01:15.25 | Notify | 02GCI:aca1234 * 4639899508539392 : Task Claimed - I would like to work on this task. |
02:31.14 | Notify | 02GCI:smriti7545 * 6383010643443712 : Task Claimed - I would like to work on this task. |
03:01.09 | andromeda-galaxy | is there any interest in having a set of GCI tasks for implementing generalized sweep for extrude, as discussed at about 19:06.10 in http://infobot.rikers.org/%23brlcad/20130819.html.gz? |
03:01.23 | andromeda-galaxy | (e.g. one for adding support to plot(), one for shot(), one for tess()) |
03:52.37 | Notify | 02GCI:mihaineacsu29 * 5795100017819648 : Task Closed - Congratulations, this task has been completed successfully. |
04:04.56 | Notify | 02GCI:ishwerdas * 5269456200663040 : Task Assigned - This task has been assigned to speed racer. You have 100 hours to complete this task, good luck! |
04:06.46 | Notify | 02GCI:gjeet * 5643416469766144 : Task Closed - Congratulations, this task has been completed successfully. |
04:07.55 | Notify | 02GCI:ishwerdas * 5032082837340160 : Task Assigned - This task has been assigned to Hasan Ahmad. You have 100 hours to complete this task, good luck! |
04:26.05 | Notify | 02GCI:ishwerdas * 6268869404524544 : None - Nice work marc! I would suggest few little improvements. The line-height in objects section needs to be increased a bit and the background color of... |
04:26.40 | Notify | 02GCI:ishwerdas * 6268869404524544 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed... |
04:46.01 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) |
04:51.14 | *** join/#brlcad YashM (~YashM@117.198.20.178) |
04:57.03 | Notify | 02GCI:ishwerdas * 5890868175175680 : Task Closed - Congratulations, this task has been completed successfully. |
04:58.23 | Notify | 02GCI:ralpt3748752_qejwhe * 5845550716944384 : Ready for review - The work on this task is ready to be reviewed. |
05:04.34 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
05:09.55 | *** join/#brlcad yukonbob (~bch@50.34.176.126) |
05:09.58 | yukonbob | hello #brlcad |
05:11.17 | Notify | 02GCI:ishwerdas * 6268869404524544 : None - Nice work marc! I would suggest few little improvements. The line-height in objects section needs to be increased a bit and the background color of... |
05:16.02 | Notify | 02GCI:brlcad * 5300224759169024 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
05:26.40 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
05:31.09 | Notify | 02GCI:sanjana * 5300224759169024 : Uploaded new image - I changed the background from white to black and now it comes out with my name clearly in 3D. I liked rotating it in various directions. ... |
06:03.32 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
06:08.59 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
06:09.19 | Notify | 02GCI:brlcad * 5300224759169024 : Task Closed - Congratulations, this task has been completed successfully. |
06:19.22 | Notify | 02GCI:keshashah * 6454119397064704 : Task Closed - Congratulations, this task has been completed successfully. |
06:21.38 | Notify | 02GCI:brlcad * 5845550716944384 : don't understand - Raptor, I didn't understand your question. I think you might have intended to ask what command will create copies of an object around a... |
06:23.13 | Notify | 02GCI:loopyhano475 * 4639899508539392 : Claim Removed - The claim on this task has been removed, someone else can claim it now. |
06:24.18 | Notify | 02GCI:hrishi1304 * 4956557716488192 : Task Claimed - I would like to work on this task. |
06:24.32 | Notify | 02GCI:kengwee * 6454119397064704 : Ready for review - The work on this task is ready to be reviewed. |
06:25.08 | Notify | 02GCI:tannousmarc * 6268869404524544 : Regarding further tasks - Did not know that Archer is going to become Mged once out of Beta, and considering my past works on Archer's UI ( The splash screen... |
06:28.58 | Notify | 02GCI:mihaineacsu29 * 5854317466615808 : Task Assigned - This task has been assigned to tlidanski. You have 100 hours to complete this task, good luck! |
06:39.35 | Notify | 02GCI:Melange * 5890868175175680 : No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
06:45.31 | Notify | 02GCI:tannousmarc * 6268869404524544 : Ready for review - The work on this task is ready to be reviewed. |
06:49.57 | Notify | 02GCI:ralpt3748752_qejwhe * 5332242800836608 : Task Claimed - I would like to work on this task. |
07:15.48 | Notify | 02GCI:Melange * 5625032667561984 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
07:20.35 | Notify | 02GCI:rohit_agarwal * 5890868175175680 : Files Uploaded - I uploaded three new files moose 3.xcf moose 3.png and moose 3 without shadow.png |
