00:26.00 | *** part/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
00:27.34 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
07:10.31 | *** join/#htc-linux awelux (n=awelux__@dslb-084-058-163-207.pools.arcor-ip.net) |
07:30.14 | *** join/#htc-linux goxboxlive (n=goxboxli@ti500710a080-7302.bb.online.no) |
07:45.49 | *** join/#htc-linux lamikr|laptop (n=chatzill@dyn04-247.dsl.spy.dnainternet.fi) |
09:02.05 | *** join/#htc-linux pH5 (n=ph5@p54866C0C.dip.t-dialin.net) |
09:45.11 | *** join/#htc-linux goxboxlive_ (n=goxboxli@ti500710a080-7302.bb.online.no) |
10:41.58 | *** join/#htc-linux g3gg0 (n=g3gg0@ppp-82-135-13-182.dynamic.mnet-online.de) |
10:53.46 | *** join/#htc-linux rob_w (n=bob@p213.54.212.59.tisdip.tiscali.de) |
11:48.53 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
12:07.55 | rob_w | 2.6.16 : after some comments and adding includes , now tsc2200 builds outside the himalaya dir .. |
12:07.57 | rob_w | bbl |
12:08.15 | BabelOued | hi rob_w |
12:39.18 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
13:13.51 | cr2 | goxboxlive: you here ? |
13:48.46 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
13:55.53 | *** join/#htc-linux florian (n=fuchs@p50838274.dip0.t-ipconnect.de) |
13:56.46 | *** join/#htc-linux BoSJo (n=bosjo@130.80-203-23.nextgentel.com) |
13:59.01 | goxboxlive | cr2 yes |
14:03.28 | cr2 | | ERROR:konq-embed/add-ons/pppdialer/pics/Makefile.am: nested automake conditionals (XMLUI vs. LARGEICONS) |
14:04.02 | cr2 | it also downloads and builds qt-embedded-3.3.5 ??? |
14:04.32 | cr2 | i'm lost in this qt-e versioning hell ;) |
14:05.40 | cr2 | i have tried to boot blueangel with your opie, but it does not want to mount root. |
14:06.27 | cr2 | the /dev/ is filled with some stuff, but the mmcblk0* is not there, but some outdated stuff like ttySA0 is present... |
14:08.12 | BabelOued | hi cr2 |
14:09.29 | cr2 | hi BabelOued. i have read about w100fb in the logs and changed the hh.org CVS code. now it works. |
14:09.49 | BabelOued | ok |
14:10.11 | BabelOued | works fine but the screen blink a little |
14:10.21 | cr2 | yes. |
14:10.41 | cr2 | we need to dump the w100 registers and compare them with wince values. |
14:10.57 | BabelOued | ok |
14:11.42 | BabelOued | Do you have a working opie or gpe image with 2.6.16? |
14:12.08 | BabelOued | mine doesn t work |
14:12.57 | cr2 | i could not boot because of the missing /dev/ nodes. and there is no touchscreen driver yet. it needs some changes because of the input api changes between .12 and .16 |
14:13.43 | BabelOued | ok, i think rob_w work on it |
14:13.58 | BabelOued | for /dev i've same problem on my image |
14:14.19 | cr2 | i think it is a problem with udev. |
14:14.49 | cr2 | i'll try to run mknod manually. |
14:19.06 | goxboxlive | cr2: Ok, i have no idea about the BA. There are some bugs in OE now . I dont know what it is, but i am trying to use the hx4700 bb file now. It works, but there are stil som bugs. |
14:19.52 | goxboxlive | About the konq/E i have the same problem. I have told Mickey about it, but he is able to build it for zaurus so i have no idea what it could be. |
14:20.37 | cr2 | zaurus with "bigscreen" on ? |
14:20.58 | cr2 | zaurus is a too abstract target, like "htc". |
14:21.50 | cr2 | does the udev*ipk the same on hx4700 and universal ? |
14:21.59 | cr2 | i think it should be. |
14:22.55 | cr2 | <PROTECTED> |
14:22.58 | cr2 | <PROTECTED> |
14:23.04 | cr2 | <PROTECTED> |
14:39.43 | cr2 | goxboxlive: what do you have in your /dev ? |
14:46.45 | goxboxlive | I dont know what the udev does in the hx4700. But i guess it is the same as for the uni. |
14:46.49 | goxboxlive | ttySAx |
