00:13.04 | *** join/#htc-linux dcordes (n=user0815@f048008066.adsl.alicedsl.de) |
00:19.05 | aLeSD | cr2 r u here ' |
00:19.06 | aLeSD | ? |
00:19.32 | aLeSD | ok ... I'm always getting a lost sync from the LCD controller |
00:19.57 | aLeSD | now hacked the code to set the pcd++ everytime I have 20 reset |
00:20.22 | aLeSD | only to find the one that is the right one : without sync_los interruption |
00:20.32 | aLeSD | and I found the there is not |
00:21.22 | aLeSD | so I read some stuff and I understand that the sync_lost interrupt is done when |
00:21.55 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
00:22.00 | aLeSD | the controller check the first pixel of the frambuffer and it founds it wrong |
00:22.28 | aLeSD | so ... I have the conclusion that I don't have a sync problem |
00:22.54 | aLeSD | the problem is in the ... I don't know where |
00:23.59 | aLeSD | and better stuff is that at every pixel_clock I set I have always the same 10 - 20 colored lines in the same place with under the text |
00:24.12 | aLeSD | but the text is correct |
00:25.10 | aLeSD | I mean |
00:25.12 | aLeSD | help |
00:25.25 | aLeSD | I'm going crazy |
01:05.59 | LunohoD | aLeSD: try out the newer kernel |
01:07.39 | LunohoD | aLeSD: git checkout luno-upstream-debug |
01:07.50 | LunohoD | aLeSD: git cherry-pick 6b535cd871ec1a34687f4b6efb1e687b48d133b2 |
01:08.30 | aLeSD | LunohoD: I tried the luno-upstream-debug |
01:08.33 | aLeSD | it's the same |
01:08.47 | LunohoD | aLeSD :( |
01:08.53 | aLeSD | I have problem somewhere outside the omapfb driver |
01:08.57 | aLeSD | maybe the dma |
01:09.01 | aLeSD | :°°°°° |
01:09.09 | aLeSD | I'm going crazy |
01:09.51 | LunohoD | wait |
01:10.13 | LunohoD | aLeSD: luno-upstream-debug is not very good |
01:10.49 | LunohoD | aLeSD: there is too much stuff from old kernel: clock.c, for example |
01:11.31 | LunohoD | aLeSD: did you try lunohod-upstream branch? |
01:13.29 | aLeSD | LunohoD: tell me about clock |
01:13.46 | aLeSD | I have something of strange and is not the LCD I think |
01:14.35 | aLeSD | LunohoD: what is omap2 ? |
01:18.09 | *** join/#htc-linux LunohoD_ (n=alex@e180066053.adsl.alicedsl.de) |
01:21.28 | LunohoD_ | aLeSD: i dunno what is omap2 |
01:59.51 | *** join/#htc-linux LunohoD (n=alex@e180067086.adsl.alicedsl.de) |
02:32.56 | *** join/#htc-linux l33tlinuxh4x0r (n=c06843dd@gateway/web/cgi-irc/ircatwork.com/x-54bc6fcc693aba45) |
02:34.49 | *** part/#htc-linux l33tlinuxh4x0r (n=c06843dd@gateway/web/cgi-irc/ircatwork.com/x-54bc6fcc693aba45) |
03:36.53 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-400faa8668f52e23) |
04:11.37 | *** join/#htc-linux joschkop179 (n=joschi@f050250035.adsl.alicedsl.de) |
05:03.23 | *** join/#htc-linux joschkopf79 (n=joschi@f050250035.adsl.alicedsl.de) |
08:05.40 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfd611.pool.einsundeins.de) |
08:17.15 | *** join/#htc-linux goxboxlive (n=goxboxli@81.80-202-132.nextgentel.com) |
08:38.05 | *** join/#htc-linux tsdogs (n=tsdogs@84.18.144.39) |
08:48.49 | goxboxlive | hi tsdogs |
08:49.00 | tsdogs | hi goxboxlive |
09:35.01 | *** join/#htc-linux sadeness (n=viktor@unaffiliated/sadeness) |
09:39.37 | *** join/#htc-linux ymerejt (n=jerry@ip-88.net-89-3-210.rev.numericable.fr) |
09:43.51 | ymerejt | hi goxboxlive, |
09:44.05 | goxboxlive | hi ymerejt |
09:44.09 | goxboxlive | any news? |
09:44.23 | ymerejt | Always working on the kernel part |
09:44.34 | goxboxlive | What are you working on. What kind of kernel part? |
09:44.52 | ymerejt | refactoring at this time |
09:45.02 | ymerejt | phone, leds, buttons, keyboards, ... |
09:45.12 | goxboxlive | ok good |
09:45.24 | ymerejt | adding a power policy solution too |
09:45.30 | goxboxlive | great |
09:46.21 | goxboxlive | ymerejt: just so you know, if you are going to take a look at the cam driver, remember that some work allready exist in the openezx source. And for the minicam in some omap sources. |
09:49.04 | ymerejt | goxboxlive, OK, but at this time I'm just working on compo |
09:49.13 | ymerejt | nents already almost working |
09:49.18 | goxboxlive | right |
09:49.19 | ymerejt | ;) |
09:49.23 | goxboxlive | :-) |
10:06.51 | *** join/#htc-linux rob_w|laptop (n=rob_w@ip-90-186-76-158.web.vodafone.de) |
10:16.40 | *** join/#htc-linux rob_w|lappi (n=rob_w@ip-90-187-56-155.web.vodafone.de) |
10:31.06 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
10:34.12 | *** join/#htc-linux ltxda0 (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