07:21.30 | Notify | 02GCI:Melange * 6094206841913344 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
07:28.21 | Notify | 02GCI:brlcad * 6620713125412864 : Task Closed - Congratulations, this task has been completed successfully. |
07:36.08 | Notify | 02GCI:o7p9bxbnyj * 5795100017819648 : Task Claimed - I would like to work on this task. |
07:40.44 | Notify | 02GCI:tannousmarc * 6268869404524544 : Ready for review - The work on this task is ready to be reviewed. |
07:50.21 | Notify | 02GCI:gjeet * 5773120388464640 : Task Assigned - This task has been assigned to Aditya Gulati. You have 100 hours to complete this task, good luck! |
07:54.36 | Notify | 02GCI:shardulc * 5338260117127168 : Task Claimed - I would like to work on this task. |
08:26.56 | Notify | 02GCI:brlcad * 6268869404524544 : Tasks for both - If you're inclined to work on more than one of these, let me know so we can get some more tasks added. :) |
08:51.23 | Notify | 02GCI:gjeet * 5338260117127168 : Task Assigned - This task has been assigned to shardulc. You have 96 hours to complete this task, good luck! |
09:07.44 | *** join/#brlcad infobot (ibot@rikers.org) |
09:07.44 | *** topic/#brlcad is Topic for #brlcad: BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || Welcome GCI 2014 participants! If you're participating, be patient when asking questions... we're very busy and sometimes have packed schedules. We will respond if you are still on IRC: learn screen+irssi. |
09:26.52 | *** join/#brlcad merzo (~merzo@2-5-132-95.pool.ukrtel.net) |
09:51.58 | *** join/#brlcad shardulc (~shardul@122.170.37.169) |
09:53.42 | shardulc | hello everybody, I'm doing the dead code elimination task |
09:54.04 | shardulc | what is a good place to look for 'dead' function *definitions*? |
09:54.24 | shardulc | ('look' as in my script will look) |
09:55.04 | Notify | 02GCI:gjeet * 5910608918609920 : Nice work - I really liked how you wrote BRL-CAD. Can you tell how you made that thing. Also How much time it took to make this thing ? |
10:07.32 | Stragus | I'm not involved in GCI but I think the definition of dead-code used includes code duplication |
10:09.03 | Stragus | i.e. Find similar/identical codes that can be merged and replaced by a function call or so |
10:11.01 | shardulc | I think there's a separate task for that |
10:12.20 | Stragus | Oh. That's possible too |
10:16.28 | shardulc | but where do you think I'll find dead code? |
10:16.46 | shardulc | where would the dead functions be defined, to be precise? |
10:18.20 | Stragus | Can your script locate functions that are defined but never called anywhere? There are some of these |
10:20.01 | shardulc | yes |
10:20.20 | shardulc | using a little regex; is that fine? |
10:20.28 | Stragus | Sure, whatever works |
10:20.42 | *** join/#brlcad merzo (~merzo@31-24-132-95.pool.ukrtel.net) |
10:22.48 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
10:23.29 | shardulc | so where are they? |
10:23.54 | shardulc | like, it would take too much time to go through the whole src/ dir |
10:24.31 | Stragus | You could start by src/libbn, I'm sure there's unused code in there somewhere |
10:25.27 | shardulc | the task description page http://www.google-melange.com/gci/task/view/google/gci2014/5338260117127168 tells me to exclude src/lib* directories, I think |
10:25.28 | gcibot | Identify and eliminate dead code (100+ lines) #2 |
10:25.29 | gcibot | Status: Claimed (3 days 22 hrs 25 min) |
10:25.29 | gcibot | Mentor(s): Popescu Andrei, Mihai Neacsu, Sean |
10:25.43 | shardulc | or maybe it's just for the 'manual testing' section |
10:26.03 | Stragus | Ah right, makes sense too. It's handy to keep lib* code around even if unused |
10:28.07 | Stragus | If you can stick around, the people who can help most should wake up in about 2 hours. My knowledge of the BRL-CAD source is limited, I have worked on fairly independent chunks of code. |
10:31.49 | shardulc | all right |
10:34.16 | Notify | 02GCI:prudhvirajnaidu * 5220441446678528 : Help needed - Whenever I try to run your command to convert png to bw it says Error: pix-read: Cannot read file |
10:45.38 | ``Erik | no, stay away from the lib directories |
10:45.51 | ``Erik | look in things like src/procdb src/mged src/conv ... |
10:46.37 | ``Erik | the lib dirs have funcs that may not be used in BRL-CAD itself, but might be used by third party products... so they'd need the full deprecation cycle to get rid of |
10:48.47 | *** join/#brlcad merzo (~merzo@31-24-132-95.pool.ukrtel.net) |
10:49.25 | shardulc | ok, thanks, ``Erik! |