14:46.54 | goxboxlive | ttySx |
14:46.58 | goxboxlive | rfcommx |
14:47.10 | goxboxlive | and a bunch of others. |
14:47.37 | goxboxlive | But my lsat update has broke my OE again. |
14:50.27 | cr2 | there is a /etc/device_table file with some strange entries, but the mount should happen before. do you know the syntax of /etc/device_table ? |
14:52.36 | cr2 | the root mount should be a kernel config problem. |
14:53.08 | goxboxlive | /etc/devicetabel no |
14:54.23 | BabelOued | cr2: i've made a merge yesturday between universal and blueangel, but don't found parameter |
14:59.48 | cr2 | CONFIG_EMBEDDED |
14:59.51 | cr2 | what is that ? |
15:00.49 | cr2 | +CONFIG_CMDLINE="mem=64M" |
15:00.56 | cr2 | hmm. who has hardcoded that. |
15:02.11 | *** join/#htc-linux crypt1 (n=m1ndfuc@adsl-75-15-190-182.dsl.bkfd14.sbcglobal.net) |
15:02.24 | BabelOued | cr2: i don't know, i've removed mem=64M on my config |
15:02.31 | BabelOued | bug other don't know |
15:02.57 | cr2 | i'm going through the diff. |
15:03.30 | cr2 | +CONFIG_INPUT_TSDEV=m |
15:03.36 | cr2 | useless. |
15:03.52 | crypt1 | morning guys |
15:04.19 | cr2 | goxboxlive: -CONFIG_KEYBOARD_ATKBD=y for universal ?? |
15:04.26 | cr2 | hi crypt1 |
15:06.25 | goxboxlive | cr2 WHat is this? CONFIG_KEYBOARD_ATKBD=y ?? |
15:06.39 | crypt1 | cr2, any major advancements int he last few days? |
15:08.27 | *** join/#htc-linux lamikr|laptop (n=chatzill@dyn04-247.dsl.spy.dnainternet.fi) |
15:13.26 | cr2 | goxboxlive: this is from htcuniversal_defconfig |
15:13.41 | cr2 | crypt1: we can boot on ba. |
15:13.50 | cr2 | hi lamikr|laptop |
15:17.08 | crypt1 | ba? |
15:18.02 | BabelOued | crypt1: Blueangel |
15:23.20 | crypt1 | thx |
15:48.18 | *** join/#htc-linux Nalim (n=Miranda@213.151.92.182) |
16:07.37 | BabelOued | cr2: for BA these lines are missing from config file |
16:07.46 | BabelOued | CONFIG_BLK_DEV_RAM=y |
16:07.46 | BabelOued | CONFIG_BLK_DEV_RAM_COUNT=16 |
16:07.46 | BabelOued | CONFIG_BLK_DEV_RAM_SIZE=4096 |
16:07.46 | BabelOued | CONFIG_BLK_DEV_INITRD=y |
16:09.08 | goxboxlive | cr2: YEs what about it, should it be removed or what? |
16:48.20 | rob_w | re |
16:48.48 | rob_w | for some strange reasons ssp_init now does not support more then 3 parameters .. but it seems it did on 2.6.12 |
16:50.01 | cr2 | rob_w: hi. what is the major,minor for /dev/mmcblk0p2 ? 254,2 ? |
16:50.35 | rob_w | cr2, to me it never was /dev/mmcblk0p2 ... but /dev/mmcblk0/part2 |
16:50.50 | cr2 | devfs is dead. |
16:50.58 | rob_w | ah |
16:51.02 | rob_w | hail udev |
16:51.07 | cr2 | :) |
16:51.27 | cr2 | it is not an option in .16 |
16:51.41 | rob_w | we need to have a quick ftp to exchange our small changes quickly , any idea`s ? |
16:52.08 | rob_w | BabelOued, is your ftp always on ? |
16:52.13 | cr2 | gnulinux.biz ? |
16:52.20 | rob_w | ah right ,... |
16:52.24 | cr2 | btw, who is an admin of xanadux.org ? |
16:53.11 | rob_w | ok , my ftp account still works there |
16:53.12 | cr2 | i can't even change the website, because i'm not in the right group. |
16:54.02 | cr2 | so i'm forced to put everything on jornada820. |
16:54.12 | rob_w | is there also a tsc2200 in any other devices then hima or ba ? |
16:54.17 | cr2 | which is actually overfilled already. |
16:54.29 | rob_w | cr2, why dont you use the hh.org wiki ?? |
16:54.45 | cr2 | rob_w: no. but look at the tsc2101 |
16:55.03 | cr2 | wiki != ssh access != ftp != http |
16:55.20 | rob_w | hmm |
16:55.37 | rob_w | right i saw that tsc2101 around .. ok |
16:57.12 | BabelOued | rob_w: do you put your tsc2200.c in gnulinux.biz? |
16:57.32 | rob_w | will do then , when it feels right :-) |
16:57.56 | rob_w | right now i just left out ssp_init call |
