01:28.13 | *** join/#htc-linux ltxda00 (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
01:38.49 | *** join/#htc-linux dcordes (n=snoopdog@unaffiliated/dcordes) |
01:41.33 | dcordes | Raven_coda, wow it's huge progress that dzo has the modem working on vogue |
01:44.22 | dcordes | SanMehat, you around? |
02:44.39 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-1712bda91196ccea) |
04:08.32 | swetland | blargh. |
04:11.21 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
05:57.06 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
07:29.02 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-fcac9a29b6ae2c7a) |
07:41.00 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
08:13.32 | *** join/#htc-linux rob_w (n=bob@Ma45a.m.pppool.de) |
08:19.12 | *** join/#htc-linux tsdogs (n=tsdogs@net-84-18-144-39.c.bkom.it) |
08:25.25 | *** join/#htc-linux CoKeSERO (n=me@pool-72-70-182-116.hrbgpa.fios.verizon.net) |
08:29.51 | *** join/#htc-linux hlbot (n=adm@iclem.net) [NETSPLIT VICTIM] |
08:30.12 | *** join/#htc-linux edison (i=oystein@homelien.no) |
08:42.14 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) [NETSPLIT VICTIM] |
08:44.14 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-2b0d1c96847f179c) |
09:20.59 | *** join/#htc-linux marbalon (n=balon@aegb157.neoplus.adsl.tpnet.pl) |
09:32.19 | *** join/#htc-linux marbalon (n=balon@aegb157.neoplus.adsl.tpnet.pl) |
10:33.59 | *** join/#htc-linux tsdogs (n=tsdogs@net-84-18-144-39.c.bkom.it) |
10:45.57 | *** join/#htc-linux Dinde (n=kayser@sur-internet.net) |
11:10.52 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1def0.pool.einsundeins.de) |
11:18.18 | *** join/#htc-linux patoche (n=root@lns-bzn-44-82-249-208-202.adsl.proxad.net) |
11:42.31 | *** join/#htc-linux dcordes (n=snoopdog@unaffiliated/dcordes) |
11:49.31 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
11:54.02 | dcordes | cr2, I tried to copy mmc init from board-halibut to board-vogue (which we use for kaiser) as you said yesterday- no success. could you help me with that? |
11:55.27 | *** join/#htc-linux Oktal (i=mat@cpc3-cmbg8-0-0-cust1018.cmbg.cable.ntl.com) |
11:55.32 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
11:58.24 | marbalon | dcordes: hi |
11:59.04 | *** join/#htc-linux pH5 (n=ph5@p5485F547.dip.t-dialin.net) |
11:59.50 | swetland | yawns. |
12:00.03 | BabelO | hi |
12:00.15 | marbalon | I'm still working on keyboard, but what is your problem? |
12:01.11 | dcordes | marbalon, I was trying to play with sd but driver is not initialized |
12:01.42 | BabelO | pH5: i try to get sound record working on BA and compare with old driver, but when i start arecord, it look for pcm0D0c and udev create pcm0D1c |
12:02.19 | marbalon | you build function like kaiser_init_mmc() ? |
12:02.50 | dcordes | marbalon, yes. I tried to put this into board-vogue.c (copied from halibut) |
12:03.02 | dcordes | I get errors compilling that |
12:04.06 | marbalon | dcordes: what errors ? |
12:05.03 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
12:07.49 | dcordes | marbalon, http://pastebin.com/m62e7df04 |
12:08.08 | dcordes | I guess I did complete crap to that c file :) |
12:09.03 | dcordes | http://pastebin.com/m6eeea7b9 that's board-vogue.c |
12:09.15 | pH5 | BabelO: hi, that's because you have two separate alsa devices for input and output. check arecord -l/-L and I think you can select the correct one with -D |
12:10.49 | BabelO | pH5: yes i ve tried, but can not pass correct device name, it seem it is empty when i cat /proc/asound/* |
12:10.51 | dcordes | pH5, hi pH5 I removed the inherit kernel line and changed the filename to nokernel-0.1.bb. now with bitbake -b it builds fine. but bitbake virtual/kernel still looks for 2.6.21 something |
12:11.26 | pH5 | dcordes: nokernel_0.1.bb. bitbake uses underscores to separate PN from PV |
12:11.28 | marbalon | dcordes: you call htcvogue_init_mmc(); before declaration, move mmc code above static void __init htcvogue_init(void) |
12:11.58 | swetland | looks at these patches for vogue |
12:12.15 | dcordes | swetland, the ones Raven_coda sent in to SanMehat ? |
12:12.21 | Marex | pH5, hi |
12:12.27 | Marex | pH5, have you checked my patch ? |
12:12.31 | dcordes | marbalon, ok I will try |
12:12.37 | swetland | http://it029000.massey.ac.nz/vogue/diffs |
12:14.02 | pH5 | hi Marex. yes, looks good to me. I hoped cr2 would have taken care of that ;) |
12:14.38 | dcordes | swetland, ah ok. those have support for modem in since yesterday. this doesn't work at all on kaiser. tried to boot and it froze |
12:14.47 | swetland | the smd stuff is even more different than I would have expected |
12:15.33 | dcordes | marbalon, zImage ready :) I only got warnings |
12:17.07 | swetland | lucky thing htc prefers the at channel over the rpc stuff |
12:17.23 | swetland | that's got to be massively easier to reverse engineer |
12:18.44 | dcordes | brb |
12:19.28 | *** join/#htc-linux dcordes (n=snoopdog@unaffiliated/dcordes) |
12:20.31 | Marex | pH5, hehe, ok :) |
12:22.10 | dcordes | marbalon, ok it tries to init sd now |
12:22.43 | marbalon | dcordes: .... but you have info about timeout |
12:22.46 | marbalon | ? |
12:23.20 | dcordes | a second |
12:25.35 | dcordes | hmm no. only mmc_wait_for_req mmc_wait_for_cmd mmc_send_relative_addr mmc_aatach_dio mmc_rescan run_workqeue worker_tthread kthread mmc0: error -84 whilst initialising SDIO card |
12:27.40 | dcordes | with a lot of numbers betweenj |
12:29.06 | marbalon | ok, give up for now but when I finish kbd driver I will try fix mmc driver again |
12:29.55 | dcordes | marbalon, did you get the same messages? |
12:30.25 | marbalon | no. I have only messages about timeout i transaction |
