00:07.39 | aten | ok, thanks |
00:37.10 | brlcad | np |
00:49.41 | CIA-22 | BRL-CAD: 03brlcad * r31534 10/brlcad/trunk/misc/win32-msvc9/libged/libged.vcproj: sync with vc8 project files, add a slew missing |
00:52.44 | CIA-22 | BRL-CAD: 03brlcad * r31535 10/brlcad/trunk/misc/win32-msvc9/libged/libged.vcproj: contemplated renaming bigE.c to E.c, but reverted (all but this) |
00:54.39 | CIA-22 | BRL-CAD: 03brlcad * r31536 10/brlcad/trunk/ (11 files in 2 dirs): consistency update, make all libged's argv parameters be declared as arrays of pointers instead of pointers to pointers even if they're used the same |
03:08.11 | CIA-22 | BRL-CAD: 03starseeker * r31537 10/brlcad/trunk/doc/docbook/ (3 files in 2 dirs): Add start of lesson 3 |
03:26.56 | CIA-22 | BRL-CAD: 03starseeker * r31538 10/brlcad/trunk/doc/docbook/ (2 files in 2 dirs): Add start of lesson 4 |
04:13.30 | starseeker | Humm - http://news.slashdot.org/article.pl?sid=08/06/21/203240 |
06:19.20 | *** join/#brlcad clock_ (n=clock@77-56-92-233.dclient.hispeed.ch) |
07:27.49 | CIA-22 | BRL-CAD: 03homovulgaris * r31539 10/brlcad/trunk/src/libpc/ (6 files): ws, reverting changes from 31450-31453 |
07:28.20 | brlcad | woot |
07:36.24 | brlcad | hum, that doesn't look like everything |
07:36.38 | brlcad | that's just a bit of ws |
07:42.08 | homovulgaris | huh.. yikes..i double checked it this time.. what were the other modifiications ? |
09:23.35 | *** join/#brlcad thing0 (n=ric@124-169-73-95.dyn.iinet.net.au) |
10:45.24 | *** join/#brlcad elite01 (n=elite01@dslb-088-071-040-234.pools.arcor-ip.net) |
11:03.52 | *** join/#brlcad dtidrow (n=dtidrow@c-69-255-182-248.hsd1.va.comcast.net) |
11:04.59 | *** part/#brlcad thing0 (n=ric@124-169-73-95.dyn.iinet.net.au) |
11:11.51 | *** join/#brlcad elite01 (n=elite01@dslb-088-071-040-234.pools.arcor-ip.net) |
11:49.29 | CIA-22 | BRL-CAD: 03brlcad * r31540 10/brlcad/trunk/src/libpc/ (7 files): take two, sanother round of ws and style conformancy changes. try not to wipe these out. ;-) |
11:51.27 | *** join/#brlcad docelic (n=docelic@78.134.207.247) |
11:53.22 | CIA-22 | BRL-CAD: 03brlcad * r31541 10/brlcad/trunk/include/ (pc.h raytrace.h): commend cleanup |
12:03.21 | CIA-22 | BRL-CAD: 03brlcad * r31542 10/brlcad/trunk/NEWS: |
12:03.21 | CIA-22 | BRL-CAD: I made all platform installers use consistent naming conventions, outlined in |
12:03.21 | CIA-22 | BRL-CAD: the HACKING file. In particular, the Windows installer is now more |
12:03.21 | CIA-22 | BRL-CAD: version-aware, installing into a versioned subdir by default (similar to how we |
12:03.22 | CIA-22 | BRL-CAD: distribute for other platforms) and allowing per-version uninstalls. |
12:17.48 | CIA-22 | BRL-CAD: 03brlcad * r31543 10/brlcad/trunk/src/other/openNURBS/ (opennurbs_light.cpp opennurbs_light.h): |
12:17.48 | CIA-22 | BRL-CAD: (re)apply the intent of the changes prompted by tom browder in sf patch 1998134 |
12:17.48 | CIA-22 | BRL-CAD: (Eliminate Warnings from g++ for opennurbs_light.h) but also making the extra |
12:17.48 | CIA-22 | BRL-CAD: changes to the cpp file to match. declaring a bool return value as const is |
12:17.48 | CIA-22 | BRL-CAD: meaningless |
12:24.36 | *** join/#brlcad Mouette (n=root@123-194-167-3.dynamic.kbronet.com.tw) |
12:24.55 | Mouette | i had entered |
12:27.15 | brlcad | hello Mouette |
12:27.23 | Mouette | hihi |
12:28.04 | brlcad | I see you were able to upload to anon ftp |
12:28.18 | Mouette | Mmm |
12:28.22 | brlcad | or at least are in the process of doing so |
12:28.51 | brlcad | 25MB and counting .. how big is it? |
12:29.03 | Mouette | 180MB |
12:29.09 | brlcad | heh |
12:29.16 | brlcad | that's one slow upload :) |
12:29.51 | brlcad | and a huge dist .. is that compressed? |
12:30.01 | Mouette | C'est pas grave,we can wait |
12:30.27 | Mouette | i forget compressed it |
12:30.30 | Mouette | ...... |
12:31.19 | brlcad | it doesn't need to be, I can make it a .pkg.gz .pkg.bz2 |
12:31.37 | Mouette | ok,thanks |
12:31.50 | Mouette | and i need you test it |
12:32.11 | brlcad | where does it install to? |
12:32.20 | Mouette | because it not be compiled in a pure system |
12:32.35 | brlcad | what were the configure options? |
12:32.43 | Mouette | /opt/Brl-CAD |
12:32.50 | brlcad | eep |
12:33.05 | brlcad | lower/upper mixed case is a no-no |
12:33.31 | brlcad | should be either 'brlcad' or 'BRL-CAD', not other variations |
12:33.51 | Mouette | ok |
12:34.39 | Mouette | need i remake a pkg file? |
12:34.43 | brlcad | please :) |
12:35.01 | Mouette | ok,i stop it |
12:35.02 | brlcad | what were all of your configure options? |
12:35.09 | Mouette | and re-upload |
12:35.13 | brlcad | k |
12:35.51 | brlcad | running as root .. tsk tsk |
12:44.25 | Mouette | wait me,compressing |
12:47.01 | brlcad | what were all of your configure options? |
12:48.21 | Mouette | i don't know your mean. you means the result of "./configure" from source? |
12:49.14 | brlcad | Did you just run "./configure" with no options following it? |
12:49.32 | brlcad | you had to have used at least --prefix=/opt/brlcad to change it from /usr/brlcad |
12:49.50 | Mouette | no |
12:50.18 | brlcad | then.. what did you do? :) |
12:51.44 | Mouette | --enable-tcl-build --enable-tk-build --enable-itcl-build |
12:52.23 | brlcad | hence why I ask, you should use --enable-all --enable-optimized for a platform distribution :) |
12:53.17 | brlcad | it's not necessary to redo everything, but something to keep in mind for next time |
12:53.29 | *** join/#brlcad docelic_ (n=docelic@78.134.199.234) |
12:53.43 | brlcad | optimized will give about a 2x performance increase |
12:53.59 | brlcad | enable-all helps ensure that there are no external system dependencies in the binaries |
12:54.04 | *** join/#brlcad root_ (n=root@123-194-167-3.dynamic.kbronet.com.tw) |
12:55.11 | brlcad | at least none other than major ones like X11 and OpenGL |
12:57.22 | root_ | need you look config.cache? |
12:57.34 | brlcad | not really |
13:01.16 | root_ | i don't understand your means. how about X11 and OpenGL? |
13:03.02 | root_ | after i do ./configure, then make and get some erreurs. |
13:03.19 | root_ | then i modify some code |
13:03.27 | brlcad | did you not see my preceeding comments? |
13:05.26 | brlcad | http://paste.bzflag.bz/m3002fc62 |
13:05.37 | root_ | no. |
13:08.05 | root_ | and then?? |
13:10.06 | root_ | need you my source dir after compiling? |
13:10.37 | *** join/#brlcad piotrnikiel (n=piotrnik@cy243.internetdsl.tpnet.pl) |
13:10.52 | root_ | sorry,my english is bad, sometimes i don't understand your means |
13:10.59 | CIA-22 | BRL-CAD: 03brlcad * r31544 10/brlcad/trunk/src/tclscripts/helplib.tcl: |
13:10.59 | CIA-22 | BRL-CAD: increase the column spacing to 25 characters, making a max of 100 wide instead |
13:10.59 | CIA-22 | BRL-CAD: of 80 .. this is a real shame but stems from the problem that the command names |
13:10.59 | CIA-22 | BRL-CAD: are way too long on dgo_set_plOutputMode, dgo_set_transparency, |
13:10.59 | CIA-22 | BRL-CAD: dgo_set_outputHandler, and a few others. increasing the width makes it so you |
13:11.03 | CIA-22 | BRL-CAD: can iterate over the commands (while messing with default width wrapping) |
13:12.14 | brlcad | root_: and then nothing, just pointing out that next time you should use --enable-all --enable-optimized instead of the -build options you were using |
13:13.44 | root_ | can't "--enable-all", part of source get erreurs |
13:13.57 | root_ | sorry i am Mouette |
13:14.00 | brlcad | ah, that's what you meant |
13:14.08 | brlcad | heh, I know |
13:14.20 | brlcad | what errors? |
13:16.24 | root_ | let me recompile, because some Makefile context i delete some that compile get erreurs |
13:16.26 | piotrnikiel | hello, are there any Mac OSX BRL-CAD users? |
13:16.40 | brlcad | piotrnikiel: lots |
13:18.20 | piotrnikiel | Well, I've got a problem with BRL-CAD, which you probably seen before |
13:18.29 | piotrnikiel | .X Error of failed request: BadRequest (invalid request code or no such operation) |
13:18.30 | piotrnikiel | <PROTECTED> |
13:18.30 | piotrnikiel | <PROTECTED> |
13:18.37 | root_ | wait me |
13:24.10 | brlcad | piotrnikiel: yes, bugs in the new X11 update |
13:24.22 | brlcad | piotrnikiel: did you compile yourself or install binary? |
13:25.11 | root_ | upload finish,and wait me recompile...... |
13:25.58 | piotrnikiel | I installed binary and that's what i got |
13:26.02 | piotrnikiel | but i also compiled by myself |
13:26.09 | piotrnikiel | and |
13:26.39 | brlcad | root_: what are you recompiling? |
13:27.15 | piotrnikiel | when i configure with --enable-optimized it compiles well, but when starting mged, it says that i have tcl8.4 (apple's) and it needs tcl8.5 |
13:27.18 | root_ | rm -rf brlcad dir and restart download source |
13:28.00 | piotrnikiel | so i installed tcl8.5 from macports, and then it fails to compile |
13:28.05 | brlcad | piotrnikiel: unfortunately, there's not a whole lot that can be done about the 10.5 error at the moment .. it'll be a couple months before a fix is expected |
13:28.11 | brlcad | piotrnikiel: add --enable-all to the build |
13:28.19 | piotrnikiel | well, i ve got 10.4 ;) |
13:28.25 | brlcad | really? |
13:28.35 | brlcad | now that's odd |
13:29.10 | piotrnikiel | so i am today trying various combinations of configure, with aquatk, and with tcl&tk from ports, or from apple, and so on |
13:29.11 | brlcad | ppc or intel? |
13:29.13 | piotrnikiel | intel |
13:29.49 | brlcad | aquatk is for devs-only, it's not going to work for you |
13:30.08 | piotrnikiel | ok... i didn't know that |
13:30.10 | brlcad | neither will using system-installed tcl/tk because you don't have itcl/itk |
13:30.34 | brlcad | and even iff you did, it's not a frequently tested configuration on mac |
13:31.03 | brlcad | usually mac is tested with enable-all |
13:31.42 | piotrnikiel | ok. i'm now compiling it, and if it fails, I'll try enable-all |
13:31.50 | piotrnikiel | since i haven't tried it yet |
13:32.17 | brlcad | oh interesting, 129 is direct rendering |
13:32.49 | brlcad | you don't have direct render opengl support for some reason |
13:33.00 | piotrnikiel | well FYI if i start your binary with: mged -c |
13:33.02 | piotrnikiel | and choose X |
13:33.05 | brlcad | (you can add --without-opengl to get past that) |
13:33.11 | piotrnikiel | then i have the old X-server mged |
13:33.28 | brlcad | yeah, that's the main problem |
13:33.43 | brlcad | the ogl driver isn't failing gracefully |
13:33.57 | piotrnikiel | but if i start mged -c and run it with ogl, then the "129" error happens |
13:34.00 | brlcad | it should automatically fall back to indirect rendering, but decides to abort |
13:34.38 | piotrnikiel | my mac is pretty standard Macbook |
13:34.45 | piotrnikiel | and i never got any problems with opengl |
13:35.00 | piotrnikiel | but let my check the --enable-all |
13:35.12 | piotrnikiel | if it fails then I'll tell you |
13:35.17 | root_ | this is my config result ( ./configure --enable-all --enable-optimized): |
13:35.31 | brlcad | what we mean by opengl is not the same as what you probably think it means |
13:35.32 | root_ | Java Developer Kit support ...........: no |
13:35.47 | root_ | Build 64-bit release .................: no (32-bit) |
13:35.48 | brlcad | it's just a low-level rendering mode for us, no different/additional functionality |
13:35.59 | root_ | Print verbose compilation warnings ...: no |
13:36.09 | root_ | Print verbose compilation progress ...: no |
