=pocholo@84.78.40.245) |
| 18:02.22 | tsdogs | ok now no more greylisting for you :) |
| 18:02.22 | cr2_ | Deferred: 450 4.2.0 |
| 18:02.35 | tsdogs | just requeue it |
| 18:03.03 | cr2_ | <PROTECTED> |
| 18:03.28 | cr2_ | ok. |
| 18:03.38 | tsdogs | ok got it :) |
| 18:03.42 | cr2_ | sendmail -q |
| 18:05.29 | tsdogs | cr2_: is this an attempted port or the qt3 version? |
| 18:06.17 | tsdogs | qwt? grace? xmgrace? |
| 18:06.32 | *** join/#htc-linux marbalon (n=balon@aegg191.neoplus.adsl.tpnet.pl) |
| 18:06.51 | cr2_ | comment out. |
| 18:06.54 | tsdogs | ok I need qwt |
| 18:07.03 | cr2_ | were some wild hacks. |
| 18:07.05 | *** join/#htc-linux gmelfe (n=gmelfe@193.137.97.151) |
| 18:07.09 | tsdogs | ok |
| 18:07.13 | cr2_ | xmgrace actually worked. |
| 18:07.21 | tsdogs | is it the qt3 version ? |
| 18:07.27 | cr2_ | qwt was not really finished. |
| 18:07.28 | cr2_ | yes. |
| 18:08.26 | tsdogs | ok, I'll have a look, hope u don't need it for tomorrow :) |
| 18:09.36 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 18:10.06 | cr2_ | no |
| 18:10.37 | cr2_ | but it's so simple that i don't think there will be any problems. |
| 18:11.13 | tsdogs | well I need either the dependencies or to comment out every reference to them :) |
| 18:11.34 | tsdogs | hmm, I think i'll go for installing the qwt |
| 18:11.49 | tsdogs | it's interesting anyway |
| 18:12.45 | cr2_ | ok |
| 18:17.14 | tsdogs | hmm new version of qwt does not have QwtDiMap ... |
| 18:26.48 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 18:39.21 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
| 18:49.51 | tsdogs | cr2_: hmm segfault with qt-3.3.8b |
| 18:51.27 | tsdogs | lol, it linked against some qt4 libs :) |
| 18:57.22 | tsdogs | cr2_: what should I feed it with? |
| 19:00.36 | cr2_ | hmm. |
| 19:00.48 | cr2_ | special .nc , .sel |
| 19:00.58 | cr2_ | i think .xyz should work too |
| 19:01.22 | cr2_ | put some 'x y z' values into file.xyz |
| 19:01.26 | tsdogs | cr2_: ok, gg now, bbl at least qt3 builded, now will port to qt4 :) |
| 19:01.32 | tsdogs | ok I'll try it :) |
| 19:01.58 | tsdogs | cya |
| 19:02.11 | Raven_coda | marbalon, you around? |
| 19:02.22 | marbalon | yes |
| 19:02.49 | marbalon | I run some apps in android !!! |
| 19:02.49 | Raven_coda | I can't get your keyboard driver to work when I build kerenel |
| 19:02.57 | Raven_coda | Really !! that's great! |
| 19:02.58 | Raven_coda | how |
| 19:03.00 | *** join/#htc-linux lukas_ (n=lukas@f048041015.adsl.alicedsl.de) |
| 19:03.10 | dcordes | hi marbalon |
| 19:03.15 | Raven_coda | kernel builds but locks atfer I press a key |
| 19:04.01 | Raven_coda | same prob I have with previous keyboard driver |
| 19:04.15 | marbalon | Raven_coda: I have no idea why |
| 19:04.19 | marbalon | dcordes: hi |
| 19:04.34 | Raven_coda | dcordes can you try a build kernel |
| 19:04.53 | dcordes | ok I will checkout git.android.com/kernel branch=android-msm |
| 19:05.09 | Raven_coda | marbalon what did you to to get apps to run? |
| 19:05.15 | marbalon | what branch off linux-msm are you using ? |
| 19:05.29 | Raven_coda | most recent msm |
| 19:06.10 | Raven_coda | HEAD at usb_function: ether: add cdc_subset .... |
| 19:06.12 | marbalon | http://forum.xda-developers.com/showthread.php?p=2139818#post2139818 |
| 19:06.14 | dcordes | Raven_coda, , do "git-branch" inside kernel dir |
| 19:06.28 | dcordes | what does it say? |
| 19:07.01 | Raven_coda | msm-2.6.24 |