16:58.08 | cr2 | the ts driver on top of tsc2200 (ts3) will not work without some api changes. |
16:58.31 | rob_w | oh |
16:59.18 | rob_w | so u say the input.h api changed ? |
17:00.12 | cr2 | rob_w: drivers/soc/tsc2101.c seems to be a nice driver. |
17:00.28 | cr2 | no. the static device allocation and init are gone. |
17:00.35 | rob_w | so we need to create a tsc folder , move the tsc2101 and tsc2200 into them and added each device as an option to them , or ? |
17:00.59 | rob_w | that show mirror the real world better |
17:01.23 | cr2 | if you have a battery monitor and temperature, it is a soc |
17:01.32 | rob_w | so then it is sure , ssp might also did see changes at .16 |
17:02.47 | rob_w | i join back later .. i ve dvd`S to watch :-) |
17:02.49 | cr2 | there is a generic spi layer, but it will take some time before everybody will use it. |
17:04.46 | BabelOued | cr2: i've a warning "cannot open initial console" do you have it ? |
17:05.32 | cr2 | BabelOued: you don't need initrd. |
17:05.50 | cr2 | i'm looking for the mmc major,minor |
17:13.08 | BabelOued | i don't know it |
17:16.04 | cr2 | 254,2 i have added it to the initramfs, but it did not help. |
17:16.30 | cr2 | but it works for universal... |
17:16.40 | cr2 | even without it. |
17:20.05 | BabelOued | i ve same problem with an initrd image linux boot but can't connect throught USB |
17:20.22 | BabelOued | and at boot time i've this message |
17:20.44 | BabelOued | warning : unable to open an initial console |
17:23.23 | cr2 | you don't have a /dev/console file. mknod -m 600 /dev/console c 5 1 |
17:24.28 | BabelOued | ok i add it to linuxrc |
17:29.17 | cr2 | tried it with the initrd, got the same error. |
17:31.57 | cr2 | pc/dos partition support is missing |
17:33.55 | Kevin2 | cr2: Any chance you could sync apache with hh.org cvs? Latest patch in svn as: kernel/000_hhcvs-20060715.patch |
17:35.53 | cr2 | Kevin2: yes. this evil blueangel :) |
17:38.06 | Kevin2 | Fighting the forces of evil? (Or blue?) |
17:40.30 | cr2 | it rejects to mount root for some reason. |
17:40.38 | Kevin2 | Anyone know what the general charge code looks like? If I get a plugin ISR, should I enable the charger - then check for battery voltage - then conditionally disable the charger depending on voltage? |
17:41.36 | Kevin2 | cr2: You have all the right drivers (filesystem, mmc, block layer, etc.) |
17:42.04 | cr2 | i think so. but there are some more details in hx4700. highpower charger available... |
17:42.12 | cr2 | what is etc. ? |
17:42.17 | *** join/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-82-131.maa.sify.net) |
17:42.27 | Kevin2 | anything else that is needed. :-) |
17:42.59 | Kevin2 | It looks like apache has a high-voltage charge setting as well. |
17:43.13 | Kevin2 | The hx4700 code looks very complicated, however. |
17:43.27 | cr2 | yes. |
17:43.49 | cr2 | they had the pin descriptions from HP. |
17:44.05 | NickBee | hi guys |
17:44.12 | cr2 | hi NickBee |
17:44.23 | NickBee | how are things cr2, kevin? |
17:45.04 | Kevin2 | Good - how about yourself? |
17:45.12 | NickBee | cr2: can yoy spare some time today :) ? |
17:45.56 | NickBee | me too ... having a good time this weekend ... went to see "The Taj" today :) |
17:46.09 | cr2 | NickBee: as always, somewhere in between :) |
17:46.33 | NickBee | as far as its even a little, its good for me :) |
17:47.09 | NickBee | we had to check the usb interface, for PUEN |
17:47.56 | cr2 | yes. there were even some ideas where it is. |
17:48.58 | NickBee | yup, we found out that there were two GPIO calls |
17:49.05 | NickBee | with every TS activity |
17:49.14 | NickBee | B6 and A7 i guess |
17:49.46 | Kevin2 | Any idea what the "w1" is on the hx4700? |
17:50.12 | cr2 | 1 wire bus. |
17:50.19 | cr2 | aka OWM |
17:50.43 | cr2 | usually used to transmit sensor data. |
17:51.00 | cr2 | asic3 has a hw controller to support it. |
17:51.42 | Kevin2 | Oh, okay. I don't think I have to worry about that. |
17:51.49 | cr2 | NickBee: b6 is an input, so it can't be puen. |
17:51.54 | cr2 | then it is a7. |
17:52.11 | cr2 | Kevin2: battery ? |
17:52.19 | NickBee | b6 is an input, what does that means cr2? |
17:52.47 | cr2 | puen is an output. |
17:53.07 | NickBee | Ok |
17:53.12 | Kevin2 | I don't think there is a 1-wire bus on the apache. The battery voltage is sensed via the ad7877. |
17:53.14 | NickBee | so its a7 then |
17:54.16 | cr2 | ok. |
17:55.00 | cr2 | Kevin2: put patches to hh.org. check with your tree. |
17:55.02 | BabelOued | cr2: which gadget do i need for USBNET? USB_GADGET_PXA2XX? |
17:55.28 | cr2 | BabelOued: g_ether |
17:55.52 | BabelOued | what is "USB_GADGET_PXA2XX" ? |
17:55.53 | cr2 | pxa2xx is a general option for all usb gadgets |
17:56.04 | BabelOued | ok |
17:56.10 | cr2 | usb_serial & so on. |
17:56.42 | Kevin2 | cr2: Looks like there is an upload/download delay on hh.org. (The checkin was to head, right?) |
17:56.58 | cr2 | BabelOued: can you mount root ? |
17:57.07 | cr2 | Kevin2: yes. to head. |
17:57.43 | cr2 | i don't think it is a very big delay like it was on sf.net ;) |
17:58.19 | BabelOued | cr2: yes i can mount initrd and boot but no prompt or login |
17:58.49 | BabelOued | cr2: i try directly from mmc |
18:04.25 | BabelOued | cr2: no i can't |
18:07.27 | NickBee | cr2, can we try with a7 then? |
18:07.51 | cr2 | NickBee: i'm compiling the kernel. |
18:08.16 | NickBee | :) |
18:10.06 | cr2 | NickBee: what distribution is on your minisd card ? |
18:11.14 | Kevin2 | Odd. The hx4700 doesn't seem to disable the charger at any point. |
18:11.16 | NickBee | zbee-ts, hh3 i guess |
18:11.46 | Kevin2 | At any point when the battery is full. (It does disable if you pull the plug out.) |
18:11.54 | Kevin2 | cr2: The checkin looks okay. |
18:12.57 | cr2 | Kevin2: strange. universal semi-periodically pulls the pin which i think is charge_enable. |
18:13.48 | Kevin2 | Under wm5, the apache will deactive the charge pin after the battery is full. I'm not seeing that on the hx4700 linux code, however. |
18:14.05 | cr2 | there was a good comment on hh.org, that the ds2762 is usually put in the battery itself, so you have a w1 data source on charge,voltage and temperature + eeprom with ACR & friends. |
18:14.32 | Kevin2 | ACR? |
18:14.51 | cr2 | i did not see ds2762 on universal's motherboard, but it is there. |
18:15.06 | cr2 | AccumulatedCharge_something. |
18:15.45 | *** join/#htc-linux toi (n=peter@d54C27365.access.telenet.be) |
18:15.53 | cr2 | NickBee: get a new zbee-ts |
18:16.01 | NickBee | Ok |
18:16.15 | cr2 | it is .16-hh4 so the modules are just not there. |
18:17.00 | Kevin2 | Hrmm. It might be on apache, but I don't know what is controlling it. |
18:17.52 | Kevin2 | I don't see the pxa gpios bit-banging anything out. There is that funky "micro-controller" thingy which could be doing something. It's also possible the ad7877 could be bit-banging something out - but that seems unlikely. |
18:18.44 | cr2 | dump the first 4 or 8 MB of RAM. if you will see "ACR" and "OWM" with strings, it _may_ be a hint. |
18:18.51 | cr2 | cpld ? |
18:19.49 | Kevin2 | I've traced the memory accesses to what I think is the cpld and don't see anything funky going on. |
18:20.13 | Kevin2 | There is one output gpio that I don't know what it does - but it definitely isn't bit-banging anything out. |
