00:00.03 | tsdogs | neither the lib |
00:00.30 | tsdogs | maybe it strips it down when putting it in the image dir, let's see |
00:00.37 | cr2 | well, you can compile a debug version. in principle. |
00:01.17 | tsdogs | yes but configure did report debug no |
00:01.35 | tsdogs | so I think that if I reconfig then I have to build it again... |
00:04.00 | tsdogs | well the original one is not stripped... |
00:05.55 | cr2 | ok, it's late now. good night. |
00:06.04 | tsdogs | yeah good night. |
00:08.23 | tsdogs | maybe I found it, I'm missing the libliquid.so |
00:14.53 | tsdogs | nope |
00:15.45 | tsdogs | :( well it's been a long day. night everybody. |
00:21.54 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
00:31.15 | *** join/#htc-linux hugo_nz (n=hugo@132.181.52.15) |
00:33.35 | Kevin2 | cr2 / goxboxlive - I don't think "resumeintoboot" works correctly. Looks like the bootloader does something with the mmu and haret isn't coping.. |
01:04.00 | *** join/#htc-linux hugo_nz (n=hugo@132.181.52.15) |
04:53.47 | *** join/#htc-linux sadeness_ (n=LamersIn@nat1.rlan.ru) |
05:14.58 | *** join/#htc-linux _law_ (n=law@mail.stiftadmont.at) |
05:15.00 | *** join/#htc-linux RoEn_PC (n=roen@p54A66F82.dip.t-dialin.net) |
05:18.08 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
06:34.56 | *** join/#htc-linux sadeness_ (n=LamersIn@nat2.rlan.ru) |
07:46.29 | *** join/#htc-linux BabelO (n=Miranda@faim1.itesoft.com) |
08:39.27 | *** join/#htc-linux pH5 (n=ph5@e178202105.adsl.alicedsl.de) |
08:55.52 | BabelO | Hi pH5 |
08:56.35 | pH5 | good morning |
08:59.28 | BabelO | i ll look in BA code yesturday to understand why i heard nothing on right channel, but it is same as magician code |
09:05.00 | pH5 | BabelO: it should be. do you use earphones or the main speaker? |
09:05.24 | pH5 | if there is no mute on the right channel and it's not a wiring issue... |
09:05.31 | pH5 | I don't know what else would cause this. |
09:06.47 | BabelO | pH5 : i use earphones, if i use balance settings i can control right and left volume |
09:07.32 | BabelO | but when using speakertest from alsa-utils, i heard only noise when left channel is activated |
09:45.32 | *** join/#htc-linux Fossi (n=cmewes@195.177.48.115) |
09:54.06 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
09:54.16 | goxboxlive | good morning htc-linux |
09:54.32 | *** join/#htc-linux pleemans (n=peter@d5152D19B.access.telenet.be) |
09:55.19 | pH5 | hi goxboxlive |
09:55.32 | goxboxlive | hi, any news about gsmd? |
09:56.05 | goxboxlive | I havent tried the latest changes. I have tested babelO's gnokii a little though |
09:59.14 | pH5 | goxboxlive: not that I know of. |
10:00.46 | goxboxlive | Ok, i'll test it one day and see if your patches still works. |
10:04.48 | *** join/#htc-linux leOn (n=xxx@gw-staff-ci.fct.unl.pt) |
10:36.35 | *** join/#htc-linux twostupiddogs (n=twostupi@84.18.144.39) |
11:28.44 | *** join/#htc-linux TripleDE1 (n=sergio@204.pool85-50-241.dynamic.orange.es) |
11:56.31 | goxboxlive | tsdogs: Did you manage to start Opie2 yesterday? |
11:58.00 | BabelO | hi goxboxlive |
12:01.20 | tsdogs | nope, I rebuilded it from scratch. |
12:01.29 | tsdogs | without any errors... :) |
12:01.41 | tsdogs | BabelO: you saw the mail? |
12:01.51 | tsdogs | copying now on SD... |
12:02.34 | BabelO | tsdogs : yes, but i m at work... i try this evening |
12:02.55 | BabelO | and thanks for the tips to having vnc server on my qtopia image ;) |
12:03.37 | tsdogs | :) |
12:04.28 | tsdogs | -extra-qtopiacore-config "-plugin-gfx-vnc" |
12:04.33 | tsdogs | in configure if you need it |
12:04.43 | tsdogs | rebuilds all though |
12:05.16 | tsdogs | I think I'd really should setup a NFS env here... Copying to SD is slow... |
12:07.58 | BabelO | tsdogs : thx |
12:33.42 | tsdogs | *** glibc detected *** /opt/Qtopia/bin/qpe: free(): invalid pointer: 0x40a10a58 *** |
12:33.42 | tsdogs | Aborted |
12:37.21 | BabelO | tsdogs :so now opie doesn't hand, but show nothing ? |
12:37.35 | BabelO | s/hand/hang/ |
12:38.03 | tsdogs | no. it quitted ... |
12:38.09 | tsdogs | there no gnokii here . |
12:38.31 | tsdogs | goxboxlive: does your opie without gnokii start? |
12:38.53 | tsdogs | VNC connection opened ... |
12:39.03 | tsdogs | black screen ... |
12:39.40 | tsdogs | still it messes up keyboard on HTC |
12:41.10 | tsdogs | [New LWP 1330] |
12:41.10 | tsdogs | [LWP 1330 exited] |
12:41.17 | tsdogs | clicking on screen. |
12:45.59 | tsdogs | UI : Loading background image: "" |
12:46.03 | tsdogs | UI : Background image resized: -1 x -1 |
12:46.07 | tsdogs | UI : Background image disply mode: Center |
12:46.11 | tsdogs | QtopiaServer : Server widget mapping (based on default): "BrowserScreen" -> "Phone" |
12:46.11 | tsdogs | UI : PhoneMainMenu: |
12:46.11 | tsdogs | UI : 4 x 3 |
12:46.12 | tsdogs | UI : Mapping keys: "123456789*0#" |
12:46.12 | tsdogs | UI : Key "1" : "Applications/datebook.desktop" |
12:46.12 | tsdogs | then it hangs for a while... |
12:46.48 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.250) |
13:03.12 | goxboxlive | tsdogs: No, my opie2 image will not launch even wiythopu gnokii |
13:03.34 | goxboxlive | without |
13:03.38 | goxboxlive | hi babelO |
13:04.00 | tsdogs | ok then I got the same as you. I thought it was my problem |
