02:53.13 | *** join/#htc-linux Mineque (n=Mineque@195.60.65.50) [NETSPLIT VICTIM] |
02:53.14 | *** join/#htc-linux thinko (n=jdoe6alp@smaug.rackdragon.com) [NETSPLIT VICTIM] |
02:53.14 | *** join/#htc-linux Foxdie (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) [NETSPLIT VICTIM] |
02:53.14 | *** join/#htc-linux paulproteus (n=paulprot@wide-rose.makesad.us) |
02:53.14 | *** join/#htc-linux Kevin2 (n=Kevin@207-237-65-88.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com) [NETSPLIT VICTIM] |
02:53.14 | *** join/#htc-linux ljp (n=lpotter@203.94.178.46) |
02:54.28 | *** join/#htc-linux regulate (n=regulate@notchill.com) |
02:57.03 | *** join/#htc-linux AwayNAiL (n=repvik@sql.kynisk.com) |
02:57.03 | *** join/#htc-linux regulate (i=regulate@notchill.com) |
02:59.06 | *** join/#htc-linux cr2_ (n=konversa@crpl22.physik.uni-wuppertal.de) |
02:59.11 | *** join/#htc-linux elysion (n=elysion@cd-a11.lkier.tontut.fi) [NETSPLIT VICTIM] |
02:59.11 | *** join/#htc-linux TBBle_ (n=tbble@202.55.155.85) [NETSPLIT VICTIM] |
02:59.11 | *** join/#htc-linux KimuSan^ (n=kimusan@ip205.tankegang.dk) [NETSPLIT VICTIM] |
02:59.16 | *** join/#htc-linux ellisway (n=ellis@homealone.good1.com) |
02:59.20 | *** join/#htc-linux Keizer (n=keizer@c-69-139-42-47.hsd1.fl.comcast.net) [NETSPLIT VICTIM] |
02:59.20 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-74-7-146.dynamic.dsl.as9105.com) |
02:59.20 | *** join/#htc-linux BabelO_ (n=Miranda@81.80.236.75) [NETSPLIT VICTIM] |
02:59.21 | *** join/#htc-linux Funklord (n=cow@c-dcd572d5.014-46-73746f28.cust.bredbandsbolaget.se) [NETSPLIT VICTIM] |
02:59.21 | *** join/#htc-linux wireddd (n=wired@97-81-78-105.dhcp.athn.ga.charter.com) [NETSPLIT VICTIM] |
02:59.40 | *** join/#htc-linux regulate (i=regulate@notchill.com) |
02:59.40 | *** join/#htc-linux bd2 (n=cbou@85.21.88.2) [NETSPLIT VICTIM] |
02:59.40 | *** join/#htc-linux imcokeman_ (n=me@rrcs-67-78-122-67.sw.biz.rr.com) [NETSPLIT VICTIM] |
02:59.40 | *** join/#htc-linux markcw (n=markc@beigebox.liquidev.com) [NETSPLIT VICTIM] |
02:59.40 | *** join/#htc-linux anYc (i=mario@hadince17.hadiko.uni-karlsruhe.de) [NETSPLIT VICTIM] |
02:59.51 | *** join/#htc-linux sladen (i=paul@starsky.19inch.net) |
02:59.51 | *** join/#htc-linux Mineque (n=Mineque@195.60.65.50) [NETSPLIT VICTIM] |
02:59.51 | *** join/#htc-linux thinko (n=jdoe6alp@smaug.rackdragon.com) [NETSPLIT VICTIM] |
02:59.51 | *** join/#htc-linux Foxdie (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) [NETSPLIT VICTIM] |
02:59.51 | *** join/#htc-linux paulproteus (n=paulprot@wide-rose.makesad.us) |
02:59.51 | *** join/#htc-linux Kevin2 (n=Kevin@207-237-65-88.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com) [NETSPLIT VICTIM] |
02:59.51 | *** join/#htc-linux ljp (n=lpotter@203.94.178.46) |
03:00.13 | *** join/#htc-linux ChanServ (ChanServ@services.) |
03:00.13 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
03:00.22 | *** join/#htc-linux ecze (n=ecze@eczema.ecze.com) [NETSPLIT VICTIM] |
03:00.50 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
03:00.50 | *** join/#htc-linux the_sys0p (i=nroberts@117.75.146.114) [NETSPLIT VICTIM] |
03:00.50 | *** join/#htc-linux Marex (n=Marex@gwfm10-3-250.802.cz) |
03:00.50 | *** join/#htc-linux ltxda2 (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
03:00.50 | *** join/#htc-linux edison (i=oystein@homelien.no) |
03:00.50 | *** join/#htc-linux hlbot (n=adm@iclem.net) |
03:00.51 | *** join/#htc-linux toi (n=pleemans@d5152D3B4.access.telenet.be) |
03:00.51 | *** join/#htc-linux Dinde (n=kayser@sur-internet.net) [NETSPLIT VICTIM] |
03:00.51 | *** join/#htc-linux gw280 (n=george@vm.gwright.org.uk) |
03:01.16 | *** join/#htc-linux AwayNAiL (n=repvik@nslu2-linux/pdpc.active.NAiL) |
06:11.53 | *** join/#htc-linux the_sys0p (i=nroberts@117.75.150.183) |
07:00.01 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
07:37.12 | *** join/#htc-linux Othello__ (i=nobody@gateway/tor/x-76c7f2c7b3eb0fc3) |
08:33.22 | *** join/#htc-linux |dion| (n=dion@inhex.net) |
08:39.22 | *** join/#htc-linux goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
08:42.22 | goxboxlive | morning |
09:25.10 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
09:29.31 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-103-152-149.karneval.cz) |
09:40.18 | *** join/#htc-linux rob_w (n=bob@X0e24.x.pppool.de) |
10:02.21 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-103-152-149.karneval.cz) |
10:08.34 | rob_w | hi all .. i just found that the HTC Elf isnt a 3G device .. too bad .. so i will start playing with it but then i will get my the real "Touch" P5500 which has 3G |
10:12.43 | cr2_ | rob_w: it's a qualcomm device |
10:15.31 | rob_w | that you said yesterday cr2_ so i learned it now the hard way what that means .. well . nonetheless i will get a new HTC baby soon ,, and when HTC Nike is available i will siwthc for it |
10:17.08 | rob_w | also i now have contacts to a cool programming langauge which could give me a easy and powerfull ( small resources) way to implement opengl/sdl stuff .. so my personal goal for 2008 is to get a real cool UI with 3d Cubes ! |
10:17.43 | cr2_ | ok. |
10:17.52 | cr2_ | so you have lef now ? |
10:17.57 | cr2_ | s/lef/elf/ |
10:25.59 | rob_w | cr2_: well i ordered one last night .. but i still dont have a order confirmation .. but normaly i sould havbe one by end of next week |
10:25.59 | cr2_ | ok. |
10:26.32 | rob_w | ihope to be able to reuse the omap stuff from the other devices to be quickly up n running. |
10:27.03 | rob_w | maybe i can arrange soon to get us a real project sponsor for a linux "captured" Phone |
10:27.38 | rob_w | iam dealing with some projects already which noticed to need of a probriatory ip-phone .. |
10:28.51 | rob_w | bbl |
10:39.00 | goxboxlive | good morning |
10:46.03 | *** join/#htc-linux Marex-notebook (n=marex@gwfm10-3-250.802.cz) |
11:04.46 | BabelO | good morning goxboxlive |
11:05.49 | BabelO | cr2_: do you learn something with nk.exe ? |
11:08.48 | *** join/#htc-linux AC_Mast27 (i=s@gateway/tor/x-211f4fe4a493188a) |
11:10.45 | cr2_ | BabelO: looking at it now. |
11:11.54 | cr2_ | BabelO: i'd like to test qtopia too. do you compile it with qtopiaroot=/usr now ? |
11:13.03 | BabelO | no, always /opt, better for my test as it is a separate directory i can remove :) |
11:13.48 | cr2_ | ok. |
11:14.25 | cr2_ | i've plotted the roadmap .svg logo, but need some refinements. |
11:14.36 | BabelO | :) |
11:15.32 | cr2_ | we need something for gps, wifi and umts. |
11:16.25 | BabelO | cr2_: yes i m looking how can i set pcmcia wifi up cause qtopia use old cardmgr :( |
11:20.39 | BabelO | cr2_: i also seem that we need to add headphone pluggedin and usb pluedin to an keyboard event definition |
11:20.46 | BabelO | like a switch |
11:21.19 | cr2_ | it's a gpio pin ? |
11:26.18 | BabelO | cr2_: yes headset is a asic3 gpio pin |
11:26.39 | goxboxlive | BabelO: with BA are you using one or two keybord/buttons driver? I am using kbdhandler and buthandler. But is that neccesary ? Could i add the universal layout casesover to htcbuttonhandler? |
11:27.11 | BabelO | goxboxlive: on universal just kbdhandler ;) |
11:27.59 | goxboxlive | BabelO: no, i need also buthandler otherwise the buttons doesnt work. But maybe a could add the buttons cases to it |
11:28.20 | goxboxlive | But i dont think it will seperate GPIO and ASIC3, or will it? |
11:28.53 | goxboxlive | Because it is the buthandler who has the GPIO/ASIC3 support |
11:30.37 | goxboxlive | But to have a common cpp file for both magician and universal is kind of tricky i think, since they have diffrents keycodes on some buttons |
11:32.48 | BabelO | goxboxlive: keycode are from kernel, so i think we can look what is wrong |
11:33.02 | goxboxlive | right |
11:39.39 | rob_w | cr2_: where is that roadmap ? |
11:40.20 | BabelO | rob_w: you want some screenshot ? else cvs is at xanadux |
11:40.53 | rob_w | well do you mean roadmap in terms of projecte management or the gps app ? |
11:41.16 | BabelO | rob_w: gps app ;) |
11:41.38 | rob_w | ok .. |
11:44.14 | *** join/#htc-linux Marex-notebook (n=marex@gwfm10-3-250.802.cz) |
11:50.27 | cr2_ | BabelO: some cryptic names, magic offsets in the GSM RAM, and some more cpu regs ;) |
11:53.49 | *** join/#htc-linux AC_Mast27 (i=s@gateway/tor/x-b96134b66e6f2944) |
11:54.12 | BabelO | good |
11:54.31 | cr2_ | demo mode in ida is too short :) |
11:55.23 | cr2_ | and the old version is a bit buggy |
11:59.23 | *** join/#htc-linux lieter (n=lieter@a62-251-100-248.adsl.xs4all.nl) |
12:00.29 | *** join/#htc-linux lieter (n=lieter@a62-251-100-248.adsl.xs4all.nl) |
12:01.21 | rob_w | tsts even the fic gta is still suffering a not working suspend |
12:07.35 | *** join/#htc-linux pH5 (n=ph5@p5485E83B.dip.t-dialin.net) |
12:10.31 | *** join/#htc-linux AC_Mast27 (i=s@gateway/tor/x-2eac331c894aa09a) |
12:28.08 | cr2_ | BabelO: updated. http://wiki.xda-developers.com/index.php?pagename=OMAP850_Registers |
12:28.29 | cr2_ | still don't see the CPLD. only the cached values in SRAM. |
12:28.55 | *** join/#htc-linux Marex-notebook (n=marex@gwfm10-3-250.802.cz) |
12:29.47 | BabelO | ok |
12:32.29 | NAiL | are you completely picking apart the omap? |
12:40.50 | *** join/#htc-linux ellisway (n=ellis@homealone.good1.com) |
12:45.35 | cr2_ | don't see any gpios in the SD. |
12:48.34 | cr2_ | BabelO: where is the omap mmc driver ? |
12:49.31 | BabelO | it seem wizard use the one in drivers/mmc with minor change |
12:50.27 | BabelO | cr2_: and this is init |
12:50.30 | BabelO | <PROTECTED> |
12:50.30 | BabelO | <PROTECTED> |
12:50.30 | BabelO | <PROTECTED> |
12:50.52 | pH5 | hi |
12:50.59 | BabelO | hi pH5 |
12:51.00 | pH5 | BabelO: do you know the mmc power gpio on artemis? |
12:51.36 | BabelO | pH5: afaik no, when i try wizard kernel, it seem mmc is well detected with sd card |
12:53.38 | cr2_ | pH5: it seems to me that the gpios are referenced from registry in the driver. but i don't see any gpio action in the BL, where there is no such junk. |
12:53.54 | cr2_ | pH5: what about SDIO on omap ? |
12:54.57 | cr2_ | pH5: have a look at the omap850 registers list. |
12:55.00 | cr2_ | OMAP850_PCC_CONF_REG |
12:55.49 | pH5 | cr2_: omap850 has sdio support, I don't know more than that. |
12:55.57 | cr2_ | is it supported ? |
12:56.07 | cr2_ | in -24-rc1 |
12:56.28 | cr2_ | BabelO: i see a quite different init in the BL. |
12:57.21 | cr2_ | pH5: btw, where is your CPLD located ? |
13:05.22 | BabelO | cr2_: possible because init have some timeout when booting wizard kernel |
13:07.35 | cr2_ | BabelO: what is 0xfffe1020 ? |
13:09.16 | BabelO | cr2_: FUNC_MUX_CTRL_7 |
13:11.00 | pH5 | cr2_: no idea about -24-rc1, I only tried it on the magician so far. |
13:11.22 | pH5 | the herald gpio extender is connected via i2c |
13:13.41 | cr2_ | BabelO: where can i see the list ? or you are talking about omap1 in general ? |
13:14.01 | BabelO | cr2_: yes omap1 in general, i got in from kernel |
13:14.21 | cr2_ | hm. |
13:14.51 | cr2_ | i'm trying to write the full omap850 list. also looking at the tornado/typhoon patches. |
13:15.14 | pH5 | I think it's incomplete. |
13:15.36 | pH5 | omap730/850 don't use the mux_ctrl, they have the mode_1 and _2 at fffe1010 and 1014 instead |
13:16.12 | pH5 | so I don't think fffe1020 can be mux_ctrl_7 on omap850. |
13:16.30 | cr2_ | pH5: not only, omap850 uses 1020 and 1024 |
13:16.42 | cr2_ | the sd init on artemis is |
13:16.50 | cr2_ | 1020 | 2 |
13:16.54 | cr2_ | 10b4 | 4 |
13:17.01 | cr2_ | 0834 | 1000 |
13:17.19 | cr2_ | so it starts with setting 1020 |
13:17.32 | pH5 | cr2_: yes, but who knows what they should be called. do you know whether they are used for mux control? |
13:17.49 | cr2_ | 10b4 is OMAP850_PCC_CONF_REG |
13:18.04 | cr2_ | | 0xfffe0834| ULPD_SOFT_REQ / OMAP850_PCC_SOFT_REQ |
13:18.17 | cr2_ | | 0xfffe10b4| OMAP850_PCC_CONF_REG |
13:18.34 | cr2_ | asking about 1020 :) |
13:20.22 | cr2_ | actually we know much more than we think. just in a spread and unsystematic manner ;) |
13:21.37 | cr2_ | this is for example -> |
13:21.39 | cr2_ | + { TYPHOON_MODEL_TORNADO, 0x03320500, 0x1b62c02f }, |
13:21.45 | cr2_ | the omap850 ID. |
13:21.49 | pH5 | cr2_: I know |
13:22.00 | cr2_ | + { TYPHOON_MODEL_TYPHOON, 0x03320300, 0x1b55f02f }, |
13:22.02 | pH5 | cr2_: where are the PCC_CONF etc definitions from? |
13:22.04 | pH5 | omap730 |
13:22.06 | cr2_ | and this one for 730 |
13:22.24 | cr2_ | pH5: from the artemis wince kernel. |
13:22.27 | cr2_ | :) |
13:22.36 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-103-152-149.karneval.cz) |
13:22.36 | pH5 | ah.. :) |
13:22.54 | cr2_ | pH5: thanks to nice guys at htc :) |
13:23.11 | cr2_ | look at your own kernel, maybe you'll see more. |
13:24.03 | pH5 | hm. the herald bootloader doesn't seem to have rbmc or similar command :/ |
13:24.10 | cr2_ | +static void __init omap_typhoon_mmc_init(void) |
13:24.25 | cr2_ | this is incomplete, when i compare it with artemis, btw. |
13:24.44 | cr2_ | pH5: did you pick the hermesRUU to your tools ? |
13:25.20 | cr2_ | it has something in common, but actually quite different in the protocol. so your time was not wasted :) |
13:29.09 | pH5 | cr2_: I just had a quick look at it yesterday. |
13:29.56 | pH5 | what does ULPD/PCC stand for btw? |
13:30.24 | pH5 | linux says fffe087c is ULPD_CAM_CLK_CTRL, for example, while the htc bootloader calls it PCC_CAM_CLK_CTRL |
13:31.37 | pH5 | my bootloader calls fffe1020 and 24 "SPARE1" and "SPARE2", whatever that is supposed to mean. |
13:34.37 | cr2_ | pH5: interesting :) |
13:34.50 | pH5 | fffecc24 (EMIFF_MRS) is "SDRAM" there |
13:34.52 | cr2_ | pH5: what is ULPD and PCC ? |
13:35.31 | cr2_ | i've added LED PWM to the table. |
13:35.52 | cr2_ | omap1 definitions do not apply 100% to omap850 |
13:36.13 | cr2_ | garmin also has a mix. |
13:36.36 | pH5 | ULPD is "ultra low-power module" |
13:36.52 | cr2_ | and PCC ? |
13:37.02 | cr2_ | 0xfffec700 OMAP_MPU_TIMER2_BASE |
13:37.06 | cr2_ | this looks strange. |
13:37.17 | pH5 | might mean "peripheral clock control", but that is just a guess |
13:37.24 | cr2_ | ok. |
13:37.42 | cr2_ | i'll look for SPARE |
13:38.09 | cr2_ | yes, SPARE1 and SPARE2. |
13:40.00 | pH5 | http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12000&contentId=4679 says that its edge digital baseband subsystem is a gsm "ULPD" |
13:40.07 | pH5 | and internal sram is 384k, not 256 as I thought. |
13:40.15 | cr2_ | yes. |
13:40.24 | cr2_ | i've seen it on the omap850 page. |
13:41.13 | cr2_ | so the SD init sequence is not right. |
13:43.22 | pH5 | cr2_: during SDInit and MegaSIMInit in SPL I have SPARE1 |= 2, SPARE2 isn't touched at all. |
13:44.24 | pH5 | there's one *fffe1060 &= ~1 during early init. any idea what that register could be? |
13:45.32 | cr2_ | SPARE1 |=2 on artemis too. |
13:45.56 | cr2_ | don't see 1060 yet. |
13:46.04 | cr2_ | as i've said: |
13:46.27 | cr2_ | SPARE |=2 |
13:46.33 | cr2_ | OMAP850_PCC_CONF_REG |=4 |
13:46.52 | cr2_ | OMAP850_PCC_SOFT_REQ |=0x1000 |
13:47.42 | cr2_ | i'm curious if the CPLD is also on i2c. |
13:48.03 | cr2_ | maybe that's why GPOA-GPOH are cached in SRAM. |
13:51.06 | cr2_ | BabelO: which UART is used by GPS ? |
13:51.27 | BabelO | cr2_: that's a good question, i try to trace them with haret but nothing :( |
13:54.03 | cr2_ | at what address range ? |
13:55.53 | cr2_ | pH5: does it say you anything ? 0-0x23f7fe00 |
13:56.38 | cr2_ | 0xdc080200 |
13:57.17 | cr2_ | lsl 1 |
13:58.05 | pH5 | cr2_: doesn't ring a bell. |
13:59.20 | cr2_ | it's in the CPLD_RegRead |
14:02.26 | cr2_ | BT is OMAP850_PCC_SOFT_REQ |=200 |
14:04.31 | cr2_ | looks like BT is on uart1. |
14:04.40 | pH5 | my SDInit sets IO_CONF2 &= 0xfff111ff and then calls PL_CPLDReadRegs(5,0x4,5) |
14:04.50 | cr2_ | BabelO: hehe. 115200 |
14:05.02 | cr2_ | pH5: looks different. |
14:05.24 | cr2_ | but PL_CPLDReadRegs name is also here. |
14:07.49 | pH5 | and then PL_SDSetSlotNumber touches gpios 16 and 19 (and calls them MPUIO_SDIF_SEL1 and MPUIO_SD_IF_SEL) |
14:08.41 | cr2_ | pH5: write a wiki page. |
14:10.10 | cr2_ | BabelO: still here ? |
14:10.15 | BabelO | cr2_: and where is it wired ? |
14:10.41 | cr2_ | omap uart1. |
14:11.15 | cr2_ | the power/reset gpio is probably easier to get with haret. |
14:11.36 | BabelO | ok |
14:11.42 | cr2_ | is BTCTL ported from gnu-haret ? |
14:12.04 | BabelO | don't know :( |
14:12.13 | BabelO | wait i start latest haret ;) |
14:13.47 | cr2_ | i don#t think so. |
14:14.30 | cr2_ | but you can try to switch BT on and off yourself. |
14:15.09 | BabelO | cr2_: it is not in help list |
14:15.23 | cr2_ | ok. |
14:15.34 | BabelO | so i trace uart1 ? |
14:15.47 | Kevin2 | Hi |
14:15.57 | BabelO | hi Kevin2 |
14:16.29 | cr2_ | BabelO: you can, but the BL says it's on uart1 |
14:16.33 | cr2_ | hi Kevin2 |
14:16.49 | cr2_ | BabelO: you need to find the power/reset gpios. |
14:21.37 | BabelO | cr2_: ok i see some irqs when power up |
14:22.24 | BabelO | 003.088 IRQS IH2: IH2-15(47)=1 |
14:22.24 | BabelO | 003.088 IRQS IH2: IH2-57(89)=1 |
14:23.20 | cr2_ | pH5: how to "redo analysis" in ida ? |
14:25.38 | pH5 | hi Kevin2 |
14:30.30 | pH5 | from the herald bootloader it looks like it has acx100 behind a ti1250 sdio interface. |
14:33.20 | cr2_ | pH5: it's the same on all other phones. |
14:34.02 | cr2_ | but is the full operation going through sdio ? |
14:34.20 | cr2_ | or only some init/eeprom management. |
14:35.31 | cr2_ | pH5: if we will find it out for one phone, it's probably the same on all others. |
14:58.01 | pH5 | cr2_: do you know anything about fffba800 or fffec808 ? |
15:00.34 | cr2_ | pH5: reset_wlan uses the CPLD |
15:00.45 | cr2_ | nothing more than in the wiki. |
15:00.51 | pH5 | ok |
15:05.11 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-103-152-149.karneval.cz) |
15:06.44 | cr2_ | 0x30674 |
15:06.49 | cr2_ | oops |
15:06.55 | cr2_ | 0x305674 |
15:11.40 | cr2_ | debug gsmdsp index val |
15:13.41 | cr2_ | BabelO: uart2 is irda |
15:13.52 | cr2_ | BabelO: so only uart3 remains for gps |
15:14.37 | cr2_ | pH5: wifi init is really complex. |
15:14.45 | BabelO | no irda on artemis |
15:15.11 | cr2_ | pH5: what was cpld(5,5,5) ? |
15:17.47 | cr2_ | on artemis it's (3,1,1)+(5,2,1) for power, (5,4,1)+(5,4,0)+(5,4,1) for reset |
15:18.29 | cr2_ | BabelO: it's just not used. athena also doesn't have irda, but the code is there. |
15:20.15 | pH5 | afaict herald doesn't have irda either |
15:20.37 | pH5 | depending on the function, the variables are (register, ormask, andmask) or (register, mask, on/off) |
15:20.44 | pH5 | s/variables/parameters/ |
15:21.11 | BabelO | cr2_: uart3 look reasonnable, it is hardware port in windows for gps. this one is used by a driver which create a virtual com 4 port for agps feature |
15:21.15 | cr2_ | do you have the driver for it ? |
15:23.28 | BabelO | cr2_: yes you got it on my ftp , there is a serial_gps.dll |
15:24.17 | cr2_ | BabelO: i meant i2c driver by pH5 |
15:25.53 | cr2_ | pH5: it's LED pwm (0x80 here) and enable (=1) |
15:39.04 | *** join/#htc-linux goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
15:48.31 | *** join/#htc-linux ImCoKeMaN (n=me@rrcs-67-78-122-67.sw.biz.rr.com) |
15:57.28 | *** join/#htc-linux dion (n=dion@inhex.net) |
16:05.25 | cr2_ | BabelO: does your touchscreen work ? |
16:07.15 | BabelO | cr2_: no, i setup is gpio 76 and setup also spi port with tsc2046, but i press the screen device freeze, same as if i start command top, or just press any button |
16:07.29 | cr2_ | which spi port ? |
16:08.55 | BabelO | <PROTECTED> |
16:08.56 | BabelO | <PROTECTED> |
16:09.26 | cr2_ | i mean here: http://wiki.xda-developers.com/index.php?pagename=OMAP850_Registers |
16:09.28 | BabelO | many omap device are setup like this, so i try |
16:09.56 | BabelO | it is called uwire |
16:10.47 | cr2_ | this is against this diagramm: |
16:10.49 | cr2_ | http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12000&contentId=4679 |
16:13.53 | cr2_ | lol |
16:13.55 | cr2_ | Supports all leading operating systems |
16:14.08 | cr2_ | uWire |
16:14.08 | cr2_ | SPI |
16:14.23 | cr2_ | they are separate subsystems |
16:14.44 | BabelO | hm i check again |
16:15.03 | cr2_ | SmartCard interface |
16:15.15 | cr2_ | this one we have not seen. |
16:16.04 | BabelO | 1-wire and HDQ interface |
16:17.32 | cr2_ | let's find tsc2046 first, and where it is connected. |
16:20.46 | goxboxlive | cr2_: why is it better to have qtopia running from /usr/share instead of /opt/Qtopia ?? |
16:20.58 | cr2_ | pH5: do you have a full patch for herald ? |
16:21.08 | cr2_ | goxboxlive: /usr |
16:21.31 | goxboxlive | cr2_: ok, . But why? |
16:21.35 | cr2_ | because you don't need any paths. |
16:21.39 | goxboxlive | ok |
16:21.41 | pH5 | cr2_: no, I'm booted BabelO's kernel with small modifications |
16:21.45 | pH5 | s/'m// |
16:21.53 | cr2_ | the binaries are in /usr/bin |
16:22.09 | cr2_ | libraries in /usr/lib |
16:22.45 | BabelO | cr2_: http://linuxbox2.free.fr/artemis/patch/ |
16:22.50 | cr2_ | pH5: does your ts work ? |
16:23.16 | cr2_ | BabelO: a big patch :) |
16:25.05 | cr2_ | video/omap/sensor_ov9640.c |
16:25.32 | BabelO | :) |
16:27.34 | cr2_ | tornado has a ts ? |
16:28.50 | BabelO | ,o |
16:28.58 | BabelO | no |
16:33.21 | pH5 | cr2_: no |
16:33.40 | cr2_ | hm. |
16:34.27 | cr2_ | i don't have omap, can you trace the working touchscreen ? |
16:37.38 | cr2_ | 0xb80* block. |
16:39.04 | BabelO | i try |
16:39.10 | *** join/#htc-linux ltxda00 (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |
16:45.31 | BabelO | cr2_: lot of traces :( |
16:46.27 | pH5 | cr2_: in the bootloader I have many accesses to 0x8fb* |
16:46.42 | *** join/#htc-linux AC_Mast (i=s@gateway/tor/x-18e3b7c83d8826d6) |
16:48.31 | cr2_ | pH5: strange. http://wiki.xda-developers.com/index.php?pagename=ArtemisMemoryMap |
16:49.10 | cr2_ | BabelO: can you get out the address column | sort | uniq ? |
16:50.06 | pH5 | cr2_: it's nearly the same as TornadoMemoryMap - should we pool those pages together as we did for HTC_Serial? |
16:50.22 | cr2_ | the ts driver is real bloatware. |
16:50.31 | cr2_ | pH5: yes. |
16:50.54 | cr2_ | i think all omap850 phones seem to be very compatible. |
16:51.12 | cr2_ | i wonder if that applies for gpio too. |
16:52.19 | cr2_ | decoding the gpio I/O direction may be the first step. |
16:52.34 | cr2_ | can you post the direction registers ? |
16:52.53 | cr2_ | for your 2 devices. |
16:53.08 | cr2_ | then we can join it with tornado. |
16:54.35 | BabelO | cr2_: ftp://82.238.28.28:7147/artemis/touchscreen |
16:54.51 | BabelO | cr2_: but lot of trace for nothing with this filter :( |
16:55.12 | cr2_ | can't get it. |
16:55.31 | cr2_ | hehe. found mov r0, 0xd0 and mov r0, 0x90 :) |
16:55.56 | BabelO | cr2_: ftp://invite:invite@82.238.28.28:7147/artemis/touchscreen |
16:56.24 | BabelO | i ve a silly ftp server :( |
16:56.26 | cr2_ | lsl 24 too :) |
16:57.38 | BabelO | pH5: how can i decode with offline log ? |
16:59.32 | pH5 | cr2_: gpio direction control registers on running herald: 81f6ff6f 00000ff9 fff0ffff efffffff 80773ffa ffffffff |
16:59.44 | cr2_ | c1000 offset |
17:00.27 | cr2_ | pH5: i wish Kevin2 has restored DUMPGPIO as a virtual function for different archs. |
17:00.56 | cr2_ | :) |
17:01.49 | Kevin2 | cr2_: Huh? |
17:02.19 | cr2_ | pH5: 0xfffc1000 is not in the list :) |
17:02.44 | cr2_ | Kevin2: there was a DUMP GPIO command for pxa |
17:03.05 | Kevin2 | You can use "watch gpio" instead. |
17:03.08 | cr2_ | which gave a formatted and decoded gpio dump. |
17:03.23 | cr2_ | yeah, it's the purist approach :) |
17:03.47 | cr2_ | tell that to somebody with kaiser/titan ;-) |
17:04.07 | cr2_ | otherwise we had this list already.. |
17:04.18 | Kevin2 | Shrug - I'm okay with adding a per-cpu "dump gpio" to haret -- it's just that nobody has been writing them. |
17:04.44 | cr2_ | well, i can't do everything :) |
17:04.47 | pH5 | the problem is that interpreting the results can become quite complicated on things like omap :) |
17:05.04 | Kevin2 | We need to know the Kaiser/titan gpio registers. Until we know that, we can't use "watch gpio" or implement a "dump gpio". |
17:05.47 | cr2_ | pH5: can oyu trace 0xfffc1000 ? imho this is the TS SPI port. |
17:06.21 | cr2_ | Kevin2: http://wiki.xda-developers.com/index.php?pagename=TitanMemoryMap |
17:07.04 | cr2_ | 0xb2b00000 and 0xb2a00000 |
17:07.51 | cr2_ | 5 banks. |
17:08.08 | cr2_ | but not all 32bits are gpios. |
17:08.58 | cr2_ | hmm. where did i put the list. |
17:09.43 | Kevin2 | cr2_: It's pretty straight forward to extend "watch gpios" to work - just run a bunch of "addlist gpio <addr>" and then test it. Do we have anyone here who can test? |
17:11.10 | Kevin2 | pH5: Were you saying that interpreting the results is hard on omap with "watch gpios"? |
17:12.37 | cr2_ | Input_Level0 (0......15) --- Addr=0x%x, Val=0x%x |
17:12.40 | cr2_ | Input_Level1 (16....42) --- Addr=0x%x, Val=0x%x |
17:12.40 | cr2_ | Input_Level2 (43....67) --- Addr=0x%x, Val=0x%x |
17:12.40 | cr2_ | Input_Level3 (68....94) --- Addr=0x%x, Val=0x%x |
17:12.40 | cr2_ | Input_Level4 (95..105) --- Addr=0x%x, Val=0x%x |
17:12.58 | pH5 | Kevin2: no, it is hard to determine what a given gpio actually does because the omap mux configuration is more complicated than the pxa "alternate functions" |
17:13.25 | cr2_ | 5 banks, only these bits are meaningful. |
17:13.25 | pH5 | and I have next to no knowledge about omap850 mux controls (or, the MODE/SPARE registers) |
17:14.35 | cr2_ | pH5: but the I/O is ok ? |
17:17.22 | cr2_ | 4,6,8,a,c,e 16bit regs |
17:17.54 | cr2_ | bit 1 of 6 is rx/tx_ready. (busy loop) |
17:17.59 | cr2_ | don't remember the PXA names. |
17:18.38 | cr2_ | 0x5d -> reg4 |
17:19.06 | cr2_ | 0x0 -> regc |
17:20.56 | cr2_ | rega is low 8bit, reg8 is upper 8bit of data |
17:22.39 | cr2_ | of data_write |
17:22.57 | cr2_ | regc and rege of data_read |
17:23.03 | cr2_ | that's all. |
17:23.45 | cr2_ | pH5: can you check it ? |
17:23.53 | goxboxlive | cr2_: what about this one? http://svn.openezx.org/branches/kernel-2.6.16.13-patches/ezx_camera.patch |
17:24.40 | cr2_ | goxboxlive: yes. but we need to strip it from other stuff |
17:24.52 | pH5 | cr2_: a second.. |
17:24.57 | cr2_ | and add our power on/enable. |
17:24.59 | goxboxlive | ok |
17:28.07 | Kevin2 | bbl |
17:34.27 | cr2_ | BabelO: i see timer activity, gpio bank 5, ... |
17:35.11 | BabelO | cr2_: you are on my log ? |
17:35.28 | BabelO | cr2_: normally touchscreen is just after gpio 76 |
17:36.16 | cr2_ | BabelO: catched some more unknown registers :) |
17:43.11 | cr2_ | BabelO: looks better. but i don't see the ts regs i've seen in touch.dll ;) |
18:02.39 | cr2_ | BabelO: can you trace more ? |
18:03.07 | cr2_ | fgrep mmutrace toushcreen | awk '{print $5}' | sort | uniq |
18:03.17 | cr2_ | that's what i'm interested in. |
18:10.33 | pH5 | re |
18:10.39 | pH5 | cr2_: sorry, what did you want me to check? |
18:11.28 | cr2_ | trace the page at 0xfffc1000 while using the TS. |
18:12.05 | cr2_ | should be 0xb80c1000 |
18:13.39 | pH5 | hm, how was tracing done again. |
18:13.52 | pH5 | just setting addlist mmutrace p2v(0xfffc1000) 0x1000 |
18:13.58 | pH5 | and then wi yields nothing |
18:17.01 | cr2_ | is it mapped somewhere else ? |
18:17.06 | cr2_ | look at dump mmu |
18:23.38 | cr2_ | pH5: do you have touch.dll ? |
18:30.12 | pH5 | cr2_: no no, b80 is fff here |
18:31.59 | pH5 | I have touch.dll, but I can't find anything about b80 in there. |
18:32.32 | cr2_ | pH5: search for 0x5d |
18:32.38 | cr2_ | mov r1, 0x5d |
18:32.57 | cr2_ | e3a0105d mov r1, #93 ; 0x5d |
18:32.59 | pH5 | The bootloader has a TouchPanelSPIRWCommand, it also uses accesses to 0x8fb..., do we have any info about the bootloader mappings? |
18:33.38 | cr2_ | on artemis it's the same as in wince |
18:33.43 | cr2_ | no 0xafb* |
18:34.22 | pH5 | got it |
18:34.32 | pH5 | it's at 0x22b78 |
18:34.53 | pH5 | bbiab |
18:42.46 | cr2_ | pH5: the bootloader is even more direkt than touch.dll |
18:43.10 | cr2_ | movl r3, 0xfffc1000 |
18:45.49 | cr2_ | yes, it's the same code in the bl. |
18:47.57 | pH5 | cr2_: the only places where fffc1000 appears in the herald bootloader are two assignments *0x8fb03ea0 = 0xfffc1000; |
18:49.58 | cr2_ | how did you get the bl ? |
18:50.05 | pH5 | SPL.nb |
18:50.17 | cr2_ | decode it |
18:50.44 | pH5 | huh? it's decoded and disassembled already |
18:50.46 | cr2_ | with dumprom.exe |
18:50.56 | cr2_ | ok. |
18:51.19 | cr2_ | can you send it to me ? |
18:51.35 | pH5 | cr2_: the nbx or the asm text? |
18:52.11 | cr2_ | nb |
18:52.43 | cr2_ | the artemis bl also has a direct 1:1 mapping . that's reasonable. |
18:57.21 | pH5 | cr2_: sent via mail to hh.org |
18:57.46 | cr2_ | ok. |
19:09.48 | cr2_ | pH5: it's lost somewhere on the way. |
19:10.38 | *** join/#htc-linux rob_w (n=bob@X1025.x.pppool.de) |
19:11.19 | pH5 | anyway, I'm stupid. 8fb is inside the ram mapping (last MB of the 60MB system ram) |
19:11.41 | pH5 | http://en.pastebin.ca/752802 <-- that's my bootloader mapping |
19:13.01 | cr2_ | pH5: in the BL ? not 1:1 map ? |
19:13.38 | pH5 | affirmative |
19:14.10 | pH5 | only omap registers are mapped 1:1 |
19:14.18 | cr2_ | ok. |
19:14.27 | cr2_ | can you grep for 0xfffc1000 |
19:14.45 | cr2_ | yes, it's stored to some buffer. |
19:15.06 | cr2_ | to be picked up later near this mov r1,0x5d |
19:15.35 | pH5 | ok, got it. |
19:16.06 | pH5 | it goes through a level of indirection, but TouchPanelSPIRWCommand calls a function that writes to 0xffc1000 |
19:16.13 | cr2_ | well, but why can't it be traced. |
19:16.14 | cr2_ | yes. |
19:16.37 | cr2_ | is your dump mmu >150K ? |
19:19.40 | pH5 | yes |
19:19.46 | cr2_ | hm. |
19:20.05 | cr2_ | where is the 0xfffc1000 mapped ? |
19:21.21 | pH5 | b801c000 |
19:21.49 | pH5 | that is inside the b80 1MB section (D=0, AP=1) |
19:22.52 | cr2_ | ok, but is there any other mapping ? |
19:24.41 | pH5 | can't find any. no coarse, no 4k. |
19:26.40 | cr2_ | weird. |
19:27.01 | cr2_ | Kevin2 has written a spi.c tool for pxa |
19:27.14 | cr2_ | maybe you can change it for omap ? |
19:27.30 | cr2_ | and query the tsc2046 aka well-known chip :) |
19:27.57 | cr2_ | in linux. |
19:28.51 | cr2_ | or maybe it's easier just to write the driver. |
19:32.16 | cr2_ | i think the ts problem is solved :) |
19:33.38 | BabelO | back |
19:34.05 | pH5 | BabelO: wb |
19:34.10 | pH5 | cr2_: how so? |
19:36.10 | cr2_ | pH5: the bl and wince can't be wrong. |
19:36.57 | cr2_ | BabelO: you may check it too. |
19:37.11 | pH5 | cr2_: aye. |
19:37.28 | BabelO | cr2_: what ? |
19:37.29 | pH5 | hm. usb charging is controlled by poking the GSM_CTRL registers |
19:38.56 | cr2_ | AT+CBC ? |
19:40.45 | cr2_ | BabelO: addlist mmutrace 0xb80c1000 4096 |
19:40.54 | BabelO | ok |
19:41.01 | cr2_ | and touch the screen. |
19:41.42 | rob_w | pH5: seems those gsm chips are more used to wire up device controls these days |
19:42.40 | cr2_ | pH5: i guess you should just write a simple driver. |
19:44.09 | BabelO | cr2_: nothing appear :( |
19:44.52 | BabelO | cr2_: only IRQS GIRQ3: IS76(172)=1 but htat's normal |
19:45.44 | cr2_ | omap is weird. |
19:48.03 | BabelO | cr2_: do you have my memory map ? |
19:49.29 | cr2_ | BabelO: dump mmu ? |
19:54.10 | BabelO | cr2_: ok i llok if i have already it ;) |
19:55.39 | BabelO | wouah ;) i see a progress bar during dump mmu command :( hmm |
19:58.59 | BabelO | cr2_: ftp://invite:invite@82.238.28.28:7147/artemis |
20:04.37 | cr2_ | BabelO: what about gps ? |
20:05.19 | BabelO | cr2_: i ve to trace it , wait i plug artemis to wall power as qtopia say ;) |
20:05.20 | cr2_ | can you trace it at 0xb80b9800 ? |
20:06.24 | cr2_ | pH5: i guess that the SD problem will be solved too, once the CPLD r/w is sorted out. |
20:06.48 | cr2_ | then the omap850 will be usable as a pda. |
20:06.57 | pH5 | wow. looks like xsvf execution code is left in the herald bootloader |
20:07.05 | cr2_ | i'll leave you the gsm :) |
20:07.12 | cr2_ | what is xsvf ? |
20:07.14 | pH5 | cr2_: yes, I want cpld asap |
20:07.20 | pH5 | cr2_: google xilinx xsvf :) |
20:07.56 | cr2_ | the cpld upload ? |
20:07.59 | pH5 | yes, seems like the htc guys wanted to try modifying the cpld without jtag adaptors. |
20:08.55 | cr2_ | nice. |
20:09.31 | cr2_ | i always wondered what this 'cpld upload' meaned :) |
20:10.51 | goxboxlive | cr2_: qtopia-core builded for me in OE. Wasent it tsdogs who had some problem with it? |
20:11.29 | cr2_ | don't remember. have not tried to build it. |
20:11.42 | cr2_ | opie and moko fail building for me. |
20:12.56 | cr2_ | pH5: are you sure that the cpld is accessed over i2c ? |
20:13.30 | cr2_ | sound really funny for me, to make a gpio expander in such a way. |
20:14.13 | rob_w | cr2_: i lately got a xilinx cpld programmer device |
20:14.20 | rob_w | but i didnt use it yet |
20:16.17 | cr2_ | rob_w: you are a real hw hacker :) |
20:16.47 | rob_w | judging from my tools, yes , judging from my achievements, no |
20:17.05 | rob_w | but i give my best to grow in that ;-) |
20:17.32 | cr2_ | at least you have the right toys^H^Hools |
20:17.46 | rob_w | so with those mmu dumps you look up the physical address in the spec docs and see where those are mapped virtually ? |
20:17.55 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
20:18.12 | cr2_ | yes. because for the mmutrace you need the virtual addresses. |
20:18.33 | rob_w | ok |
20:19.14 | cr2_ | maybe haret should take care of multiple mappings itself. |
20:19.14 | rob_w | how far ist the omap850 at the moment ? as a rough summary ? |
20:19.34 | cr2_ | it boots :) |
20:19.53 | cr2_ | there are problems with SD and the TS. |
20:20.05 | cr2_ | we have found the problem with SD today. |
20:20.15 | rob_w | great .. so that leaves ts ? |
20:20.18 | cr2_ | and as you can see i've found the TS. |
20:20.32 | rob_w | is this qualcomm gsm thingi accessible through a serial at ? |
20:20.35 | cr2_ | so pH5 only needs to write the small driver :) |
20:20.48 | cr2_ | which qualcomm gsm ? |
20:21.10 | rob_w | any ? |
20:21.20 | cr2_ | or you mean the ti gsm on omap850 phones ? |
20:21.32 | rob_w | isnt that qualcomm ? |
20:21.57 | cr2_ | qualcomm is CDMA and WCDMA aka umts/hsdpa/etc. |
20:22.34 | rob_w | ah ok . there is no umts omap device |
20:22.36 | rob_w | got you |
20:25.01 | rob_w | those omaps will also use those tsc22Xx crap`S .. same as BA ? right |
20:25.26 | cr2_ | no. |
20:25.30 | cr2_ | tsc2046 |
20:25.53 | cr2_ | as in universal/hx4700/sable/others. |
20:26.50 | rob_w | oh ok |
20:27.08 | rob_w | the touch on the universal had this issue with alignments , right ? |
20:27.23 | cr2_ | no. |
20:27.48 | cr2_ | it was a problem in a lower-power mode. |
20:28.01 | cr2_ | once you provide more power, it works ;) |
20:28.25 | cr2_ | at least on the universal is was a problem. |
20:28.45 | rob_w | uh really ,, that sounds mean |
20:30.07 | cr2_ | well, it's the same in wince. |
20:30.58 | cr2_ | BabelO: when you use wifi, can you trace the SD register area ? |
20:31.07 | rob_w | crap there is not naked picutre or chip list for htc elf yet |
20:31.17 | cr2_ | BabelO: i don't want to believe that it all goes over SDIO. |
20:31.51 | cr2_ | rob_w: all these omap850 phones are more or less the same. |
20:32.23 | rob_w | hmm that sounds promising .. also the omap1510 like the hq6315 ? |
20:32.40 | BabelO | cr2_: nothing to trace, i just see gps irq :( |
20:33.01 | cr2_ | BabelO: what is gps irq ? |
20:33.10 | cr2_ | uart3 irq ? |
20:33.23 | *** join/#htc-linux Mineque (n=Mineque@195.60.65.50) |
20:35.34 | goxboxlive | cr2_: have you seen the Imate 9502. It has great specs. |
20:37.03 | BabelO | cr2_: IRQS IH2: IH2-14(46)=1 |
20:39.00 | rob_w | so but yet the omap850 is a armv5te like target ? |
20:43.06 | cr2_ | BabelO: i don't know omap IH2 very good. |
20:43.06 | rob_w | anyway i will clone omap1510.conf and create it as htcelf.conf and see if gpephone-image builds through |
20:43.34 | cr2_ | rob_w: userspace is your last problem ;) |
20:43.42 | rob_w | BabelO: so you are working on a omap 850 currently ? |
20:44.04 | cr2_ | rob_w: he has artemis, and pH5 has herald |
20:44.31 | rob_w | so which kernels / toolchain did you use yet for those ? |
20:44.37 | cr2_ | goxboxlive: did you boot 2.6.23 on the universal ? |
20:44.39 | BabelO | rob_w: a little this day, i need to finish a qtopia project before ;) |
20:44.45 | pH5 | cr2_: any idea how to get to the value of 0x8fb00520 in ram (bootloader) when I don't find the assignment in disassembly and the bootloader doesn't have rbmc? |
20:44.56 | goxboxlive | cr2_: yes |
20:45.15 | cr2_ | pH5: map the ram. |
20:45.17 | cr2_ | hmm. |
20:45.20 | BabelO | cr2_: it is interrupt bank 2 irq 14 i think it is |
20:45.23 | cr2_ | in the bootloader |
20:45.38 | cr2_ | BabelO: it should refer to some internal device. |
20:46.12 | cr2_ | pH5: there _may_ be some other bl commands. |
20:47.01 | cr2_ | goxboxlive: so it works ? do you have a zimage ? i'm interested how it will behave if i'll insert the SDIO gps. |
20:47.23 | cr2_ | goxboxlive: but SDIO should be enabled, and sdio_uart too. |
20:48.02 | goxboxlive | cr2_: it didint include the sdio_uart |
20:48.49 | cr2_ | goxboxlive: 2.8" vga is silly. |
20:48.59 | pH5 | 2.8" vga is nice |
20:49.06 | goxboxlive | :-) |
20:49.21 | cr2_ | can you include sdio_uart ? i don't care about gui and will login over usb. |
20:49.25 | goxboxlive | It has everything, just lacks a faster cpu |
20:49.51 | pH5 | goxboxlive: does it have a graphics accelerator? |
20:49.59 | cr2_ | pH5: i couldn't see a difference between the moko LCD and universal at such laserprinter dpi values :) |
20:50.16 | cr2_ | goxboxlive: which cpu it is ? |
20:50.58 | goxboxlive | cr2_: i dont know how to do it, since it just configure in OE. I dont know how to compile the -23 kernel manually |
20:51.02 | goxboxlive | pH5: i dont know |
20:51.13 | goxboxlive | cr2_: qulacomm 7200 400Mhz |
20:52.05 | cr2_ | goxboxlive: ok, do you have a zimage ? |
20:52.05 | goxboxlive | cr2_: i'cc check,hold on |
20:52.05 | cr2_ | 7200 is UMTS, 7500 is CDMA ? |
20:52.17 | goxboxlive | no idea |
20:52.31 | cr2_ | i think so. |
20:52.59 | goxboxlive | cr2_: i have the modules and the zImage. Hold on i upload it |
20:54.29 | goxboxlive | cr2_: http://www.linuxtogo.org/~htcpxa/htcuniversal/tmp/ |
20:54.35 | cr2_ | goxboxlive: it will be great to have the linload.exe, but i can do it myself :) |
20:54.46 | goxboxlive | :-) |
20:55.00 | cr2_ | btw, what should i do with the modules ? |
20:55.08 | goxboxlive | cr2_: ok lets make a deal. I'll make the linoad.exe. for you and you make me the cam diver |
20:55.15 | cr2_ | i wish we will solve this problem too. |
20:55.17 | cr2_ | lol |
20:55.28 | goxboxlive | you can check and see if the sdio module are there |
20:56.33 | cr2_ | hm. it should not work, but let's try. |
20:56.37 | goxboxlive | pH5: i dont remember how i made the htcpxa ftp account at linuxtogo. But isent it enough just to login in over ftp with the username and pass i made when i got registerd at theur web site? |
21:01.31 | pH5 | goxboxlive: I don't know about ftp, but you can use ssh. |
21:01.55 | pH5 | hm. ftp login works, too. |
21:02.49 | cr2_ | goxboxlive: linload rulez. |
21:03.05 | goxboxlive | pH5: i know ftp logins works, also ssh , but it doesnt accept my password. Strange it should be the same as on the website |
21:03.05 | cr2_ | goxboxlive: now i only need no sign it with the ms cert ;-) |
21:03.21 | goxboxlive | :-) |
21:03.28 | cr2_ | lol. angstrom in ascii art |
21:03.50 | goxboxlive | I am not using linload. I like the old fashion way :-) |
21:04.15 | pH5 | goxboxlive: I just logged into ftp and ssh successfully, with the htcpxa account. what more do you need? |
21:04.27 | cr2_ | qtopia4 on the uni is cool. |
21:05.00 | cr2_ | goxboxlive: what is the usb ip ? |
21:05.23 | goxboxlive | pH5: i need my own space :-D (cool line ) . I dont think i should mix up Openezx stuff and HTC stuff |
21:05.53 | goxboxlive | cr2_: that has nothing to do with the zImage |
21:06.00 | goxboxlive | angstrom uses 192.168.0.202 |
21:06.23 | cr2_ | ok. |
21:06.38 | cr2_ | lol, i can't take out the SD card to test sdio ;) |
21:07.13 | cr2_ | urgently need the mdoc-g3/4 driver ;) |
21:07.15 | goxboxlive | :-) |
21:07.36 | cr2_ | or the ramdisk with modules. |
21:07.48 | cr2_ | ok, but it will not work anyway. |
21:07.54 | goxboxlive | cr2_: actually you can, but be sure to have the thin you are going to test loaded before you take the SD card out. I have done it before :-) |
21:08.03 | pH5 | goxboxlive: sorry, I didn't realize that you were making a new account. |
21:08.58 | goxboxlive | pH5: i added some magician images today. Test out the Qtopia image, it looks real nice. |
21:09.44 | cr2_ | the SDIO bank on asic3 is separate from SD. |
21:09.46 | goxboxlive | The openmoko ias builded with openmoko distro. Sees like they have fixed the top bar for qvga devices |
21:10.11 | cr2_ | goxboxlive: does the cam work on a780 ? |
21:10.17 | goxboxlive | cr2_: no |
21:10.32 | cr2_ | but it was working ? |
21:10.40 | goxboxlive | cr2_: no |
21:10.54 | cr2_ | ok. |
21:10.55 | pH5 | goxboxlive: I know, it was a mb-panel2 bug. I'm looking forward to try the Qtopia images tomorrow |
21:11.05 | pH5 | gotta go now |
21:11.08 | pH5 | 'night everyone |
21:11.37 | goxboxlive | cr2_: i made a Qtopia image for A780, it runs quite good. You should try it. |
21:11.48 | cr2_ | how ? |
21:12.08 | goxboxlive | it's easy |
21:12.18 | cr2_ | if i-mate Ultimate 9502 has qualcomm cpu, i doubt that its 2D accel is better than ATI's. |
21:13.09 | goxboxlive | create a ext2 partion on the second partition on your Transflash card. Extract the image and boot with ezxboot-usb (it uploads the zImage to ram). |
21:13.28 | goxboxlive | cr2_: http://www.linuxtogo.org/~htcpxa/tmp/ |
21:16.09 | cr2_ | ./ezx-boot-usb is a x86 app ? |
21:16.16 | goxboxlive | cr2_: yes |
21:16.17 | cr2_ | will it work on amd64 ? |
21:16.30 | goxboxlive | i think so, you have to be root to run it |
21:16.37 | cr2_ | it may use some wird libusb calls |
21:17.11 | goxboxlive | ok |
21:17.39 | cr2_ | is it possible to create a ezx-boot-usb1 ? |
21:17.49 | cr2_ | to boot from the first partition ? |
21:18.04 | goxboxlive | cr2_: yes, it's just to edit the source. |
21:18.50 | cr2_ | because i hate repartitioning. |
21:19.00 | goxboxlive | I am using a precompiled one from OE, but i guess it will be easy to change it. It is the same as pH5 are using for his magician and with that one is doable. |
21:19.08 | cr2_ | hmm. i need to find a microsd card first. |
21:19.22 | goxboxlive | hold on let me check and find the source |
21:19.42 | cr2_ | i've even booted partitionless :) |
21:21.50 | goxboxlive | cr2_: i think this one boots from the first partition: http://www.openembedded.org/~koen/a780/ezx-boot-usb |
21:21.59 | cr2_ | ok, found a 2GB microsd card. |
21:22.01 | goxboxlive | not sure though |
21:24.56 | goxboxlive | Yes i think it should boot from the first partition |
21:25.54 | goxboxlive | cr2_: anyway,here is the source: http://svn.openezx.org/trunk/src/host/boot_usb/ |
21:28.16 | goxboxlive | hmm i cant find the path in the source, maybe it is kernel zImage relevant. It might be hardcoded in it. |
21:30.37 | goxboxlive | cr2_: i think you have to create a second partition, it is in the kernel defconfig i think, as CMD= something |
21:32.43 | goxboxlive | cr2_: this is set in the kernel config: CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000" |
21:33.17 | cr2_ | ok. |
21:34.05 | goxboxlive | Why dont we do the same so we can get rid of the startup.txt |
21:34.48 | cr2_ | we need linload.exe |
21:35.08 | cr2_ | what buttons should i press. |
21:35.33 | goxboxlive | cam+held volume in + hit the power button |
21:35.56 | cr2_ | with the phoe switched off ? |
21:36.00 | goxboxlive | yes |
21:36.42 | cr2_ | ok. |
21:37.15 | cr2_ | Unable to claim usb interface 1 of device: could not claim interface 0: Device or resource busy |
21:37.33 | cr2_ | usb 2-1: new device found, idVendor=22b8, idProduct=6003 |
21:37.33 | cr2_ | usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 |
21:37.33 | cr2_ | usb 2-1: Product: Motorola Ezx Bootloader |
21:37.33 | cr2_ | usb 2-1: Manufacturer: Motorola Inc. |
21:37.33 | cr2_ | usb 2-1: configuration #1 chosen from 1 choice |
21:37.40 | goxboxlive | cr2_: you have to be root |
21:37.53 | goxboxlive | su |
21:38.00 | cr2_ | uid=0(root) gid=0(root) Gruppen=0(root),14(uucp),300(idl),65534(nogroup) |
21:39.47 | cr2_ | recompiling. |
21:41.25 | cr2_ | ./ezx_boot64 |
21:41.25 | cr2_ | Serching for EZX phone: A780/E680 found. |
21:41.25 | cr2_ | FAILED: usage: ./ezx_boot64 <kernel> [cmdline] [initrd] |
21:41.35 | *** join/#htc-linux Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
21:41.46 | cr2_ | x86 sux ;) |
21:42.35 | goxboxlive | cr2_: have you added the kernel zImage? |
21:42.42 | goxboxlive | it looks good |
21:43.11 | goxboxlive | take the zImage from the /boot folder in the image and place it in the same folder as ./ezx_boot64 |
21:43.54 | cr2_ | <PROTECTED> |
21:44.07 | cr2_ | <PROTECTED> |
21:44.10 | goxboxlive | Then run './ezx_boot64 zImage-2.6.23.1-ezxdev' |
21:44.24 | goxboxlive | You have to add the zImage you want it to upload |
21:44.41 | cr2_ | need to unpack the root |
21:45.53 | cr2_ | got qtopia. |
21:45.58 | cr2_ | where is the zimage ? |
21:46.04 | goxboxlive | in the boot folder |
21:46.47 | cr2_ | do i need to format the first partition ? |
21:47.00 | goxboxlive | i dont think so, since we dont use it |
21:48.16 | cr2_ | ok. |
21:48.46 | cr2_ | i enjoy the blue screen. |
21:48.51 | goxboxlive | :-) |
21:49.25 | cr2_ | how big is the mdoc on uni ? |
21:49.29 | cr2_ | 128MB ? |
21:49.38 | goxboxlive | no idea |
21:49.53 | goxboxlive | have you booted it? |
21:50.20 | cr2_ | 128 |
21:50.29 | cr2_ | ba is 64 + 32 NOR. |
21:51.14 | cr2_ | if you'll push qtopia under 64MB, then ba will be dualboot :) |
21:51.47 | goxboxlive | i think BabelO can do that. |
21:52.12 | cr2_ | ./ezx_boot64 zImage-2.6.23.1-ezxdev |
21:52.12 | cr2_ | Serching for EZX phone: A780/E680 found. |
21:52.12 | cr2_ | Uploading kernel: 20% |
21:52.33 | cr2_ | waits |
21:52.34 | goxboxlive | good , lets see if it find your rootfs |
21:53.10 | cr2_ | nothing happens. |
21:53.22 | goxboxlive | has it uploaded 100% yet? |
21:53.33 | goxboxlive | It take some times until it boots |
21:53.34 | cr2_ | no. stays at 20% |
21:53.39 | goxboxlive | hmm strange |
21:54.01 | goxboxlive | it shouldnt, has never happend for me before |
21:54.49 | cr2_ | how do i reset it now ? |
21:54.58 | goxboxlive | battery |
21:55.16 | cr2_ | ok |
21:55.49 | cr2_ | ./ezx_boot64 zImage-2.6.23.1-ezxdev |
21:55.49 | cr2_ | Serching for EZX phone: A780/E680 found. |
21:55.49 | cr2_ | Uploading kernel: 100% OK |
21:55.49 | cr2_ | Calling the kernel... |
21:55.49 | cr2_ | DONE |
21:56.03 | cr2_ | penguinz on the screenz |
21:56.07 | goxboxlive | :-) |
21:56.22 | cr2_ | A is cut in angstrom |
21:56.40 | goxboxlive | bootsplash? |
21:57.01 | cr2_ | avahi |
21:57.11 | cr2_ | starting qtopia |
21:57.18 | cr2_ | qvncserver |
21:57.18 | goxboxlive | good it found your rootfs, then your on :-) |
21:57.26 | cr2_ | no modem |
21:57.38 | cr2_ | no voip |
21:57.47 | cr2_ | full signal ;) |
21:57.57 | cr2_ | battry full on. |
21:58.14 | cr2_ | the ts is ok ) |
21:58.29 | goxboxlive | Yes, first time i tested the battery meter worked, but now it allways show full |
21:58.55 | cr2_ | the skin is too dark to my taste :) |
21:59.08 | cr2_ | i want white and flashy :) |
21:59.29 | goxboxlive | Yes, also the buttons, i have some problem with the numeric ones, but they work if you open the dialer the close the flip and dial a number. |
21:59.39 | cr2_ | old qtopia is shit. |
21:59.44 | cr2_ | i never us the kb |
21:59.46 | goxboxlive | cr2_: it's fast also on A780, dont you think that too ? |
21:59.56 | cr2_ | yes. |
22:00.09 | cr2_ | will be even faster with ATI accelfb. |
22:00.18 | goxboxlive | If you hold in the volume button you will get a shutdown menu |
22:00.22 | goxboxlive | ok |
22:00.30 | cr2_ | no bt ? |
22:00.50 | goxboxlive | I havent got Qtopia to handle BT on neithe devices |
22:01.00 | cr2_ | it's very fast |
22:01.18 | cr2_ | need to kill qdsync and mediaserver. |
22:01.28 | goxboxlive | You have ti start BT manually from shh and the you can search for oither devices. But i dont know if you can pair with other |
22:01.35 | cr2_ | they eat 16MB ram from 48 available. |
22:01.37 | goxboxlive | mediaserver isent included |
22:01.44 | BabelO | goxboxlive: i found that battery meter work on ba now ;) it was Tasks.cfg |
22:01.48 | cr2_ | good. |
22:02.08 | goxboxlive | BabelO: cool, pastebin please. Does italso animate while charging? |
22:02.30 | cr2_ | goxboxlive: now, what about copilot ? :) |
22:02.48 | goxboxlive | cr2_: It's included, dont you see it :-D |
22:02.54 | BabelO | goxboxlive: no, just look at you Tasks.cfg and you understand, if you forgot to change Ficgta01 in this file ;) |
22:02.57 | goxboxlive | But you have to reboot your phone |
22:03.02 | cr2_ | i don't care about the phone, but want gps and copilot. |
22:03.07 | goxboxlive | BabelO: ahh thx |
22:03.37 | goxboxlive | cr2_: what about gpsd and roadmap. The gps driver for A780 is allmost finished |
22:03.49 | cr2_ | goxboxlive: we need to write the mux also for a780 ? |
22:04.02 | cr2_ | almost ? |
22:04.16 | cr2_ | does it suppoort raw access ? |
22:04.28 | cr2_ | or only this lapi |
22:04.42 | goxboxlive | i dont know what that is |
22:05.00 | cr2_ | i've pressed on lock :( |
22:05.22 | cr2_ | how do i unlock it? |
22:05.28 | goxboxlive | cr2_: ssh to it and restart qpe.sh |
22:05.33 | cr2_ | ok. |
22:05.50 | goxboxlive | You have to hitthe asterisk, but thats the only key event i havent managed to work |
22:05.51 | cr2_ | btw, it's running from SRAM |
22:06.02 | cr2_ | unlike the display on the universal. |
22:06.11 | cr2_ | so it's faster. |
22:06.40 | goxboxlive | BabelO: i havent renamed my files to htcphone, i am using ficgat01, so my battery should be named ficgta01. |
22:06.44 | goxboxlive | ok |
22:06.45 | cr2_ | haha. no rndis here : |
22:07.09 | BabelO | goxboxlive: ok, it is the name of the class inside the file ;) |
22:07.36 | cr2_ | asoc: PCAP2 STEREO <-> pxa2xx-ssp3 mapping ok |
22:07.37 | cr2_ | asoc: PCAP2 MONO <-> pxa2xx-ssp3 mapping ok |
22:07.37 | cr2_ | asoc: PCAP2 BP <-> Baseband mapping ok |
22:07.55 | goxboxlive | BabelO: over my knowledge |
22:08.06 | cr2_ | Creating 6 MTD partitions on "PXA27x flash": |
22:08.10 | cr2_ | 0x00000000-0x00020000 : "Bootloader" |
22:08.10 | cr2_ | 0x00020000-0x00100000 : "Kernel" |
22:08.10 | cr2_ | 0x00120000-0x01a00000 : "rootfs" |
22:08.10 | cr2_ | 0x01a00000-0x01f80000 : "VFM_Filesystem" |
22:08.10 | cr2_ | 0x01fa0000-0x01fc0000 : "setup" |
22:08.10 | cr2_ | 0x01fc0000-0x01fe0000 : "Logo" |
22:08.18 | cr2_ | the mdoc-g3 is also not supported |
22:08.28 | cr2_ | lol. |
22:08.38 | cr2_ | where is the copilot ? |
22:09.06 | goxboxlive | cr2_: i havent included that, how do i do that? Will that work? |
22:09.18 | cr2_ | what ? |
22:09.21 | cr2_ | pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878 |
22:09.22 | cr2_ | pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008 |
22:09.23 | goxboxlive | copilot |
22:09.29 | cr2_ | this is easy to correct. |
22:09.45 | cr2_ | you need the original qtopia libs for it. |
22:09.56 | cr2_ | i doubt it's statically linked. |
22:10.03 | cr2_ | but don't really know. |
22:10.16 | goxboxlive | ok |
22:10.25 | cr2_ | drivers/char/ts0710_mux_usb.c: USB Host(Bulverde) IPC driver registered. |
22:10.26 | cr2_ | drivers/char/ts0710_mux_usb.c: 1.0alpha1:USB IPC Driver (TS07.10 lowlevel) |
22:10.33 | cr2_ | the demux is there |
22:10.41 | cr2_ | so gpsd may work |
22:10.47 | goxboxlive | ohh |
22:10.53 | cr2_ | time to subscribe to openezx ml :) |
22:11.00 | goxboxlive | :-) |
22:11.35 | cr2_ | tell koen to fix the LCCR0 setting contains illegal bits :) |
22:11.45 | cr2_ | he will love you :) |
22:12.03 | cr2_ | VFS: Can't find a valid FAT filesystem on dev mmcblk0p1. |
22:12.27 | cr2_ | ALSA device list: |
22:12.27 | cr2_ | <PROTECTED> |
22:12.34 | goxboxlive | It wouldnt harm :-) |
22:12.51 | cr2_ | USER PID PU %MEM VSZ RSS TTY STAT START TIME COMMAND |
22:13.07 | cr2_ | root 1336 0.0 10.6 18676 4928 ? S< 00:01 0:00 /opt/Qtopia/bin/mediaserver |
22:13.20 | cr2_ | root 1338 0.2 18.5 27608 8576 ? S 00:01 0:01 /opt/Qtopia/bin/qdsync -noshow |
22:13.31 | cr2_ | root 1335 0.2 16.4 27124 7580 ? S 00:01 0:02 /opt/Qtopia/bin/sipagent -noshow |
22:13.39 | goxboxlive | ohh i thought it wherent there because i didnt compile with qtopiamedia |
22:13.47 | cr2_ | i want to kill all three |
22:14.09 | *** join/#htc-linux lieter (n=lieter@a62-251-100-248.adsl.xs4all.nl) |
22:14.21 | cr2_ | with 48M every bit counts |
22:14.24 | goxboxlive | cr2_: if you have ip tables set on your computer i think you just can install gpsd |
22:14.36 | cr2_ | for roadmap :) |
22:14.40 | goxboxlive | yes :-) |
22:15.02 | cr2_ | root@a780:~$ free |
22:15.02 | cr2_ | <PROTECTED> |
22:15.02 | cr2_ | Mem: 46148 44920 1228 0 604 27648 |
22:15.28 | cr2_ | i don't have iptables. |
22:15.42 | goxboxlive | ok |
22:16.17 | cr2_ | root@a780:~$ hcitool scan |
22:16.17 | cr2_ | Device is not available: No such device |
22:16.44 | cr2_ | od -x /dev/mux14 |
22:17.04 | cr2_ | i think it depends on the phone on, of something weird like that. |
22:17.17 | goxboxlive | ok |
22:17.18 | cr2_ | root@a780:~$ od -x /dev/mux14 |
22:17.18 | cr2_ | od: /dev/mux14: No such device |
22:17.18 | cr2_ | od: /dev/mux14: Bad file descriptor |
22:17.38 | goxboxlive | is the phone drivers included? |
22:17.39 | cr2_ | sound ? |
22:17.49 | goxboxlive | works in Qtopia |
22:17.55 | cr2_ | cat /boot/zImage > /dev/dsp ? |
22:18.20 | cr2_ | cat .ash_history > /dev/dsp |
22:18.21 | cr2_ | nice. |
22:18.25 | goxboxlive | cr2_: just start astroids, it's agmae. |
22:18.42 | goxboxlive | game |
22:18.49 | cr2_ | screen locked. |
22:18.54 | cr2_ | i need gps :) |
22:19.00 | goxboxlive | you will hear sond when firering with the joystic |
22:19.02 | cr2_ | and roadmap |
22:19.16 | cr2_ | why not install sox ? |
22:19.32 | goxboxlive | edit defaultbuttons.conf and set touchscreen as inputmethod |
22:19.39 | goxboxlive | not keypad |
22:19.49 | goxboxlive | Then you wouldnt have the lock screen isuue anymore |
22:19.58 | goxboxlive | I have to fix the keypad asterix |
22:19.59 | cr2_ | i'll better run sox from the console, than wasting 8MB ram for some fancy mediaserver. |
22:20.00 | goxboxlive | sk |
22:20.06 | goxboxlive | :-) |
22:20.56 | cr2_ | trying to mount the mtd partitions. |
22:21.04 | goxboxlive | ohh |
22:21.22 | cr2_ | MUX DLCI:0 Send SABM timeout! |
22:21.22 | cr2_ | MUX: Can't connect server channel 0! |
22:21.55 | cr2_ | i think ezxd should be running ? |
22:22.06 | cr2_ | but it's better to run gps without the phone. |
22:22.06 | goxboxlive | ok |
22:22.28 | cr2_ | does it suspend ? |
22:22.35 | goxboxlive | I'll test install gpsd |
22:22.39 | goxboxlive | dont know |
22:25.26 | cr2_ | Alignment trap: dd (1421) PC=0x0001641c Instr=0xe1ce21d0 Address=0x00086ca4 FSR 0x013 |
22:26.21 | cr2_ | h3600_ts |
22:26.21 | cr2_ | h3600_tsraw |
22:26.27 | cr2_ | ancient rootfs :) |
22:27.13 | cr2_ | brokenHeart.gif |
22:27.45 | cr2_ | HelixSDK_10_0 |
22:27.47 | goxboxlive | cr2_: Where is the gps port? |
22:28.13 | cr2_ | libezx3dgraphics-xscale-r.so |
22:28.16 | cr2_ | oo. |
22:28.32 | cr2_ | i think /dev/mux14 |
22:28.38 | cr2_ | look into the openezx wiki |
22:29.16 | cr2_ | libqte-mt-xscale-r.so |
22:29.24 | cr2_ | libipp-ac-iwmmxt-r.so |
22:29.46 | cr2_ | ah, now i know the name of this shitty font |
22:29.48 | cr2_ | AlbanyMotorola.ttf |
22:31.30 | cr2_ | databases on mtd3 |
22:31.42 | goxboxlive | cr2_: i have started gpsd, now what? How do i check if it works? |
22:32.23 | cr2_ | telnet localhost gpsd |
22:32.23 | goxboxlive | <PROTECTED> |
22:32.41 | cr2_ | 2947 or something like taht |
22:33.24 | cr2_ | Entrust Secure Server.cer |
22:33.44 | cr2_ | hehe. |
22:33.59 | cr2_ | it seems that copilot is on mdoc-g3 |
22:34.55 | cr2_ | root@a780:~$ apm --suspend |
22:34.55 | cr2_ | apm: Function not implemented |
22:35.57 | cr2_ | hellomoto |
22:36.56 | cr2_ | agps does not pop up |
22:37.15 | cr2_ | heh. appeared now :) |
22:41.27 | goxboxlive | is this good |
22:41.29 | goxboxlive | oot@a780:~$ telnet localhost 2947 |
22:41.29 | goxboxlive | Console escape. Commands are: |
22:41.29 | goxboxlive | <PROTECTED> |
22:41.29 | goxboxlive | <PROTECTED> |
22:41.29 | goxboxlive | <PROTECTED> |
22:41.30 | goxboxlive | <PROTECTED> |
22:41.32 | goxboxlive | continuing... |
22:41.34 | goxboxlive | GPSD |
22:41.38 | goxboxlive | r |
22:41.42 | goxboxlive | GPSD,R=1 |
22:41.44 | goxboxlive | GPSD,R=0 |
22:42.11 | cr2_ | goxboxlive: how do i kill pin on a780 ? |
22:42.41 | goxboxlive | cr2_: no idea, i just use the phone. Havent played with it |
22:43.17 | cr2_ | it's nice anyway. |
22:43.41 | cr2_ | i can remove java, and use gps in a normal way. |
22:44.18 | goxboxlive | I know i cant receive gps signals here where i am sitting. |
22:44.48 | goxboxlive | MUX DLCI:0 Send SABM timeout! |
22:44.48 | goxboxlive | MUX: Can't connect server channel 0! |
22:44.53 | cr2_ | yes. |
22:45.16 | cr2_ | it's not yet ready to be used. |
22:45.41 | goxboxlive | ok |
22:47.04 | cr2_ | gps works again :) |
22:49.35 | goxboxlive | in the original mode ? |
22:49.46 | cr2_ | yes. |
22:49.58 | cr2_ | can you remove the rootdelay ? |
22:50.12 | cr2_ | http://lists.openezx.org/pipermail/openezx-devel/2007-October/001614.html |
22:50.44 | goxboxlive | i think you can do it yourself with setting the CMDLINE= after zImage |
22:50.50 | cr2_ | hehe |
22:50.52 | cr2_ | http://lists.openezx.org/pipermail/openezx-devel/2007-October/001616.html |
22:52.18 | cr2_ | so it's just broken. |
22:53.49 | cr2_ | goxboxlive: we need to do something about wince5 second edition. |
22:54.10 | cr2_ | on universal |
22:54.47 | goxboxlive | yes |
22:55.07 | goxboxlive | i gree, we needto do much on universal to have it working well. |
22:55.14 | goxboxlive | i have to go now. It's late |
22:55.18 | goxboxlive | good night |