| 00:01.13 | Traveler0 | ah, from the sounds of it 7200 and 7200A aren't exactly sisters |
| 00:01.58 | Traveler0 | dzo, is the work you've done avalable somewhere? |
| 00:08.17 | cr2 | Traveler0: check the logs |
| 00:13.11 | tsdogs_ | cr2: finally got there |
| 00:14.14 | tsdogs_ | what's the command? dump pxa27x ? |
| 00:14.43 | cr2 | yes |
| 00:15.00 | tsdogs_ | ine 2: No dumper pxa27x available, see HELP DUMP for a list |
| 00:18.12 | cr2 | tsdogs: gnu-haret |
| 00:18.57 | tsdogs_ | ok |
| 00:21.36 | tsdogs_ | cr2: gnu-haret version? |
| 00:21.46 | tsdogs_ | gnu-pxa? |
| 00:25.42 | tsdogs_ | cr2: a link? |
| 00:28.40 | tsdogs_ | cr2: finally I made it :) http://www.pastebin.ca/953348 |
| 00:30.24 | cr2 | tsdogs: only UHCHR : CGR on |
| 00:30.46 | cr2 | is the usbserial on ? |
| 00:30.50 | tsdogs_ | cr2: huh? |
| 00:30.54 | tsdogs_ | cr2: no wifi |
| 00:31.10 | tsdogs_ | want usbserial on he? |
| 00:32.02 | cr2 | yes. |
| 00:32.13 | cr2 | i'm looking at the source now. |
| 00:33.50 | tsdogs_ | hmm if I connect the cable wifi goes off :( |
| 00:36.39 | cr2 | wince ;) |
| 00:37.27 | tsdogs_ | cr2: yes :) even if I put a fixed ip on the hostr-ndis I still cannot ping :( |
| 00:37.49 | cr2 | ok. |
| 00:37.49 | tsdogs_ | ip shold be 169.254.2.1 |
| 00:38.08 | cr2 | kiozen: found a very annoying bug in GT |
| 00:38.35 | tsdogs_ | hmm maybe I know why |
| 00:46.18 | tsdogs_ | cr2: http://www.pastebin.ca/953365 |
| 00:46.29 | tsdogs_ | this one still via wifi but cable connected |
| 00:48.34 | tsdogs_ | hmm, seems to be same as before... |
| 00:49.34 | *** join/#htc-linux patoche (n=patoche@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 00:49.37 | *** join/#htc-linux patoche (n=patoche@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 00:52.04 | cr2 | ok. |
| 00:52.54 | cr2 | the kernel code is ok too. |
| 00:54.53 | tsdogs_ | ok so kernel suspend should be ok |
| 00:56.09 | cr2 | yes. |
| 00:57.29 | tsdogs_ | ok, so if we power off all that's not needed with sys/class/power whatever the phone should simply suspend? or we should suspend to ram too ? |
| 00:57.45 | tsdogs_ | probably a stupid question, but I really have no idea :/ |
| 00:58.37 | tsdogs_ | ha, hinge is turning off the lcd/backlight now, so only rotation needed :) |
| 00:58.38 | cr2 | we don't have swap |
| 00:58.49 | cr2 | it's a software problem |
| 00:59.10 | tsdogs_ | cr2: :) I have it on SD |
| 00:59.28 | tsdogs_ | I needed it to debug qtioia |
| 00:59.38 | tsdogs_ | s/qtioia/qtopia |
| 00:59.41 | cr2 | there was some problem with the asic3 gpio direction, and the luminance sensor |
| 01:00.02 | cr2 | the ram is refreshed at suspedn. |
| 01:02.15 | tsdogs_ | ok, I'll do more testing and report results, thx and good night |
| 01:03.12 | cr2 | good night |
| 02:15.03 | *** join/#htc-linux the_sys0p` (i=the_sys0@gateway/tor/x-e30049f2bf133e27) |
| 02:40.22 | *** join/#htc-linux joschkopf79 (n=joschi@92.226.128.100) |
| 03:22.04 | *** join/#htc-linux swc666 (n=no@24.143.67.18) |
| 03:48.54 | *** join/#htc-linux swc|666 (n=no@24.143.67.18) |
| 05:00.54 | *** join/#htc-linux dcordes (n=snoopdog@unaffiliated/dcordes) |
| 06:08.19 | *** join/#htc-linux TimRiker (n=timr@209-33-233-142.dsl.infowest.net) |
| 06:37.35 | *** join/#htc-linux lpotter (n=ljp@c210-49-127-23.rochd1.qld.optusnet.com.au) |
| 09:11.25 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 10:00.41 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
| 10:07.54 | *** join/#htc-linux CVirus (n=GoD@82.201.178.6) |
| 10:11.19 | *** join/#htc-linux JohnnyK_ (n=johnnyk@area1-98-gw.hkfree.org) |
| 10:23.57 | *** join/#htc-linux patoche (n=pat@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 10:25.25 | *** part/#htc-linux patoche (n=pat@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 10:43.11 | BabelO | hi |
| 10:45.47 | *** join/#htc-linux JohnnyK_ (n=johnnyk@area1-98-gw.hkfree.org) |
| 10:51.40 | *** join/#htc-linux rmoravcik (n=rmoravci@78.98.50.8) |
| 11:00.36 | *** join/#htc-linux par (i=par@dipole.idlepattern.com) |
| 11:02.34 | *** join/#htc-linux pH5 (n=ph5@p5485C587.dip.t-dialin.net) |
| 11:08.21 | *** join/#htc-linux patoche (n=patoche@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 11:32.00 | BabelO | pH5: i just retry bootmenu, and same than you, it say starting new kernel and bye.. that all |
| 11:32.05 | BabelO | btw hi pH5 |
| 11:37.23 | *** join/#htc-linux Heini61 (n=heini66@A30a1.a.pppool.de) |
| 11:57.01 | *** join/#htc-linux patoche (n=patoche@lns-bzn-44-82-249-207-230.adsl.proxad.net) |
| 12:04.46 | Heini61 | hi, trying to boot http://www.linuxtogo.org/~htcpxa/htcmagician/images/OpenMoko/openmoko.linux.rootfs.tar.bz2 on my magican, but it won't boot because it fails to find the filesystem on my sd. :/ anybody abel to give me a little hint? or may a newer image? ;) |
| 12:05.19 | BabelO | hi Heini61 |
| 12:05.30 | Heini61 | ;) high there! |
| 12:05.32 | BabelO | Heini61: is your filesystem ext2 ? |
| 12:05.37 | Heini61 | ext3 |
| 12:05.50 | Heini61 | on sec partition |
| 12:07.10 | Heini61 | has it to be a ext2? thought i read about it has to be a ext3 |
| 12:08.06 | BabelO | Heini61: ok, no problem , and your command line ? in txt file |
