00:05.35 | cr2_ | mazzanet: ok, it's a hack but it may work :) don't forget to include pxafb |
00:05.44 | cr2_ | driver in the kernel. |
00:06.51 | mazzanet | ah whoops |
00:07.07 | mazzanet | forgot to add it to arch/arm/mach-pxa/Makefile |
00:10.52 | Kevin2 | Hi |
00:11.21 | Kevin2 | cr2_: Use command ADDR2MOD to find what module an address is from. |
00:12.27 | cr2_ | Kevin2: ok. |
00:12.47 | cr2_ | Kevin2: i've found a lot of subsystems. and the CKEN area |
00:13.16 | Kevin2 | Is there overlap with s3c? |
00:14.24 | mazzanet | woot |
00:14.27 | mazzanet | kernel compiled |
00:15.41 | cr2_ | Kevin2: i suspect SDIO and 3 UARTs must be the same. http://wiki.xda-developers.com/index.php?pagename=TitanMemoryMap |
00:16.14 | cr2_ | the 'ts related' is a bit misleading. TS is on I2C |
00:17.00 | cr2_ | Kevin2: phys 0xa8600000 is the CKEN area |
00:17.25 | Kevin2 | Okay. gpio doesn't look like s3c at all. msm has input sensors separate from output. |
00:18.28 | cr2_ | yes. but SDIO and UART should be compared. |
00:18.52 | cr2_ | the most tough nut is the MDDI. |
00:23.05 | *** join/#htc-linux AC_Mast (i=s@gateway/tor/x-00126d2b0c6ef293) |
00:27.26 | mazzanet | cr2_: do i need to rebuild haret with the new machine type? |
00:28.29 | cr2_ | Kevin2: have you added XDA atom to haret ? |
00:29.34 | Kevin2 | No - does it need to be added? |
00:33.16 | cr2_ | i've updated the mach-types today |
00:33.45 | cr2_ | mazzanet has it and wants to boot without any hacks. |
00:36.35 | Kevin2 | cr2_: Okay - send a diff to haret@handhelds.org and I'll check it in. |
00:37.24 | cr2_ | not right now :) |
00:37.47 | mazzanet | :P |
00:38.19 | mazzanet | say i have haret hanging on jumping to kernel |
00:38.25 | mazzanet | or supposedly hanging |
00:38.42 | mazzanet | is there a way to get something more verbose out of it on what it's doing? |
00:41.29 | Kevin2 | mazzanet: After that, it's the kernel that has control - so you'll need to add debugging info to the kernel. |
03:30.14 | ImCoKeMaN | hey |
04:36.41 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
05:06.57 | *** join/#htc-linux rakeem__2 (n=root@n219078210246.netvigator.com) |
05:12.01 | *** join/#htc-linux rakeem__4 (n=root@n219073043221.netvigator.com) |
05:37.01 | *** join/#htc-linux |dion| (n=dion@inhex.net) |
06:20.05 | *** join/#htc-linux pleemans (n=peter@leemanpe.ugent.be) |
06:31.32 | *** join/#htc-linux _law_ (n=law@mail.stiftadmont.at) |
07:00.38 | *** join/#htc-linux goxboxlive (n=jrs@195.159.97.196) |
07:06.58 | goxboxlive | cr2_: Here is some of the cam pathces from A780. Do they help you writing the driver? http://people.openezx.org/wyrm/ |
07:44.46 | *** join/#htc-linux sadeness_ (n=LamersIn@nat2.rlan.ru) |
07:52.09 | *** join/#htc-linux slarner_ (n=slarner@213.165.224.54) |
08:54.25 | *** join/#htc-linux JuNuKN (n=JuNuKN@p549AC16C.dip0.t-ipconnect.de) |
09:17.07 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
09:50.38 | *** join/#htc-linux the_sys0p (n=the_sys0@117.121.80.251) |
10:03.12 | *** join/#htc-linux rob_w (n=bob@Maf8b.m.pppool.de) |
10:50.38 | goxboxlive | Qtopia-opensource-4.3.0 is released. Now, where is the helix sources :-) |
12:04.38 | *** join/#htc-linux slarner (n=slarner@83.167.163.9) |
12:23.18 | *** part/#htc-linux JuNuKN (n=JuNuKN@p549AC16C.dip0.t-ipconnect.de) |
12:35.09 | *** join/#htc-linux pleemans (n=peter@leemanpe.ugent.be) |
12:48.06 | *** join/#htc-linux goxboxlive (n=jrs@195.159.97.196) |
13:10.57 | *** join/#htc-linux pleemans (n=peter@leemanpe.ugent.be) |
13:42.37 | *** join/#htc-linux ivucica (i=ivucica@161.53.76.236) |
13:43.45 | ivucica | is it possible to use uclibc-compiled kernel with glibc-based distribution? |