12:43.41 | dcordes | marbalon, hm maybe the timeout messages comes right after booting. SanMehat said the timout would appear a few ms after the first command |
12:44.33 | marbalon | dcordes: yes but i've got timeouts evry one seconds |
12:44.58 | dcordes | I only see the normal boot messages because no keyboard |
12:47.45 | dcordes | marbalon, it says something about irq exception at the beginning! |
12:48.11 | dcordes | __irq_svct __do_softirq from... |
12:53.14 | dcordes | marbalon, do you see CMD_TIMEOUT? |
12:59.08 | infernix | hi guys. |
12:59.42 | infernix | do we have a keyboard patch yet that applies to linux-msm git without crashing the kernel upon keyboard input? |
13:00.37 | infernix | im talking about the kaiser of course ;) |
13:01.07 | dcordes | hi infernix |
13:01.15 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1def0.pool.einsundeins.de) |
13:01.33 | infernix | hello |
13:09.48 | dcordes | pH5, with packages/linux/nokernel_0.1.bb still the same. can bitbake -b but virtual kernel still looks for 2.6.21. in kaiser.conf is PREFERRED_PROVIDER_virtual/kernel = "nokernel" |
13:11.29 | infernix | dcordes: bitbake is used to make an initrd out of the android userspace sdk? |
13:12.00 | dcordes | infernix, nope it's used by www.openembedded.org |
13:12.18 | dcordes | you can make an angstrom initrd out of the OE metadata with it ;-) |
13:12.43 | dcordes | or openmoko one |
13:13.25 | infernix | i see |
13:13.29 | dcordes | pH5, also tried PREFERRED_PROVIDER_virtual/kernel = "nokernel_0.1" |
13:13.34 | dcordes | it seems to ignore that line |
13:14.29 | infernix | well, a working kernel is needed first and foremost; userspace is far easier to deal with. i'll have a look at it together with marbalons zImage when i have some time |
13:14.53 | dcordes | infernix, with an angstrom zImage you get a more complete enviornment for testing things |
13:15.01 | dcordes | s/zImage/initrd/ |
13:15.17 | *** join/#htc-linux areq126 (i=PJIRCWeb@staticline22574.toya.net.pl) |
13:15.37 | dcordes | android doesn't even come with a busybox |
13:15.37 | infernix | yeah but without any means of external communication (serial over usb, wifi, or 3g) its too isolated to do real work for my taste |
13:15.56 | dcordes | wait for marbalon's new keyboard driver |
13:16.13 | dcordes | if I got him right it will bring us the fn keys |
13:16.25 | *** join/#htc-linux areq (n=areq@pld-linux/areq) |
13:16.27 | marbalon | dcordes: I have some progress ;) |
13:16.33 | infernix | dances |
13:17.02 | dcordes | marbalon, can you interact with the 'special' keys? |
13:17.18 | marbalon | yes ;) |
13:17.24 | dcordes | that's great |
13:17.47 | dcordes | the driver in your diff from forum doesn't work here. let me know if I can try something |
13:18.35 | marbalon | dcordes: what meens here ? git snapshot ? |
13:18.43 | marbalon | *means |
13:20.11 | dcordes | marbalon, yes on my local snapshot. when I build a zImage with it. |
13:20.30 | dcordes | it hangs for 10 minutes when you press a key :-( |
13:20.54 | marbalon | I'm working on 7 days old snapshot... |
13:21.41 | marbalon | but I think it is not a problem with keyboard... but maybe I'm wrong |
13:21.53 | dcordes | yes I don't think keyboard has changed |
13:22.23 | dcordes | marbalon, do you also work with the new driver in old tree? |
13:23.53 | marbalon | yes but when I finish I will update |
13:25.29 | marbalon | dcordes: can you help me? my english isn't so good so and I have a problem with find key code for some keys |
13:25.44 | marbalon | keycodes are in input.h |
13:26.11 | dcordes | marbalon, my english is ok but my C is.... |
13:26.16 | marbalon | '-' = KEY_MINUS, but '@' = ???? |
13:26.45 | dcordes | in mach-msm folder? |
13:27.20 | marbalon | include/linux.input.h |
13:29.50 | pH5 | marbalon: you have a separate key only for the '@' symbol? |
13:30.14 | marbalon | yes |
13:30.34 | marbalon | dcordes: Q = KEY_Q, @ = ??? |
13:30.37 | infernix | doesnt look like its in the include |
13:30.46 | infernix | should be something like KEY_AT but its not htere |
13:30.49 | dcordes | pH5, what's the code for @? |
13:31.06 | dcordes | marbalon, I can't find it either |
13:31.25 | pH5 | afaik there is none. this is the first time I heard of something like this, usually @ is something like fn+Q |
13:31.41 | infernix | it is FN+Q |
13:31.50 | infernix | same as ! is FN+w |
13:31.55 | pH5 | there is KEY_EMAIL, but this is for multimedia keyboards with a "start email client" key |
13:32.30 | dcordes | marbalon, so you have to make combination of fn + Q |
13:32.35 | infernix | xev reports 'keysym 0x40, at' |
13:32.50 | pH5 | what device are we talking about? |
13:32.54 | infernix | kaiser |
13:32.55 | dcordes | htckaiser |
13:33.04 | marbalon | hmm maybe 0x40, thanks |
13:33.13 | pH5 | wait, but that one has @ the at symbol on the Q key, doesn't it? |
13:33.20 | infernix | marbalon: no, apostrophe is not @ |
13:33.23 | dcordes | pH5, right |
13:33.30 | infernix | marbalon: apostrophe is ' |
13:33.38 | pH5 | so there's no need for an extra key code. it's the KEY_Q, Fn is just a modifier |
13:34.43 | dcordes | pH5, I guess that will apply to all blue keys then? |
13:34.53 | pH5 | yes! |
13:35.05 | infernix | unless fn key does its thing in hardware, yeah, its like ctrl or alt |
13:35.05 | marbalon | * ->?? |
13:35.13 | infernix | marbalon: asterisk |
13:35.28 | infernix | perhaps 55 but thats on the keypad |
13:35.40 | dcordes | marbalon, fn + KEY_V |
13:36.20 | dcordes | 0x1d0 + 47 |
13:38.28 | marbalon | & ? |
13:39.02 | infernix | 0x1d0 + 45 |
13:40.26 | dcordes | cr2, do you have an input driver for the hermes matrix keyboard? (because it's same like kaiser one) |
13:43.50 | *** join/#htc-linux patoche (n=root@lns-bzn-44-82-249-208-202.adsl.proxad.net) |
