| 00:00.08 | cr2 | SC32442A45_Users_Manual_Rev11.pdf |
| 00:00.42 | cr2 | some gpios are already documented |
| 00:00.45 | cr2 | http://wiki.xda-developers.com/index.php?pagename=HermesGPIO |
| 00:01.28 | pancake | ok |
| 00:11.34 | cr2 | for gpios ? |
| 00:11.41 | pancake | yes |
| 00:12.47 | cr2 | 0x56000000 is the GPA config, and so on. |
| 00:18.30 | pancake | addtracewatch command is not available |
| 00:19.12 | pancake | i'm using addwatch for 0x56000000 and further addresses but not results |
| 00:23.03 | cr2 | ok. |
| 00:27.31 | pancake | uhm, there's a limit of 16, i can write a perl script to automatize these checks |
| 00:27.38 | cr2 | BabelO: still not asleep ? |
| 00:31.27 | cr2 | pancake: ? there are not that many gpio registers |
| 00:31.39 | cr2 | watch only the data. |
| 00:31.52 | pancake | how? |
| 00:32.53 | cr2 | there are 9 gpio regs. |
| 00:33.25 | cr2 | watch only +4 |
| 00:34.04 | cr2 | 0x56000004, 0x56000014, ... |
| 00:34.26 | pancake | ah ok |
| 00:36.47 | pancake | no results |
| 00:41.36 | *** join/#htc-linux kelly_ (n=kelly@ppp206-236.lns3.mel4.internode.on.net) |
| 00:50.36 | cr2 | good night. |
| 00:55.29 | pancake | night |
| 01:13.05 | *** part/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 02:19.16 | *** join/#htc-linux Whacko (n=Whacko@s5593e8a2.adsl.wanadoo.nl) |
| 02:19.45 | *** join/#htc-linux shaun33_away (i=PPCUzer@cslnk01.ispdr.net.au) |
| 03:25.18 | Kevin2 | cr2: I've added a preliminary MMU based memory tracing system to mainline haret. To use run "cvs up", compile the latest haret, and then run something like "set l1trace p2v(0x5a000000)" followed by "wi 1". (Where 0x5a000000 is the 1meg range to trace - for example, i2c on hermes.) This is very preliminary, but you're welcome to play with it. |
| 05:07.12 | *** join/#htc-linux sadeness_ (n=LamersIn@nat2.rlan.ru) |
| 05:31.02 | *** join/#htc-linux RoEn_PC (n=roen@p54A66EBD.dip.t-dialin.net) |
| 05:36.35 | *** join/#htc-linux tudenbart (n=willi@xdsl-213-196-243-162.netcologne.de) |
| 06:56.58 | *** join/#htc-linux eremias (n=fdsfs@ACAE343B.ipt.aol.com) |
| 07:01.53 | *** join/#htc-linux rob_w (n=bob@p213.54.18.218.tisdip.tiscali.de) |
| 07:04.42 | *** part/#htc-linux shaun33_away (i=PPCUzer@cslnk01.ispdr.net.au) |
| 07:11.44 | *** part/#htc-linux eremias (n=fdsfs@ACAE343B.ipt.aol.com) |
| 07:34.04 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn49.91-127-60.t-com.sk) |
| 07:35.07 | SniZ|work | rmoravcik, привет |
| 07:38.13 | sadeness | SniZ|work, ÄÁÖÅ ÔÁË? |
| 07:38.22 | SniZ|work | гггг |
| 07:38.42 | SniZ|work | Gjosh atzkey! |
| 07:41.19 | sadeness | SniZ|work, Á òÏÍÁÎ ÔÏÖÅ ÎÁÛ? |
| 07:44.09 | rmoravcik | SniZ|work: greetings :), but turn your brain to english please |
| 07:49.28 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
| 07:49.34 | SniZ|work | oh noooooooooo |
| 07:49.43 | sadeness | rmoravcik, russian mode off :D |
| 07:50.03 | SniZ|work | bliat kakaya kodirovka? |
| 07:50.28 | sadeness | SniZ|work, ÜÔÏ îå ÒÕÓÓËÉÊ ËÁÎÁÌ. |
| 07:50.34 | SniZ|work | rmoravcik, its Chtulhu language |
| 07:50.47 | SniZ|work | à òàê? |
| 07:51.21 | SniZ|work | ÂÌÑÔØ |
| 07:52.48 | SniZ|work | sadeness, ÁÌÏ |
| 07:53.20 | sadeness | SniZ|work, yeah? |
| 07:53.29 | SniZ|work | ÐÉÛÉ ÐÏ ÒÕÓÓËÉ |
| 07:53.35 | sadeness | SniZ|work, ÚÁÞÅÍ? |
| 07:53.40 | SniZ|work | ÈÅÚ, |
| 07:53.59 | SniZ|work | Á ÔÙ ÐÉÛÅÛ ÐÒÏÅËÔ ÉÌÉ ÐÒÏÓÔÏ ÀÚÁÅÛØ ËÐË? |
| 07:54.37 | sadeness | ÎÅÔ, ÔÏÌØËÏ ÉÓÐÏÌØÚÕÀ. ÓÌÕÈ, ÍÙ ÔÁË ÂÁÎ ÚÁÒÁÂÏÔÁÅÍ. :) |
| 07:54.56 | SniZ|work | ÄÁ ÎÕ |
| 07:55.20 | SniZ|work | ÒÁÚ×Å ÛÔÏ ËÁÎÓÅÒ×Á ÂÙ£ÂÙ×ÁÔØÓÑ ÂÕÄÅÔ |
| 07:56.24 | SniZ|work | http://absurdopedia.wikia.com/wiki/%D0%98%D0%B7%D0%BE%D0%B1%D1%80%D0%B0%D0%B6%D0%B5%D0%BD%D0%B8%D0%B5:20060829843242174pixktulhibn3.jpg |
| 07:57.20 | SniZ|work | okey, lets get the patry on! |
| 07:59.52 | SniZ|work | http://absurdopedia.wikia.com/wiki/%D0%98%D0%B7%D0%BE%D0%B1%D1%80%D0%B0%D0%B6%D0%B5%D0%BD%D0%B8%D0%B5:Cultists.jpg |
| 08:01.06 | SniZ|work | http://www.hello-cthulhu.com/] |
| 08:01.09 | sadeness | SniZ|work, why all that stuff here? |
| 08:01.20 | SniZ|work | i donno, but its real funny |
| 08:04.22 | SniZ|work | sadeness, what device you have? |
| 08:05.38 | sadeness | SniZ|work, rx3715, s200 |
| 08:05.59 | SniZ|work | sadeness, i had 3715, but i sold, i broke jack |
| 08:06.03 | SniZ|work | and buy s100 |
| 08:08.08 | *** join/#htc-linux goxboxlive (n=goxboxli@206.80-202-161.nextgentel.com) |
| 08:25.18 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.98.4) |
| 08:28.06 | goxboxlive | good morning psokolovsky |
| 08:28.14 | SniZ|work | ÐÒÅ×ÅÄÄ |
| 10:04.46 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
| 10:45.48 | *** join/#htc-linux RoEn_PC (n=roen@p54A66EBD.dip.t-dialin.net) |
| 11:01.41 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 11:08.58 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 11:15.54 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 11:23.12 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 11:30.32 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 11:37.57 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 11:42.25 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 11:44.51 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 11:52.14 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 12:17.02 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
| 12:31.28 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
| 12:42.40 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.250) |
| 12:56.27 | goxboxlive | hi |
| 12:57.08 | SniZ|work | =\ |
| 12:58.04 | goxboxlive | and that means yo are fed up because you are at work ? |
| 12:58.27 | SniZ|work | i donno |
| 12:58.49 | goxboxlive | dont speak english? |
| 12:59.05 | SniZ|work | yes |
| 12:59.13 | goxboxlive | i c |
| 12:59.17 | SniZ|work | ok |
| 12:59.41 | SniZ|work | i know only russia |
| 12:59.42 | SniZ|work | n |
| 12:59.48 | goxboxlive | ok |
| 12:59.48 | SniZ|work | belarussian |
| 12:59.53 | goxboxlive | i c |
| 13:06.47 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 13:12.43 | ellisway | afternoon all |
| 13:14.13 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 13:21.37 | goxboxlive | hi ellisway |
| 13:23.42 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 13:23.48 | ellisway | hi goboxlive |
| 13:23.56 | ellisway | ows it going |
| 13:24.02 | ellisway | hows * |
| 13:29.41 | goxboxlive | i'm fine. And you? |
| 13:31.06 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 13:31.22 | ellisway | not 2 bad |
| 13:32.00 | ellisway | is there a page anywhere tat shows the i2c commands to enable the microphone on te universal |
| 13:33.51 | ellisway | after seeing it make and receive calls i`m looking forward to using the universal with linux as the main os |
| 13:38.24 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 13:45.49 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.187.133) |
| 13:46.46 | goxboxlive | ellisway, we dont have sms ready yet. But i guess we are not far from haveing it eady. |
| 13:47.19 | goxboxlive | cr2 promised me to take a look at the sounddriver this easter. He has one day left, lets hope something happends today. |
| 13:47.32 | goxboxlive | ellisway: DId you try out my cab install files? |
| 13:47.34 | ellisway | fingers crossed |
| 13:47.39 | ellisway | yeh |
| 13:47.43 | goxboxlive | cool? |
| 13:47.58 | ellisway | cab file itself is coo |
| 13:48.23 | ellisway | but i found it awkward to partition and format the sd card with ext2 as the 1st partition |
| 13:48.29 | goxboxlive | yes, i wish there eas a way to have it all in a cab file, like it would even format your sd card to ext2 |
| 13:48.33 | ellisway | ext3 even |
| 13:49.28 | goxboxlive | Yes that's right, but i had allready made the cab files and with a linux computer it is easier to have it on partition 1. I think it's just to get used to it . |
| 13:49.44 | ellisway | mainly because i`m using windows on my desktop system and dont have card readers on any of my *nix systems |
| 13:49.48 | goxboxlive | I guess it will be easier for new users |
| 13:49.57 | ellisway | yeh |
| 13:50.09 | goxboxlive | But, isent winxp able to read vfat on partition 2? |
