00:07.30 | *** join/#htc-linux Hawk|- (n=Hawk@p5B179A75.dip0.t-ipconnect.de) |
00:54.51 | *** join/#htc-linux ragnar (n=ragnar@88.85.53.174) |
00:55.06 | ragnar | scatterp-: g'evening |
01:10.43 | scatterp- | hi HiXiH |
01:12.23 | scatterp- | any one here can help me with linux on the blueangel i am at console but i can not use the function key so can not type numbers move back and forwards etc i need to fdisk /dev/sda1 |
01:35.45 | *** join/#htc-linux Whiteruskii (n=Whiterus@c-65-96-9-52.hsd1.ma.comcast.net) |
01:37.45 | Whiteruskii | <PROTECTED> |
01:37.59 | scatterp- | which phone do you have ? |
01:38.08 | Whiteruskii | <PROTECTED> |
01:38.34 | scatterp- | ok |
01:38.49 | scatterp- | where are you lost ? |
01:39.02 | Whiteruskii | I'm not sure where to start :-p |
01:39.02 | scatterp- | i just installed it my self 2 seconds ago i have a blue angeel |
01:39.11 | scatterp- | ok hmm |
01:39.20 | Whiteruskii | I found the download, but I don't know what to do with the file. |
01:39.29 | scatterp- | ok one sec |
01:39.36 | Whiteruskii | k |
01:39.48 | Whiteruskii | <PROTECTED> |
01:40.08 | scatterp- | http://handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux |
01:40.10 | scatterp- | fo here |
01:40.12 | scatterp- | go here |
01:40.19 | scatterp- | go down to installation instructions old |
01:40.24 | scatterp- | download all the files |
01:40.31 | scatterp- | put them in a folder on your phone |
01:40.41 | scatterp- | then run the haret.exe file from your phone |
01:40.54 | scatterp- | you will need to download haret.exe from somewhere else if you dont have it already |
01:40.58 | scatterp- | past that i dont know |
01:41.12 | Whiteruskii | <PROTECTED> |
01:41.26 | Whiteruskii | how's the phone work on yours? |
01:41.36 | scatterp- | so far it does not |
01:41.39 | Whiteruskii | heh |
01:41.52 | scatterp- | i am here because i can not type numbers or anything that uses the function key |
01:42.05 | Whiteruskii | oh, I see |
01:42.09 | Whiteruskii | hm |
01:42.47 | Whiteruskii | <PROTECTED> |
01:43.42 | scatterp- | k |
01:43.44 | scatterp- | cool |
01:44.00 | scatterp- | im testing the files from that page you was on to see if they work any better |
01:44.34 | Whiteruskii | k |
01:44.39 | Whiteruskii | can't hurt! |
01:48.06 | HiXiH | scatterp-: hey man, long time no see |
01:53.57 | *** join/#htc-linux silven (n=zmc@adsl-64-237-236-57.prtc.net) |
01:54.00 | scatterp- | hey |
01:54.13 | scatterp- | lets talk in message |
01:54.44 | scatterp- | oh wait |
01:54.48 | scatterp- | join #scatterp |
02:26.19 | *** part/#htc-linux Whiteruskii (n=Whiterus@c-65-96-9-52.hsd1.ma.comcast.net) |
02:44.52 | *** join/#htc-linux ketrox_ (n=ketrox@Xc716.x.pppool.de) |
02:55.08 | *** join/#htc-linux the_sys0p` (n=the_sys0@cpe-66-75-196-173.bak.res.rr.com) |
03:14.16 | *** join/#htc-linux ketrox__ (n=ketrox@Yb79d.y.pppool.de) |
04:03.27 | scatterp- | can any one help me with linux on the blue angel ? |
04:11.40 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-74-5-37.dynamic.dsl.as9105.com) |
04:18.13 | *** join/#htc-linux regulate (i=regulate@notchill.com) [NETSPLIT VICTIM] |
04:18.13 | *** join/#htc-linux KimuSan^ (n=kimusan@ip205.tankegang.dk) [NETSPLIT VICTIM] |
04:18.13 | *** join/#htc-linux Foxdie (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) [NETSPLIT VICTIM] |
04:18.19 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-74-5-37.dynamic.dsl.as9105.com) |
04:18.19 | *** join/#htc-linux HiXiH (n=ragnar@88.85.53.174) [NETSPLIT VICTIM] |
04:18.19 | *** join/#htc-linux Kevin2 (n=Kevin@207-237-65-88.c3-0.avec-ubr12.nyr-avec.ny.cable.rcn.com) [NETSPLIT VICTIM] |
04:18.27 | *** join/#htc-linux Hawk|- (n=Hawk@p5B179A75.dip0.t-ipconnect.de) [NETSPLIT VICTIM] |
04:18.27 | *** join/#htc-linux wireddd (n=wired@97-81-78-105.dhcp.athn.ga.charter.com) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux ketrox (n=ketrox@Yb79d.y.pppool.de) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux the_sys0p` (n=the_sys0@cpe-66-75-196-173.bak.res.rr.com) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux TBBle (n=tbble@2001:388:f000:0:0:0:0:2d) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux edison (i=oystein@homelien.no) [NETSPLIT VICTIM] |
04:18.50 | *** join/#htc-linux TeringTuby (n=maarten@82.210.117.162) |
05:14.21 | scatterp- | can any one help me with linux on the blue angel ? |
05:40.37 | *** join/#htc-linux goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
05:51.57 | scatterp- | hey goxboxlive long time |
05:54.25 | goxboxlive | hi scatterp- |
05:56.10 | scatterp- | goxboxlive i left my universal in a taxi :( |
05:56.57 | scatterp- | but now i have a blueangel could you help me to get as far as fdisk to partition the sdcard i have a 4gb card but i cant get linux working properly |