13:36.10 | brlcad | root_: those are fine |
13:36.15 | piotrnikiel | I thought you mean just the system libraries |
13:37.17 | brlcad | it's related, but it's more what we do when that display manager driver is turned on/off |
13:37.54 | brlcad | and in this case, there's an additional complexity of going through X11 and through the X OpenGL layer |
13:38.54 | brlcad | we ask the X server for a direct rendering context, normally it either says here you go or sorry can't but here use this indirect one |
13:39.05 | brlcad | instead it's saying just "sorry, goodbye" |
13:39.13 | piotrnikiel | ;) |
13:39.39 | brlcad | either way, the simplest thing to do is just turn the ogl layer off |
13:39.49 | brlcad | you don't miss anything |
13:59.18 | root_ | ok,i look the first erreues,and i modify |
14:00.51 | root_ | in src/other/openNURBS/opennurbs_point.cpp |
14:01.36 | brlcad | what version are you compiling? |
14:01.50 | root_ | i delete #ifdef HAVE_IEEEFP_H and #else, # include <math.h>, #endif 4lines |
14:02.07 | root_ | 7.12.14 |
14:02.29 | root_ | and continuing |
14:03.23 | brlcad | okay |
14:03.45 | brlcad | root_: I suspect they don't get many solaris folks compiling openNURBS |
14:10.42 | *** join/#brlcad thing0 (n=ric@124-169-166-120.dyn.iinet.net.au) |
14:13.26 | brlcad | yay, automatic mged command test |
14:19.14 | *** join/#brlcad thing1 (n=ric@203-59-26-22.perm.iinet.net.au) |
14:31.51 | root_ | the second erreurs,i checking |
14:34.55 | root_ | in src/libtermio/termio.c 428,439, let me think how i deal with the problem in that time |
14:39.46 | root_ | add #include <fcntl.h>,#include <sys/types.h> 2 line,ad delete some ifndef....... |
14:39.57 | root_ | and continuing |
14:42.01 | root_ | the third erreur appear. |
14:43.03 | piotrnikiel | got it, got it ;) |
14:43.08 | piotrnikiel | thank you sean |
14:43.19 | brlcad | piotrnikiel: glad to hear it! |
14:43.20 | piotrnikiel | enable-all really sorted everything out well |
14:43.44 | root_ | in src/adrt/master/,i haven't ability to deal with it, so i modify the Makefile in src/adrt |
14:44.34 | *** join/#brlcad madant (n=homovulg@202.63.233.61) |
14:45.52 | root_ | i delete the context "master" in Makefile,Makefile.in,and Makefile.am in src/adrt |
14:46.01 | root_ | and continuing |
14:46.35 | CIA-22 | BRL-CAD: 03brlcad * r31545 10/brlcad/trunk/src/libtermio/termio.c: include fcntl.h for solaris, thx Mouette |
14:46.55 | brlcad | root_: adrt isn't important |
15:03.06 | root_ | compile finish |
15:03.23 | root_ | installing and testing it |
15:05.25 | root_ | in installing,a tcl erreurs,i am dealing with it |
15:06.42 | root_ | in src/other/tcl/unix/Makefile |
15:08.10 | root_ | in the Makefile, SHELL=/bin/sh become /usr/bin/bash |
15:09.35 | root_ | and src/other/tk/unix/Makefile is also |
15:10.21 | brlcad | we try not to modify anything in src/other |
15:10.34 | brlcad | unless it's something that causes a hard failur |
15:20.26 | root_ | install finish and test it, it look like ok in my machine. |
15:20.58 | root_ | my process is finish |
15:21.27 | brlcad | root_: if you run "cd /tmp && /opt/bin/benchmark" |
15:21.48 | brlcad | what does it report at the end? |
15:21.53 | brlcad | should be a number |
15:21.55 | brlcad | in a box |
15:22.16 | brlcad | (takes about 9 minues to run) |
15:22.53 | root_ | RT reports the following version information: |
15:22.53 | root_ | BRL-CAD Release 7.12.4 The BRL-CAD Raytracer RT |
15:22.53 | root_ | BRL-CAD Release 7.12.4 The BRL-CAD Ray-Tracing Library |
15:22.53 | root_ | BRL-CAD Release 7.12.4 The BRL-CAD Numerical Computation Library |
15:22.53 | root_ | BRL-CAD Release 7.12.4 The BRL-CAD Utility Library |
15:22.54 | root_ | Minimum run time is 3 minutes, 12 seconds |
15:22.56 | root_ | Maximum run time is 30 minutes |
