00:23.22 | lucificifus | Kevin2, get back to me when you can :) |
00:29.19 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
00:31.47 | gw280 | is the telephony stuff for Qtopia open source? |
01:20.12 | *** join/#htc-linux Hawk||- (n=Hawk@p57A5457E.dip0.t-ipconnect.de) |
01:31.33 | *** join/#htc-linux phongred (n=phongred@203.113.144.83) |
01:31.49 | phongred | good morning |
01:33.07 | *** join/#htc-linux psokolovsky (n=psokolov@232.usernat.ip.net.ua) |
01:35.18 | phongred | who can help me,i cant open USB port BlueAngel when boot LInux |
01:41.16 | *** join/#htc-linux psokolovsky_ (n=psokolov@232.usernat.ip.net.ua) |
01:52.36 | *** join/#htc-linux psokolovsky (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
02:00.17 | phongred | help |
02:04.07 | Kevin2 | lucificifus: No, I haven't seen that. When I got the phone I filed the welcome disc in the nearest trash can. See if the file helps figure out the messages found at: http://www.handhelds.org/moin/moin.cgi/ApachePhoneTrace |
02:05.07 | lucificifus | Kevin2, cool, I'll check it out. If they do make sense, how do we proceed forward? |
02:10.33 | lucificifus | Kevin2, what do you think that <cr> and <lf> could mean? I'm going to look up the winmodem docs :) |
02:11.41 | lucificifus | Kevin2, I looked it up, they seem to be notation for linebreaks |
02:12.31 | jjazz | lucificifus: cr is carriage return, lf is linefeed |
02:12.35 | lucificifus | kk |
02:12.55 | lucificifus | Kevin2, jjazz: I found Direct Correlation between the INF file and the Haret logs |
02:13.02 | lucificifus | from the hangup: write: 'ATH\r' |
02:13.07 | lucificifus | from the INF |
02:13.11 | lucificifus | HKR,Hangup,1,,"ATH<cr>" |
02:13.46 | lucificifus | if anyone wants a look, I can upload it to my server |
02:15.03 | jjazz | lucificifus: <cr> is \n or ascii 0D. |
02:15.26 | lucificifus | and <LF> is \r ? |
02:16.15 | jjazz | lucificifus: I don't remember. It's ascii 0A, though. |
02:16.25 | lucificifus | k :) |
02:17.47 | lucificifus | yeah, I can find matches in the INF and in the traces :) |
02:17.51 | lucificifus | cool :D |
02:17.53 | jjazz | cool |
02:20.15 | Kevin2 | lucificifus: Neat, can you push the file somewhere? |
02:20.26 | lucificifus | yup :) on the upload now |
02:21.18 | lucificifus | http://ev01v.com/CDMA%20USB%20Modem.INF |
02:28.21 | lucificifus | Kevin2, finding anything interesting? How does one go about compiling a linux modem driver? |
02:29.02 | *** join/#htc-linux meron (n=meron@p50867D55.dip.t-dialin.net) |
02:34.23 | Kevin2 | lucificifus: I wont be able to look at it tonight. The real stuff that is a mystery is the "Turn on phone" section. It sends a whole bunch of big binary blocks to/from the modem. |
02:34.33 | lucificifus | oh, I see |
02:34.56 | lucificifus | yeah, that will be difficult |
02:35.16 | lucificifus | Kevin2, how do I ssh into my device? 192.168.0.206 isn't responding to ping or ssh |
02:36.22 | *** join/#htc-linux maniacxs (n=maniacxs@pD9547058.dip0.t-ipconnect.de) |
02:38.30 | *** join/#htc-linux logan (n=logan@108.Red-83-55-49.dynamicIP.rima-tde.net) |
02:41.52 | *** join/#htc-linux connorp_ (n=connorp@c-67-190-8-41.hsd1.co.comcast.net) |
02:43.37 | Kevin2 | lucificifus: Are you running one of the familiar images? |
02:43.45 | connorp_ | yes, the one off of your site :) |
02:43.56 | connorp_ | well, the image off your site, I'm not sure if its a familiar image |
02:44.09 | connorp_ | bootstrap-image-v0.8.4-h2200.rootfs.tar.bz2 |
02:44.44 | Kevin2 | Run "ifconfig" on the phone and see if it shows a usb0 interface. |
02:45.05 | Kevin2 | I modify /mnt/tmp/etc/network/interfaces and add a line that says "auto usb0" to bring up the interface automatically. |
02:45.24 | Kevin2 | It should try to use 192.168.0.202 by default. |
02:46.10 | Kevin2 | I bring my host up as 192.168.0.200. You'll need to run "ifconfig usb0 192.168.0.200" on your host. |
03:01.33 | ellisway | mm as a note the at strings found in the modem.inf file from lucificifus`s link are the same at commands used for the modem in the universal |
03:01.50 | connorp_ | ooh interesting :D |
03:02.09 | connorp_ | thanks Kevin2 trying out the "auto usb0" now |
03:02.17 | ellisway | i no because i use the same inf file to access the wireless modem on my universal to use the 3g serices |
03:03.09 | ellisway | gonna do a diff between lucificifus`s link the file i ave and the file from the original cd |
03:04.38 | lucificifus | :) |
03:05.05 | lucificifus | Kevin2, whats the default root pw for that image you have? |
03:07.15 | phongred | lucificifus <== you can send to me driver telnet BlueAngel thanks |
03:08.42 | ellisway | ok minimal difference`s between lucificifus`s file and the 1 i use |
03:08.52 | ellisway | diff -u CDMA\ USB\ Modem.INF USBMDM.INF |
03:08.52 | ellisway | --- CDMA USB Modem.INF 2007-01-12 02:22:58.000000000 +0000 |
03:08.52 | ellisway | +++ USBMDM.INF 2003-01-30 08:12:42.000000000 +0000 |
03:08.52 | ellisway | @@ -79,7 +79,7 @@ |
03:08.53 | ellisway | <PROTECTED> |
03:08.53 | ellisway | <PROTECTED> |
03:08.55 | ellisway | <PROTECTED> |
03:08.57 | ellisway | -USB\VID_0BB4&PID_00CF.DeviceDesc = "CDMA USB Modem" |
03:08.59 | ellisway | +USB\VID_0BB4&PID_00CF.DeviceDesc = "HTC USB Modem" |
03:09.01 | ellisway | <PROTECTED> |
03:09.03 | ellisway | <PROTECTED> |
03:09.16 | ellisway | but thefile on the cd looks different to both |
03:09.27 | ellisway | contains lots more comments |
03:09.45 | lucificifus | strainge |
03:09.48 | lucificifus | *strange |
03:10.53 | ellisway | damn loads of diff`s |
03:11.12 | ellisway | gonna put the 2 files i have online if any1 wants to have a look at them |
03:13.49 | phongred | help me |
03:13.55 | phongred | help me please |
03:14.16 | lucificifus | phongred, what are you trying to do specifically? |
03:14.25 | phongred | <PROTECTED> |
03:14.38 | phongred | and startup.txt file |
03:15.05 | phongred | when i run haret PC cant add new hardware |
03:15.22 | lucificifus | phongred, are you running haret from your BlueAngel? |
03:15.32 | phongred | yes |
03:15.34 | lucificifus | oh, I think I know what you mean |
03:15.37 | Kevin2 | lucificifus: It asks for a new password the first time you boot. Otherwise, search the familiar docs for the password. |
03:16.12 | lucificifus | phongred, I'm using the standard linux client to ssh in |
03:16.25 | lucificifus | phongred, what OS is your host computer running? |
03:16.27 | phongred | iusing blueangel wm2005 |
03:16.33 | phongred | windows XP |
03:16.41 | lucificifus | phongred, try PuTTY |
03:16.49 | lucificifus | http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html |
03:16.59 | ellisway | http://phukd.good1.com/temp/USBMDM.INF |
03:17.05 | ellisway | http://phukd.good1.com/temp/CD-USBMDM.INF |