| 12:09.58 | Heini61 | last before busybox mesage: |
| 12:09.58 | Heini61 | Mounting SD card |
| 12:09.59 | Heini61 | No previous root filesystem found |
| 12:09.59 | Heini61 | FAIL |
| 12:09.59 | Heini61 | Root filesystem not found |
| 12:13.42 | Heini61 | is there a way to log the boot via terminal to another device? |
| 12:13.56 | Heini61 | as i do with my routers? |
| 12:15.36 | BabelO | Heini61: don't know, did you try with only one partition ? maybe you have to wait pH5 or goxboxlive |
| 12:16.43 | Heini61 | no, havn't tried with a single partition. will do so. |
| 12:19.42 | Heini61 | is there anybody here working on the openmoku image for the htc? |
| 12:20.03 | Heini61 | or is ther another distro i could try? |
| 12:20.30 | BabelO | Heini61: ah, maybe it is the live image, you have to put exe and image file at root of your vfat sd card |
| 12:20.42 | cr2 | hi BabelO |
| 12:20.47 | BabelO | hi cr2 |
| 12:21.01 | Heini61 | it boots up already.so the loader is working. |
| 12:21.10 | Heini61 | kernel boots up okay. |
| 12:21.22 | BabelO | cr2: i read the kiozen publication about Qlandkarte M :) |
| 12:21.40 | BabelO | s/M/GT/ |
| 12:22.13 | BabelO | Heini61: try like i say, both file on root of your sdcard |
| 12:22.24 | Heini61 | k. |
| 12:23.42 | cr2 | BabelO: i've lost some data because of a bug there, but it's not critical. |
| 12:24.41 | BabelO | cr2: the part i like is the one to scan maps, it is a nice feature, and hard to find on free software |
| 12:25.30 | *** join/#htc-linux p3t3r__ (n=p3t3r__@gate1.net-you.de) |
| 12:26.21 | cr2 | BabelO: you can use qgis, but this part is a bit unfinished there, so you need to know a lot to work around the deficiencies. |
| 12:28.07 | cr2 | i use both, GT is more end-user oriented, qgis is general purpose GIS. |
| 12:31.17 | BabelO | cr2: i think i have to learn LFS, oe still not work for me :( each time i reinstall from scratch, i ve a new error |
| 12:46.08 | BabelO | Heini61: does it works ? |
| 12:51.15 | Heini61 | Babel0: i tryed to extract filesystem again to the sd. thought, may i did a mistake there. now going to but both together on a single partition. but if i extract the image, i loose the links on a fat sd. i'll have to formate it fat, so that phone can see the linloader.exe... or am i complete on a wrong way? |
| 12:52.07 | BabelO | Heini61: don't extract filesystem , just set it at same place than exe on your root sd |
| 12:52.12 | BabelO | and start the exe file |
| 12:52.38 | Heini61 | the complete tar file? |
| 12:52.51 | BabelO | the two file like this |
| 12:55.42 | *** join/#htc-linux Marex (n=marex@gwfm10-3-250.802.cz) |
| 12:59.12 | Heini61 | seems to work !!! ;) thxs! |
| 12:59.44 | Heini61 | it's creating the rootfs. |
| 13:00.17 | dcordes | hi |
| 13:08.32 | Heini61 | FUCK !!! IT IS UP !!! GREAT WORK GUY'S !!! |
| 13:08.47 | swetland | yawns |
| 13:08.51 | BabelO | lol |
| 13:08.58 | BabelO | hello swetland |
| 13:09.02 | swetland | 'morning folks |
| 13:11.14 | cr2 | hi swetland |
| 13:11.40 | cr2 | swetland: dzo has managed to boot linux on 7200 |
| 13:12.13 | swetland | awesome. sorted out the VIC differences? |
| 13:12.39 | cr2 | yes, to some extent as i can see from his code |
| 13:12.55 | cr2 | what is really needed now is the SD driver :) |
| 13:13.06 | swetland | sadly the best I can say on that is still "soon" |
| 13:13.14 | swetland | though more soon than last time people asked |
| 13:13.29 | cr2 | i can grep in the logs for the VIC patch |
| 13:13.30 | cr2 | ok |
| 13:14.18 | dcordes | hi dzo |
| 13:14.33 | dcordes | any material you want me to test? |
| 13:14.36 | swetland | I'm trying to be a bit more regular about pushing changes to git.android.com. it's not quite an automatic process yet |
| 13:15.15 | cr2 | swetland: [19:43:41] <dzo> hi, i've put my msm patches at http://cs-alb-pc3.massey.ac.nz/diffs, these are against the 2.6.23 android tree |
| 13:16.30 | swetland | I think the biggest pain is going to be that we're working against a future (not yet shipped) version of AMSS, so in addition to some minor hardware differences, the shared memory situation for existing devices using the older shipping AMSS is also going to be an adventure |
| 13:17.43 | cr2 | making it work as a PDA is the first step, then we can think about the ipc. |
| 13:17.53 | swetland | nods |
| 13:24.18 | swetland | no exposed serial port on that thing? |
| 13:24.58 | cr2 | no. |
| 13:25.06 | cr2 | BT is behind the ipc. |
| 13:25.22 | cr2 | for whatever reason. |
| 13:25.38 | cr2 | and there is no IR. |
| 13:25.51 | swetland | ugh. pain in the ass. |
| 13:26.09 | cr2 | yeah. |
| 13:27.08 | swetland | I got our stuff booting on n800 a while back with no serial and it was decidedly not fun |
| 13:27.21 | swetland | and that was with a kernel that (supposedly) fully supported the hardware |
| 13:27.47 | cr2 | the only way to debug something is to use the fb mapped by wince. |
| 13:28.20 | cr2 | and it's a big problem on kaiser, where the fb is mapped at the SDRAM top. |
| 13:40.21 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
| 13:43.11 | cr2 | hi tsdogs |
| 13:43.20 | tsdogs | hi cr2 |
| 13:43.25 | Pryan | hi cr2 and all |
| 13:43.38 | cr2 | tsdogs: is it possible to compile the qt4roadmap on windows ? |
| 13:43.45 | tsdogs | turning off LCD/Backlight makes universal battery life much longer |
| 13:43.46 | cr2 | hi Pryan |
| 13:44.10 | cr2 | tsdogs: LCD+bkl is the biggest power consumer. |
| 13:44.19 | tsdogs | lol, just sent an e-mail on devel list about building with visual studio |
| 13:44.29 | cr2 | Pryan: have you bought the cable already ? :) |
| 13:44.42 | Pryan | nope, maybe the next month |
| 13:44.48 | Pryan | with a SD of 4 Gb |
| 13:45.35 | tsdogs | cr2: It should be possible, though roadmap is not fully qt4, so probably it needs a different target, or use mingw to use the unix part I think |
| 13:45.55 | cr2 | tsdogs: supporting win32api wastes the limited dev resources :) |
| 13:46.00 | tsdogs | lol |
| 13:47.02 | cr2 | open and mmap can be wrapped for win32/wince. |
| 13:47.30 | cr2 | supporting the separate win32/wince codebase is obviously not feasible. |
| 13:47.54 | tsdogs | agreed so probably using mingw is best |
| 13:48.16 | cr2 | tsdogs: it may be interesting to compile the _editor for win32/wince, but only as an intermediate step. |
| 13:48.46 | tsdogs | cr2: yes, but I'd rather leave the task to somebody else :) |
| 13:48.54 | cr2 | even with the ms tools. |
| 13:49.39 | cr2 | i can try it with evc4, and need to revive the cegcc stuff. |
| 13:50.01 | tsdogs | cr2: is this request related to mails? or u have some more need? |
| 13:50.23 | cr2 | have no idea about win32. and don't have the tools anyway. |
| 13:50.27 | cr2 | not really |
| 13:50.49 | tsdogs | cr2: ok if u think it's fun, but I think your time is probably better spent on something else :) |
| 13:50.50 | cr2 | imho, it's a general trend to crosscompile the qt4 apps. |
| 13:51.10 | cr2 | to win32 and osx. |
| 13:51.33 | tsdogs | cr2: ok, I have qt4 and mingw on the PC at the office, I can give it a try :) |
| 13:51.50 | cr2 | well, even the perfectly working kernel is not very useful without the applications. |
| 13:52.42 | cr2 | i can name qgis and merkaartor as the cross-qt4 apps. |
| 13:52.53 | cr2 | merkaartor is actually developed on windows. |
| 13:52.57 | tsdogs | cr2: kde4 :) |
| 13:53.27 | cr2 | kde4 is not an app :) |
| 13:53.50 | tsdogs | I think it's a great thing to have apps available for different OS |
| 13:53.57 | cr2 | to be honest i'm only using the kwin from it . |
| 13:54.09 | cr2 | k3b is a nice app. |
| 13:54.42 | tsdogs | yep :) |
| 13:56.03 | cr2 | i wish openoffice was written with qt4 ;-) |
| 13:56.09 | tsdogs | :) |
| 13:56.29 | cr2 | the first thing i do in oo is to switch java off. |
| 13:56.41 | tsdogs | lol |
| 13:57.04 | cr2 | then it becomes much more responsive, but breaks a lot of filters. |
| 13:57.22 | cr2 | somebody with a really sick mind used java there ;) |
| 13:58.16 | tsdogs | :) |
| 14:06.03 | cr2 | hmm. now i need some junk e-mail to register on a forum. |
| 14:06.41 | tsdogs | lol |
| 14:07.14 | cr2 | BabelO: are you here ? need an expert advice :) |
| 14:08.44 | tsdogs | stupid networkmanager... how can I remove one interface from beeing polled ? |
| 14:12.09 | BabelO | cr2: i m here |
| 14:14.28 | cr2 | BabelO: i'd like to create an osm account to keep things seperate, so i need some junk one-time e-mail. |
| 14:14.51 | BabelO | eh eh |
| 14:14.57 | cr2 | :) |
| 14:15.05 | BabelO | cr2: i ve what you want ;) |
| 14:15.48 | BabelO | cr2: http://www.jetable.org/fr/index |
| 14:15.51 | *** part/#htc-linux Heini61 (n=heini66@A30a1.a.pppool.de) |
| 14:15.55 | BabelO | i use this one |
| 14:16.33 | cr2 | thanks, i knew whom to ask :) |
| 14:17.24 | BabelO | cr2: it just forward email to your main accound for a delay, you can select 1 hour or more, it is a james bond tools |
| 14:18.11 | cr2 | ok, i'll just redirect to another junk account. |
| 14:18.23 | cr2 | permanent junk. |
| 14:19.25 | tsdogs | cr2: what does this mean? |
| 14:19.27 | tsdogs | Alignment trap: qterminal (1484) PC=0x0004e8b8 Instr=0xe59c3007 Address=0x000f4c8b FSR 0x013 |
| 14:19.41 | BabelO | tsdogs: nad coding ;) |
| 14:19.50 | tsdogs | when I run it with gdb this is not happening :( |
| 14:20.54 | tsdogs | and on X86_64 this is not happening (I think) |
| 14:22.23 | cr2 | tsdogs: run objdump on qterminal, you need to find this opcode in .text '0xe59c3007', at Address=0x000f4c8b |
| 14:22.39 | cr2 | i'm not 100% sure how the address is relocated. |
| 14:23.03 | tsdogs | cr2: ok. it's some problem with cross compilation I think... |
| 14:23.27 | tsdogs | hmm, need to install objdump on device |
| 14:23.28 | cr2 | 0xb is not 4byte aligned. |
| 14:23.49 | cr2 | you can use cross-objdump |
| 14:24.27 | tsdogs | good point :) |
| 14:24.42 | cr2 | 0xb is 11. you must have some byte pointer arithmetic. |
| 14:25.57 | tsdogs | cr2: what's the right sintax of objdump ? |
| 14:26.12 | cr2 | it's not really a bug, but a non-risc coding style. on 8086 it is harmless, but on a real processor it's a cpu trap. |
| 14:26.18 | cr2 | objdump -d |
| 14:26.57 | cr2 | compile qterminal with -g, it can be helpful. |
| 14:29.23 | cr2 | so you should see this opcode at a relocated PC=0x0004e8b8 address. |
| 14:29.37 | tsdogs | cr2: http://84.18.144.44/tsdogs/qtopia/qterminal.objdump.gz |
| 14:30.46 | tsdogs | 4e8b8: e59c3007 ldr r3, [ip, #7] |
| 14:30.52 | cr2 | 4e8b8:e59c3007 ldrr3, [ip, #7] |
| 14:30.55 | cr2 | yes. |
| 14:31.08 | cr2 | what is the c++ code ? |
| 14:31.32 | cr2 | demangle the _ZN15TerminalDisplay11updateImageEv |
| 14:32.08 | tsdogs | ? |
| 14:32.17 | cr2 | TerminalDisplay::updateImage() |
| 14:32.32 | tsdogs | :) yes what dow demangle mean? |
| 14:32.32 | cr2 | don't know about Ev :) |
| 14:32.38 | cr2 | can't do it manually. |
| 14:32.45 | cr2 | c++filter ? |
| 14:32.54 | cr2 | objdump --demangke |
| 14:32.56 | cr2 | objdump --demangle |
| 14:33.08 | tsdogs | cr2: I have the source isn't that enough? |
| 14:33.38 | cr2 | the name+params are encoded=mangled in this name _ZN15TerminalDisplay11updateImageEv |
| 14:34.29 | tsdogs | hmm no --demangle option |
| 14:34.40 | cr2 | man c++filt |
| 14:35.56 | cr2 | echo _ZN15TerminalDisplay11updateImageEv | c++filt -n |
| 14:36.05 | cr2 | TerminalDisplay::updateImage() |
| 14:36.11 | cr2 | ok, so Ev is void. |
| 14:38.18 | cr2 | msvc++ uses different schema, there must be some program in wine to demangle the names. |
| 14:38.48 | tsdogs | http://www.pastebin.ca/953923 anything pops up at your exper eyes? |
| 14:39.12 | cr2 | winedump sym <sym> |
| 14:41.28 | cr2 | i think gcc will take care of that disstrU[p++] |
| 14:42.06 | cr2 | i think this is more problematic const Character* currentLine = &_image[y*this->_columns]; |
| 14:43.11 | tsdogs | ok, maybe sizeof(char) shold be used here? |
| 14:43.36 | cr2 | sizeof(char)=1 |
| 14:43.59 | tsdogs | hmm |
| 14:44.18 | cr2 | taking the addresses inside the string is not nice. |
| 14:44.38 | cr2 | this is why 'buildus' fails with utf8, btw. |
| 14:44.56 | tsdogs | bbiaf |
| 14:46.50 | JohnnyK_ | hello, I'm not sure if it is possible, but I'm trying to boot Linux with Haret on my ipaq 3850 |
| 14:46.50 | JohnnyK_ | yesterday, I built Haret from CVS, because 0.5.1 can't autodetect mtype on 3850 |
| 14:46.50 | JohnnyK_ | then I extracted zImage from Familiar jffs2 image that I downloaded, configured startup.txt and started Haret |
| 14:46.51 | JohnnyK_ | haret says Booting Linux, than some random vertical bars show on LCD and minicom doesn't print anything |
| 14:46.51 | JohnnyK_ | after reset, there is message saying 'Framebuffer overlaps with kernel destination' in haretlog |
| 14:46.51 | JohnnyK_ | is there some way to find out, what I did wrong? |
| 14:47.46 | cr2 | JohnnyK_: what is your fb address ? |
| 14:49.20 | JohnnyK_ | Video buffer at AC02227E sx=240 sy=320 mx=60 my=53 |
| 14:49.20 | JohnnyK_ | Video Phys FB=c002227e Fonts=c3376064 |
| 14:49.45 | JohnnyK_ | I can post whole haretlog at pastebin, will it help? |
| 14:50.45 | cr2 | ok, so your zimage will overwrite the FB |
| 14:51.15 | JohnnyK_ | can I make haret write zimage somewhere else? |
| 14:51.35 | cr2 | i think no. |
| 14:52.06 | cr2 | because it's always relocated to the ram start address. |
| 14:52.17 | cr2 | 0xc0000000 is case of sa11x0 |
| 14:52.45 | cr2 | can you enable the zimage crc check ? |
| 14:52.55 | cr2 | set kernelcrc 1 |
| 14:53.00 | cr2 | or something like that. |
| 14:54.12 | cr2 | random vertical bars come from zimage that is put there. |
| 14:54.28 | JohnnyK_ | complete haret log: http://pastebin.com/f1e790220 |
| 14:54.36 | JohnnyK_ | i have kernelcrc set |
| 14:54.43 | cr2 | afair the problem is not the zimage location, but the boot tags. |
| 14:54.47 | cr2 | ok. |
| 14:55.29 | cr2 | crc is ok, so it's not a problem. |
| 14:56.18 | cr2 | do you have a correct mtype ? |
| 14:56.30 | cr2 | set mtype NNN |
| 14:56.41 | cr2 | that matches the zimage |
| 14:57.15 | JohnnyK_ | I'm not sure how to find out |
| 14:58.18 | JohnnyK_ | this is the message, that I found: http://www.handhelds.org/hypermail/haret/current/1424.html |
| 14:58.32 | JohnnyK_ | that is why I built haret from cvs |
| 14:59.58 | cr2 | it's good to know the mtype. |
| 15:00.56 | cr2 | 137 |
| 15:01.07 | cr2 | h3800 SA1100_H3800 H3800 137 |
| 15:01.22 | cr2 | so set it manually, and try again. |
| 15:01.59 | JohnnyK_ | that's what haret says: boot params: RAMADDR=c0000000 RAMSIZE=04000000 MTYPE=137 CMDLINE='root=/dev/ram0 ramdisk_size=12288 mem=64M console=ttyS1,115200n8 console=tty0' |
| 15:02.06 | cr2 | ok. |
| 15:02.40 | cr2 | so it's not a problem too. |
| 15:03.33 | cr2 | you have 64MB ram ? |
| 15:03.37 | JohnnyK_ | yes |
| 15:04.08 | cr2 | do you have serial console enabled in the kernel ? |
| 15:05.01 | JohnnyK_ | I'm not sure about that, it is kernel I extracted from jffs2 image from familiar 0.8.4 |
| 15:05.03 | cr2 | i'm just going through the list of all known bugs :) |
| 15:05.05 | tsdogs | <z |
| 15:05.38 | *** join/#htc-linux bernt (n=bernt@dslb-084-061-221-040.pools.arcor-ip.net) |
| 15:05.43 | tsdogs | sorry, the kid :) |
| 15:11.04 | JohnnyK_ | if there is something I could do to find, where the problem is, I'll be glad to |
| 15:15.44 | JohnnyK_ | I think I'll try to build kernel myself, to be sure that serial console is enabled |
| 15:15.58 | cr2 | JohnnyK_: i think the only possible remaining issue is the possible running DMA to some external device, which is not disabled by haret. |
| 15:16.13 | cr2 | you don't need the serial console ? |
| 15:16.20 | cr2 | console=ttyS1,115200n8 console=tty0 |
| 15:16.31 | cr2 | your console is set to the LCD now. |
| 15:16.55 | JohnnyK_ | so I should remove console=tty0, right? |
| 15:17.48 | cr2 | yes |
| 15:18.32 | JohnnyK_ | ah, I thought it'll use both of them... |
| 15:21.10 | JohnnyK_ | how long should it take before minicom starts printing kernel messages? |
| 15:25.06 | cr2 | should not be long. |
| 15:26.50 | JohnnyK_ | I only see those vertical bars and I'm not sure whether my kernel has serial console enabled |
| 15:38.02 | cr2 | the 2.6.25-rc6 patch is 10MB. |
| 16:13.51 | *** join/#htc-linux Kdecherf (n=Kdecherf@ANantes-256-1-85-189.w86-210.abo.wanadoo.fr) |
| 16:14.20 | Kdecherf | hi |
| 16:22.56 | *** join/#htc-linux patoche (n=patoche@lns-bzn-56-82-255-247-208.adsl.proxad.net) |
| 16:51.56 | *** join/#htc-linux swc|666 (n=no@24.143.67.18) |
| 16:55.32 | JohnnyK_ | cr2: so far no luck, but thank you for your help |
| 17:00.01 | swc|666 | dcordes: are you there? I have a question |
| 17:00.43 | cr2 | JohnnyK_: i simply don't have time to check haret on sa1100 |
| 17:01.12 | JohnnyK_ | ok, no problem, just wanted to say thank you :) |
| 17:01.14 | cr2 | BabelO: can i control the backlight manually through /sys ? |
| 17:02.14 | cr2 | tsdogs: ? |
| 17:03.52 | dcordes | swc|666, yes hi |
| 17:03.59 | swc|666 | hi |
| 17:04.29 | swc|666 | i read in the logs the other day that you ran a patch on the acx driver, which patch was that? |
| 17:05.13 | dcordes | swc|666, http://www.aircrack-ng.org/doku.php?id=acx&DokuWiki=c1e43ddbe6a7f0d28ee2b7b200467063 |
| 17:05.44 | swc|666 | ahhh... ok, I have tried it as well and haven't noticed any difference unfortunately |
| 17:06.02 | swc|666 | maybe slightly better |
| 17:06.33 | dcordes | I only know it ran through :) can't tell if there was change before I didn't try before. Maybe talk to #aircrack-ng or check their forums |
| 17:07.22 | swc|666 | yeah i'm on with them often |
| 17:07.42 | swc|666 | i'm thinking of putting a bounty out for a better driver |
| 17:28.27 | dcordes | can somebody hint me on how to get gprs working on BA? I searched hh.org moin but seem to not find anything |
| 17:41.16 | cr2 | hmm. backlight works |
| 17:41.35 | cr2 | <PROTECTED> |
| 17:41.50 | cr2 | wtf is pxafb ? |
| 17:45.45 | *** join/#htc-linux LunohoD_ (n=alex@e180065007.adsl.alicedsl.de) |
| 18:07.18 | cr2 | lol |
| 18:07.21 | cr2 | root@htcuniversal:~$ lsusb |
| 18:07.21 | cr2 | Bus 1 Device 2: ID 091e:0003 Garmin International GPSmap 60C |
| 18:07.57 | cr2 | kiozen: qlandkarte for arm needed :) |
| 18:09.25 | cr2 | root@htcuniversal:/media/sda1/garmin$ ls |
| 18:09.25 | cr2 | gmapsupp.img |
| 18:16.10 | *** join/#htc-linux kiozen (n=kiozen@M9615.m.pppool.de) |
| 18:16.27 | kiozen | hi all |
| 18:16.35 | kiozen | tsdogs: updated the webpage, linking to sf.net |
| 18:16.46 | kiozen | cr2: you found a bug? |
| 18:18.37 | cr2 | kiozen: yes, very annoying one. |
| 18:18.44 | kiozen | ok? |
| 18:18.55 | cr2 | i generated the gcps. |
| 18:19.01 | cr2 | loaded them |
| 18:19.15 | cr2 | moved to the right places, deleted some. |
| 18:19.18 | *** join/#htc-linux p3t3r__ (n=p3t3r__@gate1.net-you.de) |
| 18:19.24 | cr2 | run 'save' |
| 18:19.39 | cr2 | got a warning, 'file exists, save anyway?' |
| 18:19.45 | cr2 | pressed yes. |
| 18:19.49 | cr2 | was happy. |
| 18:20.11 | cr2 | after doing it for 30+ files found out that nothing is saved :( |
| 18:20.26 | kiozen | oh |
| 18:20.34 | *** join/#htc-linux CVirus (n=GoD@82.201.178.6) |
| 18:20.46 | cr2 | but the generated geotiff is there. |
| 18:20.56 | cr2 | so it's not that tragic. |
| 18:21.15 | kiozen | ok I will check |
| 18:21.25 | kiozen | have to go again, bbl |
| 18:42.53 | cr2 | kiozen: the GSOD is some internal qtopia/M fsckup. |
| 18:43.45 | *** join/#htc-linux patoche (n=patoche@lns-bzn-56-82-255-247-208.adsl.proxad.net) |
| 18:47.25 | BabelO | happy, finally console-image built... error coming from BB_NUMBER_THREADS |
| 18:47.49 | *** join/#htc-linux dcordes_ (n=snoopdog@unaffiliated/dcordes) |
| 18:49.47 | cr2 | BabelO: where do you have w100fb in /sys ? |
| 18:49.55 | *** join/#htc-linux rob_w (n=bob@Mb5a8.m.pppool.de) |
| 18:49.58 | cr2 | i can't find pxafb |
| 18:50.38 | BabelO | cr2: ib /sys/graphics i think, let me look, i ve a fresh fresh console image now |
| 18:50.45 | BabelO | have to bug OE |
| 18:52.10 | BabelO | cr2: why kexec does not works on BA ? |
| 18:52.42 | cr2 | never used kexec |
| 18:53.04 | BabelO | cr2 ok :( i have to look how it run then |
| 18:59.13 | dcordes_ | BabelO, can you use gprs on BA? |
| 18:59.30 | BabelO | dcordesyes |
| 18:59.36 | BabelO | dcordes_: yes |
| 18:59.47 | dcordes_ | is there any howto? |
| 19:00.00 | dcordes_ | I can only find ipaq instructions in hh wiki |
| 19:00.21 | BabelO | dcordes_: yes there is this one, or any other HOWTO for linux and gprs modem |
| 19:07.24 | dcordes_ | BabelO, can I use this http://handhelds.org/moin/moin.cgi/GPRS? |
| 19:08.54 | BabelO | dcordes_: better is to do like me, use google and found a generic howto for linux and your provider |