10:55.59 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
11:12.09 | *** join/#htc-linux rob_w|laptop (n=rob_w@ip-90-187-136-210.web.vodafone.de) |
11:18.53 | *** part/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
11:21.40 | *** join/#htc-linux BabelO (n=Fabrice@2a01:5d8:52ee:1c1c:250:fcff:fe46:5573) |
11:24.35 | ymerejt | goxboxlive, i have merged my htcuniversal branch with the lastest qtopia snapshot |
11:24.45 | ymerejt | goxboxlive, it works but with some bugs |
11:25.03 | ymerejt | goxboxlive, so don't use this qtopia_snapshot ... |
11:25.24 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
11:29.45 | ymerejt | goxboxlive, how to make GPRS works ? |
11:30.04 | ymerejt | goxboxlive, I mean ttyUSB0 |
11:35.11 | tsdogs | ymerejt: what device? |
11:35.17 | ymerejt | universal |
11:35.20 | tsdogs | hi btw |
11:35.24 | ymerejt | hi too |
11:35.25 | ymerejt | ;) |
11:44.41 | ymerejt | tsdogs, have ever tried the GPRS under universal/Qtopia |
11:44.41 | ymerejt | ? |
11:45.05 | tsdogs | <PROTECTED> |
11:45.12 | ymerejt | ok |
11:45.25 | ymerejt | on hh wiki someone has written that GPRS works |
11:45.28 | tsdogs | I was looking at the logs, to see how we tryed to enable it there was some procedure |
11:45.43 | tsdogs | yes goxboxlive had it working (also UMTS) |
11:45.46 | ymerejt | I think the good device access /dev/usbdev1.63 ... |
11:46.06 | ymerejt | but I gave it to Qtopia without success |
11:46.19 | tsdogs | ymerejt: it should be ttyUSB0 as u sayd |
11:47.12 | ymerejt | maye |
11:47.15 | ymerejt | maybe it was |
11:48.59 | tsdogs | ymerejt: I think u need to modprobe something but can't find what it was |
11:49.18 | ymerejt | you're probably right |
11:49.54 | ymerejt | I think goxboxlive should know but he is not really available now ... |
11:49.56 | ymerejt | ;- |
11:49.57 | ymerejt | ;( |
11:52.15 | tsdogs | ymerejt: found it I think: modprobe usbserial vendor=0x05c6 product=0x3197 |
11:54.38 | tsdogs | bbl |
11:55.02 | ymerejt | I have /dev/ttyUSB0 and 1 now |
11:59.06 | ymerejt | tsdogs, where have you found this vendor and product parameter |
12:00.22 | ymerejt | lsusb |
12:06.44 | goxboxlive | ymerejt: hi |
12:06.48 | ymerejt | hi |
12:07.04 | ymerejt | goxboxlive, have you ever successfully used GPRS on uni ? |
12:07.09 | goxboxlive | ymerejt: |
12:07.10 | goxboxlive | yes |
12:07.16 | goxboxlive | i have had it running |
12:07.18 | ymerejt | with qtopia ? |
12:07.27 | goxboxlive | ymerejt: no, manually setup |
12:07.38 | ymerejt | ok could you tell me more ? |
12:08.29 | goxboxlive | ############## OPEN CU AND DO #################################################### |
12:08.29 | goxboxlive | atv1 |
12:08.29 | goxboxlive | ate1 |
12:08.29 | goxboxlive | at+cfun=1 |
12:08.29 | goxboxlive | at+cops=0 |
12:08.29 | goxboxlive | at+cops? |
12:08.31 | goxboxlive | #wait until it give some respond, then |
12:08.33 | goxboxlive | at@usbpower=1 |
12:08.35 | goxboxlive | ############# THEN GO BACK TO CONSOLE IN ANOTHER VIEW ########################### |
12:08.37 | goxboxlive | bash# modprobe usbserial vendor=0x05c6 product=0x3197 |
12:08.41 | goxboxlive | ############# GO BACK TO CU ##################################################### |
12:08.43 | goxboxlive | at+cgdcont=1,"IP","internet.tele2.no","",0,0 OR at+cgdcont=1,"IP","internet.tele2.no" |
12:08.45 | goxboxlive | atdt*99***1# |
12:08.47 | goxboxlive | ############# GO BACK TO CONSOLE ################################################ |
12:08.49 | goxboxlive | bash#: pon tele2 |
12:08.51 | goxboxlive | and then : try ifconfig and look for ppp0 |
12:08.53 | goxboxlive | ################################################################################ |
12:09.04 | *** join/#htc-linux Vinz0r (n=djvinz@213.219.157.111.adsl.dyn.edpnet.net) |
12:10.40 | goxboxlive | and tele2 looks like: http://pastebin.ca/863270 |
12:10.53 | goxboxlive | This is how i did it manually |
12:11.34 | goxboxlive | For me i have to use this one: at+cgdcont=1,"IP","internet.tele2.no","",0,0 and NOT liek this: at+cgdcont=1,"IP","internet.tele2.no" |
12:11.37 | ymerejt | and the data stream use ttyUSB0 and the AT dialog ttyS0 |
12:11.51 | goxboxlive | ymerejt: rigth |
12:12.02 | goxboxlive | and you get a /dev/pppo |
12:12.47 | ymerejt | qtopia does not emit any AT command when I ask it to enable GPRS ... |
12:13.14 | goxboxlive | ok |
12:14.21 | goxboxlive | ls |
12:16.50 | ymerejt | goxboxlive, but I think I have to work on the myul |
12:16.54 | ymerejt | multiplexer plugin |