13:04.25 | tsdogs | does your version take very long to initialize the UI: Key etc stuff |
13:04.31 | tsdogs | mine takes forever... |
13:05.24 | goxboxlive | Yes, it flashes with whiote screen once, and the it takes a break :-) and the it flashes about 3-4 times and then seg fault. |
13:05.48 | BabelO | tsdogs: where did you set your screen size ? |
13:05.52 | goxboxlive | remember to add sleep 20 script to gnokii |
13:06.32 | goxboxlive | BabelO Actually that is not needed, Qtiopia should figure it out by it self |
13:06.44 | tsdogs | in the opie start script... |
13:07.02 | tsdogs | But doesn't change if I remove it... |
13:07.35 | goxboxlive | You dont even need it in the configure.conf file |
13:08.48 | goxboxlive | BabelO: This must have something to do with updates in Qtopia source, because we are using the same htcphone as we did with 4.2.0. |
13:09.28 | BabelO | goxboxlive : you can try qtopia 4.2.2 instead of opie2 |
13:09.35 | goxboxlive | The only diffrents for me is gnokii. but i have also tried to build it without gnokii |
13:10.07 | tsdogs | I think it is some configuration file... |
13:10.14 | goxboxlive | But is everything included like in opie2? Application and so? |
13:10.28 | tsdogs | no, only the core |
13:11.31 | goxboxlive | so what will it launch when i start qpe? |
13:11.47 | tsdogs | bableo, can't you simply tar.bz2 your opie2 rootfs? |
13:18.11 | BabelO | tsdogs : yes i can, but only this evening :( |
13:23.35 | *** join/#htc-linux cyrill62 (n=cyrill62@205.245.146.195.dynamic.adsl.abo.nordnet.fr) |
13:24.28 | tsdogs | sure no prob. |
14:04.21 | tsdogs | Ok, opie without plugings starts, but no display (not even VNC) |
14:10.57 | *** join/#htc-linux leOn (n=xxx@gw-staff-ci.fct.unl.pt) |
14:52.59 | *** join/#htc-linux _law_ (n=_law_@213.173.86.202) |
15:29.57 | tsdogs | even with plugins it starts... but still no display |
15:44.14 | psokolovsky__ | tsdogs: OPIE in OE.dev works. stop wasting your time, join community. http://linuxtogo.org/gowiki/OpieWithAngstrom |
15:47.08 | tsdogs | actually it's opie2 |
15:47.09 | tsdogs | opie works for me thx |
16:00.22 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
16:05.50 | goxboxlive | psokolovsky__ Has there been any updates to qte-mt-2.3.10 lately? It failes in OE. I have just started a new fresh build and followed your guide to create a opie image for angstrom and it is failing. |
16:07.14 | psokolovsky__ | goxboxlive: no such word "failing", exists such word bug #xxxx |
16:07.49 | goxboxlive | pastebin.co.uk/13939 |
16:08.18 | goxboxlive | Well if i place a bug at OE it will be aplied in december or so. |
16:09.18 | goxboxlive | hmmit skipped the bug |
16:09.30 | goxboxlive | to long message, i pastebin the failure |
16:10.16 | goxboxlive | pastebin.co.uk/13940 |
16:15.01 | psokolovsky__ | goxboxlive: if you don't submit bug, you'll wait while someone else will do, then add up current span to decemeber ;-) |
16:15.19 | psokolovsky__ | goxboxlive: either way, known issue, patch submitted, needs testing and then commit |
16:15.26 | goxboxlive | ok |
16:15.37 | goxboxlive | i'll test it |
16:15.45 | psokolovsky__ | goxboxlive: http://bugs.openembedded.org/show_bug.cgi?id=2201 |
16:15.52 | goxboxlive | gracias |
16:33.15 | goxboxlive | ljp: Are you here? |
16:34.58 | *** join/#htc-linux RoEn_PC (n=roen@p54A66F82.dip.t-dialin.net) |
17:17.55 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
17:22.31 | *** join/#htc-linux scorpio16v (n=scorpio1@ACB34F4F.ipt.aol.com) |
17:29.04 | goxboxlive | cr2: I can confirm, mem=64 it's not needed anymore |
17:33.55 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
17:34.57 | BabelO | hi |
17:46.23 | BabelO | tsdogs: are you here ? |
17:50.55 | tsdogs | yes. |
17:51.04 | tsdogs | no success so far. |
17:51.18 | BabelO | how do you bypass gfxvnc password ? |
17:51.25 | tsdogs | it seems some sort of screen issue... |
17:51.29 | BabelO | my screen is black and can't conect |
17:51.38 | tsdogs | vnc you mean? |
17:51.43 | BabelO | yes |
17:51.57 | tsdogs | ho. I can connect, but it's black |
17:52.20 | tsdogs | so there is something with the video driver then. |
17:52.28 | BabelO | i can't connect, because of auth or password ?! |
17:52.49 | tsdogs | It does not ask for password to me. |
17:53.07 | tsdogs | you tryed to telnet to port 5900 |
17:53.51 | tsdogs | whar svn revision of opie2 are you using? |
17:54.22 | BabelO | latest, like you no more modification |
17:54.28 | tsdogs | 53? |
17:54.35 | tsdogs | s/53/52/ |
17:54.38 | BabelO | yes |
17:54.50 | BabelO | do you try some other fb driver ? |
17:55.16 | tsdogs | well I tryed native fb and Transformed. |
17:55.27 | tsdogs | screen keeps flashing... |
17:55.40 | tsdogs | it seems it is working, but not the screen. |
17:55.57 | tsdogs | I removed the defaultbuttons, so to make boot faster. |
17:56.22 | tsdogs | It took something like 3mins to init buttons :/ |
17:57.46 | BabelO | ok |
18:00.31 | goxboxlive | hi all |
18:00.41 | tsdogs | hi |
18:01.03 | goxboxlive | I am trying to build 4.2.2 now, so far no breaks. |
18:01.36 | tsdogs | bluetooth? |
18:01.50 | goxboxlive | No, bluetooth fails when configureing |
18:01.57 | tsdogs | well, I guess it's not trivial |
18:02.03 | goxboxlive | It detects dbus, but BT failes. DOnt know what i miss |