10:52.07 | ``Erik | good luck! |
11:00.41 | *** part/#brlcad shardulc (~shardul@122.170.37.169) |
11:10.41 | Notify | 02GCI:melvinfoo * 5833318566199296 : Task Claimed - I would like to work on this task. |
11:11.50 | *** join/#brlcad YashM_ (~YashM@104.152.45.3) |
11:21.42 | Notify | 02GCI:brlcad * 6268869404524544 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
11:28.08 | Notify | 02GCI:vasusethia10 * 4956557716488192 : Task Claimed - I would like to work on this task. |
11:28.38 | Notify | 02GCI:brlcad * 5845550716944384 : Task Closed - Congratulations, this task has been completed successfully. |
11:45.19 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
12:00.46 | Notify | 02GCI:ralpt3748752_qejwhe * 5332242800836608 : How to divide the object along the path? - In the image circle z1 distributed on 3 trajectories. <a target="_blank"... |
12:11.39 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
12:49.58 | Notify | 02GCI:gjeet * 6268869404524544 : Task Closed - Congratulations, this task has been completed successfully. |
12:53.54 | *** join/#brlcad MarcTannous (5679c4d5@gateway/web/cgi-irc/kiwiirc.com/ip.86.121.196.213) |
13:19.44 | Notify | 02GCI:deepakkumarsharma * 5836136417067008 : Task Assigned - This task has been assigned to Rohit Agarwal. You have 100 hours to complete this task, good luck! |
13:28.10 | Notify | 02GCI:deepakkumarsharma * 5220441446678528 : Task Assigned - This task has been assigned to prudhvirajnaidu. You have 100 hours to complete this task, good luck! |
14:01.39 | Notify | 02GCI:ralpt3748752_qejwhe * 5845550716944384 : Ready for review - The work on this task is ready to be reviewed. |
14:07.18 | *** join/#brlcad shardulc (~shardul@122.170.37.169) |
14:07.30 | *** join/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
14:08.00 | shardulc | when I make some changes to BRL-CAD, must *all* of the regression tests pass? |
14:09.06 | Notify | 02GCI:melvinfoo * 5833318566199296 : Problem extruding - Hi mentors, I have some experience in command line and CAD programs but when I try to extrude the bitmap by typing this command into the... |
14:09.36 | Notify | 02GCI:brlcad * 5833318566199296 : Task Assigned - This task has been assigned to Melvin Foo. You have 100 hours to complete this task, good luck! |
14:11.07 | ``Erik | shardulc: they should, but if a test fails before your changes, I think that can be excused... don't introduce any new failures in the tests and you should be fine |
14:11.44 | ``Erik | (but if a test is wrong, let a mentor know and we can figure out where to go from there) |
14:17.51 | MarcTannous | what task are you workign on shardulc? |
14:18.07 | shardulc | https://www.google-melange.com/gci/task/view/google/gci2014/5338260117127168 |
14:18.08 | gcibot | Identify and eliminate dead code (100+ lines) #2 |
14:18.08 | gcibot | Status: Claimed (3 days 18 hrs 32 min) |
14:18.08 | gcibot | Mentor(s): Popescu Andrei, Mihai Neacsu, Sean |
14:18.19 | MarcTannous | what file are you eliminating code form? |
14:19.09 | shardulc | currently, I've got some from src/conv/asc/asc2g.c and src/conv/iges/planar_nurb.c |
14:19.47 | MarcTannous | ah okay |
14:19.52 | shardulc | ``Erik: regress-flawfinder and regress-quote fail on a fresh checkout for me |
14:19.53 | MarcTannous | not sure if my changes are commited |
14:20.12 | MarcTannous | because I've done two of these tasks |
14:21.07 | shardulc | which ones? I'll avoid them |
14:21.15 | shardulc | which files, I mean |
14:21.29 | MarcTannous | give me a sec |
14:23.30 | MarcTannous | Modified files : |
14:23.36 | MarcTannous | src/convstep/Factory.h |
14:23.53 | MarcTannous | src/conv/step/step-g/Factory.h |
14:24.04 | MarcTannous | src/conv/step/step-g/Factory.cpp |
14:24.08 | shardulc | it's fine as long as they're headers |
14:24.16 | shardulc | I'm working only with the .c files |
14:24.24 | MarcTannous | some of these were removed |
14:24.25 | shardulc | (makes it easier for my script) |
14:24.27 | MarcTannous | soem off these were changed |
14:24.59 | MarcTannous | src/conv/step/ap242-g/Factory.h |
14:25.29 | MarcTannous | src/conv/step/ap242-g/Factory.cpp |
14:26.00 | MarcTannous | g-step/Comb.cpp |
14:26.08 | MarcTannous | g-step/Comb.h |
14:26.22 | MarcTannous | that's it |
14:26.25 | MarcTannous | all on BRL-CAD |
14:26.34 | MarcTannous | not rt^3 |
14:26.50 | shardulc | ok, thanks |
14:27.43 | shardulc | ``Erik: regress-flawfinder and regress-quote don't show up in 'make regress' |
14:27.56 | shardulc | but they're failing when I do 'make test' |