12:17.13 | goxboxlive | ok |
12:20.06 | ymerejt | goxboxlive, tsdogs, tut-multiplexing.html is very interresting specialy the end ... ;) |
12:29.42 | ymerejt | goxboxlive, I have ttyUSB1 too |
12:29.52 | ymerejt | goxboxlive, what is its goal |
12:29.59 | ymerejt | goxboxlive, have you ever use it ? |
12:36.15 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
12:43.45 | goxboxlive | ymerejt: yes .But i have only have it working with ttyUSB0. Cr2 know what the other one de |
12:43.48 | goxboxlive | bbl |
12:44.58 | *** join/#htc-linux rob_w|laptop (n=rob_w@ip-90-186-32-37.web.vodafone.de) |
12:51.01 | *** join/#htc-linux Marex-notebook (n=marex@gwfm10-3-250.802.cz) |
13:14.15 | *** join/#htc-linux rob_w|lappi (n=rob_w@ip-90-187-59-140.web.vodafone.de) |
13:53.02 | dcordes | hi |
14:02.00 | BabelO | hi |
14:02.34 | BabelO | LunohoD: can you give me your git link again ? is usb fixed in it ? |
14:03.25 | *** join/#htc-linux dcordes_ (n=user0815@f049016077.adsl.alicedsl.de) |
14:04.37 | LunohoD | BabelO: http://miknix.homelinux.com/linwizard/linwizard-kernel.git/ |
14:04.51 | BabelO | LunohoD: thanks |
14:05.04 | LunohoD | BabelO: do you know how to work with git? |
14:05.07 | BabelO | LunohoD: it is 2.6.23 ? with my patch ? |
14:05.25 | BabelO | LunohoD: yes, i know the minimum :) |
14:05.38 | LunohoD | BabelO: lunohod-upstream branch is 2.6.23-omap1 with your patch |
14:05.55 | LunohoD | BabelO: you need to checkout lunohod-upstream branch |
14:06.01 | BabelO | ok |
14:06.10 | LunohoD | BabelO: then do 'git cherry-pick 6b535cd871ec1a34687f4b6efb1e687b48d133b2' |
14:06.21 | LunohoD | it will fix the usb issue |
14:06.28 | BabelO | ok |
14:26.12 | *** join/#htc-linux ellisway (n=ellis@homealone.good1.com) |
14:27.32 | ellisway | hi all |
14:29.15 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1debc.pool.einsundeins.de) |
14:29.36 | kiozen | hi all |
14:38.08 | *** join/#htc-linux bernt_ (n=bernt@dslb-084-061-229-054.pools.arcor-ip.net) |
14:44.08 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
14:58.55 | cr2 | hi kiozen |
14:59.23 | kiozen | lol, that was too much for BabelO ;) |
14:59.37 | kiozen | hi cr2 |
15:00.01 | cr2 | kiozen: this connector is the usb host. |
15:00.26 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
15:00.33 | cr2 | kiozen: but it's not as powerful as athena. you need external power even for the usb stick |
15:00.34 | kiozen | ahhhh :) the squirels have a good chance to have fun |
15:00.54 | kiozen | ok, bad news for the squirels |
15:01.12 | cr2 | :) |
15:01.53 | kiozen | I am still thinking about this access db file |
15:02.02 | kiozen | is there a lib to read it? |
15:02.23 | kiozen | and what would be a good db format for mobile devices? |
15:03.28 | cr2 | kiozen: i think navit source included libmdb |
15:03.53 | kiozen | ok have to look |
15:04.17 | cr2 | .dbf is a simple format, but it's fixed length, and it's bad for the strings. at it's not compressed |
15:04.37 | cr2 | you can use sqlite, i it's uncompressed too |
15:04.44 | kiozen | the *dat is 430MB |
15:05.15 | kiozen | just for bavaria |
15:16.32 | cr2 | ok. |
15:42.29 | AlGe | hi, |
15:42.29 | AlGe | is there a way to feed some parameters to the initialization of platform devices via kernel cmdline? |
15:42.29 | AlGe | if tought about adding module_param() to blueangel.c and using the values in the struct tsadc_platform_data blueangel_ts_params definition, but blueangel.c is not a module at all, so it will not work. |
15:47.47 | *** join/#htc-linux scorpio16v (n=scorpio1@f049202179.adsl.alicedsl.de) |
15:50.34 | AlGe | ... I'll add the module_param()s to ts-adc.c so that values given there will override the values in the platform device struct. |
16:13.07 | dcordes_ | args where is that linux-msms.git SD driveR?! |
16:20.57 | dcordes_ | I'm having a release party the day they push it |
16:21.09 | *** join/#htc-linux rob_w (n=bob@M849d.m.pppool.de) |
16:53.31 | *** join/#htc-linux hollo (n=hollo@50C5770A.flatrate.dk) |
17:10.38 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
17:14.21 | *** join/#htc-linux CVirus (n=GoD@196.205.193.51) |
17:21.29 | *** join/#htc-linux pH5 (n=ph5@p5485BCBA.dip.t-dialin.net) |
17:30.37 | bernt | AlGe: you could search in the kernel source how keepinitrd is handelt. |
17:31.20 | bernt | ./arch/arm26/mm/init.c |
17:37.14 | *** part/#htc-linux scorpio16v (n=scorpio1@f049202179.adsl.alicedsl.de) |
17:50.16 | *** join/#htc-linux tsdogs (n=tsdogs@62.123.180.130) |