18:02.31 | goxboxlive | I have added bluetooth to it'sconfigure file, but it doesnt help |
18:02.39 | tsdogs | You'd need to put libs and headers into local/arm I suppose. |
18:02.47 | tsdogs | like we did with ts |
18:03.04 | goxboxlive | But we didnt do that with BT on the Opie version |
18:03.53 | tsdogs | 'cause it's in the 3rdparty, that's what makes different opieII from qtopia. |
18:04.14 | goxboxlive | It builds all the games, appliactions and so . So i diont understand whats the diffrent. ALl that i can see is that it has only sdk and GP as devices |
18:04.24 | goxboxlive | ahhh :-) |
18:05.00 | goxboxlive | so i need to have libbluettoth-1.so in my path |
18:05.21 | tsdogs | Yes, but I think that OE uses libbluetooth-2 |
18:05.31 | goxboxlive | ok |
18:05.33 | tsdogs | and headers too |
18:05.40 | goxboxlive | rihgt |
18:05.44 | tsdogs | but I'd give it a try like this. |
18:07.33 | goxboxlive | tsdogs:Have you also tried out the core version? |
18:07.56 | tsdogs | nope. |
18:08.00 | goxboxlive | BabelO: packagemanager builds in the core version. |
18:08.30 | tsdogs | I copied it over the opieII and did solve the issues in opie2 |
18:08.51 | tsdogs | though it broke svn :( |
18:08.55 | goxboxlive | :-) thats how i am doing also sometimes, ugly but it works |
18:09.04 | tsdogs | :D |
18:10.56 | goxboxlive | tsdogs: Beacuse of my bugs in OE i started a new fresh one overnight, but it failes building qte-mt |
18:11.30 | tsdogs | the patch psokovolsky sent you is working for me. |
18:12.02 | tsdogs | I think there might be an issue with that in opieII too. ChacheManager does not find PAGE_SIZE... |
18:12.08 | goxboxlive | but where did you add it? I added it to the bb file, but it failes configure |
18:12.36 | tsdogs | you have to go to org.openembedded.org |
18:12.49 | goxboxlive | I bet qtoie-core will work on universal. The opie2 has been buggy since peolple started to add files to it |
18:12.51 | tsdogs | then issue patch -p0 < patchfile |
18:13.22 | goxboxlive | ahhh, i c :-) I thought it where a patch for the file |
18:13.37 | tsdogs | Just to have I try I builded qtopia-core in OE (4.2.0) no issues there, but didn't test it on device yet |
18:13.55 | tsdogs | no it's a patch for adding a patch :) |
18:14.29 | tsdogs | be carefull though, this will brake your OE update, till they put it in there. |
18:14.54 | tsdogs | complaining about file missing in OE |
18:16.39 | goxboxlive | ok, but i can just build qte-mt and the revert again |
18:17.23 | tsdogs | do that |
18:17.35 | goxboxlive | why am i getting this? |
18:17.37 | goxboxlive | jrs@linuxserver:~/cvs/oe/org.openembedded.dev$ patch -p0 < patch-qte |
18:17.37 | goxboxlive | patching file packages/qte/qte-2.3.10/kernel-asm-page.patch |
18:17.37 | goxboxlive | patching file packages/qte/qte-common_2.3.10.inc |
18:17.37 | goxboxlive | Reversed (or previously applied) patch detected! Assume -R? [n] |
18:17.38 | goxboxlive | Apply anyway? [n] |
18:17.40 | goxboxlive | Skipping patch. |
18:17.42 | goxboxlive | 1 out of 1 hunk ignored -- saving rejects to file packages/qte/qte-common_2.3.10.inc.rej |
18:18.08 | goxboxlive | I had just deleted the inc file |
18:18.48 | tsdogs | I think you already applyed this. |
18:18.59 | tsdogs | did you add the file to the bb? |
18:19.04 | tsdogs | by hand? |
18:20.20 | goxboxlive | yes |
18:20.26 | goxboxlive | ahh of course then |
18:20.56 | BabelO | tsdogs: did you check fb0 device is ok ? |
18:21.09 | tsdogs | it is there... |
18:21.15 | BabelO | sys/class/graphic/* |
18:21.17 | tsdogs | OE splash starts |
18:21.25 | BabelO | yes right |
18:21.38 | tsdogs | yes anyway |
18:21.41 | BabelO | i ve two under this |
18:21.56 | tsdogs | I'm trying the qvfb driver, but it says it does not know it |
18:22.02 | tsdogs | fbcon and fb0 |
18:22.11 | tsdogs | should I try with fbcon ? |
18:22.24 | BabelO | don't know |
18:23.51 | tsdogs | QVfb driver not found... |
18:23.51 | tsdogs | Well I just builded the lib and not everything ... |
18:24.49 | tsdogs | no /dev/fbcon |
18:25.01 | tsdogs | I have to go home now, BBL |
18:25.12 | tsdogs | BabelO: could you make that rootfs image? |
18:25.59 | tsdogs | Opie keeps sayng: Trigger todo |
18:25.59 | goxboxlive | qtopiacore builded |
18:26.01 | goxboxlive | have to try it out |
18:26.14 | tsdogs | great, looking forward to see if it works. |
18:26.44 | tsdogs | BBL |
18:28.10 | *** join/#htc-linux piggz (n=piggz@89.241.171.3) |
18:28.59 | piggz | lo...i have a htc monet smartphone (wm5) what are the changes of my running linux on it? (i can get the rgb rom screen up using the camera+power button) |
18:31.01 | goxboxlive | BabelO could you pastebin your startup script ? SO i do it exactly the same as you |
18:44.41 | BabelO | goxboxlive: http://pastebin.ca/469386 |
18:44.51 | goxboxlive | takk |
18:44.58 | goxboxlive | =merci |
18:45.08 | BabelO | de rien |
18:46.53 | BabelO | goxboxlive: picture of my screen http://img510.imageshack.us/img510/8277/capture3jv6.png |
18:47.33 | goxboxlive | good |
18:47.59 | goxboxlive | it flashes |
18:48.22 | goxboxlive | and hangs |
18:50.26 | goxboxlive | No, it's seems like it is exactly the same as Opie2 |
18:55.09 | goxboxlive | Cannot get semaphore /tmp/qtopia-0/sharedCa |
18:56.37 | BabelO | i m looking at error |
19:03.21 | goxboxlive | BabelO is libstdc++6 the only file you install as extra? |
19:04.04 | goxboxlive | <PROTECTED> |
19:04.17 | goxboxlive | 'http://pastebin.no/1491 |
19:05.05 | BabelO | goxboxlive: i start opie2 from an standard opie image, i remove only directory opie |
19:05.16 | goxboxlive | ok |
19:05.34 | goxboxlive | i use a console image, i thats what i was also using with 4.2.0 |
19:06.10 | BabelO | ok, i have to compress my opie2 image directory ;) for tsdogs and you |
19:09.22 | BabelO | goxboxlive: at root of my ftp server -> Opie2-Binary.tar.bz2 |
19:10.08 | goxboxlive | good, i'll try it out |
19:13.45 | *** part/#htc-linux scorpio16v (n=scorpio1@ACB34F4F.ipt.aol.com) |
19:16.43 | *** part/#htc-linux _law_ (n=_law_@213.173.86.202) |
19:17.11 | *** join/#htc-linux law|ibook (n=_law_@213.173.86.202) |
19:19.08 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.98.2) |
19:24.28 | *** join/#htc-linux twostupiddogs (n=twostupi@62.123.180.130) |
19:26.26 | goxboxlive | BabelO: Actually, it worked better, but not good |
19:26.55 | BabelO | goxboxlive: it works ? |
19:27.04 | goxboxlive | It flashes ones, then it starts up, so i can actuall see the qtopia screen for about 5 sec, then it seg fault |
19:27.26 | BabelO | goxboxlive: because there is gnokii on |
19:27.32 | goxboxlive | But i think that that has something to do with gnokii |
19:27.42 | goxboxlive | I have gnokii installed |
19:27.45 | BabelO | can you check etc/Task.cfg ? |
19:29.33 | goxboxlive | yes hold on i had to reboot. It screwes up my keyboard after tryinng to launch qpe |
19:30.56 | goxboxlive | after trying to launch or before? |
19:31.04 | BabelO | before |
19:31.12 | BabelO | i show you mine |
19:31.42 | BabelO | [startup] |
19:31.42 | BabelO | +ApplicationLauncher |
19:31.43 | BabelO | phoneServer |
19:31.43 | BabelO | QtopiaNetworkServer |
19:31.43 | BabelO | +QtopiaVpnManager |
19:33.04 | goxboxlive | BabelO: This is before : http://pastebin.no/1492 |
19:33.46 | BabelO | it is ok |
19:34.07 | goxboxlive | ok the i launch |
19:35.40 | goxboxlive | gnokii works, the i tr to launch |
19:36.53 | goxboxlive | BabelO: |
19:36.56 | goxboxlive | 02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC |
19:36.56 | goxboxlive | 53 3a 20 22 49 52 41 22 0d 0a 0d 0a 4f 4b 0d | S: "IRA" OK |
19:36.56 | goxboxlive | Received message type 61 |
19:36.56 | goxboxlive | Initialisation completed |
19:36.56 | goxboxlive | Unable to open '/usr/share/zoneinfo/America/New_York' |
19:36.57 | goxboxlive | QTimeZone::data Can't create a valid data object for 'America/New_York' |
19:36.58 | goxboxlive | Segmentation fault |
19:37.19 | goxboxlive | Maybe it has something to do with the TimeZone stuff. How do i disable it? |
19:37.19 | BabelO | but nothing at screen ? right ? |
19:37.27 | goxboxlive | well, it starts |
19:37.29 | BabelO | no i have same error and it works |
19:37.51 | goxboxlive | and i can see the screen for about 5 sec, then it segfaults. So it is working better that with the one i build |
19:38.07 | BabelO | yes, but why |
19:38.10 | goxboxlive | Hmm so why is your working and not mine? |
19:38.29 | goxboxlive | I'll download your htcphone and do a diff |
19:38.34 | goxboxlive | is it ok? |
19:38.50 | BabelO | yes, but it is the same |
19:38.55 | BabelO | tsdotry with mine |
19:39.09 | goxboxlive | ok |
19:39.17 | goxboxlive | then i dont |
19:39.23 | BabelO | maybe now it is a issue with battery reading |
19:39.28 | goxboxlive | wich crosscompiler are you using? |
19:40.18 | BabelO | arm-none-linux-gnueabi- from here http://www.codesourcery.com/gnu_toolchains/arm/faq.html |
19:41.24 | goxboxlive | Ok, i am using the one form OE |
19:41.52 | goxboxlive | I tried with the one from codesourery but tslib failed . |
19:42.12 | goxboxlive | So you havent got opie2 running for longer than 5 sec you self? |
19:42.43 | BabelO | no it is working an hour or more |
19:43.00 | goxboxlive | But why is mine failing after 5 sec, and not on BA? |
19:43.21 | BabelO | can you do strace with this one now ? |
19:45.04 | goxboxlive | yes of course |
19:47.15 | goxboxlive | BabelO: http://pastebin.no/1493 |
19:48.01 | cr2 | hi |
19:48.09 | BabelO | hii cr2 |
19:48.14 | cr2 | goxboxlive: can you install gdb ? |
19:49.22 | goxboxlive | i have it installed |
19:49.57 | goxboxlive | cr2: but how do i use gdb? |
19:50.49 | cr2 | gdb /where7is/my/qpe |
19:50.55 | cr2 | gdb> run |
19:51.09 | cr2 | (gdb) run |
19:55.19 | goxboxlive | cr2: But now it didnt stop, i have the qtopia running now, but it has froozen: http://pastebin.no/1496 |
19:56.13 | cr2 | ok, so it's the same place as tsdogs |
19:56.21 | goxboxlive | ok |
19:56.26 | cr2 | can you type 'bt' and the gdb prompt ? |
19:56.56 | cr2 | after qpe carshes. |
19:57.52 | *** join/#htc-linux twostupiddogs (n=twostupi@62.123.180.130) |
19:58.20 | tsdogs | Hi all, just have to eat and will be back |
19:58.31 | goxboxlive | (gdb) bt |
19:58.31 | goxboxlive | #0 0x40c05368 in QExportedBackground::colorize () from /opt/Qtopia/lib/libqtopia.so.4 |
19:58.31 | goxboxlive | #1 0x40c05770 in QExportedBackground::setExportedBackground () from /opt/Qtopia/lib/libqtopia.so.4 |
19:58.31 | goxboxlive | #2 0x0003a874 in ?? () |
19:58.38 | tsdogs | BabelO can you mail me how to get the image too |
19:58.57 | cr2 | ok. |