| 13:50.16 | ellisway | aslong as new users dont use the sd card for anything else |
| 13:50.21 | ellisway | nope |
| 13:50.29 | goxboxlive | realy? |
| 13:50.38 | goxboxlive | ohh, then i guess i shpould change it |
| 13:50.50 | ellisway | every windows system i`ve tried so far has said that it cant enable the second partition |
| 13:51.09 | goxboxlive | i thouht that winxp/wince where capeable to read vfat on partition 2 |
| 13:51.29 | ellisway | and because windows is to stupid to know about ext2/3 it thinks that te partition it can see is not formatted |
| 13:51.45 | goxboxlive | i c, well i'' change then |
| 13:52.29 | ellisway | so could be a bit dodgy for some new users as they could potentialy reformat their ext2/3 partition without realizing |
| 13:53.04 | goxboxlive | ok, i'll try it out my self first. My GF has a winxp computer |
| 13:53.16 | *** join/#htc-linux TripleDE3 (n=sergio@89.129.187.133) |
| 13:53.31 | ellisway | i havn`t tried under windows vista |
| 13:53.48 | ellisway | but i can try that l8r on today |
| 13:54.53 | ellisway | i keep meaning to ask if its wort creating a 128mb partition on the sdcard for a swap partition |
| 13:55.00 | ellisway | but always for get to ask |
| 13:55.09 | RoEn_PC | goxboxlive: MDA Pro works great with opie ! nice work !!!!! |
| 13:55.43 | RoEn_PC | files are from http://gnulinux.biz/files/Universal/ |
| 13:56.04 | goxboxlive | RoEn_PC: thats great |
| 13:56.36 | goxboxlive | ellisway: I have allways a swap partition. It is in use some times, but youdont need as big as 128 |
| 13:56.50 | RoEn_PC | i tested opie and angström |
| 13:56.56 | goxboxlive | good |
| 13:57.03 | ellisway | k |
| 13:57.27 | ellisway | so next time i reformat my sdcard i`ll go for partition 1 as vfat |
| 13:57.51 | ellisway | partition 2 as swap and partition 3 as ext3 |
| 13:59.10 | ellisway | goboxlive what size u use for swap on universal ? |
| 13:59.59 | ellisway | also i`m wondering if we could use a swapfile on the vfat partition |
| 14:00.45 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 14:00.50 | ellisway | simalar to how a knoppix livecd creates its swap file when it can see a vfat partition |
| 14:03.43 | goxboxlive | ellisway: You are totaly right, the vfat partition on sdc2 is not working in WinCe. Stupid windws. I have to change it. |
| 14:04.10 | goxboxlive | I am using 128MB, but it's totaly oversized. I guess 32MB will be enough |
| 14:04.45 | ellisway | what u think bpout the possibility of using a swap file rather than a swap partition |
| 14:04.53 | goxboxlive | I dont think i will introduse swap nor new users. So I will make a vfat on partition 1 and linux partition on ext2 |
| 14:05.33 | goxboxlive | A swap partition will not be vieable as a part1 or 2 or 3. |
| 14:05.35 | goxboxlive | bbl |
| 14:06.13 | ellisway | k |
| 14:08.02 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 14:17.29 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 14:24.54 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 14:29.05 | *** join/#htc-linux cyrill62 (n=cyrill62@86.210.20.81.dynamic.adsl.abo.nordnet.fr) |
| 14:32.15 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 14:38.05 | goxboxlive | ellisway: I have just edited the howtoinstall wiki page. Could yo take a look too se if there is something i have forgot? http://www.handhelds.org/moin/moin.cgi/UniversalHowtoInstallLinux |
| 14:38.19 | goxboxlive | I will create new cab files now |
| 14:39.34 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.187.133) |
| 14:46.59 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 14:55.24 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 15:03.33 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 15:04.02 | goxboxlive | Now everything should b eupdated to run form partition 2 |
| 15:10.54 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 15:17.05 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.187.133) |
| 15:24.38 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.187.133) |
| 15:35.35 | *** join/#htc-linux unleash (n=IceChat7@argos.campus-sbg.at) |
| 15:38.36 | unleash | hi |
| 15:40.55 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.98.4) |
| 15:43.07 | *** join/#htc-linux unleash (n=unleash@argos.campus-sbg.at) |
| 15:45.30 | *** join/#htc-linux unleash (n=unleash@argos.campus-sbg.at) |
| 16:00.26 | *** join/#htc-linux eremias (n=fdsfs@ACB51A8C.ipt.aol.com) |
| 16:13.56 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 16:21.01 | goxboxlive | hmm i have X running with Opie, now how do i launch Openmoko-dialer |
| 16:25.52 | *** join/#htc-linux BabelO (n=kvirc@lun34-2-82-238-28-28.fbx.proxad.net) |
| 16:28.48 | *** join/#htc-linux rob_w (n=bob@p213.54.18.218.tisdip.tiscali.de) |
| 16:38.17 | goxboxlive | haha i have openmoko-messages running in Opie with Xqt |
| 16:38.28 | unleash | is someone experienced in using linux on qtetk 9090? |
| 16:39.07 | goxboxlive | hi unleash |
| 16:39.15 | unleash | hi |
| 16:39.42 | goxboxlive | yes there are a lot of people here using 9090. But we call it Blueangel here. It's the HTC dev name for it. |
| 16:39.53 | unleash | yes, blueangel. |
| 16:39.59 | unleash | ack |
| 16:40.23 | unleash | well, i am looking for a win replacement on our blueangels ... |
| 16:41.04 | unleash | especially because we have some special software that tis only running on wm5 and no longner on wm2003. |
| 16:42.06 | unleash | therefore the devices arer currently useless and free for new adventures ... |
| 16:42.50 | goxboxlive | Yes, i have also openmoko-dialer running with opie |
| 16:43.22 | unleash | i am quite new to linux on mobiles. |
| 16:43.32 | goxboxlive | I think cr2 and BabelO is the ones should talk with. They have BA them self |
| 16:43.56 | unleash | ok, thx. |
| 16:44.21 | unleash | i think i'll come along more often in the next days ... |
| 16:45.53 | unleash | i want to make use of a bt gps mouse and send the coordinates using gprs. that should/has to be possible afterwards. |
| 16:56.43 | rob_w | unleash, bt is quite supported even on the ba |
| 16:57.23 | unleash | i think i will start with one device and look how far i will get then ... |
| 16:59.14 | rob_w | i had to sell my ba, due to the lack of time i ve , but it was one of a device .. that form factor killed me ! excellent |
| 16:59.15 | cr2 | rob_w: did you have boarid6 ? |
| 16:59.32 | rob_w | no i had 5 ,,, |
| 16:59.45 | cr2 | good for you. |
| 17:00.42 | unleash | we have two ba s here ... but i am just starting with them. |
| 17:00.43 | rob_w | mine was the one even without camera at top of the list at http://wiki.xda-developers.com/index.php?pagename=BlueangelBoardIDs |
| 17:00.54 | rob_w | cr2, why that ? |
| 17:01.26 | rob_w | cr2, found a hardware bug in id 6 ? |
| 17:02.31 | rob_w | but mine a had some funky lcd setup .. what worked for all the rest never did to me |
| 17:02.34 | cr2 | no, it sends some codes over "software i2c" during powerup to the LCD. |
| 17:02.58 | cr2 | yeah, i still can't do a proper LCD powerup. |
| 17:03.30 | rob_w | cr2, i had to drop back always to the intial 2.6 approach |
| 17:03.31 | cr2 | software i2c means some pxa gpio flipping ;) |
| 17:03.57 | rob_w | cr2 and does that influence you ? |
| 17:04.06 | cr2 | the LCD setup is very complex. |
| 17:04.27 | cr2 | on blueangel. |
| 17:04.31 | rob_w | cr2, i wonder why taht is .. |
| 17:04.46 | rob_w | i ve now used some other boards and it was never a topic for again |
| 17:04.55 | cr2 | don#t know. on himalaya there is no "soft i2c" |
| 17:05.10 | cr2 | but i can't resume the LCD on himalaya too ;) |
| 17:06.05 | cr2 | it seems i need to sit and write down all gpio bit sequences from the disassembly. |
| 17:06.06 | rob_w | the intial 2.6 code was even able to savely resume or even resume by call |
| 17:06.18 | rob_w | cr2, what a pain |
| 17:07.17 | rob_w | company`s liek htc should just throw out a some dedication, then they would have launched some sort of "openmoko" 5 years before |
| 17:08.17 | cr2 | they worked with compaq and produced ipaqs. |
| 17:08.57 | cr2 | resume by call is not more complex than resume by power button. |
| 17:09.23 | cr2 | the LCD was only "soft"-suspended and did not need full resume. |
| 17:09.41 | cr2 | i guess it wasted _some_ current. |
| 17:10.17 | cr2 | btw, on athena they even push DRAM into some slow refresh. |
| 17:11.15 | rob_w | hehe ,, how difficult can that be ? |
| 17:11.15 | cr2 | i see some very sloppy programming on himalaya. |
| 17:11.58 | rob_w | well how old is the hima now .. 6 ? |
| 17:12.05 | cr2 | they were probably on a deadline and didn't implement the 1wire monitor code properly, while the hardware is there:) |
| 17:12.26 | cr2 | don't know. 3-4 ? |
| 17:13.26 | cr2 | it was THE phone. |
| 17:13.34 | goxboxlive | cr2: What about this: http://forum.xda-developers.com/attachment.php?attachmentid=36819&d=1176138765 |
| 17:14.09 | BabelO | hi |
| 17:14.22 | goxboxlive | hi BabelO |
| 17:14.25 | unleash | hi |
| 17:14.26 | BabelO | goxboxlive: good news for opie and openmoko ;) |
| 17:15.13 | goxboxlive | I dont know about Openmoko, dont hink those guys will be so found of it, but we who preffered OPIE loves it :-) |
| 17:15.28 | cr2 | goxboxlive: cool :) |
| 17:15.43 | goxboxlive | :-) |
| 17:15.45 | cr2 | it's easy to write such gui in qt |
| 17:16.00 | cr2 | i'm more worried about what is behind. |
| 17:16.41 | goxboxlive | well, i have no idea how, so this is good enough for me so far. But i want sound now cr2, are you ready? You pomised me this easter :-) |
| 17:17.28 | cr2 | :D |
| 17:19.40 | cr2 | i think you are missing the bigger picture. |
| 17:20.27 | cr2 | i still don't understand who will switch the sound, and what does it need. |
| 17:20.53 | cr2 | pH5 told me that openmoko-dialer can not do it. |
| 17:21.17 | cr2 | it's obvious that the gsmd is also not quite the right program. |
| 17:27.37 | *** join/#htc-linux FossiFoo_ (n=Fossi@e176118035.adsl.alicedsl.de) |
| 17:28.29 | goxboxlive | oh ok, thats didnt know. |
| 17:28.39 | goxboxlive | s/thats/ / |
| 17:30.09 | goxboxlive | But what about the i2c swithing you told me about. It is just the mic wich needs to be switched. |
| 17:35.34 | cr2 | not really. you have the mic switching code already |
| 17:36.52 | goxboxlive | Yes you have told me before, but do you know how i do it so we can have a working phone? It's more important with a working phone than working mp3 player. |
| 17:37.11 | cr2 | the mono out port should be powered (1 i2c command) and the mixers should be set in such a way, that mic is linked only to the mono out (some more i2c commands) |
| 17:37.41 | cr2 | then you will have a "working" mic. |
| 17:38.14 | cr2 | if we will powerup the "external in" port, then we will get the sound from the phone, |
| 17:38.47 | cr2 | and can redirect it to the stereo speakers, headset, bt headset, record it to the SD card, etc. |
| 17:39.14 | cr2 | it's actually all about who will do this switching. |
| 17:39.41 | cr2 | some phone-mixer daemon/whatever is needed. |
| 17:40.11 | cr2 | it's all about setting up a standard that all our phones will follow. |
| 17:40.17 | goxboxlive | ok, do yopu know of any simular deamon? |
| 17:41.19 | cr2 | no. it's something that openmoko was supposed to do. i may be wrong, but it does not seem that this problem is solved. |
| 17:42.06 | goxboxlive | ohh |
| 17:42.47 | cr2 | what we may do, is to create some "phone" mixer control, like lamikr has done for gomunicator. |
| 17:43.22 | cr2 | selecting it will just link the mic to the phone. |
| 17:44.23 | goxboxlive | ok i would have made it if i could but i have no idea how to. |
| 17:45.29 | cr2 | but then you still need to teach openmoko-dialer to use it. |
| 17:45.44 | cr2 | i have no idea how the sound routing is done in openmoko. |
| 17:46.48 | cr2 | of course we may just setup the sound in such a way that only the phone will work. |
| 17:47.01 | goxboxlive | I think we should |
| 17:47.26 | goxboxlive | Like I said a couple of days ago, "i have allready ordered a TWin Sim" :-) |
| 17:51.24 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-15-150.dynamic.mnet-online.de) |
| 18:06.13 | cr2 | i'm not very informed about the openmoko status. |
| 18:06.31 | cr2 | does the (voice) phone work on neo ? |
| 18:07.38 | cr2 | heh. oe recompiles gcc-4.1.2 |
| 18:08.03 | goxboxlive | cr2: Yes, they have the phone working, but not sms |
| 18:08.18 | goxboxlive | yes i know |
| 18:10.17 | cr2 | http://lists.openmoko.org/pipermail/openmoko-devel/2007-April/000822.html |
| 18:10.22 | cr2 | "once finished" |
| 18:10.58 | cr2 | so the moko-dialer will do the switching. |
| 18:14.35 | *** join/#htc-linux tudenbart (n=willi@xdsl-81-173-171-248.netcologne.de) |
| 18:39.05 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 18:44.07 | goxboxlive | ok |
| 18:49.44 | cr2 | goxboxlive: can you run this command on your machine ? |
| 18:49.47 | cr2 | git pull git://anongit.freedesktop.org/git/xorg/proto/calibrateproto |
| 18:50.06 | cr2 | i always get "Permission denied" |
| 18:50.12 | goxboxlive | cr2: Even bether screendump http://gnulinux.biz/files//Universal/pics/sc_Mon_Apr_9_18.23.29_2007.png |
| 18:51.12 | goxboxlive | I have noticed it before too. As i am allways doing if i cant get them with OE i use them manually and put them in to the source folder. Remember to make a md5sum file of it |
| 18:51.34 | BabelO | nive screenshot goxboxlive ;) do you have any downloadable image ? |
| 18:51.43 | goxboxlive | not with openmoko-dialer |
| 18:51.55 | goxboxlive | dinner time. bbl |
| 18:54.08 | cr2 | goxboxlive: if i'll install packages manually and calculate md5sums, then i don't need oe ;-) |
| 19:07.11 | BabelO | cr2 : you have added flash rom support to himalaya ? |
| 19:09.33 | cr2 | it's not very useful. should be the same as on blueangel. |
| 19:09.58 | cr2 | there may be a gpio to enable writing. |
| 19:10.13 | BabelO | ok, i update my cvs tree to test leds support and it ask me for this ;) |
| 19:10.24 | cr2 | good thing about hima is that the DoC is supported. |
| 19:10.27 | cr2 | huh? |
| 19:10.31 | cr2 | where ? |
| 19:11.10 | BabelO | HTC Himalaya flash rom support (MACH_HIMALAYA_ROM) [N/m/y/?] (NEW) m |
| 19:11.31 | cr2 | strange. |
| 19:11.53 | BabelO | i answer m, but it is not for BA, i know |
| 19:11.55 | *** join/#htc-linux goxboxlive (n=goxboxli@206.80-202-161.nextgentel.com) |
| 19:15.06 | cr2 | sorry ;) depends on MACH_BLUEANGEL |
| 19:16.27 | cr2 | fixed. |
| 19:16.29 | BabelO | ok i ve to try new kernel with all your change ;) |
| 19:16.41 | cr2 | works for me (tm) |
| 19:18.25 | BabelO | it is good that you can spent some time on Blueangel these days :) |
| 19:24.39 | goxboxlive | BabelO: I will make a image now, with openmoko-dialer and messages installed. I'm notifying you when it is uploaded. |
| 19:26.01 | cr2 | BabelO: we need to move all the serial/IR related code to blueangel_serial.c and all the phone related code to blueangel_phone.c |
| 19:26.02 | BabelO | ok , thanks ;) |
| 19:27.37 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-15-150.dynamic.mnet-online.de) |
| 19:27.56 | BabelO | cr2: it is ok for leds, i have done two file one only for asic3 led and other for aic2 leds (wifi and bt) |
| 19:28.09 | BabelO | i cleanup code and make a diff |
| 19:30.21 | goxboxlive | wich fonts belongs here? /usr/lib/X11/fonts/misc/ |
| 19:30.34 | goxboxlive | name someonei can aply |
| 19:48.06 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 19:48.44 | cr2 | BabelO: yes, it's only for blueangel.c and blueangel_suspend.c |
| 20:05.05 | BabelO | cr2: i m updating blueangel.c file for sound from magician code and lkcl research |
| 20:11.39 | cr2 | BabelO: ? |
| 20:11.55 | cr2 | sound has nothing to do with blueangel.c |
| 20:12.56 | cr2 | you should reuse the uda1380 asoc code of pH5, with gpio & clock setup from blueangel_audio.c |
| 20:16.23 | *** join/#htc-linux TripleDES (n=sergio@89.129.187.133) |
| 20:20.39 | BabelO | cr2: sorry it is file named blueangel.c into directory sound/soc/pxa |
| 20:20.52 | *** join/#htc-linux Foxdie (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) |
| 20:23.29 | cr2 | ok. |
| 20:23.41 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.187.133) |
| 20:30.42 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.250) |
| 20:37.36 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 20:37.36 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
| 20:51.51 | cr2 | Kevin2: i have updated the hermes gpio list, and created the keyboard keycodes list. |
| 20:53.07 | cr2 | http://wiki.xda-developers.com/index.php?pagename=Hermes_KBD |
| 20:57.47 | goxboxlive | BabelO: I'm uploading the image now. It is suplied with openmoko-dialer and openmoko-messages (you have to open openmoko-messages before launch openmoko-dialer) |
| 20:58.03 | goxboxlive | It actually works bether with xqt. |
| 20:59.52 | *** join/#htc-linux cyrill62 (n=cyrill62@ble59-5-82-233-205-36.fbx.proxad.net) |
| 20:59.57 | BabelO | thanks goxboxlive, i use this image as my test image now |
| 21:01.06 | goxboxlive | I have also build a qvga theme for you if you want it |
| 21:01.33 | BabelO | yes, so all icone and component are resized ? |
| 21:02.35 | goxboxlive | I think they will, i havent tried it. I'll mail it to you. Just so you know, the imnage sisent upped yet, the transfer failed. I'll post you the link when it's done ( 2 min or so) |
| 21:03.37 | BabelO | ok thanks |
| 21:04.14 | goxboxlive | The qvga theme is mailed |
| 21:04.18 | goxboxlive | to you |
| 21:04.43 | cr2 | goxboxlive: we need to coordinate the qvga with pH5 |
| 21:04.45 | BabelO | got it thanks |
| 21:05.12 | goxboxlive | cr2: What do you mean? |
| 21:05.58 | goxboxlive | BabelO: Here is the link: http://gnulinux.biz/files//Universal/sd-mmc/snapshot/Opie/opie-custom-image-htcuniversal.tar.bz2 |
| 21:06.15 | goxboxlive | cr2 you bether try it out. Moko-dialer looks so good :-) |
| 21:06.48 | goxboxlive | I havent tried it out with a sim yet. I'll wait for my twin sim |
| 21:09.34 | goxboxlive | cr2: If you are going to try iy out you have to use the zImage in the cab file. It's a hh4 tag version. The you can try out my cab file too. You have to run linux from the secund partition on your SD as usual |
| 21:10.46 | cr2 | from the second. hmm. |
| 21:11.17 | goxboxlive | mmcblkp2 |
| 21:11.27 | cr2 | i've formatted the 2G card to have only 1 linux partition. |
| 21:12.01 | goxboxlive | iok, but its just to edit the startup.txt after you have installed the cab file |
| 21:12.27 | goxboxlive | startup.txt is located in \program files\BootLinux\startup.txt |
| 21:12.53 | cr2 | interesting. i don't have program files |
| 21:12.55 | goxboxlive | hmm the dialer work so great now, at least the gui part. Have to try with sim now |
| 21:13.06 | goxboxlive | yes you have in WinCe |
| 21:14.24 | cr2 | btw, universal/hermes/athena will probably have the same ak4641 setup. that's good. |
| 21:14.54 | goxboxlive | yes that realy great. |
| 21:16.19 | goxboxlive | oh man it's getting late again, an i have to go to work again tomorrow. But i have to try the phone part. |
| 21:21.05 | cr2 | you create \Program Files |
| 21:21.19 | goxboxlive | no it's there default |
| 21:21.32 | cr2 | only on the WWE |
| 21:22.18 | goxboxlive | ahhh |
| 21:22.24 | goxboxlive | of course |
| 21:22.30 | cr2 | i think mem=64M is not necessary |
| 21:22.33 | goxboxlive | i dint think of that |
| 21:22.38 | goxboxlive | ok |
| 21:22.56 | goxboxlive | yes the dialer works in opie |
| 21:23.21 | goxboxlive | also incomming |
| 21:23.24 | cr2 | my sim is locked. |
| 21:23.53 | goxboxlive | ok, hmm but it doesent hang up calls |
| 21:23.55 | RoEn_PC | goxboxlive: great |
| 21:26.03 | goxboxlive | <RoEn_PC> yes this is cool. You know where to get it. If you want the qvga theme to try out that also i can mail it to you |
| 21:26.29 | RoEn_PC | ok roen at sidux.com |
| 21:28.01 | RoEn_PC | i have opie 1.2 on htc, but i didnt find a dialer program |
| 21:28.50 | cr2 | goxboxlive: where is the openmoko-dialer source ? |
| 21:30.10 | goxboxlive | <RoEn_PC> There is no dialer program for Opie. I have installed xqt2 to run it. SO you have to start xqt before you launch messages and dialer |
| 21:30.17 | BabelO | cr2: here svn checkout http://svn.openmoko.org/ |
| 21:30.19 | goxboxlive | look at the log here and you find it out. |
| 21:30.55 | RoEn_PC | goxboxlive: thx :) |
| 21:30.57 | goxboxlive | But just remeber to run export DISPLAY=:0.0 before you run openmoko-messages and the dialer |
| 21:31.01 | goxboxlive | welcome |
| 21:33.14 | cr2 | it refers to "Master" and left/right channel. only. |
| 21:33.21 | goxboxlive | ok |
| 21:33.33 | cr2 | and uses 'long's in the code . this is evil. |
| 21:33.34 | goxboxlive | BabelO: Did you try out the qvga theme? |
| 21:33.40 | goxboxlive | ok |
| 21:34.13 | goxboxlive | But i dont understand why it's works bether with xqt2 than with openmoko/x11 on Universal |
| 21:34.15 | cr2 | goxboxlive: it's even more simple than gomunicator. |
| 21:34.22 | goxboxlive | ok |
| 21:34.39 | goxboxlive | Is there anything in there i can change to have it working with my mic? |
| 21:35.31 | cr2 | panic |
| 21:36.06 | cr2 | unable to set blocksize to 512 ??? |
| 21:36.24 | cr2 | it was working on the blueangel. |
| 21:36.45 | cr2 | hima had problems with /sbin/init, but this part was ok. |
| 21:37.21 | cr2 | Kevin's small haret font looks really funny on the universal. |
| 21:37.26 | goxboxlive | what are you talking aout cr2 |
| 21:37.36 | goxboxlive | yes, but they disapear in a second |
| 21:37.39 | cr2 | can't boot. |
| 21:38.14 | *** part/#htc-linux _law_ (n=_law_@213.173.86.202) |
| 21:38.33 | goxboxlive | use my kernel image |
| 21:38.48 | cr2 | add 'set kernelcrc 1' to default.txt |
| 21:38.57 | cr2 | i use your installer. |
| 21:39.05 | goxboxlive | i have just booted it from mmcblkp2 |
| 21:39.22 | goxboxlive | ok, it should work. Have you changes the startuo.txt? |
| 21:39.32 | cr2 | asic3 on the universal does not like my 2Gig SD card. |
| 21:39.43 | cr2 | says |
| 21:39.44 | goxboxlive | cr2: It should be idiot proof :-) |
| 21:39.50 | cr2 | unable to set blocksize to 512 |
| 21:40.20 | cr2 | but asic3 on blueangel is ok with it. |
| 21:41.27 | cr2 | i'll use old trusty 128MB card. |
| 21:41.36 | goxboxlive | yes you do that. |
| 21:41.51 | goxboxlive | Well it's getting late. Have to go. good night |
| 21:41.57 | cr2 | good night. |
| 21:43.02 | cr2 | BabelO: blueangel is the best :) |
| 21:46.51 | cr2 | the splash does not see that the screen is in landscape mode. |
| 21:47.39 | cr2 | opie is more smart. |
| 21:47.54 | cr2 | only the picture is stretched. |
| 21:49.00 | BabelO | yes cr2, i modify a little opie config to have a standard screen :) |
| 21:50.18 | cr2 | the picture is ugly. why is it not 640x480 ? |
| 21:50.33 | cr2 | i thought it should be, like on the zaurus. |
| 21:50.44 | cr2 | so, where is the moko dialer ? |
| 21:52.00 | cr2 | the keyboard layout is wrong. |
| 21:52.42 | cr2 | can#t open display ? |
| 21:52.55 | BabelO | where do you have all this problem ? |
| 21:58.35 | cr2 | dones not work |
| 21:58.47 | cr2 | how do i start the openmoko-dialer ? |
| 21:59.13 | BabelO | you have to start Xqt2 |
| 21:59.21 | BabelO | then openmoko-message |
| 21:59.28 | BabelO | and to finish openmoko-dialer |
| 21:59.48 | cr2 | from konsole ? |
| 21:59.56 | cr2 | ok. |
| 22:00.31 | BabelO | yes |
| 22:00.39 | BabelO | i start it over ssh |
| 22:00.59 | cr2 | the xcursor looks weird with the touchscreen :) |
| 22:01.45 | cr2 | hehehe. looks like shit in the landscape mode. |
| 22:02.24 | cr2 | but the graphics is cool. |
| 22:02.37 | BabelO | i m looking for setting display in standard mode for my ba |
| 22:02.41 | cr2 | with the universal's dpi, of course :) |
| 22:04.01 | BabelO | ok good my screen is ok know |
| 22:04.06 | BabelO | i have to start dialer |
| 22:04.10 | cr2 | rotated the screen, dialer did not get it of course. |
| 22:05.27 | BabelO | ok too big icon for me :) i have to install qvga theme know |
| 22:11.04 | cr2 | well, funny stuff. |
| 23:25.39 | Kevin2 | cr2: Still here? |
| 23:27.27 | pof | Kevin2: nice progress on hermes :) |
| 23:30.10 | Kevin2 | pof: Thanks. Looks like we've gotten over the biggest hurdle. |
| 23:45.41 | pof | yes :D |
| 23:49.07 | pof | i'll try to build zImage from hh.org cvs during this week |
