| 00:00.33 | cr2 | lkcl: blueangel, but you can check your tiacxwln.dll for 01030505 constant. |
| 00:00.52 | cr2 | psokolovsky: i'm a bit away from this stuff right now :) |
| 00:01.18 | psokolovsky | cr2, nevermind, just consider me a supporter of static irq base now ;-) |
| 00:01.25 | lkcl | ack. |
| 00:04.27 | cr2 | hmm. this code it too convoluted for the hand disassembly ;) |
| 00:06.00 | psokolovsky | cr2, if you're about tiacxwln.dll, I wasted enough time of my life with it ;-) |
| 00:07.26 | cr2 | yes. it loads from 0x1004e3a4, but it does not belong to any segment according to the objdump. |
| 00:08.30 | cr2 | become tired now. good night. |
| 00:09.49 | lkcl | ok dude! |
| 00:10.06 | psokolovsky | Good night! |
| 00:17.47 | *** join/#htc-linux damien_ (n=damien@86.68.6.138) |
| 01:51.06 | lkcl | cr2 dude: hope you check logs / history. you might want to check whether you're running the ak4641 over the i2c bus or over the i2s bus... the pxa-ak4641.c code doesn't look like it's been compiled for a looonnngg time. the hw6915 uses the i2s bus. and it _only_ has, at the very start, if (!mach_is_4700) return -ENODEV; |
| 01:51.18 | lkcl | although it has #if CONFIG_MACH_HTCUNIVERSAL in it, it has that h4700 mach test at the top - so it would be hardly surprising if it didn't work. |
| 01:51.53 | lkcl | _plus_ - if it really _is_ accessible over the i2c bus, then the only device that's addressed over the i2c bus is device with address 0x0 |
| 01:53.19 | lkcl | huh. sound/i2c/ak4641.h seems to have gone walkabout!!! |
| 01:59.28 | lkcl | night people |
| 03:18.23 | *** join/#htc-linux psokolovsky (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 06:41.11 | *** join/#htc-linux asylumed (n=insanity@196.211.28.91) |
| 07:29.07 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 08:03.40 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 08:03.40 | *** topic/#htc-linux is HTC LINUX ! check also -> http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=BlueangelResearch | http://gnulinux.biz/files/ LOGS: at http://ibot.rikers.org/%23htc-linux/ |
| 08:18.00 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 08:18.00 | *** topic/#htc-linux is HTC LINUX ! check also -> http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=BlueangelResearch | http://gnulinux.biz/files/ LOGS: at http://ibot.rikers.org/%23htc-linux/ |
| 08:36.38 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 08:36.38 | *** topic/#htc-linux is HTC LINUX ! check also -> http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=BlueangelResearch | http://gnulinux.biz/files/ LOGS: at http://ibot.rikers.org/%23htc-linux/ |
| 09:04.53 | *** join/#htc-linux lamikr|lap (n=chatzill@dyn244-90.adsl.spy.dnainternet.fi) |
| 09:18.53 | *** join/#htc-linux pleemans (n=peter@d51A5E421.access.telenet.be) |
| 09:27.41 | goxboxlive | Anyone with a HX4700 around? |
| 10:01.01 | *** join/#htc-linux rob_w (n=bob@p85.212.167.161.tisdip.tiscali.de) |
| 10:01.54 | *** join/#htc-linux psokolovsky (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 10:06.33 | *** join/#htc-linux florian (n=fuchs@84.245.170.202) |
| 10:12.53 | goxboxlive | psokolovsky: What is the status on the HX4700. Is everything working now? Also touchscreen when using opie? The status page at hh.org wiki is kind of outdated i feel, so what is the status of the porting? |
| 10:14.39 | florian | hi all |
| 10:15.32 | goxboxlive | hi florian |
| 10:36.30 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 10:44.58 | *** join/#htc-linux LunohoD_ (n=alex@e180118176.adsl.alicedsl.de) |
| 11:03.51 | florian | bbl |
| 11:15.09 | *** join/#htc-linux pwr (n=pwr@82.78.120.186) |
| 12:15.25 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 13:31.25 | *** join/#htc-linux pleemans (n=peter@d51A5E421.access.telenet.be) |
| 13:35.08 | *** join/#htc-linux psokolovsky (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 13:41.06 | *** join/#htc-linux JTRipper86 (n=jtripper@p54B1EE30.dip.t-dialin.net) |
| 13:54.02 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 14:00.59 | *** join/#htc-linux rob_w (n=bob@p85.212.195.73.tisdip.tiscali.de) |
| 14:27.08 | cr2 | hi |
| 14:45.24 | Kevin2 | Hi |
| 14:48.44 | cr2 | Kevin2: what do you think about sound ? |
| 14:51.29 | Kevin2 | Last I looked at it, it was a mess. |
| 14:51.54 | cr2 | agreed ;) |
| 14:51.58 | Kevin2 | Someone on the hh kernel mailing list suggested using the also soc library. From the description, it sounded like what we want. |
| 14:52.07 | Kevin2 | I think ph5 said he was using it as well. |
| 14:52.23 | cr2 | he has uda1380 |
| 14:52.52 | Kevin2 | The framework is there, however, to use the ak chip. |
| 14:53.07 | cr2 | btw, i don't see nk.exe in \windows. do you have it ? |
| 14:53.10 | cr2 | ok. |
| 14:54.13 | Kevin2 | I have an nk.exe in \windows, but I don't think I can read it. |
| 14:54.28 | cr2 | hmm. |
| 14:54.55 | cr2 | you can read it in a sneaky way. |
| 14:55.27 | cr2 | i had it before, but after the repair, they updated wince and radio ;-) |
| 14:55.33 | Kevin2 | I'm all ears - I'd like to disassemble it. |
| 14:55.51 | cr2 | i'll test a haret patch now. |
| 14:56.16 | cr2 | do you know how to find the "\Storage Card" in a portable way? |
| 14:56.45 | cr2 | the name depends on locale. |
| 14:58.24 | Kevin2 | No. I just put all the interesting stuff in the same directory as haret. |
| 14:58.33 | Kevin2 | (The function fnprepare does that.) |
| 14:58.35 | cr2 | Kevin2: if you need it right now, take this one: http://hands.com/~lkcl/TestWM5.exe |
| 14:59.01 | cr2 | it will dump all visible files in \windows |
| 14:59.11 | cr2 | to \Storage Card\* |
| 14:59.18 | cr2 | Files and Modules |
| 15:02.08 | cr2 | the fnprepare & co. is not threadsafe, it seems. the program works on pxa, but crashes on omap after i have added the second listen thread. |
| 15:03.40 | Kevin2 | cr2: I don't see where fnprepare is non-threadsafe. It looks okay to me. |
| 15:04.02 | Kevin2 | But, yes, in general haret is definitely not thread-safe. |
| 15:04.52 | cr2 | ok. |
| 15:06.02 | cr2 | hehehe. it's wince filemanager cheating. |
| 15:06.06 | cr2 | found filenam nk.exe |
| 15:07.00 | cr2 | Kevin2: have you tried testwm5.exe ? |
| 15:15.38 | Kevin2 | No. How does it work? |
| 15:19.17 | cr2 | yes. |
| 15:31.45 | *** join/#htc-linux lamikr (n=chatzill@aragorn.kortex.jyu.fi) |
| 15:34.09 | Kevin2 | Hrmm. gnu-haret cpuGetCP is busted. |
| 16:29.46 | *** join/#htc-linux asylume1 (n=insanity@196.211.116.2) |
| 16:42.01 | cr2 | Kevin2: i can dump a good chunk of nk.exe, but then the program crashes. |
| 17:04.22 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.179) |
| 17:09.23 | cr2 | wooo. it's the last page making problems. radio rom 1.06 has more commands. |
| 17:10.32 | Kevin2 | psokolovsky: Are you around? |
| 17:10.40 | psokolovsky | Hi! |
| 17:11.40 | Kevin2 | Hi. |
| 17:11.49 | psokolovsky | Kevin2, what's up? |
| 17:11.50 | Kevin2 | I just got haret mainline compiling reliably on cegcc. |
| 17:12.03 | psokolovsky | Kevin2, Great news, thanks! |
| 17:12.12 | Kevin2 | Unfortunately, I need to patch cegcc headers. (I've sent a patch to the mailing list.) |
| 17:12.20 | psokolovsky | need to build cegcc myself finally (already checked out) |
| 17:12.59 | cr2 | Kevin2: *.bb ? |
| 17:13.04 | psokolovsky | Kevin2, hope they will be accepted quickly. guys are pretty active |
| 17:13.13 | Kevin2 | cr2: huh? |
| 17:13.25 | cr2 | bitbake file for OE. |
| 17:13.44 | psokolovsky | cr2: for haret? ;-) |
| 17:13.52 | Kevin2 | My experience with OE was very painful. I still cringe whenever I see those two letters next to each other. |
| 17:13.54 | psokolovsky | well, first add arm-wince-pe target itself ;-) |
| 17:14.25 | cr2 | LOL. |
| 17:14.34 | psokolovsky | Kevin2, stop repeating that palm guys' whining ;-) |
| 17:15.28 | cr2 | yes, it crashes when copying the last dll page. may be some off-by-one bug. |
| 17:16.05 | cr2 | LoadLibraryEx hmod=92d51284 \Windows\rilgsm.dll |
| 17:16.05 | cr2 | <PROTECTED> |
| 17:16.05 | cr2 | \Speicherkarte\Dump\Modules\rilgsm.dll: ptr=7f5d0000/01350000 size=274432 |
| 17:16.19 | cr2 | \Speicherkarte\Dump\Modules\rilgsm.dll: memcpy curr size=8192 |
| 17:16.19 | cr2 | \Speicherkarte\Dump\Modules\rilgsm.dll: write curr size=4096 |
| 17:16.19 | cr2 | Connection closed by foreign host. |
| 17:17.52 | psokolovsky | anybody known of asic3 device with keys having "active high" signals? |
| 17:19.03 | Kevin2 | psokolovsky: So, what do you think - should I check in and tag as 0.4.0? |
| 17:19.44 | psokolovsky | Kevin2, Checkin, sure, feel free to commit as you wish, please just don't kill old code ;-) |
| 17:19.57 | psokolovsky | Kevin2, as for tag, are we erally ready for release? |
| 17:20.10 | psokolovsky | Kevin2: QA, etc.? |
| 17:20.32 | psokolovsky | I guess, let it stay as HEAD, let's test it, etc. |
| 17:21.00 | psokolovsky | Kevin2, I didn't read your msg regarding release plan, sorry. will do soon |
| 17:27.13 | psokolovsky | Ok, so I'm adding support fot both "normal" and "inverted" keys to asic3_keys |
| 17:28.25 | cr2 | psokolovsky: at least this table is correct: http://wiki.xda-developers.com/index.php?pagename=UniversalASIC3 |
| 17:30.14 | psokolovsky | cr2, if I could grasp info I need from just look at it ;-) |
| 17:31.04 | cr2 | all buttons are active high and falling edge. |
| 17:31.14 | psokolovsky | well, FE means the keys a |
| 17:31.26 | psokolovsky | yeah ;-) |
| 17:31.29 | psokolovsky | nope |
| 17:31.30 | psokolovsky | ok |
| 17:31.52 | psokolovsky | so, wince registers depresses? |
| 17:32.44 | cr2 | you press, the signal goes 1->0, you get FE irq. |
| 17:33.41 | psokolovsky | cr2, so they are active low. (active as signalling, not neutral, state) |
| 17:34.14 | cr2 | ok. |
| 17:43.32 | cr2 | Kevin2: is there a 'wchar_t get_haret_wd()' function ? |
| 17:48.40 | Kevin2 | I'm not sure what you mean. The SourcePath variable is populated at haret startup. It stores the path of the haret exe. |
| 17:55.23 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-84-64.dynamic.mnet-online.de) |
| 18:07.13 | *** join/#htc-linux cr2 (n=konversa@crpl22.physik.uni-wuppertal.de) |
| 19:06.32 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 19:09.07 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 19:09.53 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 19:17.20 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 19:19.05 | cr2 | somebody with wince5 around? |
| 19:19.14 | *** part/#htc-linux WizMaui (n=WizMaui@62.112.90.179) |
| 19:20.05 | asylumed | cr2: yo? |
| 19:20.35 | cr2 | crashed again. |
| 19:21.41 | cr2 | asylumed: i have looked at the tiacxwln.dll from ba, and did not find the base address. |
| 19:21.57 | asylumed | cr2: :( |
| 19:22.41 | asylumed | where else to look then? |
| 19:23.27 | cr2 | try set trace /set tracemask |
| 19:23.40 | cr2 | i did not see anything, by YMMV. |
| 19:24.19 | asylumed | not too sure what that means... |
| 19:26.26 | cr2 | in haret |
| 19:26.32 | cr2 | set tracemask 0xffff |
| 19:27.08 | cr2 | set trace 0xac200000 |
| 19:27.21 | cr2 | maske the annoying irqs |
| 19:27.26 | asylumed | k... |
| 19:27.27 | cr2 | and run 'wi' |
| 19:28.03 | cr2 | here is a hint |
| 19:28.06 | cr2 | http://www.handhelds.org/moin/moin.cgi/ApachePhoneTrace |
| 19:29.39 | goxboxlive | hi guys. I got a H5500 from my brother. Wich Haret version should i try to boot linux from? Will the one we use with the universal work? |
| 19:30.04 | cr2 | goxboxlive: CPU ? |
| 19:30.32 | cr2 | Intel PXA255 |
| 19:30.53 | cr2 | standard haret. |
| 19:32.43 | goxboxlive | c2: I have no idea. I just got it in my hands. |
| 19:32.55 | goxboxlive | oK, I'LL TRY STANDARD hARET |
| 19:34.09 | Kevin2 | goxboxlive: You can also try my haret from svn. I don't think I've got anything pxa27x specific in it. |
| 19:34.39 | goxboxlive | Kevin2: Ok, i'll try out your version |
| 19:36.21 | Kevin2 | cr2: Apache uses wm5. |
| 19:39.18 | cr2 | strange, it crashes now, when i have replaced the hardcoded string. |
| 19:39.42 | cr2 | Kevin2: i'll upload my haret version, can you test it by running "lswin" ? |
| 19:42.19 | Kevin2 | Sure. Where do I pull from? |
| 19:43.11 | cr2 | http://jornada820.sf.net/files/haret |
| 19:44.29 | goxboxlive | kevin2: Your version will not start, it misses some libaries. |
| 19:44.35 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 19:46.11 | Kevin2 | Ah, okay. We need to get the bt and ril stuff using LoadLibrary. |
| 19:46.52 | cr2 | yes. wrap them to dlopen() and dlsym(). |
| 19:47.27 | Kevin2 | cr2: I wonder if dlltool can do that automatically.. |
| 19:48.07 | cr2 | don't think so. |
| 19:48.25 | cr2 | but i'm not a windows expert ;) |
| 19:48.46 | cr2 | the ril code can be better. |
| 19:49.19 | cr2 | use RIL_Dial, and not RIL_DevSpecific |
| 19:49.36 | cr2 | otherwise it works only on universal. |
| 19:50.00 | Kevin2 | I have no idea what the ril/bt stuff does - I just know it stops haret from running on some platforms. |
| 19:51.08 | cr2 | it's for tracing on/off hardware events |
| 19:51.51 | Kevin2 | Oh, that's neat - so you can control the functions while in a "wi"? |
| 19:51.57 | *** join/#htc-linux WizMaui_ (n=WizMaui@62.112.90.179) |
| 19:52.15 | Kevin2 | cr2: http://jornada820.sf.net/files/haret is not responding. |
| 19:52.34 | *** join/#htc-linux Fossi (n=Fossi@e176100165.adsl.alicedsl.de) |
| 19:52.39 | Fossi | hi all |
| 19:52.44 | Fossi | WizMaui_: here? |
| 19:53.55 | cr2 | Kevin2: yes, 'wi' or 'wasic3gpio' or whatever. there are also backlight,LCD and wifi functions. |
| 19:54.09 | cr2 | can't reach sf.net over http too ;) |
| 19:54.16 | Fossi | all: sorry, i know this is not really the right place to ask (again), but i'm trying to unscrew my prophet. does somebody know how to get the data (contacts, pictures) of there if only wifi works? phone doesn't, usb/activesync doesn't. don't have bluetooth |
| 19:55.04 | cr2 | Fossi: do you know the filenames ? |
| 19:55.30 | Fossi | cr2: not really. well, the pictures are easy to find actually |
| 19:55.45 | Fossi | didn't have much luck connecting to my samba share either though |
| 19:55.56 | cr2 | i have a haret version, that dumps everything in \windows |
| 19:55.56 | Fossi | but maybe at least i could somehow do ftp |
| 19:56.35 | cr2 | which is readable. the "unreadable" files need some debugging, but there are ROM files, so you don't care anyway. |
| 19:56.54 | Fossi | sorry for my ignorance, new to the whole thing, what exactly is haret actually? |
| 19:57.00 | cr2 | there is a wince ftpd (with source) |
| 19:57.14 | Fossi | ok found it |
| 19:57.15 | cr2 | HardwareReverseEngineeringTool |
| 19:57.15 | Fossi | nm |
| 19:58.26 | Fossi | thing is, i don't really want to mess with the lowlevel stuff as long as my phone still halfways works |
| 19:59.00 | Fossi | it's been acting really strange, so i'm not sure whether the problem is soft- or even hardware related |
| 19:59.39 | Fossi | so i though to backup, hard-reset and go to the shop before toying around and possibly screwing up my guarantee ;) |
| 20:02.58 | *** join/#htc-linux baud123 (n=baud@ver78-1-82-240-29-152.fbx.proxad.net) [NETSPLIT VICTIM] |
| 20:04.09 | Fossi | but that made me wonder where the contacts are stored, since the usb cable refuses to work :\ |
| 20:08.54 | Fossi | hmm. i guess if i had an sd card i could save to that... 'if' |
| 20:36.43 | *** join/#htc-linux psokolovsky (n=psokolov@234.usernat.ip.net.ua) |
| 21:07.33 | goxboxlive | psokolovsky is there a way to boot a h5500 using haret (not flashing the device)? |
| 21:08.04 | psokolovsky | goxboxlive, Hi! Sure, it is: try and report results ;-) |
| 21:08.43 | goxboxlive | But i am not sure about the content of startup.txt. |
| 21:08.59 | *** join/#htc-linux lamikr (n=chatzill@aragorn.kortex.jyu.fi) |
| 21:09.15 | goxboxlive | You see, i have a serial cable, but i dont have a serial port om my computers |
| 21:10.48 | *** join/#htc-linux JTRipper (n=jtripper@p54B1EE30.dip.t-dialin.net) |
| 21:21.34 | goxboxlive | cr2 / Kevin2 why arent you using a bootsplash for your haret versions? |
| 21:23.33 | Kevin2 | The penguin shown by the kernel? It takes up a large part of the apache screen -- it can hide useful diagnostic info. |
| 21:24.33 | goxboxlive | ok |
| 21:24.43 | goxboxlive | it looks cool thow :-) |
| 21:30.43 | Kevin2 | Are you referring to the penguin with the thermometer that haret shows, or the little penguin in the corner that linux shows? |
| 21:37.50 | goxboxlive | the big one with the thermometer. |
| 21:38.16 | goxboxlive | btw, how do i find the machines mtype? Is there a list somewhere? |
| 21:43.29 | cr2 | mach-types |
| 21:43.39 | cr2 | but i don't see h5500 there. |
| 21:44.25 | cr2 | H5400 220 |
| 21:44.30 | cr2 | the most close. |
| 21:44.33 | goxboxlive | how about h5550 |
| 21:44.36 | goxboxlive | ok |
| 21:45.40 | cr2 | http://www.handhelds.org/moin/moin.cgi/HpIpaqH5400 |
| 21:48.37 | goxboxlive | yes i have seen it, but i cant find any thing about booting using haret. It is only booting when you have flashed the bootloader. But i cant do that since i dont have a serial port. |
| 21:55.07 | cr2 | do you have a zimage ? |
| 21:55.36 | cr2 | hmm. still it's not that easy. |
| 21:58.28 | goxboxlive | yes i have downloaded one from familar 0.8.4 . |
| 22:01.04 | psokolovsky | goxboxlive, source of MTYPEs is list in kernel source |
| 22:01.26 | goxboxlive | ok thanks |
| 22:01.44 | psokolovsky | arm/.../tools/ iirc |
| 22:19.34 | *** join/#htc-linux pwr (n=pwr@82.78.120.186) |
| 22:41.15 | WizMaui_ | someone developing for omap850 (eg. prophet and wizard) ? |
| 22:45.11 | JTRipper | hey guys! got a question... i'm running linux on my prophet with mmc-support compiled in the kernel... but sometimes when booting with sd-card inserted it is ignored with an error and every now and then it is correctly recognized... can you tell me where the problem is, or maybe where it is not?! |
| 23:00.27 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.179) |
| 23:08.04 | *** join/#htc-linux ljp_ (n=lpotter@203.94.178.46) |
| 23:30.22 | WizMaui | no coder with htc wiz or prophet :( |