13:44.19 | ivucica | if compiling for h3800 with openembedded, is it sufficient to set "TARGET_OS" to "linux-uclibc" to build with uclibc instead of glibc? |
13:52.57 | *** join/#htc-linux Guest_475 (i=IceChat7@123-192-89-168.dynamic.kbronet.com.tw) |
13:53.00 | *** join/#htc-linux Guest_475_ (i=IceChat7@123-192-89-168.dynamic.kbronet.com.tw) |
14:24.24 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
14:24.45 | *** part/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
15:36.23 | *** join/#htc-linux goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
15:44.18 | rakeem__4 | Evenin' goxbox... |
15:46.34 | rakeem__4 | Can you give me the URL for the most active forum (the one you're always on)... I seem to have lost it... |
16:21.39 | goxboxlive | rakeem__4: forum.xda-developers.com |
16:28.31 | *** join/#htc-linux x7500denmark (n=x7500den@88.212.76.173) |
16:30.31 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
16:48.05 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
16:51.20 | BabelO | hello |
17:22.41 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
17:26.30 | *** join/#htc-linux _dion_ (n=dion@inhex.net) |
17:31.30 | *** join/#htc-linux pH5 (n=ph5@e178226052.adsl.alicedsl.de) |
17:59.30 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
18:04.13 | *** join/#htc-linux rmoravci1 (n=rmoravci@ip-89-103-152-149.karneval.cz) |
18:21.45 | *** join/#htc-linux kiozen (n=oeichler@rgnb-4db09f03.pool.einsundeins.de) |
18:31.22 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
18:52.06 | *** join/#htc-linux CrAsH_x64 (n=crash@84.78.99.40) |
19:14.58 | *** join/#htc-linux rmoravci1 (n=rmoravci@ip-89-103-152-149.karneval.cz) |
19:45.25 | *** join/#htc-linux _dion_ (n=dion@inhex.net) |
20:05.24 | *** join/#htc-linux TimRiker (n=timr@psnet.cc) |
20:36.15 | *** join/#htc-linux law|ibook (n=_law_@213.173.86.202) |
20:45.42 | *** join/#htc-linux cr2 (n=konversa@crpl22.physik.uni-wuppertal.de) |
20:59.29 | goxboxlive | hi cr2 |
21:01.17 | cr2 | hi goxboxlive |
21:02.47 | ImCoKeMaN | hi cr2 |
21:03.23 | goxboxlive | cr2: Trolltech released qtopia-4.3.0 today |
21:07.32 | cr2 | good. |
21:07.43 | cr2 | what about non-greenphone archs ? |
21:08.33 | *** part/#htc-linux CrAsH_x64 (n=crash@84.78.99.40) |
21:35.52 | cr2 | ImCoKeMaN: i've found everything that was easy to find on msm7x00 |
21:37.13 | ImCoKeMaN | meaning you want me to dig deaper or you found all the things you think i'm capable of hehe |
21:41.01 | goxboxlive | cr2: the same as in preview |
21:46.38 | cr2 | ImCoKeMaN: you can do more tracing and dumping in the unknown areas, to see where is something happening. |
21:49.40 | ImCoKeMaN | did kevin patch haret so it will auto show the modules? |
21:51.01 | cr2 | no, but he said there is an ADDR2MODULE command. or something like that. |
22:07.54 | goxboxlive | cr2: hwo do i mount a /dev/mtd0 partition (on A780) |
22:26.08 | cr2 | goxboxlive: which filesystem is that ? |
22:27.41 | goxboxlive | cr2: i dont know, it's the original a780 filesystem. |
22:27.50 | goxboxlive | i am using dd if of |
22:27.57 | cr2 | ok. |
22:28.12 | cr2 | there were strange filesystems there. |
22:28.27 | goxboxlive | But i get illigal instruction when it's done |
22:28.30 | goxboxlive | ok |
22:28.41 | cr2 | buggy kernel. |
22:29.09 | goxboxlive | I think i am going to flash my phone with a dual boot |
22:29.40 | cr2 | the qtopia GSM modem code is needed. |
22:30.23 | goxboxlive | cr2: FOr A780? |
22:30.44 | cr2 | i've looked at the a780 schematics. there are uart1 and uart2 on the phone cpu. where is gps connected ? |
22:30.48 | cr2 | yes. |
22:31.07 | cr2 | uart2 will be the best. |
22:31.17 | cr2 | because it has test pads. |
22:31.39 | cr2 | then it's possible to cut it from the big brother |
22:31.59 | cr2 | and solder to the STUART test pads. |
22:32.50 | goxboxlive | solder?? are you crazy |
22:33.22 | cr2 | The GPS is not connected to the AP, but to UART2 of the BP. |
22:33.36 | cr2 | says http://wiki.openezx.org/GPS |
22:33.38 | cr2 | :) |
22:33.55 | cr2 | i think it's also a good idea to cut the builtin mic. |
22:34.07 | cr2 | who knows how it's wired :) |
22:35.22 | goxboxlive | ok :-/ |
22:35.26 | cr2 | good. now i need to know where is the GPS firmware. |
22:35.38 | cr2 | and if it's necessary to upload it. |
22:35.59 | cr2 | if it's in the radio rom, then how to extract it from there. |
22:36.18 | cr2 | the same if it's the the lapisrv |
22:36.59 | cr2 | what's wrong with connecting the test pads to each other ? |
22:37.11 | cr2 | it's not really a hardcore soldering |
22:37.26 | cr2 | unlike the 128MB upgrade on the universal ;) |
22:38.28 | goxboxlive | :-) |
22:42.13 | cr2 | ok, so how do we find the firmware ? |
22:42.55 | cr2 | btw, BabelO just uses the old brf6150 BT firmware on brf6100, and did not break anything :) |
22:43.33 | goxboxlive | :-) |
22:43.51 | goxboxlive | i have no idea how to find the fw |
22:44.32 | goxboxlive | it writes 1MB pr minute . Man it's goes slow |
22:47.42 | cr2 | goxboxlive: is there some good a780 site which describes the a780 partitions and their contents ? |
22:47.53 | cr2 | something like xda-dev |
22:48.13 | cr2 | with the tools to dissect the updates. |
22:48.49 | goxboxlive | root@a780:/$ cat /proc/mtd |
22:48.49 | goxboxlive | dev: size erasesize name |
22:48.49 | goxboxlive | mtd0: 00020000 00008000 "Bootloader" |
22:48.50 | goxboxlive | mtd1: 000e0000 00020000 "Kernel" |
22:48.50 | goxboxlive | mtd2: 018e0000 00020000 "rootfs" |
22:48.50 | goxboxlive | mtd3: 00580000 00020000 "VFM_Filesystem" |
22:48.52 | goxboxlive | mtd4: 00020000 00020000 "setup" |
22:48.56 | goxboxlive | mtd5: 00020000 00020000 "Logo" |
22:48.58 | goxboxlive | root@a780:/$ |
22:49.25 | cr2 | mdoc ? |
22:49.47 | cr2 | cat /etc/fstab |
22:50.14 | cr2 | what 2 partitions i see when mounting over usb ? |
22:50.52 | goxboxlive | cr2: your sd card |
22:50.59 | cr2 | not only |
22:51.25 | cr2 | there is MOTO_A780 partition. |
22:52.00 | cr2 | how many partitions are on mdoc ? |
22:52.18 | goxboxlive | the ones i listed |
22:52.43 | cr2 | isn't it the pxa flash ? |
22:53.03 | cr2 | hehe. how are you going to read mdoc in the 2.6 kernel ?! |
22:53.03 | goxboxlive | ok |
22:53.25 | goxboxlive | cr2: i a running the 2.6 kernel now |
22:54.15 | cr2 | http://wiki.openezx.org/Internal_Flash |
22:55.08 | goxboxlive | ok |
22:55.27 | cr2 | The DiskOnChip contains /diska(user data), /usr/language(localization). |
22:55.32 | cr2 | two partitons ? |
22:55.43 | cr2 | i think /diska is seen over usb. |
22:57.38 | cr2 | http://wiki.openezx.org/Backups |
22:59.14 | goxboxlive | cr2: yes i followed it |
23:01.35 | cr2 | where is teh copilot ? |
23:02.38 | goxboxlive | i dont know, ask at #openezx |
23:05.16 | cr2 | hmm. |
23:05.28 | cr2 | i'll install the usblan mpkg |
23:17.18 | cr2 | MontaVista Linux Consumer Electronics Edition 3.0 |
23:17.18 | cr2 | Linux/armv5tel 2.4.20_mvlcee30-mainstone |
23:20.18 | cr2 | goxboxlive: /usr/language/preloadapps/qtapps |
23:28.32 | Kevin2 | Hi |
23:28.34 | cr2 | dumb kernel. does not support ext2. |
23:28.38 | cr2 | hi Kevin2 |
23:30.10 | Kevin2 | Hi cr2 |
23:32.06 | goxboxlive | how do i get write acces on a mounted cramfs image? |
23:32.29 | goxboxlive | i use mount -o loop -t cramfs /blabla /blabla |
23:35.27 | goxboxlive | ahh forget it |
23:36.14 | ellisway | hi all |