20:00.19 | BabelO | tsdogs: i write to you |
20:03.36 | cr2 | what is QTOPIA_ENABLE_EXPORTED_BACKGROUNDS ? |
20:04.32 | cr2 | private: |
20:04.32 | cr2 | <PROTECTED> |
20:04.32 | cr2 | <PROTECTED> |
20:04.55 | cr2 | probably some phone pixmap is missing ? |
20:07.20 | cr2 | void PhoneLauncher::updateBackground() |
20:07.20 | cr2 | { |
20:07.33 | cr2 | is don't think this code should segfault. |
20:08.21 | BabelO | cr2: but it is my image binary that goxbox run |
20:09.40 | cr2 | <PROTECTED> |
20:09.41 | cr2 | <PROTECTED> |
20:10.00 | cr2 | maybe this pointer is NULL ? *expBg.bgPm |
20:10.06 | cr2 | it's not checked in the code. |
20:10.26 | cr2 | you have 240x320 and goxboxlibe has 480x640 |
20:10.41 | BabelO | cr2: yes |
20:12.13 | cr2 | so the screen pixmap size differ. |
20:12.41 | cr2 | is there any screen size setting hardcoded or set ? |
20:14.22 | ljp | exported backgrounds make the background image show through |
20:14.40 | ljp | odd that that segfaults. kurt |
20:15.22 | ljp | i mean, kurt made some changes there, for transformed displays |
20:15.51 | BabelO | hi ljp |
20:16.27 | BabelO | it is working on my blueangel, is it cause by autodetect ? |
20:20.55 | ljp | shouldn't be |
20:23.23 | cr2 | ljp: should we reinvent/reimplement the phone api for our phones ? is there any chance that something will be opened soon ? |
20:24.24 | ljp | no chance, sorry. I have tried many times ;( |
20:24.28 | cr2 | ok. |
20:24.44 | ljp | at least the headers are available |
20:25.01 | cr2 | so we are allowed to reuse the headers ? |
20:25.07 | cr2 | and the documentation. |
20:25.14 | ljp | :) true that |
20:25.19 | cr2 | ok. |
20:25.46 | cr2 | i don't know how close we can mimick the simtoolkit api. |
20:25.57 | cr2 | but on some phones it should be possible. |
20:26.04 | cr2 | if it's really needed. |
20:27.36 | ljp | ya, thats just extra 'applications' |
20:28.12 | ljp | on my sim, its 'backup contacts to optusmobile servers' |
20:28.52 | cr2 | ljp: another question. are the qt3compat functions completely removed from qtopia ? |
20:28.59 | ljp | yes |
20:29.10 | cr2 | i've tried to port a qt3 app, and failed miserably ;) |
20:29.25 | cr2 | it's probably easier to rewrite the code then. |
20:30.08 | ljp | yep :) |
20:30.15 | ljp | depending on the app/code |
20:30.35 | ljp | thats why opieII started over with qtopia4 |
20:30.47 | cr2 | yes, unfortunately. but on the other hand the code bloat is unacceptable in embedded devices. |
20:31.07 | cr2 | ok. |
20:32.34 | BabelO | ljp: can you explain me how i can reuse callscreen.xml ? is it already loaded and how can i call it ? |
20:33.00 | BabelO | there is a lot of possibility i see :) |
20:36.29 | ljp | thats used by the theming engine |
20:37.08 | BabelO | so it is already loaded. i only need to show it when a RING event occur |
20:40.02 | goxboxlive | ljp: But first of all, could you update the opie cvs and add missing files to it? |
20:40.44 | goxboxlive | babelO Why cant you ask for a account on opie2 cvs so yu also have the psoibility to upload files |
20:41.44 | ljp | I can get you an account, but i looked into those missing files. not sure where two of them come from |
20:43.59 | BabelO | ljp: for itemcontrol.cpp it look strange |
20:52.05 | BabelO | ljp: and appearance segfault too, like last time before you fix it |
21:10.00 | cr2 | BabelO: what is the standalone gnokii configure string ? |
21:10.45 | BabelO | configure string ? to init modem ? |
21:12.57 | cr2 | no. |
21:13.01 | cr2 | ./configure |
21:13.24 | cr2 | there is too much autogenerated stuff from you in the CVS :) |
21:13.34 | BabelO | ah, wait i look if i keep the correct string |
21:13.53 | BabelO | yes, because, i can't found the correct one so i do some change :( |
21:14.36 | tsdogs | BabelO: on mine the image is almost working, I miss the apps etc, but I see the background. No segfaults here... |
21:14.43 | tsdogs | cr2: I added this: |
21:14.44 | tsdogs | [21:57] <BabelO> ftp 82.238.28.28 port 5060 |
21:14.44 | tsdogs | [21:57] <BabelO> login : invite |
21:14.44 | tsdogs | [21:58] <BabelO> password : invite |
21:14.44 | tsdogs | [21:58] <BabelO> file opie2-binary.tar.bz2 |
21:15.05 | tsdogs | oops this is a really bad post **********UK |
21:15.10 | tsdogs | --without-xgnokiidir --without-x |
21:15.21 | BabelO | so tsdogs it is working ? |
21:15.22 | tsdogs | please BabelO change the pwd |
21:15.32 | tsdogs | Sorry |
21:16.01 | cr2 | cat: xgnokii/VERSION: No such file or directory |
21:16.15 | BabelO | cr2: ok i add it |
21:16.18 | tsdogs | well, I had to remove the buttons stuff |
21:16.39 | tsdogs | disable apm (strange things happening) |
21:17.23 | tsdogs | disable phone |
21:17.23 | cr2 | config.status: error: cannot find input file: po/Makefile.in.in |
21:19.23 | BabelO | cr2: i ve no Makefile.in |
21:23.29 | cr2 | i've made a diff with 0.6.14 |
21:23.42 | BabelO | ok ;) |
21:24.21 | cr2 | PATH=~/stuff/tmp/cross/bin/:$PATH ./configure --without-x --host=arm-angstrom-linux-gnueabi |
21:24.39 | cr2 | PATH=~/stuff/tmp/cross/bin/:$PATH make distclean |
21:24.50 | cr2 | PATH=~/stuff/tmp/cross/bin/:$PATH make |
21:25.04 | BabelO | does it use htcgen.c in makefile created ? |
21:25.15 | cr2 | looks better now. |
21:25.27 | cr2 | yes. it even spews a lot of warnings. |
21:25.53 | cr2 | htcgen.c: In function 'Functions': |
21:25.53 | cr2 | htcgen.c:236: warning: dereferencing type-punned pointer will break strict-aliasing rules |
21:25.54 | cr2 | htcgen.c: In function 'StoreDefaultCharset': |
21:25.54 | cr2 | htcgen.c:311: warning: dereferencing type-punned pointer will break strict-aliasing rules |
21:26.36 | BabelO | cr2: it only to this to separate code from standard AT, now we need to add our HTC command here ;) |
21:27.06 | cr2 | i think we should write a script that logs and checks all ? and =? responses. |
21:27.58 | BabelO | cr2: yes we can get that automatically from command that return all at command possible |
21:28.23 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/at+c.html |
21:28.38 | BabelO | command i ask to you few days ago :) |
21:28.43 | cr2 | afaik there is such perl script already. |
21:28.52 | cr2 | CLAC is not very useful. |
21:29.05 | cr2 | and we have the full list of commands in wiki. |
21:30.40 | cr2 | how is this generated ? |
21:30.42 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/siemens_s45-B.txt |
21:31.29 | BabelO | cr2: don't know, maybe a testcase ;) |
21:33.01 | cr2 | it was some windoz program probably ;) |
21:33.30 | cr2 | but we can recreate it as a script from this output. |
21:33.31 | BabelO | nooo, i can do something like that at work, i have some time :) |
21:33.51 | cr2 | AT Scanner by Reiner Hummel (for vindoze) |
21:34.10 | cr2 | i have a feeling i've seen such perl script somewhere. |
21:34.55 | BabelO | tsdogs: thanks to webmin that have a nice gui :) |
21:35.31 | tsdogs | Sorry again. |
21:36.39 | tsdogs | BabelO: I get this at the end: Did not receive a connection event from the qws server |
21:37.21 | BabelO | tsdogs: yes same thing for me, it come from this theme i think, with qtopia.conf it is ok |
21:38.21 | tsdogs | Then when I CTRL-C the ope, it shuts the HTCU off. Have to unplug and replug USB and gets back :/ |
21:38.37 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/siemens_s55.txt |
21:39.08 | BabelO | tsdogs: because of apm support, you have to close apmd before starting |
21:39.18 | tsdogs | Though I was using qtopia.conf ... |
21:39.21 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/ericsson_t29.txt |
21:39.34 | BabelO | tsdogs: so why it is working now ? |
21:39.35 | tsdogs | APMD is shut |
21:40.02 | tsdogs | I'm going to see what's the difference between the two images. |
21:40.24 | BabelO | cr2: lot of at command ;) |
21:40.42 | tsdogs | But I think we should get the CVS up, so we are at least working on the same version... |
21:40.56 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/unprocessed/Novatel-Merlin_U530.txt |
21:41.19 | tsdogs | We (goxboxlive and I) are probably using an updated version of something... |
21:41.30 | tsdogs | What kernel you using? |
21:42.05 | tsdogs | I saw there was a bug to qte-mm with new version of headers in OE |
21:42.16 | tsdogs | so it was not finding PAGE_SIZE... |
21:42.20 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/unprocessed/PanasonicGD87.txt |
21:42.29 | tsdogs | Same thing for Opie2. |
21:42.40 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/unprocessed/OPTIONGlobev1_04.txt |
21:43.01 | goxboxlive | tsdogs: We are using the same cross compiler, BabelO is using the one fromcodesourcery |
21:43.02 | BabelO | tsdogs: i m using my own kernel, it is latest from handhelds.org |
21:43.07 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/unprocessed/LG7020.txt |
21:44.02 | tsdogs | ok |
21:44.26 | cr2 | BabelO: i think it can be done as a chat script of something like that. |
21:44.44 | BabelO | cr2: ok ;) |
21:46.54 | cr2 | BabelO: it's something different ;9 |
21:46.57 | cr2 | <PROTECTED> |
21:47.31 | BabelO | :) |
21:47.46 | cr2 | but similar :) |
21:48.09 | cr2 | we don#t have only historical interest. |
21:48.21 | cr2 | http://gatling.ikk.sztaki.hu/~kissg/gsm/atscan/siemens_s40-A.txt |
21:48.49 | cr2 | i think just to grep AT+ from these lists. |
21:51.15 | BabelO | yes it is good grep AT+ at-cmd.txt > at-send.txt |
21:51.27 | BabelO | now send at-send.txt file to /dev/ttyS0 |
21:51.46 | BabelO | need a small wait between each line |
21:53.04 | cr2 | sleep 1 |
21:53.21 | cr2 | and run over usb with 'script' |
21:53.51 | BabelO | yes that's what i m trying ;) |
21:55.04 | cr2 | i've counted 365 commands. |
21:55.26 | cr2 | actually we don't have many of them, but have others. |
21:55.48 | cr2 | cat * | sed 's/\r//' | fgrep AT+ | sort | uniq | wc -l |
21:56.56 | cr2 | 211 |
21:56.59 | cr2 | cat * | sed 's/\r//' | fgrep AT+ | sort | uniq | grep '?' |
21:57.42 | cr2 | 3 are bogus. 208 |
21:58.08 | cr2 | goxboxlive: still here ? |
21:58.14 | goxboxlive | yes |
21:58.35 | cr2 | can you feed there commands to universal ? |
21:59.20 | goxboxlive | i'll do it tomorrow |
22:00.07 | cr2 | ok. |
22:00.27 | pof | hi... r u trying to know all the at commands supported by a radio ? |
22:01.15 | cr2 | pof: not really. only to check the responses. |
22:01.27 | cr2 | the at command list is in wiki. |
22:01.33 | pof | ok :) |
22:01.42 | pof | u can extract the command list from the radio itself |
22:01.58 | cr2 | with the parameters ? |
22:02.32 | cr2 | good luck with AT@EMBEDDEDLOG and such. |
22:03.25 | cr2 | pof: how do we resolve the strings ? it's really a crucial things... |