| 19:07.14 | dcordes | ok marbalon in which branch do you work? |
| 19:07.30 | marbalon | dcordes: android-msm |
| 19:07.42 | dcordes | see Raven_coda try it with android-msm branch |
| 19:09.30 | dcordes | Raven_coda, try this: git remote update && git checkout -b new-android-msm origin/android-msm && git branch -D android-msm |
| 19:10.18 | Raven_coda | are you still trying it too dcordes? |
| 19:10.35 | dcordes | Raven_coda, I'm doing a fresh clone right now |
| 19:11.28 | marbalon | I think you can use this snapshot http://git.android.com/?p=linux-msm.git;a=snapshot;h=a5391680a2d29647f7c4b2e1b471f3e0f2bdc9ca;sf=tgz |
| 19:12.22 | dcordes | marbalon, from when is it? |
| 19:13.15 | marbalon | it is described as "2 days ago Brian Swetland Merge branch 'msm-2.6.24' into android-msm " |
| 19:14.24 | dcordes | marbalon, is it required to select branch when downloading this tarball? |
| 19:14.55 | marbalon | no it is snapshot of android-msm branch |
| 19:16.02 | dcordes | ok I will try this |
| 19:18.08 | dcordes | marbalon, can you make < > | and stuff now with keyboard? |
| 19:19.32 | marbalon | dcordes: arrow keys ? |
| 19:19.48 | dcordes | no I mean extra signs |
| 19:22.17 | Raven_coda | marbalon, the initrd-android on your page is only 3MB |
| 19:22.57 | marbalon | sorry I upload it now |
| 19:23.02 | Raven_coda | thx |
| 19:23.32 | dcordes | marbalon, building |
| 19:23.45 | Raven_coda | marbalon, It's nice to see the work you've done on this |
| 19:24.01 | dcordes | yea |
| 19:24.14 | Raven_coda | I'm compiling a diff to send to San, maybe it can become part of main repo |
| 19:24.54 | Raven_coda | but it is against most recent msm branch so I hope we can get your keyboard driver working with that branch |
| 19:29.44 | dcordes | oh no messed up microsd fielsystem |
| 19:32.13 | Raven_coda | dcordes, your image did? |
| 19:32.22 | dcordes | lol no |
| 19:32.28 | dcordes | not unmounting did |
| 19:32.33 | dcordes | damn old gnome automounter |
| 19:33.23 | *** join/#htc-linux _who (i=who@194.145.250.184) |
| 19:43.02 | dcordes | brb |
| 19:47.39 | marbalon | new initrd-android redy to download |
| 19:47.51 | Raven_coda | k, I'll try it |
| 19:49.21 | Raven_coda | marbalon, do you have an email address I can send you this cleaned patch |
| 19:49.40 | marbalon | Raven_coda: marcin@baliniak.pl |
| 19:51.10 | marbalon | Raven_coda: you port touchscreen driver to our device |
| 19:51.20 | marbalon | is there any way to debug it ? |
| 19:51.37 | Raven_coda | yeah, I had no test proggy |
| 19:51.48 | Raven_coda | so it prob needs calibration |
| 19:52.05 | *** join/#htc-linux dcordes (n=lukas@f048041015.adsl.alicedsl.de) |
| 19:52.17 | Raven_coda | The patch I'm sending you makes kaiser it's own entry |
| 19:52.26 | Raven_coda | so change MTYPE to 1553 |
| 19:52.29 | marbalon | I want to calibrate it via driver |
| 19:53.02 | Raven_coda | k |
| 19:53.39 | Raven_coda | hold on I'll tell you how |
| 19:54.32 | Raven_coda | aprox lines 310 |
| 19:54.36 | Raven_coda | and 311 |
| 19:54.48 | Raven_coda | sets bounds |
| 19:55.37 | Raven_coda | set_abs_params(data->idev,ABS_X,min_x,Max_x, r1, r2); |
| 19:55.47 | marbalon | ok I will try it. |
| 19:55.49 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1fb1b.pool.einsundeins.de) |
| 19:55.51 | Raven_coda | r1 & r2 deal with rotational skew |
| 19:56.03 | Raven_coda | not sure of the math for them |
| 19:56.45 | marbalon | I recive you patch, for what branch it is ? |
| 19:57.19 | Raven_coda | http://git.android.com/?p=kernel.git;a=snapshot;h=71091c76c6d4a91bdf0df6ffd642336c86993eb0;sf=tgz |
| 19:57.43 | Raven_coda | msm.2.6.24 |
| 19:57.50 | dcordes | Raven_coda, marbalon it works. I built against latest git with branch=android-msm |
| 19:57.58 | dcordes | have keyboard working |
| 19:57.59 | Raven_coda | more then one key? |
| 19:58.18 | marbalon | under gui ? |
| 19:58.23 | dcordes | no I'm first in box |
| 19:58.34 | dcordes | every fn key works marbalon great work!! |
| 19:58.53 | dcordes | will try with gui |
| 19:59.36 | Raven_coda | good to hear, marbalon your new code is in my patch |
| 19:59.43 | Raven_coda | but not working for me |
| 19:59.49 | marbalon | there is no hangs under gui after pressing any keys |
| 20:00.07 | dcordes | Raven_coda, maybe it's the board-kaiser thingy then which messes things up? |
| 20:00.21 | Raven_coda | could be |
| 20:00.32 | marbalon | Raven_coda: what is diffrences between my patch ? |
| 20:00.43 | *** join/#htc-linux surgex0 (i=surge@pool-71-251-163-113.bflony.east.verizon.net) |
| 20:00.43 | Raven_coda | lot |
| 20:00.53 | marbalon | you try other drivers ? |
| 20:01.05 | Raven_coda | which other drivers> |
| 20:01.06 | Raven_coda | ? |
| 20:01.25 | dcordes | marbalon, he has board-kaiser. that's the difference |
| 20:01.47 | Raven_coda | and config is no longer for just vogue |
| 20:01.54 | Raven_coda | config_MSM7200 |
| 20:02.02 | Raven_coda | both vogue and kaiser depend on that |
| 20:02.18 | Raven_coda | all dzo changes are wrapped so not to break msm7200A |
| 20:02.33 | Raven_coda | and all dzo's stuff that was only for debugging is removed |
| 20:02.57 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
| 20:03.12 | dcordes | hello AlGe |
| 20:04.17 | BabelO | hey kiozenthe fast man of the west now :) |
| 20:04.58 | Raven_coda | marbalon, when debuging ts it help to have I2C_DEBUG_BUS checked in config |
| 20:08.18 | dcordes | marbalon, is 11,1M right size of initrd-android? |
| 20:08.41 | marbalon | no 23 |
| 20:08.45 | dcordes | oops |
| 20:09.04 | kiozen | BabelO: not now, the pc is in the office :) |
| 20:09.21 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 20:10.12 | dcordes | fastest crosscompiller? |
| 20:10.35 | Raven_coda | marbalon, your new initrd works great for me! |
| 20:11.07 | pikapika | hi |
| 20:12.13 | *** join/#htc-linux gmelfe (n=gmelfe@62.28.33.188) |
| 20:12.50 | dcordes | hi pikapika |
| 20:14.06 | BabelO | kiozen: ah ah, my office computer is not so fast, you are lucky :) |
| 20:14.50 | kiozen | BabelO: well I can control that on my own but I have to pay it :) |
| 20:15.08 | kiozen | and current project takes too long too compile |
| 20:15.18 | kiozen | now it's < 1min |
| 20:15.40 | dcordes | kiozen, what's your workplace's buildmachine? |
| 20:15.56 | kiozen | a core2 quad with 4GB now |
| 20:16.02 | dcordes | sweeet |
| 20:16.19 | kiozen | the 30'' TFT is the real nice thing |
| 20:16.28 | dcordes | I have that / 2. core2 duo with 2gb :) |
| 20:16.34 | kiozen | my eyes get really bad lately |
| 20:17.07 | kiozen | "2. core2 duo with 2gb" yes that is my laptop |
| 20:17.49 | marbalon | Raven_coda: I need to open input0 (touchscreen) device under console to get info from printk, any ideas ? |
| 20:17.51 | dcordes | marbalon, hm hm boot problem with initrd-android |
| 20:17.53 | kiozen | cr2_: any break thru resuming the N560? Or are you still lost in pointer arithmetic :) |