13:43.57 | marbalon | old kaiser driver have only korrect key mapping and gpio nums |
13:44.58 | marbalon | now I add function called every kbd event, and if Fn pressed I change keymap |
13:46.18 | pH5 | marbalon: you shouldn't do that in the kernel |
13:46.45 | marbalon | yes |
13:47.05 | pH5 | this is userspace stuff |
13:48.39 | dcordes | pH5, you think there's a way to put this into the driver? |
13:48.45 | marbalon | pH5:I know there is two ways... |
13:49.00 | dcordes | I mean wouldn't it be better to have it in the kernel? |
13:49.34 | marbalon | pH5: one load a correct kaymap for this keyboard but you cant emulate Fn key |
13:49.52 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
13:50.03 | marbalon | because you can relese the Fn key and after that you can pres another |
13:50.42 | infernix | in fact, pressing Fn twice puts it in 'hold' |
13:50.42 | dcordes | marbalon, ah you make it like in wm6? |
13:50.51 | infernix | all key presses afterwards are Fn + x |
13:50.59 | infernix | until Fn is pressed again to un-hold |
13:51.08 | infernix | that might indeed be very tricky in userspace |
13:51.37 | infernix | cant think of a way to do that with xmodmap |
13:51.38 | dcordes | we could just do it like on a normal keyboard for now? |
13:51.41 | dcordes | would be ok with me |
13:51.59 | pH5 | hm, n810 does handle this in userspace just fine. |
13:52.12 | infernix | maybe xkbindkeys can do it |
13:52.20 | infernix | err, xbindkeys |
13:52.22 | pH5 | if you hard-code it in the kernel, it is impossible to try other behaviours |
13:52.37 | infernix | ok well then we'd have to have a look at how n810 does it |
13:53.14 | infernix | perhaps through evdev with some userspace daemon |
13:54.14 | marbalon | but change kaymaping after Fn key pressed in kernel is simple |
13:55.15 | pH5 | marbalon: at least make it optional because a user might want to map fn to ctrl instead or implement fn-handling with a timeout or ... |
13:56.47 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
13:58.06 | pH5 | btw, great to see that kaiser development finally starts to roll :) |
13:58.45 | *** join/#htc-linux Dinde (n=kayser@sur-internet.net) |
13:59.52 | *** join/#htc-linux Nickbee (n=Dheeraj@122.160.64.226) |
14:01.09 | infernix | caps lock works the same way btw |
14:01.23 | infernix | pressing shift twice will hold it, effectively being capslock |
14:01.28 | dcordes | pH5, yes thanks to dzo's initial patches. can you look at the kaiser.conf line above? I really can't figure why virtual/kernel still builds that crap.... |
14:04.07 | pH5 | dcordes: bitbake nokernel and show me the log. I have no idea what's going wrong, it works here. |
14:05.39 | dcordes | pH5, PREFERRED_PROVIDER_virtual/kernel = "nokernel" is that right? |
14:07.52 | pH5 | dcordes: yes, but it doesn't matter yet for the "bitbake nokernel" test |
14:13.06 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
14:13.53 | dcordes | pH5, "bitbake nokernel" just went fine |
14:14.53 | pH5 | dcordes: care to pastebin your complete kaiser.conf? |
14:15.24 | dcordes | http://pastebin.com/m9a65b3f |
14:18.49 | pH5 | dcordes: ok, parsing... |
14:21.03 | dcordes | ok brb |
14:21.37 | *** join/#htc-linux BabelO_ (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
14:21.46 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
14:25.04 | pH5 | dcordes: haha, works here |
14:25.41 | pH5 | I don't get it, please also show me the complete log of bitbake virtual/kernel :/ |
14:38.53 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1def0.pool.einsundeins.de) |
14:42.20 | *** join/#htc-linux surgex0 (i=surge@pool-71-251-163-113.bflony.east.verizon.net) |
14:43.51 | dcordes | pH5, looks like I'm good in messing up tmp |
14:44.29 | dcordes | building.. |
14:45.16 | dcordes | pH5, http://pastebin.com/m3ee8851 |
14:45.26 | pH5 | dcordes: bbiab |
14:46.30 | *** join/#htc-linux JEEB (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
14:53.06 | *** join/#htc-linux LunohoD_ (n=alex@e180070123.adsl.alicedsl.de) |
15:02.20 | BabelO | cr2: you can try this on n560 http://forum.xda-developers.com/showthread.php?t=334667 |
15:02.32 | BabelO | cr2: maybe it can help you for resume thing |
15:06.32 | BabelO | pof: around ? ;) |
15:15.27 | pH5 | dcordes: did you notice that line "NOTE: multiple providers are available for virtual/kernel (poodle-kernel-2.4-embedix, c7x0-kernels-2.4-embedix, shepherd-kernel-2.4-embedix, collie-kernels-2.4-embedix, linux, linux-bast, linux-msm, corgi-kernel-2.4-embedix, linux-bd-neon-2.6, linux-omap-2.6, poodle255-kernel-2.4-embedix, gumstix-kernel, husky-kernel-2.4-embedix, linux-rt);"? |
15:15.37 | pH5 | strangeness #1, nokernel is not in that list |
15:15.55 | pH5 | strangeness #2, PREFERRED_PROVIDER_virtual/kernel is not set |
15:16.04 | pH5 | are you sure you are building with the correct MACHINE="kaiser"? |
15:16.13 | pH5 | and everything is in your BBPATH? |
15:17.39 | dcordes | pH5, hm I have set htckaiser |
15:17.58 | dcordes | because the filename is htckaiser.conf |
15:19.06 | pH5 | should be ok just the same. important is only that they are equal. |
15:19.18 | dcordes | they are |
15:19.50 | dcordes | in local.conf is MACHINE = "htckaiser" and conf is machine/htckaiser.conf |
15:22.37 | *** join/#htc-linux CVirus (n=GoD@82.201.178.187) |
15:24.54 | pH5 | dcordes: haha, I've got it: PROVIDES="virtual/kernel" |
15:25.17 | pH5 | of course we have to re-add that line to nokernel.bb when we remove "inherit kernel". forgot about that. |
15:25.57 | dcordes | pH5, ok. but why did it build for you? did you already have the line? |
15:26.14 | pH5 | yup. stupid automatisms. |
15:28.23 | dcordes | pfff stupid you! |
15:28.47 | dcordes | oh no |