22:03.41 | pof | just do like this: |
22:03.43 | cr2 | for the SPL |
22:03.51 | pof | decoderadio.pl GSM.nb |
22:04.19 | pof | radare -S 4 GSMdecoded.nb |egrep -i "(at@|at\+)" |
22:04.52 | pof | there u get all the at commands supported :) |
22:04.52 | cr2 | ok :) |
22:05.44 | pof | cr2: resolve all the strings for the SPL... i don't know, what i sent u is all i got :( |
22:05.45 | cr2 | i mean the ida. |
22:05.47 | *** join/#htc-linux Foxdie` (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) |
22:05.58 | cr2 | yes, we are missing some mapping, so the string addresses are linked to the memory locations. |
22:06.56 | pof | there's a part we don't know how to map |
22:08.34 | pof | why is it so crucial ? |
22:11.17 | cr2 | because you'll immediately know by references which code works with these strings. |
22:12.02 | cr2 | if you are linking 'btrouter' from 0xdeadbeef, then the bt init code is somewhere around. or the LCD and so on. |
22:12.38 | cr2 | 0x91a2xxxx in the disassembled code does not say me very much. |
22:13.08 | cr2 | it needs a correct relocation, which i don't know how to find. and apply. |
22:13.44 | Foxdie` | 0xDEADBEEF... there's a hex address I haven't seen in years |
22:13.49 | Foxdie` | since college |
22:14.16 | cr2 | m$ likes 0x12345678 |
22:14.22 | cr2 | and 0xDEADCODE |
22:14.40 | cr2 | C0DE, sorry :) |
22:16.39 | pof | :) |
22:17.30 | pof | we have several SPL versions for hermes, probably taking a different version is easy to relocate |
22:17.53 | pof | or at least we can get some different parts relocated and get valid code we don't have on the one we have now |
22:18.08 | pof | the disassembled file i sent was for 1.11 |
22:18.19 | cr2 | on universal it was easy, because the SPL runs from RAM. |
22:18.39 | cr2 | but i'm confused about mmapped ROM devices. |
22:19.03 | cr2 | like hima/ba/hermes. |
22:20.48 | pof | i have never looked at universal spl |
22:20.56 | pof | this is all new to me :) |
22:23.05 | tsdogs | cr2: i can type command to universal, you have to tell me how though! |
22:23.19 | Foxdie | hi cr2, how is your struggle with universal going? |
22:26.07 | cr2 | Foxdie: i struggle with himalaya. which does not want to exec init. for some absolutely unknow reason. i'm close to giving up for now. |
22:30.35 | Foxdie | maybe specify an alternative then call init? |
22:30.47 | Foxdie | does it lock the pda up when init is called? |
22:33.45 | cr2 | it can't exec init. tested from SD, from ramdisk, from initramfs. need to ask Kevin2 to build an image for me :) |
22:36.16 | Foxdie | true but you can specify an alt "init" to init |
22:38.16 | tsdogs | cr2: Probably a stupid question: you sure you don't miss some lib? it happened to me with libstdc_s.so on universal... |
22:38.34 | Foxdie | try setting it to bash so you get straight to a usable prompt, then call init and see what error it gives |
22:41.04 | cr2 | does not work too. |
22:41.17 | Foxdie | is it hanging? or kernel panic? or something else? |
22:42.29 | tsdogs | I'd try building a static busybox. |
22:42.49 | cr2 | it panic saying 'can#t exec' |
22:43.04 | cr2 | tsdogs: why does it work on all other devices ? |
22:43.20 | cr2 | and i have exactly the same setup on blueangel. |
22:43.38 | cr2 | the only 2 differing files are himalaya.c and himalaya_lcd.c |
22:43.48 | cr2 | instaed of blueangel. |
22:45.00 | tsdogs | ok. no idea here. |
22:45.22 | *** join/#htc-linux TripleDES (n=sergio@118.pool85-50-132.dynamic.orange.es) |
22:45.26 | BabelO | cr2: is your kernel compile with eabi option too? |
22:49.42 | cr2 | yes. |
22:50.19 | cr2 | i've just taken the ba defconfig and replaced 2 files. |
22:50.54 | cr2 | the irrelevant ba-specific files diappeared automagically. |
22:53.54 | BabelO | i have to update touchscreen on BA :( need to add a touch pin to adc converter |
22:54.38 | cr2 | i#m going to bed. good night. |
22:54.45 | BabelO | good night |
22:54.51 | tsdogs | good night |
22:55.26 | tsdogs | BabelO: I really cannot find much difference in the two opie2 versions. |
22:55.47 | tsdogs | Of course all the binary differ, as we use different compilers. |
22:56.04 | tsdogs | And that's not an easy task to debug. |
22:56.07 | tsdogs | :( |
22:56.22 | BabelO | :( strange, but mine is working, etc directory are same ? |
22:56.31 | tsdogs | yes |
22:56.32 | BabelO | you run over VNC ? |
22:56.54 | tsdogs | you have media and mine has packagemanager but that's not the problem |
22:56.55 | BabelO | it hand around 5s with vnc on BA |
22:57.06 | tsdogs | I tryed yours, but did not work |
22:57.21 | tsdogs | On mine it connect, but no screen. |
22:57.39 | tsdogs | Yesterday I had same goxboxlive issue. |
22:57.55 | BabelO | vnc take long time to connect |
22:57.58 | tsdogs | probably changing a few things this is not happening anymore. |
22:58.10 | tsdogs | yes, it waits till opie2 is started. |
22:58.20 | BabelO | is touchscreen working ? |
22:58.41 | tsdogs | well thouching it triggers some events in the log. But hard to say |
22:59.00 | tsdogs | Your version never got to load apps. |
22:59.12 | tsdogs | only boot screen and battery displayed |
22:59.20 | BabelO | to start apps, you can try -qws |
22:59.29 | tsdogs | could the missing PAGE_SIZE be the issue here? |