17:50.18 | AlGe | bernt: I'm doing it now via the ts-adc.c file, this makes more sense (then also other platformdrivers could be tested by supplying differnt values) |
17:50.47 | AlGe | now i boot with ts-adc.some_param=XYZ in my kernel cmdline |
17:51.39 | goxboxlive | cr2: awake? |
17:51.45 | goxboxlive | solver? |
17:59.17 | goxboxlive | alive? |
18:00.53 | cr2 | goxboxlive: yes, but need to buy some food :) |
18:02.20 | *** join/#htc-linux lieter (n=lieter@a62-251-100-248.adsl.xs4all.nl) |
18:03.55 | goxboxlive | cr2: Ok, i have made you a new image for htcuniversal now. I will upload it after i have tested it |
18:04.40 | goxboxlive | Kevin2: how do i increase the image size for the easy install. It's 100MB now, could we increase it to 200MB or so? |
18:07.37 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-24ad5b4362c7c543) |
18:16.43 | Kevin2 | goxboxlive: You can do it on the command line. |
18:16.54 | goxboxlive | Kevin2: ok |
18:17.15 | goxboxlive | i thought it could be good to have it in the rootfs |
18:17.56 | Kevin2 | goxboxlive: On the kernel command line (in the compiled in haret script) add "installsize=200". |
18:18.19 | goxboxlive | Kevin2: ok, good to know |
18:32.06 | goxboxlive | cr2: upped the new qtopia image now together with the exe file |
18:42.39 | BabelO | LunohoD: i m notable to git clone ,take too long time |
18:51.45 | LunohoD | BabelO: you can clone mvista and then add miknix server |
19:00.10 | AlGe | Hi, Babelo |
19:00.26 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfdc99.pool.einsundeins.de) |
19:00.38 | dcordes_ | hi Zoolooc |
19:00.58 | dcordes_ | do you know where wince stores photos from the camera when you set it to internal memory? |
19:01.48 | Zoolooc | hi dcordes, I don't know right now, I would have to look where :-) |
19:02.28 | dcordes_ | it's peculiar. I searched with total commander. Can't find them |
19:06.44 | AlGe | in wm2003 it is \storage ... |
19:07.23 | BabelO | yes, My document/My photos |
19:07.26 | BabelO | hi AlGe |
19:09.56 | AlGe | Babelo: I have now added some module paramters to ts-adc so that I can fiddle some values withou recompiling every time, patch is http://www.algepop.net/users/alge/angstrom-ba/fix-ts-adc.diff |
19:10.26 | BabelO | AlGe: ok, need to send you my tsc2200 patch too |
19:11.50 | AlGe | i'm currently running with cmdline |
19:11.50 | AlGe | ts-adc.debug=0 ts-adc.sample_timeout=80 ts-adc.max_jitter=5 ts-adc.min_pressure=4 ts-adc.pressure_factor=100000 |
19:11.50 | AlGe | and I can now draw continuous lines more easily, but on screen kbd is still near to unsuable |
19:12.23 | AlGe | (main diff to default is 80 ms timeout) |
19:12.53 | BabelO | AlGe: ok |
19:14.37 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-db6496ef596c3346) |
19:25.26 | *** join/#htc-linux _CoW_ (i=cow@72.20.3.50) |
19:25.29 | _CoW_ | hi! |
19:26.07 | _CoW_ | i have a acer 305, and i put hermet+linux files on my sdcard |
19:26.13 | _CoW_ | i have a "UART timeout" error |
19:26.30 | _CoW_ | is there any kernel patch? |
19:26.51 | _CoW_ | (Detected S3C2440, Version 2730) |
20:08.38 | cr2 | _CoW_: have you looked at hh.org ? if it's not there, can you post the haretlog.txt ? |
20:10.00 | cr2 | goxboxlive: the link ? |
20:17.26 | bernt | Can someone give me a hint to solve this error when compiling haret (pre-0.5.2): |
20:17.26 | bernt | src/mach/machines.cpp:109: error: 'wcscmp' was not declared in this scope |
20:27.26 | BabelO | bernt: yes, use another compiler ;) |
20:29.03 | bernt | why is it not possible with cegcc? -- allways this windows stuff ... |
20:29.45 | BabelO | bernt: last time i try i have the bad compiler, need to ask goxboxliveor cr2 for which one to use |
20:30.40 | bernt | Yes searching with google gives me: irclog.iclem.net/index.php?chan=htc-linux&month=9&day=21 |
20:30.55 | bernt | but this page is empty :-( |
20:31.38 | bernt | and apt.rikers.org shows only the year 2008 |
20:32.39 | BabelO | bernt: http://irclog.iclem.net/index.php?chan=htc-linux&month=9&day=21&year=2007 |
20:32.51 | BabelO | just add cpast year to your link ;) |
20:33.44 | bernt | I've found it ... |
20:34.01 | BabelO | bernt: so you need arm-wince-mingw32ce-g++ |
20:34.37 | bernt | but this compiler is for windows or? |
20:35.02 | BabelO | bernt: no linux, cr2 as only linux host system :) |
20:36.22 | *** join/#htc-linux the_sys0p` (i=the_sys0@gateway/tor/x-6d3de45841001d6f) |
20:52.06 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