15:29.58 | dcordes | lol added it to the machine.conf ^^ |
15:30.34 | dcordes | pH5, is there a bit for bitbake to force reparsing? |
15:31.01 | pH5 | no. it does that automatically as soon as you change the files. |
15:38.04 | dcordes | pH5, still the same with thi http://pastebin.com/m4afac281 packages/linux/nokernel_0.1.bb |
15:47.49 | dcordes | damn old oe |
15:52.23 | *** part/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
15:55.50 | dcordes | pH5, a -c rebuild did the trick |
16:21.12 | *** join/#htc-linux NiZoX (n=nizox@eros.ph0k.eu) [NETSPLIT VICTIM] |
16:22.46 | *** join/#htc-linux kbingham (n=kbingham@cvs.mpc-ogw.co.uk) [NETSPLIT VICTIM] |
16:23.32 | *** join/#htc-linux patoche (n=root@lns-bzn-44-82-249-208-202.adsl.proxad.net) |
17:39.47 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-69-20-242.dynamic.dsl.as9105.com) |
17:55.28 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
18:03.04 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
18:06.07 | *** join/#htc-linux patoche (n=root@lns-bzn-28-82-250-131-104.adsl.proxad.net) |
18:21.19 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
18:21.19 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
18:34.05 | ltxda | hey peeps |
18:34.14 | ltxda | and don't worry, i say hi to you poops also |
18:34.15 | ltxda | :p |
18:34.41 | ltxda | wow everyone must be taking a nap :) |
18:35.38 | cr2 | lol |
18:36.03 | pH5 | another worthy contender for "shortest attention span ever" award? :P |
18:36.23 | cr2 | ltxda: does your touchscreen work in linux ? |
18:36.25 | BabelO | ola cr2 :) |
18:36.31 | cr2 | hi BabelO |
18:36.49 | BabelO | cr2: ok so android run on BA but not faster than qtopia ;) |
18:36.58 | BabelO | i think i keep qtopia for a long time |
18:37.18 | pH5 | BabelO: any further progress on sound? |
18:37.22 | BabelO | cr2: i just post the pof tools earlier, do you see it ? |
18:37.43 | BabelO | pH5: no, i fix some Mic istake in driver |
18:38.31 | ltxda | cr2, which device? |
18:38.33 | cr2 | BabelO: yes, you i think it's very htc phone specific |
18:38.39 | cr2 | ltxda: shift |
18:38.43 | ltxda | no :( |
18:38.52 | ltxda | I'm trying to get the damn NIC working on BackTrack3beta |
18:38.55 | cr2 | ltxda: do you see it in the registry ? |
18:39.01 | ltxda | haven't had time to look yet. |
18:39.07 | BabelO | cr2: acording to the whole post it seem no |
18:39.20 | ltxda | I keep getting distracted by kids and family so i haven't been able to make headway |
18:39.43 | cr2 | pof posted the driver, but it's non-obvious what to do. |
18:39.47 | cr2 | ok. |
18:39.47 | ltxda | BackTrack3beta boots to USB fine. Great graphics, etc. Need to get NIC driver sorted out and wanted to do touchscreen after that |
18:39.56 | ltxda | the driver is on Marvell.com |
18:40.05 | cr2 | sdio ? |
18:40.09 | ltxda | but i'm on the Windows side |
18:40.11 | ltxda | yes sdio |
18:40.13 | cr2 | ok |
18:40.28 | ltxda | http://www.marvell.com/drivers/driverDisplay.do?dId=153&pId=36 |
18:40.29 | ltxda | there |
18:40.38 | ltxda | that's the one if i didn't screw up the search criteria :) |
18:40.50 | ltxda | but my first goal is to get it on the Windows side. |
18:41.00 | ltxda | after that it'll be the WM side but we need to get the unlocker finished |
18:41.15 | ltxda | what POF posted won't be too useful yet...until device is unlocked. |
18:41.19 | ltxda | or am i missing something? |
18:42.02 | ltxda | i want to get Linux/BackTrack3 working on it as that will be extremely useful for everyone then go into some other Windows Vista/XP items |
18:42.03 | cr2 | don't know. his posting was very promising. |
18:42.15 | ltxda | yes very indeed but we need it unlocked. |
18:42.24 | ltxda | My team has a preliminary unlocker already :) |
18:42.26 | ltxda | ...but... |
18:42.29 | cr2 | btw, the sdio is an sdhci driver, what does is have to do with unlocking ? |
18:43.00 | ltxda | it has nothing to do with unlocking but in order to get WM doing much of anything and to load unsigned crap to the device it's useful to have it unlocked |
18:43.15 | cr2 | ok. |
18:43.21 | ltxda | cmonex and olipro should have a device in another week or so and they will be testing the unlocker they already started working on |
18:43.31 | cr2 | ok. |
18:43.52 | ltxda | so i'm not really focussing on WM side of it yet until that unlocker is done. I want to get things sorted on the Windows side. |
18:44.15 | ltxda | Im also going to test Windows XP Tablet edition and see if i can extract the Vista touch screen drivers and use it under it |
18:44.36 | ltxda | if i could just have a couple of hour sto work without getting pulled away it would be nice and i might have made some progress by now :) |
18:46.16 | ltxda | cr2, something wrong bro/ |
18:46.17 | ltxda | ? |
18:46.19 | ltxda | :/ |
18:47.08 | cr2 | i'm busy with weird cpus and other funny software |
18:47.19 | ltxda | gotcha |
18:49.11 | ltxda | dont get me wrong, i wasn't downplaying what POF released, just explaining where I am on this |
18:49.24 | ltxda | i wouldn't want to have to bitch slap anyone :P |
18:51.30 | cr2 | i don't have shift. x86 is not very interesting :) |
18:51.54 | ltxda | :) |
18:52.13 | ltxda | i barely have time for it. i feel like a tard cause i don't have time to play too much with it; |
18:59.37 | cr2 | i see |
18:59.51 | cr2 | pH5: did you commit the Marex's patches ? |
19:00.40 | ltxda | cr2, who told u i had a shift anyhow? you sneeky bastard you. |
19:01.19 | cr2 | ltxda: i still can read xda-dev ;) |
19:01.44 | ltxda | i dont remember posting that i had one YET on there. |
19:01.50 | ltxda | interesting....very interesting. |
19:01.51 | pH5 | cr2: no, I'm busy preparing the pxa2xx-ssp/uda1380 soc stuff for 2.6.25 |