| 19:10.11 | swc|666 | BabelO: do you know if anyone has attempted or patched the acx driver for mac80211 yet? |
| 19:10.45 | BabelO | swc|666: no, don't know |
| 19:12.19 | swc|666 | I'm still having big problems to get the acx to work correctly :( |
| 19:17.46 | tsdogs | cr2: I'm back, what should I use insthead of &image[y*xyz] ? |
| 19:18.14 | BabelO | cr2: /sys/class/lcd |
| 19:18.40 | dcordes_ | BabelO, hm I can only find linux driver for vodafone device. do you have a link to the instruction you used? |
| 19:19.34 | BabelO | dcordes_: it seem it is the same that at handhelds.org , pppd must start on ttyS8 and at command send to ttyS0 |
| 19:22.16 | cr2 | tsdogs: i don't understand what this code does. |
| 19:22.38 | tsdogs | cr2: not my code comes from konsole :) |
| 19:23.13 | cr2 | konsole always was a terrible hack :) |
| 19:23.29 | cr2 | that's why i prefer using xterm. |
| 19:24.07 | tsdogs | this code handles the drawing widget for the terminal output |
| 19:56.18 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn8.78-98-50.t-com.sk) |
| 20:00.13 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn8.78-98-50.t-com.sk) |
| 20:22.25 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 20:23.38 | cr2 | tsdogs: is qtopia suspnding the LCD ? |
| 20:27.27 | tsdogs | cr2: if by suspending u mean turning off power yes, with mine an ymeryet modifications |
| 20:29.14 | tsdogs | cr2: http://git.asheesh.org/?p=qtopia_snapshot.git;a=blob;f=devices/htcuniversal/custom.cpp;h=022d9272bb02b7f0252dc7fad1117a36d8ee99b3;hb=tsdogs |
| 20:30.28 | tsdogs | hmm that one needs some modifications, remove the comments from code :) I added them to find the segfault |
| 20:34.59 | cr2 | <PROTECTED> |
| 20:35.20 | cr2 | hmm. i don't see it on n560 for some reason. |
| 20:35.32 | cr2 | <PROTECTED> |
| 20:35.51 | cr2 | i've cloned it to /sys/class/backlight/generic-bl |
| 20:36.38 | cr2 | and romved some junk from it. it can be cleaned better. |
| 20:37.16 | cr2 | tsdogs: but this will not work on w100fb ? /sys/class/lcd/pxa2xx-fb/power |
| 20:37.47 | cr2 | how can we solve this problem ? switch on mtype ? |
| 20:38.19 | cr2 | and there are button backlight leds, and the keyboard backlight led. |
| 20:39.59 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-69-13-234.dynamic.dsl.as9105.com) |
| 20:40.28 | cr2 | tsdogs: and athena/hermes will have a different video driver, because there are some major differences from w100. not they run vsfb. |
| 20:44.58 | Marex | cr2, hi |
| 20:45.08 | Marex | cr2, I patched qemu so I can watch memory writes |
| 20:45.46 | cr2 | Marex: i have gps running on n560, lcd and bkl suspend/resume |
| 20:45.57 | Marex | nice :) |
| 20:46.01 | cr2 | Marex: can you boot wince emu rom ? |
| 20:46.09 | Marex | cr2, havent tried yet |
| 20:46.36 | cr2 | Marex: i'll commit the n560 changes to hh.org |
| 20:46.42 | Marex | cr2, do you have some ROMs from devices that use pxa lcd, doesnt use diskonchip and hmm ... that should be all |
| 20:46.47 | Marex | ? |
| 20:46.50 | Marex | cr2, ok :) |
| 20:46.56 | cr2 | Marex: can you test n560 ? |
| 20:47.17 | cr2 | get magician |
| 20:47.21 | Marex | cr2, I have to learn for exam which I have on tuesday |
| 20:47.43 | Marex | cr2, do you have that one ? I was unable to find it anywhere |
| 20:47.47 | cr2 | magician uses pxa lcd, and does not have doc |
| 20:47.53 | Marex | (rom dump) |
| 20:48.11 | cr2 | testwm5 |
| 20:48.17 | cr2 | wil not help you. |
| 20:48.29 | Marex | hmm |
| 20:48.45 | Marex | wm5 roms use IPL/SPL |
| 20:49.05 | cr2 | only on docs |
| 20:49.13 | Marex | ok, I see |
| 20:49.20 | cr2 | not with pxa nor flash |
| 20:49.49 | cr2 | pH5 and goxboxlive have magician |
| 20:50.11 | Marex | cr2, I see, thanks :) |
| 20:53.38 | cr2 | is the 0.4.8 haret tagged ? |
| 20:57.08 | cr2 | yes |
| 20:57.47 | *** part/#htc-linux p3t3r__ (n=p3t3r__@gate1.net-you.de) |
| 20:58.56 | Marex | goxboxlive, ping ;) |
| 21:12.37 | cr2 | dma8 ? |
| 21:12.51 | Marex | huh? |
| 21:13.00 | Marex | cr2, btw wanna see that bootloader dump ? |
| 21:13.18 | Marex | ~50000 lines of mixed memory accesses and pxa hardware stuff |
| 21:14.07 | cr2 | sort|uniq ? |
| 21:14.59 | Marex | Im stopping to understand you |
| 21:15.25 | cr2 | heh. oops |
| 21:18.38 | cr2 | very strange. |
| 21:22.06 | BabelO | goxboxlive: or tsdogs, can you paste your /etc/ts.conf please ? |
| 21:23.12 | cr2 | BabelO: make linload is broken. |
| 21:30.49 | *** join/#htc-linux swc666 (n=no@24.143.67.18) |
| 21:45.14 | Marex | cr2, ok I checked all the beetles memory writes |
| 21:45.15 | tsdogs | BabelO: http://www.pastebin.ca/954407 |
| 21:45.29 | Marex | cr2, looks like the bootloader checks whether all hardware is in it's place |
| 21:45.32 | BabelO | tsdogs: thx |
| 21:45.33 | tsdogs | a bit late :) |
| 21:46.18 | BabelO | dcordes_: i m uploading a Qtopia test image for you with phone support |
| 21:46.35 | BabelO | dcordes_: lot of thing are to be finished |
| 21:51.14 | *** join/#htc-linux lpotter (n=ljp@c210-49-127-23.rochd1.qld.optusnet.com.au) |
| 21:54.00 | BabelO | dcordes_: http://linuxbox2.free.fr/blueangel/qtopia/ |