20:54.18 | cr2 | bernt: you probably have a different version of wince-g++, which have a different dependency between the wince headers. |
20:55.41 | cr2 | bernt: i don't know which version Kevin2 uses, but once i needed to include stdio.h to compile with my older cegcc. |
20:58.09 | bernt | OK compiling with mandriva-cegcc-mingw32ce-0.51.0.tar.gz -> no errors :-) |
20:59.13 | cr2 | i'll try too |
21:00.01 | cr2 | goxboxlive: what's that ? |
21:00.05 | cr2 | | In file included from osqlitedriver.h:8, |
21:00.05 | cr2 | | from osqlmanager.cpp:3: |
21:00.05 | cr2 | | osqldriver.h:80: error: invalid pure specifier (only `= 0' is allowed) before ';' token |
21:00.05 | cr2 | | make[1]: *** [osqlmanager.o] Error 1 |
21:10.19 | Kevin2 | cr2 / bernt: I use cegcc 0.50 - the standard binary rpm. |
21:13.31 | cr2 | Kevin2: compiled here too |
21:14.10 | bernt | seems that my cegcc is too old ... telling me 4.1.0 |
21:18.06 | cr2 | bernt: i have 4.1.0 too |
21:20.27 | cr2 | Kevin2: are you doing something for hermes ? |
21:20.59 | goxboxlive | cr2: Did you find the link? It's the useuall the |
21:25.12 | goxboxlive | http://www.linuxtogo.org/~htcpxa/htcuniversal/images/O.P.I.E-II/ |
21:25.13 | goxboxlive | WHat did you mean by what is what? |
21:25.19 | Kevin2 | cr2: I haven't worked on hermes in a while. I did find a patch that got usb working without stutters. The keyboard is also working fine. At some point I may do the ADC stuff (including touchscreen). |
21:25.22 | Kevin2 | cr2: How is SD coming along? |
21:25.46 | cr2 | have not done anything too |
21:26.34 | cr2 | i'm worried about all those other moko2 patches |
21:27.48 | cr2 | i'll try to do something with SD, even if the irq stuff will be a bit messed up |
21:28.17 | cr2 | having the response from a card is a good thing. |
21:28.52 | cr2 | i've seen an interesting thing on n560 |
21:29.39 | cr2 | although it's controlled over sdio, the actual datastream does not go over sdio. |
21:29.59 | Kevin2 | fun |
21:31.36 | cr2 | it's like the BA |
21:32.29 | cr2 | the pcmcia control tuples design is very similar to sdio |
21:32.46 | cr2 | and the data registers are mmaped. |
21:34.20 | cr2 | Kevin2: have you tried to run some gui on hermes ? afair the touchscreen works, even if it's not perfect. |
21:36.34 | BabelO | LunohoD: booting artemis with current hh kernel :) |
21:39.14 | BabelO | LunohoD: do you use rndis or not ? it seem usb is no more up :( |
21:39.33 | cr2 | BabelO: think about the htc-cpld driver. it's easy on artemis :) |
21:39.38 | BabelO | LunohoD: i just replace omap_udc with old from 2.6.16 |
21:40.01 | BabelO | cr2: yes that is why i just build on top of current hh kernel :) |
21:41.24 | LunohoD | BabelO: i did the same for our kernel :) |
21:42.00 | LunohoD | BabelO: i had to replace ether.c too |
21:42.37 | BabelO | LunohoD: ah ether.c too ? why ? for freeze issue or simply to have working usb |
21:42.46 | LunohoD | to have working usb |
21:42.49 | BabelO | LunohoD: actually my computer does not see artemis plugged in |
21:43.12 | BabelO | LunohoD: ok, i ll try too, i think i understand why it does not work with latest kernel |
21:43.54 | LunohoD | it doesn't work since 2.6.18 |
21:45.13 | *** join/#htc-linux ImCoKeMaN (n=imcokema@pool-71-173-158-85.hrbgpa.fios.verizon.net) |
21:46.36 | *** join/#htc-linux TripleDES (n=sergio@89.128.236.151) |
22:20.47 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
22:27.50 | BabelO | LunohoD: can't get usb working now :( |
22:48.46 | cr2 | BabelO: is it possible to save the flash "applet" ? |
22:49.31 | BabelO | cr2: to save a flash applet ? yes, get webpage source code and use wget ;) |
22:49.38 | BabelO | it is just a swf file |
22:50.57 | cr2 | ok, they use some weird javascript too ;) |
22:52.08 | cr2 | var so = new SWFObject("/flash/SunrizeTestings/build/tests.swf", "tests", "647", "429", "8", "#ffffff", true); |
22:53.48 | cr2 | lol |
22:53.51 | cr2 | try{var axo=new ActiveXObject("ShockwaveFlash.ShockwaveFlash.7");} |
22:54.29 | BabelO | compatibility, and like our office software all is done between try catch ;) |
22:54.59 | cr2 | when will the dumb monkeys learn that not everybody uses micro$oft ;) |
22:55.21 | cr2 | looking deeper :) |
22:55.31 | LunohoD | BabelO: http://www.stud.uni-karlsruhe.de/~ux7b/usbfix.tar.bz2 |
22:55.57 | cr2 | BabelO: The specified request cannot be executed from current Application Pool ? |
22:56.22 | BabelO | LunohoD: thanks |
