00:00.23 | tsdogs | hmm, don't remember :( |
00:00.43 | dzo | can i get you to connect with haretconsole and dump some memory locations so i can check the mdp_base is OK. |
00:00.47 | cr2 | tsdogs: porting the nav stuff does not make much sense without route planner being ported first. |
00:01.09 | dcordes_ | dzo, I got the same result when we built random android kernels in case that matters. I can't recall if leds kept blinking back then |
00:01.31 | tsdogs | yes, that's the code linked to dglib |
00:01.37 | dzo | no it's not getting as far as the kernel. |
00:01.43 | dcordes_ | dzo, sure you could querry me for the commands |
00:01.44 | cr2 | tsdogs: the editor things are separate, but i dislike that it does not let you edit the oneway ? and the turn restrictions. |
00:02.01 | dcordes_ | dzo, so I guess that is the taking over problem we had always |
00:02.18 | cr2 | tsdogs: the editor code is probably too complex for our needs. |
00:02.26 | *** join/#htc-linux patoche (n=pat@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
00:02.36 | cr2 | tsdogs: i don't know what is the right way to proceed. |
00:02.46 | tsdogs | cr2: sqlite in the editor? |
00:03.08 | cr2 | tsdogs: .txt is enough |
00:03.20 | dcordes_ | dzo, shall I use the new harete, or the haret from before? |
00:03.33 | cr2 | lineid oneway -1/0/1 |
00:03.36 | dzo | yup, try vdump 0xb2100000 0x100 and then pdump 0xaa200000, they should be the same, can you paste the results to pastebin. (use the old haret) |
00:03.49 | dcordes_ | k |
00:03.59 | cr2 | tsdogs: noturn segid1,segid2 |
00:04.20 | cr2 | tsdogs: it' enough, just to have a gui for doing it. |
00:05.05 | cr2 | tsdogs: because you don't what to lookup the segids manually, and enter them by hand in kword ;-) |
00:05.21 | tsdogs | :) |
00:05.44 | tsdogs | there is sqlite source in the editor branch... |
00:05.50 | *** join/#htc-linux swc|666 (n=no@24.143.67.18) |
00:06.03 | cr2 | tsdogs: just a toolbar oneway icon |
00:06.18 | dzo | and also try pdump 0xaa210100 |
00:07.10 | cr2 | tsdogs: if it's selected then the click on a segment 'rotates' its status. if you unselect the oneway icon, the setting is appended to the .txt file |
00:07.29 | dzo | with 0x100 after all the pdumps |
00:08.07 | tsdogs | cr2: hmm, but what about the direction ? |
00:08.18 | cr2 | tsdogs: and if two segs are selected, then clicking a 'turn' option selects/deselects a turn restriction. |
00:08.48 | cr2 | tsdogs: draw it on a segment. any segment has 'to' and 'from' nodes in the db. |
00:09.02 | cr2 | so it has "natural" direction. |
00:09.21 | tsdogs | ok but that might be wrong ... |
00:09.32 | cr2 | tsdogs: when you click on a segment (now) it's highlighted. |
00:09.45 | tsdogs | ok |
00:10.25 | cr2 | yes, that' why you need 3 options: -1,0,1 as in inverse direction,twoway,db direction |
00:10.50 | tsdogs | ok |
00:10.54 | dzo | dcordes, i've got to go for lunch, I'll check the logs later. |
00:10.59 | tsdogs | so you want: |
00:11.04 | tsdogs | enter edit mode |
00:11.22 | tsdogs | this way u can select/deselect segments |
00:11.27 | cr2 | tsdogs: my own todo list is buildus8 and poi/places code. |
00:11.36 | cr2 | tsdogs: you can select/deselect already. |
00:11.42 | dcordes_ | dzo, http://pastebin.ca/960287 |
00:11.44 | cr2 | just add an editor icon |
00:11.56 | tsdogs | ok but only one segment at the time |
00:12.02 | cr2 | and a save function. |
00:12.26 | cr2 | yes, but it solves at least the oneway flag editing. |
00:12.37 | tsdogs | ok. |
00:13.18 | cr2 | if you can also do a two seg selection, it's even better :) |
00:13.26 | tsdogs | :) |
00:13.29 | cr2 | but it's a different operation. |
00:13.44 | tsdogs | ok, let's start with easy things :) |
00:13.56 | cr2 | i think the oneway editing is relatively simple to add. |
00:13.59 | cr2 | :) |
00:14.15 | tsdogs | I want to merge mainline diffs before |
00:14.27 | tsdogs | probably tomorrow/weekend task. |
00:15.25 | cr2 | ok. |
00:15.50 | cr2 | i'm busy with the n560 LCD spi stuff, so kiozen can have a working device too. |
00:16.14 | tsdogs | cr2: are u also working on the port to 2.6.25? |
00:17.09 | cr2 | not really. |
00:17.27 | cr2 | the asic3_mmc is the main problem on asic3 devices. |
00:17.33 | tsdogs | whould we gain something interesting? |
00:17.42 | cr2 | but n560 may work. |
00:17.49 | tsdogs | I mean worth the effort? |
00:17.53 | cr2 | no. |
00:17.56 | tsdogs | ok |
00:17.58 | BabelO | one kernel for all pxa devices ;) |
00:18.06 | tsdogs | ;) |
00:18.06 | cr2 | we don't have asic3_sdio anyway. |
00:18.20 | cr2 | and i'd better do atiw_sdio first. |
00:18.51 | cr2 | asic3_sdio driver is a separate job on extending asic3_mmc |