18:22.37 | Kevin2 | I only get two matches (outside of haret itself) for owm: OWMINT EN OWMINT Disable |
18:23.36 | cr2 | hmm. it is in the irq code. |
18:23.38 | Kevin2 | Only one match for ACR: ----[Learn Cycle] ACR Reset Fail ------ |
18:25.15 | NickBee | cr2: crash |
18:25.28 | NickBee | horizontal white lines |
18:25.51 | cr2 | NickBee: ok. looking for a bug. |
18:26.14 | NickBee | ok |
18:26.31 | *** join/#htc-linux Nalim (n=Miranda@213.151.92.182) |
18:28.57 | cr2 | NickBee: already found even 2 bugs. 1 in the code for the universal :) was wondering a long time why usb autodetect was failing for the universal ;) |
18:29.08 | Kevin2 | Hrmm. Htcuniversal looks to have the same as hx4700 for power. Where do you check for full battery and disable the charger? |
18:29.22 | NickBee | :) |
18:29.34 | NickBee | blessing in disguise :) |
18:31.38 | cr2 | Kevin2: i see only 1 gpio pin (enable/disable). full battery should be reported by ds2762. 4.2V+current under some threshold. this is my guess, of course, based on logging "powermon" output. |
18:31.57 | cr2 | and watching gpios. |
18:33.05 | cr2 | NickBee: this bug is annoying, but it is not a reason for a crash, there must be something else. |
18:33.46 | NickBee | can it be because of hh4? |
18:33.59 | NickBee | i.e. movement to hh4? |
18:34.27 | NickBee | or if i need to put something "new" in default.txt ? |
18:42.06 | cr2 | NickBee: modified some other things. try again. |
18:42.14 | NickBee | ok |
18:50.37 | cr2 | goxboxlive: i have corrected one bit for the universal USB detection, can you test it ? |
18:50.44 | NickBee | booted to login prompt :) forgot to change the init |
18:51.01 | NickBee | booting back again to get that corrected |
18:51.51 | NickBee | booting to linux |
18:51.54 | *** part/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-82-131.maa.sify.net) |
18:53.11 | BabelOued | cr2: booting to shell using init=/bin/sh at cmdline |
18:53.26 | BabelOued | but don't have keyboard, need tsc2200 ...... |
18:56.21 | cr2 | BabelOued: can you pastebin the diff to defconfig ? |
18:56.59 | BabelOued | cr2: i only boot on my initrd not on mmc |
18:57.46 | cr2 | hmm. |
19:02.19 | BabelOued | cr2: what is ssp function ? |
19:09.50 | *** join/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-80-93.maa.sify.net) |
19:10.56 | NickBee | the file to start X again was :/etc/inittab, right? |
19:13.14 | cr2 | NickBee: yes. |
19:13.32 | NickBee | i chaged that, but it booted in runlevel 3 again |
19:13.43 | cr2 | BabelOued: what ssp function you need ? |
19:13.50 | cr2 | runlvel 5 |
19:14.26 | NickBee | the ID:5 was required |
19:14.36 | NickBee | and initdefault=5 as well |
19:14.44 | NickBee | anything else was to be changed? |
19:14.51 | cr2 | goxboxlive: something for the windows : http://www.fs-driver.org/ |
19:15.02 | cr2 | NickBee: initdefault |
19:15.20 | NickBee | yes, i set initdefault to 5 as well |
19:15.35 | BabelOued | cr2: in code i read that blueangel_kp use himalaya tsc2200 module |
19:15.50 | BabelOued | i only need to have a working keyb for debug |
19:16.50 | cr2 | it is a horrible mess there ;) do you have usb ? |
19:17.10 | BabelOued | yes |
19:17.31 | cr2 | there is a good reason ts/keyboard is not working. |
19:17.39 | cr2 | why don#t you use ssh ? |
19:17.49 | BabelOued | USB don't work maybe same problem like mmc |
19:18.14 | cr2 | modprobe g_ether in /linuxrc on your ramdisk. |
19:18.16 | BabelOued | module usbnet don't detect a peer on my pc |
19:18.24 | cr2 | install the modules to the ramdsik. |
19:19.19 | BabelOued | cr2: i try to do that one time more :) |
19:19.29 | cr2 | lsusb on the pc ? |
19:22.30 | BabelOued | maybe this line |
19:22.31 | BabelOued | Bus 002 Device 037: ID 0bb4:0a05 High Tech Computer Corp. |
19:27.37 | cr2 | yes. modprobe g_ether |
19:27.46 | cr2 | pull the cable in and out. |
19:38.31 | BabelOued | cr2: done, but error message on pc |
19:38.47 | BabelOued | usb 2-1: new full speed USB device using uhci_hcd and address 40 |
19:38.47 | BabelOued | usb 2-1: device descriptor read/64, error -71 |
19:42.11 | cr2 | lsusb ? |
19:43.11 | BabelOued | nothing |
19:44.34 | cr2 | when you connect/disconnect the usb cable, do you see USB messages on the LCD ? |
19:45.11 | cr2 | i'll be back soon. |
19:48.53 | BabelOued | no message... me too back later tomorrow |
20:13.19 | *** part/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-80-93.maa.sify.net) |
20:21.22 | *** join/#htc-linux lpotter (n=ljp@c210-49-127-23.rochd1.qld.optusnet.com.au) |
20:35.04 | *** join/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-80-36.maa.sify.net) |
20:35.13 | NickBee | cr2: still no ts |
20:35.40 | NickBee | gets stuck at the calibrate screen of opie |
20:40.24 | NickBee | oh sh**t! just recalled, A7 and B6 were for usb detection thing that we were trying for connecting over to linux machine....not TS |
20:40.49 | NickBee | r u around cr2? |
20:43.18 | NickBee | lets catch up ltr then..g nite |
20:43.23 | *** part/#htc-linux NickBee (n=Dheeraj@dialpool-210-214-80-36.maa.sify.net) |
21:28.58 | *** join/#htc-linux Nalim (n=Miranda@213.151.92.182) |
21:35.12 | *** join/#htc-linux Nalim41 (n=Miranda@213.151.92.182) |
21:39.42 | *** join/#htc-linux crypt1 (n=m1ndfuc@adsl-75-15-190-182.dsl.bkfd14.sbcglobal.net) |
22:06.42 | goxboxlive | cr2 : I tried compiling the new cvs kernel but it failes. http://pastebin.ca/89171 |
22:15.55 | cr2 | goxboxlive: i'll check. blueangel does not boot, and thinks that the sd card is readonly for some reason. |
22:16.07 | goxboxlive | ok |
22:16.12 | cr2 | ah. ok. |
22:20.19 | cr2 | ok. should work now. |
22:20.38 | cr2 | it compiles now. |
22:20.44 | goxboxlive | ok, i'll try |
22:26.26 | goxboxlive | did you remove the at keyboard in the defconfig? |
22:27.56 | cr2 | no. |
22:30.53 | goxboxlive | Have you done anything to the sound driver ? |
22:31.39 | cr2 | no. |
22:31.55 | goxboxlive | :-) I know you have a lot to do :-) |
22:32.08 | goxboxlive | What shall i look fo. It botted |
22:32.12 | goxboxlive | booted |
22:32.19 | cr2 | usb. |
22:32.31 | Kevin2 | cr2: You have any luck tracing the FFUART registers? |
22:32.39 | goxboxlive | usb ether? |
22:32.50 | cr2 | does it change from "HTC" to usbnet automatically. |
22:33.03 | cr2 | Kevin2: have not tried. |
22:33.48 | goxboxlive | I noticed one thing. The keyboard light isent on when booting :-) |
22:37.00 | goxboxlive | cr2 what do you mean? I plugged in the usb cable, it got detected, (my wlan was down), but i had to ifup usb0 to get the it ping |
22:37.55 | *** join/#htc-linux BoSJo (n=bosjo@130.80-203-23.nextgentel.com) |
22:38.52 | cr2 | it should show "HTC" before the boot, and "SA1100" after. |
22:40.35 | goxboxlive | SA1100 Real Time Clock driver? |
22:41.44 | cr2 | no. whatever usbnet is called by USB id. |
22:42.00 | cr2 | rndis is called Netchip something. |
22:42.06 | goxboxlive | But what was the keyboatd light bug. It seems like you have fixed it now, or is it because i have uncheked the AT keyboard in the kernel config? |
22:42.30 | cr2 | i have added a zero init value. |
22:42.36 | goxboxlive | ok |
22:44.12 | cr2 | Kevin2: we will need a sane platform_device driver for the sound. otherwise universal and apache drivers will clash. |