19:02.19 | ltxda | i said i ordered one but not that i got it yet. :p |
19:02.43 | ltxda | cr2, so what ever became of Linux on Athena? |
19:03.20 | cr2 | pH5: ok, then i'll commit it. i'm not happy with the asic3 gpio handling there, but ok. |
19:04.13 | cr2 | ltxda: it works off the USB stick, i have found most datasheets and many linux drivers: HDD, USB 2.0 client, accelerometer |
19:04.51 | cr2 | ltxda: after i'll finish the n560, i'll spend all my time on ATI SD driver. |
19:05.40 | cr2 | resuming is not a problem too. the gps and BT will work after the power gpios are added. |
19:06.37 | ltxda | nice. i want to test it out when i get some time |
19:06.53 | ltxda | maybe i'll just reduce my sleep to about 2 hours a day to get the extra time. that shoudl be fun. |
19:06.55 | ltxda | should |
19:07.01 | cr2 | :) |
19:07.09 | cr2 | do you have the TV/USB host cable ? |
19:07.16 | ltxda | yes |
19:07.29 | ltxda | i can test stuff if you need. do you have an Athena? |
19:07.29 | cr2 | then it should work. |
19:07.33 | cr2 | yes |
19:07.37 | pH5 | cr2: ok, thanks. the asic3 code will need fix-ups when we move to mainline anyway. |
19:08.03 | *** join/#htc-linux mistadman (n=mistadma@adsl-250-234-215.msy.bellsouth.net) |
19:08.05 | cr2 | pH5: is it possible to use generic gpio stuff for asic3 right now ? |
19:08.19 | mistadman | Hello everybody! |
19:08.22 | cr2 | pH5: not the _alt & such, but to get/set/direction |
19:08.33 | ltxda | cr2, still command line linux no gui yet? or just basic gui? |
19:08.41 | cr2 | ltxda: qtopia |
19:08.48 | ltxda | brb |
19:08.50 | ltxda | link? |
19:09.00 | cr2 | ltxda: the touchscreen works, btw. |
19:09.12 | cr2 | hmm. i used qtopia from universal |
19:09.24 | cr2 | maybe i'd upload a working image somewhere. |
19:09.31 | mistadman | Question: I am porting the HTC Athena to Android, but I am having problems with the Keyboard driver. Anyone have any suggestions or can point in the right direction? |
19:09.56 | mistadman | uhhh-> Android to Athena... Sorry |
19:09.59 | cr2 | mistadman: i think it's vice versa :) |
19:10.21 | mistadman | hehe beat cha to the punch! |
19:10.25 | cr2 | it's an spi keyboard, which is implemented for hermes |
19:10.42 | mistadman | Cool, I will start there. Thanks! |
19:11.00 | mistadman | I have been making pretty good progress. |
19:11.03 | cr2 | you need to write some glue code for the irq handler and applying power on connect. |
19:11.10 | ltxda | mistadman, i know a couple of fellas that actually have some resources for this. we were actually going to start to do it also |
19:11.25 | mistadman | Can you point me in there direction |
19:11.27 | cr2 | all the details are in the xda-dev wiki. let me know if you need more. |
19:12.09 | Marex | cr2, if all are there , how can you know more? ;D |
19:12.10 | cr2 | http://wiki.xda-developers.com/index.php?pagename=AthenaResearch |
19:12.12 | mistadman | Yeah, I have been mulling it over for the last week or so |
19:12.39 | cr2 | Marex: i've written it down for myself. it's not very verbose sometimes. |
19:12.46 | mistadman | I am to the point android boots to the cyclopes eye |
19:12.57 | mistadman | I am sooo close I can taste it. |
19:13.02 | Marex | cr2, just joking ;) |
19:13.04 | cr2 | http://wiki.xda-developers.com/index.php?pagename=AthenaGPIO |
19:13.08 | *** join/#htc-linux pH5 (n=ph5@p5485C91C.dip.t-dialin.net) |
19:13.16 | cr2 | GPIO 10 00000400 keyboard in/out I0 REFE |
19:13.34 | cr2 | this goes up on keyboard connect, and down on disconnect |
19:13.34 | mistadman | Thanks cr2 |
19:13.46 | cr2 | GPIO 9 00000200 keyboard button pressed irq I1 REFE |
19:13.51 | cr2 | this one is obvious |
19:14.25 | cr2 | GPIO 69 00000020 keyboard power? O 1 |
19:14.32 | cr2 | this is keyboard power |
19:14.46 | mistadman | What I am looking for is the basic keybord driver skeleton. |
19:14.55 | cr2 | should be set to 1 when it's connected (gpio10=1) |
19:15.08 | mistadman | awesome |
19:15.46 | pH5 | cr2: the get/set work, I'm not sure about set_direction |
19:15.52 | cr2 | it's on SSP2, you should check the SPI speed, i don#t remember. |
19:16.22 | cr2 | mistadman: it's a "generic" spi keyboard, check the hermes driver in linuxtogo git. |
19:16.56 | mistadman | Thats what I am looking for! b right back... |
19:17.01 | cr2 | Marex: can you check it and start converting away from the ancient interface ? |
19:17.29 | cr2 | mistadman: the keycodes are all in the wiki |
19:17.36 | mistadman | Thanks |
19:18.04 | cr2 | you get a GPIO9 irq, and should pick the keycode off spi. |
19:18.14 | cr2 | it's all implemented for hermes already. |
19:18.21 | mistadman | Also I am trying to implement a basic video driver based of of the w100 (wallaby)... |
19:18.32 | cr2 | you need to add the connect detection irq handler, and apply power. that's all.- |
19:18.42 | mistadman | Cool |
19:18.47 | cr2 | it's not going top work. |
19:18.54 | cr2 | s/top/to/ |
19:19.07 | cr2 | there are some substantial differences. |
19:20.01 | cr2 | i have printed out the LCD init disassembly, and tried to analyze it with color markers. |
19:20.03 | mistadman | Ok, what about modifing the Very Simple Framebuffer Driver to support "Page Flipping"? |
19:20.41 | cr2 | you can use the video SDRAM freely, i guess |
19:20.54 | cr2 | to do some basic acceleration |
19:21.20 | mistadman | Well, this is route I will probably take then |
19:21.31 | cr2 | i just wanted to tell you that i've already done a lot in this direction (LCD init). don't reinvent the wheel :) |
19:21.50 | mistadman | Is it posted? |
19:22.04 | mistadman | anywhere? code? |
19:22.17 | cr2 | i need to write in down from the paper. |
19:22.21 | cr2 | not yet. |
19:22.34 | mistadman | What are you waiting for? LOL |