22:57.28 | cr2 | BabelO: i've picked the .swf file. are there any tools to decompile it ? |
22:57.57 | BabelO | cr2: yes there is, depend if it is protectted or not |
22:58.19 | cr2 | how can i check it ? |
22:58.56 | BabelO | cr2: what file command tell you ? |
23:00.12 | cr2 | tests.swf: Macromedia Flash data (compressed), version 8 |
23:00.16 | LunohoD | why shouldn't htc clpld driver work on prophet/wizard? |
23:00.33 | BabelO | LunohoD: cpld is over i2c busses not memory mapped |
23:00.54 | cr2 | LunohoD: because it uses i2c for switching gpios |
23:00.55 | BabelO | cr2: i use that under windows http://www.eltima.com/fr/products/flashdecompiler/ |
23:01.22 | cr2 | BabelO: thanks. |
23:01.32 | cr2 | BabelO: the file is 12K, which is strange. |
23:01.45 | LunohoD | and prophet cpld is memory mapped, right? |
23:02.10 | BabelO | cr2: so it is maybe a flash video player which get video stream from somewhere else ? |
23:02.44 | BabelO | LunohoD: don't know about prophet, cr2 know more |
23:03.22 | LunohoD | cr2: could you please tell me more about prophet? |
23:04.38 | cr2 | BabelO: no, it's a map "plugin", i hope the vector map ;) |
23:05.04 | cr2 | LunohoD: the artemis cpld is memory mapped, like it's on all other pxa and s3c2442 phones. |
23:05.44 | cr2 | LunohoD: but the wiazrd, herald & co. use this i2c controlled cpld. |
23:06.15 | cr2 | afaik artemis is the only mmap cpld omap850-based phone. |
23:06.20 | LunohoD | cr2: what devices are connected to this cpld? |
23:06.26 | cr2 | gpios |
23:06.36 | cr2 | it's a gpio extender |
23:06.42 | cr2 | maybe some leds |
23:06.48 | cr2 | and some buttons. |
23:07.52 | cr2 | wince does something like set_cpld(bank,pin,on/off); |
23:08.26 | LunohoD | hm |
23:08.29 | cr2 | on a mmap cpld it's just a 16bit array element access. |
23:08.45 | BabelO | LunohoD: what is your initrd ip adress ? |
23:08.49 | cr2 | but on "i2c cpld" it messes with the i2c registers. |
23:08.54 | LunohoD | BabelO: 10.100.0.1 |
23:09.10 | cr2 | nobody decoded that to the end. |
23:09.15 | BabelO | LunohoD: thx |
23:10.03 | cr2 | BabelO: is it possible to trace i2c with haret ? |
23:10.24 | BabelO | cr2: on artemis i m able to trace camera i2c traffic |
23:10.25 | cr2 | if not, then it's a serious deficiency ;) |
23:10.45 | cr2 | LunohoD: can you try to trace i2c ? |
23:10.49 | LunohoD | cr2: did you see the omap850 trm? |
23:10.51 | cr2 | BabelO: fm ? |
23:10.55 | LunohoD | cr2: i dunno how to do that :) |
23:11.05 | cr2 | LunohoD: yes, but i didn't read it in detail |
23:11.15 | LunohoD | i've got a question |
23:11.31 | cr2 | BabelO: what is the i2c address on omap850 ? |
23:11.31 | BabelO | cr2: i did not try to trace FM, because fm need headset, and i have some issue tracing over wifi |
23:11.40 | BabelO | cr2: 3800 |
23:11.46 | BabelO | if i remember |
23:11.53 | cr2 | LunohoD: you need to run haret |
23:12.30 | cr2 | addlist mmutrace <0xvaddr> size |
23:12.30 | LunohoD | ok |
23:12.33 | BabelO | LunohoD: 0xfffb3800 |
23:13.02 | cr2 | size can be 256 bytes or so |
23:14.10 | LunohoD | what's next? |
23:15.06 | BabelO | cr2, LunohoD : http://pastebin.ca/865254 |
23:15.15 | BabelO | now it is ok with current hh kernel |
23:15.37 | BabelO | LunohoD: thx for your bz2 archive, |
23:16.29 | LunohoD | :) |
23:16.52 | BabelO | LunohoD: lol my kernel seem did not like startx ;) |
23:16.59 | BabelO | i keep clock at 201Mhz |
23:17.06 | LunohoD | tell me please how to start sniffing |
23:18.33 | BabelO | LunohoD: once you are in haret |
23:18.45 | BabelO | addlist mmutrace p2v(0xfffb3800) 0xff |
23:18.48 | BabelO | wi 1 |
23:20.33 | LunohoD | BabelO: Too many L1 traces (max=64) |
23:21.05 | cr2 | LunohoD: set 1 page as the size |
23:21.07 | cr2 | 0x1000 |
23:21.13 | BabelO | LunohoD: hm; don't know what is that |
23:21.28 | cr2 | Kevin2: ??? |
23:21.36 | cr2 | LunohoD: show mmutrace |
23:21.44 | Kevin2 | Hi |
23:21.45 | LunohoD | # show mmutrace |
23:21.46 | LunohoD | 000: 0xb80b3800 4096 'rw' 00000000 none |
23:21.56 | _CoW_ | hi |
23:21.59 | LunohoD | 000.000 IRQS GIRQ5: IS128(224)=1 |
23:22.00 | LunohoD | 000.000 IRQS IH2: IH2-38(70)=1 |
23:22.01 | cr2 | Kevin2: what is Too many L1 traces (max=64) |
23:22.04 | Kevin2 | Sorry, just got back - what did I miss? |
23:22.08 | LunohoD | Handled 1113 irq, 18206 abort, 5097 prefetch, 0 lost, 0 errors |
23:22.09 | _CoW_ | i have a uart timeout problem (no display) |
23:22.10 | _CoW_ | http://pastebin.ca/865262 |
23:22.14 | cr2 | Kevin2: Too many L1 traces (max=64) |
23:22.16 | _CoW_ | anyone can help me please? |