22:44.14 | goxboxlive | i cant see anything about it. I'll try to reboot with usb cable plugged in |
22:44.38 | cr2 | run lsusb before the boot, and then after. |
22:45.06 | cr2 | goxboxlive: have you seen this link ? http://www.fs-driver.org/ |
22:45.45 | goxboxlive | yes i saw it, i have used another app called explore2fs, never used that one. |
22:45.46 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
22:46.21 | cr2 | this one can read and write ext3. |
22:46.43 | cr2 | BabelOued: i have found some strange thing on the blueangel. |
22:46.51 | goxboxlive | ok, but it is unstable i guess |
22:47.05 | BabelOued | cr2: which one ? |
22:48.50 | cr2 | the asic3_mmc always says mmc0: blabla (ro) which means the card is read-only. |
22:49.25 | goxboxlive | Bus 001 Device 011: ID 049f:505a Compaq Computer Corp. SA-11x0 based Linux Device, or Itsy (experimental) |
22:49.36 | BabelOued | cr2: yes i see that but i think it 's normal, we need to make a mount -o rw,remount / after boot |
22:49.38 | cr2 | it does not depend on the switch position. can you check it ? |
22:50.14 | cr2 | goxboxlive: great. that is what i wanted to know. |
22:50.18 | goxboxlive | :-) |
22:50.28 | cr2 | goxboxlive: you can also test rndis. |
22:51.00 | goxboxlive | i dont have rndis |
22:51.34 | cr2 | if this option is enabled, then the usb name will be different. Netchip something. |
22:52.12 | cr2 | BabelOued: hmm. |
22:52.40 | cr2 | goxboxlive: a stupid question now. if you will put the SD switch to RO, will linux boot ? |
22:52.48 | cr2 | on universal. |
22:53.09 | goxboxlive | i dont know, i can try. Hold on |
22:53.11 | cr2 | or will the kernel crash. |
22:53.20 | goxboxlive | i guess it will crash |
22:53.35 | cr2 | then i'd like to know where. |
22:54.28 | BabelOued | cr2: you think on BA there is a GPIO that detect RO or RW on mmc ? |
22:55.00 | cr2 | BabelOued: yes, but it is not used by linux. |
22:55.03 | goxboxlive | kernel panic |
22:55.16 | cr2 | what is the last message ? |
22:55.25 | goxboxlive | cannot open root on device mmc***'blk02 |
22:55.31 | goxboxlive | not syncong |
22:55.35 | BabelOued | cr2: yes same thing |
22:55.41 | cr2 | yes. it is the same shit as on blueangel. |
22:55.53 | BabelOued | maybe try with haret to detect a change |
22:56.38 | Kevin2 | cr2: Yes. It doesn't look too hard to make the sound into a platform device. |
22:56.57 | Kevin2 | But we'll need to update hx4700 which could be a pain to synchronize. |
22:58.14 | cr2 | Kevin2: they tag the "release" versions. we can contact them anyway. at least this arch is maintained ;) |
22:58.36 | Kevin2 | Have you looked at the pxa27x usb driver? Someone copied the pxa2xx driver and made changes -- but it clearly has some "issues". It doesn't do the pullup at the right time. It doesn't reset properly when booting with usb already plugged in. etc. |
22:59.56 | cr2 | there are some other kernel patches in the oe tree, which are applied only for some devices. but i've lost the track there. |
23:02.47 | cr2 | i must admit that UDC more or less works. we will get more issues with the USBH. |
23:03.41 | cr2 | hmm. maybe it's a good idea to make the modem AT command interface work. |
23:09.14 | BabelOued | cr2: i use "DUMP GPIO" but nothing change with and without mmc lock |
23:15.04 | cr2 | http://wiki.xda-developers.com/index.php?pagename=BlueangelASIC3 |
23:15.19 | cr2 | gpiod14 |
23:16.35 | BabelOued | cr2: i use the right command ? because i don't see any change... maybe i use a wrong haret |
23:22.17 | cr2 | wasic3gpio |
23:23.43 | cr2 | Kevin2: are you looking at the FFUART now ? |
23:27.35 | cr2 | good night. |
23:32.53 | Kevin2 | cr2: No - not yet. |
23:32.55 | Kevin2 | good night. |