05:56.58 | goxboxlive | :-) what device do you have now? |
05:57.08 | scatterp- | blueangel |
05:57.15 | scatterp- | its not the same depressing |
05:57.17 | goxboxlive | scatterp-: tjhere is a howto at hh.org wiki |
05:57.32 | goxboxlive | i know BabelO made a howto for the BA |
05:57.34 | scatterp- | yeah i read that and followed it loged in as root |
05:57.41 | scatterp- | but the problem is i cant use the function keys |
05:57.47 | scatterp- | that means i cant type 1 |
05:57.56 | scatterp- | as in fdisk /dev/sda1 |
05:58.09 | goxboxlive | http://www.handhelds.org/moin/moin.cgi/BlueAngelHowtoInstallLinux |
05:58.16 | scatterp- | also i cant move left and right i was trying to get a 1 useing the tab key but didnt work out |
05:58.20 | scatterp- | yeah thats what i followed |
05:58.29 | goxboxlive | hmm i c |
05:58.29 | scatterp- | but the keyboard does not work... |
05:58.34 | goxboxlive | ok |
05:58.41 | scatterp- | i can login :/ |
05:58.49 | goxboxlive | do you have a linux computer? |
05:59.05 | scatterp- | oddly the thing i miss most about the universal is the twisting motion when you open it up :( |
05:59.20 | scatterp- | no my linux computer is stuck in england and i flew out to costa rica |
05:59.31 | goxboxlive | but now you have 128MB ram. It will be faster than universal |
05:59.38 | goxboxlive | ok |
05:59.42 | scatterp- | yes but the speakers are not as good |
05:59.56 | scatterp- | so when your listening to music it just does not do it :( |
06:00.02 | goxboxlive | download a live linux cd and ssh in to the BA |
06:00.12 | goxboxlive | ok |
06:00.16 | scatterp- | well i could ssh from puty in windows |
06:00.24 | scatterp- | but there does not seem to be ip support there |
06:00.29 | scatterp- | i tryed to modprobe usb |
06:00.31 | scatterp- | and it did not work |
06:00.51 | scatterp- | windows detects it as a "ethernet gadget" i dont know if i need a driver for that |
06:01.55 | *** join/#htc-linux okias (n=okias@esthe.cust.centro-net.cz) |
06:05.31 | goxboxlive | scatterp-: ok i dont know if it wil work with wondows or not. I havent tried my self. Only live cd is what i know of. Maybe there is a win32 application that are able to create a linux filesystem. |
06:09.38 | scatterp- | ok i think i found a way to connect rebooting to test |
06:24.50 | scatterp- | haveing some technical issues ill let you know when in console may be a few minites |
06:26.26 | scatterp- | had the wrong startup.txt |
06:29.01 | scatterp- | ok im in console im trying to install the driver windows side one sec |
06:38.53 | *** join/#htc-linux dion (n=dion@inhex.net) |
06:46.00 | scatterp- | hmm |
06:46.05 | scatterp- | this ways not working out |
06:46.18 | scatterp- | surely theres got to be a version with working keyboard ? |
06:47.54 | scatterp- | microsoft supply some kind of template for a rndis driver but you have to finish codeing it and i dont know how |
06:56.42 | scatterp- | ahh i managed to work out a way to run fdisk instead of /sda1 i did /sda and then it didnt work so i checked /dev/ and it has not registered my card |
06:56.51 | scatterp- | so it doesnt seem to be detected any ideas ? |
06:58.26 | *** part/#htc-linux okias (n=okias@esthe.cust.centro-net.cz) |
06:59.32 | *** join/#htc-linux jott_ (n=j@unaffiliated/jott) |
06:59.38 | *** join/#htc-linux ketrox (n=ketrox@Yb79d.y.pppool.de) |
07:13.07 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-d221.84-47-21.t-com.sk) |
07:22.48 | *** join/#htc-linux pH5 (n=ph5@p5485D19C.dip.t-dialin.net) |
08:12.41 | *** join/#htc-linux Dreaddddd (i=nofear@212.58.189.6) |
08:13.12 | Dreaddddd | hi |
08:14.02 | Dreadddddd | hi |
08:15.30 | Dreadddddd | i see some HTC PDA or Smartphone on chipset from Qualcomm |
08:15.42 | Dreadddddd | chipset name MSM6250 |
08:15.55 | pH5 | hi Dreadddddd |
08:15.58 | Dreadddddd | i have some question about it |
08:17.18 | Dreadddddd | what model of pda or smarthone what use Qualcomm MSM6250 / |
08:17.19 | Dreadddddd | ? |
08:20.48 | pH5 | Dreadddddd: afaik HTC Universal and HTC Hermes use it as a phone chipset |
08:27.57 | *** join/#htc-linux Dreadddddd (i=nofear@91.145.242.224) |
08:28.03 | Dreadddddd | sorry |
08:28.07 | Dreadddddd | bad conection |
08:28.16 | pH5 | [10:20] <pH5> Dreadddddd: afaik HTC Universal and HTC Hermes use it as a phone chipset |
08:28.20 | Dreadddddd | [..::11:17:09::..] <Dreadddddd> what model of pda or smarthone what use Qualcomm MSM6250 / |
08:28.20 | Dreadddddd | [..::11:17:10::..] <Dreadddddd> ? |
08:28.20 | Dreadddddd | [..::11:17:37::..] -> [pH5] PING |
08:28.31 | Dreadddddd | mm... |
08:29.06 | Dreadddddd | somything OS for example WM5 preinstaled on this mobile ? |
08:29.51 | Dreadddddd | or BREW platform using ? |