22:59.56 | tsdogs | ok I'll try. |
23:00.17 | BabelO | photoedit -qws |
23:00.27 | BabelO | i don't know for PAGE_SIZE |
23:01.34 | tsdogs | Is your opie2 taking long time to startup too? |
23:01.51 | tsdogs | A lot of SQL goes on if I enable logging... |
23:02.51 | BabelO | start depend on theme and service at startup |
23:03.10 | tsdogs | well the buttons really hang the start |
23:03.41 | BabelO | yes need to add autodetect for other key than keyboard |
23:04.28 | tsdogs | I simply tryed disabling all the keyboards, and also enabling only event3 keyboard, did not help |
23:05.49 | tsdogs | still initializing ... |
23:07.12 | tsdogs | hmmm something is wrong here ... |
23:08.30 | tsdogs | not working anymore... think I messed something up. |
23:10.00 | BabelO | for autodetect need to read /proc/bus/input/devices there is a type associated with event |
23:10.33 | tsdogs | I: Bus=0000 Vendor=0000 Product=0000 Version=0000 |
23:10.38 | tsdogs | N: Name="htcuniversal_ts" |
23:10.42 | tsdogs | P: Phys=touchscreen/htcuniversal_ts |
23:10.46 | tsdogs | S: Sysfs=/class/input/input0 |
23:10.50 | tsdogs | H: Handlers=event0 |
23:10.54 | tsdogs | B: EV=9 |
23:10.58 | tsdogs | B: ABS=1000003 |
23:11.02 | tsdogs | I: Bus=0019 Vendor=0001 Product=0001 Version=0100 |
23:11.06 | tsdogs | N: Name="gpio-keys" |
23:11.10 | tsdogs | P: Phys=gpio-keys/input0 |
23:11.22 | tsdogs | S: Sysfs=/class/input/input1 |
23:11.26 | tsdogs | H: Handlers=kbd event1 |
23:11.30 | tsdogs | B: EV=3 |
23:11.34 | tsdogs | B: KEY=100000 0 0 0 |
23:11.38 | tsdogs | I: Bus=0000 Vendor=0000 Product=0000 Version=0000 |
23:11.42 | tsdogs | N: Name="asic3-keys" |
23:11.46 | tsdogs | P: Phys= |
23:11.50 | tsdogs | S: Sysfs=/class/input/input2 |
23:11.54 | tsdogs | H: Handlers=kbd event2 |
23:11.58 | tsdogs | B: EV=23 |
23:12.02 | tsdogs | B: KEY=100000 80 0 c1681 10 0 3 |
23:12.06 | tsdogs | B: SW=3 |
23:12.10 | tsdogs | I: Bus=0019 Vendor=0000 Product=0000 Version=0000 |
23:12.14 | tsdogs | N: Name="pxa27x-keyboard" |
23:12.26 | tsdogs | P: Phys= |
23:12.30 | tsdogs | S: Sysfs=/class/input/input3 |
23:12.34 | tsdogs | H: Handlers=kbd event3 |
23:12.34 | tsdogs | B: EV=100003 |
23:12.34 | tsdogs | B: KEY=1690 1b ff1ff47f f3fffffe |
23:12.34 | tsdogs | Nope. Have to clean and copy files again. |
23:12.35 | tsdogs | with rsync now it's much better ;) |
23:13.22 | BabelO | all keys are have H: Handlers=kbd eventX |
23:14.20 | tsdogs | I have this: export QWS_KEYBOARD="kernelkeymapkbdhandler:/dev/input/event3" |
23:14.47 | tsdogs | I also tryed with empty QWS, and pointing to /dev/null |
23:15.18 | BabelO | yes i try /dev/tty0 butit corrupt keyboard keycodes |
23:16.20 | tsdogs | Actually I don't care about the keyboard right now. Is there a way to disable it? |
23:16.42 | BabelO | remoe *.so in qt_plugins/input with name *kbdhandler ;) |
23:18.39 | tsdogs | it hangs here. Buttons (I forgot) |
23:18.41 | tsdogs | UI : PhoneMainMenu: |
23:18.41 | tsdogs | UI : 4 x 3 |
23:18.41 | tsdogs | UI : Mapping keys: "123456789*0#" |
23:18.41 | tsdogs | UI : Key "1" : "Applications/datebook.desktop" |
23:19.40 | tsdogs | when I remove defaultbuttons.conf I get a lot of: Cannot map key to QMenu |
23:19.59 | tsdogs | the phoneMainMenu is mapped from 4x3 to 3x3 |
23:20.27 | tsdogs | now it startd (and fast) at least boot screen |
23:22.00 | BabelO | [device] and [inputmethods] section, that's here you set driver for keyboard |
23:22.17 | tsdogs | root@htcuniversal:/opt/Qtopia/bin$ ./photoedit -qws |
23:22.29 | tsdogs | Support : Get device id "{802be8cf-25d6-43eb-88ec-1b2204ec668c}" |
23:22.33 | tsdogs | SharedMemCache : Setup image cleanup hook |
23:22.37 | tsdogs | SharedMemCache : search for "_$QTOPIA_BGSTATE_0_$R0" |
23:22.42 | tsdogs | SharedMemCache : searching for _$QTOPIA_BGSTATE_0_$R0 |
23:22.46 | tsdogs | SharedMemCache : find: starting item 1136 has value -1 |
23:22.49 | tsdogs | SharedMemCache : didn't find _$QTOPIA_BGSTATE_0_$R0 (hash: 1136 ) |
23:22.52 | tsdogs | SharedMemCache : search for "_$QTOPIA_BG_0_$R0" |
23:22.57 | tsdogs | SharedMemCache : searching for _$QTOPIA_BG_0_$R0 |
23:22.57 | tsdogs | SharedMemCache : find: starting item 602 has value -1 |
23:22.57 | tsdogs | SharedMemCache : didn't find _$QTOPIA_BG_0_$R0 (hash: 602 ) |
23:22.57 | tsdogs | Quicklauncher : QuickLauncher invoked as: "photoedit" |
23:22.57 | tsdogs | Quicklauncher : created main window for quicklaunched photoedit |
23:22.57 | tsdogs | But nothing happens on the screen, so I suppose that it's not actually working ... |
23:23.22 | BabelO | it show thumbail of jpg file you have on sd card |
23:24.21 | BabelO | or in your path |
23:24.28 | tsdogs | nothing happened... |
23:24.48 | BabelO | try mixer -qws |
23:25.43 | *** join/#htc-linux Foxdie` (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) |
23:25.54 | tsdogs | I started it before opie was started and is shows. |
23:26.57 | tsdogs | now I have opie background, exept for the bar |
23:27.26 | ljp | }"K:.lllllllllllllll-0p4~4~4~4~[p |
23:27.39 | tsdogs | he? |
23:28.32 | tsdogs | I tryed the quiklauncer, and now display is green. Cannot map key to QMenu |
23:30.20 | BabelO | going to bed, to late :( |
23:30.26 | BabelO | goog night |
23:30.31 | tsdogs | agreed. good night |
23:37.22 | ljp | attack of the 20 month old.. sorry :) |