03:17.23 | lucificifus | Kevin2, I was never promted for a password :( and "rootme" doesn't seem to work. Weird. can I chroot into the SD card and do "passwd?" |
03:17.34 | phongred | thanks |
03:17.38 | lucificifus | sure phongred :) |
03:18.10 | lucificifus | oh, Kevin2, do you think adding an entry into authorized_keys would work? |
03:18.31 | ellisway | lucificifus the cdma inf u linked is that from the cd for your handset ? |
03:18.46 | lucificifus | ellisway, yes, it is. For Verizon Wireless |
03:18.53 | ellisway | k |
03:19.08 | phongred | my problem: when click haret-0.3.8.exe on PPC,boot linux but PC cant add new hardware, i think startup.txt not support USB port |
03:19.23 | ellisway | the 1 i pasted the diff against is 1 that i downloaded from xda-developers site |
03:19.50 | ellisway | but seems to be for the same vendor id and device id |
03:19.56 | lucificifus | phongred, try this howto: http://docwiki.gumstix.org/Windows_XP_usbnet & http://www.davehylands.com/linux/gumstix/usbnet/ |
03:20.14 | lucificifus | all you need to do is set up the INF. good luck, I haven't done it before :D |
03:20.48 | phongred | thanks |
03:21.10 | lucificifus | no problem, sir :) |
03:21.43 | phongred | putty <== what file? |
03:22.11 | phongred | :D |
03:22.55 | lucificifus | :D http://the.earth.li/~sgtatham/putty/latest/x86/putty-0.58-installer.exe |
03:23.46 | phongred | but what it? |
03:23.57 | phongred | sorry my english heheeeee |
03:24.18 | ellisway | diff between lucificifus`s version and mine http://phukd.good1.com/temp/USBMDM.INF.DIFF |
03:25.07 | lucificifus | phongred, execute Start > PuTTY > PuTTY :) |
03:26.03 | lucificifus | ellisway, doesn't the Universal have working GSM? |
03:26.05 | lucificifus | in Linux, that is |
03:26.29 | ellisway | gsm yes |
03:26.53 | ellisway | but the inf file is about the modem |
03:27.03 | lucificifus | true |
03:27.12 | ellisway | how to set it for doing data rather than just the gsm |
03:27.35 | ellisway | i might be able to help a bit with the data side of things as i have data in my contract |
03:27.50 | lucificifus | yea, I actually have a data-only contract atm :D |
03:28.01 | ellisway | :) |
03:28.02 | lucificifus | phongred, where are you from? :) |
03:28.10 | phongred | vietnam |
03:28.17 | phongred | i' from vietnam |
03:28.18 | phongred | lol |
03:28.29 | lucificifus | cool :) I'm from the US |
03:28.33 | ellisway | i`m from irc |
03:28.35 | phongred | oh hehe |
03:28.38 | lucificifus | hehe :P |
03:28.39 | ellisway | :) |
03:28.54 | ellisway | uk :) |
03:29.10 | phongred | but my companyof Sparton corporation |
03:29.34 | phongred | florida Spaton |
03:29.50 | lucificifus | hehe cool :) |
03:29.52 | phongred | Sparton |
03:29.57 | phongred | you know |
03:29.59 | phongred | ? |
03:30.01 | phongred | lol |
03:30.37 | Kevin2 | lucificifus: authorized keys should work. I don't think "passwd" will work -- different archs. You should be able to edit /etc/shadow though. |
03:30.49 | lucificifus | kk :) trying auth keys now |
03:31.22 | lucificifus | gah, didnt do it right |
03:32.37 | lucificifus | Kevin2, where is dropbear's config file? |
03:34.21 | phongred | lucificifus => i download INF file anh change String USB\VID_045E&PID_0301 (my ID) |
03:34.52 | phongred | but PC cant ADD hardware i think Startup file of Linux problem |
03:35.03 | phongred | what do you think? |
03:35.47 | lucificifus | phongred, I'm not sure about that. Try booting up on an Ubuntu (or Knoppix) live CD and following the instructions for linux? |
03:36.32 | phongred | you want me boot PC by Linux? |
03:36.44 | lucificifus | right, using a LiveCD. that might work better than using windows :) |
03:37.23 | phongred | i think so. i have LiveCD |
03:37.25 | phongred | lol |
03:38.10 | lucificifus | Kevin2, my install doesn't have an etc/shadow! thats prolly why it wasn't working |
03:38.11 | phongred | now you halp me again, begin to end.? |
03:38.15 | lucificifus | phongred, sure :) |
03:38.19 | phongred | lol |
03:38.19 | phongred | thanks |
03:38.23 | lucificifus | no problem :D |
03:39.11 | phongred | 1.download file Linux. copy to PPC, Run Haret.exe |
03:39.42 | phongred | i dont know i can format Storage card by PC? |
03:39.58 | phongred | you know? |
03:40.18 | lucificifus | in linux, just use fdisk :) |
03:40.40 | phongred | oh can format by PC,realy? |
03:40.44 | phongred | lol |
03:41.01 | lucificifus | yeah :) that's how I did it :D |
03:42.01 | phongred | after format create partiton 1Fat + 1 EXT2 |
03:42.25 | phongred | copy all file to storage card |
03:42.36 | lucificifus | yes |
03:43.11 | phongred | ,oh step telnet or connect PC to PPC<== no need? |
03:43.44 | *** join/#htc-linux tudenbart (n=willi@xdsl-213-196-227-245.netcologne.de) |
03:44.13 | phongred | only format, create partion, copy all file to storage card, run haret |
03:44.19 | lucificifus | thats right |
03:44.27 | phongred | oh lol |
03:44.49 | phongred | because i dont use Linux, I cant setup Linux ehehe |
03:44.56 | phongred | you good friend |
03:44.57 | phongred | thanks |
03:45.21 | phongred | :D :D :D :D |
03:45.36 | lucificifus | no problem :D so have you booted the livecd? |
03:45.57 | phongred | <-_-> |
03:46.46 | phongred | ([-_-]) |
03:48.07 | phongred | lucificifus <== no nedd setup driver and connect Pc To PPC <== you Sure heheehehe |
03:48.48 | lucificifus | linux should already have a driver, so just plug in the usb :) |
03:50.06 | phongred | no no when i boot linux? |
03:50.44 | phongred | tonight i will check again lol |
03:51.01 | lucificifus | hehe allright, I have to go for now, I'll be back later. good luck! |
05:07.08 | *** join/#htc-linux RoEn_PC (n=roen@p54A67096.dip.t-dialin.net) |
05:12.37 | *** join/#htc-linux meron (n=meron@p508672D7.dip.t-dialin.net) |
05:40.29 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
05:48.09 | phongred | alo' |
06:13.09 | *** join/#htc-linux cableroy_ (n=cableroy@212.33.147.59) |
06:47.16 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
06:50.16 | gxl|work | good morning |
07:01.54 | kimuSan^ | morning |
07:02.38 | Hymie | damn, almost split my sides watching the latest kenny vs spenny |
07:03.35 | *** join/#htc-linux DeadlyNinja (n=Anonymou@c-69-139-218-205.hsd1.az.comcast.net) |
07:03.52 | DeadlyNinja | i ran the xda-developer's unlock program but my phone appears to still be locked |
07:04.19 | DeadlyNinja | can a sim card be locked? |
07:05.10 | Hymie | you can, I believe, have a code for the sim card, but that makes little sense |
07:05.33 | Hymie | the whole point of locking is to prevent you from signing up to a contract, and then switching cell phone companies |
07:05.38 | Hymie | the sim card won't prevent that |
07:05.39 | Hymie | and |
07:05.49 | Hymie | how could you still hgave the old sim card, if you're trying a new? ;) |
07:07.38 | DeadlyNinja | i have 2 sims |
07:07.43 | DeadlyNinja | the old one has no warning |
07:08.00 | DeadlyNinja | the new one (a t-mobie prepaid) comes up with an unlock screen |
07:08.08 | DeadlyNinja | this is after ive ran the unlocker |
07:08.37 | Hymie | my point above was, why would companies ever lock their sim? |
07:08.46 | Hymie | if you're leaving them, you don't have their sim |
07:09.01 | Hymie | if you're putting their sim in another phone, you're going to use their service and pay, and that's a good thing |
07:09.02 | Hymie | so no |
07:09.12 | Hymie | I doubt there is a code locking the sim |
07:09.19 | DeadlyNinja | hm |
07:09.21 | Hymie | and, is it asking for a code, or what?/ |
07:09.24 | Hymie | what provider? |
07:09.30 | Hymie | what does the screen say, precisely? |
07:11.12 | *** join/#htc-linux gxl|work (n=goxboxli@195.159.97.196) |
07:11.12 | *** join/#htc-linux cableroy_ (n=cableroy@212.33.147.59) [NETSPLIT VICTIM] |
07:11.12 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) [NETSPLIT VICTIM] |
07:11.25 | DeadlyNinja | ill upload a picture |
07:11.26 | DeadlyNinja | its a cingular phone, t-mobile card |
07:11.26 | DeadlyNinja | sx66 blueangel |
07:11.59 | DeadlyNinja | "Network is locked, Please input unlock code" |
07:12.26 | Hymie | hmm |
07:12.56 | Hymie | I don't know how a locked WM5 phone reacts, I've only unlocked palm devices.. and for me, the card just wouldn't work... |
07:13.15 | Hymie | usually there isn't an unlock code, because then someone could put that on the internet, and everyone would be able to use it |
07:13.16 | Hymie | sec |
07:13.17 | DeadlyNinja | its WM2003 |
07:13.27 | DeadlyNinja | i havnt touched it |
07:13.31 | DeadlyNinja | its a stock phone as far as i know |
07:13.44 | DeadlyNinja | ive had it for 26 hours |
07:13.49 | DeadlyNinja | err 36 |
07:14.49 | Hymie | hum, well.. I don't know what to suggest, except wait until tomorrow.. most people are (all people? ;) asleep now |
07:15.02 | Hymie | but again |
07:15.08 | Hymie | I can't see why the sim card would be locked |
07:15.11 | Hymie | it's likely the phone |
07:15.35 | DeadlyNinja | is this the correct file to use to unlock? http://forum.xda-developers.com/files/xdadev_all_unlock-v1.6.exe |
07:15.57 | Hymie | http://72.14.205.104/search?q=cache:D6jDbfT5AUIJ:www.filesaveas.com/tmobile.html+t-mobile+sim+card+code&hl=en&gl=ca&ct=clnk&cd=1 |
07:16.00 | Hymie | I don't know :( |
07:16.04 | Hymie | I have a HTC Hermes |
07:16.49 | Hymie | What is my SIM card PIN? The number is printed on the delivery slip that comes with your SIM card. If in doubt, try T-Mobile's default PIN code for SIM cards, which is 1210. Note that you get three tries to enter the PIN, and your phone will be locked if you fail after these tries. You'll then need to contact T-Mobile to get a PUK code (see below). |
07:18.48 | DeadlyNinja | oh man i guess i have one try left then |
07:19.08 | DeadlyNinja | http://www.deadlyninja.com/img/locked2.jpg |
07:19.12 | Hymie | if it is indeed the pin.. do you have that slip of paper? if not, call t-mobile I guess |
07:19.26 | Hymie | ah, simlock |
07:19.27 | Hymie | anyhow |
07:19.35 | Hymie | t-mobile wants you to use their phone |
07:19.37 | Hymie | so.... |
07:19.42 | Hymie | they'll be happy to co-operate |
07:20.03 | Hymie | er |
07:20.08 | Hymie | their network, I mean ;) |
07:21.43 | DeadlyNinja | well i dunno where the pin is |
07:21.54 | DeadlyNinja | but thanks, thats gotta be what it is |
07:22.02 | Hymie | silly t-mobile |
07:22.04 | DeadlyNinja | although i dont understand that myself |
07:22.15 | Hymie | they probably think it helps if someone steals your sim card |
07:22.21 | Hymie | but, I think they'll take the whole phone ;) |
07:24.59 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
07:31.20 | DeadlyNinja | this is how i would do it: break into your car, grab your phone, open it up, sneak the sim card out, then close the phone, glue your windshield closed and run off |
07:31.35 | Hymie | heh |
07:39.59 | phongred | alo |
07:40.13 | phongred | alo-ola lol |
08:03.12 | *** join/#htc-linux anYc_ (i=mario@hadince17.hadiko.uni-karlsruhe.de) |
08:03.28 | *** join/#htc-linux Fossi (n=cmewes@195.177.48.115) |
08:29.06 | *** part/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
08:41.03 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
08:45.46 | *** join/#htc-linux pH5 (n=ph5@e178206241.adsl.alicedsl.de) |
09:14.22 | *** join/#htc-linux rob_w (n=rob_w@p549B99FA.dip0.t-ipconnect.de) |
09:18.03 | *** join/#htc-linux pH5 (n=ph5@e178206241.adsl.alicedsl.de) |
09:23.57 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
09:33.30 | *** join/#htc-linux BabelO (n=m293@faim1.itesoft.com) |
09:49.14 | *** join/#htc-linux rejon (n=rejon@202.39.243.251) |
09:49.31 | *** part/#htc-linux rejon (n=rejon@202.39.243.251) |
10:50.31 | *** join/#htc-linux LunohoD_ (n=alex@e180082182.adsl.alicedsl.de) |
11:14.52 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
11:34.38 | *** join/#htc-linux VisN (n=VisualN@ip227.131.adsl.wplus.ru) |
11:38.21 | rob_w | can someone hint me how to identify correct hsync vsync pxlclk for a new tft ? |
11:49.16 | kimuSan^ | probe it? |
11:49.26 | kimuSan^ | or look at the sticker on the back |
11:50.30 | rob_w | ? |
11:50.37 | rob_w | no sticker |
11:51.28 | kimuSan^ | X -configure |
11:51.33 | kimuSan^ | IIRC |
11:51.44 | kimuSan^ | probes for vendor settings |
12:00.58 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
12:19.40 | *** join/#htc-linux RoEn_PC (n=roen@p54A67096.dip.t-dialin.net) |
12:34.44 | *** join/#htc-linux bd2 (n=ufo@89.113.84.151) |
12:37.00 | *** join/#htc-linux maniacxs_ (n=none@argentum.uni-paderborn.de) |
12:57.44 | *** join/#htc-linux Tjikkun_ (n=tjikkun@ip5451133d.direct-adsl.nl) |
13:09.51 | *** join/#htc-linux psokolovsky (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
13:12.41 | *** join/#htc-linux VisN (n=VisualN@ip227.131.adsl.wplus.ru) |
13:26.44 | *** join/#htc-linux rejon (n=rejon@140.109.175.228) |
13:27.07 | *** part/#htc-linux rejon (n=rejon@140.109.175.228) |
13:36.55 | *** join/#htc-linux pandabear (n=Heya@i59F75EBD.versanet.de) |
13:37.27 | pandabear | hello |
13:37.48 | pandabear | I've got a problem with the latest magician linux image |
13:38.21 | pandabear | Angstrom-gpe-image-test-20070111-magician.rootfs.tar.bz2 doesn't unpack cleanly, says EOF in the middle of the unpacking ... |
13:38.33 | pandabear | so who can i write to about this ? |
13:40.16 | *** part/#htc-linux yacc (n=andreas@h1634.serverkompetenz.net) |
13:54.22 | *** join/#htc-linux gw280 (n=george@vm.gwright.org.uk) |
14:04.32 | *** join/#htc-linux hlbot (n=adm@82.67.76.179) |
14:26.44 | *** join/#htc-linux silven (n=zmc@66.50.158.30) |
14:56.56 | *** join/#htc-linux josh11 (i=josh@host86-129-118-193.range86-129.btcentralplus.com) |
14:57.16 | josh11 | hi is anyone here? |
15:00.56 | pandabear | me |
15:01.22 | josh11 | hi there:) |
15:01.33 | josh11 | i was wondering if u can help |
15:01.33 | pandabear | but i got no clue about the project =P |
15:01.40 | pandabear | i doubt it =( |
15:01.47 | josh11 | what about the pda devices? |
15:01.50 | pandabear | i am also here for a helpng hand |
15:02.09 | josh11 | i basically deleted my bootloader of my device and now i cant flash it |
15:02.09 | *** part/#htc-linux BabelO (n=m293@faim1.itesoft.com) |
15:03.30 | pandabear | how did you delete your bootloader ? |
15:03.32 | pandabear | di |
15:03.50 | pandabear | did you write something into the flashMEMORY of your device ? |
15:03.52 | pandabear | uppale |
15:04.02 | pandabear | memory supposed to be small =) |
15:04.11 | josh11 | iwas trying to upgrade the the pda with a sdcard carrying the rom |
15:04.23 | josh11 | but it failed and now my pda is dead:( |
15:04.32 | pandabear | that should be perfect |
15:04.38 | pandabear | you need to hardreset it |
15:04.42 | josh11 | its a px10a model wallavy |
15:04.47 | josh11 | wallaby |
15:04.54 | josh11 | mate when i reset nothing happen |
15:05.09 | pandabear | hrm, oh, now i get it |
15:05.10 | josh11 | the bootloader is gone |
15:05.18 | pandabear | thought you were just booting the image on the sdcard |
15:05.33 | josh11 | i was trying to upload it to the device yes |
15:05.38 | *** join/#htc-linux BobOfDoo1 (i=ato@210-9-136-240.netspeed.com.au) |
15:06.07 | pandabear | well, I am sorry, but as far as I know there is no way to get it running again when the bootloader has been crushed |
15:06.21 | josh11 | when i plug in the device ,,all i get in device manager is htx usb sync |
15:06.31 | josh11 | htc usb sync when i plug it on comp |
15:06.35 | josh11 | so there must be a way |
15:06.49 | pandabear | hrmm, when the usb port is running it must have loaded something |
15:07.21 | pandabear | well I am sorry, I don't got any clue myself =( |
15:07.39 | josh11 | well i hope someone can help on this matter because it was running perfect until i done flashing |
15:07.50 | josh11 | thanks panda for your time |
15:09.13 | *** join/#htc-linux BabelO (n=m293@faim1.itesoft.com) |
15:12.54 | BabelO | cr2 : i say something wrong, Qtopia SXE is Safe Execution Environment... a security system |
15:17.17 | *** join/#htc-linux silven (n=zmc@66.50.158.30) |
15:31.28 | RoEn | re |
15:38.53 | pandabear | heya toen, you know who maintains the magician linux port ? |
15:39.02 | pandabear | gah, roen .. |
15:40.27 | pandabear | RoEn: you know who maintains the magician linux port ? |
15:51.16 | *** join/#htc-linux lkcl_ (n=lkcl@5ac68165.bb.sky.com) |
15:55.51 | *** join/#htc-linux Ralith (n=ralith@66.150.12.86) |
16:02.57 | RoEn | pandabear: sry, noo |
16:03.27 | BabelO | pandabear : ask pH5 for magician |
16:05.01 | josh11 | babel who can i speak to about the wallaby device? |
16:05.39 | pandabear | great thanks |
16:06.30 | *** join/#htc-linux tudenbart (n=willi@xdsl-213-196-242-240.netcologne.de) |
16:08.47 | BabelO | josh11 : : sorry i don't know for this one |
16:10.37 | josh11 | ok ill stickaround :) |
16:11.23 | cr2 | BabelO: SXE is something like java ? then we can certainly live without it :) |
16:11.40 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.201.3) |
16:12.15 | cr2 | josh11: you have wallaby ? |
16:12.37 | josh11 | yep |
16:12.41 | josh11 | px10a model |
16:12.45 | cr2 | is it working ? |
16:12.50 | cr2 | i mean wince. |
16:12.56 | josh11 | yes but i deleted the bootloader |
16:13.04 | cr2 | hmm. |
16:13.05 | josh11 | so its only a boot screen |
16:13.13 | josh11 | and i cant acces the bootloader to fix it |
16:13.22 | cr2 | if you have a bootscreen, then the bootloader is there. |
16:13.48 | josh11 | no i meant the rom bootscreen |
16:13.50 | cr2 | if the bootloader is really deleted, then you can't really do anything without jtag. |
16:13.52 | josh11 | it says win2003 |
16:14.02 | josh11 | oh no pls dont tell me jtag:) |
16:14.04 | josh11 | :( |
16:14.05 | josh11 | pls |
16:14.09 | josh11 | there must be a way |
16:14.20 | cr2 | what do you have on the screen ? |
16:15.00 | josh11 | i flahsed it with a rom from xda developers ,,,a win2003 rom when i done it the bootloader dissapeared and now i get a message sayin |
16:15.26 | josh11 | this is a microsoft internal product for microsoft employeess |
16:15.34 | josh11 | pls contact microsoft crap |
16:15.45 | josh11 | and when ido hard reset no bootloader |
16:15.50 | *** join/#htc-linux rejon (n=rejon@140.109.175.228) |
16:16.30 | cr2 | but you have a lot of running software, if you can see such message. |
16:16.32 | *** part/#htc-linux rejon (n=rejon@140.109.175.228) |
16:16.41 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.139.6) |
16:16.50 | cr2 | the deleted bootloader means the device is not doing anything. |
16:16.54 | BabelO | cr2 : yes, sure. i m looking at this for this evening http://doc.trolltech.com/qtopia4.2/themed-views.html and trying this http://doc.trolltech.com/qtopia4.2/syscust-theming.html and we can have a full phone build in :) i m updating my code |
16:17.21 | josh11 | ok when i plug it in the usb cradle in device manager i see htc usb sync |
16:17.24 | cr2 | BabelO: did you get any response from martin-s ? |
16:17.37 | cr2 | josh11: lsusb ? |
16:17.49 | josh11 | yes usb |
16:18.17 | cr2 | i mean, can you connect to it over USB-serial ? |
16:18.40 | josh11 | yes it comes up in device manager only as a htc usb sync |
16:18.41 | BabelO | cr2 : no, maybe i have to send another mail from gmail, i ve strange effect using Outlook at work |
16:18.50 | josh11 | but i cant acces it via active sync |
16:19.11 | cr2 | josh11: mtty.exe ? |
16:19.58 | josh11 | would that be possible with a usb lead or do i need a serial lead? |
16:19.59 | cr2 | i think usb is ok. |
16:20.15 | josh11 | ok but dont i need to enter bootloader usb mode ?? for mtty ? |
16:20.48 | josh11 | cr2 thanks so much for your time your perfect mate u no what your doing :) |
16:21.12 | josh11 | as i cant get in bootloader will mtty work u think ? |
16:22.26 | cr2 | mtty is for the bootloader mode anyway, because activesync is the full IP access. |
16:24.05 | josh11 | ok it aint accsesing it |
16:25.07 | josh11 | i selected usb in mtty |
16:25.27 | cr2 | well, try to read the wiki.xda-developers.com |
16:26.00 | josh11 | lol ive read everysingle page ,,,and they also said mtty ,,and another tool called xdairit |
16:26.04 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
16:26.31 | cr2 | it's nothing more than a serial terminal. |
16:26.44 | cr2 | over usb-serial or real rs-232 line. |
16:27.32 | josh11 | when i done a google search on htc usb sync i came up with a treo pda windows mobile and thats a htc service mode when it enters htc usb sync i read |
16:27.43 | cr2 | is it possible to do an update from the SD card ? |
16:28.01 | cr2 | it's only the naming. the usb function is not different. |
16:28.23 | cr2 | can you lookup the numbers in the registry ? |
16:28.23 | josh11 | i wish i could cr2 but when i put in the card on device with rom image cooked nothing doesnt even detect the card agaun no bootloader so thats why |
16:28.46 | cr2 | ok. |
16:29.09 | josh11 | i wish i left it alone |
16:29.14 | josh11 | it was running so nice |
16:29.19 | cr2 | :) |
16:29.33 | josh11 | i also have a blueangel that never gives me probs |
16:29.40 | josh11 | i flashed it so many times |
16:30.06 | cr2 | blueangel is more advanced, and more simple in respect to the bootloader. |
16:30.23 | josh11 | cr2 is there any special htc software for this bud? |
16:30.30 | josh11 | for my problem |
16:30.40 | cr2 | i have a ba, but not a wallaby. |
16:30.52 | cr2 | don't think so. |
16:31.07 | cr2 | maybe at HTC itself. |
16:31.45 | josh11 | because a pda repair shop i spoke to them and there saying they can fix this for a mere 35 pounds ,,,and i,m very sure they are gonna do jtag for that price |
16:31.52 | josh11 | so there is a trick for this:) |
16:32.12 | josh11 | they are not gonna do* |
16:33.33 | josh11 | cr2 thanks so much for your time:) |
16:34.27 | rmoravcik | cr2: hi |
16:36.19 | cr2 | josh11: that's the easiest thing for them to do. |
16:36.47 | cr2 | rmoravcik: hi. can you boot rx3715 with the latest haret ? |
16:36.52 | rmoravcik | cr2: if you will have a little bit free time, can you commit my rx3715 update http://www.handhelds.org/hypermail/kernel-discuss/current/2638.html |
16:37.29 | cr2 | sure. |
16:38.18 | rmoravcik | cr2: i don't try latest haret with rx3715, but i can try it, but right now building angstrom |
16:38.58 | josh11 | is the jtag procedure the best method for my problem ?? |
16:39.00 | cr2 | ok. |
16:39.20 | cr2 | josh11: the most logical for a repair shop. |
16:39.45 | josh11 | i,m scared they might destroy the cpu while removing it |
16:41.08 | josh11 | cr2 do u no what tool they use to remove the cpu ? |
16:41.19 | cr2 | remove the cpu ?? |
16:41.50 | cr2 | they only need to attach the wires to the jtag pads. |
16:42.04 | josh11 | yes but aent they under the cpu ? |
16:42.10 | cr2 | are the pad locations known for wallaby ? |
16:42.11 | josh11 | u need to remove cpu to get to it? |
16:42.38 | cr2 | i 've seen then documented only for himalaya and one ipaq. |
16:43.13 | cr2 | seems very strange if they are under the cpu ;-) |
16:43.13 | josh11 | ok if i dont have to remove cpu i can jtag myself i just gotta find out what lead to get |
16:43.22 | cr2 | is it in wiki ? |
16:43.53 | josh11 | http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG |
16:43.55 | cr2 | http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG |
16:43.57 | cr2 | yes. |
16:44.45 | cr2 | but the pads are not under the cpu! |
16:45.02 | cr2 | they removed the cpu just for fun i guess :) |
16:45.39 | josh11 | lol they cooked the pcb:) |
16:45.44 | josh11 | what a waste:) |
16:47.18 | cr2 | and to track the wiring. |
16:47.49 | josh11 | ok then i need the cable for pc and software:S |
16:48.14 | cr2 | the process is documented quite nicely. |
16:49.33 | josh11 | cr2 :) if u was in my trainers would u 1 take it shop pay 35 pounds let them do it ,,or 2 take on the challenge and do ti yourself:D |
16:52.11 | cr2 | i'll try to do it myself. but i'm a hardcore hacker :) |
16:52.29 | josh11 | http://toolbox.xilinx.com/docsan/3_1i/data/common/hug/figures/fig013.htm |
16:52.33 | josh11 | found diagram:D |
16:53.43 | cr2 | i think repairing such an old device for 35 pounds would be an offence to me. i'll better throw it away if i'll break it. |
16:53.59 | josh11 | http://www.altera.com/support/software/drivers/dri-quartus.html << software for jtag |
16:54.15 | josh11 | it has a better sound chip than a blueangel :) |
16:54.26 | cr2 | really ? |
16:54.43 | josh11 | yep it more powerful tha newer pda;s |
16:54.48 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
16:55.22 | josh11 | the only pda with same sound quality was spv m1000 |
16:56.53 | josh11 | cr2 can i add u on my msn ??:) |
16:57.27 | cr2 | what is msn ? |
16:57.39 | josh11 | msn messenger |
16:59.49 | *** join/#htc-linux rob_w (n=bob@p85.212.176.193.tisdip.tiscali.de) |
17:00.33 | psokolovsky | rmoravcik, can you please also submit defconfig for OE to use? |
17:01.25 | rmoravcik | psokolovsky: for 2.6.19-hh8? |
17:01.51 | josh11 | crs thanks again for all your help |
17:01.56 | rob_w | psokolovsky, today i was trying to get a new tft to a devel pxa270 .. but couldnt figure out settings so the picture blurry and wrong coloured |
17:02.07 | psokolovsky | rmoravcik, for whatever version you consider stable enough to build anstrom with ;-) I guess yes, the latest ;-) |
17:02.28 | psokolovsky | rob_w, how can I help? ;-) |
17:02.42 | rob_w | dunnknow .. |
17:03.30 | rob_w | maybe some tell me : are the timinngs also responsible for the correct colours ? |
17:03.46 | rob_w | i was trying to change the colour via fbset -rgba but it never chnaged |
17:03.54 | psokolovsky | rob_w, do you still work/have access to/interest in htchimalaya? |
17:04.07 | rob_w | i never had a hima |
17:04.17 | rmoravcik | psokolovsky: i have some updates to asic3 yet, that add support s3c24xx clock support, because s3c24xx clk struct has little bit diffrent members |
17:04.23 | psokolovsky | rob_w, sorry, I'm not hardware guy, dunno what could be involved... |
17:05.03 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
17:05.35 | psokolovsky | rob_w, umm, I believe I saw you (c) in the code, and you submitted machie config for it to OE? |
17:06.04 | rob_w | well , hima shares the tsc2200 chip with the blueangel |
17:06.19 | psokolovsky | rmoravcik, hmm. that all clk stuff is pretty weird. please post, of course |
17:06.23 | rob_w | also the bluenagel stuff was heavily derived by the existing himalaya code |
17:06.46 | psokolovsky | rob_w, yes, exactly, and it would be nice to update hima code to the latest soc driver, like BA |
17:06.53 | cr2 | josh11: i don't use im. and microsoft too. |
17:07.03 | rob_w | cr2, you do ! |
17:07.14 | cr2 | psokolovsky: lkcl is the only one with himalaya. |
17:07.27 | rob_w | psokolovsky, well the devices live or die with their users , |
17:07.31 | josh11 | ok icq? |
17:07.36 | psokolovsky | cr2, ok ;-) |
17:07.44 | cr2 | rob_w: how do you define the palette ? |
17:07.46 | rob_w | in the beginning there much more hima people here |
17:08.11 | rob_w | cr2, i dont expicitly afaik |
17:08.22 | cr2 | psokolovsky: once the uda1380 will finally work on ba, we can consider himalaya. |
17:08.37 | psokolovsky | rob_w, that's not sustainable approach. we should head towards general maintenance of all ports, and this of course requires common codebase and following common coding, etc standards |
17:08.49 | psokolovsky | cr2, ok, nice |
17:09.01 | rob_w | ;-) |
17:09.26 | josh11 | you guyz are genuises :) |
17:09.29 | rob_w | psokolovsky, i agree and for this i feel the many htc devices by know definitly need a merge |
17:09.35 | cr2 | psokolovsky: how many active ports do we have now ? |
17:09.48 | psokolovsky | cr2, it depends what you call active |
17:10.04 | psokolovsky | rob_w, I'd say, not merge, but common code refactoring ;-) |
17:10.16 | rob_w | u can hear complains of the many htc stuff at hh,org kernel list already |
17:10.25 | cr2 | psokolovsky: where something happens now. |
17:10.39 | psokolovsky | sure! |
17:10.45 | cr2 | rob_w: more common drivers, not a merge. |
17:10.50 | psokolovsky | rob_w, what you mean, what complaints? |
17:11.00 | cr2 | the asic3_keys and asic3_leds was a great example. |
17:11.11 | psokolovsky | yep |
17:11.13 | rob_w | some side comments about the volume of htc things |
17:11.53 | rob_w | regarding the directory structuring below arm/mach-pxa/* |
17:12.10 | cr2 | rob_w: but they work, unlike some completely abandoned ports. |
17:12.17 | rob_w | cr2, YES |
17:12.33 | psokolovsky | rob_w, well, there were no complaints. and your guys' work, htc ports, are great! |
17:13.10 | cr2 | psokolovsky: ipaqs are htc devices too :) |
17:13.13 | rob_w | psokolovsky, yeah i know .. but i actually agree as this is the same what we where talking before .. refactoring ! |
17:13.27 | psokolovsky | nice! ;-) |
17:13.49 | rob_w | it is all about finding the correct groups to have a best structure |
17:15.07 | rob_w | hey why dont we get "one name to rule them all " ... |
17:15.21 | rob_w | or so ?? |
17:16.07 | cr2 | rob_w: there is no excuse for having a wildly separate ba config in oe :) |
17:16.15 | rob_w | :-( |
17:16.42 | rob_w | wild in which way ? |
17:17.37 | cr2 | how many different htc phones do we support in CVS ? |
17:17.53 | cr2 | wild means it#s own touchscreen setup, own led setup, etc. |
17:18.01 | rob_w | well many are mentioned , but do they "work" .,. no of course not , they are "under development" |
17:18.37 | cr2 | 8 pxa + 2 samsung. |
17:18.49 | rob_w | cr2, ithink old is the better word , before there know common led etc |
17:19.11 | cr2 | they need some standard interface. |
17:19.44 | cr2 | i've cloned the tsc2046 ts driver for some of the phones, and already see the pain. |
17:19.46 | rob_w | oe introduced some build stuff lately for such |
17:20.14 | cr2 | at least the kernel interface can be the same. |
17:20.17 | rob_w | cr2, its like stretching out all legs and hands but still needs 5 more :) |
17:20.33 | cr2 | do we have asic3 led support on ba now ? |
17:21.27 | rmoravcik | cr2: cvs haret is booting on rx3715 |
17:21.28 | rob_w | cr2, i dont know if ba leds are now merged already , but there where there in its own ba way |
17:22.05 | psokolovsky | rmoravcik, cool, can you do "earlyharetlog.txt" thing and post complete boot log somewhere? |
17:22.15 | rob_w | one of the last things i dd was testing to auto toggle the keyboard , cruel hacks |
17:22.54 | rmoravcik | psokolovsky: yes, and i have mach-rx3715 support too |
17:23.13 | psokolovsky | rmoravcik, then please post that patch instead ;-) |
17:23.16 | rob_w | <PROTECTED> |
17:23.32 | rmoravcik | psokolovsky: on k-d? |
17:23.46 | psokolovsky | rmoravcik, well, better to haret@hh.org |
17:23.59 | rmoravcik | psokolovsky: ok |
17:41.50 | goxboxlive | psokolovsky: With the new update of qte-common.inc in OE. Are you saying that our keyboard will work without any modification to it? |
17:42.09 | goxboxlive | Or is it just the key-buttons and TS you have aded? |
17:42.40 | goxboxlive | Because there are 4 patches in the file that break the keyboard from woring in Opie. |
17:43.23 | goxboxlive | file://c700-hardware.patch;patch=1 \ file://simpad.patch;patch=1 \ file://key.patch;patch=1 \ and file://keyboardless-buttonmap.patch;patch=1 \ |
17:45.05 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
17:45.41 | psokolovsky | goxboxlive, what you mean "breaking"? and sure, I could test only on kbd-less device. |
17:46.25 | goxboxlive | breaking: Not working. It works in the shell, but not in Opie |
17:46.30 | goxboxlive | ABout your OE update |
17:46.50 | goxboxlive | hh7 isent a good version for angstrom. You should cgange it to hh8 as i said yesterday |
17:47.40 | goxboxlive | hh7 miss the navigation pad and all the leds. AFAIR it also miss the mic on the headphone |
17:48.09 | psokolovsky | goxboxlive, No, I shouldn't. You should support patch for that, as requested by Angstrom maintainers. |
17:50.01 | goxboxlive | whats the pint, it will be added after .21-hh7 is running |
17:50.10 | goxboxlive | s/pint/point/ |
17:52.33 | psokolovsky | goxboxlive, well, for some reason you involved Angstrom maintainers into this trivial update, so now comply with their requirements ;-). I indeed could just silently update it to -hh8, voila. But now Koen wants complete change management, so give it to him ;-) |
17:56.00 | Hymie | Hello, my name is Hymie |
17:56.28 | Hymie | s/(Hello), my name is (Hymie)/$2 is running into the word $1/ |
17:56.41 | Hymie | hmm, so, not real perl regexp ;) |
17:58.27 | goxboxlive | :-) Well you know how easy it is. The last patch i added to bugtracker was 1 or 2 months old. One of the Angstrom guys refused to add it since the machine file included rtc modules. I asked hrw to take a look at it, he said it where no problem witth the machine file and the i was added by you a couple of days later. Suddenly one of the ANgstrom guys didnt have any comment to it, it was suudenly OK. Do you see my point. Man i wish the |
17:58.27 | goxboxlive | re where an other easy why to build images, i would have left OE at once. |
18:21.39 | psokolovsky | goxboxlive, what you don't like is also one of its ground points. somebody cannot do random tweaks to the distro config, it must be done thru mainatainers' knowledge of it. and maintainers need to know why exactly the change is needed. ("it works better" doesn't work). Otherwise, it will be havoc. |
18:22.29 | psokolovsky | and there're multiple ways to build images, there's no other good candidate for general distro for all devices. |
18:24.05 | psokolovsky | because if everyone will keep building images for himself, it will continue to be like rob_w said: "port lives as long as there's folks with device around". that doesn't scale. it must live as long as there's a distro which supports it, and kernel tree which maintains it. |
18:24.33 | psokolovsky | both require some rules and adhering to them, though ;-I |
18:26.22 | *** join/#htc-linux pH5 (n=ph5@p5485D9E0.dip.t-dialin.net) |
18:36.18 | pandabear | arrr pH5, the on I've been waiting for |
18:36.43 | pandabear | pH5: Do you have a second ? I failed unpacking the Angstrom image for the magician |
18:38.02 | goxboxlive | psokolovsky: I totaly agree, but it's just sad that you have to argue with you_know_who everytime you want a change. |
18:38.12 | pH5 | pandabear: How? |
18:38.43 | pandabear | EOF is reached to soon when unpacking |
18:39.06 | psokolovsky | goxboxlive, yep, so I prefer to pile up small changes and process them in bunch, but from time to time ;-) |
18:39.10 | pandabear | so it says the file is corrupted, and it does that after multiple downloads |
18:39.23 | pandabear | pH5: |
18:39.32 | pandabear | pH5: so it says the file is corrupted, and it does that after multiple downloads |
18:41.56 | pandabear | pH5: bzcat: Compressed file ends unexpectedly; |
18:41.56 | pandabear | <PROTECTED> |
18:41.56 | pandabear | bzcat: Success |
18:41.56 | pandabear | <PROTECTED> |
18:41.56 | pandabear | It is possible that the compressed file(s) have become corrupted. |
18:41.57 | pandabear | You can use the -tvv option to test integrity of such files. |
18:41.59 | pandabear | You can use the `bzip2recover' program to attempt to recover |
18:42.01 | pandabear | data from undamaged sections of corrupted files. |
18:42.03 | pandabear | tar: Unerwartetes Dateiende im Archiv. |
18:42.05 | pandabear | tar: Unerwartetes Dateiende im Archiv. |
18:42.07 | pandabear | tar: Nicht behebbarer Fehler: Programmabbruch. |
18:42.11 | pandabear | Sorry for the long errormsg |
18:43.11 | pH5 | pandabear: what is the size and md5sum of your file? |
18:44.13 | pandabear | pH5: 8f2d679ce982fe9b3529e78e0b033653 |
18:45.00 | pH5 | should be ad0f3cdcc6038b09d04323ec9e703116 and 19308235 bytes. |
18:45.18 | pH5 | I wonder if there is a problem with the webserver. |
18:45.59 | pH5 | But the md5sum of the upload seems to be correct. |
18:48.28 | pandabear | wierd, but multiple downloads all resulted in the same corrupted file (wget, kget an firefox) |
18:48.36 | pandabear | hrm, does kget use wget as a backend ? |
18:50.10 | pH5 | pandabear: I don't know. I'm downloading with wget now, let's see if I get the same file that I sent.. |
18:53.39 | pandabear | pH5: wierd, yesterday he displayed the filesize as 15MB when I opened up the downloadpage, maybe it was a serverissue |
18:54.14 | pH5 | pandabear: aah, you tried yesterday? |
18:54.19 | pandabear | yes |
18:54.22 | pH5 | indeed, I uploaded the corrected version this morning |
18:54.25 | pH5 | sorry about that ;) |
18:54.41 | pandabear | ahh alright, well I could have seen that the date changed too ... |
18:54.57 | pH5 | so try again, now it should work. |
18:56.12 | pandabear | the md5sum is right now, looks like it'll be fine |
18:56.24 | pH5 | ok |
18:58.15 | pandabear | btw, is there a reason to use the old haret version ? |
19:05.07 | kimuSan^ | cr2: did you have a new kernel somewhere. your talked about EFB config etc. |
19:10.48 | pandabear | pH5: yey, it's working, seems like alot happend since I checked last time |
19:11.51 | pandabear | pH5: much faster now either, great work ! |
19:17.58 | *** part/#htc-linux meron (n=meron@p508672D7.dip.t-dialin.net) |
19:27.32 | pH5 | pandabear: no reason to use the old haret version, it's just a version that is known to work |
19:33.35 | *** join/#htc-linux TripleDES (n=sergio@89.129.213.195) |
19:42.41 | *** join/#htc-linux TripleDE1 (n=sergio@89.129.214.67) |
19:52.06 | *** join/#htc-linux TripleDE2 (n=sergio@89.129.133.209) |
19:57.09 | BabelO | goxboxlive ? |
19:57.24 | BabelO | oups not here |
20:01.25 | *** join/#htc-linux pandabear (n=karsten@i59F75EBD.versanet.de) |
20:02.20 | *** join/#htc-linux TripleDES (n=sergio@89.129.137.159) |
20:02.37 | pandabear | pH5: Is this a USB hub in there so I can attach a hdd ? |
20:02.54 | pandabear | or just these 3 client functions ? |
20:05.59 | pH5 | pandabear: the one usb host port is connected internally to the bluetooth chip. |
20:06.57 | pandabear | and the external one ? |
20:07.38 | pandabear | pH5: and the external one ? it just has client functions ? |
20:07.46 | pH5 | client only as far as I know |
20:20.19 | pandabear | pH5: *sigh* too bad, would have been cool to plugin a dvb-t card or external hdd |
21:09.43 | *** join/#htc-linux VisN (n=VisualN@ip227.131.adsl.wplus.ru) |
21:34.06 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
21:51.37 | pandabear | pH5: Have you changed the mounting of the sdcard ? it looks like it's moving as much as possible into the ram |
22:00.03 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
22:20.13 | *** join/#htc-linux icebear (n=karsten@i59F75EBD.versanet.de) |
22:20.41 | icebear | damn connection |
22:23.40 | cr2 | pH5: what are the differences between your angstrom image and that of goxboxlive ? |
22:31.35 | kimuSan^ | nite all |
22:33.38 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
22:43.57 | *** join/#htc-linux TripleDES (n=sergio@89.129.137.20) |
22:47.04 | cr2 | goxboxlive: what opie keyboard patches do you want to "revert" ? |
22:47.25 | goxboxlive | Do you mean in qte-common.inc |
22:47.59 | cr2 | i think something in these patches it not clean, and they affect not only this particular device, but all others. |
22:48.01 | cr2 | yes. |
22:48.16 | cr2 | your way to do it is obviously unacceptable. |
22:48.54 | cr2 | doing bitbake opie-image now. |
22:50.07 | goxboxlive | Yes i know it is unacceptable, but i have asked for help, and no one has reacted. |
22:50.36 | cr2 | which patches are that ? |
22:51.09 | cr2 | i'll try to look at it and locate the non-device-specific code. |
22:51.21 | goxboxlive | I have sendt u my file |
22:52.15 | cr2 | yes, found it. |
22:53.31 | cr2 | what devices does angstrom actually support ? |
22:53.33 | goxboxlive | I am looking at debian now. Have installed a debootstrap image. Will try to install our modules and boot it |
22:53.43 | cr2 | only hx4700 and h2200 ? |
22:53.43 | goxboxlive | I dont know. |
22:54.06 | goxboxlive | No, there are a lot more. Check linuxtogo.org/angstrom |
22:54.35 | cr2 | Page not found |
22:56.07 | cr2 | ok, these are 4 files. c700 (some zaurus afaik) , simpad, simpad something, and key.patch |
22:56.43 | cr2 | wow. finally there is some kernel in oe that actually compiles. |
22:57.51 | cr2 | 2.3.10 or 2.3.12 ? |