08:30.12 | pH5 | Universal and Hermes are WM5 devices (but we're working hard to change that to linux), for Hermes there is a WM6 update available from HTC. |
08:30.15 | pH5 | BREW? |
08:31.18 | Dreadddddd | www.qualcomm.com/brew |
08:31.53 | Dreadddddd | pH5 this phones used NAND flash ? and multiboot ? |
08:33.25 | pH5 | afaik they use DiskOnChip G3 for flash, no idea about multiboot. |
08:33.34 | pH5 | but they don't use the MSM6250 as applications processor |
08:33.44 | pH5 | universal is a pxa270, hermes a s3c2442 |
08:34.12 | pH5 | the qualcomm is used just as gsm chipset running radio firmware, nothing more. |
08:34.26 | Dreadddddd | hm.. |
08:34.58 | Dreadddddd | I wont preinstaled WM on my Siemens SXG75 |
08:35.06 | pH5 | the htc kaiser uses some qualcomm chipset as applications processor, too. I think MSM7200 |
08:35.29 | Dreadddddd | wait please |
08:35.50 | Dreadddddd | i give u information about multiboot in my mobile.. |
08:37.42 | Dreadddddd | pH5 u want to say that i cannot run WM or Linux on me phone ? |
08:40.15 | pH5 | Dreadddddd: no, I don't want to say that. I don't know anything about siemens sxg75. |
08:45.38 | Dreadddddd | http://www.forum.allsiemens.com/viewtopic.php?t=44399 |
08:45.52 | Dreadddddd | please read LazyC0DEr's post |
08:47.32 | Dreadddddd | we cannot change our SW thats way we wont preinstal WM or Linux |
08:48.40 | Dreadddddd | u can read this topic http://www.forum.allsiemens.com/viewtopic.php?t=45382 |
08:48.57 | Dreadddddd | something on english meeting in |
08:49.53 | Dreadddddd | without fulldatasheet about chipset MSM6250 |
08:49.59 | Dreadddddd | we cannot start work |
08:51.10 | *** join/#htc-linux ketrox (n=ketrox@Yb79d.y.pppool.de) |
08:52.21 | Dreadddddd | Build Type : [SGLPK]= Siemens Generated Linux build with Production Key |
08:52.30 | Dreadddddd | some linux is preinstaled in mobile |
08:52.44 | Dreadddddd | but this linux is closed |
08:52.58 | Dreadddddd | and information about it.. nothing |
08:53.27 | Dreadddddd | pH5 what do u think about it ? |
08:53.30 | pH5 | uh, that's ugly :( |
08:53.44 | pH5 | is there some way to extract and disassemble the rom images? |
08:53.46 | Dreadddddd | udly - ? |
08:54.06 | Dreadddddd | hm.. |
08:54.12 | Dreadddddd | 1 second |
08:54.13 | pH5 | ugly meaning not good at all. |
08:54.31 | pH5 | this phone only runs signed code? |
08:54.34 | Dreadddddd | http://forum.modopo.com/diskussionen-rund-ums-modding/t-14747-ef81-experimentelle-soft-fuer-die-amssmbn/page1.html |
08:55.02 | Dreadddddd | this program can disassemble SW |
08:55.55 | Dreadddddd | [..::11:54:26::..] <pH5> this phone only runs signed code? - not understend that does it mind ? |
08:56.25 | Dreadddddd | this people speak russian |
08:57.03 | pH5 | yeh, me don't. german/english/french and some 日本語 only |
08:57.15 | Dreadddddd | *man not people ) |
08:57.26 | Dreadddddd | ?—???¬e?z |
08:57.33 | pH5 | japanese |
08:57.40 | Dreadddddd | ou.. |
08:58.10 | Dreadddddd | -) |
08:58.59 | Dreadddddd | pH5 we cannot change SVN = SW without CRC signature |
09:00.01 | Dreadddddd | if we change onli one for example P key on F key all 256 CRC will be change |
09:02.27 | pH5 | wow, I'm happy that pxa27x is such an open platform. I can run any arm code I want, just by flashing it directly after the original bootloader. |
09:02.36 | pH5 | on my phone |
09:02.50 | Dreadddddd | -) |
09:02.55 | Dreadddddd | luky |
09:03.08 | pH5 | yes indeed |
09:03.31 | pH5 | sorry, so I have no experience with all this signature stuff. |
09:04.04 | Dreadddddd | final question |
09:05.51 | Dreadddddd | phone that work on qualcomm chipset and phone that use it how GSM module bat not work on this is too same diferent ? |
09:06.09 | Dreadddddd | sorry for my bad English :) |
09:08.03 | pH5 | well, on universal and hermes, you have the pxa27x or s3c2442 processor, and you can run any code you want on them. |
09:08.36 | pH5 | in those phones the qualcomm chip only runs the gsm code and the software on it can't be changed |
09:08.51 | pH5 | to the applications processor, this chip looks like an AT command modem. |
09:09.22 | Dreadddddd | JTAG only can help me preinstall Linux ? :D |
09:10.27 | pH5 | Dreadddddd: I fear yes, either that or some clever hacking. perhaps the signing keys could be found out or faked or something like that. |
09:11.07 | Dreadddddd | hm.. |
09:12.13 | Dreadddddd | but my mobile phone too use same proccessor |
09:13.07 | pH5 | Dreadddddd: yes, but it has different nand flash contents, different software running. |
09:13.14 | pH5 | you have to change the software on the msm chip. |
09:13.16 | Dreadddddd | ARM926EJ-S |
09:13.33 | pH5 | universal and hermes don't, they can just change the software for the pxa27x or s3c2410 chip |
09:14.00 | Dreadddddd | whan i connect phone to computer |