| 20:19.39 | marbalon | dcordes: I don't know sometimes its works, sometimes not, now i run haret just after reset and works, without copying |
| 20:20.02 | dcordes | hm I also did the copy trick. doesn't work. linuxbog works great though |
| 20:20.33 | dcordes | marbalon, how long doe sit take from 100% until you see booting? |
| 20:20.47 | dcordes | (with initrd-android= |
| 20:21.19 | Raven_coda | I have a printk in there already |
| 20:21.42 | Raven_coda | just enable i2C_debug_bus |
| 20:21.45 | Raven_coda | in config |
| 20:22.02 | Raven_coda | then when you touch with pen it will write x,y values to screen |
| 20:22.18 | marbalon | Raven_coda: ok, i will try |
| 20:22.36 | Raven_coda | you may want to modify line 244 in kaiser-ts |
| 20:22.45 | Raven_coda | so that it doesn't spam you with info |
| 20:23.04 | Raven_coda | schedule_timeout_int.... |
| 20:23.28 | marbalon | dcordes: about 30 sec |
| 20:23.34 | Raven_coda | change from 30 to 1000 or so, just so it doesn't print a new line as often |
| 20:24.05 | cr2_ | kiozen: no breakthrough yet. |
| 20:24.11 | Raven_coda | I just played with it in android a boy does it need some calibtation |
| 20:24.22 | Raven_coda | *calibration |
| 20:24.35 | kiozen | cr2_: with the pointers or the resume :D |
| 20:24.55 | cr2_ | the pointers are solved. |
| 20:25.03 | dcordes | marbalon, Raven_coda are you trying to get a calibration? |
| 20:25.24 | dcordes | I don't know if this helps. It is for x but maybe the code is useful http://webcvs.freedesktop.org/xlibs/XCalibrate/xcalibrate.c?revision=1.1.1.1&view=markup |
| 20:25.26 | cr2_ | kiozen: i do lcd resume, i.e. lcd spi first |
| 20:25.49 | kiozen | cr2_: isn't that the last thing remaining? |
| 20:25.56 | marbalon | dcordes: under gui ? i can't find this option |
| 20:26.26 | Raven_coda | thx dcordes that may help, I'll have to look over how to use it |
| 20:26.53 | dcordes | gpe openmoko and friends use it to calibrate |
| 20:27.07 | dcordes | marbalon, no I wonder what you want with touchscreen |
| 20:28.07 | dcordes | marbalon, I'm in android-initrd now with own kernel (did not wait long enough :) |
| 20:29.13 | marbalon | dcordes: i wont to make it more precise in driver |
| 20:29.15 | dcordes | I bet dzo could help us calibrating easily |
| 20:29.29 | dcordes | marbalon, ok. I though problem was userland |
| 20:29.44 | Raven_coda | dzo just took default |
| 20:29.52 | Raven_coda | but that didn't work for kaiser |
| 20:30.00 | cr2_ | kiozen: mainly, yes |
| 20:30.07 | dcordes | ok vogue really seems more similar to the git from many sides |
| 20:30.16 | Raven_coda | also kaiser doesn't read pressure the same way vogue does |
| 20:30.38 | dcordes | is pressure 0/1 or is it sensitive? |
| 20:30.58 | Raven_coda | in kaiser there is no direct pressure reading |
| 20:31.12 | Raven_coda | I had to do a function accross Z1 & Z2 |
| 20:31.32 | dcordes | is it possible to navigate with keybaord inside android userland? |
| 20:31.38 | Raven_coda | it's not quite right ether but it works |
| 20:31.41 | dcordes | I'm stuck in "Contact" |
| 20:32.05 | marbalon | Raven_coda: i've enabled I2C_DEBUG_BUS but no messages on console |
| 20:32.33 | Raven_coda | marbalon, hold on |
| 20:40.00 | Raven_coda | marbalon do you have INPUT_EVBUG on too |
| 20:40.11 | Raven_coda | I think you need that as well |
| 20:41.04 | *** join/#htc-linux kiozen_ (n=kiozen@rgnb-4db1db8b.pool.einsundeins.de) |
| 20:42.17 | *** join/#htc-linux gmelfe_ (n=gmelfe@62.28.33.188) |
| 20:43.10 | Raven_coda | having those checked works for me |
| 20:43.11 | cr2_ | kiozen_: btw, have i sent you the ozi converter ? |
| 20:43.20 | kiozen_ | cr2_: nope |
| 20:43.33 | *** join/#htc-linux dcordes1 (n=lukas@f048035228.adsl.alicedsl.de) |
| 20:44.39 | marbalon | Raven_coda: ok thanks works now |
| 20:45.09 | Raven_coda | Will you tell me what your reads in the four corners |
| 20:45.30 | Raven_coda | I wonder if mine is just messed up cause I've dropped it once or twice :( |
| 20:45.52 | Raven_coda | the top two I'm most curious about |
| 20:49.49 | dcordes1 | how can I close an app in android? |
| 20:50.15 | dcordes1 | did you check "3d transition" ? |
| 20:50.21 | marbalon | Raven_coda: input_set_abs_params(data->idev, ABS_X, 447, 3807, 0, 0); |
| 20:50.22 | marbalon | input_set_abs_params(data->idev, ABS_Y, 2832, 3728, 0, 0); |
| 20:51.55 | marbalon | dcordes1: in demos ? |
| 20:52.00 | Raven_coda | marbalon, but when I touch top right corner my y goes clean down to 2200 |
| 20:52.01 | dcordes1 | yep |
| 20:52.34 | Raven_coda | sorry, top left corner |
| 20:52.55 | marbalon | dcordes1: only picture without animations |
| 20:53.22 | dcordes1 | yes but I like the smooth motion w/o hardware accerlation |
| 20:53.50 | marbalon | Raven_coda: for my x and y ranges are diferent |
| 20:53.52 | dcordes1 | seems damn quick vs. qt/gtk.. but it plays in a differnt class |
| 20:54.10 | marbalon | Raven_coda: lunching android and testing... |
| 20:54.20 | dcordes1 | marbalon, is android started as root? |
| 20:55.31 | dcordes1 | maybe we can have us a terminal easily |
| 20:57.41 | marbalon | i give up today... se you tomorrow |
| 20:57.58 | *** join/#htc-linux kiozen_ (n=kiozen@rgnb-4db1df62.pool.einsundeins.de) |
| 20:58.00 | Raven_coda | night |
| 20:59.00 | cr2_ | kiozen: it parses gcps, but not the datum and projection |
| 20:59.26 | cr2_ | kiozen: but it's easier to do it with qt4 anyway. the program is in C |
| 21:21.11 | Raven_coda | dcordes what toolchain do you use? |
| 21:21.54 | dcordes1 | Raven_coda, angstrom-linux-gnueabi |
| 21:28.56 | dcordes1 | Raven_coda, arm-angstrom-linux-gnueabi- |
| 21:29.25 | *** join/#htc-linux AlGe (n=alge@143.205.212.140) |
| 21:30.24 | dcordes1 | Raven_coda, I can bzip2 zip and send you |
| 21:33.10 | Raven_coda | that's okay, I'll just have gentoo make me one |
| 21:34.30 | Raven_coda | I'm using armv6-none-linux-gnueabi |
| 21:34.39 | Raven_coda | It think the v6 is messing me up |
| 21:36.39 | dcordes1 | why should it. kaiser is v6 |
| 21:36.43 | BabelO | cr2_: wizard / artemis touchscreen is on good way :) |
| 21:36.51 | dcordes1 | I think my toolchain was also built for armv6 |
| 21:37.15 | dcordes1 | the one which I used now. but before I sure built with one which was made for my zaurus which is armv5 |
| 21:37.17 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
| 21:37.56 | Raven_coda | that's what I though but using the android-msm repo with marbalon changes I get compil errors |
| 21:38.27 | dcordes1 | Raven_coda, I will have you a script of what I did. |
| 21:39.32 | Raven_coda | I get error: bad value (armv5t) for march= switch |
| 21:40.13 | Raven_coda | wiat |
| 21:40.26 | Raven_coda | I found my typo |
| 21:40.30 | cr2_ | BabelO: your spi driver works ? |
| 21:40.58 | BabelO | cr2_: register are now known |
| 21:41.31 | BabelO | cr2_: just looking why wince send 0xc000 instead of 0xc300 according to tsc2046_ts.c driver |
| 21:41.53 | dcordes1 | raph_ael, http://pastebin.ca/993820 |
| 21:42.00 | dcordes1 | sorry that was for Raven_coda |
| 21:43.04 | cr2_ | BabelO: the power bits ? |
| 21:43.25 | Raven_coda | I got it decordes but thanks |
| 21:43.27 | cr2_ | BabelO: it was the main problem with the nonlinearity on the universal 2 years ago |
| 21:43.58 | cr2_ | BabelO: you can set the bits 2 and 1 to enable power afair. |
| 21:44.03 | dcordes1 | Raven_coda, that's what I did and it boots. |
| 21:44.17 | Raven_coda | I'm building now |
| 21:44.21 | BabelO | cr2_: it tell me something yes but i don't remember what was |
| 21:44.26 | cr2_ | BabelO: what is tsc2046_ts.c ? |
| 21:44.27 | BabelO | cr2_: ah ah ok ;) |
| 21:44.43 | BabelO | cr2_: the driver in hh cvs |
| 21:44.57 | cr2_ | BabelO: you save power by not enabling them. but often is does not work. |
| 21:45.11 | BabelO | ok ;) |
| 21:45.11 | cr2_ | BabelO: there are devices with on bit 1 set |
| 21:45.31 | cr2_ | it depends on the ts panel design and many other params :) |
| 21:46.27 | BabelO | cr2_: ok |
| 21:47.53 | BabelO | cr2_: http://pastebin.com/d63f3e3f2 |
| 21:48.13 | BabelO | cr2_: start command seem to be 0x9000 in our case not the 0x8000 |
| 21:49.01 | Raven_coda | It works. So his patch works on the android-msm but not linux-msm |
| 21:49.15 | dcordes1 | great |
| 21:49.35 | Raven_coda | It's strange that matters |
| 21:49.59 | Raven_coda | his keyboard drivers looks pretty independent of android |
| 21:50.58 | dcordes1 | that's what I though. anyway the android extra changes can't do us no harm |
| 21:51.10 | dcordes1 | in the opposite. we need them in case we want to play |
| 21:51.22 | Raven_coda | k, then that's the branch I'm make my patch for |
| 21:51.28 | dcordes1 | good |
| 21:53.36 | cr2_ | BabelO: yes, universal sets both bits |
| 21:54.10 | cr2_ | BabelO: magician too. |
| 21:54.19 | BabelO | cr2_: ok good |
| 22:02.04 | dcordes1 | Raven_coda, can you tell me what the nature of an initrd is as opposed to a normal rootfs? |
| 22:05.44 | dcordes1 | ahh initrd is more or less normal rootfs. build rootfs with OE, compress it to cpio (initramfs) and it will work |
| 22:06.47 | *** join/#htc-linux nx5_away (n=pocholo@84.78.40.245) |
| 22:07.27 | Raven_coda | yep |
| 22:08.33 | BabelO | cr2_: still around |
| 22:09.02 | BabelO | cr2_: http://pastebin.com/d15402b53 0xa is the tx buffer of spi controller what is 0x6 ? |
| 22:09.03 | dcordes1 | Raven_coda, how would I cpio-pack the whole content of a folder? |
| 22:09.16 | dcordes1 | so that it is the real initrd stuff |
| 22:09.21 | Raven_coda | I have a script here, I'll send it to you |
| 22:09.30 | BabelO | cr2_: there is another register like 0x6 http://pastebin.com/d6dca8c6 |
| 22:09.31 | Raven_coda | dzo gave it to me |
| 22:09.41 | dcordes1 | Raven_coda, great thanks |
| 22:09.42 | BabelO | cr2_: was thinking one of them was a status bit |
| 22:10.07 | BabelO | cr2_: but it is not cleared after each command |
| 22:10.19 | BabelO | cr2_: is it a trigger bit to push data out ? |
| 22:12.04 | Raven_coda | sent, check your email |
| 22:14.00 | dcordes1 | Raven_coda, does it require /sbin/nash on my computer? |
| 22:14.13 | Raven_coda | not sure |
| 22:15.40 | Raven_coda | looking at it, I think so |
| 22:16.51 | dcordes1 | ubuntu/debian repos don't have it |
| 22:17.44 | dcordes1 | a google search reveal there are many people called Nash invovled in linux |