22:58.08 | goxboxlive | Yes of course the kernel compile. The 18-hh1 was added without asking any of us. When they change anything for the universal i think they should ask us before they do it. |
22:58.13 | goxboxlive | 2.3.10 |
22:58.46 | cr2 | that's why i have asked about the list of supported devices. |
23:00.17 | goxboxlive | http://www.angstrom-distribution.org/ |
23:01.49 | cr2 | ok, so it's h2200 and some recent zaurus models. |
23:03.00 | cr2 | and hx4700 |
23:08.57 | pH5 | cr2: I don't know what goxboxlive's angstrom image includes. I added some things I need to the default image (devmem2, gomunicator) and of course it has the magician modules installed. |
23:10.32 | cr2 | pH5: modules are irrelevant. imho they are not really the part of the image. |
23:11.12 | cr2 | i may write a list of universal-specific modifications made by goxboxlive. |
23:11.28 | cr2 | i see the tslib in this list, but don't really understand why. |
23:12.22 | pH5 | tslib? why does it need |
23:12.25 | pH5 | modifications? |
23:12.42 | goxboxlive | It something that where added the last days. It's for getting rid of export tslib in opie |
23:13.18 | pH5 | Ah ok. I'm not familiar with opie. |
23:13.57 | cr2 | it comes from blueangel i guess. that also wants to modify tslib config for some reason. |
23:14.10 | cr2 | pH5: tslib has nothing to do with opie. |
23:14.51 | cr2 | there are 2 problems with opie: keyboard and suspend. i'll try to solve the 1 problem now. |
23:19.21 | cr2 | goxboxlive: are you sure that you need to exclude all 4 patches ? |
23:20.50 | pH5 | It appears that tslib doesn't need any special configuration anymore for most devices. and as universal/magician/hx4700 are pretty much identical from a touchscreen point of view, whatever reasons there are to modify tslib, I don't think they are device specific. |
23:21.06 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-13-66.dynamic.mnet-online.de) |
23:22.16 | cr2 | pH5: yes, that's why i'm surprrised. |
23:22.55 | cr2 | NOTE: base-files contains dangling symlink to /media/card |
23:22.55 | cr2 | NOTE: base-files contains dangling symlink to /media/cf |
23:22.55 | cr2 | NOTE: base-files contains dangling symlink to /media/net |
23:22.55 | cr2 | NOTE: base-files contains dangling symlink to /media/ram |
23:23.07 | cr2 | that's some zaurus' weirdness. |
23:30.29 | goxboxlive | cr2: FOr a half year ago, i tested out averey single combination. You are free to try it out again :-) (it takes ages). I found out that all the four of them breaks the keyboard |
23:33.58 | cr2 | ok. |
23:34.20 | cr2 | hm. perl is compiled ? |
23:34.40 | cr2 | i think we should kill the tslib patch. |
23:35.09 | cr2 | it is not doing anything useful and only creates confusion. |
23:35.30 | cr2 | btw, the keymaps package. what keymaps do you have now ? |
23:37.08 | cr2 | simpad-defaultkbd.patch |
23:37.24 | cr2 | i doublt it can create any problems on universal. |
23:37.24 | goxboxlive | I dont have any in qte. But in kernel-keymap |
23:37.35 | cr2 | can you enable it ? |
23:37.43 | goxboxlive | in qte? |
23:37.51 | cr2 | yes. |
23:37.58 | goxboxlive | no |
23:38.11 | cr2 | -#if defined( QT_QWS_CASSIOPEIA ) |
23:38.11 | cr2 | +#if defined( QT_QWS_CASSIOPEIA ) || defined( QT_QWS_SIMPAD ) |
23:38.23 | goxboxlive | i have tried before, and it result in starting a new build. |
23:38.29 | cr2 | it has nothing to do with universal, and can't make any harm. |
23:38.41 | cr2 | of course it will ;) |
23:39.35 | cr2 | this patch just can't hurt universal. |
23:39.44 | goxboxlive | The 4 first ones i have commented breaks the keyboard. The rest i dont know. I tested some combinations but since i had it working i didnt care if they where not aplied |
23:40.51 | cr2 | ok, but we need to care ,if we want to produce a patch. |
23:42.04 | goxboxlive | why, it hasent anything to say if we create a patch only for universal. |
23:43.59 | cr2 | there is no sense to exclude or correct this patch in a general case. |
23:44.15 | cr2 | simpad.patch is more involved. |
23:44.35 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
23:44.45 | cr2 | i can't say just looking at the patch itself, if it can hurt a generic device. |
23:45.18 | *** join/#htc-linux nixu (n=sd@85.232.212.174) |
23:45.39 | nixu | hi there |
23:46.21 | nixu | I have a universal and insalled both OPIE & GPE.... |
23:46.35 | nixu | & really liked the idea |
23:46.54 | nixu | Any tips from where i can down load the sources an compile them ?? |
23:47.25 | nixu | is there a cvs for universal? |
23:47.52 | nixu | any help?\ |
23:48.03 | cr2 | +#if defined(QT_QWS_IPAQ) || defined(QT_QWS_SL5XXX) |
23:48.03 | cr2 | <PROTECTED> |
23:48.03 | cr2 | <PROTECTED> |
23:48.11 | cr2 | this looks suspicious. |
23:48.20 | cr2 | nixu: which sources ? |
23:48.40 | cr2 | kernel of userspace ? |
23:48.45 | cr2 | s/of/or/ |
23:50.06 | nixu | lets start with the kernel at least |
23:51.14 | goxboxlive | nixu: http://www.handhelds.org/moin/moin.cgi/UniversalKernel |
23:51.39 | nixu | 10x will give it alook |
23:51.47 | cr2 | goxboxlive: have you deleted the .12 and .16 files ? |
23:52.26 | cr2 | NOTE: package sqlite3-3.3.9-r2: task do_compile: failed |
23:52.26 | cr2 | ERROR: TaskFailed event exception, aborting |
23:52.26 | cr2 | NOTE: package sqlite3-3.3.9: failed |
23:52.26 | cr2 | ERROR: Build of opie-image failed |
23:52.46 | cr2 | | ./.libs/libsqlite3.so: undefined reference to `pthread_key_create' |
23:52.50 | cr2 | | ./.libs/libsqlite3.so: undefined reference to `pthread_getspecific' |
23:52.54 | cr2 | | ./.libs/libsqlite3.so: undefined reference to `pthread_create' |
23:52.58 | cr2 | | ./.libs/libsqlite3.so: undefined reference to `pthread_setspecific' |
23:52.59 | cr2 | | ./.libs/libsqlite3.so: undefined reference to `pthread_join' |
23:52.59 | cr2 | | collect2: ld returned 1 exit status |
23:52.59 | cr2 | | make: *** [sqlite3] Fehler 1 |
23:52.59 | cr2 | | FATAL: oe_runmake failed |
23:53.15 | cr2 | goxboxlive: can you compile this package ? |
23:53.17 | goxboxlive | i dont remember |
23:53.35 | cr2 | it's strait bitbake opie-image |
23:54.02 | goxboxlive | not now, my OE.dev has crashed and i havent checked out a new one yes |
23:54.05 | goxboxlive | yest |
23:54.07 | goxboxlive | yet |
23:54.10 | goxboxlive | :-) |
23:54.10 | cr2 | ok. |
23:54.13 | cr2 | http://gnulinux.biz/files/Universal/sd-mmc |
23:54.18 | cr2 | .12 and .16 are there. |
23:54.53 | cr2 | the squlite compilation looks like an oe bug. |
23:55.17 | cr2 | pH5: can you compile sqlite3 ? |
23:56.15 | pH5 | dunno. gpe uses sqlite 2.8.17 |
23:56.27 | cr2 | hmm. |
23:56.58 | cr2 | can you try to bitbake sqlite3 ? |
23:57.06 | cr2 | only this package. |
23:57.17 | pH5 | cr2: already started :) |
23:57.43 | cr2 | thanks :) |