| 21:54.30 | *** join/#htc-linux CVirus (n=GoD@82.201.178.6) |
| 21:55.31 | *** join/#htc-linux fredrik__ (n=chatzill@f6.nl) |
| 21:58.20 | dcordes_ | BabelO, hey you read my mind :) I just tried the old qtopia image from linuxtogo |
| 21:59.56 | dcordes_ | http://linuxtogo.org/~htcpxa/htcblueangel/O.P.I.E-II/ I don't know if it's interesting but I have "No Modem" there |
| 22:04.21 | cr2 | i don't unerstand it ;) |
| 22:09.26 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf8482.pool.einsundeins.de) |
| 22:10.28 | BabelO | dcordes_: yes, very old image ;) try my link, i just miss some default init like mixer |
| 22:18.12 | dcordes_ | sd prepared.. |
| 22:20.44 | dcordes_ | BabelO, it's based on angstrom? I thought qtopia was an own kind of distro |
| 22:21.53 | BabelO | dcordes_: qtopia is just a gui |
| 22:23.45 | dcordes_ | BabelO, wow it seems to be very fluid |
| 22:24.11 | BabelO | dcordes_: yes, you see network provider ? |
| 22:24.14 | BabelO | tmobile ? |
| 22:24.43 | fredrik__ | i just booted linux on my universal for the first (and second) time. I have some trouble with the touchscreen with both the openmoko and qtopia build; anything obvious i should try to get the touchscreen working; it's kind of useless without... |
| 22:24.55 | dcordes_ | BabelO, it says Unknown : Vodafone D2 |
| 22:24.57 | dcordes_ | directly |
| 22:25.08 | BabelO | ok, so it is ok |
| 22:25.51 | BabelO | dcordes_: i forgot to set the correct asound.state :( |
| 22:26.23 | dcordes_ | BabelO, ok. display just turned dark |
| 22:26.34 | dcordes_ | ah there it is again ^^ |
| 22:27.37 | *** join/#htc-linux Babel1 (n=BabelO@lun34-2-82-238-28-28.fbx.proxad.net) |
| 22:29.04 | Babel1 | dcordes_: settings menu and power management |
| 22:31.16 | *** join/#htc-linux k34sD (n=k3asd@host-62-10-208-93.cust-adsl.tiscali.it) |
| 22:34.31 | dcordes_ | is professional in crashing BA keyboard |
| 22:35.57 | k34sD | hi |
| 22:36.34 | k34sD | Some have never installed Linux on htc artemis? |
| 22:42.09 | BabelO|mobile | k34sD: hi, i managed to boot my artemis on linux |
| 22:43.37 | k34sD | BabelO|mobile, istro that you used? |
| 22:43.41 | k34sD | distro* |
| 22:44.52 | tsdogs | fredrik__: Is wifi on when u boot? |
| 22:45.01 | BabelO|mobile | no distro at the moment ,kernel miss lot of thing and need more works |
| 22:45.15 | fredrik__ | i think so, will switch it off and retry |
| 22:45.47 | tsdogs | :) known bug |
| 22:46.13 | k34sD | BabelO|mobile, opie or gpe then it is not possible to install them? |
| 22:46.54 | cr2 | tsdogs: does the brightness sensor work for you ? |
| 22:47.06 | BabelO|mobile | k34sD: not at the moment, miss sd driver |
| 22:47.39 | cr2 | tsdogs: the non-working ts is because of somebody flooding the asic3 gpio/irq. |
| 22:48.09 | tsdogs | cr2: hmm, I think it was with opie, never tryed with qtopia (I had forgotten to have one :) |
| 22:48.41 | k34sD | BabelO|mobile, argh. htc in other models is possible. right? |
| 22:48.42 | cr2 | you can check the input device |
| 22:49.28 | fredrik__ | tsdogs: thanks ts works now |
| 22:49.35 | tsdogs | lol I tryed the lock on qtopia, but now I need to find where the * is on uni keyboard mapped :/ |
| 22:49.41 | tsdogs | fredrik__: goo |
| 22:49.48 | tsdogs | s/goo/good |
| 22:50.34 | tsdogs | hmm have to reboot anyway... |
| 22:50.44 | tsdogs | cr2: what do u need it for? |
| 22:50.53 | tsdogs | just curios |
| 22:51.45 | cr2 | tsdogs: there was an inconsistency between the old BL and wince in gpio direction. |
| 22:52.12 | cr2 | tsdogs: and some time ago this gpio bit was responsible to ts not working. |
| 22:52.21 | cr2 | s/to ts/for ts/ |
| 22:52.39 | k34sD | BabelO|mobile, Are Italian. For me it is a little difficult to speak English. I go to bed, take this speech tomorrow morning ;) night |
| 22:52.53 | tsdogs | cr2: never had problems booting in the dark |
| 22:54.50 | tsdogs | cr2: hmm, I often get this: usb 2-2: device not accepting address 18, error -62 (on pc) is it my pc fault or usbnet? |
| 22:55.26 | cr2 | imho, your pc |
| 22:55.36 | cr2 | linux driver for your pc |
| 22:55.46 | tsdogs | :) ok still acpi related thing I think |
| 22:55.53 | tsdogs | I hate my PC :( |
| 22:56.36 | tsdogs | ok now it got the usb0 device (?) |
| 22:56.59 | dcordes_ | BabelO, is there a terminal in your image? |
| 22:59.11 | tsdogs | cr2: hmm, not so sure anymore it's even mapped somewhere anymore :( |
| 22:59.15 | BabelO|mobile | dcordes_: not compiled, sorry... I try to do more next day , else ask tsdogs, he do pkg |
| 22:59.38 | BabelO|mobile | dcordes_: did you try phone call? |
| 23:00.00 | tsdogs | BabelO|mobile: is it 4.3.2? |
| 23:00.04 | dcordes_ | BabelO, I hear nothing. I tried alge's asound.stat |
| 23:00.40 | dcordes_ | but it dials very fast and nice |
| 23:00.55 | tsdogs | dcordes_: for 4.3.2 it should already be there http://84.18.144.44/tsdogs/qtopia/ |
| 23:01.05 | tsdogs | qpe-qterminal |
| 23:01.10 | BabelO|mobile | tsdogs: yes |
| 23:01.17 | tsdogs | ok |
| 23:01.30 | dcordes_ | where can I find it? |
| 23:01.42 | tsdogs | dcordes_: http://84.18.144.44/tsdogs/qtopia/ |
| 23:01.48 | BabelO|mobile | dcordes_: i look more tomorrow, else try alsamixer |