14:34.56 | Notify | 02GCI:khyati_mahendru * 5910608918609920 : Ready for review - The work on this task is ready to be reviewed. |
14:53.27 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
15:00.32 | Notify | 02GCI:adityagulati * 5773120388464640 : Ready for review - The work on this task is ready to be reviewed. |
15:00.53 | Notify | 02GCI:deepakkumarsharma * 4639899508539392 : Task Assigned - This task has been assigned to Saurabh Bachawe. You have 100 hours to complete this task, good luck! |
15:17.59 | Notify | 02GCI:deepakkumarsharma * 5863174712590336 : Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
15:27.10 | *** part/#brlcad shardulc (~shardul@122.170.37.169) |
15:35.26 | Notify | 02GCI:vidushi * 5311760286351360 : Task Claimed - I would like to work on this task. |
15:38.46 | Notify | 02GCI:Melange * 5604954702086144 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
15:43.22 | Notify | 02GCI:ljudusika * 5317465831636992 : None - I was used binary distribution. |
15:56.25 | maths22 | the proper way to run tests is 'make check' and 'make regress' (or 'crest -LE NOT_WORKING') |
15:56.46 | maths22 | Make test is not expected to pass |
15:56.55 | *** join/#brlcad melfo (~chatzilla@101.127.150.174) |
16:27.06 | melfo | Hi mentors, |
16:27.07 | melfo | First time using irc, sorry in advance for posting wrongly! |
16:27.09 | melfo | I am trying to to extrude from a PNG but have a problem doing it. I converted a png to a bitmap by using: 'exec \[ file join \[ bu_brlcad_root bin \] pix-bw \] hello.png \> hello.bw' on the mged prompt. No errors here. Next, I extruded the bitmap by typing this command into the mged> prompt: 'in gcirocks.ebm ebm hello.bw 512 512 64' and I get this error: |
16:27.10 | melfo | ' |
16:27.12 | melfo | rt_ebm_import4() file 'hello.bw' is too short 332 < 32768 |
16:27.13 | melfo | rt_db_external5_to_internal5(gcirocks.ebm): import failure |
16:27.15 | melfo | db_recurse() rt_db_get_internal(gcirocks.ebm) FAIL |
16:27.16 | melfo | ' |
16:27.18 | melfo | Playing around with the width, height and extrusion. I managed to get some red lines to appear. So I think the problem should be the conversion between png to bw. Can someone point out to me what I'm doing wrongly? |
16:29.39 | *** join/#brlcad shardulc (~shardul@122.170.37.169) |
16:34.39 | *** join/#brlcad merzo (~merzo@31-24-132-95.pool.ukrtel.net) |
16:36.58 | ``Erik | melfo: pix-bw will convert from the pix format, you might need to do a png-bw instead |
16:37.46 | ``Erik | and for a 512x512, the file size should be exactly 32768, so that's a way to check if you're feeding it the right stuff |
17:02.56 | *** join/#brlcad michaelx2001 (~Thunderbi@61.245.163.33) |
17:11.10 | shardulc | I'm doing the dead code elimination task https://www.google-melange.com/gci/task/view/google/gci2014/5338260117127168 |
17:11.11 | gcibot | Identify and eliminate dead code (100+ lines) #2 |
17:11.11 | gcibot | Status: Claimed (3 days 15 hrs 39 min) |
17:11.11 | gcibot | Mentor(s): Popescu Andrei, Mihai Neacsu, Sean |
17:11.31 | shardulc | and I've found a .c file which declares only one method, which is never used |
17:12.11 | shardulc | deleting the file, removing it from CMakeLists.txt, removing the declaration from the header, and running 'make' and 'make test' succeeds |
17:12.30 | shardulc | so does this count as dead code elimination? |
17:16.26 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
17:17.16 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
17:23.39 | shardulc | ``Erik:, are you there? |
17:49.38 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
17:55.30 | Notify | 02GCI:brlcad * 5773120388464640 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
18:40.03 | *** join/#brlcad gcibot (ignacio@unaffiliated/ignaciouy/bot/gcibot) |
18:45.17 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
18:54.56 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.155.117) |
20:01.01 | Notify | 02GCI:ralpt3748752_qejwhe * 6464160023969792 : Task Claimed - I would like to work on this task. |
20:05.19 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.155.117) |
20:14.34 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
20:31.59 | Notify | 02GCI:ralpt3748752_qejwhe * 5332242800836608 : Ready for review - The work on this task is ready to be reviewed. |
20:39.44 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) |
22:19.40 | *** join/#brlcad Konrado (~Konrado@196.202.236.56) |
22:26.10 | MarcTannous | Good night everyone :D |
23:14.35 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
23:17.13 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |