00:20.26 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
00:24.10 | *** join/#htc-linux awelux (n=awelux__@dslb-084-058-149-010.pools.arcor-ip.net) |
00:24.29 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
00:26.06 | BabelOued | cr2: ok, my old partiiton on sdcard boot under opie with a "return 0;" in place of write protect test :) |
00:29.41 | BabelOued | ok good night |
00:53.04 | *** join/#htc-linux toi (n=peter@d54C27365.access.telenet.be) |
02:17.09 | *** join/#htc-linux rob_w|dvd (n=bob@p213.54.203.70.tisdip.tiscali.de) |
06:00.43 | *** join/#htc-linux goxboxlive (n=goxboxli@85.167.156.134) |
06:10.28 | *** join/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-81-160.maa.sify.net) |
06:34.34 | *** join/#htc-linux lamikr|laptop (n=chatzill@dyn04-247.dsl.spy.dnainternet.fi) |
06:54.33 | cr2 | good morning |
07:03.11 | lamikr|laptop | cr2: Singning, What a beautifull morning, what a beautifull morning, ... |
07:03.46 | NickBee | good morning cr2 |
07:06.20 | NickBee | cr2: did you got my msg from last night? |
07:08.55 | cr2 | NickBee: which one ? |
07:09.27 | cr2 | lamikr: the weather is good :) i'd like to know how it will be in 2 weeks. |
07:09.55 | NickBee | :) A7 and B6 were the gpios when we did the USB test, remember that we tried to get the USB net working on my linux box |
07:10.23 | NickBee | that is when we traced these GPIOs i.e. these are not for TS |
07:10.26 | cr2 | yes. does USB work ? |
07:10.34 | *** join/#htc-linux awelux (n=awelux__@dslb-084-058-160-171.pools.arcor-ip.net) |
07:11.15 | NickBee | so have you already changed the USB code to hook up to gpio a7? |
07:11.30 | cr2 | yes. |
07:11.35 | NickBee | ah! |
07:11.46 | NickBee | ok, testing now ... |
07:11.49 | lamikr|laptop | cr2: Yes it has been very hot during the last two weeks in Finland (My holliday time)! Do you have holliday after 2 weeks in Germany? |
07:12.34 | NickBee | booting to linux |
07:12.35 | NickBee | brb |
07:12.38 | *** part/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-81-160.maa.sify.net) |
07:15.10 | cr2 | lamikr: i have a vacation starting in 2 weeks. i'll visit Sweden and Finland. |
07:32.09 | *** join/#htc-linux NickBee (n=dheeraj@dialpool-210-214-81-160.maa.sify.net) |
07:32.25 | NickBee | cr2: yes, i got connected to the hp-ipaq over usb now |
07:32.44 | NickBee | from my linux box |
07:33.09 | NickBee | booting linux on ipaq now... |
07:35.17 | NickBee | nope, after booting into linux, no USB |
07:35.21 | NickBee | connection |
07:36.05 | cr2 | lsusb ? |
07:38.29 | NickBee | http://pastebin.ca/89453 |
07:39.22 | NickBee | when ipaq boots wince, the usbnet is detected on device;003 |
07:39.36 | NickBee | when linux boots, that device is empty |
07:39.45 | cr2 | it is ok. |
07:40.09 | cr2 | you need to put the compiled modules to the miniSD card. hmm. |
07:40.24 | NickBee | Ok |
07:40.50 | cr2 | but then you need to compile the kernel yourself. |
07:40.51 | NickBee | from where can i get the required modules? |
07:40.58 | NickBee | k |
07:41.23 | NickBee | where can i read about compiling the kernel for ipaqs? |
07:41.24 | cr2 | i'll put my changes into hh.org CVS now. |
07:41.27 | NickBee | hh ? |
07:41.32 | NickBee | k |
07:41.34 | cr2 | handhelds.org |
08:28.02 | goxboxlive | good morning |
08:31.18 | NickBee | good morning Gox |
08:34.43 | goxboxlive | NickBee do you have a working TS? |
08:37.55 | cr2 | hi goxboxlive |
08:38.07 | goxboxlive | hi there |
08:39.17 | cr2 | i see a lot of random strange things. |
08:39.59 | cr2 | the asic3_mmc driver on blueangel insists that all cards are readonly. |
08:40.14 | goxboxlive | ok |
08:41.18 | NickBee | Hi, not yet, work in progress :) |
08:41.18 | cr2 | the i2c-pxa module is not referenced by snd-htcuniversal-audio, and i get an oops doing 'od -x /dev/dsp' deep in the i2c code. |
08:41.42 | goxboxlive | ok |
08:42.17 | cr2 | if i boot in portrait mode, opie acknowledges that, the background pixmap is wrong, but the most funny is that the touchscreen is not working. |
08:43.00 | goxboxlive | realy? I am allways booting in landscape mode. |
08:43.13 | cr2 | if i don't clean /dev before boot, funny things happen. |
08:43.24 | goxboxlive | hmm |
08:43.35 | cr2 | udev complains about inotify, but it is in the kernel. |
08:44.36 | cr2 | for example, if /dev is cleaned, 'ifup usb0' was called. if not i don't get working usb login. |
08:45.07 | goxboxlive | i know, i dont know why it does. I have also cheked the .config. I have no idea why it complaines about it. I have also looked in the udev rules but i havent seen nothing about it. |
08:45.45 | goxboxlive | Yes, it seems like networking starts auto only at the first boot, the next boot you have to start it by ifup. |
08:48.10 | goxboxlive | I have started to build allmost the same as hx4700 now. Using their bb file instead of the handhelds-un. It is working right out of the OE, also the zImage, but i have problems with BT, it woulndt start. I had the same issue with IRDA,, but that is working now. |
08:50.42 | cr2 | inotify is a wrapper around a kernel syscall. hmm. |
08:51.04 | cr2 | #elif defined (__arm__) |
08:51.04 | cr2 | # define __NR_inotify_init 316 |
08:51.04 | cr2 | # define __NR_inotify_add_watch 317 |
08:51.04 | cr2 | # define __NR_inotify_rm_watch 318 |
08:53.50 | cr2 | do you have /proc/sys/fs/inotify/ ? |
08:55.15 | rob_w | re .. so how far are we .. are we finished now ,, can we buy new pda`S ????? |
08:56.51 | cr2 | rob_w: asic3_mmc says all cards in the ba are readonly. if this is switched off, then it boots. |
08:57.05 | rob_w | readonly .. hm |
09:00.19 | rob_w | mmc_block.c : /* |
09:00.19 | rob_w | <PROTECTED> |
09:00.19 | rob_w | <PROTECTED> |
09:00.19 | rob_w | <PROTECTED> |
09:00.19 | rob_w | <PROTECTED> |
09:00.24 | cr2 | goxboxlive: if i restart udev on a running machine it does not whine about inotify. |
09:00.40 | cr2 | and it should not be. |
09:00.50 | cr2 | mmc_blk_readonly ? |
09:00.51 | rob_w | that indicates that it doesnt detect the "write feature " |
09:00.52 | goxboxlive | ok, so what do i have to do to get rid of the boot message? |
09:01.05 | cr2 | goxboxlive: don't know. |
09:01.11 | goxboxlive | :-) |
09:01.33 | cr2 | rob_w: but it is the same driver as on universal et al. |
09:01.46 | rob_w | hmm |
09:02.19 | cr2 | <PROTECTED> |
09:02.19 | cr2 | <PROTECTED> |
09:02.29 | rob_w | aha |
09:03.38 | cr2 | #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) |
09:03.41 | rob_w | where is that ? |
09:03.53 | cr2 | include/linux/mmc/card.h |
09:04.10 | rob_w | cd .. |
09:05.08 | cr2 | need to printk card->state and card->csd.cmdclass |
09:08.50 | cr2 | cmdclass comes directly from the card response. |
09:31.28 | cr2 | state=24 cmdclass=501 |
09:37.27 | cr2 | 24 means 16+8 "card is read-only"+"is an SD card" |
09:38.03 | *** join/#htc-linux dmd (n=d@213.78.209.47) |
09:38.19 | dmd | Hi! |
09:39.45 | dmd | I've read Linux on the uni can only use up to 1GB SD cards- why is this when I've heard people have got 4GB cards working on the Zaurus and I can read/write 4GB SD cards under Linux on my PC no prob |
09:41.11 | cr2 | it is not true now. zaurus uses pxa mmc/sd controller, and uni - asic3. |
09:41.22 | dmd | hi cr2 |
09:41.35 | dmd | so 4GB cards work now then? |
09:41.58 | cr2 | 2GB was tested. |
09:42.05 | dmd | cool |
09:42.09 | cr2 | just try it. |
09:42.46 | cr2 | CCC_BLOCK_WRITE is active... wtf has set "card is read-only" |