19:22.39 | cr2 | and there are some really tough places. |
19:23.05 | cr2 | btw, some things are already implemented. |
19:23.14 | cr2 | the ATIDBG command in haret |
19:23.38 | cr2 | i've tried to document the ATI wince api there |
19:23.55 | cr2 | but actually i've more notes not in the wiki :) |
19:24.27 | cr2 | the ATI SD driver is done for 90%, only the irq handler is missing. |
19:24.54 | cr2 | the ATI I2S registers are in the wiki. |
19:25.17 | cr2 | ATI I2C is needed only if you want do drive the 3Mpix camera |
19:25.21 | dcordes | cr2, hi do you have a hermes matrix kbd driver? |
19:25.46 | cr2 | but there is no linux driver for it anyway, so welcome to some hardcore I2C tracing :) |
19:26.06 | cr2 | should be easy to do with haret by tracing the PXA i2c port. |
19:26.28 | cr2 | dcordes: hermes kbd is an spi microcontroller, not matrix. |
19:27.00 | dcordes | ok. I just thought marbalon could need it for kaiser inputdriver |
19:27.37 | cr2 | mistadman: so i've gave up on the camera, because it's a very tough task (you need to RE the ATI video capture port too ;) |
19:28.15 | Marex | cr2, check what ? |
19:28.26 | mistadman | dcordes: I am currently browing linux-to-go git for hermes kbd driver. Cant find it though... I will keep looking... |
19:28.28 | Marex | cr2, sorry, Im studying and not following really |
19:28.33 | cr2 | Marex: generic gpio interface for asic3 gpios |
19:29.13 | Marex | cr2, sure, but not now |
19:29.33 | Marex | cr2, I'll ask you to point me to it later ;) |
19:29.39 | cr2 | mistadman: btw, pH5 has the htc-egpio driver for 2.6.25, so you can use 2.6.25 for athena too. |
19:29.45 | cr2 | Marex: ok. |
19:29.50 | Marex | thanks |
19:29.59 | mistadman | ph5? |
19:30.27 | mistadman | nevermind |
19:30.33 | mistadman | Thanks cr2 |
19:30.42 | Marex | cr2, j/w have you commited the patch ? |
19:30.52 | *** join/#htc-linux tom1502 (n=thomas@p57A5B94B.dip0.t-ipconnect.de) |
19:30.58 | tom1502 | hi all |
19:31.36 | tom1502 | anyone willing and able to help me getting openmoko running on my MAgician? |
19:31.41 | tom1502 | i followed: http://linuxtogo.org/~htcpxa/htcmagician/index.html |
19:31.43 | cr2 | Marex: will do it after looking for hermes spi kbd |
19:31.58 | tom1502 | BUT after boot i land in busybox and it says: |
19:32.04 | Marex | cr2, no need to hurry ;) |
19:32.48 | tom1502 | Mounting SD card /n No previous root filesystem found /n FAIL FAIL FAIL FAIL /n Root filesystem tar file not found |
19:33.26 | ltxda | cr2, is there a link on the wiki to the latest build so i can test it? |
19:33.57 | tom1502 | noone |
19:33.59 | tom1502 | ?? |
19:34.14 | cr2 | tom1502: pH5 is the magician man |
19:34.24 | tom1502 | is he here? |
19:34.36 | tom1502 | but i guess its not a HW-specific issue... |
19:34.36 | cr2 | ltxda: not really, i've not used it for some time. |
19:34.45 | *** join/#htc-linux broedje (n=hellvis@92.117.228.187) |
19:34.53 | tom1502 | pH5, are you here?! :D |
19:35.49 | tom1502 | is there any special authorisations structure necessary on the SD-cards second partition(ext3)?! |
19:36.29 | tom1502 | becaus after doing sudo tar jxvpf /home/thomas/Desktop/openmoko.linux.rootfs.tar.bz2 ./ everything is root... |
19:36.59 | cr2 | tom1502: no idea. |
19:37.31 | tom1502 | hum... probably i know where'S the mistake... MAYBE... |
19:37.34 | cr2 | mistadman: hmm. don't know where Kevin2 has hidden it. what does the hermes status page say ? |
19:38.15 | tom1502 | 2nd step says: 2) Extract the image (openmoko/gpe/x11/opie etc) to the linux partition (ext3) {tar jxvpf "image" ./} |
19:38.38 | tom1502 | is this the file available here:? http://www.linuxtogo.org/~htcpxa/htcmagician/images/OpenMoko/ |
19:39.17 | mistadman | Whats the link cr2? |
19:39.21 | mistadman | thanks!!! |
19:39.29 | ltxda | cr2, no problema senor |
19:39.38 | ltxda | i'll have to look for it old school way |
19:39.52 | tom1502 | !seen pH5 |
19:40.05 | ltxda | !seen Linux for Athena |
19:40.07 | ltxda | lol |
19:40.08 | ltxda | ;p |
19:40.13 | tom1502 | wants every but to know this command ;-) |
19:40.19 | tom1502 | but=bot |
19:40.24 | tom1502 | :D |
19:40.37 | ltxda | didn't work for me tom1502 |
19:40.40 | ltxda | :p |
19:40.48 | mistadman | ltxda: I am currently porting Android to the Athena... |
19:40.48 | ltxda | !kick everyone |
19:41.08 | ltxda | mistadman, did you get any of the axim files? |
19:41.13 | ltxda | :) |
19:41.33 | ltxda | you have it booting? |
19:41.35 | tom1502 | ltxda, what did you mean didnt work, the !seen, or openmoko on magician? |
19:41.48 | mistadman | Wellll.... |
19:41.50 | ltxda | tom1502, it was a joke. |
19:41.53 | mistadman | Yes and no |
19:41.57 | pH5 | ~seen pH5 |
19:41.58 | apt | ph5 is currently on #maemo (28m 48s) #htc-linux (28m 48s) #handhelds (28m 48s) #oe (28m 48s) #openmoko (28m 48s) #openezx (28m 48s). Has said a total of 4 messages. Is idling for 1s, last said: '~seen pH5'. |
19:42.00 | ltxda | tom1502, i did "!seen Linux for Athena |
19:42.01 | ltxda | lol |
19:42.02 | ltxda | brb |
19:42.11 | pH5 | hej tom1502, the .exe loader available there expects you not to extract it at all. just put both files in the vfat root folder of your sd card |
19:42.11 | tom1502 | HI pH5 :D |
19:42.11 | pH5 | and run the .exe |
19:42.20 | tom1502 | LOL |
19:42.36 | mistadman | I can get it to boot to the red cyclops eye |
19:42.39 | tom1502 | thanks man, i could try this for ages that way ^ |
19:43.09 | tom1502 | pH5 does this build works well? |
19:44.45 | ltxda | mistadman, if you want help, we kinda also started on a similar project. let me know if you want to work together. |
19:45.00 | ltxda | we took files from the axim/andriod project :) |
19:45.23 | ltxda | trying to get basics setup then go from there |
19:46.32 | pH5 | no idea, actually. I'm mostly playing with the kernel. userspace is still non-working most of the time. |
19:46.37 | pH5 | tries to boot that image, too. |
19:47.11 | pH5 | I just now that today's openmoko-devel-image built fresh from OE doesn't work terribly well. |
19:48.02 | tom1502 | hehe |
19:48.24 | tom1502 | i wonder when FreeRunner will be suitable to endusers ;-) |
19:48.41 | ltxda | bbl8r |
19:48.52 | tom1502 | becaus a linux cellphone would rock! well, but the iPhone's nice too |
19:48.56 | pH5 | well, that old image boots up to the user interface at least. enough to play around a bit. not sure if the phone works. |
19:49.06 | tom1502 | ill try |
19:49.48 | tom1502 | my current main phone is the XDA terra, HTC Herald... and its horrible |
19:50.27 | pH5 | tom1502: before magician I fear, I'm just the magician kernel person, but there is nobody really working on openmoko userspace/integration for htc phones. |
19:50.42 | pH5 | (that was re: when will freerunner be suitable...) |
19:50.58 | tom1502 | i dont care... that just my old "playground" phone... |
19:51.18 | pH5 | I have a herald here, but it is locked in the bootloader, and I can't find out how to get into linux or flash anything from there.. |
19:51.34 | tom1502 | i didnt touch it since ~1year |
19:51.40 | tom1502 | do you like the herald? |
19:51.49 | tom1502 | i hate the CPU, it is soooo slow |
19:52.04 | pH5 | tom1502: form factor and keyboard? yes. the rest is .. uh, sub-optimal |
19:52.29 | tom1502 | i totaly agree :D |
19:52.54 | tom1502 | pH5... OT: where are you from? |
19:54.59 | pH5 | http://maps.google.com/maps?ll=52.514549,13.41568&spn=0.725417,1.724854&z=10 |
19:55.16 | broedje | what keeps the HTC Voyager smartphone from being flashed with OM? just for interest? |
19:55.21 | tom1502 | na dann ma Tach ;-) |
19:55.38 | broedje | tach |
19:55.55 | tom1502 | for the others... just said hello in "german"(almost germand :D) |
19:56.03 | tom1502 | broedje ;-) |
19:57.47 | tom1502 | cat /dev/ALDI-Rumtrueffel > /dem/tom1502/mouth :D |
19:58.57 | tom1502 | how long might the first boot take? |
19:59.15 | pH5 | broedje: missing kernel support. people got it to run on htc typhoon/hurricane/tornado, but I don't know of any voyager porting efforts |
20:00.14 | *** join/#htc-linux pH5|N810 (n=user@p5485C91C.dip.t-dialin.net) |
20:01.31 | cr2 | pH5: looks much better http://openstreetmap.org/?lat=52.516&lon=13.378&zoom=12 |
20:01.53 | tom1502 | hey, thats nice |
20:03.46 | tom1502 | thats where i am... http://openstreetmap.org/?lat=52.516&lon=13.378&zoom=12 |
20:03.46 | pH5|N810 | cr2: true |
20:04.01 | broedje | you mean the linux kernel is not handling the hardware? well nevermind..i thought i could one day get the SDIO running for wifi... as sychip promised last millenium |
20:04.28 | tom1502 | pH5, how long may first boot take? i am waiting for ~10minutes now?! |
20:05.14 | cr2 | broedje: it's not really using wifi |
20:05.31 | cr2 | broedje: for the data transmission anyway |
20:05.40 | broedje | if it can get iwconfig working with OM? |
20:05.43 | cr2 | broedje: i bet it's pcmcia |
20:05.43 | dcordes | pH5, nokernel builds fine. also virtual/kernel builds nokernel now. I build like 100 packets perfectly, then out of the blue some 2.6.21 shit reappears! http://pastebin.com/m36e95bce ?!! wtf is that? |
20:06.31 | cr2 | broedje: but the chip needs some init over sdio config space (like the _cs pcmcia drivers) |
20:06.35 | pH5|N810 | tom1502: took about 5min here |
20:06.48 | tom1502 | hm, ill try again |
20:06.51 | broedje | if it works under the native WM5 ... why not with linux eh!? |
20:06.59 | cr2 | broedje: hmm. sorry . s/wifi/sdio/ |
20:07.14 | broedje | what does that mean |
20:07.43 | broedje | see wifi sdio? in wiki.openmoko? |
20:07.45 | cr2 | the newer phones use the 54mbit acx100 with sdio init. |
20:08.03 | cr2 | ok, you mean moko. |
20:08.13 | cr2 | i was talking about the htc phones. |
20:09.16 | broedje | yea and here is the voyager with this sdio port and a working socketcom sdio 11b card.. comparable to them sandisk ones |
20:09.54 | broedje | it worked with that mitac ... sagem my-s7 if anyone heard of that |
20:10.16 | broedje | well im getting OT .. at least now |
20:10.26 | cr2 | lol |
20:10.28 | cr2 | http://www.handhelds.org/moin/moin.cgi/HandheldHardwareXref |
20:10.46 | cr2 | 28MB @ 0x00000000 RAM tapwarez2 |
20:11.47 | *** join/#htc-linux mistadman (n=mistadma@adsl-250-234-215.msy.bellsouth.net) |
20:14.29 | dcordes | pH5, can you take a look? |
20:14.31 | *** join/#htc-linux patoche (n=root@lns-bzn-28-82-250-131-104.adsl.proxad.net) |
20:18.41 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
20:18.42 | dcordes | I don't get this. I mean what does it want with linux_2.6.21 when it already has a provider for virtual/kernel? |
20:19.08 | dcordes | pH5, plus it only wants tsc2003.c and a defconfig |
20:19.09 | pikapika | hi |
20:19.40 | dcordes | hi ãã«ãã¥ã¦ |
20:21.05 | pH5|N810 | dcordes: I have no idea. maybe bitbake -g can tell you what this is all about |
20:22.20 | mistadman | slaps ltxda around a bit with a large trout |
20:22.31 | dcordes | pH5, NOTE: preferred version 2.6.1 of glibc not available (for item virtual/arm-angstrom-linux-gnueabi-libc-for-gcc) ?? |
20:24.13 | pH5|N810 | dcordes: don't ask me |
20:24.24 | dcordes | ok |
20:27.01 | *** join/#htc-linux mistadman (n=mistadma@adsl-250-234-215.msy.bellsouth.net) |
20:27.44 | tom1502 | n8 guys... |
20:27.52 | tom1502 | thx4all@all ;-) |
20:27.56 | *** part/#htc-linux tom1502 (n=thomas@p57A5B94B.dip0.t-ipconnect.de) |
20:28.49 | *** join/#htc-linux sigma_1234 (n=sigma_12@196.38.218.25) |
20:29.31 | sigma_1234 | can the htc oxygen run linux yet? |
20:34.49 | *** join/#htc-linux dcordes_ (n=snoopdog@unaffiliated/dcordes) |
20:41.16 | Marex | dcordes, ããªã 㯠æ¥æ¬äºº ã§ã ãï¼ |
20:45.52 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-ed6ad34f935c90b4) |
20:52.13 | cr2 | Marex: applied |
20:52.21 | dcordes_ | Marex, hmm, no. |
20:52.42 | Marex | ã ã§ã ãï¼ï¼ |
20:52.50 | Marex | cr2, thanks |
20:56.06 | mistadman | c2: where is that hermes spi drvr you were talking about earlier? |
20:57.58 | *** join/#htc-linux ltxdaMBL (n=ltxdaMBL@unaffiliated/ltxda) |
20:58.32 | Marex | cr2, btw I sent email to france about my commit access ;-) he offered it to me about a year ago, but it somehow got nowhere ... I noticed in the email from Eric that I should have asked in two weeks if it wasnt done yet |
20:58.41 | Marex | well I asked again, but it's slightly more than two weeks ;D |
20:59.10 | ltxdaMBL | Marex, that u on the forumasking for info on android ? |
20:59.57 | ltxdaMBL | alo? |
21:01.10 | Marex | ltxdaMBL, sorry, I dont get you |
21:02.30 | ltxdaMBL | on xda-dev someone with a similar name 2urs asked me for details of android on Athena...was that u? |
21:04.32 | dcordes_ | pH5, could you build me one console-image with the machine conf? |
21:05.04 | dcordes_ | Marex, are you student of the japanese language? |
21:05.08 | Marex | pH5, one GPE image please :-) |
21:05.12 | *** join/#htc-linux supbro (i=4b20ec1c@gateway/web/ajax/mibbit.com/x-5431f1ec3f819dae) |
21:05.18 | Marex | dcordes_, no why ? |
21:05.33 | dcordes_ | Marex, because you asked me japanese looking stuff |
21:05.38 | ltxdaMBL | lol |
21:05.56 | Marex | dcordes_, I asked you if you are japaneese, but then looked at your hostmask |
21:06.05 | dcordes_ | Marex, ^_° what machine do you need gpe image for? |
21:06.22 | cr2 | mistadman: can't find it too. you'd ask Kevin2 |
21:06.59 | Marex | dcordes_, beetles/sable â â â |
21:07.59 | dcordes_ | linux-hh never works in OE and pH5's nokernel thing doesn't work either here so I guess I can't help |
21:08.10 | dcordes_ | s/guess/fear/ |
21:08.30 | dcordes_ | I'm removing my tmp once again |
21:10.01 | Marex | dcordes_, I was just joking on your console image request ;) |
21:10.21 | Marex | but it might be somehow handy ... gpe image that is |
21:11.32 | dcordes_ | hope I will have more luck rebuilding from clean tmp |
21:11.54 | dcordes_ | will try and make beetles image when I finished trying |
21:12.29 | Marex | dcordes_, that didnt worked for me recently ;-) |
21:12.34 | *** part/#htc-linux supbro (i=4b20ec1c@gateway/web/ajax/mibbit.com/x-5431f1ec3f819dae) |
21:12.37 | Marex | dcordes_, I will take a look at it later |
21:13.14 | dcordes_ | task hh* do_configure failed |
21:13.17 | dcordes_ | ;P |
21:21.24 | pH5 | dcordes_: let's see, if I can reuse the n810 toolchain that might not even be an unreasonable request |
21:21.47 | pH5 | needs a dedicated buildhost |
21:22.09 | dcordes_ | I didn't want to sound rude sorry |
21:23.23 | pH5 | dcordes_: you weren't |
21:23.33 | dcordes_ | pH5, I did an rm -rf tmp once again and did a complete rebuild. guess what is being built right now: 2.6.21 |
21:23.39 | dcordes_ | annnd failed |
21:24.40 | Marex | dcordes_, why dont you just patch the .bb file ? :) |
21:24.51 | dcordes_ | Marex, which one? |
21:25.01 | pH5 | nah, starts with binutils-cross again :/ can't do that on the poor laptop in a reasonable timeframe. |
21:25.04 | Marex | 2.6.21-hh20.....bb |
21:25.19 | dcordes_ | pH5, ok thanks anyways |
21:25.32 | dcordes_ | Marex, I'm building for kaiser which should build nokernel_0.1.bb |
21:25.43 | Marex | I see |
21:25.54 | dcordes_ | don't need an OE kernel for it because everything's built in there |
21:25.55 | pH5 | maybe next week while at work |
21:28.10 | dcordes_ | pH5, trying it with ASSUME_PROVIDED += "linux-2.6.21-r12" now |
21:31.16 | Marex | dcordes_, doesnt angstrom want some kernel package in it's configuration file ? |
21:31.32 | Marex | you should dispose all possibilities where it can want -hh kernel |
21:31.43 | dcordes_ | Marex, that's what nokernel_0.1.bb workaround kernelpackage is for |
21:32.10 | Marex | I see, ok |
21:32.15 | dcordes_ | it doesn't want hh. I was just talking about the fact that OE never cares about building hh above ;) |
21:32.31 | dcordes_ | but I could try fitting something else in instead |
21:32.49 | dcordes_ | what's a nice kernel in OE that always builds? |
21:33.11 | dcordes_ | linux-rp |
21:36.47 | pH5 | good night |
21:41.59 | ltxdaMBL | marex, did u answer my question bro? am driving and might have missed it |
21:42.26 | Marex | you are driving and connected to irc ? |
21:42.33 | Marex | I hope you crash and kill yourself |
21:42.41 | mistadman | LOL |
21:43.01 | mistadman | You didnt mean that. Now behave yourself! |
21:43.44 | ltxdaMBL | marex, lol fu bitch |
21:44.15 | ltxdaMBL | marex, well bitch? |
21:44.44 | ltxdaMBL | la le la le |
21:44.44 | mistadman | Maybe he is driving too... |
21:45.02 | ltxdaMBL | i wont say what he`s driving and where lol |
21:45.29 | ltxdaMBL | i guess he`s slower than me, i can deal with that ;p |
21:48.01 | ltxdaMBL | la le la la |
21:48.42 | cr2 | ltxdaMBL: if you are driving, you'd be ltxdaSUV ;-) |
21:50.03 | *** join/#htc-linux CVirus (n=GoD@82.201.178.187) |
21:50.12 | ltxdaMBL | lol |
21:50.16 | ltxdaMBL | nice 1 |
21:50.43 | ltxdaMBL | ltxdaSpeedRacer BABY |
21:50.49 | cr2 | only SUV drivers call others bitches. |
21:51.36 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
21:51.44 | ltxdaMBL | oh yea |
21:51.54 | ltxdaMBL | i just got a suburban too |
21:51.59 | ltxdaMBL | :) |
21:52.16 | ltxdaMBL | who says its not a fast suburban ;p |
21:52.18 | ltxdaMBL | brb |
22:43.30 | ltxda | :P |
23:51.36 | Marex | cr2, ping |