15:22.58 | root_ | Estimated time is 9 minutes, 36 seconds |
15:23.04 | root_ | Running the BRL-CAD Benchmark tests... please wait ... |
15:23.06 | root_ | +++++ moss |
15:23.08 | root_ | Frame 0: 357882 rays in 1.40 sec = 255252.77 rays/sec (RTFM) |
15:23.10 | root_ | Frame 1: 715764 rays in 2.69 sec = 266573.31 rays/sec (RTFM) |
15:23.12 | root_ | Frame 4: 5726112 rays in 20.19 sec = 283580.98 rays/sec (RTFM) |
15:23.18 | brlcad | eek |
15:23.21 | brlcad | not the whole thing :) |
15:23.34 | brlcad | way too much for irc |
15:23.47 | brlcad | wait until it finishes |
15:24.01 | root_ | ok |
15:24.11 | root_ | and then? |
15:25.00 | brlcad | there will be a #*#*#* box, print the two lines inside |
15:25.01 | root_ | look the end part? |
15:25.14 | root_ | ook |
15:25.36 | brlcad | or "cat summary" |
15:30.12 | root_ | Output was saved to run-3187-benchmark.log from /tmp |
15:30.12 | root_ | Benchmark testing complete. |
15:30.24 | root_ | Benchmark results indicate an approximate VGR performance metric of 1626 |
15:30.25 | root_ | Logarithmic VGR metric is 3.21 (natural logarithm is 7.39) |
15:30.35 | root_ | is this? |
15:31.49 | root_ | is this fine? |
15:37.03 | brlcad | that's it, thanks |
15:54.08 | root_ | ? |
15:56.32 | *** join/#brlcad Elperion (n=Bary@p5B14DE39.dip.t-dialin.net) |
16:42.38 | ``Erik | w00t, got my experiment box up |
16:43.33 | brlcad | which is that? |
17:03.49 | ``Erik | the wally world special that I souped up, running fbsd-current |
17:04.11 | ``Erik | one of the drives was shot which was preventing the entire machine from booting :/ |
17:04.24 | ``Erik | like, not even trying to post |
17:07.28 | brlcad | finally updates ze fresh meat |
17:45.21 | *** join/#brlcad elite01 (n=elite01@dslb-088-071-040-234.pools.arcor-ip.net) |
17:50.20 | CIA-22 | BRL-CAD: 03brlcad * r31546 10/brlcad/trunk/src/proc-db/tire.c: add an automatic options usage statement to the help and don't ignore invalid options. clean up the usage printing a little bit too. |
17:56.27 | CIA-22 | BRL-CAD: 03brlcad * r31547 10/brlcad/trunk/regress/ (Makefile.am mged.sh): |
17:56.27 | CIA-22 | BRL-CAD: add a new regression test for mged. it makes sure mged will run, can create a |
17:56.27 | CIA-22 | BRL-CAD: geometry database, and then evalutes the commands available. for every command |
17:56.27 | CIA-22 | BRL-CAD: available, it makes sure that it exits, runs successfully without reporting an |
17:56.27 | CIA-22 | BRL-CAD: error, and has a help/usage statement. this has already unvelieved a few issues |
17:56.30 | CIA-22 | BRL-CAD: that should get fixed (edcolor kicking off an editor, rt-tools crashing with a |
17:56.32 | CIA-22 | BRL-CAD: bu_log write error, few commands missing (recent libged changes)). |
17:57.04 | ``Erik | does some more updating on the old machine named 'the new bz' |
17:57.12 | brlcad | cool |
17:57.27 | brlcad | almost did that this weekend |
17:57.29 | brlcad | *almost* |
17:57.39 | brlcad | instead wanted to get some coding done |
17:58.26 | CIA-22 | BRL-CAD: 03brlcad * r31548 10/brlcad/trunk/regress/mged.sh: oops, numeric test |
17:59.22 | ``Erik | I'm just running cvsup, mebbe building world and then doing a portupgrade... no migration tuff |
17:59.25 | ``Erik | tuff |
17:59.26 | ``Erik | stuff |
17:59.41 | ``Erik | sssssssssssssssssstuff. damn s key |
18:20.41 | *** join/#brlcad clock_ (n=clock@77-56-81-5.dclient.hispeed.ch) |
18:47.56 | CIA-22 | BRL-CAD: 03brlcad * r31549 10/brlcad/trunk/NEWS: fixed typo |
19:30.23 | *** join/#brlcad thing0 (n=ric@124-169-73-95.dyn.iinet.net.au) |
20:03.53 | *** join/#brlcad Axman6_ (n=Axman6@pdpc/supporter/student/Axman6) |
20:16.54 | brlcad | ``Erik: you might like this: http://www.pawfal.org/Software/fluxus/ |
21:41.35 | *** join/#brlcad dtidrow (n=dtidrow@c-69-255-182-248.hsd1.va.comcast.net) |