| 22:17.50 | cr2_ | BabelO: but you have the register description ? |
| 22:18.08 | BabelO | cr2_: nooo, just what i think :) |
| 22:18.15 | dcordes1 | Raven_coda, and there's a nash hsell |
| 22:18.22 | dcordes1 | s/hsell/shell/ |
| 22:18.23 | BabelO | 0xa is the tx 0xc is the rx |
| 22:19.22 | cr2_ | ok. |
| 22:20.01 | BabelO | cr2_: 0x2 0x8 0xe are some config register |
| 22:20.09 | cr2_ | BabelO: you can look at the spl code. the protocol is really primitive. |
| 22:20.45 | BabelO | cr2_: ok but ts not used in spl, i can just find init :( |
| 22:21.39 | dcordes1 | Raven_coda, where did you get nash? |
| 22:21.45 | dcordes1 | what's your distro |
| 22:23.01 | tsdogs | night |
| 22:23.15 | BabelO | good night tsdogs |
| 22:23.22 | Raven_coda | gentoo |
| 22:23.28 | Raven_coda | I just emerge |
| 22:24.00 | dcordes1 | Raven_coda, can you pass me the portage file or SRC_URI for that nash thing? |
| 22:25.58 | Raven_coda | I didn't have to do anything to get it |
| 22:25.58 | cr2_ | BabelO: 8C02BBEC |
| 22:26.40 | pikapika | dcordes1: http://gd.tuwien.ac.at/linuxcommand.org/man_pages/nash8.html |
| 22:26.41 | pikapika | ;) |
| 22:26.42 | Raven_coda | I have to be root |
| 22:27.05 | Raven_coda | just try and type nash (as root) |
| 22:33.24 | dcordes1 | pikapika, thanks but where can I get it? |
| 22:33.39 | dcordes1 | Raven_coda, no nash on my system |
| 22:33.42 | BabelO | cr2_: ok i see it |
| 22:33.53 | pikapika | dcordes1: there are rpms for redhat/fedora i think you can convert them with alien to deb package |
| 22:34.04 | dcordes1 | pikapika, any link? |
| 22:34.07 | BabelO | cr2_: i see also sirf code here :) |
| 22:34.52 | pikapika | dcordes1: http://rpmfind.net/linux/rpm2html/search.php?query=nash |
| 22:39.41 | Marex | cr2_, hi |
| 22:39.45 | Marex | cr2_, are you around ? |
| 22:40.51 | Marex | cr2_, damn :E~ |
| 22:41.13 | Marex | I managed to convince palmld bootloader to jump to some code at 0xa0200000 in qemu :) |
| 22:41.58 | Marex | I just explained the bootloader, that it was waken up from suspend to mem (RCSR 0x04) and PSPR 0x01 (any value != 0 is ok) |
| 22:42.12 | Marex | and i put the code at 0xa0200000 and traced process counter |
| 22:42.34 | dcordes1 | Raven_coda, how does the zImage know what do with initrd? |
| 22:42.44 | dcordes1 | (in case of android.eg; it has that a.sh) |
| 22:46.44 | dcordes1 | pikapika, installed from that rpm with alien nash responds "/sbin/nash: error while loading shared libraries: libdevmapper.so.1.02: cannot open shared object file: No such file or directory" although I have libdevmapper installed |
| 22:51.12 | pikapika | dcordes1: look in your /lib if you have libdevmapper.so something |
| 22:51.29 | pikapika | maybe it asks for an old lib and you can ln -s |
| 22:51.50 | pikapika | not very clean but works often |
| 22:51.55 | dcordes1 | pikapika, have /lib/libdevmapper.so.1.02.1 |
| 22:52.11 | dcordes1 | ok ln -s /lib/libdevmapper.so.1.02.1 /lib/libdevmapper.so.1.02 |
| 22:52.44 | pikapika | should work :) |
| 22:52.52 | miknix | damn! |
| 22:53.20 | miknix | failed to bootstrap gcc |
| 22:53.47 | BabelO | good night |
| 22:54.54 | dcordes1 | good night BabelO |
| 22:55.08 | miknix | BabelO, au revoir :) |
| 22:57.49 | dcordes1 | pikapika, looks like ubuntu/debian lacks almost everything nash depends on |
| 22:58.43 | pikapika | dcordes1: like ? |
| 22:59.59 | dcordes1 | I symlinked libdevmapper and something. now it asks for libdhcp and that's not present at all |