00:19.46 | cr2 | BabelO: i've modified the error names in asic3_mmc, so the driver compiles cleanly, but there is some irq handler stuff that's not so easy. |
00:20.34 | cr2 | BabelO: it's a similar problem to the atiw_mmc, where i also don't have a full understanding of the irq handling by the ati chip. |
00:20.52 | cr2 | but asic3_mmc should be easier, because you already have a working driver. |
00:22.09 | BabelO | cr2: ok ;) i just want to finish this acx mac8011, i miss something , but did not found where |
00:22.56 | cr2 | BabelO: we'd have acx_sdio soon. to replace the acx_cs on newer 54mbit devices |
00:23.23 | cr2 | that's the main reason to move to .25 |
00:23.37 | cr2 | but afair no asic3 devices have 54mbit |
00:23.41 | dcordes_ | dzo, exception while reading.. is not a good sign I guess? |
00:23.52 | BabelO | cr2: agree with that, artemis is on sdio too |
00:24.02 | cr2 | BabelO: and msm |
00:24.38 | cr2 | BabelO: i think it's only the 'cardctl' stage (and fw update, hwaddr change) |
00:25.00 | cr2 | that works over sdio. the rest may be on the pmcia mem too. |
00:25.11 | BabelO | ok, goind to bed, i will try to found mybug tomorrow :) |
00:25.18 | cr2 | good night |
00:25.26 | BabelO | cr2: and bt does not want ot run at 921600 :( |
00:25.47 | BabelO | it gave me error frame 00 not known |
00:25.56 | evilrox | cr2: with haret20071122 i've been able to telnet in to my device |
00:26.01 | tsdogs | good night |
00:26.02 | BabelO | [ 840.780000] h4_recv: Unknown HCI packet type 00 |
00:26.09 | dcordes_ | gnite tsdogs |
00:26.09 | BabelO | good night |
00:26.28 | cr2 | evilrox: i've finished the dl. |
00:26.38 | evilrox | ty |
00:27.20 | cr2 | 921600 nees a BTS command. |
00:29.47 | cr2 | evilrox: battery mon may be on i2c. |
00:30.32 | evilrox | cr2: what? |
00:31.41 | evilrox | oh |
00:32.14 | evilrox | so i've to buy another smartphone to have linux in it, no chance? |
00:32.52 | cr2 | evilrox: no, just an info. |
00:34.17 | cr2 | evilrox: i think we will get it to boot linux relatively fast. |
00:34.28 | evilrox | cr2: awesome |
00:34.42 | cr2 | but it'll take some time to sort out the gpios and suspend/resume. |
00:35.08 | evilrox | i can help you someway? |
00:35.15 | evilrox | can i* |
00:35.39 | cr2 | not right now. |
00:35.46 | cr2 | wait a bit :) |
00:36.10 | evilrox | ok, thanks for all, you're great |
00:43.43 | *** join/#htc-linux evilrox (n=evilrox@unaffiliated/evilrox) |
00:44.09 | cr2 | GPIO 19 00080000 |
00:45.01 | cr2 | GPIO 14 00004000 |
00:45.57 | cr2 | <PROTECTED> |
00:46.11 | cr2 | <PROTECTED> |
00:46.21 | cr2 | dcordes_: it's evil :( |
00:47.24 | evilrox | 1.50 am here, night cr2 :) |
00:47.45 | evilrox | 'night |
00:48.31 | dcordes_ | cr2, hm? |
00:48.46 | dcordes_ | good night evilrox |
00:49.05 | evilrox | 'night dcordes_ ;) |
00:50.39 | cr2 | dcordes_: n560 needs to send this spi stuff on wakeup |
00:51.00 | dcordes_ | ah you are talking about the bitbangers |
00:51.07 | cr2 | yes. |
00:51.14 | cr2 | this is strange |
00:51.30 | cr2 | because the same lcd on the universal does not need it. |
00:52.15 | cr2 | it seems i need to do the bitbanging driver ... |
00:59.55 | cr2 | ok, good night |
00:59.55 | tsdogs | cr2: in roadmap_editor it changed almost all function definitions :(, there needs some work to be done to use qt ... |
01:00.01 | tsdogs | good night :) |
01:00.23 | cr2 | tsdogs: yeah, but i think because of the fontsize ? |
01:00.52 | tsdogs | cr2: could be haven't looked that deeper, I get a bunch of undefined reference to... |
01:01.18 | cr2 | ok. |
01:01.38 | cr2 | you've packed it all into the Pen ? |
01:01.52 | cr2 | it's the most sane approach anyway. |
01:01.59 | tsdogs | the drawing propertied? |
01:02.04 | tsdogs | yes |
01:02.33 | tsdogs | hmm maybe it's just a Makefile problem. |
01:03.45 | tsdogs | nope, added a callback to many of them :( |
01:04.38 | cr2 | ok. |
01:05.29 | tsdogs | it's mainly a dialog issue, so fixing should be trivial. is it worth ? |
01:07.32 | cr2 | what are you editing ? |
01:07.50 | tsdogs | _editor cvs |
01:08.03 | tsdogs | just giving it a try to build with qt :) |
01:08.18 | cr2 | the latest ? |
01:08.24 | tsdogs | cr2: yes |
01:08.31 | cr2 | which version is that ? |
01:09.02 | tsdogs | hmm, no tags |
01:09.36 | tsdogs | roadmap_gps.c/1.23/Mon Feb 4 10:27:52 2008// |
01:09.48 | cr2 | th last tag is 0-10-0pre2 i think |
01:10.19 | cr2 | or 0-10-0rc7 |
01:10.56 | cr2 | it has A* routing algorithm, that's why it's interesting. |
01:11.25 | tsdogs | ok cheking tags, though I just did a cvs up. |
01:11.35 | cr2 | and i guess i'll be able change the postgis interface, so we can feed it some .mp map |
01:11.52 | cr2 | afair we have 0-8-3+hacks |
01:12.16 | tsdogs | cr2: there is no 0-8-3 tag in _editor |