09:42.59 | dmd | I've heard most of the uni hardware is now working but not GSM/GPRS- what is the status of the phone under Linux? |
09:45.58 | dmd | Any chance of getting this working soon or is there a lot more work to get it working |
09:47.03 | cr2 | don't know. voice and sms can be relatively easy. |
09:47.21 | cr2 | static int |
09:47.25 | cr2 | mmc_get_ro(struct mmc_host *mmc) |
09:47.25 | cr2 | { |
09:47.26 | cr2 | <PROTECTED> |
09:47.27 | cr2 | <PROTECTED> |
09:47.27 | cr2 | <PROTECTED> |
09:47.27 | cr2 | } |
09:48.14 | dmd | well thats all i'm really bothered about is making/receiving calls and mms really |
09:48.26 | cr2 | why does this work on all other asic3_mmc devices, but not on blueangel. |
09:48.27 | dmd | sorry, sms |
09:48.28 | cr2 | mms ? |
09:48.32 | cr2 | ok. |
09:49.27 | cr2 | it's all about sending ATD and ATA over serial interface. |
09:49.30 | goxboxlive | dmd : http://www.handhelds.org/moin/moin.cgi/UniversalStatus |
09:49.37 | cr2 | but there are some nasty details. |
09:49.57 | dmd | goxbox: been there, thanks |
09:50.46 | dmd | I might be buying a xda exec today but I really want it to run GPE but I'd need the phone to work |
09:50.58 | goxboxlive | but if you read it you will see that it support SD up to 4GB |
09:50.59 | dmd | eventually :) |
09:51.38 | dmd | goxbox: didn't notice |
09:53.29 | dmd | any progress been made with the power management lately? |
09:53.36 | cr2 | hahaha. |
09:53.40 | cr2 | static int |
09:53.44 | cr2 | mmc_get_ro(struct mmc_host *mmc) |
09:53.48 | cr2 | { |
09:53.52 | cr2 | <PROTECTED> |
09:53.56 | cr2 | #if 0 |
09:54.00 | cr2 | <PROTECTED> |
09:54.04 | cr2 | <PROTECTED> |
09:54.04 | cr2 | #endif |
09:54.04 | cr2 | <PROTECTED> |
09:54.05 | cr2 | } |
09:54.07 | cr2 | this is in the .12-ba0 branch. |
09:55.21 | cr2 | dmd: it's easy. somebody just need to do the work. |
09:55.47 | dmd | thats good to hear |
09:56.31 | cr2 | maybe that's the reason why blueangel has a sd_ro asic3 gpio pin. |
09:57.01 | dmd | has no-one tested the camera? The driver is in the kernel now right? Is it a software problem (what prog would you use to take a pic)? |
09:59.03 | dmd | and is there a linux prog that would be able to record mpeg4 vids on the uni? |
09:59.31 | cr2 | there is no 2.6 driver. but there is 2.4 and you need to pull right gpios. |
10:00.26 | dmd | why does it say on that page that goxboxlive just linked to that a driver for the external camera is in 2.6.16? |
10:00.34 | cr2 | if you will have enough cpu power to do it. it is just grabbing /dev/fb1 snapshots and compressing them. nothing magic. |
10:01.13 | goxboxlive | dmd: for Motorola A780 |
10:01.24 | cr2 | where ? |
10:01.52 | goxboxlive | In the status page, but it says that it is in the a780 source. |
10:02.05 | dmd | so is that the same camera as in the uni? if not then why mention it? |
10:02.11 | cr2 | hmm. maybe. but i doubt anybody has tested it. |
10:03.02 | cr2 | dmd: because there is a working driver for it. and no documentation from OV, btw. |
10:03.19 | dmd | so its the same camera? |
10:03.38 | goxboxlive | wcr2 write me a dribver and i'll test it. Same goes for powermanagment. |
10:04.49 | cr2 | you need to understand the purpose and timing of gpios. it's the same for the phone. |
10:07.18 | dmd | so by the sounds of things no-one has wrote any PDA camera software for GPE or Linux. I wonder if mencoder would be able to compare well with the Windows Mobile movie camera app (if someone made a GUI for doing it of course) |
10:08.46 | cr2 | dmd: the same for the phone. |
10:10.08 | dmd | nope http://www.handhelds.org/moin/moin.cgi/Gomunicator |
10:10.32 | dmd | get that phone working cr2 :) |
10:12.06 | cr2 | it's only for gpe, and it's gui quality is, hhmmm. |
10:12.23 | dmd | i'm only bothered about gpe |
10:12.47 | dmd | GNOME/GPE/GTK has all the best FOSS apps IMO |
10:13.03 | cr2 | then do it. |
10:13.38 | dmd | :) |
10:13.59 | dmd | ok, give me 5 years to learn kernl hacking and then |
10:14.03 | cr2 | i dislike gnome. and mono even more. gtk documentation is horrible to read. |
10:14.15 | cr2 | you don't need any kernel hacking to write a gui. |
10:15.01 | dmd | I was on about kernel support for the uni phone, which is what gomunicator needs right? |
10:15.27 | cr2 | so it's a matter of taste. i'm not a big fan of c++, but qt is quite ok. |
10:15.42 | cr2 | you can improve the gui without any kernel support :) |
10:16.18 | dmd | but KDE is too bloated for a 64MB RAM machine and Qtopia has hardly any decent apps |
10:16.18 | cr2 | there are other phones where gomunicator works. |
10:16.48 | dmd | That have VGA screen and a keyboard- tell me! |
10:17.02 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
10:17.11 | cr2 | i need a phone app and a gps route planner. the first is missing , but a780 has it, and i'm working on the second. |
10:17.37 | cr2 | thank micros~1 for 64MB. my blueangel has 128. |
10:18.00 | dmd | cr2: you do have a uni as well right? |
10:18.37 | cr2 | i'd like uni to have all that a780 has, and without any binary-only crap. |
10:18.47 | cr2 | yes. and a780 with gps too. |
10:19.14 | BabelOued | hi |
10:19.17 | BabelOued | hi cr2 |
10:19.45 | cr2 | hi BabelOued. i have found the reason for (ro) |
10:20.02 | BabelOued | yes, it work on mine |
10:20.09 | cr2 | this function was commented out in .12 |
10:20.17 | BabelOued | i post a message yestuday after your good night :) |
10:20.30 | cr2 | can you check the ro asic3 gpio ? |
10:20.59 | cr2 | then we can add it to the driver. it is good to have ro support. |
10:21.27 | BabelOued | cr2: no, i've only mage a tmp patch for moment to test |
10:22.18 | BabelOued | :q |
10:23.05 | BabelOued | there is a #define called DONT_CARE_CARD_BITS in asic3_mmc.h |
10:23.54 | cr2 | well, you don't want to write to a readonly card. |
10:24.21 | cr2 | if gpio works, then it is a right fix. |
10:24.47 | BabelOued | cr2: no,i've to find how it work and which bit is bad interpreted by MMC as readonly |
10:40.35 | BabelOued | cr2: on uni have you made some modification to have mmc working ? |
10:40.46 | BabelOued | i fonug this define #define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7) |
10:41.04 | BabelOued | but it is a reference to mmc host |
11:17.18 | BabelOued | cr2: ok USB network works, bad configuration from htcblueangel_config |
13:54.55 | rob_w | cr2, good job |
14:25.33 | *** join/#htc-linux fimbulvetr (n=danv@24.220.28.74) |
15:16.03 | *** join/#htc-linux fimbulvetr (n=danv@24.220.28.74) |
15:19.40 | *** join/#htc-linux g3gg0 (n=g3gg0@ppp-82-135-82-36.dynamic.mnet-online.de) |
16:52.09 | *** join/#htc-linux zeano` (n=zero@82-33-0-231.cable.ubr13.newt.blueyonder.co.uk) |
18:32.00 | *** join/#htc-linux florian (n=fuchs@p5083948F.dip0.t-ipconnect.de) |
18:32.19 | florian | hi all |
18:34.53 | BabelOued | hi florian |
18:38.56 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
19:07.34 | goxboxlive | cr2 are you there? |
19:12.04 | florian | goxboxlive: i pushed a fixed -hh4 bb to .dev some days ago... did you manage to make a diff from your stuff against the oe tree? |
19:13.41 | goxboxlive | hi florian, i can make a diff now, but i have started to use the handhelds-pxa-2.6_cvs.bb files instead. It seems like the Images is getting bether tan with the one i have made my self :-) . I will send you a diff later today. |
19:36.07 | goxboxlive | florian monotone diff sent |
19:46.32 | florian | goxboxlive: cool, many thanks |
20:40.41 | *** join/#htc-linux rob_w (n=bob@p213.54.203.70.tisdip.tiscali.de) |
20:42.13 | rob_w | hey guys .,. how is our status on a htc wizard ? |
20:42.23 | *** join/#htc-linux lamikr|laptop (n=chatzill@dyn04-247.dsl.spy.dnainternet.fi) |
20:43.55 | BabelOued | hi rob_w |
20:44.55 | BabelOued | any progress with tsc2200 driver ? |
20:48.27 | rob_w | nothing productive yet |
20:51.25 | BabelOued | if we are luck with 2.6.16 kernel acx driver works withminor modification |
20:52.05 | rob_w | ah i see taht the tsc2200 in .16 is not uptodate compared to the .12 |
20:54.49 | *** join/#htc-linux toi (n=pleemans@d5152D12D.access.telenet.be) |
20:58.55 | rob_w | BabelOued, did you test the fix for read/write mmc yet ? |
21:00.19 | BabelOued | i only do same thing that on .12 kernel |
21:00.44 | BabelOued | return 0 in mmc_get_ro funciton and it works |
21:00.52 | BabelOued | for the moment |
21:02.11 | *** join/#htc-linux davidchow (n=davidcho@cm203-168-216-8.hkcable.com.hk) |
21:02.32 | davidchow | Hi all |
21:02.50 | rob_w | hey davidchow |
21:03.10 | davidchow | I have been looking for someone working on the HTC Universal . |
21:03.51 | florian | there are quite some here :-) maybe don't ask lpotter ;) |
21:03.59 | davidchow | I got the latest 2.6.16 opie installed on mine . GPE with no sucess . |
21:04.36 | rob_w | florian, do you know details about pxa_ssp compared to ssp in the hh.org kernels ? |
21:04.57 | davidchow | Having lots of TS issues. Even on OPIE . If auto start of opie thru init, the opie will have TS problem. If start by manual (interrupt on start) "/etc/init.d/opie start" will work . |
21:05.13 | florian | rob_w: not really |
21:05.22 | davidchow | I don't know the details, just started to test it. |
21:05.27 | florian | davidchow: what went wrrong with gpe? |
21:05.32 | davidchow | TS |
21:05.48 | davidchow | TS has no response at all. |
21:05.53 | florian | ah i see, yes... looks like you need to ship a /etc/pointercal |
21:07.05 | davidchow | What do you mean? You mean create such a file manually ? But I find I cannot stop GPE GUI from loading. I dont use GPE at all, I just test to boot it and see results. But "no good" so far. |
21:08.12 | rob_w | davidchow, did you try to run caibration by hand , yet `? |
21:08.28 | davidchow | Not yet . Did have a chance to dig GPE out. |
21:08.43 | davidchow | I mean, "I didn't have a chance". Sorry for typo . |
21:09.41 | davidchow | I just got the phone for one week, took me hell a lot of time to import my address book to WM5.0 . Outlook sucks. |
21:10.29 | davidchow | Does anyone own a Sharp Zaurus here? If yes, then you should have a go with it. Feel about a full functional Linux PDA and notice the differnence. But Zaurus don't sync with Linux well, but at least can tweak and work with Evolution . |
21:13.12 | rob_w | hehe |
21:14.21 | davidchow | Well, I personally owns a Sharp Zaurus for many years . That's the stuff which make me starts with Linux PDA 's . |
21:15.19 | davidchow | I think it was great! But the bad thing is it is lacking of a phone. |
21:15.46 | *** join/#htc-linux BoSJo (n=bosjo@130.80-203-23.nextgentel.com) |
21:16.08 | davidchow | One of my goal prior buy a HTC Universal is to make it to run OPIE/GPE Linux with phone support. I aim to replace my Zaurus hw with the same and more advanced sw . |
21:17.15 | florian | davidchow: you can grab one from the ready-made images |
21:17.31 | goxboxlive | florian, i have booted a new build GPE image: Here is the status |
21:17.40 | florian | davidchow: looks like the config tool in .dev is still broken |
21:18.14 | davidchow | florian, what do you mean? Still broken? But why many people have success and didn't have a TS complain? I am curious . |
21:19.17 | florian | davidchow: i'm not sure... last time i tried xtscal segfaulted. maybe we trigger this bug somehow. |
21:19.26 | davidchow | I am now suspecting people are upgrading from 2.6.12 to 2.6.16 (the hh image) such that it is not a vanilar image downloaded from the web. For me, I wiped up everything and start from scratch many times. Yes, it is broken. |
21:21.00 | davidchow | I heard we only have cr2 as the only developer here for Universal . I am not sure if he is the only one . Any others doing devel work? |
21:21.01 | rob_w | h,mmm |
21:21.17 | rob_w | so now all tsc stuff from .12 compiles under .16 .. |
21:21.26 | goxboxlive | Bluetooth doesnt work , it starts BT with 'hciattach -n /dev/ttyS1 texas 921600' . The "highg speed" isent stable enough, so i think 115200 should be the default one. |
21:22.01 | goxboxlive | The "look and Feel" doesent start. |
21:22.31 | florian | goxboxlive: does it start if you start it from the menu instead of the desktop? |
21:22.39 | goxboxlive | As you allready know, calibration doesnt work. |
21:22.47 | goxboxlive | hold on let me try |
21:22.49 | davidchow | goxboxlive, I use OPIE, use BT manager, UI worked correct and can discover others but no connection tried. |
21:22.53 | goxboxlive | ACtually it should |
21:22.56 | rob_w | goxboxlive, did you use a hciattach supporting high speed ( as rob_w thinks there was a patch ) |
21:23.08 | BabelOued | rob_w: all tsc stuff ?! nice :) |
21:23.51 | rob_w | ok so letme taste this now .. all i need is to commennt out the readonly check on mmc , right ? |
21:24.14 | BabelOued | yes |
21:24.23 | BabelOued | replace with return 0 |
21:24.41 | rob_w | will usb serial stable when build into the kernel ? |
21:24.58 | BabelOued | yes, i use it built in |
21:25.09 | BabelOued | no problem |
21:25.27 | BabelOued | but coorect cmdline to boot is |
21:25.40 | BabelOued | root=/dev/mmcblk0p2 for me |
21:26.08 | davidchow | Who is incharding the universal-linux project now? Or none? |
21:26.37 | goxboxlive | florian, yes it start with 'hciattach /dev/ttyS1 texas 115200' . The 921600 is unstable, and should be up to users if they want to use it or not for now i think |
21:26.47 | rob_w | davidchow, to blame some one ..? |
21:27.15 | goxboxlive | davidchow: I know, it works with Opie. |
21:27.37 | florian | goxboxlive: ah no, i meant look&feel |
21:27.43 | davidchow | No, I don't like blame . I just think we should do a proper project management and reduce confusion and saying "a patch some day", I can't even locate what is going on with what patch here. |
21:28.41 | goxboxlive | rob_w : Yes there is a patch, but with OE it aplies automaticly. To start with the patch ytou have to use: hciattach -S /path to script/ /dev/ttyS1 texas' THat will support 921600 |
21:28.51 | rob_w | BabelOued, which file was the function again ? |
21:29.18 | goxboxlive | florian: No, it's the same form menu as desktop. |
21:29.38 | florian | hrm |
21:29.56 | florian | goxboxlive: what does "gpe-conf theme" say? |
21:30.05 | goxboxlive | florian.. I also think we should get the fonts a little bigger. maybe size 14 or 16 out of OE |
21:30.57 | rob_w | BabelOued, in which mmc file was that agaoin ? |
21:31.11 | florian | goxboxlive: yes, that might be good |
21:31.42 | goxboxlive | florian: "gpe-conf theme" says: glibc detected, **** gpe conf free() : invalid pointer 0x00086bf0 *** |
21:32.52 | florian | oops |
21:33.35 | florian | anyway... i removed a lot of crap from this module - i just need to get it released. |
21:33.54 | BabelOued | rob_w: drivers/mmc/asic3_mmc.c |
21:33.58 | BabelOued | mmc_get_ro(struct mmc_host *mmc) |
21:35.10 | rob_w | got it |
21:35.30 | goxboxlive | davidchow: We dont use any patches now. I built a image working right out of OE without aplying any pathces before booting. So we are realy on our way. But there are a lot of stuff that's still unsolved. But as i said to you in the forum, there are only one guy who builds drivers for the Universal, and he is also helping out guys with other devices so it takes time. But if you have the skiulls you are welcome to join him i guess. |
21:35.44 | goxboxlive | florian: good |
21:46.18 | rob_w | ok so my first try in booting .16 resulted in "red eyes only " |
21:47.48 | BabelOued | on my BA it take more time than with 2.6.12 kernel , but i use another haret |
21:48.40 | rob_w | another haret ? |
21:49.14 | rob_w | which one ? |
21:49.55 | BabelOued | yes i use haret from cr2 ( you don't need to reboot BA after use) and standard haret of universal |
21:50.30 | rob_w | so witch which on can you boot the .16 ? |
21:52.24 | BabelOued | i'm looking for on IRC log a message from cr2 |
21:53.41 | BabelOued | rob_w: here http://jornada820.sf.net/files/haret |
21:53.42 | rob_w | ok |
21:54.25 | BabelOued | with this one, you can make test and doesn't need any reboot |
21:55.05 | rob_w | and did it boot your 2.6.16 ? |
21:55.47 | BabelOued | rob_w: i m trying it into another card |
21:57.06 | rob_w | this harte doesnt support the "bootlinux" command |
21:57.12 | rob_w | s/harte/haret |
21:57.37 | BabelOued | it works |
21:58.00 | BabelOued | it's boot2 command, you don't have red eyes |
21:58.29 | BabelOued | you want my zImage ? maybe it's a difference between our BA |
21:58.40 | rob_w | no i want mine to boot |
21:58.45 | BabelOued | ok |
21:59.25 | rob_w | so you say the harte boot command changed from "bootlinux" into "boot2" ?? in default.txt ? |
21:59.44 | BabelOued | yes |
21:59.55 | rob_w | fascinating |
22:00.00 | BabelOued | you have a blue line and after a red line |
22:00.45 | rob_w | u didnt saw kernel out put yet of the 2.6.16 ? |
22:00.54 | BabelOued | for my first test i use all files from universal and only modify initrd file and zImage |
22:01.21 | *** join/#htc-linux goxboxlive_ (n=goxboxli@ti500710a080-7302.bb.online.no) |
22:01.35 | BabelOued | i see kernel output on .16 |
22:01.53 | BabelOued | i can boot to OPIE without TS and KP |
22:03.23 | BabelOued | i remove my first modification and make a cvs update to get modif from cr2 on hh.org |
22:06.55 | rob_w | BabelOued, did you get past the red line ? |
22:07.05 | rob_w | with your lcd.c file you send me ?? |
22:07.17 | BabelOued | yes |
22:08.20 | BabelOued | if you want take blueangel_lcd.c from cr2, i put it on my ftp ? |
22:08.35 | rob_w | hmm .. ok |
22:09.33 | BabelOued | it's ok |
22:09.38 | BabelOued | on ftp |
22:10.35 | BabelOued | no a problem |
22:11.34 | rob_w | thanks yeah that looks different again |
22:14.03 | rob_w | ok, keep fingers crossed |
22:14.31 | BabelOued | ok i do it :) |
22:14.53 | rob_w | hmm ..still |
22:15.31 | BabelOued | i don't understand difference |
22:15.40 | rob_w | hang on |
22:16.30 | goxboxlive_ | rob_w we had ha problem with our Universal that it wouldnt boot if we didnt have the phone on. It freezed at the red line when the device where in "flight-mode" |
22:16.41 | rob_w | oh |
22:17.09 | rob_w | i was was in flight mode so to speak |
22:17.19 | BabelOued | goxboxlive : on mine i don't have sim card into it, i think it s in fly mode by default |
22:17.32 | goxboxlive_ | ok |
22:18.23 | rob_w | i had issues with such even before .. but i thouhg it had to do with how much apps wince already had opened |
22:18.38 | BabelOued | goxboxlibewhat is default IP adress in OPIE ? |
22:18.39 | rob_w | ok i will try again after entring my gsm pin |
22:19.03 | goxboxlive | usb? |
22:19.09 | BabelOued | goxboxlive: yes |
22:19.11 | goxboxlive | 192.168.0.202 |
22:19.39 | goxboxlive | gw = *.*.*.200 |
22:20.11 | BabelOued | ok thanks |
22:20.49 | BabelOued | i 've BA on same network thaht my router sa i use route add 192.168.0.202 gateway 192.168.0.201 |
22:22.42 | rob_w | BabelOued, which board id do you had ?` |
22:22.55 | goxboxlive | <BabelOued> The IP adress has also been 206 instead of 202. But it seems like the lately it has been 202. |
22:23.30 | BabelOued | goxboxlive: thanks it work, adress change under OPIE by default |
22:23.36 | BabelOued | rob_w: Blue Angel Board ID 0x5 |
22:23.42 | BabelOued | rob_w: from dmesg |
22:24.35 | BabelOued | rob_w: i 've made a little compile of tsc2200 and i have this two message if it can help you |
22:24.39 | BabelOued | Register NSSP bus ... done. |
22:24.39 | BabelOued | tsc2200_init: 10F/80. |
22:24.39 | BabelOued | Register TSC2200 driver ... done. |
22:24.39 | BabelOued | tsc2200_init: 10F/80. |
22:25.34 | rob_w | wow |
22:27.01 | rob_w | BabelOued, that looks promising .. |
22:27.37 | BabelOued | rob_w: i don't know, but no working under opie .. :( |
22:28.15 | goxboxlive | <BabelOued> Have you tried with ts_calibrate? |
22:28.28 | BabelOued | goxboxlive: no |
22:29.08 | goxboxlive | We have some problems sometime with the TS. But it allways works with ts_calibrate or ts_test. Do you have the apps? |
22:29.31 | goxboxlive | http://gnulinux.biz/files/Universal/tmp/ts_calibrate/ |
22:29.48 | rob_w | BabelOued, so the blueangel_lcd.c which i just downloaded is the one you used to compile and boot , right ? |
22:29.58 | rob_w | or did you had changes to this on ? |
22:30.01 | BabelOued | rob_w: yes |
22:30.05 | goxboxlive | change to init 3 in inittab and try to run it form the shell |
22:31.51 | rob_w | ok then i ve a problem here |
22:35.10 | BabelOued | rob_w: what is /dev entry for TS ? |
22:35.39 | rob_w | should be /dev/input/event0 or 1 |
22:37.10 | BabelOued | ok i 've no /dev/input |
22:39.03 | rob_w | u need to have any form of tsc2200 and ts3 (aka himalay_ts3 ) loaded .. and evdev |
22:39.40 | BabelOued | rob_w: ok i don't have ts3 loaded :( |
22:39.49 | rob_w | i bet |
22:40.01 | rob_w | i was working on this .. |
22:40.29 | rob_w | hang on i see a struct w100_mode blueangel_w100_modes_4 but nothing for board id 5 `,s |
22:41.43 | BabelOued | yes screen blink a little |
22:42.25 | BabelOued | i put my zImage on ftp, if you want to try, only to know if it is cvs problem or another |
22:42.34 | rob_w | i remeber that i had differnt values for those modes even compared to cp15 .. but he knew the trick |
22:42.40 | rob_w | ok |
22:46.19 | rob_w | hmm there is one mode item which is now not used anymore for board 5 |
23:01.31 | rob_w | damn .. still stuck .. |
23:02.21 | BabelOued | don't work with my zImage ? |
23:02.21 | rob_w | didnt try yet |
23:02.21 | rob_w | will do now |
23:02.35 | BabelOued | ok |
23:04.51 | rob_w | hmm |
23:05.13 | rob_w | ok that one works now .. |
23:05.15 | rob_w | damn |
23:05.33 | BabelOued | ok |
23:05.52 | BabelOued | maybe a cvs problem |
23:06.28 | BabelOued | you activate w100fb ? |
23:06.56 | BabelOued | and remove pxafb ? |
23:08.07 | rob_w | yesd |
23:11.38 | rob_w | i bet this is again a gcc version problem on my side .. |
23:12.20 | BabelOued | i use gcc 3.4.1 i think, cr2 say it is better |
23:12.43 | rob_w | i use gcc 3.4.4 even |
23:13.41 | BabelOued | yes it is arm-linux-gcc-3.4.1.tar.bz2 for me |
23:47.35 | BabelOued | good night |
23:52.32 | florian | good night |