| 23:00.15 | dcordes1 | maybe I should think of switching to gentoo |
| 23:00.58 | dcordes1 | pikapika, do you know whether nash is necessarry to create an initrd? |
| 23:01.08 | dcordes1 | my rootfs already has a busybox |
| 23:03.14 | pikapika | mkinitramfs maybe is enough |
| 23:04.13 | pikapika | i wouldn't recommend switching to gentoo |
| 23:04.22 | pikapika | but that's a personnal feeling |
| 23:04.41 | miknix | pikapika, why? |
| 23:05.14 | miknix | it makes your life easier for building and cross-compiling |
| 23:05.28 | pikapika | miknix: i used it a lot on my desktop a few years ago till i had great problems and switched to bsd/debian |
| 23:05.30 | dcordes1 | stop didn't want to start a flame war |
| 23:05.36 | dcordes1 | ^^ |
| 23:05.45 | pikapika | dcordes1: no distro war ;) |
| 23:05.56 | miknix | yeah, no war |
| 23:06.13 | pikapika | miknix: and then i began working as sysadmin and maintaining gentoo systems was a real pain |
| 23:06.13 | dcordes1 | I will try it anyway so.. |
| 23:06.22 | miknix | thats true :) |
| 23:06.55 | miknix | but emerge and portage is wonderful to maintain embedded systems |
| 23:07.23 | pikapika | well i've never had to do so, i can't tell :) |
| 23:07.33 | miknix | ROOT="/usr/linwizard-tiny" linwizard-emerge dropbear -av |
| 23:07.34 | miknix | These are the packages that would be merged, in order: |
| 23:07.34 | miknix | Calculating dependencies... done! |
| 23:07.34 | miknix | [ebuild N ] sys-libs/zlib-1.2.3-r1 to /usr/linwizard-tiny/ 0 kB |
| 23:07.34 | miknix | [ebuild N ] net-misc/dropbear-0.49 to /usr/linwizard-tiny/ USE="minimal multicall savedconfig zlib -pam -static" 0 kB |
| 23:07.37 | miknix | just an example |
| 23:07.40 | pikapika | crosscompiling seems very nice and clean for netbsd as i saw |
| 23:08.09 | pikapika | but netbsd is not much a goal for htc ;) |
| 23:08.25 | miknix | that command above will check dependencies, cross-compile and install them on the target root :) |
| 23:08.57 | dcordes1 | pikapika, mkinitramfs was the hint I needed. MODULES=what do I set when all modules are inside the zImage? |
| 23:08.58 | pikapika | miknix: debootstrap for debian systems is very nice |
| 23:09.10 | miknix | :) never tried :) |
| 23:09.37 | pikapika | dcordes1: unfortunately i never used it, except automatically when building kernels |
| 23:10.53 | dcordes1 | pikapika, how do you get it automatically? |
| 23:11.08 | pikapika | dcordes1: man 8 mkinitramfs doesn't specify that modules should be set |
| 23:11.19 | pikapika | dcordes1: make-kpkg |
| 23:11.49 | pikapika | builds a kernel from source and build a deb with initrd |
| 23:12.35 | dcordes1 | I don't think that's what I'm out for |
| 23:13.26 | pikapika | dcordes1: http://splashy.alioth.debian.org/wiki/tips |
| 23:13.39 | pikapika | there is an example of use for mkinitramfs |
| 23:16.40 | dcordes1 | pikapika, ok I've got my cpio.gz of desired rootfs now |
| 23:17.30 | dcordes1 | pikapika, my rootfs has no sort of script inside / |
| 23:18.44 | pikapika | dcordes1: i'm afraid i don't know much more |
| 23:18.55 | pikapika | try #debian on irc.oftc.net |
| 23:19.15 | pikapika | or ubuntu on freenode if you have an ubuntu |
| 23:19.32 | dcordes1 | ok thx |
| 23:34.22 | dcordes1 | at least that shows up the usual system messages |
| 23:39.55 | pikapika | cool :) |
| 23:58.39 | *** join/#htc-linux ltxda0 (n=ltxda@unaffiliated/ltxda) |