01:13.35 | tsdogs | never mind, i was looking at branches :/ |
01:14.53 | cr2 | ok, then i don't rememeber |
01:14.55 | tsdogs | I should be on: V0_10_0_rc7 (revision: 1.1.1.1) |
01:15.01 | cr2 | the latest ? |
01:15.10 | cr2 | or pre2 ? |
01:15.51 | tsdogs | pre2 is before |
01:16.05 | cr2 | i think it has some segment speed statistics (for traffic jams?), so it should be really advanced thing. |
01:16.07 | cr2 | ok. |
01:16.08 | tsdogs | then we have: |
01:16.08 | tsdogs | <PROTECTED> |
01:16.08 | tsdogs | <PROTECTED> |
01:16.08 | tsdogs | <PROTECTED> |
01:16.31 | tsdogs | and then pre2 |
01:16.36 | cr2 | ok. |
01:16.40 | dcordes_ | good night all. dzo poke or email for further reference |
01:17.07 | tsdogs | cr2: working day tomorrow. good night :) |
01:17.33 | cr2 | good night :) |
01:23.27 | *** join/#htc-linux noelcragg (n=noel@166.129.77.189) |
01:23.35 | *** part/#htc-linux noelcragg (n=noel@166.129.77.189) |
01:43.42 | *** part/#htc-linux swc|666 (n=no@24.143.67.18) |
02:03.15 | *** join/#htc-linux joschkopf79 (n=joschi@92.226.131.249) |
02:18.40 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-77-27-47.dynamic.dsl.as9105.com) |
03:07.34 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
03:07.34 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
03:37.07 | *** join/#htc-linux Zoolooc__ (n=fredsiba@nrbg-4dbfa788.pool.einsundeins.de) |
05:13.46 | *** join/#htc-linux laptor (n=laptor@unaffiliated/laptor) |
05:30.49 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
06:36.09 | *** join/#htc-linux _mxer_ (i=sativa@ip68-230-62-137.ph.ph.cox.net) |
06:50.33 | *** join/#htc-linux kiozen (n=kiozen@p5492A41B.dip0.t-ipconnect.de) |
07:26.24 | kiozen | cr2: you are right, there was a bug |
07:26.28 | kiozen | svn up |
07:58.57 | *** join/#htc-linux rob_w (n=bob@X00ff.x.pppool.de) |
08:14.16 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
08:28.55 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
08:40.48 | *** join/#htc-linux pH5 (n=ph5@p5485E60F.dip.t-dialin.net) |
08:40.52 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
08:50.28 | BabelO | hi |
08:50.45 | kiozen | morning |
08:51.03 | BabelO | pH5: any idea why kexec does not works on BA or maybe can you explain how kexec works in general ? |
08:51.07 | BabelO | morning kiozen |
08:53.29 | pH5 | morning |
08:53.37 | pH5 | BabelO: I have no experience with kexec whatsoever |
08:53.59 | BabelO | pH5: ok :( |
08:54.03 | pH5 | it doesn't work for me either |
08:54.09 | pH5 | - magician, blueangel, same result |
08:54.30 | pH5 | removing /boot/zImage from the rootfs works around that though |
08:54.41 | pH5 | then it just keeps using the initial kernel |
08:54.45 | BabelO | pH5: yesturday i managed to merge acx mac80211 with hh mem and cs driver ;) |
08:54.55 | pH5 | wha.. |
08:54.55 | BabelO | still a little segfault remaining |
08:55.07 | pH5 | great! |
08:55.20 | pH5 | (the merging, not the segfault, obviously) |
08:56.13 | BabelO | pH5: yes, lol :) anyway i see wmaster0 and slave wlan devices, i ll try to finish it today, maybe you can test on hx4700 if you have time |
08:58.14 | pH5 | yes, I'll try. |
08:58.19 | pH5 | starts a hx4700 image build |
09:02.15 | BabelO | pH5: why there is no apm on n800 ? battery is empty very fast |
09:05.46 | pH5 | apm? there is no such thing, even on our devices it's just a software interface (apm emulation) |
09:06.08 | pH5 | you can send force it to sleep with echo mem > /sys/power/state |
09:06.30 | pH5 | but I'm not sure if that uses significantly less energy than auto-idle in offline mode |
09:09.19 | BabelO | pH5: ok, because, when device shut of screen, it seem that after 8 hour battery is empty :( |
09:15.51 | pH5 | that's not much. shouldn't it hold out like a week? |
09:17.06 | pH5 | mine has not been without ac for more than three days in a row, but it certainly lives more than a day even with wifi turned on (unless I use it) |
09:18.20 | BabelO | pH5: maybe i have to try kernel with another option :( a day is the max i can get i f i did not shutoff wifi |
09:21.48 | *** join/#htc-linux jeebster (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
09:24.31 | *** join/#htc-linux kiozen_ (n=kiozen@p5492A41B.dip0.t-ipconnect.de) |
09:24.46 | kiozen_ | BabelO: https://s3.amazonaws.com/ppt-download/power-management-for-the-nokia-internet-tablets565.pdf |
09:27.30 | pH5 | kiozen_: thanks, that's an interesting set of slides |
09:28.10 | BabelO | kiozen_: thx, that is what i was thinking about dyn_tick ;) and interesting, all power consumming are written here ;) |
09:28.32 | kiozen | it's from wkipedia :P |
09:55.46 | cr2 | kiozen: compiling |
09:56.02 | cr2 | kiozen: it's a complex math that you do there :) |
09:56.06 | cr2 | <PROTECTED> |
09:56.16 | cr2 | Pixel Size = (5.157079730473107,-5.157079730473107) |
09:56.44 | cr2 | what else do you need to draw a scalebar ? |
09:57.09 | kiozen | real meters |
09:57.24 | cr2 | on GK they are real |
09:58.07 | kiozen | yes if I always use GK, but the scale bar has to work for everything else, too |
09:58.07 | cr2 | i'll check on a GK map now after compiling. |
09:58.15 | cr2 | ok. |
09:58.33 | cr2 | btw, i've traced what's the problem with the LCD wakeup yesterday. |
09:58.59 | cr2 | i need to send some spi commands to the LCD on suspend and wakeup. |
09:59.14 | cr2 | the bootloader does not care about such things. |
09:59.23 | cr2 | therefore i've not seen it before. |
09:59.58 | cr2 | now it's too wide :) |
10:00.10 | cr2 | before it was too narrow. |
10:00.20 | kiozen | just a few px |
10:00.37 | kiozen | that is because I use a globe and |
10:01.00 | kiozen | qt will add the line width pixel to the endpoints |
10:01.20 | kiozen | but i need these px to make it look nice |
10:01.38 | kiozen | of course i could try to compensate the px |
10:01.49 | cr2 | it's more than just some pixels. |
10:02.06 | cr2 | i'll check on a 3m/pix map later today. |
10:02.11 | kiozen | try the following: |
10:02.20 | cr2 | where i have the 1km grid too. |
10:02.21 | kiozen | add a waypoint and copy it's location |
10:02.37 | kiozen | add a 2nd and use the copied location |
10:03.00 | kiozen | next move the 2nd waypoint by distance and 90 deg |
10:03.20 | kiozen | this is done by the vincenty method on a WGS84 ellips |
10:03.31 | kiozen | use that to test the bar |
10:04.09 | kiozen | next use one of the wpts and use the projection from the edit dlg to moce it back |
10:04.19 | kiozen | this is done on a globe |
10:04.52 | cr2 | hmm. sounds too complex for me. |
10:05.00 | kiozen | the total error was about 6-8 px when I tried, and that should be ok |
10:05.38 | kiozen | I wouldn't trust anything drawn on a map |
10:06.03 | cr2 | 8pix*5m/pix=40m error |
10:06.15 | cr2 | on a 1:20000 map it's too much. |
10:08.21 | cr2 | i've just picked a sample map here http://mapy.mk.cvut.cz/data/Finsko-Finlandia/Karjala/cd1/kartat/topografinen_20000/ |
10:08.31 | kiozen | I can fix the error by qt, but after all it's just a scale bar, no one will use it to measur things on the meter |
10:09.01 | cr2 | ok. |
10:11.23 | kiozen | wonders how much fun it must be to hike in Finland with a map from 1939 |
10:15.13 | cr2 | kiozen: lol. these are the best military raster maps i know. the fact that they are from 1939 make it even more amazing. |
10:16.52 | kiozen | cr2: sure the hills and valleys will be accurate, rivers, too, but it will be fun to stand on the paddio of the locals, and telling them: you are not supposed to be here. look at my map. |
10:19.58 | cr2 | agreed, but this can happen even if you use the imagery from the not so evil company too. |
10:20.58 | cr2 | at least in the cities. |
10:21.04 | kiozen | never trust a map ;) |
10:21.19 | cr2 | yeah. |
10:25.29 | kiozen | cr2: svn up |
10:26.17 | BabelO | kiozen, cr2 http://www.geoportail.fr/ |
10:27.25 | kiozen | :) "L'initialisation de la page peut prendre un certain temps. Merci de patienter." |
10:28.26 | BabelO | kiozen :) yes, french administration take a long time to answer you |
10:29.14 | BabelO | kiozen there is IGN maps available like this and some other funny thing for marine and snow in 3D |
10:32.51 | cr2 | BabelO: Merci d'accepter les cookies |
10:33.12 | BabelO | lol, tracking you |
10:33.44 | cr2 | BabelO: isn't IGN using the lambert conformal conical projection for their stuff ? |
10:33.55 | cr2 | BabelO: can be a tough case for kiozen :) |
10:34.07 | BabelO | cr2: yes that is |
10:34.52 | kiozen | cr2: let's reproject it to mercator :D |
10:35.41 | cr2 | kiozen: i think the problem is how to enter the GCPs in a right way. |
10:35.56 | cr2 | not the gdalwarp itself. |
10:36.16 | cr2 | to minimize the warp errors |
10:43.46 | BabelO | cr2: lol, so easy, i like the error measure http://fr.wikipedia.org/wiki/Projection_de_Lambert -> 2,3 m/km à Dunkerque, 0,60 m/km à Marseille, usually at Marseille it is always bigger number ( french joke ) :) |
10:46.48 | cr2 | BabelO: ok, now i know why i like the mercator projection :) |
10:57.36 | *** join/#htc-linux patoche (n=pat@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
11:00.19 | cr2 | BabelO: but these parameters are for the IGN maps only. |
11:02.16 | BabelO | cr2: i don't understand why we are using that :( i can understand for SECAM vs PAL ( image is better ) |
11:03.00 | cr2 | ? |
11:03.18 | cr2 | PAL is better. |
11:03.32 | BabelO | nooo |
11:03.41 | cr2 | i think it has historical, and political reasons. |
11:03.45 | kiozen | where is popcorn?! |
11:03.53 | cr2 | lol |
11:04.09 | kiozen | ok, got it, you may start |
11:04.11 | cr2 | kiozen: ok, how should i reference this map http://mapy.mk.cvut.cz/data/Finsko-Finlandia/Karjala/cd1/kartat/yleiskartta_2000000/Suomi_Ita-Karjala.jpg |
11:04.55 | kiozen | cr2: on a quiet boring Sunday afternoon |
11:04.56 | cr2 | the phi1 and phi2 parameters are not obvious to me here. |
11:05.04 | kiozen | because you have to set all gcps by hand ;) |
11:05.41 | cr2 | kiozen: i'd claim that 2 points are enough. |
11:06.10 | cr2 | if you know the projection parameters used. |
11:06.19 | kiozen | only if you add lambert projection to the grid tool |
11:06.42 | cr2 | maybe 4 just to do some oversampling. |
11:07.03 | cr2 | imho, it should be the same as GK. just a different projection. |
11:09.52 | cr2 | kiozen: now the scalebar is more or less ok :) |
11:10.27 | kiozen | phaaa "more or less", it's perfect for a scale bar ;) |
11:11.00 | kiozen | I should backport that to qlandkarte |
11:11.21 | kiozen | I always wonder why no one wined so far |
11:12.24 | kiozen | cr2: is it possible to make gpsd to push data to telnet console? |
11:18.14 | cr2 | kiozen: it's 1pixel off on my 1.69m/pix map :) |
11:18.59 | cr2 | kiozen: probably because the people are used to the garmin's useless scalebar ;) |
11:19.15 | cr2 | push data ? |
11:20.17 | cr2 | bbl |
11:25.31 | BabelO | kiozen: lol, was looking for a merge tool, i found a good good one ;) |
11:28.22 | *** join/#htc-linux patoche (n=patoche@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
11:52.17 | kiozen | BabelO: merge tool? |
11:52.36 | BabelO | kiozen: yes, araxis merge ;) |
11:52.44 | *** join/#htc-linux raph_ael (i=raphael@kikoolol.orbus.fr) |
11:52.46 | raph_ael | hello |
11:53.05 | BabelO | hello raph_ael |
11:53.13 | kiozen | BabelO: winmerge? |
11:53.29 | kbingham | BabelO: kdiff3 :) |
11:53.57 | BabelO | kiozen: beurk , araxis merge is even better, can compare directory , file, also can compare tiff file :) |
11:54.30 | kiozen | compoare directory is ok too for winmerge |
11:54.38 | BabelO | kbingham: i did not try this one, kompare under linux is ok, but cannot edit file while merging, and merge is approximative |
11:55.35 | kbingham | BabelO: kdiff3 lets you edit during merge, and compare directories. I'm gonna go try the one you tried now :) |
11:55.41 | kiozen | the only bummer for winmerge is the win in the name, but it's at least os |
11:56.10 | kbingham | kiozen: i thought winmerge only ran on windows... is there linux port ? |
11:56.12 | BabelO | kbingham: i have to try kdiff3 now, araxis merge is not stable under wine :( |
12:00.34 | kiozen | kbingham: no, that is the bad part of it |
12:09.48 | kiozen | cr2: currently you have to poll information on gpsd |
12:10.13 | kiozen | cr2: except 'r' (raw), that is like NMEA directly |
12:10.19 | BabelO | kbingham: yes kdiff3 is ok for me good ;) |
12:10.39 | kiozen | cr2: I wonder if I can get all relevant data ever y second without requesting it |
12:12.06 | patoche | is kdiff3 a good tool to compare 2 kernel source tree ? |
12:18.50 | kiozen | afaik kdiff3 and kompare are based on the output of the diff command |
12:19.17 | kiozen | and that is not quite optimal |
12:20.23 | kbingham | it does do a 3 way merge |
12:20.49 | kbingham | thats what I used it for - to merge to kernel trees which had a common ancestor |
12:21.18 | patoche | oki thks |
12:21.43 | kbingham | hehe i just re-read that .... i think it would be hard to find two linux kernel trees without a common ancestor :) hehe ... but i'm sure you konw what i mean :) |
12:21.51 | *** join/#htc-linux zoolooc (n=lucian@nrbg-4dbfa788.pool.einsundeins.de) |
12:22.45 | patoche | ok it's just for comparing 2 2.6.23 kernel, one booting and other no booting |
12:23.14 | patoche | git cant compare 2 branchses ? |
12:44.52 | cr2 | kiozen: we can patch an alarm() into gpsd |
12:58.44 | zoolooc | hi cr2 |
13:00.04 | zoolooc | cr2: did you hear swetland saying anything promising for msm7200 (you know well, not the -"A") kernel support lately? |
13:12.46 | cr2 | zoolooc: no. only dzo makes some progress |
13:15.10 | pH5 | oh cool, we have a kaiser kernel hacker now? |
13:18.59 | cr2 | pH5: not the kaiser, but msm7200 |
13:19.06 | cr2 | sorry, msm7500 |
13:19.24 | cr2 | but it's the same non-phone device |
13:25.04 | zoolooc | cr2: that's also good to hear, didn't know either that dzo is hacking the msm7200 |
13:30.14 | cr2 | kiozen: btw,they don't whine about the scalebar, but about the TYP file support. i thought there was a description of this format ? |
13:31.45 | kiozen | typ files are tought, This is completely broken stuff by Garmin. There are better ways to waste time |
13:34.33 | kiozen | btw ported the scale to original qlandkarte |
13:50.35 | cr2 | ok |
13:51.28 | evilrox | 'morning |
13:51.37 | evilrox | 'morning cr2 :) |
13:51.39 | cr2 | btw, the libgarmin tools are a bit broken. there is the nod data parser code, but it's not used by any tools :( |
13:51.48 | cr2 | hi evilrox |
13:56.15 | kiozen | libgarmin, oh yes, one day when I have grown old I will play with that, too |
14:00.00 | cr2 | the oneway is know, it only the turn restrictions that i'm missing |
14:00.21 | cr2 | hehe, 's' disappeared |
14:00.46 | kiozen | s? |
14:01.24 | cr2 | from my keyboard :) |
14:03.03 | kiozen | ok, it already went for the weekend.. |
14:22.17 | pH5 | eek, whytf doesn't BA survive enabling the mmu on my 2.6.25 kernel |
14:22.25 | pH5 | is there anything wrong with this: http://en.pastebin.ca/960825 |
14:26.07 | cr2 | pH5: the coprocessor is black magic for me. |
14:27.12 | cr2 | there are some cache flushes, and nop sequences. |
14:27.53 | pH5 | too bad, same here. |
14:28.01 | pH5 | 2.6.25 can be compiled with both magician and ba support at the same time. it only boots on magician though. |
14:28.27 | cr2 | funny |
14:28.47 | cr2 | so you have the htc-egpio driver for it ? |
14:29.02 | cr2 | then i may check the n560 too. |
14:29.57 | *** join/#htc-linux ymerejt (n=jerry@ip-131.net-89-3-221.rev.numericable.fr) |
14:31.40 | pH5 | the magician patches up to htc-egpio are on linux-arm-kernel |
14:31.46 | pH5 | http://marc.info/?l=linux-arm-kernel&m=120612618815594&w=2 is what I'm currently using |
14:35.16 | cr2 | pH5: nice. i wish we'd have cleaned the asic3 driver in the same way. |
14:35.41 | cr2 | hmm. that means i can compile 2.6.25 for athena too. |
14:36.57 | cr2 | at least the asic3-gpio part. |
14:37.48 | pH5 | cr2: I'd be happy to work on that if only I could get past that low-level code into blueangel_init() ... |
14:39.35 | cr2 | pH5: i'd like to write a small memo about cp14 and cp15 for myself too. there are not that much things that are really used there. |
14:41.28 | cr2 | pH5: btw, Marex said that beetles uses this mysterious FlashWP_VPP_ON bit on asic3 |
14:41.47 | cr2 | http://wiki.xda-developers.com/index.php?pagename=ASIC3 |
14:43.28 | cr2 | i've also ported the pasic[23] dumper to mainline haret. |
14:48.44 | pH5 | the whole 0xf00/0x780 space on asic3 contains only this one flash_vpp pin? |
14:48.52 | pH5 | is it used for nand or nor? |
14:50.03 | pH5 | thanks for the pasic[23] dumper - too bad the really interesting open questions (how do the gpios work on that chip) are not answered in the wince code, both ba and ma only have some simple initial setup during boot and then leave it at that. |
14:56.22 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
14:57.58 | dcordes_ | hi all |
14:59.43 | dcordes_ | pH5, do you have asic3 working in 2.6.25?? |
15:01.37 | cr2 | pH5: the compiled version haret-w.exe is at jornada820.sf.net/files/haret. waiting for Kevin2 to appear and apply the patches. alpine and himalaya also use pasic, and there may be some more data about the 0x10-0x14 math there afair. |
15:10.35 | pH5 | hm. memory checker says nothing in the bootloader writes to 0x92..., so my boot problems shouldn't be caused by memory corruption either. |
15:10.58 | pH5 | cr2: I might be wrong, but I believe there is nothing interesting there. Just HTC's accessor functions were a bit overcomplicated |
15:11.26 | pH5 | it's just an 8bit offset register with a read/write highest bit. |
15:13.01 | pH5 | dcordes_: no |
15:28.04 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
15:45.26 | *** join/#htc-linux Sliss (n=chatzill@212.71.15.163) |
15:45.55 | Sliss | hi... I an trying to boot into linux but nothing happens |
15:48.46 | Sliss | sd card is setup like in the manual http://handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux |
15:49.30 | Sliss | is there something special that will tricker this boot I still need to do? |
15:55.10 | dcordes_ | Sliss, what did haret say? |
16:02.29 | dcordes_ | Sliss, do you see kernel messages showing or nothing at all? which image did you download? |
16:02.49 | dcordes_ | doubble check your first partition being fat16 and your second ext2 |
16:03.11 | dcordes_ | have to leave bbl |
16:04.26 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
16:05.35 | Sliss | haret tells me: on Run> cannot open script file \Storage Card\linux\default.txt |
16:06.00 | Marex-notebook | darn |
16:06.05 | Marex-notebook | hi all |
16:06.08 | *** join/#htc-linux p3t3r__ (n=p3t3r__@wlan.net-you.de) |
16:06.37 | Sliss | and it found machine Blueangel |
16:07.10 | Sliss | oops partitions wrong... fat32 and ext3 must be a habit |
16:10.54 | dcordes_ | Sliss, I always use fat16 32 might also work don't know. default.txt has to be in the same folder has haret.exe |
16:11.21 | Sliss | it is |
16:11.27 | Sliss | ...was ;-) |
16:11.31 | dcordes_ | it's a script with variables telling haret how to boot |
16:12.47 | Sliss | are you sure about ext2? |
16:12.55 | Sliss | ext3 is in the manual |
16:13.24 | dcordes_ | depends on what filesystem support is compiled in your kernel |
16:19.37 | pH5 | Sliss: ext2/ext3 is not a problem until at least linux started. |
16:19.57 | pH5 | it will tell you (with a kernel panic) if it can't mount the root file system |
16:21.09 | Sliss | I am repartitioning |
16:43.46 | Sliss | ok it is booting :))) |
16:43.51 | Sliss | FINALLY |
16:45.46 | Sliss | login promt... hmmm |
16:49.02 | Sliss | what user and password do I support to be using? |
16:50.46 | pH5 | angstrom/openmoko dev image? root and empty password |
16:51.19 | Sliss | angstrom |
16:54.48 | Sliss | but it said login incorrect |
16:55.26 | Sliss | openmoko dev? |
16:56.36 | Sliss | anyway... hope I can login soon... weekend is stating... |
16:59.11 | Sliss | pH5: any last suggestion? |
17:02.16 | *** join/#htc-linux JohnnyK (i=johnnyk@nfx-nat-229.pilsfree.net) |
17:16.32 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
17:35.09 | *** join/#htc-linux pof_ (n=pof@62.57.156.236.dyn.user.ono.com) |
17:45.50 | *** join/#htc-linux LunohoD_ (n=alex@e180074167.adsl.alicedsl.de) |
17:54.04 | *** join/#htc-linux pof_ (n=pof@62.57.156.236.dyn.user.ono.com) |
18:11.07 | *** join/#htc-linux CVirus (n=GoD@196.205.191.81) |
18:11.53 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfa788.pool.einsundeins.de) |
18:13.48 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
18:18.59 | *** join/#htc-linux drcode (n=user1@85.65.12.156.dynamic.barak-online.net) |
18:20.04 | *** join/#htc-linux TimRiker (n=timr@99.204.201.43) |
18:32.54 | BabelO | cr2 or pH5 when i do a cat /proc/iomem i got a segfault, what can cause this ? |
18:39.16 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
18:45.12 | *** join/#htc-linux Robwoerle (n=bob@M8242.m.pppool.de) |
18:48.25 | *** join/#htc-linux snoopdogg__ (n=snoopdog@f048005021.adsl.alicedsl.de) |
18:49.23 | *** part/#htc-linux p3t3r__ (n=p3t3r__@wlan.net-you.de) |
18:49.47 | *** join/#htc-linux jeebster (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
18:59.39 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
19:01.06 | cr2 | BabelO: dmesg ? |
19:01.38 | cr2 | BabelO: wrong platform_data or something like that |
19:03.04 | *** join/#htc-linux diogene31_ (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
19:03.53 | BabelO | cr2: this is what i get in my dmesg http://pastebin.ca/961192 and cat /proc/iomem segfault |
19:05.55 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
19:07.09 | *** join/#htc-linux patoche_ (n=patoche@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
19:07.12 | cr2 | this is already a bug here |
19:07.13 | cr2 | [ 169.850000] ManufacturerID:41 Len:43 Data:X100TI Teszos��;��?˷�o���;d�/�e������+�Ã���Rl��z��ڪR(��B4+ |
19:07.27 | cr2 | looks like a sprintf buffer overflow |
19:07.46 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
19:13.45 | BabelO | cr2: yes, i m tracking one by one |
19:22.48 | *** join/#htc-linux patoche (n=patoche@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
19:24.26 | cr2 | BabelO: what is the right way to suspend a device ? |
19:24.41 | BabelO | cr2: apm -s ? |
19:25.16 | BabelO | else echo mem > /sys/power/state |
19:25.30 | cr2 | yes, /sys/power/state |
19:25.38 | cr2 | apm is not always there. |
19:26.06 | BabelO | you can cat /sys/power/xxx and it tell you available suspend |
19:26.34 | cr2 | something is broken. |
19:28.54 | cr2 | BabelO: and what is the right way to tell syslog to log into /var/log ? |
19:29.19 | cr2 | LOGFILE |
19:29.35 | BabelO | cr2: /etc/syslog.conf first line set it to file instead of buffer |
19:31.20 | cr2 | yes, it's already there |
19:31.30 | cr2 | but the log is not appended ? |
19:31.43 | BabelO | cr2: restart syslogd service |
19:32.01 | BabelO | i do it yesturday evening, was working :) |
19:33.19 | cr2 | ROTATESIZE=1024 |
19:36.47 | cr2 | i need to read the pxa27x manual. probably i misunderstand something ;) |
19:39.32 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
19:40.28 | Raven_coda | I need some help understanding why my kernel is not booting. I confrem the kernel makes it to start_kernel in main.c |
19:41.02 | Raven_coda | I have a route to slowly write white pixels to the screen and slowly fill it up |
19:41.32 | Raven_coda | problem is that it starts filling up the screen but freezes half way thorugh |
19:44.13 | Raven_coda | anyone have ideas why it would freeze up |
19:44.39 | Raven_coda | once it freezes screen fades to white the softresets |
19:44.45 | Raven_coda | *then |
19:46.10 | pH5 | Raven_coda: what device? |
19:46.15 | Raven_coda | htc-wizard |
19:47.09 | pH5 | hm, wizard doesn't have a split framebuffer.. |
19:47.15 | pH5 | memory corruption? |
19:48.08 | pH5 | maybe a lock-up and watchdog timeout, but it's probably unrelated to the frame buffer filling routine |
19:48.27 | Raven_coda | yeah I doubt it's my code causeing it |
19:48.56 | Raven_coda | I put that code in there to see if it was something that caused the kernel to crash after so much time |
19:49.04 | *** join/#htc-linux pH5_ (n=ph5@p5485C9EF.dip.t-dialin.net) |
19:49.30 | Raven_coda | so how would I go about test for the above? |
19:55.41 | diogene31_ | pH5_: Maybe lockup in irq handling, spinlock doubly acquired, ... could be worth trying disabling interrupts and restart the pixel fill test ... |
19:56.39 | Raven_coda | at the beging of start_kernel arn't interrupts already disabled |
19:57.08 | Raven_coda | I thought about 10 lines into start_kernel() they get enabled |
19:57.25 | pH5_ | maybe play with the timing - is it always half the screen, even if you busy-loop between pixels? |
19:57.43 | pH5_ | or explicitly disable the watchdog timer if it's not the secure watchdog |
19:58.13 | Raven_coda | it's always after x time I can change the speed my pixels are draw |
20:03.49 | cr2 | pH5_: can we create some wiki page about mcr p14, * and mcr p15, * ? |
20:04.38 | cr2 | i'm trying to debug the wakeup of a really strange bootloader. |
20:06.42 | Raven_coda | pH5, thx I'll looking into disabling he WDT |
20:07.27 | cr2 | Raven_coda: on which machine ? |
20:07.38 | cr2 | hmm. one more surprise. |
20:08.01 | Raven_coda | htc-wizard |
20:08.03 | cr2 | 0x201000 and not 0x1000 offset ? |
20:08.16 | cr2 | Raven_coda: ok. watchdog is evil :) |
20:08.45 | Raven_coda | that's what it's looking like, looking at OMAP850 docs I think it's secure |
20:09.45 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
20:10.06 | pH5 | cr2: like copying some pages of the arm architecture reference manual? |
20:10.39 | pH5 | the patch I posted earlier works just fine on hh.org kernels. but on 2.6.25 it just hangs during the mmu enable sequence. |
20:11.23 | cr2 | pH5: no, the mdoc-g4 control registers in the ipl. |
20:11.47 | cr2 | it seems i can't avoid loading the kernel at +2MB offset in SDRAM ;) |
20:12.03 | cr2 | do i need to modify haret for it ? |
20:18.45 | cr2 | e3a0bb01 |
20:21.44 | cr2 | very strange |
20:29.04 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
20:31.21 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
20:33.50 | *** join/#htc-linux hollo_ (n=hollo@3e6b025d.rev.stofanet.dk) |
20:42.08 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
20:47.03 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
21:06.04 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
21:10.10 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfa788.pool.einsundeins.de) |
21:19.07 | *** join/#htc-linux patoche (n=patoche@lns-bzn-20-82-64-0-32.adsl.proxad.net) |
21:20.19 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
21:25.04 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
21:26.39 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfa788.pool.einsundeins.de) |
21:46.17 | *** join/#htc-linux pof (n=pof@62.57.156.236) |
21:47.00 | *** join/#htc-linux patoche_ (n=patoche@lns-bzn-53-82-65-38-253.adsl.proxad.net) |
21:49.25 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-77-27-47.dynamic.dsl.as9105.com) |
22:05.10 | *** join/#htc-linux patoche (n=pat@lns-bzn-53-82-65-38-253.adsl.proxad.net) |
22:05.18 | k3asd | b.notte |
22:18.16 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
22:21.21 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
22:21.21 | *** join/#htc-linux disturbedsaint (n=simon@84-105-33-111.cable.quicknet.nl) |
22:36.59 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
22:45.31 | *** join/#htc-linux patoche (n=patoche@lns-bzn-53-82-65-38-253.adsl.proxad.net) |
22:50.33 | *** join/#htc-linux Marex (n=marex@gwfm10-3-250.802.cz) |
22:54.53 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
22:59.28 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
23:07.08 | *** join/#htc-linux edison (i=oystein@homelien.no) [NETSPLIT VICTIM] |
23:07.43 | *** join/#htc-linux edison (i=oystein@homelien.no) [NETSPLIT VICTIM] |
23:20.30 | *** join/#htc-linux pof (n=pof@62.57.156.236.dyn.user.ono.com) |
23:38.02 | *** join/#htc-linux LunohoD_ (n=alex@e180067128.adsl.alicedsl.de) |
23:39.15 | *** join/#htc-linux pof_ (n=pof@81.184.114.62) |