09:14.06 | scatterp- | hi can any one help me with installing linux on the htc blue angel ? |
09:14.13 | Dreadddddd | dev name show me toshiba_th58dyg02a |
09:16.00 | pH5 | hi scatterp-, I guess I can help with the easy/generic questions, for more BA specific stuff, you can ask Babel0. |
09:16.34 | Dreadddddd | pH5 in some place i read that first and second bootloader that write in NAND flash programming in qualcomm when chipset maked |
09:16.53 | scatterp- | ph5 i am trying to get as far as fdisk so i can partion my memory card i installed and the card is not detected i dont know if i installed the latest version or not |
09:17.12 | scatterp- | any method to wipe the partition table would be great right now its messed up |
09:18.49 | Dreadddddd | pH5 but same soft can write in phone image (bootloader + ams (SW) + EFS (FileSystem)) |
09:19.24 | Dreadddddd | nobody tri it.. becouse nobody dont know can it kill phone or not ) |
09:19.25 | Dreadddddd | The QPST Gang Image Tool is used to create a binary file suitable for use by an offline programmer, such as Data I/O ProLINE RoadRunner™ or Data I/O FlashPAK™. |
09:19.26 | Dreadddddd | The tool requires a golden phone to be connected by a data cable to the computer hosting the tool. The golden phone is programmed with a boot loader and AMSS image by JTAG or QPST Software Download. The phone is also loaded with EFS files and NV items by other QPST tools, e.g., EFS Explorer and Software Download. |
09:19.32 | pH5 | scatterp-: dd if=/dev/zero of=/dev/sda bs=512 count=1 |
09:20.15 | scatterp- | ok |
09:20.19 | pH5 | so the bootloader that you can flash is the second stage part only? |
09:22.31 | Dreadddddd | i dont know becouse my english to bad ) |
09:24.33 | scatterp- | for some reason it booted with a messed up keyboard im rebooting it also i have been unable to type numbers previously |
09:24.50 | scatterp- | so there may be an issue with typeing the bs=512 count=1 |
09:26.21 | scatterp- | i cant type = |
09:26.31 | scatterp- | the function key does not work... |
09:26.35 | pH5 | scatterp-: ssh login or sd card reader on pc? |
09:26.47 | scatterp- | ssh card reader no |
09:26.59 | scatterp- | i could ssh if i could get ip communication |
09:27.17 | scatterp- | but i think the simplest method is to use maybe newer files or something |
09:27.34 | scatterp- | seems strange that some one made a linux install that does not have a functioning keyboard |
09:27.51 | scatterp- | most likely theres newer or better files some where |
09:28.03 | scatterp- | or maybe its possible to edit the files some how and change the keymap |
09:28.12 | scatterp- | so that the required keys are available |
09:28.40 | scatterp- | going in to /dev/ and looking for sda does not show it as being there.. |
09:29.48 | pH5 | scatterp-: I didn't know you were doing it on the phone. there it's /dev/mmcblk0 |
09:30.12 | pH5 | no idea about the keymap, I've yet to get a device with a keyboard :) |
09:31.51 | scatterp- | http://ibot.rikers.org/%23htc-blueangel/20051218.html.gz |
09:32.02 | scatterp- | the fn key issueis mentioned here |
09:32.47 | *** join/#htc-linux Guest9999 (i=nofear@91.145.221.172) |
09:33.19 | Dreadddddd | bad conection |
09:33.23 | scatterp- | checking if its there one moment |
09:38.03 | scatterp- | sorry it keeps booting and haveing issues with the kb |
09:38.27 | scatterp- | i just saw something on boot up |
09:38.35 | scatterp- | that indicates it found the sd card |
09:38.41 | scatterp- | says its 4gb which is true |
09:38.58 | scatterp- | danm every time i try to login it says "key unhandled" |
09:39.06 | scatterp- | not sure why its doing that all of a sudan |
09:40.06 | scatterp- | well thats good news at least its detected |
09:40.25 | pH5 | :) |
09:40.33 | scatterp- | ok rebooting again |
09:40.38 | pH5 | we learn to be happy with the small things here |
09:41.03 | scatterp- | some one once said if linux worked the way it was intended the world would be perfect :) |
09:41.55 | scatterp- | i think its there |
09:43.06 | scatterp- | im going to try over writeing the files |
09:43.12 | scatterp- | maybe one of them is corupt |
09:43.21 | scatterp- | it keeps saying the "key unhandled" when i try to log in |
09:44.49 | *** part/#htc-linux Dreadddddd (i=nofear@91.145.221.172) |
09:55.05 | scatterp- | ok got the keyboard to life |
09:55.12 | scatterp- | now for the new problem :( |
09:57.16 | scatterp- | ok i tryed fdisk /dev/mmc/blk0 |
09:57.17 | scatterp- | it says |
09:57.29 | scatterp- | you will not be able to write the partion table |
09:57.45 | scatterp- | unable to read /dev/mmc/blk0/ |
09:58.35 | scatterp- | sorry something come up here thank you for the help have to go mini emergancy |
10:00.44 | pH5 | scatterp-: ok, cu later. it seems you're using quite an old kernel. |
10:06.09 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-74-5-37.dynamic.dsl.as9105.com) |
10:10.35 | *** join/#htc-linux bd2_ (n=cbou@85.21.88.2) |
10:14.27 | *** join/#htc-linux NickBee (n=NickBee@122.162.81.100) |
10:14.57 | NickBee | Hi pH5 |
10:22.36 | NickBee | I need some help with qtopia and windows mobile bluetooth PAN |
10:22.50 | NickBee | anyone? |
10:23.33 | NickBee | i have reached a point, where i can ping my windows mobile from linux |
10:23.53 | NickBee | but when i try to ping to internet address, it says: "hostname not found" |
10:24.21 | NickBee | i tried adding the route as well with "route add default gw 192.168.0.1" but it doesn't seems to work |
10:25.13 | NickBee | so i see bnep0, but in routing table i see the gateway set as '*", can it be the issue? |
10:25.14 | ketrox | probably |
10:25.21 | NickBee | any ideas how can i get over it? |
10:25.32 | ketrox | specify your dns |
10:25.46 | NickBee | windows mobile "internet sharing app" does show that the device is connected |
10:25.52 | NickBee | how can do that ketrox? |
10:26.21 | ketrox | don't know exactly how NickBee |
10:26.34 | NickBee | Ok |
10:27.09 | NickBee | spent all day today to get to this point and seems i need to spend a couple of hours more to get across this hurdle :) |
10:27.11 | ketrox | try to ping the adresse ip pf google(not the host name) |
10:27.19 | NickBee | ok |
10:27.22 | NickBee | let me try |
10:28.18 | pH5 | hi NickBee, ketrox |
10:28.26 | ketrox | hi |
10:28.34 | NickBee | hi |
10:29.29 | NickBee | do need to do bnep0 up as eth0 etc ? |
10:30.07 | pH5 | NickBee: no, setting up the routes on bnep0 should work just fine |
10:30.31 | pH5 | wait, I maybe misunderstood. you mean if you have to do ifconfig bnep0 up? |
10:30.42 | NickBee | how do i do thatyes |
10:30.44 | NickBee | yes |
10:30.58 | pH5 | yes, you have to do that, unless the pand already does it for you, I'm not sure here. |
10:31.12 | pH5 | ifconfig bnep0 192.168.0.2 up |
10:31.14 | pH5 | for example |
10:31.16 | ketrox | it's already up |
10:31.22 | ketrox | since he can ping it |
10:31.25 | pH5 | or ifconfig bnep0 up && udhcpc bnep0 |
10:31.25 | NickBee | i can ping |
10:31.29 | pH5 | ah right |
10:31.33 | pH5 | so it's just the default route? |
10:31.34 | NickBee | so i assume its already up |
10:31.36 | pH5 | yes |
10:32.21 | NickBee | the route says "default * 255.255.255.0 UG 0 0 0 bnep0 |
10:32.36 | NickBee | use is set to 0 |
10:33.41 | NickBee | sry, the first column does not reads "default", it is 192.168.0.0 |
10:35.02 | NickBee | oh i think i figured it out |
10:35.20 | NickBee | how can i get the ip address of my windows mobile ? |
10:35.35 | ketrox | you said you could ping it ? |
10:35.57 | NickBee | no, i said i can ping from windows mobile to linux |
10:36.47 | pH5 | ip route del default && ip route add default via 192.168.0.1 dev bnep0 |
10:37.15 | NickBee | Ok |
10:37.21 | NickBee | trying ... |
10:37.37 | NickBee | and yes, i think i mistyped about ping route earlier :) |
10:38.42 | pH5 | NickBee: if the mobile has a dhcp server, you could try udhcpc |
10:38.50 | pH5 | to set up ip and route automatically |
10:39.04 | NickBee | it has dhcp |
10:39.14 | NickBee | as it assigns ip to my notebook |
10:39.25 | NickBee | how can i use udhcpc ? |
10:39.46 | pH5 | not sure. "udhcpc bnep0"? |
10:40.28 | pH5 | if you add bnep0 to /etc/network/interfaces like usb0, it might do that automatically. |
10:42.56 | NickBee | ok |
10:44.10 | NickBee | hey, ph5 it works !!!! |
10:44.26 | NickBee | "ip route add default via 192.168.0.1 dev bnep0" did the trick |
10:46.25 | NickBee | i will need to see the udhcpc option to make it automatic |
10:47.03 | pH5 | NickBee: good. look at /etc/network/interfaces. maybe "iface bnep0 dhcp" and "allow-hotplug bnep0" do the trick. |
10:47.14 | NickBee | cool |
10:47.36 | NickBee | as mac dee people say "i'm lovin it" |
10:53.03 | *** join/#htc-linux dcordes (n=tsingtao@f049170221.adsl.alicedsl.de) |
10:54.35 | NickBee | its still not able to resolve host names |
10:54.51 | NickBee | ipkg update threw a whole lot of errors on my face |
10:55.47 | NickBee | what shall i do to make it resolve hostnames? |
10:56.26 | pH5 | edit /etc/resolv.conf |
10:56.39 | *** join/#htc-linux BiBite (n=BiBlte@gob75-6-82-236-225-173.fbx.proxad.net) |
10:56.49 | NickBee | and ? |
10:57.00 | pH5 | add a line "nameserver <ip>" |
10:57.18 | pH5 | udhcpc should do that automatically if the /etc/network/interfaces setup works |
10:57.57 | NickBee | ok, let me try it then |
11:01.52 | *** join/#htc-linux rob_w (n=bob@M9ff5.m.pppool.de) |
11:03.42 | NickBee | done the changes to interface file |
11:07.08 | NickBee | it didn't brought the network up itself |
11:07.19 | NickBee | do i need to reboot for the interfaces file to take effect / |
11:08.02 | BiBite | Hi all |
11:08.57 | BiBite | I'm having problems with haret on trinity |
11:09.26 | BiBite | the variabler CMDLINE seems to not be passed to the kernel at all |
11:10.53 | BiBite | is this a know problem ? |
12:34.49 | *** join/#htc-linux cras1 (n=crash@84.78.99.40) |
12:35.09 | *** join/#htc-linux mzb_d800 (n=mzb@ppp108-88.static.internode.on.net) |
12:37.21 | cras1 | hello everybody, anyone has configure htc-universal with gprs conection? i have read that the phone part doesn't work yet |
12:38.18 | cras1 | anyone develops here? may be i can help developing |
12:42.20 | pH5 | hi cras1, we have several universal owners in this channel, but I think none of them is active right now. |
12:43.00 | cras1 | thanks |
12:44.02 | cras1 | is there any proyect of the universal were i can try to improve the code? |
12:45.18 | cras1 | Do you know which linux version install the universal users? i have been looking for familiar, angstrom and debian embedded |
12:45.38 | cras1 | i would like to work with gpe, i prefer gnome than kde |
12:46.04 | cras1 | should i try Familiar? |
12:46.14 | pH5 | cras1: I'd suggest angstrom. universal kernel development is done in handhelds.org cvs kernels. for userspace development, look at openembedded |
12:47.23 | cras1 | thank you very much |
12:47.25 | pH5 | for angstrom images, look at http://www.linuxtogo.org/~htcpxa/htcuniversal/ |
12:47.30 | pH5 | goxboxlive makes those images |
12:47.35 | pH5 | (mostly) |
12:48.35 | pH5 | or http://www.angstrom-distribution.org/unstable/images/htcuniversal |
12:49.13 | cras1 | i'm going to enjoy a bit with angstrom |
12:49.46 | pH5 | cool. |
12:50.03 | cras1 | in the last link that you send me, which image i have to try |
12:50.16 | cras1 | x11 ?? |
12:50.27 | cras1 | i mean to use gpe |
12:51.12 | pH5 | angstrom-x11-image is basically a very bare gpe image (without many apps installed) |
12:52.00 | cras1 | ok, thanks for all |
12:52.30 | pH5 | cras1: you're welcome |
13:45.07 | NickBee | guys need a small help with hx4700 |
13:45.27 | NickBee | i have setup a bluetooth PAN with a windows 6 ppc and hx4700 |
13:45.51 | NickBee | i am able to ping from hx4700 running linux (qtopia) to internet ip address |
13:46.03 | *** join/#htc-linux scatterp- (n=zsirc@196.40.38.117) |
13:46.07 | NickBee | but the machine is not able to resolve host names |
13:46.34 | NickBee | output of "ping google.com" (after a considerable wait) is: hostname not resolved |
13:46.42 | NickBee | any ideas? |
13:46.50 | NickBee | seems like a dns issue |
13:47.01 | NickBee | but don't know where/how to look |
14:12.07 | *** join/#htc-linux dcordes_ (n=tsingtao@e179110152.adsl.alicedsl.de) |
14:57.27 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
15:11.59 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
15:13.25 | cras1 | anybody has try gpe in a htc universal? |
15:14.12 | cras1 | i have try it and seems that everything works except the touch screen |
15:14.27 | cras1 | if anybody could help me... |
15:33.37 | BabelO | hi |
15:34.04 | BabelO | cras1: try ts_test, to test it, just shutdown gpe with /etc/init.d/gpe-dm stop |
15:34.39 | cras1 | thank BabelO |
15:36.56 | cras1 | i am trying to do it from the terminal, but it says there is no such process |
15:37.11 | cras1 | as root of course |
15:37.29 | BabelO | ok, try just ts_test maybe it works even if gpe is running |
15:37.41 | cras1 | ok |
15:38.28 | cras1 | ts_test is running but touchscreen doesn't work |
15:38.39 | BabelO | ok |
15:38.47 | BabelO | what detect-stylus say ? |
15:39.18 | cras1 | how can i exit the ts_test program with the keyboard? |
15:39.29 | BabelO | killall -9 ts_test ;) |
15:39.44 | BabelO | or jsut CTRL+C |
15:40.27 | cras1 | i don't have CTRL |
15:41.04 | cras1 | I'm going to restart the device |
15:42.25 | cras1 | i have the spanish keyboard |
15:42.43 | BabelO | login again over ssh |
15:42.44 | cras1 | in the english version is a Control key? |
15:43.24 | cras1 | and how i connect it? with USB? |
15:43.30 | BabelO | don't know universal keyboard :) |
15:43.37 | BabelO | yes with usb |
15:43.55 | BabelO | just connect your usb to linux machine if you have one |
15:44.33 | cras1 | yes, i am linux user, don't worry |
15:44.40 | cras1 | is connected by USB |
15:44.44 | cras1 | right now |
15:44.59 | BabelO | ok do a ifconfig usb0 192.168.0.202 |
15:45.26 | BabelO | or anything different from 205 or 206, i m not sure of universal ip adress |
15:46.55 | cras1 | is anyway to know the ip adress of the device? |
15:47.20 | BabelO | yes, unpack the image on your computer, adn check in /etc/network |
15:47.23 | BabelO | i check here |
15:48.10 | BabelO | yes it is in /etc/network/interfaces file |
15:48.17 | BabelO | iface usb0 |
15:49.17 | cras1 | i have the image in the other computer, 1 minute |
15:58.23 | cras1 | i have been lookin and is the one you say |
15:58.44 | cras1 | do i have to configure something in the device to connect from ssh |
15:59.08 | BabelO | the device is automatically configured when you plug usb cable |
15:59.21 | BabelO | just configure your host on same network with ifconfig |
15:59.53 | cras1 | it asks me the password but i enter the one for my device's user and doesn't work |
16:00.13 | BabelO | there is no password |
16:00.26 | BabelO | or rootme |
16:00.29 | cras1 | i have tried already |
16:00.59 | BabelO | hmm your are logged as a user on you computer ? |
16:01.29 | cras1 | i am trying to do it as root right now, but seems doesn't work too |
16:01.53 | BabelO | ok what ip adress did you configure for computer ? |
16:02.15 | cras1 | 192.168.0.3 |
16:02.34 | BabelO | and you ssh root@192.168.0.202 ? |
16:02.41 | cras1 | yes |
16:02.56 | cras1 | i tried with the password in blank and with rootme |
16:04.18 | BabelO | are you sure you are not loggin to your one computer ? ;) try your password |
16:05.11 | cras1 | i have try with my computer password and it connect to my PC's SSH server |
16:05.23 | BabelO | ok |
16:05.40 | BabelO | so you have done ifconfig usb0 192.168.0.202 on your host computer |
16:06.02 | cras1 | yes |
16:06.04 | BabelO | just do ifconfig usb0 192.168.0.201 on your computer |
16:06.21 | BabelO | then route add 192.168.0.202 gw 192.168.0.201 |
16:06.38 | BabelO | because your home network is on same subnet |
16:09.39 | cras1 | and now i have to type shh 192.168.0.201?? |
16:09.47 | BabelO | no ssh to 192.168.0.202 |
16:09.52 | cras1 | ok |
16:10.32 | cras1 | it says no route to host |
16:10.50 | BabelO | ping 192.168.0.202 does not work then |
16:11.09 | BabelO | are you sure ip adress writen in interfaces file is 192.168.0.202 ? |
16:11.45 | *** join/#htc-linux NickBee (n=NickBee@122.162.81.100) |
16:12.15 | cras1 | in the /etc/network/inteface's of the device it says in the line of iface usb0 inet static adress 192.168.0.202 |
16:12.34 | BabelO | ok good |
16:12.57 | cras1 | when i make a ping it says destination host ureachable |
16:13.26 | BabelO | route -n ? |
16:13.52 | cras1 | 192.168.0.202 192.168.0.201 255.255.255.255 UGH 0 0 0 usb0 |
16:13.53 | cras1 | 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 |
16:13.53 | cras1 | 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0 |
16:13.53 | cras1 | 172.16.15.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 |
16:13.53 | cras1 | 172.16.155.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 |
16:13.53 | cras1 | 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 |
16:13.55 | cras1 | 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 |
16:14.34 | BabelO | ok, it should work |
16:15.10 | cras1 | but it doesn't work :) |
16:17.12 | BabelO | is there a gateway in interfaces file |
16:17.37 | cras1 | yes, 192.168.0.200 |
16:18.01 | cras1 | i have try typing ssh 192.168.0.200 |
16:18.15 | cras1 | but didn't work |
16:18.35 | cras1 | do i have to do ifconfig? |
16:19.05 | cras1 | i mean ifconfig usb0 192.168.0.200 |
16:20.15 | BabelO | yes you can try ifconfig usb0 192.168.0.200 and route add 192.168.0.202 gw 192.168.0.200 |
16:25.27 | cras1 | @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
16:25.27 | cras1 | @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ |
16:25.27 | cras1 | @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
16:25.27 | cras1 | IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! |
16:25.27 | cras1 | Someone could be eavesdropping on you right now (man-in-the-middle attack)! |
16:25.28 | cras1 | It is also possible that the RSA host key has just been changed. |
16:25.30 | cras1 | The fingerprint for the RSA key sent by the remote host is |
16:25.32 | cras1 | e4:27:71:83:50:76:29:ae:a9:5d:0d:19:24:03:02:82. |
16:25.34 | cras1 | Please contact your system administrator. |
16:25.36 | cras1 | Add correct host key in /home/crash/.ssh/known_hosts to get rid of this message. |
16:25.38 | cras1 | Offending key in /home/crash/.ssh/known_hosts:2 |
16:25.40 | cras1 | RSA host key for 192.168.0.202 has changed and you have requested strict checking. |
16:25.42 | cras1 | Host key verification failed. |
16:26.32 | BabelO | cras1: yees it is normal, because you already logged in to another host for same adress |
16:26.53 | BabelO | remove file in /root/.ssh/know_host |
16:27.06 | cras1 | in my device or in my pc? |
16:27.26 | BabelO | pc |
16:27.48 | BabelO | or in the home your are logged in |
16:28.01 | cras1 | when i try to make a ping doesn't reach destination host |
16:30.40 | cras1 | thanks for the help |
16:31.07 | cras1 | i'm going to investigate a bit |
16:52.14 | cras1 | Babel0: I don't have detect-stylus in my device |
17:18.07 | Kevin2 | Hi |
17:18.53 | BabelO | hi Kevin2 |
17:19.15 | Kevin2 | Hi BabelO |
17:34.02 | *** join/#htc-linux SmallR2003 (n=SmallR20@79-74-87-69.dynamic.dsl.as9105.com) |
17:44.16 | *** join/#htc-linux the_sys0p (n=the_sys0@cpe-66-75-196-173.bak.res.rr.com) |
17:53.42 | cras1 | anybody knows how to configure touch screen in a htc universal? it doesn't work with gpe |
17:54.11 | BabelO | cras1: wait for goxboxlive |
17:54.47 | cras1 | ?? |
17:55.06 | cras1 | who is goxboxlive |
17:55.13 | cras1 | ? |
17:55.22 | cras1 | or whar? |
17:55.22 | BabelO | goxboxlive is the one who have made universal image |
17:56.59 | cras1 | if there isn't any way i will wait |
17:58.24 | cras1 | but i think that the touch screen have to be working, i have read that it works |
17:58.48 | cras1 | my device is the vodafone v1640 |
17:59.03 | cras1 | could be that? |
18:00.38 | BabelO | maybe not the same board |
18:08.13 | cras1 | Babel0 i have the solution |
18:08.36 | cras1 | when you start the gpe appear the screen calibration, but doesn't work |
18:09.15 | cras1 | i have gone after to the screen setup and in calibration it works, a bit strange, but finally i can enjoy a lot |
18:10.13 | cras1 | thanks a lot for your help, i am very happy to have linux at mi pocket pc |
18:30.19 | *** join/#htc-linux goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
18:36.57 | *** join/#htc-linux Foxdie` (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) |
18:44.44 | *** join/#htc-linux pH5 (n=ph5@p5485D19C.dip.t-dialin.net) |
18:47.57 | *** join/#htc-linux silven (n=zmc@cvx-ppp-66-50-147-194.coqui.net) |
19:06.51 | *** join/#htc-linux dcordes (n=tsingtao@f048002002.adsl.alicedsl.de) |
19:09.12 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
19:15.13 | *** join/#htc-linux SmallR2003 (n=SmallR20@79-74-59-227.dynamic.dsl.as9105.com) |
19:25.47 | *** join/#htc-linux goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
20:01.55 | *** join/#htc-linux SmallR2004 (n=SmallR20@79-74-98-160.dynamic.dsl.as9105.com) |
20:18.40 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
20:58.20 | *** join/#htc-linux gmax (n=giorgio@adsl-ull-157-81.47-151.net24.it) |
21:02.53 | *** part/#htc-linux cras1 (n=crash@84.78.99.40) |
21:02.55 | *** join/#htc-linux cras1 (n=crash@84.78.99.40) |
21:05.10 | *** join/#htc-linux NickBee (n=NickBee@122.162.81.217) |
21:16.17 | gmax | hi! i have read that is possible to run openmoko on magician... i have successfully started our image for universal patched with magician modules from angstrom, but i have some problems |
21:17.58 | gmax | the stylus has y coordinate "inverted"... icons oversized, text undersized... |
21:18.50 | pH5 | hi gmax, there are images at http://www.angstrom-distribution.org/unstable/images/magician/ |
21:18.56 | pH5 | for stylus delete /etc/pointercal |
21:19.11 | pH5 | the rest is probably wrong dpi settings and maybe wrong font size settings for qvga |
21:21.56 | gmax | i make some test... thank you |
21:24.20 | pH5 | np |
21:29.16 | *** join/#htc-linux goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
21:43.59 | *** join/#htc-linux gmax (n=giorgio@adsl-ull-50-87.47-151.net24.it) |
22:03.06 | cras1 | anybody has try wifi in the universal? |
22:05.21 | Foxdie | in linux? |
22:05.25 | Foxdie | it works poorly |
22:05.29 | Foxdie | needs new driver |
22:07.54 | cras1 | it doesn't work for me |
22:08.47 | Foxdie | you have to activate it manually in the console with modprobe |
22:08.56 | Foxdie | oh and the tool you set the wifi with is bugged, you have to manually edit the file :/ |
22:09.10 | Foxdie | and if you're using WEP the key needs to be in hex, not as a passphrase |
22:09.41 | cras1 | thanks |
22:10.46 | cras1 | i'm going to try |
22:13.47 | cras1 | in which file I have to edit? |
22:13.55 | cras1 | /etc/networks?? |
22:36.36 | cras1 | Foxdie, how i use modprobe to activate the wifi |
22:36.47 | cras1 | ? |
22:39.52 | Foxdie | I forget |
22:40.00 | Foxdie | if you search XDA forums though I made a post there a few months ago |
22:41.11 | cras1 | thaks |
23:00.55 | goxboxlive | cras1: 'modprope acx' then 'ifup wlan0' and you should be on if u have a AP without any wep key. Add wep key to /etc/network/interfaces if your Ap is setup with WEP. WPA is not supported |
23:21.05 | cras1 | thanks goxboxlive |
23:21.17 | cras1 | i'm going to try |
23:27.18 | cras1 | goxboxlive, now it appears a new HWaddr in System information --> Networks |
23:27.33 | cras1 | but the wifi disconnects in a few seconds |
23:27.49 | cras1 | now i have wlan0 |
23:37.56 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
23:47.26 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |