| 00:17.44 | lkcl | allo darlins |
| 00:18.15 | BabelOued | lkcl: hey |
| 00:18.41 | *** join/#htc-linux booba (n=booba@81.56.252.135) |
| 00:19.07 | lkcl | allo Babel |
| 00:19.45 | BabelOued | you work only on night :) |
| 00:21.01 | BabelOued | eh eh adcm2650 module compile :) |
| 00:27.28 | BabelOued | lkcl do you know this :Performance Monitoring Unit on all CPUs based on the XScale core ? |
| 00:27.44 | lkcl | clueless, Babel. |
| 00:27.56 | lkcl | it's a long story, Babel... |
| 00:28.25 | BabelOued | long long story ? |
| 00:31.57 | Ralith | if all goes well I should be getting the Universal in about a week |
| 00:31.57 | lkcl | allo ralith |
| 00:32.04 | lkcl | hooray! |
| 00:36.52 | Ralith | ^_^ |
| 00:38.34 | Ralith | one thing wtfs me, though |
| 00:38.46 | Ralith | I've read that the thing's battery life is 200 hours idle. That doesn't seem half bad |
| 00:49.15 | lkcl | ok i got lots of low-volume spllllgh |
| 00:49.24 | lkcl | Palith: with or without the phone switched on? |
| 00:51.28 | BabelOued | that s a good start |
| 00:57.52 | Ralith | lkcl, I would hope that it wouldn't consume any with it switched off :P |
| 00:57.57 | Ralith | I assumed they meant standby |
| 00:58.08 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
| 03:09.09 | *** part/#htc-linux RoEn (n=roen@p54A67B67.dip.t-dialin.net) |
| 04:01.56 | *** join/#htc-linux Kmarc (i=kari@markos.biz) [NETSPLIT VICTIM] |
| 04:01.57 | *** join/#htc-linux pof (n=pof@173.red-62-57-1.user.auna.net) [NETSPLIT VICTIM] |
| 04:01.57 | *** join/#htc-linux scatterp (i=scatterp@packet.filtered.ca) [NETSPLIT VICTIM] |
| 04:01.57 | *** join/#htc-linux psokolovsky_ (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) [NETSPLIT VICTIM] |
| 06:16.50 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 06:16.50 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux |
| 07:14.43 | *** join/#htc-linux LunohoD_ (n=alex@e180101006.adsl.alicedsl.de) |
| 07:38.40 | *** join/#htc-linux rmoravcik (n=rmoravci@icm1-orange.orange.sk) |
| 07:58.01 | *** join/#htc-linux rmoravcik (n=rmoravci@icm3-orange.orange.sk) |
| 08:15.59 | *** join/#htc-linux RoEn_PC (n=roen@p54A670E8.dip.t-dialin.net) |
| 09:11.35 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 09:33.11 | *** join/#htc-linux rob_w (n=bob@p85.212.177.219.tisdip.tiscali.de) |
| 09:38.27 | *** join/#htc-linux pwr (n=pwr@86.121.148.71) |
| 09:46.02 | *** join/#htc-linux TripleDES (n=sergio@89.129.143.241) |
| 10:31.44 | *** join/#htc-linux Fossi (n=Fossi@e176115134.adsl.alicedsl.de) |
| 10:39.56 | lkcl | ok darlins am back to the uk cya online this evening or tomorrow |
| 10:41.24 | *** join/#htc-linux buz (n=buz@84-73-95-139.dclient.hispeed.ch) |
| 10:42.31 | buz | there's currently no workingn linux for the prophet right? (i could get a nearly new one very cheap) |
| 10:44.25 | LunohoD_ | buz: /join #linwizard |
| 10:45.19 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 10:51.57 | *** part/#htc-linux lkcl (n=lkcl@535411CB.cable.casema.nl) |
| 11:01.17 | *** join/#htc-linux florian (n=fuchs@84-245-187-155.wue.bpool.celox.de) |
| 11:02.22 | *** join/#htc-linux booba (n=booba@AAnnecy-256-1-5-119.w90-10.abo.wanadoo.fr) |
| 11:14.16 | *** join/#htc-linux florian_ (n=fuchs@87.193.30.29) |
| 11:40.49 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 12:29.35 | frankie | any suggestion about having my blueangel susped/resume at least trying working? |
| 12:34.24 | *** join/#htc-linux rmoravcik (n=rmoravci@icm6-orange.orange.sk) |
| 12:34.34 | *** join/#htc-linux rmoravcik (n=rmoravci@icm6-orange.orange.sk) |
| 13:51.43 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
| 14:18.35 | Kevin2 | ping WizMaui |
| 14:42.04 | *** join/#htc-linux rmoravcik (n=rmoravci@icm3-orange.orange.sk) |
| 14:58.14 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 14:58.37 | asylumed | frankie: you still there? |
| 14:58.51 | frankie | asylumed: yep |
| 14:59.18 | asylumed | frankie: what you need help with? |
| 14:59.32 | asylumed | frankie: as far as i know resume does work? |
| 14:59.58 | frankie | asylumed: not on this blueangel series, i cannot see the battery status even |
| 15:00.27 | frankie | asylumed: http://handhelds.org/moin/moin.cgi/BlueAngel this one I mean |
| 15:00.34 | asylumed | frankie: i have a blueangel too... fixed the suspend a while ago... |
| 15:00.50 | asylumed | frankie: what boardid though? |
| 15:00.53 | frankie | asylumed: i'm currently using the images of kernel and gpe suggested there |
| 15:01.06 | frankie | asylumed: just a moment, i'm booting it up |
| 15:01.06 | asylumed | frankie: aaah... and you get a white screen on resume? |
| 15:02.36 | frankie | asylumed: i cannot having resuming at all, at least the susped button (on the top) does not work |
| 15:04.11 | asylumed | frankie: hang on... so it doesn't even suspend? |
| 15:04.19 | frankie | asylumed: yes |
| 15:05.01 | frankie | asylumed: and i have a device read error checkin the battery status |
| 15:05.02 | asylumed | frankie: right... all i can tell you then is those images are rather old... |
| 15:05.11 | frankie | asylumed: i suspect that |
| 15:05.23 | asylumed | frankie: and the battery status doesn't work... still :/ |
| 15:05.58 | frankie | asylumed: ah ok, any url for more recent images? just to try before i start to use openembedded to x-compile things... |
| 15:06.35 | asylumed | frankie: it's probably your safest bet... |
| 15:07.09 | asylumed | frankie: else ask BabelOued for an image... mine are in a bad way atm... |
| 15:09.43 | frankie | asylumed: just another thing, if i pressed the reset button, it simply power off and does not restart til I remove the battery, is it a possible haret issue? |
| 15:11.30 | asylumed | frankie: hmm... as far as i know it just needs a hard reset... not sure if it's a haret issue... but it's always been like that... |
| 15:12.38 | frankie | asylumed: ah i found those ones http://gnulinux.biz/files/blueangel/people/rob_w/sd |
| 15:13.01 | frankie | asylumed: at least 6 month later than those pointed on the wiki |
| 15:27.08 | *** join/#htc-linux psokolovsky_ (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 16:17.38 | *** join/#htc-linux pH5 (n=ph5@p5485FAD6.dip.t-dialin.net) |
| 16:21.05 | *** join/#htc-linux asylumed (n=insanity@196.211.28.91) |
| 16:41.43 | *** part/#htc-linux asylumed (n=insanity@196.211.28.91) |
| 17:15.43 | Kevin2 | ping cr2 |
| 17:17.54 | Kevin2 | Well, if you get this message - try rerunning your "wi" while using haretconsole. |
| 18:26.58 | cr2 | Kevin2: trying now. |
| 19:09.58 | *** join/#htc-linux rob_w (n=bob@p85.212.177.219.tisdip.tiscali.de) |
| 19:20.01 | cr2 | Kevin2: it looks a bit better now, but still not right. |
| 19:20.05 | cr2 | 043.952823 09633cc0: disassemble error # r3=0000e946 r2=a9200200 |
| 19:20.06 | cr2 | 043.952824 09633c74: disassemble error # r2=00000000 r3=a9200200 |
| 19:20.06 | cr2 | 043.952838 09633cc0: disassemble error # r3=00004610 r2=a9200200 |
| 19:20.06 | cr2 | 043.952840 09633c74: disassemble error # r2=00000000 r3=a9200200 |
| 19:20.06 | cr2 | 043.952853 09633cc0: disassemble error # r3=000010da r2=a9200200 |
| 19:31.05 | *** join/#htc-linux psokolovsky__ (n=psokolov@237.usernat.ip.net.ua) |
| 19:37.54 | cr2 | and these are the places where it fails |
| 19:37.59 | cr2 | seg000:01633C60 STMFD SP!, {R4,R5,LR} |
| 19:38.03 | cr2 | seg000:01633C64 LDR R5, =ASIC3SPI |
| 19:38.07 | cr2 | seg000:01633C68 MOV R2, R0,LSL#8 |
| 19:38.12 | cr2 | seg000:01633C6C MOV R4, #0 |
| 19:38.12 | cr2 | seg000:01633C70 LDR R3, [R5] |
| 19:38.12 | cr2 | seg000:01633C74 STRH R2, [R3,#2] |
| 19:38.12 | cr2 | seg000:01633C78 LDR R2, [R5] |
| 19:38.13 | cr2 | seg000:01633C7C LDRH R3, [R2] |
| 19:38.56 | cr2 | for writing |
| 19:39.00 | cr2 | and for reading |
| 19:39.05 | cr2 | seg000:01633CB0 LDR R2, [R5] |
| 19:39.05 | cr2 | seg000:01633CB4 LDRH R3, [R2,#8] |
| 19:39.05 | cr2 | seg000:01633CB8 TST R3, #0x10 |
| 19:39.06 | cr2 | seg000:01633CBC BNE loc_1633C9C |
| 19:39.06 | cr2 | seg000:01633CC0 LDRH R3, [R2,#4] |
| 19:39.06 | cr2 | seg000:01633CC4 AND R0, R3, #0xFF |
| 19:39.54 | cr2 | i remember something you have told about the problems with the absolute offsets. |
| 19:40.59 | *** join/#htc-linux JuNuKN (n=chatzill@X5e73.x.pppool.de) |
| 19:49.51 | *** join/#htc-linux RoEn_PC (n=roen@p54A670E8.dip.t-dialin.net) |
| 20:03.35 | *** join/#htc-linux mind__ (n=mind@2.81-167-1.customer.lyse.net) |
| 20:21.51 | *** join/#htc-linux scatterp (i=scatterp@packet.filtered.ca) |
| 20:50.11 | BabelOued | hi |
| 20:50.21 | BabelOued | goxboxlive are you here ? |
| 20:51.38 | BabelOued | i m looking for pcmcia-cs package |
| 20:58.31 | goxboxlive | BabelOued i am here |
| 20:58.40 | BabelOued | hello |
| 20:59.08 | goxboxlive | hi |
| 20:59.14 | BabelOued | can you build a package for me ? |
| 20:59.25 | goxboxlive | For the universal? |
| 20:59.32 | BabelOued | i use your opie image for blueangel |
| 20:59.35 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 20:59.39 | cr2 | goxboxlive: hi |
| 20:59.46 | BabelOued | hi cr2 |
| 20:59.46 | goxboxlive | cr2 hi |
| 21:00.28 | cr2 | goxboxlive: i think about more brutal methods to discover audio routing :) |
| 21:00.34 | cr2 | hi BabelOued |
| 21:01.25 | cr2 | pull the codec power down while speaking on the phone. |
| 21:05.18 | goxboxlive | what do you mean? the alsamixer or unload snd-pcm and snd-mixer modules? |
| 21:05.40 | cr2 | in wince. |
| 21:06.02 | goxboxlive | <BabelOued> i have the pcmcia-cs ipks for htcuniversal. DOnt know if they will work on your BA |
| 21:06.15 | cr2 | change the asic3 gpio level |
| 21:06.51 | BabelOued | goxboxlive: thanks :) where can i get it ? |
| 21:07.11 | goxboxlive | BabelOued> whats your e-mail ? |
| 21:10.40 | goxboxlive | Cr2: What do you mean. Should i enable debbugghing again ? |
| 21:12.39 | *** join/#htc-linux JuNuKN (n=chatzill@X5e73.x.pppool.de) |
| 21:15.22 | goxboxlive | ok, guess i know what you mean. I'll do a phonecall with the changing the volume with the gpio button while i am talking, and send you the debug file. |
| 21:16.50 | cr2 | goxboxlive: no. you need to run a haret command while calling. |
| 21:17.45 | BabelOued | thanks goxboxlive compile is ok |
| 21:18.17 | *** join/#htc-linux rob_w (n=bob@p85.212.179.23.tisdip.tiscali.de) |
| 21:19.05 | goxboxlive | cr2: whats the haret command? |
| 21:21.38 | *** join/#htc-linux psokolovsky_ (n=psokolov@237.usernat.ip.net.ua) |
| 21:27.47 | *** join/#htc-linux RoEn_PC (n=roen@p54A670E8.dip.t-dialin.net) |
| 21:34.26 | cr2 | goxboxlive: do you run telnet, of want a script ? |
| 21:35.15 | goxboxlive | well i guess i need a scipt. IRDA is not working on my laptop. |
| 21:39.02 | cr2 | wifi ? |
| 21:39.14 | goxboxlive | wifi works |
| 21:43.25 | goxboxlive | Trying 10.0.0.1... |
| 21:43.25 | goxboxlive | telnet: Unable to connect to remote host: Connection refused |
| 21:43.55 | cr2 | start haret, and press 'listen for connection'. |
| 21:44.08 | goxboxlive | that's waht i have done |
| 21:44.42 | goxboxlive | and then i get Connection refused |
| 21:45.02 | cr2 | why is it 10.0.0.1 ? |
| 21:45.18 | cr2 | on which port do you telnet ? |
| 21:45.18 | goxboxlive | because my wince ip adress is it |
| 21:45.28 | cr2 | telnet 10.0.0.1 9999 |
| 21:45.32 | goxboxlive | isent telnet 20 ? ok |
| 21:45.47 | cr2 | haret listens on 9999 |
| 21:45.50 | goxboxlive | ok then i am in |
| 21:45.51 | cr2 | telnet port is 23 |
| 21:45.57 | goxboxlive | thats right |
| 21:46.33 | cr2 | ok. now i need to remember the haret syntax :) |
| 21:47.13 | cr2 | we need to read the asic3gpioa, change 1 bit, and write it back. |
| 21:47.25 | *** join/#htc-linux florian (n=fuchs@87.193.30.29) |
| 21:49.55 | goxboxlive | yes and how do i do that? |
| 21:50.52 | BabelOued | goxboxlive: what is ping command response ? |
| 21:51.31 | goxboxlive | i dont know |
| 21:52.33 | cr2 | goxboxlive: i'm looking for it now. don't want to create a haret command for this issue alone. |
| 21:52.44 | goxboxlive | o |
| 21:54.56 | *** join/#htc-linux RoEn_PC (n=roen@p54A670E8.dip.t-dialin.net) |
| 21:59.39 | florian | re |
| 21:59.43 | cr2 | ok. |
| 22:00.36 | cr2 | pd 0x10000018 4 |
| 22:00.52 | cr2 | while calling. |
| 22:02.51 | goxboxlive | ok |
| 22:05.07 | goxboxlive | HaRET(1)# pd 0x10000018 4 |
| 22:05.07 | goxboxlive | 10000018 | f9a5f9a5 | ... |
| 22:05.28 | goxboxlive | cr2: anything else? |
| 22:06.57 | goxboxlive | cr2: This is with headphones: |
| 22:07.00 | goxboxlive | HaRET(4)# pd 0x10000018 4 |
| 22:07.01 | goxboxlive | 10000018 | f9adf9ad |
| 22:07.14 | cr2 | pfh 0x10000004 1 0xf9a1 |
| 22:07.29 | goxboxlive | and this is with loadspeaker: |
| 22:07.43 | cr2 | it will pull do ~0x4, and switch the codec power off. |
| 22:07.48 | goxboxlive | HaRET(5)# pd 0x10000018 4 |
| 22:07.48 | goxboxlive | 10000018 | f9e7f9e7 |
| 22:08.11 | cr2 | two more bits for the speaker power. |
| 22:08.15 | goxboxlive | pd 0x10000018 4 |
| 22:08.18 | goxboxlive | sorry |
| 22:08.55 | goxboxlive | The codec power or "mute" doesnt mather, it is the same output |
| 22:09.07 | goxboxlive | now i try pfh 0x10000004 1 0xf9a1 |
| 22:09.39 | goxboxlive | HaRET(7)# pfh 0x10000004 1 0xf9a1 |
| 22:09.39 | goxboxlive | HaRET(8)# pd 0x10000018 4 |
| 22:09.40 | goxboxlive | 10000018 | f9a1f9a1 |
| 22:09.53 | cr2 | does you mic work ? |
| 22:10.04 | goxboxlive | yes |
| 22:10.11 | goxboxlive | i am using wince |
| 22:10.26 | goxboxlive | main mic, i am not using the headphones now. |
| 22:10.52 | cr2 | i mean, you are "in" a call, and do this "pfh" ? |
| 22:11.00 | goxboxlive | yes |
| 22:11.11 | *** join/#htc-linux rmoravcik (n=rmoravci@icm5-orange.orange.sk) |
| 22:11.11 | cr2 | and the sound does not break ? |
| 22:11.24 | goxboxlive | no, not in the other phone |
| 22:11.28 | cr2 | well, the speaker will work anyway. |
| 22:11.45 | cr2 | can you hear the voice in the other phone ? |
| 22:11.49 | goxboxlive | yes |
| 22:12.09 | cr2 | ok. so switching the codec power does not affect the mic. |
| 22:12.21 | cr2 | or this is not the codec power :) |
| 22:12.35 | goxboxlive | ok |
| 22:12.39 | cr2 | can you try to write 0xf9a0 ? |
| 22:12.43 | goxboxlive | ok |
| 22:12.56 | cr2 | read/write/read |
| 22:13.41 | goxboxlive | Nothing happends: |
| 22:13.44 | goxboxlive | HaRET(9)# pfh 0x10000004 1 0xf9a0 |
| 22:13.44 | goxboxlive | HaRET(10)# pd 0x10000018 4 |
| 22:13.44 | goxboxlive | 10000018 | f9a0f9a0 |
| 22:15.17 | cr2 | ok. |
| 22:15.23 | goxboxlive | shall i end the call? |
| 22:15.28 | cr2 | yes. |
| 22:15.44 | cr2 | so the mic is not serviced by ak4641. |
| 22:16.01 | cr2 | and is hooked directly to the MSM. |
| 22:16.34 | cr2 | hmm. but how do we activate it then ??? |
| 22:16.46 | goxboxlive | ok, even in flight mode? |
| 22:16.55 | cr2 | maybe we are missing some AT command ?? |
| 22:17.09 | cr2 | you can't talk in flight mode :) |
| 22:17.31 | goxboxlive | But you can di a record (note) |
| 22:17.35 | cr2 | cp15 said it is hardwired on blueangel too. |
| 22:17.37 | goxboxlive | s/di/do/ |
| 22:17.48 | goxboxlive | ok |
| 22:17.56 | cr2 | do a record ? |
| 22:18.19 | cr2 | it may be connected both to ak4641 and MSM. |
| 22:18.29 | goxboxlive | take a note, like recording your voice. Do a memo if you know what i mean. |
| 22:18.42 | cr2 | on ba: to uda1380 and MSM. |
| 22:18.49 | goxboxlive | ok |
| 22:18.53 | cr2 | yes. |
| 22:19.23 | cr2 | you switch ak4641 on, and record the PCM from I2S port. |
| 22:19.54 | cr2 | btw, how do you init the phone ? |
| 22:20.11 | cr2 | do you send all the wince init AT commands ? |
| 22:20.18 | goxboxlive | from linux? |
| 22:20.20 | cr2 | yes. |
| 22:20.24 | goxboxlive | with cu? |
| 22:20.32 | cr2 | yes. |
| 22:20.38 | cr2 | or gomunicator. |
| 22:20.56 | goxboxlive | you thought me. gomnicator doesnt work, cuas eof some dbus rules. |
| 22:21.02 | cr2 | ok. |
| 22:21.20 | cr2 | i doubt you send all wince init commands with cu :) |
| 22:21.55 | goxboxlive | First you have to change owner of ttyS0 to uusp, then make a folder /usr/spool . Change spool owver to uucp |
| 22:22.16 | goxboxlive | then run cu -l /dev/ttyS0 -s 115200 |
| 22:22.33 | goxboxlive | No i have not runned all of them just some few. |
| 22:23.54 | goxboxlive | But i am close to get gomnicator running. I have managed to let it init the pone now. I had to add a sleep (4) before init, but i have problems with the dbus rules because of the battery stuff that is commited the latest week. |
| 22:25.32 | goxboxlive | rob_w are you around |
| 22:25.51 | cr2 | imho, you should send all the commands, unless you are sure that they do not affect the sound state. |
| 22:26.25 | goxboxlive | cr2: what all commnds, the ones listed at xda? |
| 22:26.27 | cr2 | as you can see, switching the ak4641 off has no effect on the mic in phone. |
| 22:27.22 | cr2 | goxboxlive: these are for 1.04 radio ROM. you have some extra commands. |
| 22:27.22 | goxboxlive | ok, how did you dump them? |
| 22:27.23 | cr2 | EFDNMODE, and some more. you can see them in your ATdebug log. |
| 22:27.47 | goxboxlive | form haret? |
| 22:27.56 | goxboxlive | s/form/from/ |
| 22:31.01 | cr2 | no. i have asked you to enable AT debug in wince registry, and you have send me the log later. |
| 22:32.10 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 22:34.38 | cr2 | AT@HTCSAP=1 |
| 22:34.44 | goxboxlive | did you know this one: at@volset=x |
| 22:35.42 | cr2 | yes. i think it is always =2 |
| 22:35.45 | cr2 | +CMUT=0 |
| 22:36.16 | cr2 | will do the mute probably. |
| 22:37.04 | cr2 | AT+EFDNMODE=1 |
| 22:37.08 | cr2 | this one is new. |
| 22:37.15 | *** join/#htc-linux RoEn_PC (n=roen@p54A670E8.dip.t-dialin.net) |
| 22:38.40 | cr2 | goxboxlive: another interesting test is to switch off the ak4641 while calling with the headphone. |
| 22:38.51 | cr2 | but i guess the result will be the same. |
| 22:42.06 | goxboxlive | at@volset=x is not allways 2. It changes when i am using the volume slider. |
| 22:42.40 | goxboxlive | It has values 1 to 5. |
| 22:42.59 | *** join/#htc-linux rmoravcik (n=rmoravci@icm3-orange.orange.sk) |
| 22:43.14 | *** join/#htc-linux rmoravcik (n=rmoravci@icm3-orange.orange.sk) |
| 22:44.28 | cr2 | ok. |
| 22:48.12 | *** join/#htc-linux ralith_ (n=ralith@soggy202.drizzle.com) |
| 23:00.13 | goxboxlive | cr2: I did some tests: |
| 23:00.23 | goxboxlive | AT@AUDIOSET=2,0,0,5\r is the speaker over the lcd. |
| 23:00.49 | goxboxlive | AT@AUDIOSET=0,0,0,5\r is the speaker on the front cover (the side without lcd screen). |
| 23:04.10 | goxboxlive | AT@AUDIOSET=2,0,0,5\r is when i rotate the lcd screen back again. |
| 23:04.51 | goxboxlive | AT@AUDIOSET=7,0,0,5\r when i plugged headphones. |
| 23:05.07 | goxboxlive | AT@AUDIOSET=1,0,0,5\r ehn i unplugged them |
| 23:05.46 | cr2 | 5 at the end seems to be the VOLSET. |
| 23:05.56 | goxboxlive | AT@AUDIOSET=7,0,0,5\r Is when i put on SPEAKER PHONE (loud thrue the stereospeakers) |
| 23:06.06 | cr2 | AUDIOSET=1 ? interesting. i have never seen it before. |
| 23:06.09 | goxboxlive | do you see, the same as headphones and loudpesking |
| 23:06.39 | cr2 | are you running wi in haret ? |
| 23:07.12 | goxboxlive | no, can i see it live with wi? |
| 23:07.23 | cr2 | "when i rotate the lcd screen back again" |
| 23:07.36 | cr2 | i have checked. the sound comes or of both speakers |
| 23:07.43 | goxboxlive | ok, |
| 23:07.48 | cr2 | s/or /out / |
| 23:08.02 | cr2 | you can, but as a hexdump. |
| 23:08.06 | goxboxlive | ok |
| 23:08.21 | cr2 | you need to postprocess it. |
| 23:09.12 | cr2 | we need to ask Kevin if it is possible to do the postprocessing in near-realtime. |
| 23:09.12 | goxboxlive | so you mean that there is no AT change when roattiing the cover? |
| 23:09.51 | cr2 | i'll try myself. |
| 23:10.59 | goxboxlive | If it is not, the 0,0,0,5 is the headphones, and 7,0,0,5 is the main speakers, But then i have no idea what 1,0,0,5 is. |
| 23:12.54 | cr2 | 1,0,0,5 is puzzling. |
| 23:13.20 | cr2 | 3,0,0,x has something to do with the BT headset. |
| 23:13.42 | cr2 | 2-7, 1-6, 4-5, 3-8 |
| 23:13.49 | cr2 | and 0 |
| 23:19.21 | cr2 | goxboxlive: do you have minicom ipk ? |
| 23:23.04 | goxboxlive | hold on |
| 23:23.20 | cr2 | you can use it instead of cu. |
| 23:23.37 | goxboxlive | ok, i looking for it now |
| 23:23.44 | cr2 | put the right speed in setup, right port, and the "modem init string". |
| 23:23.49 | goxboxlive | is it more userfriendly? |
| 23:23.56 | cr2 | ncurses gui :) |
| 23:24.13 | cr2 | with lovely blue screen. |
| 23:27.03 | rob_w | now i am .. cr2 anything i can help with ? |
| 23:29.03 | goxboxlive | rob_w Do you know how i can disable the dbus-marshall in gpe? |
| 23:29.27 | rob_w | marshall ?? |
| 23:29.32 | goxboxlive | It refuse me to use gomunicator cuase of some famliar battery stuff lamikr have added the latest days |
| 23:29.34 | rob_w | what do you mean ? |
| 23:30.55 | rob_w | could be lamikr uses a depricated version of dbus .. i had a need of a configure patch for gomunicator to compile against a latest dbus |
| 23:31.08 | goxboxlive | When it tries to read some battery stuff i get segmention fault. I dont have gpe running now so i dont remeber the exactly message. |
| 23:31.30 | goxboxlive | Ok, it compiles but i geuss the problem is that i am using angstrom, and lamik is using familiar. |
| 23:31.49 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 23:32.20 | rob_w | i will give gomunicator some love and merge lamikr good stuff to the linuxtogo cvs |
| 23:32.56 | goxboxlive | line 37 -39 http://xanadux.cvs.sourceforge.net/xanadux/gomunicator/src/dbus.c?revision=1.9&view=markup |
| 23:33.25 | cr2 | goxboxlive: i dont't think the battery status command works on universal. |
| 23:33.46 | cr2 | btw, we can try to test all commands and gather the output. |
| 23:34.03 | goxboxlive | Now, but it should be disabled, but it crash. Ok, i have build minicom. |
| 23:35.54 | rob_w | i only have some minutes now ,, until one kid again throws up again .. we have some virus in the house .. so sorry me here |
| 23:36.02 | cr2 | run 'minicom -s' first. |
| 23:36.51 | goxboxlive | yes, i have a meny |
| 23:36.53 | goxboxlive | menu |
| 23:38.12 | cr2 | set port, speed and the modem init string. |
| 23:42.47 | goxboxlive | what is the modem ininitstring |
| 23:43.24 | *** join/#htc-linux florian (n=fuchs@87.193.4.53) |
| 23:45.50 | cr2 | htc_gsm wiki. |
| 23:51.27 | *** join/#htc-linux WizMaui_ (n=WizMaui@62.112.90.231) |
| 23:52.52 | *** join/#htc-linux TripleDES (n=sergio@89.129.143.241) |
| 23:55.27 | goxboxlive | root@htcuniversal:~$ minicom |
| 23:55.27 | goxboxlive | minicom: cannot open /dev/ttyS0: No such file or directory |
| 23:56.43 | rob_w | tts/0 maybe ? |
| 23:57.36 | goxboxlive | root@htcuniversal:~$ ls -la /dev/ttyS* |
| 23:57.37 | goxboxlive | crwxrwxrwx 1 root dialout 4, 64 Dec 5 20:50 /dev/ttyS0 |
| 23:59.13 | cr2 | hmm. dialout ? |
| 23:59.33 | cr2 | uucp.uucp ? |
| 23:59.58 | cr2 | are necessary for cu. |