| 23:02.10 | dcordes_ | tsdogs, oh sorry I misunderstood. I though you mean it should be on the phone |
| 23:02.26 | dcordes_ | BabelO|mobile, ok. I want the terminal for alsamixer ;) |
| 23:03.06 | tsdogs | dcordes_: ok, but I have no idea on how to install pkg without a terminal :( |
| 23:03.56 | dcordes_ | I could put files in place manually. Do you know how to extract an ipk? |
| 23:04.05 | BabelO|mobile | dcordes_: tomorrow, i try to install pre network device,:like gprs, wifi, usb |
| 23:04.10 | dcordes_ | oh qpk I mean |
| 23:04.25 | dcordes_ | BabelO|mobile, gprs would be nice |
| 23:05.03 | tsdogs | hmm, not on the host, I think u need to find some doc on Trolltech or ask on #qtopia (if somebody is there) |
| 23:05.53 | tsdogs | or simply tar xvfz the file and check what it's doing :) |
| 23:06.16 | dcordes_ | oh :) |
| 23:07.08 | tsdogs | cr2: :( cannot find the device on Uni, so I guess it's not enabled... maybe goxboxlive remembers better on this one. |
| 23:11.29 | tsdogs | dcordes_: btw u also need to have a dejavu-mono font installed. |
| 23:13.12 | dcordes_ | tsdogs, where are the .desktop files supposed to go inside the qtopia filesystem? |
| 23:13.45 | tsdogs | dcordes_: qtopia4 uses sqlite no more desktop files :( |
| 23:13.49 | cr2 | src/wincmds.cpp:250: error: 'METHOD_BUFFERED' was not declared in this scope |
| 23:14.09 | dcordes_ | tsdogs, so I guess I need to fiddle with sqlite to get a terminal? :( |
| 23:14.38 | dcordes_ | s/terminal/terminal shortcut/ |
| 23:14.45 | tsdogs | there is an utility in qtopia to do that, but maybe u can play around with package manager |
| 23:16.01 | *** join/#htc-linux swc|666 (n=no@24.143.67.18) |
| 23:16.13 | BabelO|mobile | dcordes_: it is content_installer program |
| 23:17.11 | lpotter | but installable packages need desktop files for the content installer |
| 23:17.20 | tsdogs | dcordes_: u have an x86_64? |
| 23:17.29 | dcordes_ | tsdogs, no i686 |
| 23:17.50 | dcordes_ | I do have 64bit laptop cpu though but 32bit os |
| 23:17.51 | tsdogs | :( I only have a binary for x86_64 |
| 23:18.05 | dcordes_ | of content installer? |
| 23:18.17 | tsdogs | yes |
| 23:18.26 | dcordes_ | where are the sources? ^^ |
| 23:18.48 | tsdogs | http://www.handhelds.org/moin/moin.cgi/Qtopia |
| 23:19.42 | tsdogs | ./src/tools/content_installer/ |
| 23:20.12 | tsdogs | no idea on how to build only that one. |
| 23:22.46 | tsdogs | lpotter: yes. Is there a way to use package manager to install from local resources? |
| 23:23.24 | tsdogs | hi btw |
| 23:23.43 | cr2 | BthAGNetworkDialNumber |
| 23:23.53 | swc|666 | anyone know if usb host mode is possible on the Uni? |
| 23:24.14 | cr2 | swc|666: unlikely |
| 23:24.45 | swc|666 | :( |
| 23:25.31 | cr2 | swc|666: works for me on athena and n560 |
| 23:25.36 | tsdogs | cr2: unlikely cause there is no kernel support, or 'cause other thecnical reasons? |
| 23:28.00 | lpotter | tsdogs: only using a web server like boa or something |
| 23:28.29 | lpotter | unless they changed it |
| 23:28.37 | cr2 | tsdogs: no power, and unknown motherboard wiring. kernel support is there, see athena. |
| 23:29.06 | tsdogs | cr2: ok |
| 23:29.16 | tsdogs | lpotter: didn't see any change :( |
| 23:29.26 | tsdogs | thx anyway |
| 23:29.48 | cr2 | hm. i've added bth_setmode support to mainline, but it does not work :( |
| 23:30.47 | tsdogs | hmm, I'm wondering if I can make it work with simplefm... though I need to fix many things there... :) |
| 23:31.50 | cr2 | hehe. does not work with gnu-haret too. damn FSC-HTC. |
| 23:32.12 | cr2 | zero respect even for m$ standards. |
| 23:34.54 | cr2 | tsdogs: i'm porting the gnu-haret extra stuff to mainline. tired of switching already ;) |
| 23:36.11 | tsdogs | was about time, I have seen the statement "we are working on merging..." for some time now ;) |
| 23:42.10 | cr2 | irctl works. |
| 23:42.23 | cr2 | it even blocks gps, as expected. |
| 23:42.39 | *** join/#htc-linux swc666 (n=no@24.143.67.18) |
| 23:46.43 | dcordes_ | latest haret starts on omap850 based ipaq 514. I would like to try and boot some kernel but haret can't allocate memory. HaRET(7)# alloctest 1 |
| 23:46.43 | dcordes_ | Failed to lock 1 pages (code 5) |
| 23:48.20 | cr2 | alloctest fials ? |
| 23:49.58 | dcordes_ | tying to boot haret says failed to lock 1456 pages |
| 23:50.22 | dcordes_ | no matter how big kernel is in size |
| 23:50.26 | cr2 | CreateFileMapping+LockPages |
| 23:50.47 | cr2 | actually it's a politically incorrect way :) |
| 23:51.12 | cr2 | it should be VirtualAlloc+LockPages |
| 23:52.02 | cr2 | check PHYSMAPMETHOD 0 |
| 23:52.29 | dcordes_ | ok |
| 23:53.50 | dcordes_ | cr2, HaRET(46)# set PHYSMAPMETHOD 0 |
| 23:53.50 | dcordes_ | HaRET(47)# alloctest 1 |
| 23:53.51 | dcordes_ | Failed to lock 1 pages (code 5) |
| 23:55.20 | cr2 | dcordes_: are you in system mode ? |
| 23:55.35 | cr2 | pastebin the haretlog. |
| 23:55.36 | dcordes_ | cr2, what's that? my mate is in haretconsole |
| 23:55.41 | dcordes_ | early haretlog? |
| 23:59.00 | dcordes_ | cr2, he says there is nothing about system mode |
| 23:59.01 | cr2 | yes. |
| 23:59.12 | dcordes_ | log is coming |
| 23:59.26 | cr2 | what does it say on 'console' login ? |