23:22.44 | Kevin2 | That means you tried to add more than 64 items to the mmutrace variable -- it only supports 64 lines. |
23:22.47 | cr2 | _CoW_: what haret version is that ?? |
23:23.19 | cr2 | Kevin2: but he just used the stock haret, with only 1 mmutrace |
23:23.19 | _CoW_ | 2src |
23:23.21 | _CoW_ | 2sec |
23:23.38 | LunohoD | Kevin2: is it possible to redirect the haretconsole output to the file? |
23:23.43 | *** join/#htc-linux pH5 (n=ph5@p5485BCBA.dip.t-dialin.net) |
23:24.00 | cr2 | LunohoD: on linux ? |
23:24.12 | LunohoD | cr2: yes |
23:24.13 | *** join/#htc-linux the_sys0p` (i=the_sys0@gateway/tor/x-95347bd2a13e9cc0) |
23:24.15 | cr2 | hi pH5 |
23:24.29 | cr2 | LunohoD: if you use 'console' then it's logged by default |
23:24.33 | LunohoD | and how to get rid of "000.000 0b398aa4: ldrh r3, [r4, #4] # b80b3804==00000000" |
23:24.36 | LunohoD | ? |
23:24.39 | pH5 | hi cr2 |
23:24.54 | BabelO | hi pH5 |
23:24.57 | _CoW_ | cr2 -> haret 0.3.7 |
23:25.04 | cr2 | LunohoD: it's the i2c traffic i guess. |
23:25.21 | cr2 | _CoW_: you need something more uptodate ;) |
23:25.28 | Kevin2 | LunohoD: Sure. You can redirect an individual command (eg, "redir <file> <cmd") or by enabling all logging to a file (by running "log <file>"). |
23:25.33 | _CoW_ | 0.5.1 doesn't run |
23:25.56 | cr2 | _CoW_: enable earlyharetlog.txt ? |
23:26.10 | cr2 | and post the haretlog.txt |
23:26.10 | _CoW_ | how? i have only the .exe |
23:26.28 | cr2 | create the empty earlyharetlog.txt in the same directory. |
23:26.35 | cr2 | and run the .exe |
23:26.36 | _CoW_ | i don"t have windows to compile it :/ |
23:26.41 | _CoW_ | ok |
23:26.54 | LunohoD | Kevin2: is it already logging, thanks |
23:26.54 | _CoW_ | it works with 0.3.7v? |
23:26.54 | cr2 | you don't need to compile anything. |
23:26.59 | _CoW_ | k |
23:27.12 | _CoW_ | i thought i had to because arch is different! |
23:27.21 | cr2 | _CoW_: on s3c24xx ? |
23:27.31 | _CoW_ | its as3c22xx |
23:27.36 | cr2 | i guess (99%) it's not running |
23:27.47 | _CoW_ | no ur right |
23:28.00 | cr2 | please post the haretlog.txt from 0.5.1 |
23:28.11 | Kevin2 | cr2 / LunohoD: Okay - sorry, that error means that haret was asked to remap more than 64 1meg sections - which it didn't like. What was in the mmutrace variable? |
23:28.15 | _CoW_ | 0.5.1 doesn't run :/ |
23:28.39 | cr2 | _CoW_: what is the error message ? |
23:28.52 | _CoW_ | wait |
23:28.53 | cr2 | _CoW_: i've run haret on wince 2.11 ;) |
23:29.11 | LunohoD | Kevin2: 000: 0xb80b3800 4096 'rw' 00000000 none |
23:30.14 | cr2 | pH5: what was the problem with the i2c cpld control ? do you know something more ? |
23:30.42 | Kevin2 | <PROTECTED> |
23:31.00 | LunohoD | Kevin2: 0.5.1 |
23:31.02 | _CoW_ | haret 0.5.1 is not a valid windows ce application |
23:31.26 | cr2 | _CoW_: what device is that ? |
23:31.33 | _CoW_ | sd |
23:31.44 | pH5 | hi BabelO |
23:31.45 | cr2 | BabelO: i think you can fix that too -> |
23:31.47 | _CoW_ | i have a acer e305 wince 5.0 |
23:31.50 | cr2 | Unknown OMAP cpu type: 0x00 |
23:31.50 | cr2 | OMAP0000 revision 1 handled as 00xx id: 0000000000000000 |
23:31.58 | pH5 | cr2: the device locked up whenever I tried to load the i2c driver |
23:32.06 | pH5 | I still don't know more than that. |
23:32.12 | cr2 | pH5: ok. |
23:32.16 | LunohoD | Kevin2: addlist mmutrace p2v(0xfffb3800) 0xff |
23:32.21 | cr2 | _CoW_: strange. |
23:32.30 | LunohoD | Kevin2: set permissivemmutrace 1 and wi 1 |
23:32.40 | _CoW_ | that's why i think i need to recompile it |
23:32.47 | _CoW_ | only 0.3.7 works |
23:32.55 | Kevin2 | LunohoD: Can you pastebin the full log? |
23:32.57 | _CoW_ | but there is a uart error :/ |
23:33.15 | _CoW_ | and for my qtek8500 i can't find enter key :p |
23:33.15 | BabelO | cr2: yes, now i know where to look |
23:33.26 | cr2 | _CoW_: forget about 0.3.7, we need to fix the current version. |
23:33.33 | _CoW_ | ok |
23:33.36 | BabelO | cr2: where is the htc-cpld driver ? |
23:33.38 | _CoW_ | could i help you? |
23:34.13 | _CoW_ | for haret 0.3.8 i have this error: |
23:34.15 | cr2 | BabelO: in the MFD directory, where the asic3 is |
23:34.34 | LunohoD | Kevin2: http://www.pastebin.ca/865313 |
23:34.41 | _CoW_ | cannot find haret0.3.8 or one of its components.make sure the path and filename are correct and that all the required libraries are available |
23:35.00 | cr2 | _CoW_: it's usually a .dll error |
23:35.18 | _CoW_ | k |
23:35.37 | Kevin2 | _CoW_: That is weird - can you try to see of any of haret 0.4.5 - 0.5.1 from http://www.handhelds.org/~koconnor/haret/ works? |
23:35.38 | cr2 | BabelO: is the stack_dump intentional ? |
23:35.45 | _CoW_ | when i launch 0.3.7 it tells me: Warning: Detected CPU family S3C24XX |
23:35.54 | _CoW_ | ok |
23:35.57 | _CoW_ | i try now |
23:36.15 | cr2 | _CoW_: can you give a link to 0.3.7 you use ? i'll run objdump |
23:36.27 | _CoW_ | ok |
23:36.30 | _CoW_ | could i dcc it? |
23:36.35 | cr2 | no. |
23:36.48 | _CoW_ | k |
23:37.06 | Kevin2 | LunohoD: What does "show p2v(0xfffb3800)" report? |
23:37.29 | BabelO | cr2: no, not really, it seem that the pin mux funciton is not ok for omap850, some are missing |
23:37.47 | cr2 | BabelO: i think you should read the trm then ;) |
23:38.08 | BabelO | cr2: yes there is a table in, with each pin mux funciton |
23:38.22 | cr2 | BabelO: it does not make sense to move forward without fixing it. |
23:38.31 | BabelO | i think that is why i get this message on uart port |
23:38.32 | LunohoD | Kevin2: 0xb80b3800 |
23:38.33 | _CoW_ | http://embedded.net.ru/rx1950/haret.exe |
23:38.38 | _CoW_ | i think thats the right file |
23:38.46 | cr2 | _CoW_: ok. |
23:39.55 | LunohoD | cr2: http://www.pastebin.ca/865316 |
23:40.39 | _CoW_ | 0.5.0 same problem |
23:40.51 | cr2 | LunohoD: 000000: mmutrace 0b398b44: e1d330b4(ldrh) b80b3804 00000000 (00000000) |
23:41.11 | _CoW_ | all version +0.4.5 tells me: is not a valid windows ce applicatino |
23:41.13 | cr2 | LunohoD: these are the i2c changes, you should check where is the data register. |
23:41.53 | Kevin2 | LunohoD: What did you do to get it to work? |
23:41.54 | cr2 | _CoW_: it must be some .dll problem. |
23:41.54 | cr2 | _CoW_: i'm looking at the 0.3.7 binary |
23:42.01 | _CoW_ | ok thanks |
23:42.11 | _CoW_ | if i can help you... |
23:42.19 | LunohoD | Kevin2: dunno |
23:43.00 | LunohoD | Kevin2: i can send you my logs |
23:43.57 | Kevin2 | _CoW_: Does the 0.3.6 versions of haret from http://www.handhelds.org/moin/moin.cgi/HaRET work? |
23:44.03 | cr2 | _CoW_: 0.3.7 links to WINSOCK.dll and COREDLL.dll |
23:44.14 | _CoW_ | i try |
23:44.29 | LunohoD | Kevin2: http://www.stud.uni-karlsruhe.de/~ux7b/haretlogs.tar.bz2 |
23:44.36 | cr2 | MajorOSystemVersion 4 |
23:44.49 | cr2 | MajorSubsystemVersion 3 |
23:46.16 | cr2 | _CoW_: it's 4 1 for 0.5.2 and also winsock and coredll. |
23:46.46 | cr2 | _CoW_: can you do md5sum on your .exe |
23:46.56 | _CoW_ | yes |
23:47.04 | _CoW_ | on 0.3.6? |
23:47.06 | cr2 | Kevin2: imho we should post md5sum/sha for the .exe |
23:47.07 | _CoW_ | 7 |
23:47.17 | cr2 | _CoW_: no, for 0.5.x |
23:47.20 | cr2 | you use |
23:47.23 | _CoW_ | k |
23:47.44 | cr2 | Kevin2: it's a good idea anyway. |
23:47.46 | _CoW_ | 0268efad218806ab3f5ac800b85cf632 haret-0.5.1.exe |
23:47.59 | cr2 | _CoW_: the link to .exe ? |
23:48.17 | _CoW_ | ./SDMMC/linux/ |
23:49.00 | Kevin2 | LunohoD: Weird - if it happens again, can you do a "show mmutrace" in the same session as the one with the fault? |
23:49.14 | LunohoD | Kevin2: ok |
23:49.15 | cr2 | _CoW_: i mean where did you get the haret-0.5.1.exe |
23:49.32 | Kevin2 | cr2: Must be from my site - the md5sum matches mine. |
23:49.46 | _CoW_ | http://www.handhelds.org/~koconnor/haret/ |
23:49.52 | _CoW_ | sorry i'm french :/ |
23:49.59 | BabelO | cr2: it is the htc-egpio.c ? i ve no htc-cpld |
23:50.18 | cr2 | BabelO: yes. |
23:50.37 | _CoW_ | haret 0.3.4-j820 works |
23:50.51 | _CoW_ | same uart problem |
23:51.14 | cr2 | Kevin2: weird. i don't have an explanation ;) |
23:51.38 | cr2 | _CoW_: acer 305 ? |
23:51.54 | _CoW_ | yes |
23:51.59 | _CoW_ | e305 |
23:52.02 | _CoW_ | GPS |
23:52.26 | Kevin2 | _CoW_: Does the 0.3.6 versions of haret from http://www.handhelds.org/moin/moin.cgi/HaRET work? |
23:53.16 | _CoW_ | wait |
23:53.35 | _CoW_ | no |
23:54.33 | _CoW_ | nocannot find 0.3.6* or one of this components... |
23:54.52 | _CoW_ | dependencies problem i think |
23:55.31 | cr2 | _CoW_: this is very strange indeed. |
23:56.08 | cr2 | maybe your winsock/coredll crippled in some funny way ;) |
23:56.31 | _CoW_ | i samsung, arm320 s3c2440A |
23:56.51 | _CoW_ | wince 5.00 build 1400 |
23:57.05 | Kevin2 | _CoW_: Hrmm. I wonder if you have an armv4 processor. |
23:57.16 | cr2 | hehe. 0.3.6 does not have the function names, only the ordinals. |
23:57.37 | _CoW_ | CPU is ARM ARM arch 4T stepping 0 running in system mode |
23:57.43 | cr2 | Kevin2: s3c is armv4 |
23:58.19 | Kevin2 | Okay - haret-0.3.6 is only setting armv3m anyway. |